Over 1 million tech questions and answers.

Of course network issues

Q: Of course network issues

To start.... Just updated computer mobo to Asus crosshair formula z and now can't connect to internet....

1. Used CD that came with the new mobo to install drivers. Everything is good except two yellow "!" In the device manager. A. Teredo tunneling though I was able to fix that and B. Other device-unknown device, not fixed

2. Even the the internet connection icon in the bottom right of the screen says OK I still can't connect to anything. Trouble shooter doesn't work. Reinstalled drivers from CD.. Didn't work. Got drivers from Intel and didn't work. Tried ipconfig/renew in command prompt and say no files through c:windows/system32.

Network adapter is Intel 82583v gigabit Ethernet controller. Says all is well in the device manager.

OS is win 7 premium

Also I haven't tried safe mode yet but will when I get off work.

Also thinking of getting a cheap Ethernet card and see if I can fix it that way.

Trying to do all I can before reinstalling windows.

More options are appreciated.

Thanks for your time in advance.

RELEVANCY SCORE 200
Preferred Solution: Of course network issues

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: Of course network issues

How did you move to the new mainboard? Plugged in the old HDD/SSD or clean installed?

Read other 9 answers
RELEVANCY SCORE 42.4

Hello,

Around 2 days ago the connection to internet on my computer suddenly failed. First I thought it was a router/modem issue, but I soon discovered this wasn't the case. I checked the ethernet cable, it's light was green and so was the router's light. I plugged the cable into my xbox, it worked completely fine.

So I started searching for clues on my computer, and after a while found out that all my network adapters have a yellow exclamation mark, and error code 31. This includes my main adapter:

Intel Pro 100/VE Network Connection

And all of my:

WAN Miniports

Searching the internet, I found some answers but they didn't work:

-I tried rebooting my router, entire network and computer
-I tried ipconfig /renew, it said that there wasn't anything available on my computer to perform that command
-I tried updating the drivers for my network adapters, but they said all my drivers are up-to-date
-I tried uninstalling/reinstalling the driver software, but it wouldn't do this
-I tired disabling Ipv6, but it wouldn't do this.
-I cleaned my entire computer with a registry cleaner and a Hard drive cleaner, scanned for spyware, malware, viruses and trojans. Nothing detected.

Can anyone help me? I would really appreciate it.

A:Network Connectivity Issues / Network Adapter Issues

Hi and welcome to TSF please go to your computer makers support website for your model and update the driver from there, do not use the update driver feature in the device manager, or windows update as they do not always give you the most recent driver,if need be post the make and model of your computer here and someone will try to track down the driver

Read other 1 answers
RELEVANCY SCORE 40.4

I have two annoying issues with my new ThinkPad X1 Tablet (Model: 20JB001DGE, running Windows 10 Pro, Build: 1709; 16299.371): When trying to create a new folder on a network share on my Synology NAS I get the error message:If I click 'Try Again' the message remains. When 'Cancel' is clicked I got the new folder with the default name 'New Folder'.Sometimes this also happens when renaming a folder or file.The only way to get rid of it, is restarting the tablet.I have already been in contact with the Synology Support. They checked the NAS, which seems to be okay. This can be confirmed by using another Windows tablet with the same Win 10 build, which can access the NAS shares and create folder without any issues.I also contacted the Microsoft Support.They adviced me to disable all non-Windows services and all auto start items.I uninstalled my Antivirus and Firewall-Tool Avast Premier, using Windows Defender only now.We also tried out different SMB configurations. (activating SMB v1 only on both NAS an PC vs. SMB v2/3, which is the recommended and more secure configuration.)Nothing of this helped so far.The tablet is connected to the DVI port of a monitor via the USB 3 Ultra Dock.Every once in a while some items are displayed larger than normal or seem blurred, for example when opening windows explorer.This screenshot should illustrate the difference. On the left is the normal view, while the right one coincides with blurred view of windows explorer items or fonts in documen... Read more

Read other answers
RELEVANCY SCORE 40

I reformatted my computer because after installing service pack 1 and other updates from Feb 14th my computer has been having issues getting a dhcp from my router. I have a windows 7 home premium 32 bit laptop that works just fine. I also have a ubuntu machine that pulls an address from this router and an xbox 360. From what I've read other places online it appears this is a bug with dhcp that appears some time around windows 7 service pack 1 x64. Is this update the one causing issues with the dhcp problems I'm having? Should I uninstall service pack 1 or reformat and not let windows install this? I'm a little confused as to what this problem is. Any help would be greatly appreciated! Thanks!

A:Dhcp issues and network connectivity issues since windows 7 x64 sp1

I've never heard of a service pack creating a DHCP problem.

You might want to try resetting your router either by pushing in the reset button "hold in for ten seconds" or you can reset the router from the router's service page or unplug the router for ten minutes then plug it back in again.

Just because other machines can pick up the DHCP address doesn't mean it's working correctly for all machines. Routers can limp along sometimes but the functionality becomes erratic until you reset them.

Or you can try using the ipconfig commands, such as the ones outlined in the link below.
ipconfig - Windows Command Line Utility

Read other 1 answers
RELEVANCY SCORE 40

Hello all,
 
I've been experiencing some strange issues that lead me to believe I may have some sort of infection. Here are the symptom's I'm seeing:
 
Last night my network was having many, many network issues. I logged into my router and saw that my computer had 400 active connections. I was able to get it down by shutting down applications such as Chrome, Netflix, Spotify, Blizzard Battle.Net, instant messenger, Steam, and Origins. I ended up shutting my computer down and decided to look again in the morning.
With the issues going on, web site access was happening very intermittently.
When I got on my PC to see what the problem was I had a notice that the Origin client (EA game client) couldn't log on because it was logged on in another location. I've only got it installed on this computer.
After the PC was shut down I reset my router and modem and connection seemed to be going fine.
I woke up this morning and checked me email on my phone and found a message saying that my twitter password had been changed. I fired up my twitter app and was still able to connect. I went to twitter to try and force a log on and was able to connect with my old password. I looked through my feed an saw that my account had sent out about 20 spam messages in the middle of the night. I changed my password to be safe, but who knows if that'll do anything.
Anyway, I'm really worried something is going on. Can someone help me out?

