Over 1 million tech questions and answers.

Event 1001 Windows Error Reporting

Q: Event 1001 Windows Error Reporting

Windows Vista Business - Dell Desktop - IE9 Application Crash

A couple weeks ago I decided to download IE9 since I have been using Chrome mostly and every so often Firefox. Regardless, IE9 Crashes and loops with Windows error reporting prompts until close is clicked heavily or the application is force closed. I have included the event viewer information below. Im troubleshooting now but was also curious about some of the causes associated with this error.


INFORMATION entry via Event Viewer

Event 1001 Windows Error Reporting

Fault bucket 2511977869, type 1
Event Name: APPCRASH
Response: None
Cab Id: 0

Problem signature:
P1: iexplore.exe
P2: 9.0.8112.16421
P3: 4d76255d
P4: igdumdx32.dll
P5: 8.15.10.2413
P6: 4de942fb
P7: c0000005
P8: 00009754
P9:
P10:

Attached files:
C:\Users\James\AppData\Local\temp\WER45AE.tmp.version.txt

These files may be available here:

ERROR via Event Viewer

Faulting application iexplore.exe, version 9.0.8112.16421, time stamp 0x4d76255d, faulting module igdumdx32.dll, version 8.15.10.2413, time stamp 0x4de942fb, exception code 0xc0000005, fault offset 0x00009754, process id 0x17f8, application start time 0x01cd0d684160eda5

RELEVANCY SCORE 200
Preferred Solution: Event 1001 Windows Error Reporting

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: Event 1001 Windows Error Reporting

Hi
One solution appears to be to turn off accellerated graphics in internet explorer 9: -

How to Disable Hardware Acceleration (GPU Rendering) in Microsoft Internet Explorer 9 (IE9) to Fix Font Problem? - Tweaking with Vishal

The other is to update the graphics drivers from Intel: -

Intel? Driver Update Utility

Read other 3 answers
RELEVANCY SCORE 108.4

help me plz for this error : Crash in the fifa 17 :

Event id : 1001

Fault bucket , type 0 Event Name: StoreAgentScanForUpdatesFailure0 Response: Not available Cab Id: 0

Problem signature: P1: WSAutoUpdate P2: 80070422 P3: 10586 P4: 589 P5: Windows.Desktop P6: P7: P8: P9: P10:

Attached files: C:\Users\SAEED-PC\AppData\Local\Temp\WERE616.tmp.WERInternalMetadata.xml

These files may be available here: C:\ProgramData\Microsoft\Windows\WER\ReportQueue\NonCritical_WSAutoUpdate_95205dc5609fd59e5eab4b91e971fb728a3f358_00000000_cab_01e2e635

Analysis symbol: Rechecking for solution: 0 Report Id: c7fed44a-898b-11e6-8761-d54e541e477a Report Status: 4 Hashed bucket:

how to fixed ?!?!

Read other answers
RELEVANCY SCORE 82.8

Hi all,
One of our PCs shutdown twice and one day I checked to see why it was shutting down and I got an error that was:




-


System













-


Provider









[
Name]


Microsoft-Windows-WER-SystemErrorReporting









[
Guid]


{ABCE23E7-DE45-4366-8631-84FA6C525952}









[
EventSourceName]


BugCheck

















-


EventID


1001









[
Qualifiers]


16384

















Version


0

















Level


2

















Task


0

















Opcode


0

















Keywords


0x80000000000000

















-


TimeCreated









[
SystemTime]


2015-08-04T20:33:25.000000000Z

















EventRecordID


4418

















Correlation

















-


Execution









[
ProcessID]


0









[
ThreadID]


0

















Channel


System

















Computer


XXXXXXXXXXX

















Security






 




-


EventData









param1


0x0000004a (0x0000000074a32e09, 0x0000000000000002, 0x0000000000000000, 0xfffff880081f6b60)









param2


C:\windows\MEMORY.... Read more

Read other answers
RELEVANCY SCORE 75.2

Alright, started getting the 1001 BugCheck crash with Event 41 Kernel-Power BSOD a few times not long ago, widely spaced out incidents (it will lock up, make a very weird repetitive noise through my stereo speakers and will also get black and white bars across the screen before the blue screen turns up and asks for restart option choice). And Event 4 k57nd60a has been ongoing for as long as I can remember.

Any ideas?
Event 1001, BugCheck
The computer has rebooted from a bugcheck. The bugcheck was: 0x0000003b (0x00000000c0000005, 0xfffff8800646843a, 0xfffff880028c5a10, 0x0000000000000000). A dump was saved in: C:\Windows\MEMORY.DMP. Report Id: 041312-18205-01.

- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Microsoft-Windows-WER-SystemErrorReporting" Guid="{ABCE23E7-DE45-4366-8631-84FA6C525952}" EventSourceName="BugCheck" />
<EventID Qualifiers="16384">1001</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2012-04-13T14:05:58.000000000Z" />
<EventRecordID>39029</EventRecordID>
<Correlation />
<Execution ProcessID="0" ThreadID="0" />
<Channel>System</Channel>
<Computer>M... Read more

A:Event 1001 BugCheck Event 41 Kernel-Power Event 4 k57nd60a

Memory exception but we need to examine the DMP files to find out why.

We do need the DMP file as it contains the only record of the sequence of events leading up to the crash, what drivers were loaded, and what was responsible.

If you are overclocking STOP
We could also use some system information, which you can get easily by running msinfo32.
To do that go to start>run>type msinfo32>enter

When it is finished running go to file>save>name it and upload to us here.
You may be able to get the DMP files without crashing by booting into safe mode (F8) with networking.

To enable us to assist you with your computer's BSOD symptoms, upload the contents of your "\Windows\Minidump" folder.

The procedure:





Quote:
* Copy the contents of \Windows\Minidump to another (temporary) location somewhere on your machine.
* Zip up the copy.
* Attach the ZIP archive to your post using the "paperclip" (file attachments) button.
*If the files are too large please upload them to a file sharing service like "Rapidshare" and put a link to them in your reply.


To ensure minidumps are enabled:





Quote:
* Go to Start, in the Search Box type: sysdm.cpl, press Enter.
* Under the Advanced tab, click on the Startup and Recovery Settings... button.
* Ensure that Automatically restart is unchecked.
* Under the Write Debugging Information header select Small memory dump (256 kB) in the dropdown box (the 256kb ... Read more

Read other 9 answers
RELEVANCY SCORE 74.8

Hello, I could use some help with a blue screen issue, I've been having for a little while now, not sure how it happened or why but whenever I'm AFK from my computer for to long it gives me a blue screen crash with the error 0x0000001a (0x0000000000000031, 0xffffffa800aa60900,0xffffff8800d56700, 0xffffff8a0023351ac) page fault in non-paged area, I'm feeling that I should note also the the error number has changed recently but has been the same cause and result, if needed I'll post that to, also I'm rather techno illiterate so please keep it as simple as possible for me

Edit: sorry forget to upload this

A:DSOD while AFK, bug report error 0x0000001a event ID 1001

Welcome to the forum,

It looks like IObit is causing it, there's only one dump but it gets the flag,


Code:
BugCheck 50, {ffffffffffffffd0, 1, fffff800030ae75d, 0}

*** WARNING: Unable to verify timestamp for pffilter.sys
*** ERROR: Module load completed but symbols could not be loaded for pffilter.sys
Loaded symbol image file: pffilter.sys
Image path: \??\C:\Program Files (x86)\IObit\Protected Folder\pffilter.sys
Image name: pffilter.sys
Timestamp: Sun Nov 18 18:07:22 2012 (50A9945A)
CheckSum: 0000F643
ImageSize: 00028000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
I would get rid of anything IObit and see if it helps.

