Over 1 million tech questions and answers.

don't know how to set up new wifi router... set up issues

Q: don't know how to set up new wifi router... set up issues

i have new netgear router wifi and don't know how to set up with my lenovo/windows 10 laptop.

Read other answers
RELEVANCY SCORE 200
Preferred Solution: don't know how to set up new wifi router... set up issues

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

RELEVANCY SCORE 62

Hello, I am a bit of a hard time with 2 routers on one network and unfortunately as things stand now they both have to be there. So I just got ADSL and the only modem option available to me was one with a 4-port wired router, I hooked that up into my existing network of about 9 computers (5 laptops and 4 desktops) which is connected by another 4-port WiFi router.

I started out with my only goal of hooking 3 of these computers to the internet after I got the DSL by some MAC filtering configured in the WiFi router. But, having the DSL modem/router has created another issue. I am using 2 separate IP gateways for both the routers which are in the same subset, I can connect to both of them from all my machines. The problem is I don't have any control over which computer connects to what router. I am trying to avoid setting each PC up with a static IP that needs internet access.

Here is my setup in more detail. My ADSL router is 192.168.1.254 and my WiFi router is 192.168.1.111 and both have the subnet 255.255.255.0. My ADSL connection has dynamic IP and the modem/router is connected into a LAN port on the WiFi router. I have tried disabling DHCP on the modem/router and changed my WiFi router IP to that of the modem (which was counter productive) to no avail. Someone mentioned MAC address cloning but I am not sure if it will work in this setup. Since I configured this I am seeing quite a few IP conflicts, which are probably my fault as I didn't check when I was setting... Read more

A:Wifi Router + ADSL Router = Issues with dynamic IP

Read other 6 answers
RELEVANCY SCORE 58

I am confused and have no idea where to start... I apologise in advance for the wall of text.

Recently I have been experiencing odd issues with my WiFi router ( at least I think its the router) ZyXel Keenetic Giga II. The most annoying of which is the periodic inability to load random webpages. For example, I might be able to load google but not any of the search results while at the same time being able to browse reddit on my phone or tablet. The pattern changed constantly and it doesn't seem to affect any particular web pages. Like I said - random. This happens once or twice a week and seems to be increasing in frequency. I have tried rebooting the router. Rolling back to factory settings, changing DNS. With no result. It only resolves itself when it "feels" like it and usually lasts from 5 min to several hours. It is also worth mentioning that I hardly ever use my laptop and most of the browsing and streaming is done using various mobile devices.

Any help in defeating my router would be greatly appreciated.
 

A:Strange issues with WiFi router

Describe "The most annoying of which is the periodic inability to load random webpages" in detail please - -
 

Read other 15 answers
RELEVANCY SCORE 58

In my house we have had various problems with our previous router.
It was always playing up, it wouldn't connect to websites it would randomly lose connection to the entire house occasionally.
Therefore we bought a new router which works perfectly through the Ethernet cables and on lan etc.
However there is a huge issue with the wifi, it will work for about 1-2 hours and then it will lose all connectivity on the wifi until you restart the router, which is an inconvenience to my brother who plays world of warcraft alot and always seems to be something going on. We have tried various channels through the router configuration, including 1 and 11 the latter of which it is currently set to. There is one other router in our area set to 7 so technically there should be little interference.
Any help would be appreciated. Thanks!

The make and model of the new router is...
Draytek Vigor 2600 G
 

A:Solved: Wifi issues with new router

Read other 16 answers
RELEVANCY SCORE 56

Hey everyone,
I'd really appreciate any help you guys can give on the issue...I'm at my wits end at this point...

So anyway, about a month ago my old 2wire modem pretty much kicked the bucket for good (after about 4 years of more or less dedicated service with the occasional hiccup here and there, I was kind of saddened yet relieved) and I was left without internet for a few days. I contacted my ISP with the issue, and after a bunch of failed restart attempts on their end (I told them the damn thing was dead already, but they were insistent on making sure I wasn't bs'ing them) they finally relented and decided to send me their new Pace 4111n router/modem.

A few days later, low and behold, I had a new Pace and guess what? IT HAD WIFI!!

The reason why this came as such an interesting surprise was because my old 2Wire that my ISP had originally provided us with was simply a modem with no router/wifi capabilities on it. In order to bypass the lack of Wifi, I had to purchase a Netgear N300 router and had it hooked up to the 2Wire for years with no connectivity issues.
Anyway, with the new Pace in hand, I put my old Netgear away and plugged the new baby in....and here is where things kinda went downhill....
Now...my old set up was kinda strange...I used to have the 2Wire modem hooked up to the Netgear router and in between had a Grandstream HT502 Voip phone adapter plugged in (we have the need in my household for long distance phone service, and in order to ... Read more