Read other answers
RELEVANCY SCORE 40

Hello,
I have a Toshiba Satellite L305, running Vista SP1, that locks up and freezes at random time intervals from the time the computer connects to the internet.

I have run multiple virus scans using Malwarebytes Anti-Malware, in both Normal and Safe modes that have determined that the system is indeed clean of malware.

I believe the Network Adapters are the cause for the system freezing based on information found after running ipconfig /all. There are multiple Adapters that, based on internet searches, have something to do with the iP6 protocol.

Also, it is worth noting that there is an issue with the Device Manager. The Device Manager will not allow me to view Properties on any of the installed devices.
Subsequently, I can't uninstall the network devices for Windows to re-install to 'reset' the network settings.

* sigh*

Any help anyone would have would be greatly appreciated.

Read other answers
RELEVANCY SCORE 39.2

I am gravely in need of your help and assistance.

We have a problem with our logon and startup to our Windows 7 Enterprise system. We have more than 3000 Windows Desktops situated in roughly 20+ buildings around campus. Almost every computer on campus has the problem that I will be describing. I have spent over one month peering over etl files from Windows Performance Analyzer (A great product) and hundreds of thousands of event logs. I come to you today humbled that I could not figure this out.

The problem as simply put our logon times are extremely long. An average first time logon is roughly 2-10 minutes depending on the software installed. All computers are Windows 7, the oldest computers being 5 years old. Startup times on various computers range from good (1-2 minutes) to very bad (5-60). Our second time logons range from 30 seconds to 4 minutes.

We have a gigabit connection between each computer on the network. We have 5 domain controllers which also double as our DNS servers.

Initial testing led us to believe that this was a software problem. So I spent a few days testing machines only to find inconsistent results from the etl files from xperfview. Each subset of computers on campus had a different subset of software issues, none seeming to interfere with logon just startup.

So I started looking at our group policy and located some very interesting event IDís.

Group Policy 1129: The processing of Group Policy failed because of lack of network connectivity to a ... Read more

Read other answers
RELEVANCY SCORE 39.2

I've just had a new PC built for me, for the first time rather than build it myself I aid a local shop, and it's a pretty nice machine. They got windows up and running, when I got it back and lugged it in I don't even remember it asking about whether my network was home, work or public (I may be mistaken about that)

A lot of the networking is fine, by adding 'everyone' to the share, and joining the same homegroup as my laptop, I managed to get each to see their desktops, so I'm up and running with most of my workflow. But there's a couple of things not quite right about the network:

I've got a Xerox Phaser 60 network printer. It's got a simple 'walk-up' installer where you get the windows software into listening mode and then on the printer's menu initiate the connection. This doesn't find the printer. Even choosing the manual option of inputting the ip won't find it. So I've had to connect it with USB, not the end of the world, but shows that something's not right.

I have a lot of media on a dlna server in my home. Setting up kodi to find it, the SMB devices didn't show the host. Though, manually typing the IP in this case did find it. Lucky I knew the IP. Weird

And trying to FTP to my website fails too. It says "EAI_FAIL - Nonrecoverable failure in name resolution" Yet the same settings on my laptop (imported from the laptop) connects fine.

Surely there's something not quite right. Is there a way to reset all the network connection settings to default 'out of... Read more

A:New W7 64 install -network issues? Network printer, SMB share & others

OK, I just rethought it a little and added filezilla to the firewall exceptions list. Now t's working! I wonder if the same would fix the printer issue?

Read other 2 answers
RELEVANCY SCORE 38.4

Hi,
Can anyone help me with an issue I am having with my local network?
I connected a Western Digital 500GB USB 3.0 HDD to my Netgear N300 router via the USB readyshare connection so that everyone on the network can have access... BUT
While I can see and access the (readyshare) HDD from my laptop running win7, I cant see or access the (readyshare) HDD from my HTC Android phone or my WDTV Live Media Hub.
The WDTV is connected to the router via Ethernet and successfully connects to the internet, all other devices connect using wireless access. I have the latest firmware.
I performed a search the other day through google and it appears I may need to download an app for the phone to have access to the (readyshare) HDD... ?
I can connect the (readyshare) HDD directly to the WDTV, but it means swapping and changing everytime I want access from a different device.
I have been unable to locate any documentation from Netgear or Western Digital. I would love to smooth out the crinkles on this one as I have plans to upgrade the network storage and incorporate a new desktop into the network.
Any ideas??

A:Network connection issues - network storage

Hi gemini2010, how about using 'SkyDrive', I can access it from anywhere but the app is not installed on any of my computers.

Read other 2 answers
RELEVANCY SCORE 37.2

I have 3 machines on my home network. I just updated to a new router. Two of the machines work well and one of them has no internet access at boot. I need to disable the adapter and trouble shoot the connection before it magically functions again. I have not had any issues with this computer until now. I have moved the connection on the new router to another port and it made no difference. As I can fix the connection from WIN7, I believe that it is something wrong with the OS.

Dave

A:Network issues: no network at boot

Problems like this can almost always be solved by either updating the firmware on the router or finding a better more compatible network driver for the machine. I'd need more info on the router "brand and model number" and the machines specs to help you more with this problem.

Perhaps an ipconfig /all screen shot would get us started on this problem?

There is nothing "wrong" with the OP system, it just seems that way to the less informed.

Read other 3 answers
RELEVANCY SCORE 36

Hi All,
Problem is the Vista Machine connecting to the shared HPG85xi AIO on the network.
I am working on installing a Vista Home Premium Gateway PC on an existing network that consists of a 98 machine, two XP home PC's and an XP home laptop.
With the exception of the laptop, all PC's are connected via ethernet cabling to a Linksys WRT54G sharing cable internet access.
One of the XP home machines and the 98 are connected to a Dlink switch which is wired to the Linksys router. This XP home machine has the HP connected locally and shared.
All PC's have printer and file sharing enabled. All PC's are in the same workgroup, all PC's can see and share files bidirectionally. Including the Vista machine. All PC's with the exception of the Vista machine can connect and print to the HP.
When you try to connect the Vista to the HP, and it doesn't matter how (using Network and connect, using Printers to add a printer, using add a Printer to set up a new network printer and entering the path...whatever), the error message is "Access is Denied" before you can even install the drivers.
I used my IBM laptop running XP Pro to serve the HP via the USB connection (same as how the XP Home PC is doing it), the Vista can connect and print no problem; so it would seem there is an issue with the access rights in the XP Home PC sharing the HP.
I also tested the Vista PC on another network that runs XP Pro and it connected and printed with NO issues.
I trie... Read more

A:Solved: Vista Home Network Printer Issues, XP Home Network

Read other 16 answers
RELEVANCY SCORE 34.4

I am not able to connect to my local network. Someone pls help thanks!
 

