Over 1 million tech questions and answers.

Tecra notebook - Right Alt F4 key

Q: Tecra notebook - Right Alt F4 key

This is my first post so apologies for any mistakes they are unintentional. Now does anyone know of a method that can use the right alt f4 key to be functional instead of shutting the computer down.

It is a requirement of a game.
Thank you

RELEVANCY SCORE 200
Preferred Solution: Tecra notebook - Right Alt F4 key

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Tecra notebook - Right Alt F4 key

As far as I know ALT+F4 closes the applications but it cannot be used for notebook shutdown.
FN+F4 activate hibernation mode and notebook will be “shut down”.

Read other 1 answers
RELEVANCY SCORE 52.8

Hello, what kind of device do I need in order to connect an old Tecra 8000 hard drive to a notebook from an other manufacture?

I just want to transfer some data but the ac connector on the Tecra no longer works.

A:Tecra 8000 - How to connect HDD to an other notebook?

Hi!

You can use an external HDD case with USB port for this.
The external HDD case should be for 2.5? HDD?s and with IDE interface. That?s all.

Contact your local computer dealer. I?m sure they will have such cases.

Bye

Read other 1 answers
RELEVANCY SCORE 52.4

I extend my Tecra laptop to an external monitor and has worked fine until a couple of days ago where the monitor screen has suddenly started showing a red tint on the screen whereas my laptop screen has a normal colour on it.

I have tried 2 different monitors and 2 different VGA cables so it must be a problem with the display settings or hardware in the laptop. Anyone have an idea of why this is happening?

A:Tecra notebook - Red tint on extended monitor

It is not easy to give you some concrete answer to your question. In my opinion this should be checked by Toshiba service provider.

I don't know which Tecra do you have and which video-out ports it has but if there is also HDMI port available try to test it with your TV.

Read other 2 answers
RELEVANCY SCORE 52.4

High all
Can anyone tell me how to tell what the model I have? I am trying to download the drivers for my machine but am not sure what series / model it is.

I have the following information on the base of the machine:

TOSIBA Tecra 8200
Model No: PT820E-05WQT-E
Serial No: 61276516G ST820-0

It is a Pentium 3 machine but is it an: A / M / R / S series? Then what model do I select after that please?

Thanks.

A:Tecra 8200 - Which notebook Model number do I have?

Your Tecra is simply Tecra 8200 and there is no other model number.
Drivers you can find on Toshiba download page under http://eu.computers.toshiba-europe.com > Support & Downloads but under Product type you must choose option ARCHIVE.

Then you will find option for Tecra 8200.

Good luck!

Read other 3 answers
RELEVANCY SCORE 52

Hello,

My laptop was slow. So I used hijackthis and found few suspicious entries. I deleted them. One of them was thotkey. Now my function keys are not working. So FN + F1 to FN + F12 is not working. I have Tecra A series with XP 32-bit OS. From where can I download this utility again?

Regards,
Vilas

A:I've deleted ThotKey using a third-party tool on my Tecra notebook

Generally speaking all drivers, tools and utilities you can download from Toshiba download page - http://www.toshiba.eu/innovation/download_drivers_bios.jsp

Problem is that with WXP you must install several tools and utilities to get full FN functionality.
Check it out but if you need some help or assistance let us know and please post exact notebook model.

Read other 5 answers
RELEVANCY SCORE 52

My TECRA-S11-166 is faulty.

I need a new Notebook with *Express-Card-Slot* and (if its possible) RS232.
What kind of Notebook comes with a Express-Card-Slot ?

A:Defective Tecra S11 - Need new notebook with Express-Card-Slot

Hi

There are different Toshiba notebooks on the market and Toshiba releases new models in very short intervals.
I would recommend you to visit the Toshiba notebook product page and to compare the available series and models.
The Tecra laptops offer a business professional use and Portege series are very best in mobile computing.
The Satellite series are entertainment machines designed to provide exceptional all-round performance.


http://www.toshiba.eu/laptops/

Read other 1 answers
RELEVANCY SCORE 52

Hello, I am new to TecSpot. I only have notebooks and this one has no sound. How should I trouble shoot this.
Thanks for your help
Leo
 

A:Toshiba Tecra S1 Notebook has no sound, Software or Hardware??

Hello and welcome to Techspot.

Check in your device manager. see if there are any yellow exclamation, or question marks. Make sure the volume isn`t muted.

Go to the Toshiba website, and download the sound drivers for your computer.

Install them, and see what happens.

Regards Howard :wave: :wave:
 

Read other 3 answers
RELEVANCY SCORE 41.6

I possess a tecra A10 complete with Windows Vista Business installed (and backed up to an image file using Easeus Todo backup


However I also have access to a Tecra M10 which came with no operating system, although the COA sticker (product key) is likewise for a windows Vista Business.


My question is: would my Windows Vista Business back up from the A10 work on the M10 (ie would it load onto the M10 hard drive and then work properly

If anyone can advise on this matter I would be appreciative please

Best wishes
Ian

A:Can I use Tecra A10 OS disk to install OS on Tecra M10?

