Over 1 million tech questions and answers.

Asylum port 81.How to check which application is running on a port

Q: Asylum port 81.How to check which application is running on a port

Hi,

I run the Vulnerability scanner yesterday GFILanGuard Network Security Scanner and it shows that on port 81 there is a backdoor Asylum. But I do not know how to see which application is actually using that port. I have used the TCP view but it did not show any kind of application running on port 81, at the same time when i tenet the port 81 I observed that its responding and there is some activity going on that port

I have used another tool named Advance Admin tool and it shows the information as follows:

Port Protocol Description Possible Trojan

81 TCP HOST2 Name Server RemoConChubo
Can you please help me how I can be sure what is actually going on this port. I mean the exact application which is listening on this port.

RELEVANCY SCORE 200
Preferred Solution: Asylum port 81.How to check which application is running on a port

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Asylum port 81.How to check which application is running on a port

You may want to try Port Explorer, it will identify which program is using the port:

http://www.diamondcs.com.au/portexplorer/

Read other 1 answers
RELEVANCY SCORE 84.4

I contacted Lenovo support today and got NO help in answering my question on this T470 Thinkpad. Is the T470 able to support two external monitors at the same time (one) using the HDMI port, (one) using the USB-c port (connected VIA an HDMI adapter lets say) to two 32" LGMA68HY-P 60HZ ISP LED's ( max res 1920 x 1080) that ARENOT 4K displays!!  Man it was like pulling teeth, upside down, in the dark, getting astraight answer from tech support on the issue. It looks like my Pro Dock will be useless in this application. As soon as I plugged in a VGA monitor the HDMI port died. HELP!!

Read other answers
RELEVANCY SCORE 80.4

Hello all. I was talking on skype and lost internet connectivity while talking. I received the error above (Firewall Settings HTTP (port 80) HTTPS port 443 FTP port 21 error message). I am running a laptop with windows XP and IE 7 and my antivirus is AVG and I also have Ad-Aware.

I'm not much of a computer person but I did some research online and tried a few things: I turned off the option on skype's advanced settings for it to listen on Port 80 and then rebooted. I also ran a command, 'netstat -aon' and did not find a listing of 1270.0.1:80/443 or 0.0.0.0.80/443 which seems to imply that nothing should be affecting port 80 or 443.

I also downloaded firefox and it cannot access the internet either. The only way I'm able to access the internet at the hotel I'm located at was to call the hotel's tech support and they had me go into the LAN settings of internet options and manually select port 8080.

Any more suggestions would be greatly appreciated!

Thanks,

Mike

A:Firewall Settings HTTP (port 80) HTTPS port 443 FTP port 21 error message

Some info on common ports used, http://www.chaminade.org/MIS/Articles/Fire...ortSecurity.htmI don't know much about connectivity problems...but it seems to me that...if you never had this problem before and your system connects properly outside of this hotel...the hotel/location may be the problem.Worth a read, IMO: http://en.kioskea.net/forum/affich-37752-c...on-the-internetLouis

Read other 4 answers
RELEVANCY SCORE 80.4

I am a beginner really and got this message after eliminating (hopefully) a prgram called Antivirus Action from my computer. I can't get on the internet because I keep getting this message. Any help would be greatly appreciated!
Mike
 

A:Firewall Settings HTTP (port 80) HTTPS port 443 FTP port 21 error message

Open Internet Explorer. Click Tools > Internet Options > Connections > Lan settings > Proxy server > Advanced. Delete the proxy server settings under HTTP, HTTPS (secure) and FTP (and Socks, if any). Then, under Proxy server, uncheck all boxed.

If running Firefox too, disable proxy server.
 

Read other 3 answers
RELEVANCY SCORE 80.4

I have suddenly gotten this on my main computer. (Windows XP)
A previous techguy thread (expired) said to check my dns numbers with "jpconfig /all"
However, my computer will not allow me to run that program in safe mode.
Is it a bug issue... or will that program only run in full mode?
 

A:Firewall Settings HTTP (port 80) HTTPS port 443 FTP port 21 error message

Dear mulebit,
It actually is " ipconfig /all " i.e replace" j"with "i".Please go to command prompt under Start--> Programs-->accessories. No need for "safe mode" to carry out this task. Can you kindly provide details of your computer specifications? Are you using a third party firewall and if so which brand? What security software are you running?
 

Read other 3 answers
RELEVANCY SCORE 80.4

Hi

Please help i cannot connect to internet explorer!

I am getting the error message

Check the Firewall settings for HTTP port 80, HTTPs port 443 and FTP port 21.

My provider is tiscali and i have done the trouble shooting with them to no avail, Also tried to disable the Norton firewall functions and still didnt connect. My broadband connection is showing excellent between the router and pc with both wireless or with the lead.