Read other answers
RELEVANCY SCORE 34.4

Hi guys, sorry if this has already been asked and answered. Here is my problem.

This only started within the last week.

1st machine = (A)
2nd Machine = (B)

(B) can see (A) in Workgroups, but (B) cannot access (A).

(A) has full access to (B)

My Printer is shared through (A), and (B) could still print through (A) right up until I removed the shared drivers off (B). Then when I tried to find the shared printer on (A) it has the same access not granted error.

All firewalls are disabled and the only thing that has happen in the last week, on both machines, is an XP update. I don't want to do a reinstall, is there any way to fix this??
 

A:Network issues with XP

How are computers connected, hub, router, crossover??

Try run network wizard on both PCs. If they are without a DHCP server, make sure IP addresses are set correctly and both in same workgroup etc. You almost might have to disable netbios on one.

Sometimes the easiest way is to just format, normally inconvenient, but almost always solves the problem.
 

Read other 2 answers
RELEVANCY SCORE 34.4

Having jut updated my 'non windows' updates my network connection has now gone. Having completed troubleshooting it indicates that "The Intel Wireless N7260 adaptor is expereincing driver difficulties . The network is showing but has a X through it ANy help would be great Thanks Gordon

Read other answers
RELEVANCY SCORE 34.4

While using regular internet n i check Task Manager under Networking my max network usage is at 0.92% constant but fluctuates higher sometimes e.g when streaming a video, Link Speed is 100MB my bandwidth is 1MB. My thing is that when i run a VPN program which uses local area connection2 network usage is about 0.96-0.98% for LAN1 n about 9-11% on LAN2(uses 10MB Link Speed) meaning i am receiving about the same and a bit more speed. How if possible can i get 0.96-0.98% speed from LAN1 without using VPN program.

A:Network Issues

Think of it this way 1mb is 10% of 10mb, and 1% of 100mb.

Read other 2 answers
RELEVANCY SCORE 34.4

Network work adapter not found, wireless network shows no connetion are available. What should i do? Any ways to solve this problem?

Read other answers
RELEVANCY SCORE 34.4

Hey,

I just joined this forum because of a problem me and some other residents of my apartment had. However the problem always solves itself.
The essence of the problem are the following errors: Wireless Network Connection doesn't have Valid IP Configuration and problem with the driver for Wireless Adapter. There also is no way to change the public network to a home network.
Some additional info, we have 3 routers for the 3 floors. And currently only one of the residents is facing this problem (one who just moved in), but we all have had these connection problems and they all solved themselves.
I hope someone could help us, it would be greatly appreciated!

A:Network issues

Hello and welcome Gish mat some system specs for the affected machine would be really helpful it could just be something as simple as a driver for the adaptor.
In fat it is always helpful to add specs for your gear as we are always faced with the problem of asking for same and then trying to track down solutions.
System Info - See Your System Specs

Another good site for getting the specs in detail is HW Info HWiNFO, HWiNFO32/64 - Download (get the right bit version) and then run it - close the right hand window and them click on the devoices for details - see my pics for doing that.

Once the device has a brand and model number we can work from there.

Read other 1 answers
RELEVANCY SCORE 34.4

Hello, all!
 
Trying to fix my wife's computer (Toshiba Satellite Ultrabook, purchased 08/2013, Windows 8 as a standalone workstation) - I haven't been on it before; not very Windows 8 fluent.
 
Symptoms:
 
Can't load anything in IE or Firefox, including local router web interface
Can't RDC or FTP
Any update / download fails
CAN ping websites
 
On log in, balloon appears:
Failed to connect to windows service; Windows couldn't connect to the Windows All-User Install Agent service
Service isn't running, but starts on my command without issue. It's set for Automatic startup. Starting service does not resolve any issues.
 
Ran SFC... From cbs log:
DIRSD OWNER WARNING – about 600 instances, mostly in C:\windows
"Ignoring duplicate ownership for directory…" another 600 instances
I'm not really sure if this indicates anything serious.
 
My wife's account is an Admin account. While in her account, I created a new user account, also admin. This new account has the same issues as my wife's.
 
I don't know of any other problems with this computer.  Nothing indicates malware or virus (no redirects, popups, etc).
 
I'm starting to run out of ideas.  Thanks!
 
 

A:Network Issues?

First thing, run FRST http://www.bleepingcomputer.com/download/farbar-recovery-scan-tool/  Then run Service Scanner http://www.bleepingcomputer.com/download/farbar-service-scanner/  After those two, run ADW http://www.bleepingcomputer.com/download/adwcleaner/  If still having issues, then run Minitoolbox http://www.bleepingcomputer.com/download/minitoolbox/ and post the results.

Read other 2 answers
RELEVANCY SCORE 34.4

Hi can anyone help me?

My network has been playing up, it used to work fine, all connections were seen in 'My Networks' but now nothing is showing.

I used to have a full version of AVG antivirus but this was messing with the system so I uninstalled it and went for the AVG free version instead (which I had previously), since then my network hasn't worked. My friend tells me that this sometimes happens and that some regestry files may have been removed when I unistalled. He since helped me find a program that help me repair the registry which worked, but for some reason my antivirus switchs off and is unable to be found.

I then had to do a system restore to fix the problem. The main issue is that I have checked all connections and have pinged the network and all is fine (no packet loss). I've checked my router (netgear) and on the attached devices tab it states that my computer and the my other attached devices are UNKNOWN but connected, this could be the cause of the issue.
Does anyone know what I'm talking about and most important of all can you help?
 

