Over 1 million tech questions and answers.

get the HP Deskjet 1000 j110 printer to work in Windows XP 64

Q: get the HP Deskjet 1000 j110 printer to work in Windows XP 64

Is there any way or any work around to get the HP Deskjet 1000 j110 printer to work in Windows XP 64? HP says the j110 is not supported for xp 64 but I was wondering if anyone had messed with this and figured a way with some other drivers or some way to make it work in the os xp-64?
Thanks

RELEVANCY SCORE 200
Preferred Solution: get the HP Deskjet 1000 j110 printer to work in Windows XP 64

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: get the HP Deskjet 1000 j110 printer to work in Windows XP 64

If HP doesn't have the drivers, then you aren't likely to find a "work around". I've seen drivers hacked to correct problems or enable features, but I've not seen drivers created for non supported hardware.

Read other 3 answers
RELEVANCY SCORE 112

I have this HP printer with my windows xp system. I was printing a couple pages yesterday and it was ok, then I discovered I made a mistake and needed to print it again, and I didn't do anything different.... but it suddenly turned extremely s-l-o-w. When I clicked print it just sat there. The print dialog box said "printing". It sat so long that I canceled it, eventually when I printed again I discovered that if I wait long enough, it took the paper in, then printed like 1 line and stopped, few minutes later 1 more line, etc I canceled it.

When I try to print a test page, it does the same thing. I went into the toolbox and tried the "clean" function, but that would not work - it said "device busy". I tried to align the printer, but that also said "device is busy". It won't let me do anything!!

I also tried to re-install the drivers, but it says the driver is not on the disk (i have the original disk!) and a generic driver didn't work.

I can't do anything with it. This just suddenly happened. How can I fix this?
 

A:Solved: HP Deskjet 1000 J110 VERY Slow

Read other 6 answers
RELEVANCY SCORE 83.2

I'm trying to check the ink levels for my printer. For HP Deskjet 1000 J100 series. I've installed and set up the printer but don't know where the control panel or HP toolbox is. I opened the HP Deskjet icon, but the only thing that opens is a window asking if I want to install a new printer. I opened the HP Smart app, and the printer says that it's Ready, but when I click on printer settings, then print quality tools, it says "This feature is not available for your selected printer through HP smart app. To check control panel."

I've been going around in circles trying to find the control panel or toolbox. Also, I've been using the printer for a couple of years now, with no problems. So it's hooked up correctly. It's only now I decided to use the Check Printer ink function.

Maybe I need to install another driver or something. All I want to do is check printer ink levels. Please help.

Thanks, Josie
 

Read other answers
RELEVANCY SCORE 82

Just purchased an inexpensive HP printer (Deskjet 1000 J110a). In the past I've done a lot of printing, on 2 different printers, from PhotoImpact Pro 13--without problems. But with this new printer, while the image on the print preview screen looks ok, it prints twice as wide as it should--but no taller. The problem does NOT extend to other software such as MS Word, Paint.

If I skip the print preview screen, it prints correctly. But then I can't re-size or move the image where I want it.

Any ideas?

Thx
 

A:HP Deskjet 1000 J100a Printer & PhotoImpact Pro13

SOLVED!

Found my own solution. Have to install & use the universal driver HP Deskjet 990c.
 

Read other 1 answers
RELEVANCY SCORE 70.4

tell me the solution! i get problem with my hp printer, the specifications is hp deskjet 3535, can't work in windows 7. thanks for the help!!

A:how hp deskjet 3535 printer work

the hp website states that the driver is included with win7:

Installing the Product with the USB Cable and Using the Windows Update Driver or the Driver Located in the Windows 7 Operating System HP Deskjet 3535 Color Inkjet Printer - HP Customer Care (United States - English)=

Read other 1 answers
RELEVANCY SCORE 70.4

hello guys, my printer not work.
erorr message : device not connected.
but I hooked up the socket

i driver downloaded this link : https://www.hpdriver.org/hp-deskjet-3630-driver/
thanks for help.
 

