Over 1 million tech questions and answers.

MC7354 on T520 [Main Problem Solved, No LTE however]

Q: MC7354 on T520 [Main Problem Solved, No LTE however]

I cannot get the MC7354 on the Thinkpad T520 to work. It is constantly complaining that the Hardware switch is off when this laptop does not have a WWAN hardware switch. I also have a MC7700 that is doing the exact same thing. I can't get either of these cards to work simply cause I can't get them to actually turn on in windows.













Solved!

Go to Solution.

RELEVANCY SCORE 200
Preferred Solution: MC7354 on T520 [Main Problem Solved, No LTE however]

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: MC7354 on T520 [Main Problem Solved, No LTE however]

I believe the slide switch at the front left controls both the WiFi and WWAN radios

Read other 9 answers
RELEVANCY SCORE 90.8

I cannot get the MC7354 on the Thinkpad T520 to work. It is constantly complaining that the Hardware switch is off when this laptop does not have a WWAN hardware switch. I also have a MC7700 that is doing the exact same thing.  I can't get either of these cards to work simply cause I can't get them to actually turn on in windows. 

Read other answers
RELEVANCY SCORE 52

I have had this laptop for a few months now. I am planning to upgrade the processor. I'm really just looking for a fan/heatsink to combat it's insane heat. Is there even a powerful enough fan, if so will it withstand OC for longer amounts of time. Even 24 hours. Help.

Read other answers
RELEVANCY SCORE 52

I have had this laptop for a few months now. I am planning to upgrade the processor. I'm really just looking for a fan/heatsink to combat it's insane heat. Is there even a powerful enough fan, if so will it withstand OC for longer amounts of time. Even 24 hours. Help.

Read other answers
RELEVANCY SCORE 52

I have had this laptop for a few months now. I am planning to upgrade the processor. I'm really just looking for a fan/heatsink to combat it's insane heat. Is there even a powerful enough fan, if so will it withstand OC for longer amounts of time. Even 24 hours. Help. To all who have read my request and those who will read this will this be sufficient http://m.ebay.com/itm/262933210164?_mwBanner=1

Read other answers
RELEVANCY SCORE 51.2

Sorry if this gets long, I want to make sure I explain the problem sufficiently. I am trying to hook up my LG LCD HDTV to my husband's Toshiba Satellite via HDMI. I right-clicked on the desktop and went into "Graphics Propreties...". At first, I did a desktop clone, which worked out great, but I wasn't satisfied with the resolution. I figured it had something to do with the max resolution available on the notebook, since what displayed on the TV was just a clone of the notebook's display. I then switched to single display, with the HDTV as the display. That worked, andI was able to up the resolution past what was available before. Here is where the problem starts: I was switching back and forth with a few different resolutions, and happened to pick one that apparantly my HDTV does not like, as the screen went black and "Invalid Format" danced around the screen. As soon as I unplugged the TV from the notebook, it switched back to the notebook's display. Here is my question: I need to know how to either fix the resolution issue with the TV without it being plugged into the notebook, or I need to know how to reset the graphics settings so that it does not remember that I ever hooked it up to the TV in the first place, at which point I can start from scratch and not mess around with the resolution to begin with.
 

A:Solved: Problem with using HDTV as main display

Hi Skinygrl99, and welcome to TSG.

Found this in the PDF version of the A500 Series User Guide:
Directing the display output when you turn on the computer
Once you have connected an external display device, you can
choose to use the internal display only, the external device only, or
both simultaneously.
Some modes are only available with the appropriate device attached
and turned on.
The quickest way to change the display output settings is to use the
display hot key (Fn + F5):
1 Press Fn and F5 simultaneously.
2 While holding down Fn, press F5 repeatedly until the setting
you want takes effect. Briefly pause each time you press the F5
key to allow time for the display to change.
This hot key cycles through the settings in the following order:
❖ Built-in display only
❖ Built-in display and external monitor simultaneously
❖ External monitor only
❖ TV (or other external video device) only
❖ Built-in display and TV (or other external video device)
simultaneously
❖ Built-in display and external monitor (extended desktop)
❖ Built-in display and TV (extended desktop)
❖ Swap—Switch primary display between internal display
and external monitor when using extended desktop
Click to expand...

That should let you get back to using the control panel to select a suitable mode for the exteranl screen.
 

Read other 3 answers
RELEVANCY SCORE 47.2

hi i have really weird problem with my t520.If i disconnect lid wire with camera hall sensor, thinklight and led board, everything works fine backlight, clear picture everything works.If i plug it lid wire back, i have image but no backlight. Disconnecting camera and led board not helping.I replaced this wire 2 times, no success.