I have Spybot and Ad-aware on my computer and norton internet security 2006.

Do i have to clear the Firewall settings for these ports or can anyone help me .... please!

Thanks a million

Angela
 

A:Firewall Settings HTTP (port 80) HTTPS port 443 FTP port 21 error message

Read other 6 answers
RELEVANCY SCORE 78

Hi,

I saw this problem listed, but My issue is a bit different and the previous solution didn't work for me.

Please forgive me if any of my posts offend, as I am new to this site. I don't intend to be rude, but my ignorace may anger some. Also forgive the length of the post, I wish to be thorough as to avoid getting possible solutions that I have already tried or are not relavent.

I recently had some repairs done on my computer which involved reformatting my hard drive and when I got it back started having trouble accessing some internet sites. Unlike the previous person's post with this issue i can still access the internet and 95% of sites, but a select (and seemingly random) few give the IE cannot access website error. When I run the networking Diagnostics for Windows XP get the following error:

Check the Firewall settings for the HTTP Port (80), HTTPS port (443), and FTP port (21)

The only firewalls I know of on my computer are Windows and my router (both of which I have disabled) i have also tried Firefox and it craps out at the same exact sites.

In addition to selected sites, some third party programs are having trouble accessing the internet. This includes Nortons Installer (I haven't been able to install my antivirus yet because of this error) and I haven't been abble to register Microsoft office after I installed because it cannot access the internet for ID Key Verification.

I have tried turning off all LAN proxy settings, and power ... Read more

A:Firewall settings for the HTTP Port (80), HTTPS port (443), and FTP port (21)

Read other 8 answers
RELEVANCY SCORE 78

Well, this has me baffled. My Bell Internet Security Services Activation (I just installed it on a computer not used for some 4 or 5 months) popped up a window saying "Waiting for Internet connection"...and waiting and waiting. But my Netgear wireless connection to the router in the house indicates "very good" signal strength, which I thought meant I was connected. Obviously not!

I tried opening IE. "Internet Explorer cannot display the web page" (much as I expected)

Clicked the button which was showing on the IE cannot connect page "Diagnose connection problems" and followed the instructions. The final diagnostic is "Windows cannot connect to the internet using HTTP, HTTPS or FTP. This is probably caused by firewall settings on this computer. Check the firewall settings for the ports HTTP...etc." Where on this earth are they?!

I checked the Windows Firewall settings and found it "off (not recommended)" so I switched it on.

I re-ran the diagnostic on the IE page and nothing has changed.

My question is:

How do I check the settings for HTTP port (80) and HTTPS port (443) and FTP port (21)? Also what do I set them to?

Many thanks, in advance, for a solution to my problem!
 

A:Solved: Help! Settings for HTTP port (80), HTTPS port (443), FTP port (21)

So you just installed an Internet Security Suite which has a Firewall built-in and then you enabled XP' built-in firewall? I am baffled as to why you would do that. The new software you installed has to be blocking it somehow. I would search their website for known issues.
http://www.securityservices.sympatico.ca/ssp.do?lang=en

Or just uninstall it and use something different.
 

Read other 3 answers
RELEVANCY SCORE 69.2

I M TRYING TO CONNECT MY NOKIA 6600 TO MY WINXP SP2 VIA INFRARED CONNECTION..WHENEVER IM TRYING TO CHECK THE INFRARED CHECK BOX I GET THIS ERROR MSG..

"IT S NOT POSSIBBLE TO USE THIS PORT AS ITS USED BY ANOTHER APPLICATION"

HOW TO REACH THE PORTS SETTING IN MY MACHINE SO TO SET A DIFFERENT PORT FOR IR CONNECTIONS TO STOP THIS CONFLICT??!!!!!!!

PLEAAAAAAAAAAAAASE...HELP...

I TRIED INSTALLING AND UNISTALLING MY PC SUITE SEVERAL TIMES ....DIDN'T WORK...
ANY SUGGESTIONS FOR A TORTURED MOM??!!!!
 

A:My Infrared Port Is Used By Another Application..help Please!!

Please stay with one thread per issue. Continue here: http://forums.techguy.org/hardware/525586-infrared-serial-port-used-another.html
 

Read other 1 answers
RELEVANCY SCORE 68.4

i used to connect my 66oo mobile normally to my pc a week ago"through infrared connection".....now unfortunately when i try to do so my pc suite tells me that it is not possible to enable this port as its used by another application..i concluded that there is some application conflicts going on but i can't solve that ...i m not an expert and can even loctae the place from where i can change ..enable...disable ports...ANY HELP PLEASE...I GOOGLED THIS ISSUE BUT REACHED NO WHERE...
THANKS
 

A:infrared serial port is used by another application

Read other 16 answers
RELEVANCY SCORE 68.4

Here is my situation,
I own a Lattitude E7450, and needed to connected two displays to it. I went ahead and bought the Dell E-Port Plus Advanced Port Replicator with USB 3.0, since it has 2 DVI ports on the back. It shows it is compatible with my laptop.
I set up my dock, connected my laptop, as well as both external monitors. Only one monitor shows a duplicated desktop. When I go into the display settings, I cannot see any existence of another external display being connected.
All of my drivers are up to date, restarted laptop many times. Pretty bummed out.
Anyone have any solution/knowledge to this?