Read other answers
RELEVANCY SCORE 69.6

Hi,

Hope somebody can help with this. I have a new Vista Premium 64, it has it's own driver for the above parallel port printer (about 10 years old!), which is installed. If you try to print the job will spool and sometimes the printer will spew out a blank page or two, but usually the printer just makes a noise to start up printing and then the power light just blinks, the job disappears from the print job window in vista - and thats ya lot! Any thoughts/ help appreciated.

Regards,

Chris

A:HP Deskjet 720C printer does not work on Vista 64 - help!

Try this driver :
HP Deskjet 720C Driver

Read other 11 answers
RELEVANCY SCORE 68.8

Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft® Windows Vista™ Home Premium, Service Pack 2, 32 bit
Processor: AMD Athlon(tm) 64 X2 Dual-Core Processor TK-53, x64 Family 15 Model 104 Stepping 1
Processor Count: 2
RAM: 1917 Mb
Graphics Card: ATI Radeon X1200, 128 Mb
Hard Drives: C: Total - 151122 MB, Free - 102361 MB;
Motherboard: ATI, SB600
Antivirus: McAfee Anti-Virus and Anti-Spyware, Updated and Enabled
 

A:HP Laserjet 1000 Printer won't work with Vista, is there a fix? Thanks

Here is the support site for the HP Laserjet 1000 printer.

This is an extremely old printer that supports Windows 2000 and Windows XP.

There is no support and software driver package for Windows Vista.

----------------------------------------------------------

Your other thread is obviously related to this same problem, so I've requested your other thread be closed.

----------------------------------------------------------
 

Read other 1 answers
RELEVANCY SCORE 61.2

Hi

I'm trying to get my printer to work on my laptop with windows 8.1 pro 64 bit.

Here are the deafult port settings after it self installs.

When I run the HP print and scan doctor it says:
I've done this and it hasn't solved it!

What is the correct port to solve this port mismatch?

Any help is appreciated.

Many Thanks.

Alex

A:HP Deskjet 450 Printer Can't Connect To Windows 8.1

The installer will figure it out when the printer is connected during installation.

Read other 2 answers
RELEVANCY SCORE 60.8

Hp shows a Windows 7 driver for the HP Deskjet 710C printer.
Will this driver also work for the HP Deskjet 712c? Thanks for
your reply.
Gary

A:Windows 7 driver for HP Deskjet 712c printer...

Welcome to Sevenforums, Gary
It has been said that some printer drivers will work on different versions of printers. Give it a try to see. You may have to just use one for your own model that is not for 7. To do this run it in compatibility mode. Good luck to you and Enjoy 7 and SF.

Read other 5 answers
RELEVANCY SCORE 60.8

I am looking for HP Deskjet printer driver for windows 7. I have a lot of cartriges #21 and 22 left. Please help

Read other answers
RELEVANCY SCORE 60.8

Hi

Can anybody please help!!!

I am having Windows 7 OS in my laptop. Tried to connect HP Deskjet 610c printer with the laptop using cable wire. In Windows 7, I searched for Windows update and it recognized the said printer. Now, the printer is added and I am also able to print the test page.

Now, the problem is- if I am trying to print any other document (File--->Print) then the printer prints some special character #$% etc instead of printing the document properly.

I referred the following link-


http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01874792&cc=in&dlc=en&lc=en&os=4063&product=58708&sw_lang=#N457

What will be the solution for this?
OR
can anybody please tell the detailed steps to connect HP Deskjet 610c printer with WIndows 7 OS?Thanks.

A:How HP Deskjet 610c printer works with Windows 7 OS

Welcome Sarita to the windows 7 forums.

When you say you connected the printer via a cable wire. Did you mean via a USB cable?

Also, did you download from HP the proper drivers for you version of windows 7? ie 64 bit windows 7

Also, many times, before you connect any usb printer, you should install the proper software
and then when It asks you, then plug in the printer and turn it on.

This usually installs the printer correctly.

Rich

Read other 4 answers
RELEVANCY SCORE 60.8

Hello,

I have a HP Deskjet D1660 Series Printer, which on an XP operating system I had no problems with at all.