Read other answers
RELEVANCY SCORE 46.8

I have a T520 with Intel Centrino 6205 network card. I have ability to run Win 7 and Win 10. With Win 10, both 2.4 and 5Ghz SSIDs are available.With Win 7, I only see the 2.4 GHz SSID. I use Win 7 most of time, so would like to get this to work. The driver for the Centrino card appears to be 15.13.0.1 dated 22July2014. When I try and update from the Device Manager, it goes into an endless on-line search. Looking at this site, three driver options come up, but the numbers don't look like the one that is installed. The Intel Proset software version is 17.12.0 dated 2Oct2014. Questions:Is there a way to switch on the 5Ghz band in settings somewhere?If it is a driver problem, how to I find the correct driver? 

Read other answers
RELEVANCY SCORE 46

Lenovo Thinkpad T520 Windows 7 Pro,no wifi,just bluetooth.


























3.jpg ?142 KB

A:Lenovo Thinkpad T520 wifi problem

 


























2.jpg ?60 KB

Read other 2 answers
RELEVANCY SCORE 42.4

Hi all
So far I,ve enjoyed using W7 X-64 but there's one application that consistently (and randomly) fails for what I can see is no apparent reason.

The message IE8 has unexpectedly stopped working.
You then restart IE8 and it will sometimes but not always restore your last session.

I use almost NO plugins apart from the adobe flash - this installs on the 32 bit version of IE8 but not the 64 bit version.

(You can tell if flash is working / installed or not) by simply loading the BBC's home page (BBC - Homepage) and seeing if there is a little square analog clock application running at the right hand top of the screen - this won't appear if you start the 64 bit version of IE8).

I "tolerated" the occasional failure of the pre-RTM versions of W7 but I would have expected it to be fixed in the RTM.

Handling badly written / dubious code from zillions of websites can be tough on a browser but IMO the browser should be robust enough to just ignore or issue a message when it has problems accessing a particular site.

So W7 X-64 RTM in general very positive but not too happy with some aspects of IE8.

(Firefox hasn't yet crashed on my system - but for work compatability I'm often forced to use IE8 ----- so don't reply "why not use another browser please ).

Cheers
jimbo

A:IE8 - my main problem with W7 X-64 RTM

Here's something you can do:
1: Open Internet Options and go to and uncheck Enable Protected Mode.
2: Under Advanced tab, uncheck Enable 3rd party browser extension.

Clear all cookies and temp and then restart your pc.

Read other 2 answers
RELEVANCY SCORE 42.4

I am having an issue with my main pc, computer 1 in my signature, not turning on or shutting itself down. It all started last week, I left the pc on and went to work, then a couple days later went to get on the pc and it was off. I have to try several times at turning it on before I finally get a post beep, I have unplugged the dvd drive, took out the video card, (that was my problem last time) and I even took out the ram and reseated it but I still can't get it to post beep the way it should. When I finally do get it to turn on it loads everything just fine then shuts itself down unexpectedly. I have a new power supply bought earlier this year and I am also on my 3rd video card since building this system. I was thinking maybe that the stuff between the processor and cooler could be old and not working, there by forcing the shutdown, any thoughts would be appreciated.
 

A:Problem with main pc

Read other 16 answers
RELEVANCY SCORE 42

Yes i've been getting this problem when I start my computer up, I have getright as my downloader and the second it starts, another download box pops up to download a file called main from t34rulit.com. it only does it once every start up and I am on 56k so im not instantly connected.heres a Hijack this log file.Logfile of HijackThis v1.98.2Scan saved at 12:00:14 PM, on 12/4/2004Platform: Windows XP SP1 (WinNT 5.01.2600)MSIE: Internet Explorer v6.00 SP1 (6.00.2800.1106)Running processes:C:\WINDOWS\System32\smss.exeC:\WINDOWS\system32\winlogon.exeC:\WINDOWS\system32\services.exeC:\WINDOWS\system32\lsass.exeC:\WINDOWS\system32\svchost.exeC:\WINDOWS\System32\svchost.exeC:\Program Files\Common Files\Symantec Shared\ccSetMgr.exeC:\Program Files\Common Files\Symantec Shared\SNDSrvc.exeC:\Program Files\Common Files\Symantec Shared\ccEvtMgr.exeC:\WINDOWS\system32\LEXBCES.EXEC:\WINDOWS\system32\spoolsv.exeC:\WINDOWS\system32\LEXPPS.EXEC:\WINDOWS\Explorer.EXEC:\PROGRA~1\Grisoft\AVGFRE~1\avgamsvr.exeC:\PROGRA~1\Grisoft\AVGFRE~1\avgupsvc.exeC:\Program Files\Common Files\Symantec Shared\ccProxy.exeC:\Program Files\Norton Internet Security\Norton AntiVirus\navapsvc.exeC:\WINDOWS\System32\nvsvc32.... Read more

A:T34rulit.com Main problem?