A:Network issues

Read other 9 answers
RELEVANCY SCORE 34.4

so i setup my network with name mshome.......i can see the computer im on as well as one other.....but im trying to share a printer and the computer that i have the printer installed on cant access the network....ive been at this for hours now and cant figure it out.... can neone help me
 

A:network issues

Read other 10 answers
RELEVANCY SCORE 34.4

So i have two computers both have network issues. I have tried about 20 different fixes for each. I am getting around 7 mbps and i used to get 80. I bought a new network card and same results and a relative keeps saying its my computer. The one computer is put away and my new one is wired through ethernet and i still get 7 mbps. How do i go about fixing this and is there any way to convince that realitive its not my computer.
 

Read other answers
RELEVANCY SCORE 34.4

info:
-currently running windows 7 64 bit
-Atheros AR5005GS version 8.0.0.238 is the network driver i have
-the network card doesnt support 64 bit but worked with windows xp 64 bit before i upgraded to 7
-made sure the network drivers are up to date
-made sure windows wasn't turning off the device to save power
-I use a bridged connection

problem:
-My internet is usually fine but when i ping i usually get a 1-2% packet loss and in online games(world of warcraft in this case) my internet freezes then works again
-my router seems fine (my sisters internet is seemingly fine)
-Lag isn't a problem right away, but gets progressively worse the longer my internet is on, until i get dced
-my isp says my modem is fine
-I'm getting an error in the event viewer saying (event id 1129) "The processing of Group Policy failed because of lack of network connectivity to a domain controller. This may be a transient condition. A success message would be generated once the machine gets connected to the domain controller and Group Policy has successfully processed. If you do not see a success message for several hours, then contact your administrator."
-speedtest.net still says my download speed is at 9mbps which should be running quite normal
-Worked fine with a wired connection (though I don't have the option to do so all the time, this was just to test the connection)
-ran the windows internet test and said everything was fine
-troubleshooting shows up everyt... Read more

A:Network issues

Read other 10 answers
RELEVANCY SCORE 34.4

I recently got a new computer with Windows Vista (about 3 weeks ago), and since Day 1 I have had issues with the network. I work in a small office that uses a wired network, and i think it is a home network because we use a workgroup. The first problem I have is that sometimes the other computers in the network show up, sometimes they don't. The second problem I have seen is that other times, a few of the computers will show up, but not all of them. And, most recently, if the other computers do show up on the network, only some of the files are there, not all of them. I have been trying on my own for a while now to figure out what the problem is, but I really think I need some help. Any advice would be greatly appreciated.
 

Read other answers
RELEVANCY SCORE 34.4

My laptop with Windows 8.1 will randomly be unable to detect networks (like it just can't see any of them and disconnects). THis has been happening for sometime. I factory reset it which seems to have fixed the problem slightly (like the network is connected longer). But it still dc's. I have to restart the computer to even get the internet back.

A:Network Issues

Welcome to the forum. Is this wireless or network cable?

Read other 0 answers
RELEVANCY SCORE 34.4

Hello,

I am having issues with my Desktop computer ( Wired ) Windows XP Connecting to my internet connection through my router... I have a Linksys WRT54GS router/gateway. I also have two Windows Vista Laptops that connect through the same gateway and have no issues wirelessly or wired.. All three of my computers have been connected through this gateway before with out issue.. For some reason my Desktop computer will not connect any more.. My Network connection is saying that my network cable is disconnected but it is not... I can Unplug the Ethernet cable from my router and plug it directly into my DSL modem and the desktop computer will connect to the internet no problem, but if I connect the DSL modem to the router and then connect the same ethernet cable to the router and to my computer it will not communicate..

Thanks for any help with this issue..
Arlen
 

A:Network Issues

Read other 13 answers
RELEVANCY SCORE 34.4

I have a Compaq Laptop with Vista Home premium that I just got. I can connect to the network but it takes awhile for it to identify my router and during this time all my other pc's will lose the network connection. This also happens anytime I reboot the laptop as well. Anyone have any ideas of why this is happening. All replies appreciated.

A:Network issues

Hi and welcome to the forums.

First off, what make and model is your router; some routers (such as my secondary router) have a very low number of clients that are allowed to be connected at one time. It also may have some connection to how your router broadcasts (A, B, G or N) and how far away from it you are.

Please can you also tell us what OSs the other PCs are running and how they are connected.

As a general tip without knowing too much about your network, have you made sure that your WiFi card drivers are up to date? If you haven't it might be worth doing.

Oli

Read other 2 answers
RELEVANCY SCORE 34.4

Hey all, I'd be very VERY grateful for a step-by-step for this, thanks in advance.

I have recently bought a new laptop, and would like to network it via crossover ethernet cable with my desktop, for file sharing, LAN gaming (and possibly to use the laptop's wireless connection for the desktop to access the internet).

The laptop is wirelessly connected to my dads network, but my desktop is not.

If someone could give me a step-by-step on how I could set this up, then that'd be very helpful.
 

A:Please help! Network issues

jimberoo said:



Hey all, I'd be very VERY grateful for a step-by-step for this, thanks in advance.

I have recently bought a new laptop, and would like to network it via crossover ethernet cable with my desktop, for file sharing, LAN gaming (and possibly to use the laptop's wireless connection for the desktop to access the internet).

The laptop is wirelessly connected to my dads network, but my desktop is not.

If someone could give me a step-by-step on how I could set this up, then that'd be very helpful.Click to expand...

It would take a very long post to explain correctly how to acheive what it is you want.

There are plenty of websites that cover networking thoroughly such as
www.praticallynetworked.com.

Do a google and you will get plenty of other websites as well.

Regards
 

Read other 1 answers
RELEVANCY SCORE 34.4

OK, my current configuration is:

Computers connected wired and wireless to a Linksys WRT54G. I am using a Win2K3 server for DHCP, but this router is on the same subnet as the computers on my network. The Linksys router is "uplinked" to a Linksys RTP300 for VOIP, which is on a different subnet. This router is finally uplinked to my DSL modem on port 1 (which is a Westell 327W), and is on a 3rd subnet. Each device is set to get it's WAN address from the previous router, and all works fine.