Read other answers
RELEVANCY SCORE 68

Hello! I am trying to forward a port so i can connect to my computer because i want to stream a radio station from computer to my phone.

I'm trying to forward port 88 on my Linksys WRT54G Version 6

I tried that but Boardwave audio streaming server still says it's not open!

Here are some pictures:

I'm using Windows XP Professional 32-Bit
Eset AntiVirus
and using Windows firewall
What am i doing wrong?
Thank you for your help!

Windows firewall screenie:

 

A:Solved: Port forwarding issues, Cannot forward port Please help! Linksys WRT54G

Read other 9 answers
RELEVANCY SCORE 68

1. I would like to change my COM 1 TO COM 3.
Can this be done in the CMOS? or is there a simplier yet effective way that it can be done?

I need your help as soon as possible.

[Edited by Jsimon on 08-16-2001 at 12:13 PM]
 

A:How Do I change Com.port 1 to Com.port 3? My modem is silent. Dual booting problem

What do you mean by changing COM1 to COM3? Do you want to move a device? Reassign IRQs? Physically pick one up off the motherboard and move it?

Your modem sound is usually configured in two places. One is in the Control Panel, and the other is in the Dial-up Networking settings. Adjust the volume there.

Are you running Windows 2000 and Windows 98 on separate paritions (drive letters)? If so, you'll need to use special software to convert the FAT32 file system to NTFS. I believe Parition Magic will allow this without data loss. However, I would never make such a large system change without first backing up data. There is always the chance that everything could get wiped out.
 

Read other 1 answers
RELEVANCY SCORE 68

Internet Service Personal Router Static IP MAC address of LAN Port or WAN Port

Hello friends,

I have purchased static IP from Local ISP Provider . Problem is that the tech support of local ISP provider is asking em

Which Port would you like to bind your Static IP

Also they ask me whats the MAC Address of Router
Pls see attached screenshot
As you can see Internet port - 74:44:01:94:E0:79
Whereas LAN Port has mac address - 74:44:01:94:E0:78

Which is routers mac address?

I have no idea.

I know we have two ports in router (mine is Netgear 300N Model)
1. WAN (Internet) Port
2. LAN Port
Could anyone really help in explaining me
1. Which one is routers mac address
2. Static ip should be binded to LAN or WAN Port

Pls guide Thank You

P.S. I intend to use DVR for CCTV for remote viewing later
 

A:Internet Service – Personal Router – Static IP – MAC address of LAN Port or WAN Port

I Don't know what your talking about directly but I'm willing to try. Can you explain a little better what the isp person is asking you? From the screenshot I know the bottom section is your local connection and the top part is your WAN connection. If that helps any.
 

Read other 2 answers
RELEVANCY SCORE 68

Has anyone had any issues with the Precision 7510 only outputting through one DisplayPort output on the E-Port Plus Advanced Port Replicator?Our organization recently started to introduce Precision 7510 units to our employees, and we're finding that they will only output to one single monitor connected via DisplayPort through the E-Port Plus Advanced Port Replicators - even though there are two monitors connected into the two DisplayPort outputs on the E-Port Plus APR. If the monitors are connected via DVI, the Precision 7510 is able to output to both of them through the E-Port Plus APR. We have tried Precision M4800, Latitude E7450, and Latitude E7470 units in these E-Port Plus APR's with two monitors connected into the two DisplayPort outputs - and they all work correctly.The Precision 7510 units have the NVIDIA Quadro M1000M video cards, and the E-Port Plus APR's are connected to either a pair of P2417 monitors or a pair of U2414 monitors.

Read other answers
RELEVANCY SCORE 68

Need some advice a quick as possible.