I want you to fix some of those entries. Please do the following:Please make sure that you can view all hidden files. Instructions on how to do this can be found here:How to see hidden files in WindowsRun Hijackthis again, click scan, and Put a checkmark next to each of these. Then close all other windows--you should only see HijackThis on your Desktop--and click the Fix Checked button.O4 - HKLM\..\Run: [FX] C:\WINDOWS\Downloaded Program Files\ieloader.exeO16 - DPF: {39B0684F-D7BF-4743-B050-FDC3F48F7E3B} (FilePlanet Download Control Class) - http://www.fileplanet.com/fpdlmgr/cabs/FPDC_1_0_0_44.cabO16 - DPF: {88D969C0-F192-11D4-A65F-0040963251E5} (XML DOM Document 4.0) - file://C:\TempEI4\EI40_\msxml4.cabO16 - DPF: {99802379-7362-40E2-9D28-8A3B9AF880B7} - http://hotsearchbar.com/toolbar2/winhot32.cabReboot your computer into Safe ModeThen delete these files or directories (Do not be concerned if they do not exist)C:\WINDOWS\Downloaded Program Files\ieloader.exeC:\TempEI4\EI40_\msxml4.cab<=Delete TempEI4 FolderReboot your computer to go back to normal mode and post a new log.

Read other 5 answers
RELEVANCY SCORE 42

my main board wont load when powered. when i apply power, the keyboard lights, and the CPU/sink fan starts, but the monitor does not reflect any activity. i pused the num lock key, to see if that would work, but it didn't respond.

the board is a "PC100 Systemboard, Slot 1/socket 370". the processoer is a pentium celeron.

so far, i have:

changed memory, changed CPU, checked and confirmed jumper settings, replaced the bios battery, replaced the BIOS chip itself, swaped power supplies, striped periphials, and even changed the system speaker to see if there was an "error beep" i was missing.

the results:
nothing.

the VGA "card" is onboard, with a ribbon cable "dongle"

i think that somthing is bad in the electronics of the board itself.

the system was functional before, then i put it aside, while i worked with another machine. now it just "doesn't work".

if anyone has sugguestions (can't spell that word), or knows how to check the board itself, let me know.

my email is:

[email protected]

my AIM handle is:

LNBLD

thanks,

Nick
 

A:main board problem

strainge that you dont get any beep code , not even the single beep . i assume that you have tried another monitor .
 

Read other 2 answers
RELEVANCY SCORE 42

hello!!I have DAP , and it automatically tries to download this "http://t34rulit.com/main.exe" everytime i open any type of window (IE, windows explorer, my computer...)searched the web, found your site to be very informative, got the hijackthis.exe v1.98.2... here's the log...Logfile of HijackThis v1.98.2Scan saved at 12:30:07 PM, on 05/12/2004Platform: Windows 98 SE (Win9x 4.10.2222A)MSIE: Internet Explorer v6.00 (6.00.2600.0000)Running processes:C:\WINDOWS\SYSTEM\KERNEL32.DLLC:\WINDOWS\SYSTEM\MSGSRV32.EXEC:\WINDOWS\SYSTEM\MPREXE.EXEC:\WINDOWS\SYSTEM\mmtask.tskC:\WINDOWS\SYSTEM\MSTASK.EXEC:\PROGRAM FILES\COMMON FILES\SYMANTEC SHARED\CCEVTMGR.EXEC:\PROGRAM FILES\COMMON FILES\SYSTEM\MOSEARCH\BIN\MOSEARCH.EXEC:\PROGRAM FILES\COMMON FILES\MICROSOFT SHARED\VS7DEBUG\MDM.EXEC:\PROGRAM FILES\NOVAPORTAL.COM\NOVAPORTAL SINGLE USER\NPSU.EXEC:\WINDOWS\SYSTEM\RPCSS.EXEC:\WINDOWS\SYSTEM\PSTORES.EXEC:\WINDOWS\SYSTEM\TAPISRV.EXEC:\WINDOWS\EXPLORER.EXEC:\WINDOWS\TASKMON.EXEC:\WINDOWS\SYSTEM\SYSTRAY.EXEC:\PROGRAM FILES\COMMON FILES\SYMANTEC SHARED\CCAPP.EXEC:\PROGRAM FILES\DAP\DAP.EXEC:\PROGRAM FILES\WINAMP\WINAMPA.EXEC:\WINDOWS\ptsnoop.exeC:\PROGRAM FILES\COM... Read more

A:need help for "t34rulit.com/main.exe" problem

First, click here to download Javacool's RapidBlaster killer. Launch the program and hit the Scan button. RBKiller will find any RapidBlaster variants on your system, kill the process, delete the Registry Run entry, and remove the file itself. Reboot when done.Click here to download Spybot Search & Destroy - install, update, scan and fix all RED items it finds. Reboot when done. Click here to download Ad-Aware SE and install. Before scanning click on "check for updates now" to make sure you have the latest reference file. Click "Start", select "Perform Full System scan" and "Next" to start the scan. When the scan is finished, the screen will tell you if anything has been found, click "Next". The bad files will be listed, right click the pane and click "Select all objects" - this will put a check mark in the box at the side, click "Next" again and click "OK" at the prompt "# objects will be removed. Continue?".Reboot when done. Rescan with HJT and post a new log here so that any remnants can be removed manually.