At first I must say that Toshiba recovery image is created for each notebook model separately and it is 100% created to work on specific model. Why?
Every notebook model has different hardware platform and all drivers, tools and utilities for certain model are part of recovery image. These recovery images are also tested.

Generally speaking if both models have identical hardware platform (hardware parts) it can be used.

Read other 4 answers
RELEVANCY SCORE 40

Today at CES, Samsung announced the Samsung Notebook 7 Spin (2018) and showed the Notebook 9 and Notebook 9 Pen ? new devices powered by Windows 10 that provide you with the tools you need to remain productive in today?s digital world.

Let?s take a look:

Samsung Notebook 7 Spin (2018)
The Notebook 7 Spin (2018) arrives with the Windows 10 Fall Creators Update to offer modern features that light up touch, inking, 3D, including a 360-degree touchscreen that enables digital drawing, writing and note taking with Windows Ink; an Active Pen (sold separately) for quick and easy note-taking; as well as the power and performance for more efficient multi-tasking.

Other features include:
A 360-Degree Rotating Touchscreen ? Provides the flexibility to view content as preferred, whether it be as a tablet or as a traditional PC in landscape mode
Active Pen-enabled (sold separately)? Perfect for attending meetings, conference calls or lectures, the Active Pen lets you create a sketch or jot down notes on the fly with Windows Ink
Secure Fingerprint Log-in ? Through simple fingerprint scanning, you can quickly log-in with Windows Hello and keep files secure in your own Privacy Folder
Power and Performance ? Powered by Windows 10 and equipped with an Intel i5 processor and 256GB SSD drive that allows for quicker startups and advanced multi-tasking capabilities
Voice Note ? Advanced smart recording featuring an integrated far field microphone to capture every det... Read more

Read other answers
RELEVANCY SCORE 38.4

Dear forum
The above says it all really.

I see the two look similar, but one is smaller. Are these two models different in other ways please.
Ian

A:Difference between Tecra A10 and Tecra M10

Of course the both notebooks are different.
There are different Tecra A10 models and there are different Tecra M10 units.

For example:
Tecra *A10-13B* supports an Intel Core 2 Duo P8400 2,26 GHz CPU and Intel GM45 chipset.

Tecra *A10-1D2* supports an Intel Core 2 Duo T9600 2.80Ghz CPU and Intel GM45 chipset

You can find details about different discontinued notebook models here:
http://www.toshiba.eu/discontinued-products/
Then you can compare all the hardware parts.

Read other 7 answers
RELEVANCY SCORE 34.4

A problem has recently developed with my Envy notebook.   About 2 weeks ago my entire wireless network began slowing down when on it.   Noticeable on all devices.    When my provider came out, checked and tweaked some issues it appeared to be ok.   I went on with my daughers HP laptop and was drawing 20-24 mbps all over the house. When I reconnected mine to the system I was only pulling 6, 3, 5, up and down.   It doesn't start right away but after a few minutes.   So I put my duaghers right next ot mine and low and behold, when I ran her's it pulled 3 - 6 also.   So I turned my wi-fi off and hers' popped right back up.   I have also tried this with an old XP mini, my i-pads etc.   As soon as mine gets on the network the speed crashes.    This also happens with no one else home and no other devies conncted. I have downloaded the latest up to date Intel driver for this network adapter and it hasn't changed anything. Any ideas?

A:ENVY Notebook - m7-k111dx w/intel 7260 - notebook sucks dow...

Bill_Ving Hello;Allow me to welcome you to the HP forums!I read your post about wireless networking poor performance and wanted to help. My immediate guess is that you might have mixed-mode networking going on.  This happens when you have two different PCs networking in two different modes -- one using "G", the other using "N".  The wireless router (or access point) can optimize performance for either mode, but not for both.  So, the "G" mode drags down the performance of the "N" mode PC, but even worse, with the router set for mixed modes, it performs more slowly than with either PC connected by itself.Here are some other troubleshooting steps you can try: HP PCs - Troubleshooting Wireless Network and Internet (Windows 8) | HP® Customer SupportGood Luck========================================================================I am a volunteer and I do not work for, nor do I represent, HP.---------------------------------------------------------------Please click "Accept As Solution" on the post that solves your issue to help others find the solution.Please click the Thumbs-Up symbol on the left of the Reply button to say thanks fopr my help.========================================================================

Read other 1 answers
RELEVANCY SCORE 34

The hinge on my much-loved Notebook has become 'loose'. Can I find repair help locally? Baltimore,  MD area. What is the correct term(s) to use to describe the problem? 

A:TouchSmart Notebook TV notebook swivel hinge repair?

https://www.google.co.in/webhp?sourceid=chrome-instant&ion=1&espv=2&ie=UTF-8#q=hp%20service%20center... You can tell them that the hinges are loose 




Regards;SmileyI am an HP employeePlease click the White Kudos star to say thanks for helping.Please mark Accept As Solution if my help has solved your problem.

Read other 1 answers
RELEVANCY SCORE 34

I made a Google notebook to keep the minutes of a meeting my business partners and I held last weekend. I made them all collaborators on the notebook so they could all make any changes or annotations they felt necessary. However, when they go to access this notebook they are prompted for a password.