Windows XP Pro
ofc had a built in serial port go bad, it was hooked to a charicter generator (don't no how to spell charicter) for a tv channel.
Installed a Controller Card with two serail ports PCI Multi I/O Controller Card, it didn't show up in the device manager was having problems getting the driver to work. says to load driver first then put in the pci card. Anyway it wouldn't work. The port that was built in (that went bad was on com 1) When the new card didn't work I used a usb with a serial adaptor and it went in fine and showed up in the divice manager and it said it was working and it started out on com 3, I no each time you plug the adaptor into a different usb port it goes to a different com port. That isn't a problem cause it would stay in the same port. Anyway device manager said it was working we changed the charicter generator to com 3 but it wouldn't work. We no the cables are good. I then got a PCI Card with one serial port instead of two and installed it and it show right up in the device manager and said it was working and I for get what comport it was on but changed it to com 1. that port didn't work either. Finally brought in another windows xp computer and hooked everhthing to it and it works. The xp computer I brought in had no serial port so used the same usb to serial adaptor that we had used and it work the first time. Show up in the device manager just like on the first comp... Read more

Read other answers
RELEVANCY SCORE 68

I recently started using the E-Port Plus Advanced Port Replicator with my Latitude E7450, but the headphones are not working. Sound comes from the laptop itself, even when the headphones are plugged into the dock or laptop. The headphones work with other devices, and the laptop works with the headphones when it is not docked.

Read other answers
RELEVANCY SCORE 68

Hello guys,

I am being more concerned since few days about daily suspicious network traffic in my network about the below.

Looks like UDP port 137 from my private IP contacting destination port 137 to a public IPs (one source to many public destinations). I investigated these traffic by taking into consideration about 50 + offenses and 80% scan results on these PCs didn't find anything suspicious. Rest 30% detected some PUP programs from registry and some adwares, which I believe are not that much suspicious. (Scanned by Malwarebytes and Super anti spyware)

Below is a syslog log I am posting for your reference captured by my SIEM tool sent by Firewall.

<164>%ASA-4-106023: Deny udp src Internal:172.28.169.167/137 dst External:114.80.174.240/137 by access-group "My_CSM_FW_ACL" [0xb292c4f, 0x412e8e2f]

This traffic is happening on a daily basis, and to avoid security issues we have to unnecessarily scan those machines. But is this really a suspicious traffic ? Could someone please help me on this, please. After a brief investigation, if I find something good, I can save a lot of waste work by colleagues sitting abroad scanning the machines.
 

A:Source Port UDP 137(Private) Destination Port UDP 137 (Public). Malware ?

Read other 9 answers
RELEVANCY SCORE 68

As mentioned in the title I have both pieces of hardware.  I also just purchased a third Dell U2414H LCD monitor.  I am trying to connect all 3 via display port.  However it seems that all I can do is 2 monitors?  When I try to daisychain them I got 2 monitors mirroring each other and one through HDMI off the laptop.

Is this a physical limitation of the replicator?  Is there a firmware update somewhere?

A:Dell Latitude E6520 & E-Port Plus 2 - Display port issue

The E6520 comes with Intel HD Graphics 3000.  The specs for that GPU are buried in the specs for the CPU itself, but if you go to ark.intel.com and look up your CPU, then scroll down to the graphics section and verify that it shows Intel HD Graphics 3000, you'll find that that GPU only supports 2 independent displays, which is why you see mirroring.  More recent Intel GPUs do indeed support 3 displays, but no Intel GPUs to my knowledge yet support 4.
If your E6520 has the NVIDIA discrete GPU, I can't find any information on NVIDIA's site about maximum number of supported displays, but based on your experience I would assume it's 2 unless indicated otherwise.

Read other 1 answers
RELEVANCY SCORE 68

My laptop had headphones plugged in because I was watching a film, but while I was in another room, my laptop was knocked onto the floor (around 1.5-2 ft drop) landing on the headphones jack, the wire is fine, but the ports completely broken, I can see cracks and its loose and everything

The laptop has Realtek HD audio manager, and in my experience of this program on other desktops I've had, I was able to change what port does what.

My laptop only has a headphones port and a mic port, and I would like to see if I can switch the mic port to be the headphones port because I never use an external mic, however in Realteks audio manager I can't find out how to do this. In pictures I've seen on the internet there is a "Device Advanced Settings" button (as seen in this picture http://www.vistax64.com/attachments...ealtek-hd-audio-driver-version-hd_manager.jpg) but my program doesn't have this.

Do I need to download a newer version of the software? or is it just not possible to change my mic port to be my headphone port? I dont mind if I have to use third party software, I just want it to tide me over till I can get it sent away.

Thanks for suggestions, greatly appretiated
 

A:Realtek HD audio manager, change a mic port to a headphones port?

I doubt very much if this will be possible. The mic and headphone ports are wired directly to the Audio section of the motherboard, there connections cannot be altered.

Your best bet is to get the damaged port repaired.
 

Read other 13 answers
RELEVANCY SCORE 68

hi,

Recently i've noticed that port 50 000 is blocked, and bitcomet says it is blocked from using this for listening. Port 50 000 used to be open, and i even forwarded it to my router.

Currently i have no firewalls running, not even the windows firewall. I also have no anti-virus running. I've checked the port forwarding settings on my routers admin page and they appear correct. Does anyone have any ideas how i could unblock this port? Thanks. I am running windows xp home.
 