Read other 6 answers
RELEVANCY SCORE 41.6

Deleting, I am missing data, sorry!!!!!
 

Read other answers
RELEVANCY SCORE 41.2

Basically the problem is, that the Main Menu keeps appearing then disappearing ON ITS OWN. I don't even press a button and it shows up then goes away, then shows up, repeatly, for the longest times it keeps doing this. It gets the worst on weekends.

Anyways it's super annoying and right about now I wanna break my monitor.

I am using a Hp computer, its kinda new or whatever. The monitor itself is a hp pavilion f1703.

its doin it as i'm typing this......

help me

A:Monitor Main Menu Problem

Check and make sure the connections on your mouse and keyboard are secure.

If you are using USB connections for them, try PS2 instead, in fact, if you can borrow a mouse and keyboard from another computer try them, again, preferably not USB connected.

If they are wireless, change the batteries (yes, they do indeed have batteries).

Read other 3 answers
RELEVANCY SCORE 41.2

This NET. Main Frame 3. 5 SP1 shows up in my PROGRAMS & FEATURES. It will not update. I tried to uninstall, but instead it acts as if it is INSTALLING and not UNINSTALLING. How can I manually uninstall
this...
I have a NET. Main FRAME Client 4.0
What is the purpose for NET. Main Frame 3. 5??? or 4.0???
TIA

My OS is Vista.
 

A:Solved: NET. Main Frame 3. 5 SP1

Read other 15 answers
RELEVANCY SCORE 41.2

Used Spring Cleaning program to clean up registry and it deleted Norton from my system tray (NAV still runs in background and I can run LiveUpdate ... can't run 'main' NAV from All Programs - to scan manually). Have the original installation CD so i can delete and reinstall but am concerned that my 'subscription' will not be in effect and can't find an email address for Norton (where they will be respond). {Install is for Norton 2002 but have renewed each year}

Suggestion for how to get NAV 'main' program to run??

have WIN XP SP1
 

A:Solved: Norton Main Pgm Won't Run

Uninstall and reinstall it. your subscription will be fine.
 

Read other 1 answers
RELEVANCY SCORE 41.2

I think my hd is on its way out. Lately I have to used the OS disk to fix corrupted files more often. And after start up, the hd making noise sort like it doing formatting, and won't stop until at least 15 minutes later.
So my question is: Is it the hd going bad? If it is, then how can I make a duplicated or moved everything on it, including the operating system, to a new hd?

My second question is: The computer is fast off line and online such as surfing the net. On a particular site, it really slow. It's not the site because my other computers load it fast (older computer too).

The OS is window Vista 32. Dedicated video card. 2.5 ghz cpu speed, dual core AMD.

Thanks in advance for your input/help.
 

A:Solved: Duplicate of main hd

Read other 10 answers
RELEVANCY SCORE 40.8

EDIT Moved from Am I Infected to XP. As requested in post 22 ~~boopmeMy computer runs XP - Home.Last night I was prompted to update Media Player to version 8. I was afraid to do so, because many "updates" from MS mess up my computer. However, I loaded the update. I noticed the new icons in the tray and on the Start Menu, so I assumed all was well.On Friday nights I run my anti virus and anti spyware software. I started AVG anti-spyware. I checked on it 2 hours later and my boot up screen was on the monitor. By bootup screen I mean, when my machine is turned on, it stops soon after the bootup begins and says something about the Processor was changed??? and prompts me to hit F1 to continue or Del to go to the BIOS setup. I always hit F1 and the machine always bootsup just fine.Something happened while AVG was running to shut down the computer, what I don't know and I don't know if it is connected to the Media Player update or to a virus I picked up the night before (4 of us use this computer, so viruses and adware are not uncommon - I automatically run Norton Anti-virus and manually run AVG, Ad-Aware, SuperSpyware and Lavasoft). HOWEVER, this time when I hit F1 the machine did not boot up but rather loaded my desktop but with NO tray, NO icons and no response from the Windows key on the keyboard, but with only the mouse pointer on the screen. I could get the Task Manager by hitting Alt-Ctl=Del, but nothing else.I rebooted several times, and always ... Read more

A:Boot problem of main operating system

Are both of these installations in the same partition?Since you can open Task Manager, Click on the Applications tab and end all running processes.Start a new task and type explorer.exe and OKHopefully, you should have your Desktop back and you can run some tools--------------------------------------------------------The process of cleaning your computer may require you to temporarily disable some security programs. If you are using SpyBot Search and Destroy, please refer to Note 2 at the bottom of this page.Please download Malwarebytes Anti-Malware and save it to your desktop.alternate download link 1alternate download link 2Make sure you are connected to the Internet.Double-click on mbam-setup.exe to install the application.When the installation begins, follow the prompts and do not make any changes to default settings.When installation has finished, make sure you leave both of these checked:Update Malwarebytes' Anti-MalwareLaunch Malwarebytes' Anti-MalwareThen click Finish.MBAM will automatically start and you will be asked to update the program before performing a scan.If an update is found, the program will automatically update itself.Press the OK button to close that box and continue.If you encounter any problems while downloading the updates, manually download them from here and just double-click on mbam-rules.exe to install.On the Scanner tab:Make sure the "Perform Quick Scan" option is selected.Then click on the Scan button.If asked to select the drives to scan, lea... Read more