There is nowhere (at least that I can find) to even choose to password protect the notebook let alone change the password. I'm pretty confused as to what password the notebook could be. The only thing I can think of is that it's asking for the password to my gmail account, which I don't really want to be handing out. Any ideas on this one gang?

Stink
 

A:Why do Google notebook collaborators need a password to access the notebook?

Read other 6 answers
RELEVANCY SCORE 34

Hi, I would like to use HP Spectre 13 x360-w001nc with docking stationi-tec USB C Flathttps://www.i-tec.cz/?t=3&v=437 to use in combination with 4k TV LCD and therefore I dont wont to have my HP SPECTRE WITH OPEN LID,but in a case I switch the notebook off, and the notebook is connected to i-tec usb c flat docking stationthe notebook power button on the side doesnt work  then, so I cannot switch the power on , until I open the lid of thehp spectre. (it work only when the comp is in sleeping mode - the button blink) Please help me where can I change this func to be able to push the power button on the hp spectre on , regardlessthe lid is open or closed. Is there any soft to change the setting so I will be able to see everythink on the second monitor (TV LCD ) and the hp spectre lid will be black ? not on also ? somethink like automatic change monitor (not both) or it is not possible and the hp spectre lid will be always on  regardless I use another extrernal lcd ? Thanks for help and tips      

Read other answers
RELEVANCY SCORE 33.2

We've got a desktop hooked into a linksys B router, and a notebook that accesses the internet wirelessly thru that router. lately we havent been able to get a decent connection with the notebook, and if we've gotten any at all, it gets dropped soon. is the desktop getting the majority of the bandwidth, which is eliminating the notebook from getting enough? if so, is there anyway to limit the amount that the desktop is getting?
 

A:Two computers, desktop and notebook, notebook not getting int. connection

What changed from when it was working to now?
 

Read other 2 answers
RELEVANCY SCORE 33.2

My own notebook (Asus EEE PC S101), running Windows XP service pack 3) was twice redirected to an unknown website when I wanted to visit the Guardian newspaper website. I was using IE version 8. Then the notebook froze. When this happened, I had to switch it off without using Cleanup, which I have used safely for a long time. When I had switched it on again, I used Firefox to go to the Techsupport Forum. I followed the instructions to download dds.scr and began running it. Then the notebook froze again. It still tells me "Two logs shall be created on your desktop" Now the cursor does not move any more either. I write this from another notebook, but I cannot create a logfile,m as everything is frozen on my own notebook. Help, please,

Bienh

A:Malware freezes Notebook (posting from other notebook)

Hi and Welcome!!

My name is Jeff. I would be more than happy to take a look at your malware results logs and help you with solving any malware problems you might have. Logs can take a while to research, so please be patient and know that I am working hard to get you a clean and functional system back in your hands. I'd be grateful if you would note the following:
The fixes are specific to your problem and should only be used for the issues on this machine.
It's often worth reading through these instructions and printing them for ease of reference.
If you don't know or understand something, please don't hesitate to say or ask!! It's better to be sure and safe than sorry.
Please reply to this thread. Do not start a new topic.
If you happen to have a flash drive/thumb drive please have that ready in the event that we need to use it.
Please be sure to subscribe to the topic if you have not already done so.
IMPORTANT NOTE : Please do not delete, download or install anything unless instructed to do so.
DO NOT use any TOOLS such as Combofix or HijackThis fixes without supervision. Doing so could make your system inoperable and could require a full reinstall of your operating system and losing all your programs and data.

Having said that.... Let's get going!!
----------

Are you able to boot to Safe Mode at all? If you are, try to run DDS from there and when the logs are made please post them.

Read other 6 answers
RELEVANCY SCORE 33.2

My wife has a two-year-old Samsung notebook. Recently when she unplugged it the machine cut off, even though the battery said 79% charged (it wouldn't charge any further). I figured that the battery was bad so I bought another one from Amazon.

This one charges to 100% percent and does exactly the same thing. I'm perplexed but think there's something going on with the motherboard that won't let it use battery juice, even if Windows 8.1 says it's 100% charged.

I've tried the hold the power button down for 1 min with the battery out trick to no avail.

Any ideas? I'm stumped and think I might need to get her another notebook.

Thanks, Robert
 

A:Samsung Notebook Battery Won't Power Notebook

Read other 8 answers
RELEVANCY SCORE 33.2

New here and so I hope that I am posting in the correct place.
My new notebook an M50-MX5 was in the warranty depot as we thought it had a dvd burning problem, however that was not the case; it was the media.

Anyway before it was sent into the toshiba warranty depot the level 2 tech phone support said to get the computer to be like it was when I unboxed it 2 days earlier, this was last month.
And so to my frustration all of my programs were removed, however before doing this the software techie at the office Ghosted it to my Western Digital Storage Unit and then sent it off to the Warranty Depot.

While it was in the shop I used my 3 yr old toshiba satellite 2410 which I am now typing on at this moment.
I was finally able to get the software tech from the office to reGhost my new toshiba M50 on this past Saturday and left it with him for a couple of hrs and then returned to pick it up as there was not much in the way of programs on it and so it wouldn't take long to Ghost the Images back.