I came to install this printer on my 64-bit operating system Windows 7 netbook and cannot do so.

I entered the CD and soon realised that I needed a different driver for windows 7, proceeded to download this driver, but when I open the .exe file, it tells me it's extracting, which it does to 100% and then nothing happens.

I have tried using the HP installation wizard, and a similar thing happens - the program recognises my printer, downloads the relevant driver for me, tells me it's extracting it, but then takes me back to the start; identifying my printer.

If anybody knows of anything that could help I'd be very grateful!

Thanks.
 

A:HP Deskjet D1660 printer will not install on Windows 7

That's the correct full feature driver software package for Windows 7(64-bit).

Are you downloading and SAVING it, then closing all open windows first, then double-clicking it to install it?

---------------------------------------------------------------

Read here for installation instructions.

---------------------------------------------------------------
 

Read other 3 answers
RELEVANCY SCORE 60

I have tried a lot to install hp deskjet 845C printer on windows 7, but not succeeded. Any one can help me plz. Is there my hp deskjet 845C printer is useless after installation of windows 7?

A:Help needed to install hp deskjet 845C printer on windows 7

Hi there ... Read the Link below .. If you follow the Instructions you should be able to get your Printer Installed ...

Installing the Printer Software in Windows 7 for a USB Cable Connection HP Deskjet 845c Printer | HP? Support

Read other 2 answers
RELEVANCY SCORE 60

Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft Windows 7 Home Premium , 64 bit
Processor: Intel(R) Core(TM) i3 CPU M 330 @ 2.13GHz, Intel64 Family 6 Model 37 Stepping 2
Processor Count: 4
RAM: 3894 Mb
Graphics Card: Intel(R) Graphics Media Accelerator HD, 1723 Mb
Hard Drives: C: Total - 291440 MB, Free - 237490 MB; D: Total - 13499 MB, Free - 2246 MB; E: Total - 99 MB, Free - 92 MB;
Motherboard: Hewlett-Packard, 3658, 32.24, CNF0131F3X
Antivirus: Kaspersky Internet Security, Disabled
I loaded the driver but it will not recognize this printer while it is directly
plugged into the computer!
 

A:Printer HP laser Jet 1000 how canI run in windows 7

Did you follow the install directions? In most cases the printer is not connected until after the printer driver is installed.
I assume you downloaded the 64 bit driver.
 

Read other 2 answers
RELEVANCY SCORE 59.6

So i want to remotely print from my Windows 7 laptop to my shared HP 5740 on my Windows XP desktop. It prints backwards no matter what.
Even if i enter print settings (in adobe reader) and select reverse pages or mirror image,

Option 1: Uncheck Reverse Order, Uncheck Mirror Image = prints backwards
Option 2: Uncheck Reverse Order, check Mirror Image = prints backwards
Option 3: check Reverse Order, Uncheck Mirror Image = prints backwards
Option 4: check Reverse Order, check Mirror Image = prints backwards


I would post screenshots here but this stupid site only allows images from url and it doesnt work when you do

please let me know thanks

A:Printer HP deskjet 5740 on Windows XP prints backwards from remote Windows 7 laptop

Hello, and Welcome. Can you post this at the sister site of Windows 7 Forums : Windows 7 Forums
I think they are better able to assist you. Thanks.

Read other 7 answers
RELEVANCY SCORE 58.8

Hi I recently updated my Windows 8 to Windows 10. I also downloaded the new driver ( Just really not sure if this driver is for Windows 10). And now my printer cannot be detected by my Laptop. Pls Help Thanks













Solved!

View Solution.