Here's a tutorial for that,

IObit Products - Uninstall Completely

Read other 1 answers
RELEVANCY SCORE 73.2

Hi all,

I recieved my new notebook clevo170hm yesterday. The laptop was working fine for 2 days, but today it started behaving weirdly when I tried connecting it to the LAN internet and it said "no network access" and "unidentified network". I remembering installing a windows update and after a reboot this error came up, before the update things were good . Here's the event viewer error description:

Code:
Your computer was not assigned an address from the network (by the DHCP Server) for the Network Card with network address 0x0090F5C1E007. The following error occurred: 0x79. Your computer will continue to try and obtain an address on its own from the network address (DHCP) server.
Apart from that I tried connecting to my wifi network, still gave me the same error " unidentified network". Here is the cmd command result for "ipconfig/all"

Code:
C:\>ipconfig/all

Windows IP Configuration

Host Name . . . . . . . . . . . . : #####-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

Ethernet adapter Local Area Connection:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : JMicron PCI Express Gigabit Ethernet Adapter
Physical Address. . . . . . . . . : 00-90-F5-C1-E0-07
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes... Read more

A:Network connection error 0x79, IP not assigned by DHCP. Event ID 1001

Forgot to mention, I do not have a router or modem. I am living in university accommodation hence all I got on the other end is a n ethernet socket.

Read other 1 answers
RELEVANCY SCORE 71.6

I am randomly getting this BSOD. Sometimes the PC is only on for around 5 minutes, sometimes it happens after the PC has been on for a few hours or even days. No matter if I'm on the Internet or not, creating documents, virus scanning, or just at idle time. Happens anytime. Here is the BSOD specifics from the Event Viewer Bugcheck:

0x000000c5 (0x05d7c0d4, 0x00000002, 0x00000001, 0x82f2c943)
Event ID - 1001
Qualifiers - 16384
Guid - {ABCE23E7-DE45-4366-8631-84FA6C525952}
Keywords - 0x80000000000000

System specs:
Windows 7 Ultimate 32-bit
NVidia nForce 780i SLI S775 Motherboard
Dual NVidia GeForce GTX285 648m 1GB DDR3 (SLI Bridged) Graphics Cards
Dual Western Digital VELOCIRAPTOR 300GB 10,000 rpm Hard Drivres (RAID 0-Stripe Array)
4gb Corsair Dominator XMS2 8500 DDR2 1066 RAM Memory
Intel Core 2 QX9650 3.0GHz QuadCore Processor (no overclocking)
Norton Internet Security 2012

I always keep all software & drivers for everything updated, especially the NVidia drivers & Windows Updates. I kind of suspect the problem may be with the NVidia graphics cards or drivers, not sure tho. Could possibly be the Norton Internet Security. Enclosed is the .zip folder. Any help would be greatly appreciated. Thank you.

A:BSOD 0x000000c5 (Event ID-1001) Windows 7

Welcome
Your reports are hinting at a driver, lets try to ascertain which one or if it is indeed a driver.
Driver Verifier
I'd suggest that you first backup your data and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Windows 7 Startup Repair feature).

In Windows 7 you can make a Startup Repair disk by going to Start....All Programs...Maintenance...Create a System Repair Disc - with Windows Vista you'll have to use your installation disk or the "Repair your computer" option at the top of the Safe Mode menu .

Then, here's the procedure:
- Go to Start and type in "verifier" (without the quotes) and press Enter
- Select "Create custom settings (for code developers)" and click "Next"
- Select "Select individual settings from a full list" and click "Next"
- Select everything EXCEPT FOR "Low Resource Simulation" and click "Next"
- Select "Select driver names from a list" and click "Next"
Then select all drivers NOT provided by Microsoft and click "Next"
- Select "Finish" on the next page.

Reboot the system and wait for it to crash to the Blue Screen. Continue to use your system normally, and if you know what causes the crash, do that repeatedly. The objective here is to get the system to crash because Driver Verifier is stressing the dr... Read more

Read other 9 answers
RELEVANCY SCORE 70.4

Hi,

My computer runs for all practical purposes I guess but I can certainly feel that there is good reason for all event log errors while working on my windows 7. For example, the blue screen of death appears once every 3-4 months, or earlier today the computer just started getting really slow (given my 8GB memory this raaarely happens), or "windows explorer" would randomly crash (however, when this does happen it usually happens just once during a session then it restarts and it's fine so it's not preventing me from using my computer it's just...something's wrong and it shouldn't be and I want to fix it! )...I have rows and columns of event log errors such as event ID 1000, event ID 80, 1001, 1002, and much more but since addressing all of them at once will probably invade the entire forum, I prefer to address them perhaps in little bundles so I don't annoy the experts and exploit the resources.
Also, I have a feeling that once I start fixing some of them, many others will disappear automatically. I'm sorry if my post is a bit vague but this is my first time here so please be patient with me and just tell me whatever information you need from me to narrow things down and I will do that.

I have provided a link to a few of my event logs to OneDrive which I appropriately labeled to make it easier to distinguish which one is which.

http://1drv.ms/12mlhJJ

Thank you so much in advance.

A:Event log swarm! Including event ID's 1000, 80, 11, 1001+2, etc...

Hello and welcome Allen mate just to try a few rather obvious bits and pieces and to start eliminating stuff run these the first two in safe mode if you have to then the malwares as long as the machine keeps running.

http://www.sevenforums.com/tutorials/1538-sfc-scannow-command-system-file-checker.html

http://www.sevenforums.com/tutorials/433-disk-check.html < use the /f and /r options in Option2 if necessary

http://www.superantispyware.com/

http://www.malwarebytes.org/products/malwarebytes_free/

http://www.bleepingcomputer.com/download/adwcleaner/

download from bleeping computer ? delete any rubbishthese find.

I must say it is refreshing to find that a member has included the system specs for a change - well done!

Read other 3 answers
RELEVANCY SCORE 70.4

Hi all,

I'm having an issue with an Events 1001 and/or 902 crash when I run GTA V it occurs at random times, and without warning. I've reset Windows 10 Pro, uninstalled and reinstalled the game but I keep getting the crashes. Windows 10 Pro should be up to date, I have my doubts about my mouse as the manufacturer hasn't released updated drivers in some time, and the rest of my peripherals/utilities should be up to date. Thanks in advance

A:Event 1001 and Event 902 at Random times while running GTA V

Hi,

Try updating your network driver (iqvw64e.sys) here: -

https://downloadcenter.intel.com/

Read other 0 answers
RELEVANCY SCORE 68.8

Hi there.

I've spent a good 10 hrs searching for a fix to my problem - including SevenForums - with no success...

I just purchased a Clevo P170HM with i7-2920XM processor and GTX 485 graphics card. It's an awesome system. I went into event log, and after noticing a few critical and error events I decided to fix the important ones...

I've done this - except for the Error - Event 1001 DHCP Client:

"
Your computer was not assigned an address from the network (by the DHCP Server) for the Network Card with network address 0x0016EB059618. The following error occurred: 0x79. Your computer will continue to try and obtain an address on its own from the network address (DHCP) server."

This is the most common of the 1001 events, but others have network address' of 0x001F81000100 and 0x00158315A1C0, all with the same error 0x79.

Many people have thoughts on what's causing it, so here's what I've done:

- Confirmed all my network drivers etc are all up to date
- Followed and completed the full Windows help file on the topic
- This includes pinging myself and the DNS address' to confirm responses
- Completed a release and renewal of the ipconfig command on the DHCP lease.
- Disabled ipv6 in all network adaptors
- Disabled ICS in all network display adaptors (after restart, checking services)
- Disabled/enabled Bonjour to eliminate
- Checked services of DNS auto, DHC auto etc etc
- Turned off Virgin Broadband on one restart to see if the error occured (which... Read more

A:Event Log Event 1001: DHCP Client

I've had a problem with DHCP renew not working properly for months, not sure when it started. I've tried registry settings, new drivers, etc. Nothing has worked. Often I only lose my IP address for a second or less, but of course, this is enough for any open connection to drop.

After DHCP renew fails to the point of my connection being lost, some other DHCP mechanism kicks in which (almost) always works at once.

Right now, however, the problem seems to have gone away.

What I did was uninstall the driver from my network card (Realtek RTL8168D/8111D), again and again, until it was no longer possible to uninstall the remaining driver (Windows default I'm guessing).

Then, after some time, an optional update appeared in Windows Update. It was a network driver that was released by Microsoft on May 14, 2009.

After I installed this driver, DHCP renew has never failed.