Well, in my Western Digital Storage unit are Ghosts of this 3 year old satellite that I am presently using.
After the techie got my Restore Disk installed and tried to reGhost the image onto the New M50, it crashed.

He was using the wrong Ghost, he was using the one that was from this unit???
I was not happy, especially after he claimed that he now had it Ghosted with the proper Image and I tried it out and it was very sloooooow to Boot. He said it was my Norton 2006.
I... Read more

A:new notebook Ghosted with old notebook ghost and now problems??

Something you might want to try (it's a pita) is a repair of windows - this may fix some of the slowness issues you're seeing. The install program he's talking about is probably the U3 component of many larger USB pen drives. I think it's on most of Sandisk's newer large drives. A repair of windows might also take care of this. I seriously doubt that putting the wrong image on the machine and then putting another image on could do any damage to the machine itself - the folks here at my job do it all the time.
 

Read other 3 answers
RELEVANCY SCORE 30.8

Hello,

do you know, if it possible to install a SSD Driver for my notebook?
And if yes, which manufacturer/brand you would recommand?
I want to install Win7 Prof - Anything to take care of? Drivers, firmware, BIOS Version etc...?

Thanks for tips in advance.

kind regards

Peter

A:Can I use SSD for Tecra A8

Generally speaking it should not be a big problem to use an SSD instead of an common HDD.
The notebook supports the SATA interface and you have to use an 2.5? SATA SSD drive.
I cannot recommend any specific brand but in some very rare cases it could be possible that you will need to update the SSD firmware providing by an SSD manufacturer?

Read other 2 answers
RELEVANCY SCORE 30.8

hi, it is possible to have a functionnaly laptop upgrade with win10
TECRA S11-162 PTSE3E
or it is definitively dead ...

it is easy and no time eating for upgrade windows ?

thanks

Read other answers
RELEVANCY SCORE 30.8

Hi,

I'm trying one of this popular caddy's that allows me to put a second hard drive in the optical slot bay, I use a Sata to Sata adapter, so there is not really an adapter besides connecting properly:

[http://www.akasa.co.uk/update.php?tpl=product/product.detail.tpl&no=181&type=Enclosures&type_sub =2.5%20Enclosure&model=AK-OA2SSA-BK]

My problem is with Toshiba BIOS that is expecting a ODD device in that Sata port and cames out with a "CD-ROM error", disabling the Sata port.

I have a workaround, if I start the PC, after BIOS post with anything in ODD bay, after starting Windows, I insert the second HDD in the ODD bay, go to "Windows Device Manager" do a "Check for hardware changes" and voil?, the second HDD is working fine, to me this proves a BIOS limitation.

Is there any help, a Beta BIOS or something else, I have the last BIOS 3.00 for this machine installed.

A:Tecra M10-17U use second HDD in the ODD bay

Please check this thread:
http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=39412

It seems that Tecra M10 does not support an select bay which would allow you to use an 2nd HDD instead of ODD.
As far as I know select bay is supported on Tecra M1, M2, M3, M4, M5, S1, S2

Read other 7 answers
RELEVANCY SCORE 30.4

Hi,

I have recently bought a Tecra M7 off a friend who had neglected it. It has been lying around for over a year with a broken power port. As a result of this he has lost all the discs and the pen!

I have upgraded the ram and have a 120 gig HDD that I would like to put in it but as I do not have any of the discs this is going to cause me a problem.
I have downloaded all the drivers I need from the toshiba website but am in need of the OS.

Is there any way for me to get the XP tablet edition 2005 which is already on it without having to pay a rediculous amount for a brand new copy?
Is it possible to transfer winows from 1 HDD to another? Also does anyone no where I can get 1 of the pens from?
I have looked about on the internet and can't seem to find any!

Any help would be greatly appreciated!

Jay

A:Tecra M7: Where to get Win XP Edit?

Hi mate

I?m not quite sure if you will be able to order such disk for this notebook.
In some cases this is not possible if the notebook series has been discontinued.
But check this page:
http://backupmedia.toshiba.eu/landing.aspx

Usually you could order the recovery disks there.
But if it?s not possible, then you will need to install the Windows using an Microsoft disk!
The necessary drivers could be found on the Toshiba European driver page:
http://eu.computers.toshiba-europe.com/

Note: you have to choose Archive in the driver download form in order to find the Tecra M7 series.

>Also does anyone no where I can get 1 of the pens from?
I think all parts could be ordered from local Toshiba ASP

Greets

Read other 1 answers
RELEVANCY SCORE 30.4

Got a Tecra M1 refusing to power up since few days.

The M1 has 3 led to indicate: (a) the AC power is connected (b) the power is on (c) the battery is available / charging.
Each of these can be green or amber.


The symptoms are the following:
- with AC adapter and batteries plugged, (a) and (c) are green
- when powering the laptop, the leb (b) is turing green for a fraction of a second; then start blinking amber with more or less 1 second frequency. Got a intermediate beep on speaker with the same frequency.
- display is bank. Not even bios is displayed.