A:HP deskjet 1015 wont work on windows 10

The full solution software includes everything you need to install and use your HP printer. This collection of software includes the complete set of drivers, installer and optional software.File name: DJ1010_188.exe Alternately, The HP Printer Install Wizard for Windows was created to help Windows 7, Windows 8/8.1, and Windows 10 users download and install the latest and most appropriate HP software solution for their HP Printer.Simply run the tool and follow the on-screen instructions.File name: HPPIW.exe

Read other 3 answers
RELEVANCY SCORE 58.8

I know there are no Windows 8.1 Drivers for the LaserJet 1000, but it is a great printer and I would like to continue to use it. Is there a work around solution for the driver for this printer?
I am using a Dell 64 bit machine. The printer is connected directly to the PC. I do not have a network.
Too bad HP would not continue to support this printer. When I asked HP about the driver they said I could trade the machine in for $6 (yes six) on the purchase of a new HP printer if I bought it directly from them at MSRP. Let me have some time to think about that one...
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 8.1, 64 bit
Processor: Intel(R) Core(TM) i3-4130 CPU @ 3.40GHz, Intel64 Family 6 Model 60 Stepping 3
Processor Count: 4
RAM: 8108 Mb
Graphics Card: Intel(R) HD Graphics 4400, -2016 Mb
Hard Drives: C: Total - 944218 MB, Free - 904378 MB;
Motherboard: Dell Inc., 088DT1
Antivirus: McAfee Anti-Virus and Anti-Spyware, Updated and Enabled
 

A:Windows 8.1 Laserjet 1000 work around

Read other 14 answers
RELEVANCY SCORE 53.6

Using HP 648C Deskjet printer, the problem is that when i try to print
something the paper and power led start flashing and my screen says
that i am out of paper when i have plenty of paper. I can get rid of the
error message and the flashing leds by shutting off the power and
turning it back on but the problem comes back when i try to print
again. Can anyone hell me with this problem?
 

A:HP 648 Deskjet printer

Georg: Checkout this website and see if any of the links solve your problem......

http://www.hp.com/cgi-bin/cposuppor...jet620191&ctflag=&iqry=&ctry=&lang=en
 

Read other 1 answers
RELEVANCY SCORE 53.6

I'm running Win XP Pro on an AMD 2000 Thunderbird with 512mb memory. I have an HP Deskjet 500 running on my parallel port. The printer is working fine, but whenever I send something to the printer, my system practically comes to a standstill until the printing is complete. Seems like this should not be happening? I went to the HP web site to get a newer printer driver and it shows one available, but I cannot for the life of me figure out how to get the +_)(*&^%$#@! to download!
 

A:HP Deskjet 500 Printer

Read other 6 answers
RELEVANCY SCORE 53.6

I have an HP Deskjet 320 portable printer and have installed the drivers on my Compaq 4110 Laptop computer. Brand new cartridge in the printer. When I print it prints bars of print approx 3/16 high with white lines between them. The bars are printed great. Does anyone have any idea how to eliminate this problem?? Does the same thing when printing text.
 

Read other answers
RELEVANCY SCORE 53.6

I'm running Win XP Pro on an AMD 2000 Thunderbird with 512mb memory. I have an HP Deskjet 500 running on my parallel port. The printer is working fine, but whenever I send something to the printer, my system practically comes to a standstill until the printing is complete. Seems like this should not be happening!

Does anyone have any suggestions for how to fix this?
 

Read other answers
RELEVANCY SCORE 53.6

I cannot get my DesKjet 720C to print in colour even after I turn off the check in the "print in greyscale" box under colour. I noticed that the apply button at the botom of the window does not activate when I change properties.
 

A:HP Deskjet printer

Check your color cartridge. It could be clogged too. You can clean the jets via the printer properties.
First make sure you have version 10.3 of the Hp drivers.

http://www.hp.com/cposupport/printers/software/dj720en.exe.html

the newer version 10.3 isn't much different feature wise, but it could have some fixes. That is what version I use.

Check the settings in the printer properties too. Make sure your print quality on normal and the proper paper type selected. Put colorsmart II on automatic. Disable ICM.

You may have to uninstall the older drivers first. You could also remove the printer from the device manager, have windows detect again and then install the 10.3 drivers.