I'm sorry if this gives you false hope in solving your issue (which perhaps is different), I just had to provide the one thing that actually worked for me. I know your frustration!

Read other 1 answers
RELEVANCY SCORE 68.4

How serious is this? I'm running on a Dell laptop with a Intel(R) ICH9M-E/M SATA AHCI Controller.

It is saying that I should back up all of my important files because of possible hard drive failure.

PLEASE HELP? I don't know how to fix this because I don't know what it means.
 

A:Hard drive is reporting a Smart Event error message

It telling you your hard drive is on its way out. You can try running a check disk and see if that helps. But to be on the safe side you should back up your personal files.
 

Read other 8 answers
RELEVANCY SCORE 68.4

So my fortnite freezes and crashes without a error code from UE4 when i go into the windows logs i get this message:

Fel-bucket , typ 0
Händelsenamn: LiveKernelEvent
Svar: Inte tillgänglig
Kabinett-ID: 0

Problemsignatur:
P1: 141
P2: ffffae8746c864a0
P3: fffff80236c3fea8
P4: 0
P5: 3344
P6: 10_0_17134
P7: 0_0
P8: 768_1
P9: 
P10: 

Bifogade filer:
\\?\C:\WINDOWS\LiveKernelReports\WATCHDOG\WATCHDOG-20180722-1007.dmp
\\?\C:\WINDOWS\TEMP\WER-2563031-0.sysdata.xml
\\?\C:\ProgramData\Microsoft\Windows\WER\Temp\WER5DD1.tmp.WERInternalMetadata.xml
\\?\C:\ProgramData\Microsoft\Windows\WER\Temp\WER5E11.tmp.xml
\\?\C:\ProgramData\Microsoft\Windows\WER\Temp\WER5E2F.tmp.csv
\\?\C:\ProgramData\Microsoft\Windows\WER\Temp\WER5E6F.tmp.txt

Filerna kan vara tillgängliga här:
C:\ProgramData\Microsoft\Windows\WER\ReportQueue\Kernel_141_93315b5537862960f7b2a2928cccd69d046a9_00000000_cab_27975e6e

Analyssymbol: 
Kontrollerar lösning igen: 0
Rapport-ID: 34543b4d-d9e8-47ff-a47c-f1e667549458
Rapportstatus: 4
Hash-bucket: 
Cab-GUID: 0

I saw on another post they told me to freshly reinstall my drivers i did that but still no luck.

Graphics card is: AMD Radeon RX460 2GB.

Read other answers
RELEVANCY SCORE 67.2

Hi All,

urgent help require. recently i am facing big issue that my server auto restart itself. When i check the Event show as below:

Event ID:1005
Source: Save Dump
Description: unable to produce minidump file from the full dump file

Event ID: 1001
Source: 1001
Source: Save Dump
Description: the computer has rebooted from a bugcheck. The bugcheck was 0x00000027 (0xb550d76c, 0xb550d468, 0xb550d468, 0x8846165e). A dump was saved in C:windows\memory.dmp

Please advise and hope able to provide me a better solution to avoid my server restart itself again.

Thank You.
 

A:Windows Server 2003 auto restart - Event ID 1005 / 1001 (Source Save Dump)

Without seeing the minidumps this is your error per auhma.org:

0x00000027: RDR_FILE_SYSTEM
This is a rare and fairly obscure error condition. Memory management issues can be one cause, and adding additional RAM commonly will resolve this version of the problem.
 

Read other 10 answers
RELEVANCY SCORE 66.4

The past 3 days I have been having random freezes for no specific reason. I have run memtest86 an it found no errors. I have run the windows disk checking program as well with no errors. The only thing I recently installed into my computer hardware wise is a new graphics card the gtx 560ti. I have a minidump file if anyone wants to take a look at it. Also this freezing happens in firefox usually and I have to do a hard shutdown.

A:Event Id 1001 and Event Id 41 Freezing

  
Quote: Originally Posted by Star103


The past 3 days I have been having random freezes for no specific reason. I have run memtest86 an it found no errors. I have run the windows disk checking program as well with no errors. The only thing I recently installed into my computer hardware wise is a new graphics card the gtx 560ti. I have a minidump file if anyone wants to take a look at it. Also this freezing happens in firefox usually and I have to do a hard shutdown.



We do need the actual DMP file as it contains the only record of the sequence of events leading up to the crash, what drivers were loaded, and what was responsible.

You may be able to get the DMP files without crashing by booting into safe mode (F8) with networking.

To enable us to assist you with your computer's BSOD symptoms, upload the contents of your "\Windows\Minidump" folder.

The procedure:

* Copy the contents of \Windows\Minidump to another (temporary) location somewhere on your machine.
* Zip up the copy.
* Attach the ZIP archive to your post using the "paperclip" (file attachments) button.
*If the files are too large please upload them to a file sharing service like "Rapidshare" and put a link to them in your reply.
To ensure minidumps are enabled:

* Go to Start, in the Search Box type: sysdm.cpl, press Enter.
* Under the Advanced tab, click on the Startup and Recovery Settings... button.
* Ensure that Automatically restart ... Read more

Read other 5 answers
RELEVANCY SCORE 64

I am running XP Pro sp3 and am having an issue with it crashing with a blue screen error at approximately the same time every day, for about the last two months.

The event viewer records it every time as:

'source: save dump; category: none; event ID: 1001; description: the computer has rebooted from a bugcheck. The bugcheck was: 0x1000008e (0xc0000005, 0xb7dbbbf2, 0xab1398e8, 0x00000000). A dump was saved in: C:\WINDOWS\Minidump\Mini030310-01.dmp'

When the anti-virus scan (AVG9.0) I have scheduled for 8am every day scans there is no problem, but when the scan scheduled for 10pm runs, it crashes every time. When i disable the scan at 10pm, it doesn't crash. It will also crash when i attempt to run an anti rootkit scan with AVG.

I've scanned my entire PC with Spybot S&D, and it continually finds over 700 temp files that it cannot delete and that i cant find anywhere i check, and all it finds is browser cookies; I've scanned it with Malwarebytes and it finds nothing; every time i try running SDFix, it shuts down and instead creates a dummy file and runs that instead.

I've tried updating all my drivers and every program i have on my PC,but that hasn't fixed anything.

I haven't tried a fresh reinstall of windows yet, as i can't find my XP boot disk and don't know how to make another without already having one.

If anyone needs more information i will be more than happy to post it for them.

Thanks in advance

A:XP Pro crashing event id 1001

Download BlueScreenViewNo installation required.Double click on BlueScreenView.exe file to run the program.When scanning is done, go Edit>Select All.Go File>Save Selected Items, and save the report as BSOD.txt.Open BSOD.txt in Notepad, copy all content, and paste it into your next reply.Note: I am not the best at diagnosing memory dumps and BSOD's (occasionally I can), but I do know that using BlueScreenView will make it easier. It will give us an idea of what we're looking at....program incompatibility, drivers issues, malware, etc....or at least point us in the right direction.Also, could you please post your system specs? Brand/model, processor, RAM, etc...Use Speecy if you don't know any of your system's specs (don't worry about it being a beta. It won't crash your computer...it's just not an official public release...they're still working out the bugs and putting the shine on, so to speak. I use it all the time with no problems).

Read other 7 answers
RELEVANCY SCORE 64

Hi. I'm new to the forum and need help. I just got a blue screen claiming that windows was not shutdown properly and the system brought up this screen to protect my pc. The confusing part was that the pc had restarted 30mins after I had shut it down properly. Though during shutdown it had completed a windows update for windows defender. When I checked the event logs I saw this:

The computer has rebooted from a bugcheck. The bugcheck was: 0x000000fe (0x0000000000000008, 0x0000000000000006, 0x0000000000000006, 0xfffffa80094c5b20). A dump was saved in: C:\Windows\MEMORY.DMP. Report Id: 022610-35505-01.

A few hours beforehand I had plugged in my iTouch and updated it, windows automatically updated the ipod's drivers so I am wondering if that's the problem.

Another strange thing is that I noticed my Kaspersky hadn't done a full scan in 12 days when I have it set to run weekly. Windows defender (which is oddly no longer listed on my control panel) hasn't run since the 14th when that is set to run daily as well.