A:WiFi Connectivity Issues with Pace 4111n Modem/Router

Read other 16 answers
RELEVANCY SCORE 56

Hi All,
I received my brand new Kaby Lake powered Dell XPS 13 9360 a couple of weeks back and I have been suffering from wifi disconnect issues since then. The USB LAN connection works perfectly using the Dell USB C adapter.
I have tried all the standard troubleshooting steps:
1. BIOS and Killer 1535 Wireless Adapter Driver updated to latest version  (including uninstalling and reinstalling the wireless drivers)
2. Updated Windows 10 to the latest anniversary edition
3. Changed Power Saving settings on the Wireless Adapter using Powershell commands as there are no Power management options for the Killer Wireless adapter in Device Manager 
(Disable-NetAdapterPowerManagement -Name "Wi-Fi" -NoRestart)
After running the above command I get the status of the relevant power mgmt parameters as below (though not sure if its really effective)
DeviceSleepOnDisconnect : InactiveWakeOnMagicPacket : Disabled
 4. Installed the latest Intel PROSet/Wireless Software and Drivers for Windows 10
Even after running step 1 and then later step,2 the wifi connection used to disconnect after some time (especially when a large file was being downloaded or any high network usage activity). Running a speed test of my broadband connection is a sure way to disconnect from wifi. More importantly this disconnection used to crash the Access Point on my TP-Link WR841N router which caused all my other devices to lose network connection as well and required a Router restart.
... Read more

Read other answers
RELEVANCY SCORE 55.6

Hi:

Thanks for having me on your forum.

As the title of my post states, I'm having issues with my Windows 10 Wifi or lack thereof.

Let me clarify. I just got FIOS installed back in May 2016. Originally, it was supposed to be installed in March but then Verizon workers went on strike.

Anyway, before getting FIOS and the Quantum Modem/Router, I had DSL Linksy router. I attempted to access/utilize the wireless capabilities of the old DSL router and lo-and behold it worked. I was able to use the "Cast to" feature with the Samsung Smart TV. Everything was working great. Then I got the FIOS Quantum Modem/Router and now not only did the Wifi disappear from my Windows 10 "Settings" but the WLAN Network adapter is also missing from my "Device Manager". Basically I need to know if this is FIOS Modem/Router or something with my motherboard. I don't know if it's the motherboard but I'm not ruling the possibility out that it could be. I say this because there wasn't an issue with WLAN Adapter missing from the "Device Manager" before I got new so-called improved FIOS Quantum Modem/Router. Regardless of how things shake out I would appreciate any help that you can provide.

Thanks,

P.S. I might not get back to you quickly as sometimes when I get home from work the last thing I feel like doing to getting on the computer.

Read other answers
RELEVANCY SCORE 52.8

Hi,

I recently bought dlink D2750U WIFI ADSL modem/router, for my ADSL internet connection.

But I have now changed my ISP, who provide internet via cable(not telephone line). The ISP guy provides a cable modem(old modem) along with it.

I have connected my PC this way:
Cable modem -> Router -> PC through RJ45. I am able to access internet from my PC, but I am not able to get wifi working on the router. And I am logging onto internet through a dial up connection.
Questions:
1) Please help in configuring the router to get wifi working.
2) Also, my default gateway seems to be either 0.0.0.0 or blank. So, I am not able to login to the modem unless I remove the modem connection. Please let me know if I am doing anything wrong here.

Here are a few more details:
Output of ipconfig: http://pastebin.com/Zr9Eb7L7
 

A:Using dlink D2750U Wifi Modem/Router As a Wifi Router

Hey Narain. The D-Link unit you have appears to be a combo unit (modem and wireless router) since it connects straight to the RJ-11 phone line. This unit won't work with an ISP that provides service by way of coax cable. The D-Link will work if you want to use DSL, but you need a cable service compatible modem or combo modem/router if you use cable service.

ftp://support.dlink.co.in/broadband/DSL-2750U/manual/DSL-2750U_C1_Manual_IN_1.00.pdf
 

Read other 6 answers
RELEVANCY SCORE 48.4

I have a desktop that is able to have wifi it's a adapter dell 1450 UBS Wireless 802.11a/b/g it works so does the router which is a Cisco Linsky E 1000 it shows um that it works I'm getting packet but I just can't seem to connect I don't understand it says that I am connected but I cannot get on the internet what am I doing wrong please help my desktop is compaq hp with wireless capability help!
 

Read other answers
RELEVANCY SCORE 48

I am currently stationed in Germany, and live in a village that has horrible internet. I cannot stream netflix, hulu, and downloads take several hours.

Is there a way to combine the internet that my cell phone receives and the wifi router I have at home to increase speed?

I have the ability to create a wifi hotspot from my cell phone if this helps.

Just something I thought up in my head, and wanted to find out if it is possible. Thanks in advance.
 

A:Combining Wifi Hotspot and Router Wifi for faster internet

You can, try this http://www.octopusplus.com/download.jsp or http://www.connectify.me/
 

Read other 1 answers
RELEVANCY SCORE 48

My HP ZBook does not connect to my D-Link  Model DSL-2750U rooter even though my phone and other laptops can connect to internet.