This weekend, I tried putting everything on the same subnet as my computers (192.168.0.x).

I switched the WRT54G to "router" mode (was set to "gateway") and removed the "uplink" connection to the RTP300. I connected one of the 4 ports from this router to port 2 on the DSL modem. I did the same with the RTP300, connecting one of the 4 ports from that to port 3 on the DSL modem. I couldn't find an option to change the RTP300 to "router" mode.

I set each router to have an internal and external address on the same subnet (I think this is where I went wrong).

With this configuration, I could not get onto the internet at all. I could see all of the other computers on my network though. Not sure how this happened.

Anyone have any ideas?
 

A:network issues

"I set each router to have an internal and external address on the same subnet .."

Meaning WAN and LAN on same subnet? If so, that's certainly not good. If you were a router and was asked to put a packet for IP 10.0.0.10 on the proper subnet, and your choices were 10.0.0.x or 10.0.0.x, which one would you choose?
 

Read other 3 answers
RELEVANCY SCORE 34.4

Hi,

I have a problem that when I joined my new tablet to the network it connects normally but it has some issues. It says that I am connected with limited connectivity. Also when doing an ipconfig /all it says that the DNS Server is 127.0.0.1 and there are no DNS Servers on the device. What could have happened is that along time ago there was a DC named exactly like my new device.

I renamed the device and still I am experiencing the same issues.

Another weird thing is that I can browse the internet easily but then when for example I go and log in to Skydrive it says that I do not have an internet connection.
Any help?

Thanks.
 

A:Network Issues

Read other 6 answers
RELEVANCY SCORE 34.4

I uninstalled Acronis True Image 2015 and Eset Nod32. I installed Bit Defender and Malwarebytes premium. In the past my windows boot up would be superfast (SSD). Now everything boots up but then boot up lags waiting for the network. I uninstalled the two new programs to see if one of them was the issue but the boot up now still lags waiting for the network. I did the exact same with another wireless computer and it has the same issue only the lag isn't as bad as my desktop hardwired computer. I have no clue. I am guessing one of the uninstalls did something. Any ideas? I can restore my backup but hoping to fix this issue.

A:Network Issues At Log On

After not finding any solution, I did a complete disk/system restore. AOMEI backupper program works great, any way after the complete restore the network is still slow to boot up. This never happened before. I even did a router reboot just in case. Any ideas on what to check next?

Read other 6 answers
RELEVANCY SCORE 34.4

Hey everybody,

i just got a new PC last friday with 64bit vista ultimate and i have been having alot of problems with hooking it up to my home network. At first, i would plug it in and it would only let me get into "local area connection" local access only. I did a repair install which got rid of all updates that the company had put on, so its a fresh SP1 install. Now i can sometimes get it to connect to the internet, but the speed is ridiculously slow, like if i look at the antivirus updaters for speed (i cant access speedtest.net cuz it says i dont have flash or w.e. and it wont let me download it cuz the site wont load) i get max speeds of...4 kb/s...
PLZ help, i know its not just me because i was talking to some IT guys in town and they just set up their first x64 vista systems and they are all having similar issues as in not being able to connect externally, only to the local network.

A:Network issues

Are you getting connected to your router? What is your IP address? Do you have DNS entries.

Start
on start search type CMD and enter
ipconfig/all in the box. What is returned for IP, subnet mask, DNS servers.

Read other 4 answers
RELEVANCY SCORE 34.4

Hello friends.
I just switch ISP(15MB/ps Service) on Friday, and my Network then was just fine for my desktop. Then Yesterday for some reason. My PC here started to act funny, with slow, limited, to no Internet connect.

Yes. I am aware my Java is out of date, but I tried to download Java today, but would have taken 2 hours and 41 minutes, then failed to download.
Crewtown Network

Code:
Windows IP Configuration
Host Name . . . . . . . . . . . . : Sendo-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : cinci.rr.com
Wireless LAN adapter Local Area Connection* 3:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft Wi-Fi Direct Virtual Adapter
Physical Address. . . . . . . . . : 54-27-1E-E6-3D-2B
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Wireless LAN adapter Wi-Fi:
Connection-specific DNS Suffix . : cinci.rr.com
Description . . . . . . . . . . . : Realtek 8821AE Wireless LAN 802.11ac PCI-E NIC
Physical Address. . . . . . . . . : 54-27-1E-E6-3D-2B
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::a904:92a1:dfac:9e04%6(Preferred)
IPv4 Address. . . . . . . . . . . : 192.168.0.4(Pre... Read more

A:Network Issues.

Hello friends.
I just switch ISP(15MB/ps Service) on Friday, and my Network then was just fine for my desktop. Then Yesterday for some reason. My PC here started to act funny, with slow, limited, to no Internet connect.

Yes. I am aware my Java is out of date, but I tried to download Java today, but would have taken 2 hours and 41 minutes, then failed to download.


Code:
Zoek.exe v5.0.0.0 Updated 21-09-2015
Tool run by Sendo on Tue 09/22/2015 at 11:38:21.86.
Microsoft Windows 8.1 with Bing 6.3.9600 x64
Running in: Normal Mode Internet Access Detected
Launched: C:\Users\Sendo\Desktop\zoek.exe [Scan all users] [Script inserted]
==== System Restore Info ======================
9/22/2015 11:39:36 AM Zoek.exe System Restore Point Created Successfully.
==== Reset Hosts File ======================
# Copyright (c) 1993-2006 Microsoft Corp.
#
# This is a sample HOSTS file used by Microsoft TCP/IP for Windows.
#
# This file contains the mappings of IP addresses to host names. Each
# entry should be kept on an individual line. The IP address should
# be placed in the first column followed by the corresponding host name.
# The IP address and the host name should be separated by at least one
# space.
#
# Additionally, comments (such as these) may be inserted on individual
# lines or following the machine name denoted by a '#' symbol.
#
# For example:
#
# 102.54.94.97 rhino.acme.com # source server
# 38.25.63.10 x.acme.com # x ... Read more