I tried already the following:
1) remove AC and battery, wait a while, plug both and restart. Same issue
2) remove battery, boot on AC. Same issue.
3) remove AC, boot on battery. Same issue.

Any idea ?
Does anyone know the meaning of having this "power-o" led blinking amber.
Thanks.

A:Tecra M1 does not power up

Hi buddy,

> remove AC and battery, wait a while, plug both and restart. Same issue
Good job because this was described [HERE|http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=21]

Unfortunatley that?s everything what you can do if your notebook doesn?t start. At the moment it looks like a serious hardware malfunction and the mainboard or CPU could be affected.

I would recommend contacting an authorized service provider in your country. The guys can make an exact diagnostic and tell you how much a repair would cost.

Good luck! :)

Read other 2 answers
RELEVANCY SCORE 30.4

I wonder whether anyone might be able to answer a question for me.

I have a nice Tecra R10-11B and it has been very good for quite a few years. It runs Win XP and does everything asked of it without a problem.

What I would like to find out, though, is whether it is possible to fit a quicker CPU. I have a suspicion that the installed cpu may be permanently fixed and is not replaceable but I would like to find out.

I had played with the idea of replacing the Intel P9400 Core Duo with something a bit new, to allow perhaps installing Win 7 and more memory. There is 3gb of ram installed.

Any suggestions would be appreciated.

parkman

A:CPU upgrade on Tecra R10

The CPU is socked and this means that the CPU is removable.
But the important fact is that notebook manufacturers don?t support CPU upgrade.
One of the main reasons is the BIOS which is mostly modified by notebook manufacturers.

But let?s start with some basic knowledge:
The CPU has to be supported by chipset and BIOS.

So let?s check what CPU would be supported by Mobile Intel GS45 Express Chipset which is part of the Tecra R10-11B
Here on this Intel Ark page you can find compatible CPUs
http://ark.intel.com/products/35505/Intel-82GS45-Graphics-and-Memory-Controller-Hub#@compatibility

But even if the chipset would support new CPU, some compatibility problems may appear because of the BIOS.
However, the Intel Core 2 Duo CPUs ( Montevina Penryn) were equipped in different R10 models, so probably other Intel Core 2 Duo CPUs would be supported.

By the way: the RAM could be upgraded up to 4GB RAM

Read other 2 answers
RELEVANCY SCORE 30.4

Hallo!

I saw in a Youtube Video, that the SSDs that come as standard are mSATA ones and that there's space for a 2.5'' drive beneath.

So my question is: If I buy a Toshiba Tecra Z50-A-12R, which comes with a 500GB HDD, can I install an additional mSATA SSD as my system drive and use the 500GB HDD as a second drive?

Thanks
Martin

A:Tecra Z50 - mSATA SDD + 2.5'' HDD?

Well, some models are are equipped with an mSATA Solid State Drive (SSD) instead of a
hard disk drive. The computer seems to supports a 128GB, 256GB and 512GB SSD drives?

but as far as I know there is only one SATA controller in order to connect SSD or an HDD.
The mSATA SSD drive is connected to the controller using mSATA HOLDER ASSY.

So such holder assy is needed if you want to use an mSATA SSD drive.
Of course, you don?t need it if you use common 2.5? SSD drive or 2.5? HDD

Read other 5 answers
RELEVANCY SCORE 30.4

Hello,

I own a Tecra A8-133 (PTA83E-0E403MBT ).
To give a kick to my aging laptop I bought a corsair neutron GTX SSD. Unfortunately, after
many attempts, and some corsair support, it seems the SSD is not compatible with that TECRA.

I'm ready to buy a new one, but, obviously I want to be 100% sure the SSD is compatible this time.

How can I find a list of compatible devices for this laptop ?

As a SATA 1 laptop, I know the performance will be restrained, but I don't care too much.

Any help would be appreciated.


Thank you

A:Compatible SSD for Tecra A8-133

Hi

What?s wrong exactly?

I found some specification of the mentioned SSD drive from Corsair and it looks like the SSD drive is designed to support the latest high-speed standard SATA III (6Gb/s).
But it?s seems to be fully backward compatible with SATA II and SATA I. So it should be compatible?

From my knowledge there are no any special info regarding the SDD dive compatibility.
In some cases the SSD drive manufacturers provides an SSD drive firmware updates and sometimes such update helps to sort out some issues.

Read other 5 answers
RELEVANCY SCORE 30.4

Hi guys,

i have an old TECRA M10-139 with a Core 2 DUO T9400 @ 2.53GHz and i want to upgrade the CPU to a Core 2 DUO extreme QX9300.
I think the sockets are the same but i am not sure if the BIOS and the other specific hardware of the notebook can handle this processor.

Thanks in advance

Read other answers
RELEVANCY SCORE 30.4

I want to purchase Toshiba Tecra Z40-A1402 - 14" - Core i7 4600U
This item has 128 gb SSD on it. Is it possible to install a regular hdd on this ultrabook?
Anyone has an idea?