Read other answers
RELEVANCY SCORE 48

I am looking to replace my tired Linksys WRT54G router that is about 10 years old. I love the router, and its even better with DD-WRT on it, but I'm starting to have troubles with the wifi dropping all the connects for a couple seconds when running all my wireless devices. I have 3 smart phones, 2 tablets, 1 Chromecast, a smart TV, and Roku + a laptop or 3 in my house right now, and it seems like its getting to be a bit much for it.
I have had to completely re-flash the firmware twice this year to get the wifi working again, so I'm thinking its time for replacement.
I have been thinking about just getting the new WRT54GL for $50, but I'm also thinking it might be a good idea to upgrade the wifi technology past wireless G .
I'm wondering if my Tablet (Nexu 9), and our smartphones (Razr HD Max) along with the Chromecast will take advantage of the new wireless standards and higher speeds or not? If they will can someone recomend a decent wireless router that takes DD-WRT nicely in the sub-$100 range? Thanks!
 

A:Looking for new Wifi Router - Will Tablet/Smartphone take advantage of new wifi Standards?

I been programming in Android/Linux since 2010 and there is code that supports VHT is Very High Throughput. Right now the standards are HT is High Throughput .

As for DD-WRT firmware is like your overclocking your router pushing it beyond the OEM limits. I use to use DD-WRT but had quit many years ago since the routers that used that firmware would fail too much.

So best to buy a better business type enterprise router wired then you can use WiFi router as AP or just get WiFi AP(access point). To me WiFi Router is also Wired Router, but to use just a wired router and use WiFi AP through a switch is better. If one or the other goes you can easy replace them. Where as if the WiFi Router fails you would need to replace it.

If you really want to use DD-WRT then Look at Buffalo WiFi Routers some come pre-installed with DD-WRT on them. Frankly you really don't need DD-WRT today because newer routers or WiFi routers are much better built and offer much more power NPU = network processor units and 128, 256, 512, 1GB of RAM some have Dual Cores.
 

Read other 9 answers
RELEVANCY SCORE 47.6

Wifi doesn't connect when i move away from wifi router. I have a wifi router installed in my drawing room where i get good browsing speed on phones and laptops. But the problem starts when i take my laptop from drawing room to my bedroom which is not more than 5 mtrs from router. Wifi signal drops to zero on laptop whereas it remains decent on phones. Earlier my laptop used to connect in bedroom as well..This is happening lately. Is there any solution?

Read other answers
RELEVANCY SCORE 47.6

Hi Could you please tell me if this is possible:
My computer is connected to a wireless network. Can I hook up my D-link (DIR-412) to my computer and use the internet from the computer to output another wireless area?

Thanks sounds complicated.
 

A:Connected to WIFI and want to extend wifi with another wireless router

Where you live is your setup like this?

#1
Internet
Modem
WiFi Router

or

#2
Internet
Modem with built-in WiFi Router

If you want extend the WiFi you would get WiFi Access Point. Or you can take a WiFi Router and disable NAT, SPI, DCHP, then you create a static IP address. 192.168.x.50
 

Read other 2 answers
RELEVANCY SCORE 47.6

my HP 15 116 laptop wifi cannot connect to wifi router modem AND it keeep on saying "cant connect to this network" whereas it  can work perfectly fine on smartphone wifi hotspot . please fix it ......... DONT MAKE ME REGRET ON BUYING HP LAPTOP ....

Read other answers
RELEVANCY SCORE 47.6

So I got a new router yesterday to replace the old one, and I've been working on it for a long time. But I can't seem to figure out why there isn't any internet connection. The new WiFi Router (D-Link DR-842) Shows it is connected to the internet (green light) but in the setup page, it says disconnected. Could the PPPoE details be causing this? As far as I know everything is correctly set up except for the internet part.
 

Read other answers
RELEVANCY SCORE 47.6

I have been trying for some time to accomplish the title result. I'm not techie enough to do it.

What I want is to be able to use a Tablet to read in the rear of my home (which is out of range for incoming wifi signal.)

If I can set up the computer to do this, I will cable connect to a router in that area.
I have two computers and could use either.

1.a PC running XP (should update to windows 8.1, but have never bothered to do that, since XP works just fine. (I had this computer sharing to the router, when I had DSL internet connection, using Windows wizard to set it up) Couldn't get it to work when I switched to WIFI internet access) I could switch to win 7 or 8.1 if that would help.

2. a Lap Top running WIN 8.1,

Any help is appreciated.

A:Internet access via WIFI and share WIFI via second router

Due to the age of XP this is not the best option for what you want to do

Either windows 7 or 8.1 have access to Internet connection sharing (ICS) built in

To use ICS you need at least two connections to the local LAN, these can be any mix of wifi or Ethernet.

As you have a laptop you likely already have a system to use for this

There is a tutorial explaining the basics ... and more on this site

Check it out and post back if you have any issues

Internet Connection Sharing - Create WiFi HotSpot

Read other 2 answers
RELEVANCY SCORE 47.2

i have posted this but no one has even viewed it as the title wasn't very good.