Read other 40 answers
RELEVANCY SCORE 34.4

Ended up with a rather frustrating problem a couple of days ago regarding connecting to the net.
Apparently the connection decided to die all of a sudden by itself for some unknown reason and I've been unable to connect to the net since then. I've not made any changes to anything whatsoever, no recent windows or firewall updates, AVG update was normal as always, no major updates on that front - I was kinda just gaming a bit via Steam when it all of a sudden happened. Thing is that after having checked the network card, cable, scanned for viruses/malware, done a HJT check and so on, the darn thing still refuses to connect to the net. Weird part is though that it does get an IP and is able to contact the DNS server - just that packets don't really seem to be received properly. They just trickle in one packet every few seconds. Sending packets out doesn't seem to be a problem. I have called my ISP and they do seem to get a signal from me so I am rather clueless as to what could be wrong. I cannot tracert or ping anything past my card (127.0.0.1 responds just fine so the card itself works at least). Tried uninstalling ZoneAlarm as that was the only firewall I've been using but obviously the problem wasn't there.

I've tried pretty much everything now save from a total OS re-installation which I'd rather avoid.

Thing is that the net died like this a couple of times the day before all of this happened as well but this lasted for a few minute... Read more

A:Network issues.

*bump*
 

Read other 2 answers
RELEVANCY SCORE 34.4

I have a Dell Inspiron PC, and I am not able to connect to the internet (wired or wireless). I have tired everything with no success. Any help in resolving this issue is appreciated. Below is a log of "IPCONFIG"

Windows IP Configuration
Wireless LAN adapter Wireless Network Connection:

Connection-specific DNS Suffix . :
Link-local IPv6 Address . . . . . : fe80::e534:388d:33e1:95bf%15
Autoconfiguration IPv4 Address. . : 169.254.149.191
Subnet Mask . . . . . . . . . . . : 255.255.0.0
Default Gateway . . . . . . . . . :

Ethernet adapter Local Area Connection:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :

Tunnel adapter isatap.{B33DCBDA-8B4E-4201-AB27-2AB40FD10BE9}:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :

Tunnel adapter Teredo Tunneling Pseudo-Interface:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Thank you for any help
 

A:Network Issues

Read other 7 answers
RELEVANCY SCORE 34.4

Hi all,
 
I'm currently having some issues with my home network. I cannot connect to the Internet through my laptop (running Windows 8 Pro), but other computers and devices are connecting to the Internet just fine.
 
The PC says it is connected to the network with a full strength connection, but my adapter settings say that I am not receiving any packets.
 
My Network and Sharing Center says "Unknown" where it usually has my network adapter listed, and says "The dependency service or group failed to start."
 
Google Chrome says "DNS_PROBE_FINISHED_NO_INTERNET" when I try to navigate to any websites.
 
When I run Windows Network Diagnostics, it either says it can't identify the problem, or it says that it cannot detect proxy settings for the network, which I have cleared. 
 
 
What I have done so far:
 
I have reset my TCP/IP through the C:\Windows\Inf folder by modifying the nettcpip.inf file.
I have run netsh winsock reset and netsh int ipv4 reset.
I have scanned for malware that could be causing the issue, and there is nothing.
 
Here are the results of ipconfig/all:
 
C:\WINDOWS\system32>ipconfig/all
 
Windows IP Configuration
 
   Host Name . . . . . . . . . . . . : [redacted]
   Primary Dns Suffix  . . . . . . . :
   Node Type . . . . . . . . . . . . : Hybrid
   IP Routing Enabled. . . . . . . . : Yes
   WINS Proxy Enabled. . . . . . . . : No
 
... Read more

Read other answers
RELEVANCY SCORE 34.4

Since I got this computer on Christmas I have been experiencing lag spike while using anything that uses internet. Skype, video games, servers, web browsers. I play games on a more competative level and its becoming more and more annoying.

The issue is that I would lag for about 1-3 seconds every 5-10 min. I like to think i'm pretty good with computers and networks but I am out of ideas.

Here is my DXDIAG information if anyone can please suggest some solutions, i think its my motherboard.

___________DXDIAG________

------------------
System Information
------------------
Time of this report: 3/19/2011, 21:01:56
Machine name: COREY-PC
Operating System: Windows 7 Ultimate 64-bit (6.1, Build 7600) (7600.win7_rtm.090713-1255)
Language: English (Regional Setting: English)
System Manufacturer: System manufacturer
System Model: System Product Name
BIOS: BIOS Date: 08/27/10 13:04:41 Ver: 08.00.15
Processor: Intel(R) Core(TM) i5 CPU 750 @ 2.67GHz (4 CPUs), ~2.7GHz
Memory: 4096MB RAM
Available OS Memory: 4094MB RAM
Page File: 1744MB used, 6441MB available
Windows Dir: C:\Windows
DirectX Version: DirectX 11
DX Setup Parameters: Not found
User DPI Setting: Using System DPI
System DPI Setting: 96 DPI (100 percent)
DWM DPI Scaling: Disabled
DxDiag Version: 6.01.7600.16385 64bit Unicode

------------
DxDiag Notes
------------
Display Tab 1: No problems found.
Display Tab 2: No problems found.
Sound Tab 1: No problems found.
Sound Tab 2: No problems found.
Sound Tab 3: No problems... Read more

Read other answers
RELEVANCY SCORE 34.4

Hey! arrived lan today and got this interesting network problem that i cant figure it out...hope some off u had this problem and knows what to do=)

so my nett connection seems to go on and off like every 20sec or so. first started wow and my ms got to 4k and i could play like it was 100.. after 20-30 sec i allways get this 5-10sec lag spike and everything stops but whatever button i push i can hear on my friends sound but i never get dc.
tryed on steam and u name it, same problem. even on nett brownser come on and off. reinstalled network driver, change nettwork cable even reinstalled my windows to windows 7 and still same problem... thoguht maybe its the router but hey all others that are on this router doesnt seem to have any network issues..

so cant even think of what to do know, whats wrong...
thx in advanced=)
 

A:network issues

Please supply the following info, exact make and models of the equipment please.