A:can't unblock port 50000 - needed as listen port for bitcomet

You may not get a whole lot of help here. Please read the TSG rules for the reason.
 

Read other 2 answers
RELEVANCY SCORE 68

CDMA software requires a COM port to communicate with a cell phone. I'm using HW Virtual Serial Port v3.1.2 (single port, standalone install).

I have a separate modem and router. My Win8.1 PC is hardwired to the modem. Windows firewall is off. Windows Defender is off. Motorola Mobile Drivers Installation 5.9.0 is installed (directly from Moto's website for my phone although Win8 is not listed just Win7. I did not install in Win7 compatibility mode.). My Motorola Droid Razr HD is running stock 4.1.1 ROM. It is booted into BP Tools. WiFi is off. USB Debugging is on. It's connected as MTP (media device). Stay awake is on. Modem, PC, & phone have been rebooted. There are no errors in Device Manager for the Motorola USB Networking Driver.

In IP config, the IPv4 address for the Motorola USB Networking Driver is 192.168.137.1. In HW Virtual Serial Port under Settings tab, I unchecked NVT Enabled. On the Virtual Serial Port tab, I selected Port Name=COM10, IP Address=192.168.137.2, and Port=11008. When I select Create COM, COM10 is created and I can see it in Device Manager but I get a LAN status error (in HW Virtual Serial Port app). So something is not right. In Network & Sharing Center, I see it's an unidentified public network with no internet access (IPv4).

I'm at a loss on how to fix this. Anyone know what I'm missing? Thank you in advance for the help.

Read other answers
RELEVANCY SCORE 68

Hey Guys,

I have been messing around with Apache from (XAMPP) on my Windows computer. I know that it is not secure, but I am just testing it for right now (for fun).

I am behind a Linksys WRT54g router. I can easily access the apache server from internally (locally), and in order for me to be able to access it externally (external IP in address bar), I have to port forward in my router.

So, I port forwarded port 80 and everything worked fine. I just had a question about this.

Since most internet (HTTP) traffic is served through 80, and I just port forwarded 80 to one computer, how do the other computers on my network still have access to the net. Don't get me wrong, it's awesome that this works, but I would just like to know how. Theoretically, wouldn't all the traffic that is coming through 80 be routed to that one computer?

Can someone explain this to me?

Also, when people use Apache to host sites, do they usually keep the apache ServerName (in httpd.conf) at localhost, or do they change it to a different IP? I would imagine they would keep it at localhost, so what would be the reason for changing that to a different IP?

Thanks!
 

A:Question about port forwarding port 80 (for apache) and a couple other questions

Anyone have any ideas? Thanks.
 

Read other 1 answers
RELEVANCY SCORE 68

I have dual monitors......my primary display monitor is a Chimei CMV223D
My secondary display monitor is an Acer AL1916W.

My graphics card is an HD ATI Radeon 5800.

PROBLEM:

My primary display monitor which usually has a display resolution of 1680x1050 is currently stuck on 640x480 and in the property settings it won't let me change the resolution. The cable running from the Graphics card is an HDMI cable with a HDMI/DVI converter. I have also tried using the DVI port of the video card to the DVI port of the PC which comes up with same problem. Using a DVI/VGA converter and a VGA cable the VGA port on the monitor works fine!!! SOOOO long story short there is definitely something going on with the monitors DVI port.........

This randomly occurred overnight and is driving me insane to know what I need to fix. I have used different cables and to no such luck. My secondary monitor is just humming away just fine! But I really need my primary display.

I've uninstalled and reinstalled video drivers for the graphics card which is the Catalyst control centre suite and all monitor drivers appear to be up to date.

WHY oh why is my monitor locked at this resolution!!??? How to fix please help!!!

A:DVI port on monitor is stuck res of 640x480 VGA port works fine

Never mind!!!!

SOLVED CHECK THIS!!!!!

Force DVI/HDMI resolutions and refresh rates

Read other 1 answers
RELEVANCY SCORE 68

So I'm not exactly sure what information I need to share to resolve this issue or know how to fix it. I've been trying to open this port (7198), and no matter what I try it just won't open. I'm not exactly sure how to explain the problem, but the title pretty much says all. If there's any information I need to share please tell me.

Windows 7 Ultimate x64
ISP is CenturyLink
Screenshot by Lightshot
Screenshot by Lightshot

A:I port-forwarded, enabled DMZ, disabled firewall, and port is closed

Welcome to the forum. You covered the ip in the second shot are you using local lan or wan are you trying from outside the lan as you can connect while connected to local lan

Read other 1 answers
RELEVANCY SCORE 68

I'm doing terabytes of data transferring for months on end, and I was wondering if new hardware allows you to use multiple connections between hardware to transfer data to portable backup disks quicker.

Think Azure with a 5GB fiber line to RAID mirroring bay with only a USB3.0 and an ESATA port (dual banding) on the bay.