Anyway, i have 2 wifi routers, one in the lounge that is on internet, one in my room that is not.

i want them both to be able to supply internet.

the one in my room will just be used to ethernet internet into my PS3.

alternative is that i use the wifi on my laptop then ethernet my laptop to PS3, is this possible?
 

A:Wifi router to wifi router? so i can use PS3 via ethernet

Read other 16 answers
RELEVANCY SCORE 46.8

I just want to know if its possible to connect your wifi broadband to wifi router? and if it is, How?
 

A:HOw to Connect wifi broadband to Wifi Router

I may be misunderstanding you but if you're getting WiFi out of your broadband appliance already, you don't need a router. If you do want to use a WiFi router, you're not going to be using the WiFi signal from the broadband appliance.
Sent from my iPhone using Tapatalk
 

Read other 2 answers
RELEVANCY SCORE 46.8

Actually my wifi adapter can catch all other wifi signal except my wifi router.

A:my notebook wifi adapter don't get my wifi router

There are several resons.1. The wifi signal might be too weak at the point where the computer is.2. Other device radiation/signals might be blocking it.3. Your router signal might be hodden (check EWS of router).4. Signal broadcasting might have been turned off on router. Since other signals are found on the computer, there shouldnt be a issue with your couputer.

Read other 1 answers
RELEVANCY SCORE 46.8

I have a Netgear WGR614v9 router and was wondering if its possible to use this as a wireless adapter for my computer?? I think it might support the DDWRT open source firmware??? I am wanting to do this STRICTLY as a learning purpose.
 

A:Solved: use my wifi router as wifi adapteR??

Read other 8 answers
RELEVANCY SCORE 46.8

Hello guys, I'm new here, and I know that this sounds like a duplicate thread, but I couldn't find anything similar to this one.  I have said laptop with the Intel wireless card (7260) running Windows 10 and Ubuntu 16.04. I'm on the go quite often so I have connected to several wifi routers with no issues.  And there is my home. I am rarely here, but when I get here I can connect to my wifi router (2.4 GHz), but often experiencing unusually high pings (above 1000 ms). This happens on both OS-esI have the latest wireless driversIn Windows Device Manager I set everything I could to max the wifi performanceNo other device has this issue (two laptops, two smartphones, an USB wifi stick on my home network (not simultaneously of course))The environment should not be an issue. The router is 6-7 meters away, with two walls between the router and the laptop. I have an older Lenovo laptop next to this one (G580) and it has no issues at all. The laptop does not have this issue with other devicesThe issue is with the connection between the laptop and the router (I tried reaching the router's config site, same slowness)The network properties say that my connection link's speed is 27/27 MBPS, sometimes less, sometimes more, but I always have a strong signal There is only one other wifi router nearby and that's on a different channel.It is starting to get really annoying, so any help would be greatly appreciated.

Read other answers
RELEVANCY SCORE 46.4

Hi Guys,
This is Viral. I am using an Acer laptop model ASPIRE 4736 since the last five years. There haven't been much issues with it. except for the battery and thats it. But recently, since last two weeks I noticed that my Wifi would stop blinking after sometime after I start my laptop and then it wouldn't work even when I try to turn on and turn off the Wifi switch(it doesn't respond anything). I tried searching the net for this issue using my office laptop and found that a system restore would help to solve this issue. Since I remembered that I updated Java as well as there was this ad software which got installed and I had unistalled it. So I did a system restore and then when I opened the device manager, I am not able to see intel r wifi link 5100 driver on it. I tried restarting my laptop and did everything and couldn't find the driver(it was there before the system restore). But later on the same day, the driver got installed automatically and the WiFi started working but only for a couple of minutes after the restart and then it stopped. So  I did the system restore again to the date when everything was working perfectly and when i did that, again my intel r wifi link 5100 driver is not shown on the device manager(network adapters). I don't if it would automatically get installed or not but its sure that the WiFi issue still be there. So can you please help with this issue?
1. Help me get the intel r wifi link 5100 driver back
2. Help me the solve the WiFi issue... Read more

A:Issues with WiFi as intel r wifi link 5100 is not installed after d systm restor

Select Model, Select Operating System, Download your Drivers
 
There is also a hardware detection tool to assist you.
 
http://us.acer.com/ac/en/US/content/drivers
 
If the software is listed in add/remove programs; Uninstall it.
 
If the device is listed in device manager; uninstall it.