Name of your ISP (Internet Service Provider).
Make and exact model of the broadband modem.
Make and exact model and hardware version of the router (if a separate unit).
Make and exact model and hardware version of any other network equipment, like a repeater, a booster, hi-gain antenna, etc.
Model numbers can usually be obtained from the label on the device.
Connection type, wired or wireless.
If wireless, encryption used, (none, WEP, WPA, or WPA2)
Version and patch level of Windows on all affected machines, i.e. XP (Home or Pro), SP1-SP2-SP3, Vista (Home, Business, Ultimate), etc.
The Internet Browser in use, IE, Firefox, Opera, etc.


Please give an exact description of your problem symptoms, including the exact text of any error messages.


Have you tried to do a system restore to before the problem occurred?
If you're using a wireless connection, have you tried a direct connection with a cable to see if that changes the symptoms?
For wireless issues, have you disabled all encryption on the router to see if you can connect that way?
For wireless connection issues, have you removed all the stored wireless network profiles and then searched for the network?
For wireless laptops, have you made SURE the wireless switch is on?
For wired connection issues, have you booted in Safe Mode with Networking to see if that changes the symptoms?
Have you connected directly to the broadband modem ... Read more

Read other 1 answers
RELEVANCY SCORE 34.4

Hello I have a netgear 48 port router.

My question is....
I have 1 computer that will not get on the network. I have tested the cable multiple times. even ran 3 new cables to it. still nothing. I put my laptop down there and it connects fine. then plug it back up still nothing.

I put a switch beside the computer and pluged it in and it works fine.

This has me completly puzzeled.

I have been up for 32 hours and can't get this fixed.

if you need anymore info please ask.

Thanks.
 

A:Network Issues

Hi:So let's see how the problem pc "views it's network connection.

From a Johnwill post on the Networking Forum
Try these simple tests.

Hold the Windows key and press R, then type CMD (COMMAND for W98/WME) to open a command prompt:

In the command prompt window that opens, type type the following commands one at a time, followed by the Enter key:

NOTE: For the items below surrounded with < >, see comments below for the actual information content, they are value substitutions from the previous IPCONFIG command output! Do NOT type <computer_IP_address> into the command, that won't work. Also, the < and > in the text is to identify the parameters, they are also NOT used in the actual commands.

Do NOT include the <> either, they're just to identify the values for substitution.

IPCONFIG /ALL

PING <computer_IP_address>

PING <default_gateway_address>

PING <dns_servers>

PING 74.125.45.100

PING yahoo.com

Right click in the command window and choose Select All, then hit Enter to copy the contents to the clipboard.
Paste the results in a message here.

<computer_IP_address> - The IP Address of your computer, obtained from the IPCONFIG command above. (For Vista/Win7, the IPv4 Address)

<default_gateway_address> - The IP address of the Default Gateway, obtained from the IPCONFIG command above.

<dns_servers> - The IP address of the first (or only) address for DNS Servers, obtained from the IP... Read more

Read other 3 answers
RELEVANCY SCORE 34.4

I've been getting having a weird problem with my internet connection on my laptop, but I don't know what is causing it. It seems like it's gotta be either Vista, my wifi adapter, or my router.
I'll be online, and suddenly I'm unable to surf or connect to messenger, but my torrents keep running fine.
Firefox gives me an error about the website being correct, but being unable to connect to it, and windows messenger gives me an error about my network connection. I can't even log in to my router.
I can ping just fine, and I get a response from my router, from google and anything else I try, but the only way I can get back to surfing or messaging is to disconnect from my wireless network and reconnect. My roommate's computer is wired to the router and has no issues at all. The router is a dlink WBR-2310
My computer is set to pretty much ignore all power saving features when it's plugged in, and that hasn't changed in a while. I haven't installed any new software in the past few days. I did in fact connect a new external hard drive, but I don't see how that could be the problem.
My computer's been running fine, until last night when this happened suddenly. In fact, I was actually surfing when this happened.
 

A:Odd network issues

Update:
When my connection stops working, it appears as though open connections still function, but new ones will not. If I stop my torrents and restart them, they won't work either.
Reconnecting to my network doesn't fix the problem after all, it turns out all I can do is wait it out.
I can rule out the wifi card and the router because once my connection stops, connecting to internet via modem doesn't help. I can connect to the internet, but still can't do anything with my connection.
Now what could cause this to happen?
 

Read other 1 answers
RELEVANCY SCORE 34.4

ok listen i had my router and everything working when i had 192.168.1.1 as default ip
so i wanted to change my LAN ip address to 10.10.10.xxx i changed it in router /release /renew and computer works fine it read 10.10.10.xxx ip address and brother printer does to which is brother 685cw wireless printer it reads a 10.10.10.xxx ip but doesn't connect it's ok not to worried about that one. The werid thing is my laptop doesn't connect to router now i try to


here is ipconfig /all


Windows IP Configuration
Host Name . . . . . . . . . . . . : Work1
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
Wireless LAN adapter Wireless Network Connection 3:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : D-Link WUA-1340 USB Adapter
Physical Address. . . . . . . . . : 00-22-B0-6C-25-EE
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter isatap.{FCC7F049-C7DD-4FFD-934E-9F8391EE8358}:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft ISATAP Adapter #2
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Teredo Tunneling Pseu... Read more

A:Network TCP/IP Issues

nevermind fixed it. i had wireless mac filter but i disabled it please closed thread thanks anyways.

Read other 1 answers
RELEVANCY SCORE 34.4

I wasn't sure which forum to put this in (Windows 7 or internal hardware) as I'm not entirely sure what the problem is. The problem is just what I state in the topic title, constant disconnects/reconnects. Not all the time though, as far as I'm aware it's only when playing online games(it's definitely noticeable while playing online games). However, this doesn't happen -every- time I'm playing an online game, though it does happen a lot. Other computers in my house do not appear to have any issues, it's just mine.

I realize that this is not enough information to solve this problem, so if you can tell me what information you need and I'll post it.

Thanks for any help!