[Edited by Shadow2531 on 08-16-2001 at 06:52 PM]
 

Read other 2 answers
RELEVANCY SCORE 53.6

To change printer properties one can either go to settings-printers-properties or to the properties tab on the window that appears after the file-print menu. When I change printer properties using the first option, I find that the settings are not changed unless I change them again using the latter path. This happens repeatedly when I change the "print in greyscale option".
 

A:HP deskjet printer

I just double checked mine, I have a DeskJet 640 C, and an OfficeJet 600, and it stays changed on both....when you change it, are you hitting ok, or just closing the box?
 

Read other 1 answers
RELEVANCY SCORE 53.6

I posted this same question a couple of weeks ago and got no replies, so I am trying again...hopefully someone will read it and have an answer.

I just got an HP Deskjet 320 portable printer and attached it to my Compaq 4110 laptop. I am running Win 95 on the laptop and installed the drivers that I downloaded from HP. The printer prints quite nicely except that approximately every 3/16 of an inch there is a white line. Other than that the print quallity is super. Does anyone have any suggestions as what I might do to alleviate this problem?
 

Read other answers
RELEVANCY SCORE 52.8

Hi.

I have received a HP Deskjet F2492 All-in-One Printer.

Can anyone tell me if it has wireless lan ?.

I have searched the HP site, but havent found anything about lan for this printer.

It can run via USB, and does it.

I also think it can be shared via USB, but then I think that the computer to where it's being installed with shall be active all the time.

A:HP Deskjet F2492 All-in-One Printer

Hi there ... I take it you did not get a Manual .. Should be some thing in there

Manuals for HP Deskjet F2492 All-in-One Printer | HP? Support

Read other 3 answers
RELEVANCY SCORE 52.8

I have a Windows XP with a HP Deskjet 895cse printer. My printer will print from the Internet but makes all the right noises but prints nothing from MS Word.
I have uninstalled and reinstalled the printer but that does not fix the problem. Any suggestions? Also, I can not find HP toolbox.

In an effort to clean up my computer so that it would not run so slowly, I ran defrag and removed a number of old programs that were only frequently used. Prior to all the cleanup, this printer performed very well.
Thanks,
 

A:HP Deskjet printer problem

Read other 12 answers
RELEVANCY SCORE 52.8

I hope someone can help me with this problem. my Printer has worked fine up until the last few days. So I deleted it and am trying to reinstall it, with no luck. This is the error message I get when I try to reinstall my printer, this is the error message I get.

This printer cannot be installed now because it's driver.
{You_must_use_the_supplied_setup_program_to_install-this_

printer!} could not be loaded.
The driver or the INF file may be damaged. Restart Windows, and then try again.
I have tried restarting and tried over and over and it still won't work. I have the setup CD, but it still won't install. Any help would be greatly appreciated.
.
 

A:HP Deskjet 952C printer

Read other 15 answers
RELEVANCY SCORE 52.8

Does anyone have an HP deskjet 5550 printer?

I was given this printer bare with no install instructions, no cd,etc.
I already had a spare usb cable and i got the install instructions and drivers from HP. I installed this printer into a spare test unit that i keep just for testing. Its P3 733 and has win xp pro. At least i tried to install it, no way, kept asking for files that werent there. I contacted HP who told me to install HP 550C drivers instead.
I did that, and with some other adjustments, like having to uninstall usb drivers and rebooting so system could re-install them,and a few other adjustments, its working. The tech guy told me "The issue seems to be with the some of the missing files from the Deskjet 5550 drivers which are required by the Operating System"
My cousin, who gave me the printer, installed it fine in his P4 system and he has win xp pro w sp2 installed.
I dont have sp1 or sp2 installed in my test unit.
I dont want to install the HP 5550 in my main unit as i have a Lexmark 4350 all in one unit that i like, although i do have sp 1 installed there.

My questions are:
Would the absence of sp1 and\or sp2 make a difference in wether one could install the 5550 drivers instead of having to revert to the 550 drivers?

If anyone else out there has this printer installed with either set of drivers, can you tell me if you have sp1 or sp2 installed?

I hope to get some idea of other peoples installations and if they had any issues with thi... Read more

A:Does anyone have an HP deskjet 5550 printer?