Read other 18 answers
RELEVANCY SCORE 46.4

Hi Guys,
This is Viral. I am using an Acer laptop model ASPIRE 4736 since the last five years. There haven't been much issues with it. except for the battery and thats it. But recently, since last two weeks I noticed that my Wifi would stop blinking after sometime after I start my laptop and then it wouldn't work even when I try to turn on and turn off the Wifi switch(it doesn't respond anything). I tried searching the net for this issue using my office laptop and found that a system restore would help to solve this issue. Since I remembered that I updated Java as well as there was this ad software which got installed and I had unistalled it. So I did a system restore and then when I opened the device manager, I am not able to see intel r wifi link 5100 driver on it. I tried restarting my laptop and did everything and couldn't find the driver(it was there before the system restore). But later on the same day, the driver got installed automatically and the WiFi started working but only for a couple of minutes after the restart and then it stopped. So  I did the system restore again to the date when everything was working perfectly and when i did that, again my intel r wifi link 5100 driver is not shown on the device manager(network adapters). I don't if it would automatically get installed or not but its sure that the WiFi issue still be there. So can you please help with this issue?
1. Help me get the intel r wifi link 5100 driver back
2. Help me the solve the WiFi issue... Read more

A:Issues with WiFi as intel r wifi link 5100 is not installed after d systm restor

Select Model, Select Operating System, Download your Drivers
 
There is also a hardware detection tool to assist you.
 
http://us.acer.com/ac/en/US/content/drivers
 
If the software is listed in add/remove programs; Uninstall it.
 
If the device is listed in device manager; uninstall it.

Read other 16 answers
RELEVANCY SCORE 46

Hello one and all,
I am sincerely hoping someone can assist with my little networking problem as i'm tearing my hair out now..

Here at work we have a Vigor Modem/Router hosting our connection to the world. It was originally on DHCP & the 4 computers & 2 printers found their own IP addresses without problem.

We added a Linksys router via ethernet (to a lan port not the wan) in another area of the yard. This was fine also on DHCP and connecting wirelessly from a laptop or mobile phone was a doddle.

Then our oh so wonderful IT geek decided to put the Vigor on a Static IP along with all the computers connected to it. This has some how cut off the wifi capability of the Linksys router now.

It is basically acting as a hub for two laptops and nothing else.

In simplistic terms with some detail what settings need changing on the Linksys if any?

The Vigors internal IP is 192.168.1.1
Linksys is 192.168.1.4
both on subnet 255.255.255.0

I have been advised to set the Linksys to a static IP on the Internet Connection option but what set of figures do i need for that??

Fingers crossed...

Stonkin
 

A:Adding a wifi router to router on static IP

Read other 9 answers
RELEVANCY SCORE 44.8

Hello,

I have a wireless adsl router in preparation for broadband arriving in our area soon (long story), and have some questions:

I have a laptop with wifi card and want to setup a home network with this, and my PC (plugged-in via LAN cable to the router).. laptop is XP, PC is Win2K
I can't seem to get this to work. one minute the PC can 'see' the laptop (in network neighbourhood) and then the other way round, but I can never access shared directories on either... is there a good guide somewhere to set this up?

Also, shouldn't I be able to use the router from the PC as if it were a wifi card?
i.e. on the laptop, once the wifi card is plugged in, it displays all wifi networks in the area and their signal strength etc.... how can I do this using the router/PC??

With the laptop I can connect to our neighbours wifi router and use their bradband connection, but I want to do the same from the PC.. is that possible?

Thanks in advance all..

(P.S. router is a D-Link DSL-604+)
 

A:Wifi Router / Wifi Network help!?!?

Read other 11 answers
RELEVANCY SCORE 44.8

Good Morning ,Forum/community Member Model Name - Hp Pavilion 15 Notebook (15-p001TX)Issues - Brodcomm 802.11n wireless Adpater not worning.Problems - I have been facing the same problem since 4 days and i have tried all possible ways to solve it out , but nothing work .Problems are as Follows :- 1) Wifi Stopped working within 15 mins of restart the computer and automatically the wifi icon goes limited , and then it automatically become the LAN(small PC icon) and after that notebook get hanged everytime.for re work i need to forcefully wtich it of from the power button.2) I followed all the tips and tricks for solving out the problem and even take Hp assistance help to sort out this wifi Problems. but nothing work.. no one helped me out of this problems.Following are the ways i have tried .1. that , power managent tick , i have un ticked (from PROPERTIES)2. by using CMD , i reset all 3. I have DONE Wlan auto cofig to disable (and put it on starting)4. update the drivers to the latest Version.5. Installs latest drivers of brodcomm from the HP website or even other websites.none of above help me out .3) All wired Network are working super fine , but when i swtich to wifi , it automatically goes limited and then diirectly hang the whole notebook . Please kindly suggests the valueable Suggestion and ways to get it sort out .it really frustrated now , i dont understand what are ways to get my wifi back on working condition.Thanks Kind Regard... Read more