A:HDD upgrade on Tecra Z40

Hi

Is this the right specification for Tecra you want to buy?
As I can see it has 500GB SATA HDD inside.

Read other 6 answers
RELEVANCY SCORE 30.4

I need to (re)format my laptop, I have a Tecra M11-103 with Windows 7 pro 64bit. I received it with only an WXP downgrade CD but no Windows 7 installation CD.

Laptop no longer under warranty. How do I reformat? It seems like I used to have a nero backup software as it came bundled with laptop a long time (and a format under warranty) ago...

Is it possible to get nero again?
Thanks
E

A:How to reinstall my Tecra M11-103?

Hi

According notebook specification your Tecra was delivered with preinstalled WIN7 64BIT PROFESSIONAL and you got additional WXP DVD. Original Win7 recovery image was saved on HDD and using preinstalled Toshiba recovery media creator you have had possibility to back-up recovery image and create bootable recovery installation disc.
How it works is described in user?s manuals document.

I don?t know if you have created this disc but now after WXP installation you need this recovery disc. Of course, if you want to have ?factory settings?, you need this disc. Other way, you can obtain Microsoft installation disc and install Win7. All necessary drivers, tools and utilities you can find and download from Toshiba download page.

I hope you understand the situation but if you have more questions you are welcome.

Read other 1 answers
RELEVANCY SCORE 30.4

Hello,
i want't to upgrade my internl msate SSD 256 GB with a SATA SSD 960GB.

I think i need a new SATA cable. But i don#t find any Part Number of this cable

regards Frank

Read other answers
RELEVANCY SCORE 30.4

Hey all,

I have a Tecra S11 which was updraded to Win 10. I want to revert it to out of the box state, with new HDD.
I managed to make a recovery USB flash with the Toshiba software (it was the only option, no DVD option).
Now when I boot from the USB and select the recovery wizard, it asks to insert the recovery media 1.

Do I have a solution to recover it using the USB flash?

Thanks in advance for your help!

Florin

Read other answers
RELEVANCY SCORE 30.4

Hi,

how can I boot from CD/DVD is the OS is not working an I can't access the Toshiba Hardware Setup tool in Windows?
If I press F1 I can only change Date and Time but no boot order.
Is there a special key to boot from CD/DVD?

Thanks
Baumi

Read other answers
RELEVANCY SCORE 30.4

Hi,

I try desperately to update the bios of my old Toshiba A4-161.
I think not, because when I want to download the necessities bios, he asks me if I have an ATI graphics card and the other if it is a bios intel.

So I do not know which to choose.

Can you help me.

Here is my information from Driver Genius.


Summary
--------------------------------------
Computer brand: Toshiba Tecra A4
Operating System: Microsoft Windows XP Professional Build 2600
Service Pack: Service Pack 3
Processor: Intel Pentium M 740 (1733.3 MHz)
Motherboard: TOSHIBA Portable PC (Intel 915PM (Alviso-PM) + ICH6-M)
Memory: 512 MBytes (single-channel)
Hard Drive: WDC WD600VE-00HDT0 (57.231 MBytes (60 GB))
Optical drive: MAT****A DVD-RAM UJ-831S (DVD + R DL)
Video Adapter: ATI Mobility Radeon X300 [Toshiba]
Audio Adapter: Intel 82801FB ICH6 - AC'97 Audio Controller [B2]
Network Adapter: Marvell Yukon 88E8053 PCI-E Gigabit Ethernet Adapter
************************************************** **************Intel PRO / Wireless 2200BG Network Adapter (Toshiba mPCI 3B - MoW)
Battery: PA3399U-1BAS/BRS
--------------------------------------
Processor
--------------------------------------
Processor ID: 000006D8
Codename: Dothan
Stepping CPU: C0
Platform CPU: mPGA479M (Micro-FCPGA/FCBGA)
Revision of the microcode update: 20
Heart (s): 1
Thread (s): 1
Initial Frequency: 1733.3 MHz
Current frequency: 798.0 MHz = 6.00 x 133.0 [email protected] V
Temperature of heart processor: N / A... Read more

A:Which BIOS to use with Tecra A4-161?

You can find latest BIOS version on http://www.toshiba.eu/innovation/download_bios.jsp
Choose archive option to get listed all old models. There you can find Tecra A4. Please choose right short model number.

I don?t know which one has your A4. It can be PTA40E or PTA42E.

Read other 1 answers
RELEVANCY SCORE 30.4

For the graphics card on Tecra S1, is the mother board attached to it so that it cannot be seperated? If so, how much would it cost to replace the board? Thanks for the help~
 

A:Question about Tecra S1

About $75 to $150, used. Much more new. Better to buy a better laptop. Or lurk on eBay until you see the right package.
 

Read other 4 answers
RELEVANCY SCORE 30.4

Hi!

I'm in a bit of a dilemma. The current Tecra Z50 is extremely close to what I want in a notebook but the thing is, I currently don't really need it and I don't have the time to set it up. So I would buy one and have it lying around until late summer.

If I get one now and there's a new model out in summer, which I like even better, I would be very disappointed but on the other hand if I want to buy one in the summer and there's a new one with less connectors, a glossy screen with one of those extremely high resolutions or maybe without the pointing stick, it would be even worse!