Read other answers
RELEVANCY SCORE 68

i have a router/modem, Thomson ST536 and a router, Netgear WNR 1000. i have a static ip address already and port forward for both router with instructions from portforward.com. yet, when i check if the ports are open using simple port forwarding, only the tcp port is opened. the udp port remains closes. is there something else i must do to open the udp port?
 

A:problem with port forwarding. tcp port gets opened but udp remains closed.

bumpz
 

Read other 1 answers
RELEVANCY SCORE 67.6

Hello,

I'm posting this is networking because I suspect this can be resolved via a router configuration, but I really have absolutely no idea at this point how to solve my issue.

I'm running several game and file servers via a dynamic IP, which I unfortunately cannot change to a static connection for several reasons. I've solved this by using No-IP, which is a Dynamic IP resolution service. This solved the first part of my problem - I can give people IP's for their websites, such as myfreemusic.sytes.net and so forth, but they all HAVE to append their ports to the url - i.e.

site1.sytes.net:90
site2.sytes.net:91

My main problem right now is the game servers - I'm hosting games that default host to 25565, and though I can change the ports the server hosts from, I must give those who want to connect the ports at the end of their urls, i.e.

server1.sytes.net:25566
server2.sytes.net:25567

I know DNS is essentially agnostic when it comes to ports, so no solution there. And I don't think the game (Minecraft vis-a-vis bukkit) supports SRV records, and even if they did, I'd have no idea how to configure them. How can I resolve static urls redirecting to a dynamic IP by pointing them to ports?

To simplify the question -

How can I make server1.sytes.net resolve to port 25566, and server2.sytes.net resolve to port 25567 when the default port is set to 25565?

Thanks,

Kristopher
 

A:Port redirect with default ports on application?

Bumping for any help that can be offered.
 

Read other 1 answers
RELEVANCY SCORE 67.6

Hi,

Could anyone tell me which of the many languages I should/could use to develop a browser based application meant to support database functions (store/retreival to local disk of user inputs) and that could read and send data off the host PC serial port. I'm not looking for client/server stuff, just a plain browser based application running on a local machine for accessing its local serial port and sending/storing data to or from it. I could do it using WinAPI or MFC but I would prefer to have the familiar web based application instead.

I'm not familiar with ASP.NET, PHP, XML, SQL etc... so I wonder if any of them could dot the job ??

Thanks in advance.
 

Read other answers
RELEVANCY SCORE 67.6

Dear Sir,
we are using IP range from 172.16.1.1 to 172.16.31.250 on our LAN network. I want to check which port open on which ip address?. kindly give me procedure how to check open port on active/inactive IP address?

A:How to check open port on LAN

Try this web page sir:

Open Port Check Tool

or maybe better yet this free tool:

http://www.radmin.com/products/previ...ortscanner.php

Hope this helps,

Seth

Read other 2 answers
RELEVANCY SCORE 67.6

Hi. I read that port 80 is used to listen to http request. May I know how to check what port number is used to listen to what service on a computer?

thank you.

A:check port number

Yes, go to http://www.micaspecialties.org/computerports and check out the information. All of the 1,024 common ports are listed!James

Read other 2 answers
RELEVANCY SCORE 67.6

I do not want to check the speed on a USB 3.0 flash drive or external drive. I need to know the speed of the port itself is transferring at full 3.0 capacity.

What I have is an external mechanical USB 3.0 hard drive. I know it's a 7200 rpm drive. My 3.0 USB ports on my laptop are not using the blue USB plastic to denote 3.0 speeds, they use black plastic.

Therefore I am not confidant they are running at full 3.0 speeds. I want a tool that will measure the port speeds independently of any drive or device on the USB port.

I did find this but I do not have any Advanced tab to check for or to reset the device to Super






There are four USB specs: 1.0, 1.1, 2.0, and 3.0. But to confuse things, each USB spec has more than one data rate assigned to it. Those rates are "low", "full", "high", and "super."
Therefore, benchmarking data throughput solely on speed is not necessarily conclusive as to what the actual spec being used. Thus, a USB 3.0 port may not be actually running at a "super" rating but at a "High" rating instead.
On a Windows machine, check the data rating of the USB root/hub - Goto: Device Manager --> USB Controllers --> USB Root Hub (Right Click) --> Properties --> Advanced (Tab).
It should tell you the data rating for the USB hub/port. Once you know that, you'll know the maximum throughput from the computer's POV.
Low = 1.5 Mbps Full = 12 Mbps High = 480... Read more

A:How do i check the speed on my USB port itself?