A:wifi connectivity/wifi limitation Issues

Hello @adityarai82, Thank you for visiting the HP Support Forums! The forums are a great place where you can find solutions for your issues, with help from the community! I read your post about the WiFi issue, and wanted to assist you!  I understand that you tried many troubleshooting steps already, without success. Try reviewing the following steps, offered by community member @Great-Deku-Tree: First, we have a step by step guide to walk you through the troubleshooting process here: Troubleshooting Your Wireless Network and Internet Connection A second option, is to try these steps:Powercycle the network:1. Shut down your notebook.2. Unplug the power to your router.3. Unplug the power to your modem.4. Wait at least 45 seconds.5. Plug in the modem, and wait for it to come back online.6. Plug in the router, and wait for it to come back online.7. Turn on your notebook, and test your connection.Disable the Power Off option for the adapter:1. Open Device Manager. (Win Key+R > type devmgmt.msc > OK)2. Expand the Network adapters.3. Right click on the Ethernet/Wireless Adapter and click Properties.4. Click the Power Management tab.5. Remove the check mark beside Allow the computer to turn off this device to save power.6. Click OK.7. Test.Reset the TCP/IP settings on your PC:1. Go to your start screen/menu and type CMD.2. Right click on the command prompt icon and chose Run as administrator.3. In the window that opens type... Read more

Read other 5 answers
RELEVANCY SCORE 44.8

Well, as the title says, I am experiencing difficultly in getting the NAT setting on my Xbox 360 to Open status. I've searched in many places on the internet, including these forums for an answer and I've yet to find one which solves my issues, so I decided it was time to finally ask for help.

What I'm working currently working with is the Embarq P600R ADSL modem/router combo (If there's a more specific name for it, I don't know it as I don't have the packaging - I'm simply going by what was printed on the modem itself) working through my Linksys WRT54GS router by way of the ethernet ports of both units. The WRT54GS is then hardwired to four different computers, and broadcasts to my Xbox 360 wirelessly via microsoft's network adapter specifically designed for the unit (compatability between the adapter and router isn't an issue, just trying to cover all my bases). Because of this, all of the LAN ports on my WRT54GS are currently being used, preventing me from attempting to simply make my WRT54GS act as only access point, since to my knowledge I would need to plug the modem/router into one of its LAN ports instead of the ethernet port.

Thus far I've tried enabling UPnP on both units, setting up a DMZ for my 360's IP on the WRT, and Forwarding Ports 88 (TCP/UDP) and 3074 (TCP/UDP) on the WRT, both individually and simultaneously.

I also had somewhat of a breakthrough when I switched the P600R to bridge mode, as it gave ... Read more

A:Xbox 360 NAT Issues with P600R modem/router and WRT54GS router

Read other 7 answers
RELEVANCY SCORE 42.8

Hi, I hope someone can help me

Over the last few months I have been having intermittent problems watching Netflix on my Roku media streamer. (I could listen to the radio on there all day no issue). If I try and watch anything, after a short while it cuts out and the Roku has been disconnected from the Wireless Connection. I connect it again and I can watch some more Netflix... sometimes this happens 5+ times in one episode. Occasionally I get to watch a whole episode.

I spoke to tech support at Roku and was told to assign a DNS on my internet provider, they gave me the details and I got a tech minded friend to do it. Didn't help.

Another problem is my router will restart its self at least a couple of times a week. First off my laptop is unable to connect to the internet, then the router restarts and takes ages to connect to the internet again.

I spoke to talktalk tonight and apparently my connection is running a little slow, they have ''refreshed the connection'' and I've to keep an eye on it over the next couple of days and get back in touch with them if it persists.
I just feel like I need some (or a lot) more info on what I think I am talking about because I have no idea if they are just messing me around. I can't connect my Roku to the router with a wire it is wireless only. I don't have an ethernet cable to connect my laptop to the router either.
 

A:Roku/Netflix issues and router restarting issues

Read other 6 answers
RELEVANCY SCORE 42.4

Hi there

If you've a spare / old router which you can set up as a wifi bridge and connect a bit of LAN cable from Laptop into the Bridge router you'll generally get FAR better performance from even a cheap router.

Logic behind this is that most Wifi adapters are half duplex whereas a router is full duplex and throughput will be significantly better.

Another advantage is that you can still use 5 GHZ band even if your PC or whatever only can handle 2.4 GHZ wifi.

If your router doesn't have bridging facilities you can often do it by a firmware upgrade --for most routers try this :

www.dd-wrt.com | Unleash Your Router

Note --this is the Bridging router --not your main one that you use to connect to your ISP with --don't want to cause people to have inoperable boxes !!!!!.

I've found using a Router as a bridge far better than having to have loads of LAN cable all round the house --and also antennae in wifi routers are hugely better than most built in Wifi cards so you can in a lot of cases avoid extra slowdown caused by wifi extenders.


In my "man shed" -- a good 100 metres from the main house - could just about get 8 Mib/s on a very poor 2.4 GHZ wifi signal from the wifi card

Laptop now acceptable - still with 2,4 GHZ wifi but using "Bridged" method with an old EDIMAX wifi 4 port router. Around 70 Mib/s (still a lot slower by about 10X - I'm getting nearly 1Gb/s download in main house on 5 GHZ wifi --ISL has excellent Internet !!!... Read more

Read other answers
RELEVANCY SCORE 42

I have 2 pc's networked at my house using a broadband connection with a Netgear RP114/4 port router. The problem I am having with Age of Mythology(and all my games for that matter) is nobody outside my network can access my home pc's. My home pc's can game together with no problem. What I am trying to do is "host" a game using 1 of my 2 pc's and have other people connect to me. Netgear tech support is worthless and they keep giving me a guy who hardly speaks english and reads off Que cards. They keep telling me I need to turn on port forwarding and that I have to contact the game manufacturer to get those numbers and after all that only 1 of my 2 pc's can be accessed. There has got to be a way I can "host" a game from my house and have people connect to me. Any help I can get would be greatly appreciated.
 