Read other 21 answers
RELEVANCY SCORE 40.8

My problem is that recently my headphones and pc speakers arent qorking properly. normally when the headphones arent plugged in the speakers should play sound and when the headphones are plugged in, the speakers mute and sound goes to the headphones.

well now its one or the other. when i boot, if the headphones are in, sound only comes to them and when they are unplugged there is nothing. same for the speakers at boot. the "playback devices" menu recognizes when the headphones are plugged in but sound still streams to speakers unless it is booted with them plugged in.

more info. a while ago i uninstalled realtek and used the computer without it for about 6 months fine. then i realized it was still hiding on the computer and tried to re-install it. it worked until i started getting BSOD's with an AVG update. now realtek is hidden with no way to access it though it's drivers are still used in adobe audition and the speaker icon says im using the stock 'high definition audio device'. i feel like this has something to do with this.

any suggestions?

A:Headpone/ main speaker problem & BSODs

Update your Realtek audio drivers - http://218.210.127.131/downloads/

Go into Windows Control Panel, Realtek Control panel and change settings.

Remove AVG - http://jcgriff2.com/A-V_Removal_Tools/AVG_Removal.html

Reboot upon completion.

Install MSE - http://www.microsoft.com/Security_Essentials/

Regards. . .

jcgriff2

`

Read other 3 answers
RELEVANCY SCORE 40.8

Hi

On my outlook express 6 the outlook express main folder hasn't changed for ages. It's still saying that there are two undread messages from ages ago! I am recieving emails ok, I can just go straight into my 'inbox' folder but does anybody know how to stop this from happening?

Let me know, it would be appreciated

Jon
 

A:Outlook Express 6 main page problem

Jon
Here is an article from the newsgroups that tell you how to adjuct the message count for XP.
"Doug Knox MS-MVP" <[email protected] wrote in message
news: [email protected]..
To reset the message count, click Start, Run and enter REGEDIT

Navigate to:

HKEY CURRENT USER\Software\Microsoft\Windows\CurrentVersion\UnreadMail

Look in the subkey for each e-mail account. The value you're looking is MessageCount

Double clickthe MessageCount entry and set the value to 0.

To disable this option completely visit my web site,
www. dougknox. com and go to the Win XP Fixes section. Follow the link for Disable/Enable Unread Message Count

--
"Do not Panic! Your password is correct. It just looks wrong!" - MS-MVP
KellyClick to expand...

Link to article Here

Let us know if that helps or if you need help in using regedit.

Dave
 

Read other 1 answers
RELEVANCY SCORE 40.8

ComboFix 10-06-07.03 - mungo_test1 06/07/2010 22:29:31.1.2 - x86Microsoft Windows XP Professional 5.1.2600.3.1252.1.1033.18.1014.469 [GMT -4:00]Running from: c:\documents and settings\mungo_test1\Desktop\ComboFix.exeAV: Symantec AntiVirus Corporate Edition *On-access scanning enabled* (Updated) {FB06448E-52B8-493A-90F3-E43226D3305C}.((((((((((((((((((((((((((((((((((((((( Other Deletions ))))))))))))))))))))))))))))))))))))))))))))))))).c:\documents and settings\ebergofsky\Local Settings\Application Data\syssvc.exe.((((((((((((((((((((((((( Files Created from 2010-05-08 to 2010-06-08 ))))))))))))))))))))))))))))))).2010-06-07 21:52 . 2010-06-07 21:52 -------- d-----w- c:\documents and settings\ebergofsky\Application Data\Malwarebytes2010-06-07 21:29 . 2010-06-07 21:29 -------- d-----w- c:\documents and settings\mungo_test1\Application Data\Malwarebytes2010-06-07 21:29 . 2010-04-29 19:39 38224 ----a-w- c:\windows\system32\drivers\mbamswissarmy.sys2010-06-07 21:29 . 2010-06-07 21:29 -------- d-----w- c:\program files\Malwarebytes' Anti-Malware2010-06-07 21:29 . 2010-06-07 21:29 -------- d-----w- c:\documents and settings\All Users\Application Data\Malwarebytes2010-06-07 21:29 . 2010-04-29 19:39 20952 ----a-w- c:\windows\system32\drivers\mbam.sys2010-06-07 05:43 . 2010-06-07 05:43 -------- d-----w- c:\documen... Read more