So the question is: What can I expect from the Tecra Z50 in the future? I know that I probably won't get the information I need but I still had to post this.

Thanks!

A:The future of the Tecra Z50?

Future of Tecra Z50?
From my experience, Toshiba releases different notebook series within short spaces of time.
In most cases this applies to the ?everyday home? models like Satellite models.

The product life cycle of notebooks belonging to business segment like for example Tecra or Portege series is much longer? so from my point of few the Tecra Z50 should be available in the next couple of month.

But even if new models would be released, I think that older models should be still provided by some online dealers?

Read other 3 answers
RELEVANCY SCORE 30.4

Dear forum members

The above laptop turns on but does not boot. The power light flashes amber twice and then green.

Please does anyone know what might be be issue in this case.

Please does anyone know if this particular light flash sequence indicates anything in particular.
Any help would be greatly appreciated
With thanks
Ian

A:Tecra A10-16D does not boot

Does the same happen when you remove battery and start notebook with AC power supply only?

Read other 4 answers
RELEVANCY SCORE 30.4

We bought a Crucial M550 256GB disk and want to replace in a Toshiba Tecra Z50-Av1

We do not want to make any transfer of data or cloned.
We want to do a clean install with Windows 8.1
The BIOS recognizes the SSD

But when you install Windows 8.1 does not detect any disk connected to the unit and requested additional drivers. Windows not detect drive

https://www.dropbox.com/s/mlvk6v3lxzi1rrh/2014-05-04%2009.47.18.jpg
https://www.dropbox.com/s/fr2eo5l9xonaoln/2014-05-04%2009.48.59.jpg
https://www.dropbox.com/s/8usxog8wm06funr/2014-05-04%2010.06.09.jpg

i too test with lasted version of this driver (old F6 in boot to locate hdd driver)

https://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=23496&lang=eng&wapk w=f6flpy-x64.zip

and with toshiba package
http://support.toshiba.com/support/viewContentDetail?contentId=4004211
you can see than i have 3.20 version of BIOS. interestingly I see that the last one is the Toshiba has released version 3.1

But always the drive CRUCIAL is not reconized by the boot instalation of windows

The problem is similar with ubunto, kubuntu, .... the drive is detected with the BIOS but not for the OS.

any help?
Thanks

A:Tecra Z50-A-11V: New SSD but Win 8.1 does not detect it

Hi

Did you solve this issue?
Could you install the Windows 8.1 system on this SSD drive?

I think the additional driver installation while setup procedure isn?t necessary since Win 8.1 should already contain the essential drivers.
From my point of few there could be an compatibility issue (maybe SSD firmware update would solve this).

How about the usage of other SSD drives? Do you have the same problem using other SSD drives from other manufactures?

Feedback would be appreciated.

Read other 1 answers
RELEVANCY SCORE 30.4

Hi,

In my laptop model Tecra A8 # PTA83L-02K014, current HDD is Fujitsu 60 GB SATA (mode# MHV2060BH).
I want to upgrade it to 320GB/500GB.

Please suggest a replacement HDD.
I cannot figure out which HDD I should buy.

Regards,
kannit

A:HDD upgrade for Tecra A8

This old Tecra was delivered with several HDDs (from 60 up to 120GB). God thing is that this Tecra uses SATA HDDs so; generally speaking HDD upgrade should not be problematic.

Which HDD can you use? In my opinion HDD with around 300GB should be enough for this old piece of hardware. Just buy SATA 2,5? HDD. Talk with your local dealer and buy high quality product.

HDD replacement is not complicated and you can do it alone. If you need some help you are welcome.

Read other 5 answers
RELEVANCY SCORE 30.4

Hi,

I would like do a multiboot XP / 98 on a TECRA A11.
Do you think it's possible.
Will I have some drivers dysfonction?

Thanks for answer !!

A:Tecra A11 - Win XP and Win 98 multiboot

Well, Win XP installation should not be a big problem because the Win XP drivers seem to be available on Toshiba European driver page.

But Win 98 might be a problem here since its not supported and the drivers are not available? you will need to search for such drivers at your hand and I think this might be a painful time? I doubt you will be able to get Win 98 drivers because this OS is really, really old.

I would recommend installing the Win 98 only using Virtual Machine (VM) http://en.wikipedia.org/wiki/Virtual_machine
or Virtual PC
http://en.wikipedia.org/wiki/Windows_Virtual_PC

This is very easy? running Win XP you can open virtual PC or VM and could start the Win 98

Read other 1 answers
RELEVANCY SCORE 30.4

I have Toshiba Tecra M7-132

I would like to improve everything possible

I want to increase the amount of RAM in my laptop but I do not know does my laptop can handle the memory faster than DDR2 533. I have Windows XP Tablet 32bit, I know it will handle only about 3.5 GB of RAM but it's better than 3 GB

I also want to change the hard drive. My current drive is HTS541080G9SA00 Hitachi, 80 GB, 5400 rpm SATA . Will it run with a bigger hard drive with speed 7200 rpm?