I tried to attach the dump file but it says i don't have permission. Though I'm the admin and only account on this pc.

Help please?

A:BSOD Event ID 1001

forgot to say that im running windows 7 64bit. i upgraded my vista pc with it a few months ago.

Read other 5 answers
RELEVANCY SCORE 64

i have had clean install of windows XP SP2 on my new system. it has crashed twice now since the install a couple hours back. a flash of BSOD and then restarted. Event viewer identifies it as event ID 1001 save dump. any idea what does it mean ? what needs to be done ? any help will be appreciated. Thanks.
 

A:BSOD :( . Event ID 1001.

Read other 7 answers
RELEVANCY SCORE 64

I'm trying to obtain a quicker boot time, but my Vista Event Viewer Window's System log keeps showing this following error,

<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-LanguagePackSetup" Guid="{7237fff9-a08a-4804-9c79-4a8704b70b87}" />
<EventID>1001</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>30</Task>
<Opcode>31</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2009-11-16T14:26:24.856Z" />
<EventRecordID>269762</EventRecordID>
<Correlation />
<Execution ProcessID="1872" ThreadID="1876" />
<Channel>System</Channel>
<Computer>XPUSA-LT</Computer>
<Security UserID="S-1-5-18" />
</System>
<EventData>
<Data Name="Error">0x80070032</Data>
</EventData>
</Event>

How can I get rid of it? Yes, I've uninstalled and reinstalled all language packs, but alas, the error's still there.

A:Event 1001, LanguagePackSetup

This link may help:http://technet.microsoft.com/en-us/library...129(WS.10).aspx

Read other 4 answers
RELEVANCY SCORE 64

So i recently built my computer and have been having a lot of trouble with Windows 7 (Im using the RC Build 7100) I use my computer for mainly gaming and not much more while Im playing games my computer tends to crash. At first I thought it was this Critical Error Event ID 41(The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly) which I fixed with this website but I started crashing while playing games again so I looked in my event viewer and found that Event ID 1001 (The computer has rebooted from a bugcheck. The bugcheck was: 0x0000001a (0x0000000000008886, 0xfffffa800258ced0, 0xfffffa8001ee5a70, 0x0000000000000500). A dump was saved in: C:\Windows\MEMORY.DMP. Report Id: 101109-13437-01.) happened but I cannot find a explanation to why so could any body please help me out. Also if this is to vague to what is happening tell me

A:Event Id 1001 BugCheck

  
Quote: Originally Posted by Auggy


So i recently built my computer and have been having a lot of trouble with Windows 7 (Im using the RC Build 7100) I use my computer for mainly gaming and not much more while Im playing games my computer tends to crash. At first I thought it was this Critical Error Event ID 41(The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly) which I fixed with this website but I started crashing while playing games again so I looked in my event viewer and found that Event ID 1001 (The computer has rebooted from a bugcheck. The bugcheck was: 0x0000001a (0x0000000000008886, 0xfffffa800258ced0, 0xfffffa8001ee5a70, 0x0000000000000500). A dump was saved in: C:\Windows\MEMORY.DMP. Report Id: 101109-13437-01.) happened but I cannot find a explanation to why so could any body please help me out. Also if this is to vague to what is happening tell me


Auggy

Can you go into c:\windows\minidump, zip the dump file (*.dmp) and upload it to us so we can examine it.

thanks

Ken

Read other 9 answers
RELEVANCY SCORE 63.6

hey, i've recently been getting BSOD, get it every few hours, and cant seem to be able to find out what it is i was wondering if anyone could help me, this problem started happening when i upgraded my pc from 4gb of ram to 6gb of ram.

i've tryed:
1. Resetting the CMOS
2. Flashing the Bios
3. move the RAM's in diffrent slots

here is what i get from the event viewer: (Event ID 1001)

The computer has rebooted from a bugcheck. The bugcheck was: 0x0000001e (0xffffffffc0000005, 0xfffff800028d308d, 0x0000000000000000, 0xffffffffffffffff). A dump was saved in: C:\Windows\MEMORY.DMP. Report Id: 122709-14289-01.
what else can i do ?

A:BSOD then restart Event ID: 1001

Reviewing the event viewer logs is one fast way to learn which device driver is the cause if this is software related. The manufacturer's name even if differing from that of a program or addon device is often the thing to look for and then remove even reinstall the program or driver set.

The external references here can also be considered like disabling the automatic restart when you get a BSOD in order to take notes on the blue screen error information displayed usually very briefly.






Quote:
Disable UAC. Control Panel > System And Maintenance > System > Advanced System Settings > Advanced tab > Under Startup And Recovery > Click Settings > Clear the Automatically Restart check box > click OK. Enable UAC.


Windows Vista, Windows 7 Stop Errors Or Blue Screen Of Death

The "0x0000001e" is common with the NT cored versions of Windows going back to 2000. The memory you added can also be considered a likely problem if a different brand or simply the same while the timings are different or you mixed two different types like standard with performance dimms since this began once you added in the additional dimms.

The first thing now would be removing those two to see if the problem suddenly clears up on it's own. The dimms themselves can be in perfect working order but simply a mismatch for the original memory.

If the problem persists following that you may be looking at a temp problem now being seen or even an... Read more

Read other 9 answers
RELEVANCY SCORE 63.6

I've just connected a new PC to my ADSL modem and I get the above error in the event log. Also stating
"Your computer was not assigned an address from the network (by the DHCP Server) for the Network Card with network address 0x00etc..... The following error occurred: 0x79. Your computer will continue to try and obtain an address on its own from the network address (DHCP) server."

I don't appear to have any connection problems apart from the error in the log.

Can anyone suggest a cause and remedy?

A:Event 1001 Dhcp client

I wonder if your ADSL modem/router has issues with IPv6? Try disabling it to see if the error stops. Hopefully you aren't using homegroups...

Read other 1 answers
RELEVANCY SCORE 63.6

Hi,

I need help with one of my pc having this error. I have no idea how to troubleshoot this issue. Help me please

Read other answers
RELEVANCY SCORE 63.6

The computer has rebooted from a bugcheck.  The bugcheck was: 0x000000fc (0xfffff80167e01fe8, 0x800000013fd33121, 0xffffd00021bff050, 0x0000000000000002). A dump was saved in: C:\WINDOWS\MEMORY.DMP. Report Id: 9243e000-eb06-496d-b427-1ca4d54c5012.
I have no idea what to do with this, it happened twice in just 5 minutes time.... 

Read other answers
RELEVANCY SCORE 63.6

Hello there!

I've been having problems with blue screens for a good time with my Desktop and it seems to happen more when the computer is idle. For example: I've been using my notebook a lot and had left the Desktop without use for days, now when I try to use it gets rebooted when I first turn the PC on. Then if I do not use it for some minutes it reboots again.

Thanks for the help in advance!

A:Problems with Event ID 1001 and 6008

Most of the BSOD dumps are blaming Avast.

Code:
BugCheck 1A, {8885, fffffa800522ff00, fffffa800522fea0, 605}

*** WARNING: Unable to verify timestamp for aswSnx.sys
*** ERROR: Module load completed but symbols could not be loaded for aswSnx.sys
Probably caused by : aswSnx.sys ( aswSnx+26923 )

Followup: MachineOwner
---------
Uninstall Avast using Avast Uninstall Utility. Use Microsoft Security Essentials as your antivirus with windows inbuilt firewall, and free MBAM as the on demand scanner.

Report us for any further BSOD after doing it.

Read other 2 answers
RELEVANCY SCORE 63.6

Below is the information from the event log, powershell ISE x86 and x64 bit versions crashe during application launch. Computer is Win 7 with WMF 5.1 and .net 4.7 installed... Any ideas why it is crashing?