A:combofix log with AV Security suite the main problem

Hello and welcome to Bleeping ComputerWe apologize for the delay in responding to your request for help. Here at Bleeping Computer we get overwhelmed at times, and we are trying our best to keep up. Please note that your topic was not intentionally overlooked. Our mission is to help everyone in need, but sometimes it takes just a little longer to get to every request for help. No one is ignored here.If you have since resolved the original problem you were having, we would appreciate you letting us know. If not please perform the following steps below so we can have a look at the current condition of your machine. If you have not done so, include a clear description of the problems you're having, along with any steps you may have performed so far.Upon completing the steps below another staff member will review and take the steps necessary with you to get your machine back in working order clean and free of malware.If you have already posted a DDS log, please do so again, as your situation may have changed.Use the 'Add Reply' and add the new log to this thread.Thanks and again sorry for the delay.We need to see some information about what is happening in your machine. Please perform the following scan:Download DDS by sUBs from one of the following links. Save it to your desktop.DDS.scrDDS.pifDouble click on the DDS icon, allow it to run.A small box will open, with an explaination about the tool. No input is needed, the scan is running.Notepad will open with the results.Foll... Read more

Read other 2 answers
RELEVANCY SCORE 40.8

I've been having problem the past 2 weeks with BSOD. I've run Prime95 for like 2h, no BSOD and the temp is around 75C, I've done some chkdsk on all of my drives. Have one SSD and four HDDs.
I've also run memtest86. First time I got one errr after pass 1 finished and started with pass 2. The test had run for like 2hrs. Then I pulled out one of the RAM(the one closest to the HDD cage), ran the test again for 2,5 passes(2-3hrs), no errors. Ran the RAM I pulled out, same length, no errors. Put the other three back in and ran the test over night for 8hrs, no errors.(??) I think it was around 5-7 passes. Under computer properties it was Installed RAM: 16GB (15,9GB usable)

But I still had problems. Reinstalled Windows 7 Enterprise, installed all the Windows updates and the drivers from Gigabytes webpage, this time without the EasyTune etc.
I also have simple programs like: uTorrent, Minecraft Server, Mumble Server, Wampserver, Plex Media Server and Filezilla Server on it. So no random programs etc.
Still got problems. I've tried to reset BIOS, didn't help. I have changed from IDE to AHCI in the BIOS(cause I have SSD). When I come home today I will try to pull out two RAM and see what happens, if that doesn't help, I will try to run with the two I pull out. I will also try to disconnect the HDDs and only have the SSD plugged in.
I will try to update BIOS too. If none works I will reinstall Windows again and dont install ANYTHING and see what happens. Any ideas? I... Read more

A:BSOD -ntoskrnl.exe main problem file

Here comes my dumps: https://dl.dropboxusercontent.com/u/...6_17283367.rar
(Download link don't work for some reason. Check the atteched files further down the thread.)

Does it matter that I use my computer via Remote Access from my main computer? That shouldn't be an issue.

Got a BSOD now when I got home.
This time is was the files: ntoskrnl.exe, tcpip.sys and win32k.sys.

Took out 2 of 4 RAM slots and will see if it BSODs anything. The RAMS are at 1600mhz atm. Shall I change back to 1333mhz?
Under Computer Properties it says: Installed RAM: 8GB (7.88GB usable)

I also use Classic theme on the dekstop. Not the Areo.

EDIT: My Samsung 840 EV 120GB SSD have the latest firmware and the chkdsk didn't show any problems what I could see and Samsung Magician showed that the disk is healthy so I don't think is the SSD anyway.

Atm I'm running with 2x4GB RAM and trying to see if the system is stable. If not, I will try the other two sticks in the meantime you guys look at the dump files.

While the system is running I checked the Event Viewer in Windows under Custom Views->Administrative Events and found these Errors:
Unloading the performance counter strings for service WmiApRpl (WmiApRpl) failed. The first DWORD in the Data section contains the error code.

The performance strings in the Performance registry value is corrupted when process Performance extension counter provider. The BaseIndex value from the Performance registry is the first DWORD in the Data section, LastCount... Read more

Read other 9 answers
RELEVANCY SCORE 40.8

Hi, I have been experiencing major slowdowns and have run all necessary programs and I have Smart Security ESET/NOD32, and used all anti-spyware programs recommended. I myself looking at the log from previous experiences see some things that may be spyware, please help in confirming and making my decision. Here is my HJT log:

Logfile of Trend Micro HijackThis v2.0.2
Scan saved at 10:46:25 PM, on 10/04/2008
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v7.00 (7.00.6000.16640)
Boot mode: Normal

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
c:\program files\common files\logishrd\lvmvfm\LVPrcSrv.exe
C:\WINDOWS\arservice.exe
C:\Program Files\Bonjour\mDNSResponder.exe
C:\WINDOWS\Microsoft.NET\Framework\v2.0.50727\mscorsvw.exe
C:\WINDOWS\eHome\ehRecvr.exe
C:\WINDOWS\eHome\ehSched.exe
C:\Program Files\Common Files\LightScribe\LSSrvc.exe
C:\WINDOWS\system32\nvsvc32.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\system32\dllhost.exe
C:\WINDOWS\system32\wscntfy.exe
C:\WINDOWS\ehome\ehtray.exe
C:\WINDOWS\RTHDCPL.EXE
C:\WINDOWS\ARPWRMSG.EXE
C:\WINDOWS\System32\svchost.exe
C:\Program Files\HP DigitalMedia Archive\DMAScheduler.exe
C:\WINDOWS\eHome\ehmsas.exe
C:\Program Files\HP\HP Software Update\HPwuSchd2.exe
C:\WINDOW... Read more