As my understanding, whether it's a usb 2.0/3.0 usb stick or 2.0/3.0 usb port the speeds are predefined and the same. It's the actual connection type and not the device itself.
USB 1.1 = 12 Mbit/sFirefire 400 = 400 Mbit/sUSB 2.0 = 480 Mbit/sFireWire 800 = 800 Mbit/sUSB 3.0 = 5 Gbit/seSATA = Up to 6 Gbit/s right now as it depend on the internal SATA chip.

Read other 7 answers
RELEVANCY SCORE 67.6

I am trying to do a build-it-yourself website with one of the on-line services. I am supposed to have ports 8087 & 8088 open to access my control panel. Evidently they are not open for my desktop,which runs Windows 98 because I cannot access the control panel. However, I can access the control panel on my laptop which runs Mac OS 10. Both computers are wireless tunning through a Linksys wireless router. How do I check to see if my ports are open and how do I open them if they aare closed.
 

A:How to check a port to see if it is open?

Read other 6 answers
RELEVANCY SCORE 67.6

I am experiencing a problem hot synching my PDA via the USB port. I am beginning to wonder if I have a hardware problem. Before I run down to the computer store, is there a way to check the USB port to see if it is "alive"? The only connection I have is the hot sync, but I am pretty sure I read somewhere, sometime about a way to check the port via Windows software (using ME).

Can anyone help?
Charles Lewis
 

A:How can I check to see if the USB port is dead?

Read other 13 answers
RELEVANCY SCORE 67.6

Hi All

I would like to know if there is a way I can test if a specific port is open on an IP address and if my PC can connect to that port?
How do you do this from Command Prompt? 'telnet iport' does not seem to work since it just says 'telnet' is not recognized as an internal or external command.

I do not want to use a website to do this, since they will test if they can make a connection from their servers to the ip port in question, not if the port between my IP address and the ip in question is open.

I know about NMAP and Netcat, but don't know how that works.

What is the best way to do this in windows?

Thanks

A:Check if port on IP is open in CMD?

Type netstat -? into command prompt. It will list all the options, choose the one you want.

Type "netstat -a" in the Command Prompt window, and press "Enter." The computer displays a list of all open TCP and UDP ports.

Look for any port number that displays the word "LISTENING" under the "State" column.


If you need to ping through a port to a specific IP use telnet.

http://www.ehow.com/how_8297516_ping-port.html

Read other 4 answers
RELEVANCY SCORE 67.6

Hi All

I would like to know if there is a way I can test if a specific port is open on an IP address and if my PC can connect to that port?
How do you do this from Command Prompt? 'telnet iport' does not seem to work since it just says 'telnet' is not recognized as an internal or external command.

I do not want to use a website to do this, since they will test if they can make a connection from their servers to the ip port in question, not if the port between my IP address and the ip in question is open.

I know about NMAP and Netcat, but don't know how that works.

What is the best way to do this in windows?

Thanks
 

A:Check if port is open from CMD

Read other 10 answers
RELEVANCY SCORE 67.6

I have a number of external USB Disks connected to my laptop. "Suddenly" one of the disks has slowed down radically!

I have tested the disk and it looks like it's ok, except for the speed.
The disk is: WD Ext HDD 1021 (2 TB)

My laptop is a Dell Vostra 1720 and have 5 USB ports. I was thinking that some of the port may only be USB 1.x, which would explain the lack of speed.

But how do I check this?

I attach a screen dump of Device Manager (NB! it's in Swedish)

//Anders

A:how to check which USB port is v2 resp v1?

Make sure you are using a High-Speed USB 2.0 cable.

Read other 4 answers
RELEVANCY SCORE 67.6

Is it possible that when I ping SMPT server is working but ISP is blocking the used port.

If so, how to check if IP through certain Port is reachable in windows 7?
 

A:how to check that is port is not blocked

Many ISP's will block port 25. They don't want their home customers running rogue smtp servers.
You can use GRC's Shields UP to see if it can reach port 25.
 

Read other 3 answers
RELEVANCY SCORE 67.6

Hello,
I have trouble as described in the topic,
I have two most old laptop models, Dell Precision M6300 & Dell Latitude D630.
When laptops is docked to replicator potr dock stations D/APR (PR01X) or D/DOCK (PD01X) - bigger one model with DVD port,

headphone jack port not working under Windows 10 Pro x64 installed on both laptops.

On M6300 previously was installed Windows 7 Ultimate and on D630 was Windows 8.1.
On Dell  M6300 on Win 7 Ult. headphone jack port worked properly.
On Dell D630 on Win 8.1 I'm not sure due I do not used this on it (more years ago when it was on Win XP headphone jack port worked properly)
So when Ms start delivering updates do Win 10, I did it on doth laptops, everything on both models working fine, but only this headphone jack port in D/APR (PR01X) or D/DOCK (PD01X) wouldn't like to work when I'm dockind Dell M6300 (D630 I docked only
for test if on this one jack port will work or not) but not working too like on M6300.
So loks like drivers whih was made oryginally for Win Vista x64 ale which was workable for Windows 7 64b wouldn't like to work on Windows 10.
Maybe You have some tips what to do with this to press them to work?