Fault bucket , type 0
Event Name: PowerShell
Response: Not available
Cab Id: 0
Problem signature:
P1: powershell_ise.exe
P2: 10.0.14409.1005
P3: System.IO.FileFormatException
P4: System.Reflection.TargetInvocation
P5: indows.PowerShell.GuiExe.Internal.GPowerShell.Main
P6: System.RuntimeMethodHandle.InvokeMethod
P7: unknown
P8:
P9:
P10:
Attached files:
These files may be available here:

Analysis symbol:
Rechecking for solution: 0
Report Id: b24355d1-008c-11e8-bfdc-00248cfc82ea
Report Status: 0

Read other answers
RELEVANCY SCORE 63.6

i have previously added more ram since i thought the DIMM_D1 and DIMM_D2 didn't work. i asked the retailer where i bought the motherboard if they did refurbishment on the board and i looked on ebay for someone with a new motherboard. i figured if this is the last i'll see of this card i'm gonna atleast try to see if the dimm stick work.

i added 1 ram stick in DIMM_D2 and booted up and saw that memory had increased then i added the 2nd and saw that it increased again.

this is probably not serious since it has been working now for over 2 weeks and no problem at all. i was playing some minecraft and was at the movies while the bsod happened so i went into the event logs for system and found event ID 1001 (bugcheck).

i recently (ca. for over 2 weeks ago) de-dusted my computer and added new thermal paste for the cpu. and by this i think i haven't cleaned the under side of the cpu all too well since i think either it was still filthy cause the DIMM slots D1 and D2 didnt work since they work fine now.

although i still want to do a memtest to be sure everything is ok since after the bsod i started minecraft again. usually i have 150+ fps but after the bsod i have around 50ish fps.. which is kinda slow when i'm haulin 219 mods :P

i have included the bsod zip file as in the instruction for posting in this bsod forum.

thx

A:BSOD with bugcheck event-ID 1001

i restarted the computer yesterday after my first post. and everything was back to normal. minecraft pumping full fps again.

Read other 4 answers
RELEVANCY SCORE 63.6

Hello,
I am trying to setup a new desktop and encountered the BSOD a few times.  Here are the details from Event Viewer
The computer has rebooted from a bugcheck.  The bugcheck was: 0x00000001 (0x000000007764bdaa, 0x0000000000000000, 0x000000000000ffff, 0xfffff88009e12b60). A dump was saved in: C:\Windows\MEMORY.DMP. Report Id: 121316-29047-01.

I tried installing Windows Debugging Tools for Windows 7 but wasn't sure how to analyze the memory.dmp file.  I also tried installing Debug Diagnostic Tool v2 Update 2 but due to permissions issues I was not able to open the memory.dmp file

I think it may be a driver issue?  I tried installing my graphics driver and usb 3.0 drivers manually from dell.  I am not able to reproduce the BSOD.  I tried running Driver Verifier to reproduce it but the computer would not get past the
windows splash screen.  (I had to start in safe mode to reset Driver Verifier)

Below is a link to download my memory.dmp file, any suggestions or advice on what I can try next will be greatly appreciated.  Thank you

https://1drv.ms/u/s!Agygd0aW96Pia2j06MhtPj_DuiI

Read other answers
RELEVANCY SCORE 63.6

I have recently upgraded my computer with a new video card and audio card and ram. I have been getting intermittent BSOD and looking at the event log and using bluescreen view, the event ID is 1001. The drivers for the video and audio cards are all up to date. The ram is rated at 800 but my mother board ram sockets are 677/533 compatible. I am not sure if that might be the problem. I have attached the results of the blue screen view. Any help would be appreciated in deciphering what it all means and where my problem may potentially be.
My computer specs: XP SP 3, ATI HD 5850; Creative X-Fi Xtreme audio; 4 gig ram, amd Ms-7336 MoBo.

==================================================
Dump File : Mini110710-02.dmp
Crash Time : 11/7/2010 5:34:37 PM
Bug Check String : PAGE_FAULT_IN_NONPAGED_AREA
Bug Check Code : 0x10000050
Parameter 1 : 0xffffff60
Parameter 2 : 0x00000000
Parameter 3 : 0x80526673
Parameter 4 : 0x00000000
Caused By Driver : ntoskrnl.exe
Caused By Address : ntoskrnl.exe+4f673
File Description : NT Kernel & System
Product Name : Microsoft® Windows® Operating System
Company : Microsoft Corporation
File Version : 5.1.2600.5973 (xpsp_sp3_gdr.100427-1636)
Processor : 32-bit
Computer Name :
Full Path : C:\WINDOWS\Minidump\Mini110710-02.dmp
Processors Count : 2
Major Version : 15
Minor Version : 2600
=================================================... Read more

A:Intermittent BSOD event id 1001

Not enough information in what you gave ffrom the minidumps. So...

How to find and post your Minidump Files:

My Computer > C Drive > Windows Folder > Minidump Folder > Minidump Files.

It is these files that we need (not the folder). Attach to your next post the five most recent dumps. Notice the Manage Attachments button at the bottom when you go to post the next time. You can Zip up to five files per Zip; if you only have one or two you don?t need to zip them, just attach as is. Please do us a favor and don?t Zip each one individually.


How long have you been running your system with this memory?
 

Read other 3 answers
RELEVANCY SCORE 63.6

I have just done a fresh install from a beta win 7 to retail win 7 and i was downloading AIM and installing Ventrilo, i had a blue screen and a crash because of a critical error, Kernel-Power, Event-ID: 41. Im not sure what caused this, does anyone have an idea?

i have overclocked the i7 920, to 3.4 ghz, i have crossfire 4890 toxic's, 3x 500gb HD's in a stripe raid, 12 gb ram.

i was also having this same error in the beta, and it seems this error has not been fixed, at least for me. this is frustrating cause i cant use my computer to its full potential, any help would be greatly appreciated.

Also, I have been doing a memtest on my 12GB of ram, its gone through 14 passes, over 25 hours, with 0 errors.
the most recent error that was logged was:
The computer has rebooted from a bugcheck. The bugcheck was: 0x0000001e (0x0000000000000000, 0x0000000000000000, 0x0000000000000000, 0x0000000000000000). A dump was saved in: C:\Windows\MEMORY.DMP. Report Id: 122809-32421-01.

A:Event ID 1001: crash when i do too many things at once

any ideas?

Read other 7 answers
RELEVANCY SCORE 63.6

I have recently upgraded my computer with a new video card and audio card and ram. I have been getting intermittent BSOD and looking at the event log and using bluescreen view, the event ID is 1001. The drivers for the video and audio cards are all up to date. The ram is rated at 800 but my mother board ram sockets are 677/533 compatible. I am not sure if that might be the problem. I have attached the results of the blue screen view. Any help would be appreciated in deciphering what it all means and where my problem may potentially be.
My computer specs: XP SP 3, ATI HD 5850; Creative X-Fi Xtreme audio; 4 gig ram, amd Ms-7336 MoBo.
==================================================
Dump File : Mini110710-02.dmp
Crash Time : 11/7/2010 5:34:37 PM
Bug Check String : PAGE_FAULT_IN_NONPAGED_AREA
Bug Check Code : 0x10000050
Parameter 1 : 0xffffff60
Parameter 2 : 0x00000000
Parameter 3 : 0x80526673
Parameter 4 : 0x00000000
Caused By Driver : ntoskrnl.exe
Caused By Address : ntoskrnl.exe+4f673
File Description : NT Kernel & System
Product Name : Microsoft? Windows? Operating System
Company : Microsoft Corporation
File Version : 5.1.2600.5973 (xpsp_sp3_gdr.100427-1636)
Processor : 32-bit
Computer Name :
Full Path : C:\WINDOWS\Minidump\Mini110710-02.dmp
Processors Count : 2
Major Version : 15
Minor Version : 2600
==================================================

=======... Read more

A:intermittent BSOD event id 1001

Judging form the variety of files involved and from types of errors, possibly RAM issue (video card RAM included).
To eliminate one possible culprit quickly, remove video card, switch to on-board video for a day, or so, and see if BSODs are still there.

Read other 1 answers
RELEVANCY SCORE 62.8

Hello,

I have a new problem. I have a workstation that I just setup and the user is reporting BSODs on the system randomly. I've done all the standards stuff:

- Updated to the newest drivers from the vendor's web site
- Removed and reinstalled anti-virus
- Run chkdsk on the system volume
- Ran memtest86
- Looked into the bugchecks that came up. They are all event id 1001, but the bug check seems to change almost every time. I've noted bugchecks 3b, 0a, 7f, c4, 24, 101, 1a, 1e, 7e, and 4e. I didn't see anything promising, but I'm not exactly sure what to look for.