Read other answers
RELEVANCY SCORE 41.6

i have the rogers cable router, and am trying to slave my linksys wrt160Nv3 to it.
my goal is to be able to share my media server wired to the slave (linksys router) to the ps3 wireless on the cable router.

i have read several posts on how to combine 2 routers into one.

what i have atm, the linksys is plugged from wan(or internet) to the lan#1 on the cable router.
router a (cable router) ip 192.168.101.1
router b (linksys) ip 192.168.102.1

both have wireless and i am using my lgx110 net book to config both wirelessly.

when i have the linksys set to 192.168.101.2 i lose it. cannot enter config from html. but i can still edit router a settings of router a, from router b

the ip ranges are staggered for dhcp to not interfere with each other.... i turn off dhcp on router b and lose connection access to internet and router b.

i've tried lan port to lan port also but no connection, due to the nature of router a i do not have access to all the settings, or at least its set up un-logically (yes i used un)

from router b
ipconfig /all

Windows IP Configuration

Host Name . . . . . . . . . . . . : Gobbin_mi
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Unknown
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : phub.net.cable.rogers.com

Ethernet adapter Wireless Network Connection:

Connection-specific DNS Suffix . : phub.net.cable.rogers.com
Description . . . . . . . . . . . : 802.11b/g M... Read more

A:cable router to router lan issues

Read other 9 answers
RELEVANCY SCORE 41.6

modem - router - PC - router... confusing? it gets better

im currently hosting a deticated counterstrike source server behind a router, its working now and all the ports are fowarded. However, i want to have a private network in my office that the tennants downstairs can't access, i have a seperate router for it, but i cant seem to bridge internet from the second eithernet adapter in the server to the second router. whenever i create the bridge, the server loses internet. DHCP on the second router is off, i dont know where to go from here. let me know any advice.

Thanks,
-Mike
 

A:issues bridging from router to router

First off, since you actually want the NAT layer to be active, I'm not sure that you actually want to disable DHCP. In this scenario, you also don't want any bridging, since as you say, this is a private network.

How about starting with the make/model of each of the router?
 

Read other 3 answers
RELEVANCY SCORE 41.6

How would one set up a home wifi network with a non-wifi router? I have a router for my voip phone but it is not wireless. Do I just add a wireless card to my main PC?

I do not want to remove my current router. None of the wifi routers I have looked at have VOIP ports on the back.

Will adding a wifi PCI card do the trick? Most of the wifi cards show them in use with a wifi router.
 

A:wifi with non-wifi router

what about a wifi access point that plugs into an ethernet port on your existing router?

you can use a wifi card to do the same, but its a bit fiddly..

by the way, is it just to network pc's only?
 

Read other 9 answers
RELEVANCY SCORE 41.6

my hp 15r005tx shows wifi connection only beside the router. it shows range for non of the mobiles hotspots or and wifi connections unless they are placed right beside it. Also the wifi range it shows is weak even when wifi router is right next to it. apart from all this looses after every 5-10 minutes i have tried upgarding and reinstalling drivers multiple times but it was of no use. this is my first computer and i dont have a lot of knowledge about computers, also upgrading the pc drivers when internet connection barely lasts for 5 minutes is a very hectic task for me. The service centre guy is in no mood to solve my problems and blames the windows 10 upgrade for this issue but this thing happend 2 months after the upgrade. i feel very helpless about this problem... PLEASE HELP ME!!!! i will be thankful for your reply...

Read other answers
RELEVANCY SCORE 41.2

The thing is that I want a n router, a wifi one. Now I want QoS and good port forwarding since is going to be for gaming. Also it has to have good coverage.
Also I have heard about some that come with a USB extension for a hard drive so you can have a newtowork hard drive. Is that true or you need a nas hdd for that?

So as you can see I would appreciate a lot of feedback, some models, brands, links, etc. It's all going to help.

Thanks guys.

A:Need a new wifi router

Bump
anyone?

Read other 1 answers
RELEVANCY SCORE 41.2

i have Macbook pro 2011 model. Currently i am using network via ethernet, but since few month my mikrotik RB951 wifi router in not working. I tried to reset to the router but its not connecting. my computer also could not open its setting by its number 192.168.168.1. please help in this concern.
 

A:wifi router

Try doing a FR (Factory Reset) on the router

Might need to be replaced
 

Read other 1 answers
RELEVANCY SCORE 41.2

What wifi router should i get for windows 7? if it helps i have a lenovo tower. thanks
 

A:Wifi Router

Read other 13 answers
RELEVANCY SCORE 41.2

I am using virtual router+ in my laptop....and using wifi with my xperia L.....but for a few days after connecting wifi with my phone it's not working...it just works for a second then autometically disconneted......its neither my mobile problem nor software it just a problem of my laptop.....please give me a solution.....what should I do?????????????
 