Try this
http://www.softwarepatch.com/utilities/hp5550.html
 

Read other 4 answers
RELEVANCY SCORE 52.8

I hope someone can help me with this. I have tried everything.

I purchased this printer at christmas. I had a hp deskjet 920c and thought I would like a newer one. I hooked everything up by the directions. When I tried to print out something all I got was A bunch of letters, numbers, symbols etc.
I called hp tech support. We went through the whole set up again and even changed out the cables. Uninstalled and reinstalled the printer. Still same thing.
HP sent me a new printer. Guess what ? Same thing again.
I called again. We went through the same thing again. No luck.
To make a long story short. I am waiting on my 4th printer to come in the mail.
I am running windows ME.
My son has a pc and it has windows xp. I hooked up to his and the same thing happened.
This is really starting to get the best of me. I have used a lot of HP products before and never had any problem.
I no you can get a lemon sometimes but come on three in a row.
Please can someone offer any help........
THANKS
 

Read other answers
RELEVANCY SCORE 52.8

After I re-filled my black ink cartridge (for about the 5th time) I get an INCORRECT INSTALLATION message on my screen.

I have re-installed the cartridge several times, cleaned and checked all the connect pins and even put in a new HP 45 black cartridge. No help!

The material prints jut fine if I press the OK on the message and in fact prints ok even if I don't press OK.

IDEAS?

Thanks,
shortcut
 

A:HP DeskJet 722C Printer

Read other 6 answers
RELEVANCY SCORE 52.8

I have a HP Deskjet 842C. It uses a Parallel port, and hasnt been used in a while. When I turn it on, it does its "reset" routine, and as soon as it stops, all three lights flicker very fast. If I press the resume button, then the power and the resume lights flash, slow this time. The only other option i have is to turn it off, and if i turn it back on, it goes through the whole loop again...
Any help would be appreciated thanks.
 

A:HP Deskjet Printer problem

When you say"hasn't been used in awhile" how long are we talking? Sometimes ink will harden to a point that thingsdon't want to move(just like rust). I'd remove the cartridges and clean the sliding bar,or whatever the proper name is, with a Q-tip with rubbing alcohol and the cartridges also. This definately will not hurt, just be careful..
 

Read other 1 answers
RELEVANCY SCORE 52.8

I am posted this at bleepingcomputer for others to see that may be having a hard time installing a printer driver after a Windows 7 32-bit repair installation.  
 
 
Cut & Paste from post on HP website;
 
HP Deskjet 6540 need driver


 
‎06-05-2016 04:35 PM

Product Name: HP 6540
Operating System: Microsoft Windows 7 (32-bit)

https://support.hp.com/us-en/contact-hp/product/HP-Deskjet-6540-Printer-series/357210/model/357212?s...
 
Printer still very good condition.  Did Windows 7 repair install now cannot get printer to work.
HP Installation CD is outdated.  Cannot get Windows 7 Home Premium CD to install driver.
 
Sometimes I can get HP Deskjet 6500 Series to appear in Device Manager then it disappears.
 
And where is the HP printer drivers located on the Windows 7 Home Premium Disk?
 
This printer has worked flawlessly for years, worked on this Dell Desktop for years.
 
Just need a little help.
 
thanks,
 
TxTrapper
South Texas
-----------------------------------------------------------------------------------
Cut and Paste from HP Website;
 

Re: HP Deskjet 6540 need driver


‎06-05-2016 07:04 PM
 
I managed to fix it.  What I did was go into REGEDIT and type in "Find"  HP Deskjet
 
I had to remove about 30 entries.  Then I restarted the computer.
 
Then I went into "Add a printer" network printer,  \\Oxxxxx... Read more

Read other answers
RELEVANCY SCORE 52.8

Hi a problem on a friends machine they upgraded their motherboard and processor, but when they tried to install their HP Deskjet 845c usb printer the instalation failed.

The usb cable and hub have been checked and the other three usb items are working.