System is:

-Windows 7 pro 64-bit
-OEM install
-Compaq 100B SFF PC (Adina)
-AMD E-350 Processor @ 1.60Ghz
-4GB RAM
-While it's an older system, we bought it new recently from tigerdirect. Guessing it was overstock. It's perfect for our simple needs on this workstation as far as power goes. Just need to resolve the BSOD issue. BTW, the other unit that is exactly the same does not have any problems.

I have an exact match to this system, so I'm going to swap the hard disks between the functioning system and the one with BSOD problems. Once I note where the BSOD ends up, I'll have a better idea whether it's h/w or s/w. I'll post the information, but it is doing a BSOD every couple of days, so it may be a bit.

If you see anything that gives me a clue, please let me know. Also, please include what you saw that pointed to the conclusion as I'm interested in learning how to better troubleshoot these problems mysel... Read more

A:BSOD randomly event id 1001 on new machine

Welcome
You have had many BSODS with various causes. It appears that the problem may be due to hardware
Initial Hardware Diagnostics
There are, also, indications that the problem is due to your graphics driver, update driver.

Read other 3 answers
RELEVANCY SCORE 62.8

Windows 7
-x64
Windows 7 Ultimate
Full Retail
System Hardware is all new
First Install of the OS

1 x LG 22X DVD Burner - Bulk Black SATA Model GH22LS50 LightScribe Support - OEM
1 x SAMSUNG EcoGreen F2 HD103SI 1TB 5400 RPM SATA 3.0Gb/s 3.5" Internal Hard Drive -Bare Drive
1 x OCZ Signature 4GB (2 x 2GB) 240-Pin DDR3 SDRAM DDR3 1333 (PC3 10666) Desktop Memory Model OCZ3SR1333LV4GK
1 x OCZ Fatal1ty OCZ550FTY 550W ATX12V v2.2 / EPS12V SLI Ready 80 PLUS Certified Modular Active PFC Power Supply
1 x Intel Core i3-540 Clarkdale 3.06GHz LGA 1156 73W Dual-Core Desktop Processor BX80616I3540
1 x GIGABYTE GA-H55N-USB3 LGA 1156 Intel H55 HDMI USB 3.0 Mini ITX Intel Motherboard

The computer has rebooted from a bugcheck. The bugcheck was: 0x0000001a (0x0000000000000031, 0xfffffa8003a2f160, 0xfffff8800710e000, 0xfffff8a004a9b4f9). A dump was saved in: C:\Windows\MEMORY.DMP. Report Id: 112910-28984-01.

I've been dealing with this issue for several days on my own and decided to feed my information to a forum for help.

The system would randomly stall, reboot, or BSOD. I followed the suggestion of previous forums in which a similar problem was submitted. I updated all the drivers including but not limited to network, video, audio, and chipset directly from the manufacturer website as opposed to the install CD that came with the hardware. The issue seemed to be gone after two days of trying to reproduce the error by running burn tests, playing games, and watching streaming videos. ... Read more

A:BSOD Event 1001 Source Bug Check

Start troubleshooting your problem by removing Norton Symantec Antivirus and replace it with MSE.
You may go back to Norton after your Windows have stabled.
http://www.microsoft.com/security_essentials/

Then 3 dmp point to NTFS_FILE_SYSTEM (24) so I would recommend you to diagnose your hardrive.
1] Right click Command Prompt → run as admin → chkdsk /f /r
2] Use manufacture hardrive diagnostic tools → Hard Drive Diagnostics Tools and Utilities (Storage) - TACKtech Corp.

Another dmp point to BAD_SYSTEM_CONFIG_INFO (74).
It indicates OS corruption, then you must perform system file checker:
Right click Command Prompt → run as admin → sfc /scannow

Update this driver:
teamviewervpn.sys Thu Dec 13 01:22:09 2007 → TeamViewerVPN Network Adapter

And turn on your Windows Update.

Read other 3 answers
RELEVANCY SCORE 62.8

Okay, I have Windows 7 64bit. I'm trying to install a somewhat-older-but-should-work-game (Knights of the Old Republic 2), as well as some other older games (Star Wars Galaxies.) I keep getting a PCA2 Event 1001 error in my system log.

Now, PCA2 errors are Program Compatibility errors. The problem is, I've marked the executable as "run in Windows XP SP2 mode" and "Run as administrator." This should be enough to fix it; it certainly works for other people. The weird thing is, I've reinstalled Windows recently (had some harddrive problems) and I still get that error! It's driving me up the wall.

Does anyone know a fix for this kind of thing? I have tried running in compatibility mode and disabling DEP/ALSR/etc on the executable. I'm kind of out of ideas.

Thanks!
 

Read other answers
RELEVANCY SCORE 62.8

Every time I try restar my come I get blue screen, cant even bot in safe mode because it give me blue screen :DRIVER_POWER_STATE_FAILURE even when i say win 10 to restar to allow safe mode.
upgraded to win 10 from win 7, worked fine for a day.
only getting blue screen when I try to restart.


The computer has rebooted from a bugcheck. The bugcheck was: 0x0000009f (0x0000000000000004, 0x000000000000012c, 0xffffe00192e0a840, 0xffffd001a5d3f9b0). A dump was saved in: C:\WINDOWS\MEMORY.DMP. Report Id: 102815-46109-01.

there is no C:\WINDOWS\MEMORY.DMP in my drive :(

-
<Eventxmlns="http://schemas.microsoft.com/win/2004/08/events/event">


-
<System>


 
<Provider
Name="Microsoft-Windows-WER-SystemErrorReporting"Guid="{ABCE23E7-DE45-4366-8631-84FA6C525952}"EventSourceName="BugCheck"/>



 
<EventIDQualifiers="16384">1001</EventID>



 
<Version>0</Version>



 
<Level>2</Level>



 
<Task>0</Task>



 
<Opcode>0</Opcode>



 
<Keywords>0x80000000000000</Keywords>



 
<TimeCreated
SystemTime="2015-10-28T07:01:02.000000000Z"/>



 
<EventRecordID>4828</EventRecordID>



 
<Correlation
/>


 
<Execution
ProcessID="0"ThreadID="0"/>



 
<Channel>... Read more

Read other answers
RELEVANCY SCORE 62.8

Hi as I mentioned in the title my PC restarts randomly, usually it's infrequent, but today it restarted twice when I clicked Delete an email. This is what is showing in Event VIewer

The computer has rebooted from a bugcheck. The bugcheck was: 0x1000008e (0xc0000005, 0xbd0d20a2, 0xb1720304, 0x00000000). A dump was saved in: C:\WINDOWS\Minidump\Mini092211-01.dmp.

CPU: Intel P4 3.0Ghz
Motherboard: Asus P5GD1 - UAYO
Ram Speed, size and #sticks: 4 Kingston DDR Ram 3200 512MB each
GPU: Nvidia Geforce 7800 GT
PSU (do not leave this out): PC Power and Cooling 700 Watts
OS: Windows XP SP3

Hopefully someone knows exactly what is the problem from those encrypted bugcheck errors.
 

A:Random PC restarts bugcheck event ID 1001

Your error code is 0x8E and these are almost always caused by hardware (and a good indicator of bad RAM) but sometimes they can be due to faulty drivers.

In your case the Nvidia driver nv4_disp.dll was specifically cited as the cause of your crash.

I suggest doing the following...

1. Go to our Download section and click on Utilities and then download Driver Sweeper 3.1 to your desktop screen and install.

2. Download the latest diver(s) for your video card but don't install them.

3. Uninstall your video card drivers and reboot your PC into Safe Mode. Run Driver Sweeper and remove ONLY the video card drivers. I had someone use it on their chipset drivers! If it doesn't find any video card drivers that is quite okay; just leave all other drivers alone.