A:Unsure of Main Problem, Am Positive that I have various Problems

Bump Please

Read other 1 answers
RELEVANCY SCORE 40.8

yesterday may 26 my internet was working fine, but when i came home and tried to get on the internet wouldn't work. NO ip, no subnet mask, default gateway or anything. my laptop and main PC are connected to the same network and i have to do this from my laptop and it still works on the internet from here. the main PC says connected: 100mpbs 0 packets sent and received and again no address type no IP address no subnet mask no default gateway and NO internet connection so if you know what the problem is please help
 

A:Solved: Can't connect to internet on main PC

Read other 13 answers
RELEVANCY SCORE 40.8

My ISP is sending me two ethernet over powerline adaptors with a new service they have started. It needs an etehrnet connection which is very close to where I have a switch so I don't need to use the powerline adaptors for their intended use.

Instead I want to use them in replacement of the wire that currently runs between my router and my switch (switch is the only thing plugged into the router), what is the usual speed of these ethernet over powerline adaptors?

Also are they usually reliable enough to use as the internet backbone of my network?

Thanks
Jack
 

A:Solved: Main power networking

Read other 6 answers
RELEVANCY SCORE 40.8

XP always reverts back to "main/First" page after 10 minutes or so. I am using a screen saver, and it works fie, comes on in Apx 8 Minutes. How can I disable XP from reverting back to it's main page. i.e I want it to stay ON, even though I may not be using at the time.
Thanx,
Nick G.
 

A:[Solved] XP Main Page Reversion

Read other 11 answers
RELEVANCY SCORE 40.8

my friend want to buy a new pc , but he dont want to buy a display for it, want to use it with his lcd tv. I havent seen that LCD's pin connections .(ONIDA 26LM100F). It has one DVI ,and one "D-sub" (is that VGA?) a blue female type connector with 15 pins.

my question is can he connect his pc with that lcd ? need any adaptors? what kind of cables? how to check that connectors are working fine without connecting to a pc?
 

A:Solved: connect LCD TV to PC as main display

There are two types of monitor plug, DVI and D-sub and the lcd tv has it. Definitely you can!
 

Read other 2 answers
RELEVANCY SCORE 40.8

Winamp is only appearing as a shortcut on my Vista taskbar and the
playback settings are appearing on IE7.

Other than that, I cannot get the main console of Winamp to open up?

(it was opening fine yesterday)
 

A:Solved: Winamp - how do I get to the main console?

any takers on this one?
 

Read other 3 answers
RELEVANCY SCORE 40.4

Already found the wayout of thi problem!
Problem with Iexplorer main page,always open(http://213.159.117.134/index.php) !Yee I now this is most often problem,but i need help with it,and regedit dosn't help with it!May be i'm doing something wrong or not doing something! Adware dosnt help!

Logfile of HijackThis v1.97.7
Scan saved at 16:33:25, on 2004.10.17.
Platform: Windows 2000 SP2 (WinNT 5.00.2195)
MSIE: Internet Explorer v6.00 (6.00.2600.0000)

Running processes:
C:\WINNT\System32\smss.exe
C:\WINNT\system32\winlogon.exe
C:\WINNT\system32\services.exe
C:\WINNT\system32\lsass.exe
C:\WINNT\system32\svchost.exe
C:\WINNT\system32\spoolsv.exe
C:\Program Files\AVPersonal\AVGUARD.EXE
C:\Program Files\AVPersonal\AVWUPSRV.EXE
C:\WINNT\System32\svchost.exe
C:\FaxE_Run\FaxECtrl.exe
C:\WINNT\system32\regsvc.exe
C:\FaxE_Run\FaxEPrnt.exe
C:\WINNT\system32\MSTask.exe
C:\FaxE_Run\FaxEPurg.exe
C:\FaxE_Run\FaxERecv.exe
C:\FaxE_Run\FaxEStat.exe
C:\FaxE_Run\FaxEScdr.exe
C:\FaxE_Run\FaxEDisp.exe
C:\WINNT\System32\WFXSVC.EXE
C:\WINNT\System32\WBEM\WinMgmt.exe
C:\Program Files\Symantec\TalkWorks\WFXMOD32.EXE
C:\WINNT\Explorer.EXE
C:\WINNT\System32\wfxsnt40.exe
C:\WINNT\System32\atiptaxx.exe
C:\WINNT\System32\systime.exe
C:\WINNT\System32\internat.exe
C:\WINNT\System32\systime.exe
C:\Documents and Settings\Administrator\Application Data\tacr.exe
C:\Program Files\Symantec\TalkWorks\WFXCTL32.EXE
C:\TYPSoft FTP Server\ftpserv.exe
C:\Program Files\AVPersonal\AVG... Read more

Read other answers
RELEVANCY SCORE 40.4

I have a Compaq Presario which has a fresh install of Windows 7 (legit). All was fine until I was playing a game on Facebook and when I went to play it again one day it wouldn't load properly to the game. I saw a popup prompting that to play games you might want adobe flash player installed but I am fairly sure I installed that when I installed windows7. I am normally very thorough but I tried to reinstall it anyway since it wouldn't or shouldn't hurt.
 