A:Wifi router

Simplest and easiest solution is the get a "real" wireless router & connect your laptop & phone accordingly.

Need a few questions answered before we can really help you further because there are too many vague things in your initial question...

Who is the ISP?
Did the ISP provide you with a cable modem or DSL modem? Does it have built in WIFI?
How did you setup the wifi from the virtual router software? WEP, WPA, etc?
Is the laptop connected to cable/dsl via wire or is it wireless? if it's wireless then for God's sake just use that wifi for your phone as well!
Is the laptop a PC or Mac? What version of Windows or Mac OS X are you running?

Post back, Hope this helps!!
 

Read other 1 answers
RELEVANCY SCORE 41.2

Hi. Quick question I need a precise answer to, if possible.

If someone has wifi pass and access directly to network they can only access the wifi transmission part and if I don't send any traffic via wifi and if I disable the router page from wifi connection so they cant make changes, then my PC itself and its traffic is safe, while I'm on wire?

Say my router itself or other devices connected to it or wifi or anything related to the router is compromised, or someone knew default router page PW, the router was reconfig, ath.

Thanks!!
 

A:Router, wifi and PC

Unless you enable Wireless Isolation in the router wireless and wired clients are on the same network and have access to whatever is on either network. Wireless isolation is generally only an option for guest wireless networks. Disabling the router configuration page doesn't prevent access to the wired network.

If you don't trust people, don't let them onto your network, nothing beats that for protection. Aside from that don't give out your wireless password, change the default router configuration password, disabled remote administration, change the wireless encryption type to WPA2-AES and change the wireless password to something not easily guessable. If your router supports a guest network use that for everyone who doesn't live there.
 

Read other 1 answers
RELEVANCY SCORE 41.2

Have a verizon router actiontec mi424wr all of the sudden I cannot conect to the internet thru wifi I have directv 2 laptops and a cell phon and now nothing will connect to the internet had verizon send me a new router and still same problem. I get 2 messages one connection is limited and the other not valid ip address. can anyone help
 

Read other answers
RELEVANCY SCORE 41.2

So currently i have a Netgear WNR2000V4 and it sucks! the speed of it drops from 60mbps to 20mbps and stays there. even after reboot. it sucks and nothing will fix it.

so im in the lookings for a new router. im looking to spend less then $70. anyone know of a really good 300mbps router? i will be connecting 10+ devices to it at all times.

i was looking into these but open to suggestions:

D-Link Xtreme Gigabit Wireless N300 Router (DIR-655) - Newegg.com

TP-LINK TL-WR1043ND Wireless N Gigabit Router Up to 300Mbps/ USB port x1/ Detachable Antenna x3/ IP QoS/ QSS Button - Newegg.com

A:Wifi Router

anyone? ideas?

Read other 1 answers
RELEVANCY SCORE 41.2

I have a Belkin wireless router. I have a Belkin wireless print server. The router is not connected to the Internet because where I live, only has WIFI service. Which means I also have a Linksys Speed Booster,WUSBG54 to connect to the internet. My problem is that my print server will only print if the CAT 5E is connected from my laptop to the router. At that point I lose my Internet connection. I have to unplug the CAT 5E from the back to gain Internet access.
Is this the way it has to be?
 

A:WIFI Router

Configure the router and get the wireless printer to work. Through the router, (it should not need the internet to print), Then Configure the wireless adapter to connect to the internet. Not sure, but it should work.
 

Read other 2 answers
RELEVANCY SCORE 41.2

Windows 10 trendnet tew711br TWC ethernet connection

Worked ok at first than I forgot password and tried to reset. Now all I can get is ethernet and cannot connect to chromecast or other devices. Wifi sign is there but it remains on ethernet. Help and thanks.
 

A:Cannot get router to go wifi

Read other 16 answers
RELEVANCY SCORE 41.2

Hello everyone,

I recently updated my router after about 10 years to a netgear nighthawk I am 99.9% sure that i hooked everything up right but when I go to log into my new WiFi i still see my old WiFi pop up and it still works. Is it normal to still see your old WiFi and have it still work after upgrading your WiFi router?

Thank you!
 

Read other answers
RELEVANCY SCORE 41.2

Present router:
Netgear N900[WNDR4500]wifi router.
Wired it gets 125
wifi[in SAME room or any place in house, ]always low 20's

I understand the newer "AC" wifi routers are superior, would an "AC router"help me get over low 20's wifi through out my house[rectangle shaped 2500 sq ft/dry wall construction/NO BRICK,etc]...?

Kindly recommend a new product, ty
 

A:Should I get a new wifi router?

btw, the Netgear N900 router is wired to SURFboard SB4161 Modem...fyi
 

Read other 1 answers