4. Reboot and install new video card drivers.
 

Read other 4 answers
RELEVANCY SCORE 62.8

Hi , i am running a windows server 2k3 with sp2 and server is getting rebooted with event id 1001 :The computer has rebooted from a bugcheck. The bugcheck was: 0x1000008e (0x80000003, 0xe0872e04, 0xf187f9c4, 0x00000000). A dump was saved in: C:\WINDOWS\Minidump\Mini020808-03.dmp.

and also i am getting event id 1003 : Error code 1000008e, parameter1 80000003, parameter2 e0872e04, parameter3 f1aff9c4, parameter4 00000000.

in the logs may this also be related to same issue.
Could anyone help me figuring out the cause of this. whether it is due to any driver or hardware failure. I am also attaching a dump files along with the thread.
Pls help me with the resolution asap. thanks
 

A:Event ID 1001: server rebooting from bugcheck

Pls reply asap i need help urgently thanks

I need to get it resolve very soon . pls help me
 

Read other 5 answers
RELEVANCY SCORE 62.8

Hi, guys I've recently gotten some random BSOD.. out of the blue (lol ) these past few days. Built my rig about 2-3 weeks ago and ran fine now its bug after another. These BSOD are the worst though it's happenning frequently and i have no idea why. After a few restarts it will be stable for the mean time such as right now, but the BSOD will strike again when im off gaurd.

EDIT 1: i've unlocked my cores to run quad core. 4th core was unstable, disabled that. tried 3 cores was stable on prime 95. Went and defaulted BIOS running dual core everything stock no BSOD yet. Just wanted to mention that if it related to the crashings.
EDIT 2: Nope just BSOD again... Checked Event Viewer and this was logged multiple timeswithin the 2 minutes of the BSOD.

(x) = Number of times logged in 1-2minute range.

(18)Event ID 7001:
The Network List Service service depends on the Network Location Awareness service which failed to start because of the following error:
The dependency service or group failed to start.
- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Service Control Manager" Guid="{555908d1-a6d7-4695-8e1e-26931d2012f4}" EventSourceName="Service Control Manager" />

<EventID Qualifiers="49152">7001</EventID>

<Version>0</Version>

<Level>2</Level>

<Task>0</Task>

<Opcode>0</Opcode>

<Keyw... Read more

A:Recent random BSOD event ID 1001

You have some really out of date driver:

Code:
fffff880`06d6a000 fffff880`06d70000 RTCore64 RTCore64.sys Wed May 25 13:39:12 2005 (42941D90) RivaTuner/EVGA Precision
fffff880`12b5f000 fffff880`12b73000 Rtnic64 Rtnic64.sys Mon Mar 31 12:39:38 2008 (47F0791A) Realtek Ethernet NIC driver
update them first because 2,3 old driver are notorious cause for BSOD in window7


Code:
BugCheck A, {fffffa7ff3ffffe0, 2, 1, fffff80002caae7e}

Probably caused by : memory_corruption ( nt!MiRemoveAnyPage+13e )

Followup: MachineOwner
---------
BugCheck A, {fffffa7ff3ffffe0, 2, 1, fffff80002cce209}

Probably caused by : memory_corruption ( nt!MmZeroPageThread+3d4 )

Followup: MachineOwner
---------
Let us know if you need help

Tuan

Edit: Also please run system file check as well:
SFC /SCANNOW Command - System File Checker

Read other 9 answers
RELEVANCY SCORE 62.8

Source: Save Dump

The computer has rebooted from a bugcheck. The bugcheck was:
0x0000001e (0xc0000005, 0xbf9e2cf1, 0x00000000, 0x00000076). A
dump was saved in: C:\WINDOWS\MEMORY.DMP.

I would like to know what caused this error. Any help to fix it would be appreciated.

Read other answers
RELEVANCY SCORE 62

Probably this error is pretty much a non-issue and I haven't a clue if the affected W7P machine, even runs Windows Server 2008 R2 (or any windows server for that matter).

Is this 'server' thing, software that is by default installed (and I'm guessing it's only used when the machine networks with another machine, home/work groups)?

As for if and what version the W7P machine even 'runs', the only loosely provided instructions I've found (by clicking the event log's link to information about the error), results in a webpage...

Event ID 1001

..which sort of implies to me that the W7P machine might be running 'Windows Server 2008 R2', if only because the event log error report's link led me to that web page's article, ie; the article says it applies to Windows Server 2008 R2.

I tried following the article's mentions of checking to see what version of 'server' that is installed, but step 2 seems too poorly written for me to follow what's actually be said...

Determine if there is a network connectivity problem
To determine if there is a network connectivity problem between the‚ DHCP‚ server and domain controller:
At the DHCP server, click Start, click Run, type cmd, and then click OK.
At the command prompt, type ping server_FQDN, where server_FQDN is the fully qualified domain name (FQDN) of the domain controller (for example, server1.contoso.com), and then press ENTER.
What's unclear to me is where it alludes to...

"..where se... Read more

A:Event ID 1001 — DHCP Client Lease Validity

I have been looking at the same page as you, and I too am just as confused about how to follow the instructions. It would be good to fix this problem, but how is it done?

My event viewer shows this error.
Event 1001, Dhcp-Client
Dave

Read other 2 answers
RELEVANCY SCORE 62

Chkdsk runs occasionally everytime my OS boots. I didn't schedule it that way though. After the run it will always found no errors don't really now why the procedure keeps repeating even though in the end it will found no errors. I've read a lot of forums about this issue. Also tried to isolate the problem by doing all the chkdsk command but this doesn't solve the problem. I want to know why the procedure keeps repeating with my hard disk having no errors or any issues, it is properly configured and formatted. Also from the forums it says Avira antvr is causing the problems. I happen to also have Avira and also checked the forums regarding this issue. The hot fix from Avira didn't solve the issue and they said it a bug from Microsoft and they are still (not sure if Microsoft has already found a solution, since the forum was from last year) working for a fix along with Microsoft. Most of the of the people in the forums stated this error as event id: 55 and/or 5508. As for mine the event id is 1001 and the source is Wininit. This is the event detail:

Checking file system on C:
The type of the file system is NTFS.
One of your disks needs to be checked for consistency. You
may cancel the disk check, but it is strongly recommended
that you continue.
Windows will now check the disk.

CHKDSK is verifying files (stage 1 of 3)...
220672 file records processed. File verification completed.
228 large file records p... Read more

A:CHKDSK runs randomly during boot of my OS (Event ID: 1001)

See if this helps
Check Disk - Reset

Read other 4 answers
RELEVANCY SCORE 62

I posted this on Sevenforums because i totally forgot I was using 10 but here's kind of a repost haha.

I was in the middle of using Cakewalk Sonar Artist and the computer randomly BSOD. It a pretty memory and CPU heavy program but I'm curious what happened.

I've had a few crashes as of lately. One I believe to be a bad GPU but now I saw ID: 18 which says something about my CPU.

Any help would be great.

Edit: It's been crashing a lot lately with different kinds of freezing, lock ups, and BSOD. Everytime it was when I used Sonar Artist. I can play new games without issues but once I start using that application it crashes after about 15-20 minutes.

The uploaded attachment is current to today.

A:BSOD while using Sonar Artist. Event Viewer 1001 and 18

The errors are 0x124 WHEA_UNCORRECTABLE_ERROR (Windows Hardware Error Architecture)
This means that there are problems with your hardware, but this error is also caused by overclocking, faulty drivers or BIOS problems.


STOP 0x124 Troubleshooting

Read carefully before proceeding.
   Warning
If you're overclocking your system, revert back to stock clocks now.


   Note
Test the system once the overclock is removed before continuing with the steps outlined below.

Part One: CPU Stress Test
Part Two: MemTest86+ RAM Diagnostic
Part Three: Hard Drive Diagnostics
Part Four: GPU Stress Test



ONE

 CPU TEST

Run Prime95 and/or IntelBurnTest to stress test your CPU. Prime95 - Stress Test Your CPU - Windows 10 Forums & CPU - Stress Test Using IntelBurnTest - Windows 7 Help Forums

   Warning
Your CPU temperatures will rise quickly while under this stress test. Keep a keen eye on them and abort the test if overheating occurs.