I installed all the most recent official drivers and BIOS

What else I can improve

A:How I can improve my Tecra M7?

Hello

According the specifications of Tecra M7-132 on Toshiba page it supports up to 4GB RAM but all 32bit OS support only up to 3.2GB RAM and for Windows XP 2GB is more than enough because it doesn?t need much RAM capacity.
The specification for RAM is DDR2-667.

Regarding the HDD: Larger HDDs are no problem because there is no capacity limit on SATA interface. That means you can also install 500GB HDD or larger. Only important is that you buy a 2.5? HDD with SATA interface.
Also 7200rpm shouldn?t be a problem but they creating more heat and need more battery power. Usually 5400rpm are enough and quieter.

Read other 7 answers
RELEVANCY SCORE 30.4

Hi. I've got a failing hard disk in my Tecra, the existing disk is a Fujitsu MHZ2120BH G1. In an ideal world I would swap this disk for a solid state but I'm wary having read of others' problems installing SSDs. Has anyone any experience of successfully (or otherwise!) of doing this. Alternatively, I'm quite content to stick with a HDD but I wonder whether I can increase the size of the disk from the existing 120Gb? I've got some vague memory of having read about a limit on the size this laptop will take. Thanks.

Read other answers
RELEVANCY SCORE 30.4

Hello at all,
I have some Problems with the sound of my Toshiba Tecra A10. I already installed the Realtek Audio Driver and I see the little Speaker symbol down on the right side,too.

But I hear nothing. The Device Manager has a yellow Question Mark on "Modem Device on High Definition Audio Bus".

I Installed the Agere Systems Modem, but nothing happened.

Can someone help me and give me a link for this Driver I need.
I use Windows XP.

Hardware Detail:

HDAUDIO\FUNC_02&VEN_11C1&DEV_1040&SUBSYS_11790001& REV_1002\4&9E9AEC4&0&0101

Regards,

A:Tecra A10 - No Sound using Win XP

> I use Windows XP.

Ok, I though similar issues with Win XP on other notebooks with new HD audio from Realtek.
The point is that you need SP2 and SP3!

The SP2 and SP3 provides important fixes and patches for HD audio?
So first of all uninstall the installed Realtek audio driver.
Then install the SP2 and SP3.
Then go to the device manager and delete the devices marked with yellow exclamation mark.
Then reboot the notebook.
Now Win XP should found a new audio device and should ask for the driver.
No you should install the sound driver from Realtek.
Reboot once again? and now the sound should works fine?

Read other 9 answers
RELEVANCY SCORE 30.4

My TECRA A7 has a 100GB HD and I wonder if I can replace it for a larger one.
Is it possible and what should I do?

Thanks for any help

A:HDD upgrade on Tecra A7

Hello

Your Tecra has SATA HDD connector so it should not be problematic to use HDD with higher capacity.
I don?t know which one you want to use but HDD between 200 and 300 GB should be good enough for upgrade.

What do you think about that?

Read other 1 answers
RELEVANCY SCORE 30.4

HI, was wondering if anyone has had a similar problem: on boot up the screen flashes red instead of black, with vertical lines (white thin ones) across the screen. When it finally boots with windows xp, there are horizontal lines across the screen with different shades of the colour. The cursor has a box of lines around it. I think it's a VGA card issue but am not sure; has anyone had similar problems? I have visited irisvista on the web, where there are some instructions on disassembly. I got to the connector to the LCD and repositioned it, and noticed that when I appllied pressure in this area I could get near normal display.... can anyone shed some light???
 

A:Tecra S1 LCD with lines across it

It sounds like there might be something wrong with the cable or cable connector. Can you try another cable?
 

Read other 1 answers
RELEVANCY SCORE 30.4

Hi, could someone help me find the right driver for the wireless/wifi driver on my Toshiba Tecra A3X.

Model No.PTA3XE-01C00PEN

SERIAL NO. 56042981H

I am using Windows XP.

Thanks.

A:Need Wi-Fi driver for my Tecra A3X

No problem.
Go to: http://www.toshiba.eu/innovation/download_drivers_bios.jsp

Choose:
-Archive
-Tecra
-Tecra A series
-Tecra A3X
-PTA3XE
-Win XP

Now you will get all drivers for this notebook model

Read other 2 answers
RELEVANCY SCORE 30.4

Have read many posts and tried what was suggested. I pulled the 2 memory modules and cleaned the contacts with an eraser. I inserted only one of the modules at a time, switching slots etc. and then powered it up each time. Once with only 1 module installed, I got the WINDOWS XP startup screen (with the moving bar below) and then the Toshiba Splash screen appeared and then the screen went blank again. Seems like the hard drive starts up and then stops. The DVD drive seems to respond with a low clicking sound. I hear a couple chirps/clicks from the hardware but no beeps whatsoever.

I'm guessing bad RAM. I will try with some new RAM later when I get some.

Since I did get the machine to sort of startup once, am I safe to assume the BIOS and Motherboard are okay ?

Thanks in advance for any suggestions.
 

A:Toshiba Tecra S1

I would say failing hard drive
 

Read other 4 answers