Any ideas please: all I can think of is that the instalation disc might be faulty or there is some kind of software conflict

moose69

 

A:HP Deskjet 845c usb printer

Read other 8 answers
RELEVANCY SCORE 52.8

Is a HP Deskjet 5650 capable of printing custom length banners? I have everything selected on the printer page that has anything to do with printing banners with no result.

I am using Inkscape to create banners and then print the banners.

I am trying to print a 40 inch long banner. (I will generally be
printing banners between 24 and 40 inches long.) When I try to print the
banner, only the first page prints. Everything then stops like the
print job was completed. I get great one page banners but....

I am using a PC running XP with an HP Deskjet 5650 printer. I then tried to print a
banner using my second computer which has Win 98se and a different HP printer
with the same results. I conclude that I am not setting Inkscape
correctly for printing the banner of this size. Is this a correct assumption?

I am using Inkscape 0.42.2. The banners look great on the screen but... Please
help me to print the complete banner(s).

Thank you so much in advance.

jt
 

A:HP Printer Deskjet 5650

Read other 6 answers
RELEVANCY SCORE 52.8

I have a Dell 400 MHz w/128 ram and an HP 722C printer. recently, the printer started taking an extremely long time to print. When I print something, the first line or so prints normal and then there is a really long pause. Than another line will print. Then a really long pause, etc. Eventually it will just stop printing altogether. I have tried re-installing the drivers and this issue was not resolved.

Any ideas?

Thanks.
 

A:HP deskjet printer issue

You might try this driver. I think most of the 722s shipped with the 10.0 driver. http://h20015.www2.hp.com/en/softwa...c=en&softitem=Microsoft Windows 98&sw_lang=en

When you say you reinstalled the driver did you remove it in add/remove programs? You have to do that and it is probably best to remove the printer from the printer folder as well. Reboot the computer and cancel out of the new hardware box for the printer. Install the software and reboot and it should show up.

First make sure it is showing as an EPP or ECP printer port on the details tab in your printers folder: Start>Settings>Printers. You might also mess with the spool settings, but note what they are so you can reset them.
 

Read other 1 answers
RELEVANCY SCORE 52.8

I want to connect my 'redundant XP' via a USB cable to see if I can use it as a printer server. It does not detect the presence of the printer which is however shown as installed. When I click Add Printer the response is that 'spooler is not available.' I have not been able to find 'spooler' on the XP. How do I deal with this?

Read other answers
RELEVANCY SCORE 52.8

I've been unable to print even B/W text with my HP Deskjet 940c for some time, and the status light is blinking to indicate an installation problem with the color cartridge (rather than just an empty cartridge, although it probably *is* empty). I've tried unplugging and replugging the printer, wiping off the copper contacts, firmly reseating, etc. Because it used to work, I assume the cartridge itself isn't defective. I'm trying to gauge whether it's worth gambling $35 for a replacement cartridge if it turns out that the problem is something else and the printer will have to be replaced anyway. (I'm reluctant to do that
unless it's necessary because it's hard to find a model that will be economical over time given that our usage is low, we don't print much in color, and we never print photos.)

Any ideas about whether a replacement color cartridge is likely to work?

Thanks for any help!
 

A:HP Deskjet Printer Problem

Read other 14 answers
RELEVANCY SCORE 52.8

Although I use a Canon printer myself, a friend has asked if I could help with a problem on his HP deskjet. We are both so called "silver surfers" but I'm reasonably literate. My friend is completely new to it all. I installed the printer according to the book and it appeared to work on normal b/w text A4 plain paper. However on trying to print colour text the printer simply started then hung and would not budge.
I uninstalled it using Windows (VIsta home premium) uninstaller and re-installed it. (He uses a Dell laptop in the Inspiron series.) It appeared to finish the re-install but the CD icon stayed spinning on the screen and I had to close down to get rid of it. Again the printer would produce a test page and b/w text but not colour text where there was a mix of b/w and colour text. One thing I would add is that on the 3rd attempt to reinstall it did not completely finish the reinstall but went into a loop? at the "installing software" line. However it would stll print b/w text. Can you please help? We would have gone gray in the head by now if we were not already there.
Thank you
Vatten
 