TWO

 RAM TEST

Run MemTest86+ to analyse your RAM. MemTest86+ - Test RAM - Windows 10 Forums


   Note


MemTest86+ needs to be run for at least 8 passes for conclusive results. Set it running before you go to bed and leave it overnight. We're looking forzero errors here. Even a single error will indicate RAM failure.



THREE

 HDD TEST

Run SeaTools to check the integrity of your HDD. SeaTools for DOS and Windows - How to Use -... Read more

Read other 0 answers
RELEVANCY SCORE 62

Hey guys, first time poster

So I'm getting random BSODs for no apparent reason. I haven't updated anything recently myself except Nvidia Experience software; Windows updates itself. Looking in event viewer I get a Bugcheck error:

The computer has rebooted from a bugcheck. The bugcheck was: 0x0000001a (0x0000000000041790, 0xfffffa800367ad60, 0x000000000000ffff, 0x0000000000000000).

Details:

+ System

- Provider

[ Name] Microsoft-Windows-WER-SystemErrorReporting
[ Guid] {ABCE23E7-DE45-4366-8631-84FA6C525952}
[ EventSourceName] BugCheck

- EventID 1001

[ Qualifiers] 16384

Version 0

Level 2

Task 0

Opcode 0

Keywords 0x80000000000000

- TimeCreated

[ SystemTime] 2014-05-12T22:09:31.000000000Z

EventRecordID 308466

Correlation

- Execution

[ ProcessID] 0
[ ThreadID] 0

Channel System

Computer Rob-PC

Security


- EventData

param1 0x0000001a (0x0000000000041790, 0xfffffa800367ad60, 0x000000000000ffff, 0x0000000000000000)
param2 C:\Windows\MEMORY.DMP
param3 051214-34413-01

Dumpfile attached. Any ideas?

Thanks in advance!

A:Random BSODs (Bugcheck 0x0000001a Event ID 1001)

No one?

Read other 8 answers
RELEVANCY SCORE 62

I recently built a new pc, installed windows 7 64bit, installed mobo drivers, installed video card drivers, then got all of windows updates. I got a BSOD randomly and it rebooted to windows fine. The next day it happened again about 2 hours after boot. The second time I saw it said: Page fault in nonpaged area, but then it flashed away and rebooted before I could read more. Then last night I fell asleep downloading something and woke up to it saying it recovered from an unexpected shutdown.

Not sure if this is related but Applications are crashing as well. I get error messages such as:
Catalyst Control Center: Host application has stopped working.
McAfee service host crash
Windows Explorer has stopped working
Also Chrome crashed very frequently when I tried to upload multiple photos.

Specs:
Cpu: AMD FX6300 6core
Motherboard: Gigabyte 990fxa-ud3 revision 3.0
Ram: Patriot Viper 2x4gb 1866mhz
Gpu: Sapphire 7870xt

Sorry for the long post, just trying to get as much info that is needed.

I have attached the .zip file from the Sf diagnostic tool, hope I did it right...
Thank you in advance for any help, it is MUCH appreciated!

A:Random BSOD New build 0x800... event id 1001

Code:
BugCheck 109, {a3a039d89ac8d7b2, b3b7465eed45a718, fffff800037567c1, 1}

Probably caused by : ntkrnlmp.exe ( nt!CmpParseKey+721 )

Code:
Usual causes: Device driver, Breakpoint set with no debugger attached, Hardware (Memory in particular)
The bugcheck indicates that the Windows kernel has detected that some form of critical data corruption has occurred, this could be due to failing RAM whereby the kernel objects are being held, causing the held data to become corrupted. Poorly written drivers can cause this problems by directly modifying kernel code.

Remove:


Code:
Start Menu\Programs\McAfee
Start Menu\Programs\McAfee Online Backup
McAfee is known to cause BSODs with Windows 7, and uses many poorly written drivers which tend to cause memory access violations, the best method is remove all McAfee products completely using the McAfee Removal Tool, and then install these free and proven alternatives which work best with Windows 7.

Install and perform full scans with:Malwarebytes : Free anti-malware download
Microsoft Security Essentials | Protect against viruses, spyware, and other malware


   Information
Remember to install the free version of Malwarebytes not the free trail; untick the free trial box during installation. MSE is the most lightweight and compatible with the Windows 7 operating system

You can also view this thread for a complete free and lightweight security protection combination:Good and Free system security combina... Read more

Read other 9 answers
RELEVANCY SCORE 62

I was in the middle of using Cakewalk Sonar Artist and the computer randomly BSOD. It a pretty memory and CPU heavy program but I'm curious what happened.

I've had a few crashes as of lately. One I believe to be a bad GPU but now I saw ID: 18 which says something about my CPU.

Any help would be great.

A:BSOD while using Sonar Artist. Event Viewer 1001 and 18

I just opened it back up to recreate the BSOD and it did. I was just fixing a few things with a song I'm writing and then it BSOD. I attached the minidump.

Read other 1 answers
RELEVANCY SCORE 62

Hi everyone

Nice to have a community like this, i have found many solutions on this site

For once my own machine is having some issues. Once a week i am getting the dreaded blue screen. Could someone please interpret the dump file for me so i can get this sorted out

Would really appreciate any assistance

A:BSOD: At specific times of the week Event ID: 1001

Hi Metalmilitia welcome to SF

Please update your M-Audio (MAudio Fast Track Pro) software\drivers.
M-AUDIO - Drivers and Software Search

------------------
Finish with the above steps and post back with any results.

Read other 3 answers
RELEVANCY SCORE 61.6

Hi there,

I've been getting some rather random crashes, after trying all the usual troubleshooting I thought I had solved it by replacing the GPU but it has just reared its ugly head again tonight. The screen goes black randomly during gaming, no particular title or anything meaning I have to reboot. The event log mentioned this after I rebooted:






The computer has rebooted from a bugcheck. The bugcheck was: 0x00000133 (0x0000000000000000, 0x0000000000000501, 0x0000000000000500, 0x0000000000000000). A dump was saved in: C:\Windows\MEMORY.DMP. Report Id: 022615-4796-01.



As per the instructions in the sticky I've attached the DM Log collector Tool zip file.

Hope you can help.

Thanks,

Mark

A:Black Screen Crashes while Gaming: Event Log 1001 BugCheck

Hi Mark & Welcome to the forums ^_^,

I have analysed your dump files and below has been provided an analysis of the same for informative purposes :-
DPC_WATCHDOG_VIOLATION (133)
The DPC watchdog detected a prolonged run time at an IRQL of DISPATCH_LEVEL or above.
Arguments:
Arg1: 0000000000000000, A single DPC or ISR exceeded its time allotment. The offending
component can usually be identified with a stack trace.
Arg2: 0000000000000501, The DPC time count (in ticks).
Arg3: 0000000000000500, The DPC time allotment (in ticks).
Arg4: 0000000000000000

So, it seems that a driver exceeded the time limit allotted to it. Let's check the stack and see if we could find something.

Code:
0: kd> knL
# Child-SP RetAddr Call Site
00 fffff800`4da6ac88 fffff800`4bff043a nt!KeBugCheckEx
01 fffff800`4da6ac90 fffff800`4bed09b7 nt! ?? ::FNODOBFM::`string'+0x1258a
02 fffff800`4da6ad20 fffff800`4be1567f nt!KeClockInterruptNotify+0x787
03 fffff800`4da6af40 fffff800`4bf62eb3 hal!HalpTimerClockInterrupt+0x4f
04 fffff800`4da6af70 fffff800`4bfcee2a nt!KiCallInterruptServiceRoutine+0xa3
05 fffff800`4da6afb0 fffff800`4bfcf20f nt!KiInterruptSubDispatchNoLockNoEtw+0xea
06 fffff800`4da5c710 fffff800`4bf3709b nt!KiInterruptDispatchLBControl+0x11f
07 fffff800`4da5c8a0 fffff800`4bf37062 nt!KxWaitForSpinLockAndAcquire+0x1f
08 fffff800`4da5c8d0 fffff800`22dd2100 nt!KeAcquireSpinLockRaiseToDpc+0x32
09 fffff800`4da5c900 00000000`00000000 nvlddmkm+0xda100


So, it was the NVIDI... Read more

Read other 9 answers