A:Network Issues

Please download FarbarServiceScanner and run it on the computer with the issue.(right click and run as admin for each of these programs.)Make sure the following options are checked:Internet ServicesWindows FirewallSystem RestoreSecurity Center/Action CenterWindows UpdatePress "Scan".It will create a log (FSS.txt) in the same directory the tool is run.Please copy and paste the log to your reply.Please download MINITOOLBOX and run it.Checkmark following boxes:Report IE Proxy SettingsReport FF Proxy SettingsList content of HostsList IP configurationList Winsock EntriesList last 10 Event Viewer logList Installed ProgramsList Users, Partitions and Memory sizeList Devices (problems only)Click Go and post the result.

Read other 18 answers
RELEVANCY SCORE 34.4

I am trying to set up a wireless network on a desktop running windows xp. The machine was connecting to the Internet fine until I added the wireless router in the mix. After adding the router and going through the set-up for that I am unable to load websites on my browser. It is a linksys wrt54g router. The setup page 192.168.1.1 will load but google will not. I ran the diagnostic test on IE and it resulted in DNS failure and http: Error 12007, cannot make HTTP, HTTPS, or FTP connection. It says my LAN is connected yet nothing will load. Help me please! I would like to connect via wired connection on the desktop and access the wireless using an ipad and iPhone. Thanks in advance!
 

A:Network set-up issues

Read other 10 answers
RELEVANCY SCORE 34.4

I can not seem to connect to any of my other computers or wireless printer. I have a new HP lap top and wife has the same. She does not have an issue. When I go to look at my network I can see all of them but the error says to check with my admin. It says I do not have access. duh, I am the admin LOL

Can anyone suggest anything. I tried to change the printer sharing under discovery and it is grayed in so I cannot change it

A:network issues

Originally Posted by larbec


I can not seem to connect to any of my other computers or wireless printer. I have a new HP lap top and wife has the same. She does not have an issue. When I go to look at my network I can see all of them but the error says to check with my admin. It says I do not have access. duh, I am the admin LOL

Can anyone suggest anything. I tried to change the printer sharing under discovery and it is grayed in so I cannot change it



Hi,

I want to clarify one thing from u. right click on my computer icon and select manage.

Let me know the result.

Read other 13 answers
RELEVANCY SCORE 34.4

My office has a simple p2p network with mainly xp computers. We have a central nas, a server (that doesn't do anything) and several computers attached.

One windows 7 computer is part of this network but can neither see nor be seen by other computers. Workgroup/homegroup are correct, i have set dns, and checked sharing in windows, and in comodo. The nas is a mapped network drive, because windows 7 can access everything after restart, but after 30 min or so it cant reach anything but never loses its internet connection.

If you open up Computer, and watch the network drive, you can watch the little red x rapidly appear and disappear as windows tries but fails to reconnect with the network locations. How do I make it so that her computer will stay 'connected' to the network.

Thanks in advance for you help

A:Network Issues

check to make sure that your network card is setup properly and that driver and settings are correct.
also, i noticed this one of my machines..
if you do a cmd then ipconfig the ip ur trying to access and -t
see if those packets drop

Read other 2 answers
RELEVANCY SCORE 34.4

Hopefully someone can help here. a PC on our network lost it's network connection. In the Network IP settings all our PC's are set to obtain IP address automatically and if I manually set these it regains network connectivity. I have checked on another PC when doing IPCONFIG /RELEASE and it release the settings & when requested IPCONFIG /RENEW the domain server re-issued an IP address so there appears no DCHP issue on the server. Also if the IP settings are made manually, when the PC reboots it goes back to automatically obtain IP address. I have a sneaky suspicionj there maybe some at large worming around even through Super Anti Spyware, Malware Bytes & AVG (paid Network version) can't find anything.....Heeellllp!
 

A:Network / IP Issues

would you check the status of the following services
what version of windows do you have ?
------------------------------------------------------------------------
{Services}
post back the status - started/stopped and automatic/manual
Check your Services are Started on all PCs:

COM+ Event System (for WZC issues)
Computer Browser
DHCP Client
DNS Client
Network Connections
Network Location Awareness
Remote Procedure Call (RPC)
Server
TCP/IP Netbios helper
Wireless Zero Configuration (XP wireless configurations only)
WLAN AutoConfig (Vista wireless configurations only)
Workstation

Note: You can check the services in Control Panel, Administrative Tools, Services.

All of these services should be started, and their startup type should be automatic (or perhaps manual).

If a service is not running, open it's properties and check the dependencies. Check each of the dependencies and see which one is preventing the service from running.

Checking the event log is also a good idea here, there may be clues to what is failing.
Start > control panel > administrative tools > event Viewer

------------------------------------------------------------------------
 

Read other 1 answers
RELEVANCY SCORE 34.4

Having some strange issues with my network, on the wired end, Machine randomly see or cant see eachother in the workgroup. On the wireless side, many times when you try and get on the network, you will get limited or no connectivity because an IP address could not be recieved.

Not sure exactly what type or types of servers will solve my issue, but need to fix this fast and try to get my network as stable as possible.
 

A:Network issues

Please supply the following info, exact make and models of the equipment please.

Name of your ISP (Internet Service Provider).
Make and exact model of the broadband modem.
Make and exact model and hardware version of the router (if a separate unit).
Model numbers can usually be obtained from the label on the device.
Connection type, wired or wireless.
If wireless, encryption used, (none, WEP, WPA, or WPA2)
Version and patch level of Windows on all affected machines, i.e. XP (Home or Pro), SP1-SP2-SP3, Vista (Home, Business, Ultimate), etc.
The Internet Browser in use, IE, Firefox, Opera, etc.


Please give an exact description of your problem symptoms, including the exact text of any error messages.


If you're using a wireless connection, have you tried a direct connection with a cable to see if that changes the symptoms?
For wireless issues, have you disabled all encryption on the router to see if you can connect that way?
Have you connected directly to the broadband modem to see if this is a router or modem/ISP issue?
If there are other computers on the same network, are they experiencing the same issue, or do they function normally?


On any affected computer, I'd also like to see this:

Hold the Windows key and press R, then type CMD (COMMAND for W98/WME) to open a command prompt:

Type the following commands on separate lines, following each one with the Enter key:

PING 206.190.60.37

PING yahoo.com

NBTSTAT -n

IPCONFIG /ALL

Right click in the comm... Read more

Read other 1 answers