A:HP Deskjet D1660 printer

Firstly you might like to consider going to the printers support pages on the manufactuers website. See if you need an update to the drivers for the printer.
Second. Have you tried your canon on the other machine ?
As you probably know, when it comes to fixing anything techy its a case of trial and error in tracking down the fault...and its always the last thing you try

It the printer is fairly new then it most likely a software/communication problem between both machines.
The fact it hangs when being installed suggests this.
When my HP plays up I have to switch off my lappy and then it prints,yes I need a new one ..lol

If its an old machine then it may not work with Vista or might work with Vista but only 32bit machines.

Not printing colour means it was not told too.
Printer stopping means its busted or its waiting for information.
Again it seems to point to communication issues which in most cases means driver update or a sharp blow to the side of the machine. I would opt for the former as the latter can get messy
 

Read other 3 answers
RELEVANCY SCORE 52.8

My problem is that everytime I print, I have a ArcadeTown download pop-up with instructions for setup. I had downloaded a Alien Shooter from ArcadeTown at one time for my grandson and he hated the game. I uninstalled it and now everytime I print I get this setup download. I have tried to delete it from as many files as possible, but can't seem to get rid of it. Any suggestion? I would uninstall my printer and re-install it but I got the computer and printer from a friend so I don't have disk for printer installation. If I knew more about computers I could probably download from a site, but I am not that computer literate. Thanks for any suggestions. Lana
 

A:Printer Deskjet 712C

The printer drivers are all downloadable for every Windows version from HP.

If we knew your Windows version a more direct link could be found, but go to http://welcome.hp.com/country/us/en/support.html?pageDisplay=drivers

And enter 712C in the window and go from there.
 

Read other 2 answers
RELEVANCY SCORE 52.8

Hello, This is my first post. We have an HP Deskjet 6980 printer that we use wireless. The problem that we are having . Is the Network light keeps flashing and we aren't able to print.
 

A:HP Deskjet 6980 printer.

Have you configured the printer with the network information? It looks like this printer supports WEP and WPA. Print out your network settings and see where you need to provide input.
 

Read other 2 answers
RELEVANCY SCORE 52.8

My sister is trying to connect her chrome book to a HP DeskJet 2548 printer but it won't allow her. we have been working on this for hours and no luck.

Read other answers
RELEVANCY SCORE 52.8

I cannot uninstall an HP Deskjet 460 printer.

Nothing happens when I click on it in Add/Remove programs or on its uninstall facility in All Programs.

It seems to have become corrupted and I need to re-install it.

Be glad of some help
 

A:Cannot uninstall HP Deskjet 460 printer

Try the free Revo Uninstaller.
 

Read other 2 answers
RELEVANCY SCORE 52.8

I downloaded Windows 10 when Microsoft offered it..now my printer Lexmark X8350 will not work and I went into lexmark to download the drivers, however there is no driver for windows 10 ..Now what do I do..buy a new printer..jerrysgirl777

A:windows 10 and lexmark x8350 printer . my printer won't work...

Hi there @jerrysgirl777?Welcome to the HP Support Forums! It is a great place to find the help you need, both from other users, HP experts and other support personnel. I understand that you cannot get your Lexmark printer to print after upgrading to Windows 10. I am happy to help with this. If there is a driver for your printer for Windows 8.1, then you could try that, otherwise I would recommend that you contact Lexmark support. It is possible that  they have a workaround that would allow you to print for not until a full service driver becomes available. Lexmark X8350 - support.lexmark.com

Read other 2 answers
RELEVANCY SCORE 52.4

I borrowed a friend's laptop (Dell Latitude) that is running Windows XP operating system.
I need help in finding a printer driver for an HP Deskjet 5740 printer. The CD that came with the printer doesn't recognize Windows XP.

Please help!

A:Printer Driver for HP Deskjet 5740

I find that a bit hard to believe. An Hp cd and Xp doesn't recognise it? If that is the case go to HP.com, the driver for your machine is there.

Read other 3 answers