Greets
PitPuma

Read other answers
RELEVANCY SCORE 67.2

I'm looking for two drivers, and have run into a bit os a wall on the Lenovo driver website. - PCI Simple Communicator Port- PCI Serial Port Computer: Thinkcenter M58 8910 ARU.   Windows 7, 64 bit. I dropped a new hard drive and a PCI card into this machine, and everything looks good except that the PCI card is not recognized.  I see similar posts here, but none with solutions that work for my exact situation.  I'm not a tech guru, just a semi-educated user.  8^)  Any help is greatly appreciated! Thanks,Bob 













Solved!

Go to Solution.

A:PCI Simple Communicator Port and PCI Serial Port drivers for M58

I have the same problem with M58P and Windows 8.1_x64.- http://support.lenovo.com/br/pt/products/desktops-and-all-in-ones/thinkcentre-m-series-desktops/thin...On page no information about the PCI Serial Port driver.Any suggestion?

Read other 4 answers
RELEVANCY SCORE 67.2

Sir i have dell gx620 desktop optiplex whenever i use to LPT or COM port for programming purpose its shown an error that  I/O SYSTEM SERVICE IS PRESENT BUT THE DRIVER CANNOT BE CONNECTED TO please solve my problem thanks in advance

Read other answers
RELEVANCY SCORE 67.2

Hi,

I have been using an DSL Siemens speedstream 6520 router at home. I usually carry out some R&D by placing servers behind the router. I access the services on each of the servers from the ouside using port forwarding and it has been working fine for http, ftp, RDP, any user defined ports etc but in the case of port 25 SMTP its not working at all. I have checked the port on the local lan and I am able to telnet to that server but from the outside only on this port 25 I am not able to telnet. But If i were to change the SMTP port number from 25 to any other port like 24 or 26, I am able to telnet from the outide. Is there any way i can make SMTP port 25 to work and access the same from the outside.

Regards
Rajesh
 

A:SpeedStream 6520 DSL Router - Port forwarding for port 25

Is it possible that port 25 has been blocked by your ISP? This is a pretty common thing for ISP's to do as a SPAM prevention measure.

As you can see, there are quite a few ISP's blocking port 25 on this list.
 

Read other 1 answers
RELEVANCY SCORE 67.2

1. Is this a wired or wireless connection issue?
wireless
2. Who is your Internet Service Provider (ISP)?
Charter

3. What type of Broadband connection are you using?
Cable

4. What is the exact Make and Model of your Modem, Router or Modem/Router Combo
Netgear WNDR3800, Cisco DPC3008

5. What is the Name of the Anti-Virus, Security or Firewall Software
comodo firewall

A:router not passing port scan after opening port

Have you tried a different port to see if that port is being blocked by your ISP?

I also see that your parsing TCP to UDP, probably doesn't make a difference to the port being open or closed but it might be better to set them both the same or set to Any.

Another problem you may encounter is your IP may change, most ISP's like to change your IP every so often so you may have to set up a DDNS with a hostname in order to access the services you want remotely.

Read other 9 answers
RELEVANCY SCORE 67.2

Hi 
I have Dell 6430s and I have 2 port USB on Laptop. USB port behind work ok (detect, power and connect), but on the right side looks is corrupt by Dell/Windows software- detect plug, give power to connected device, but i cant use this device - mouse, pendrive or anything else.
Windows 7 64 bits Home premium
DELL 6430s
USB SOFT: intel extensible host controller 1.0.0.194

I install/unistall all drivers from DELL Site, and any changes all devides connected by side USB as unknown devices.

Read other answers
RELEVANCY SCORE 67.2

Hello, I am an IT Technician for an electric cooperative. I am having a very odd issue that I can not seem to resolve and I am in need of assistance.

We have 4 Dell Latitude notebooks all running XP and we also have some very high end GPS units made by Trimble that we are going to be using to stake out points on a map. Whenever I connection through bluetooth with the GPS I am able to pair but the GPS control software never recognizes it when I chose the COM port assigned to it. Whenever I connect it directly through a cable(serial to usb) it never detects it either.

However this is the odd part, when I test this on my desktop I am able to connect just fine with the exact same method.

Any ideas?

A:[SOLVED] COM port and bluetooth COM port connection issues

Are you aware of any differences in your Desktop and the laptops? Like Service Pack is different, or maybe a BIOS setting?

Jeff

Read other 7 answers
RELEVANCY SCORE 67.2

so i opened my port 25565 (or so i thought) went to test to see if its open on multiple sites and....all of them say its closed.

A:router not passing port scan after opening port

Start the application you opened the port for and then test the port, it should report it as opened.

Read other 31 answers