I then found that it wouldn't follow all the way through on the install. Partway through the install I get a popup saying "Installation encountered errors. Actionlist not found."
 
I am also getting messages almost everytime I try to go to a website. I get a screen message that the site is dangerous and I have to agree to an exception in my security to get there. I never set my security that high or like that. It has done that on it's own. I am trying to find where to lower the sensitivity but have had no luck so far.
 
Sometimes when I left click on a link or anything on the webpage that requires a left mouse click it does not accept it. I know that there is nothing wrong with the mouse. I have tested and confirmed it.
 
Does anyone know what might me happening. My Avast virus scan shows nothing. I have Tune up Utilities and it fixed all problems it found but no help and also I am having problems with windows update. Please help if you have ideas about what is going on. Everything was fine until I put the... Read more

A:Main Problem is Windows 7 not allowing updates or installs

You can adjust your security setting from 'Control Panel / Internet Options / Security' but it is possible you have picked up a malware infection. I would advise that you download Malwareytes from here :
 
Malwarebytes Anti-Malware

 
and run it as per its instructions. If this shows anything that you cannot confidentally deal with yourself, or that Malwarebytes cannot deal with on your behalf, you should post baqck here but in the 'Am I infected' section.
 
Chris Cosgrove

Read other 2 answers
RELEVANCY SCORE 40.4

I have a hard drive that comes with my PC and that has a corrupted Windows, but the boot.ini still works fine. So I got a new hard drive and installed a new fresh copy of Windows XP on it. So now I want to format the old hard drive and use the new hard drive as the boot drive. However, if I removed the old hard drive, the new hard drive doesn't boot at all. I've tried using the FIXMBR, FIXBOOT, and BOOTCFG /REBUILD commands, but I think I did it wrong.

Thanks,
Dwh12
 

A:Solved: Changing the Main Boot Drive

Read other 6 answers
RELEVANCY SCORE 40.4

Here is the situation. My customer called me and said his computer keeps booting in an endless loop. I suspected a corrupted master boot record. I went to his house, booted up into the Recovery Console, did memory checks and such, and did a FIXBOOT command. Well, this did nothing for me except give me some typing practice. I noticed too that I can't get it to boot into SAFE MODE.

When I rebooted it, it came up with the infamous "NTLDR IS MISSING - PRESS CTRL-ALT-DEL TO RESTART". And then it gets really exciting!! I tried rebooting again and got the BSOD 0x0000007f error. Well, I did all of the normal processes of elimination by removing one RAM module at a time (but memory already checked good so it was more of a second check than anything else) and disconnected one CD/DVD drive, although since I worked on the hard drive last, it just makes sense that something went awry on the hard drive.

Moving right along, I removed the hard drive and connected it to my Linux laptop (gotta love Linux!!!) and Linux sees all of the folders and files. I think something got messed up in the boot sector but now all I can get is a constant BSOD. Let me just clarify one point I left out above....the BSOD appears when I try to boot from the Windows XP disc in an attempt to get back into the Recovery Console. I think that perhaps the FIXBOOT and FIXMBR commands jacked up some pointers and now the processor doesn't know where to look so it stops.

I say all that to ask this: Is ... Read more

A:[SOLVED] BSOD due to main hard drive

Hi Mike, you know I've been seeing this kind of thing alot lately. It ususally ends up being just like you said a totally messed up boot record. Now how this comes to be I really haven't found out yet, although I suspect some sort of a Win update, 3rd party service conflict that is occuring to all these computers. Although you may very well be able to resolve this without a reinstall, since you are able to recover the info with linux, the easiest fastest way to fix this persons computer is going to be to get the data, use kill disk to wipe the drive and do a format and re-install. Believe me the client will thank you since the computer will most likely work better than ever. If you need a link to download killdisk just let me know. I'm sorry I don't have a better fix for you, but I have tried everything else with this problem and as I said this was always the easiest fix.

Let Me know if I can help further.

Reguards
Patmark

Read other 3 answers
RELEVANCY SCORE 40.4

I really hope someone out there can help as I have absolutely no idea what to do! My kids have been playing on the computer and now my screen saver, main menu buttons etc are upside down! Everything works perfectly fine you just have to tip the screen into a "portrait" position to do anything. I have tried turning off and unplugging but to no avail. We have a standard uk keyboard as apposed to a querty french keyboard and I suspect a button has been pressed somewhere! Hope someone out there has had a similar problem and can help. I am not very technical so would really appreciate answers in very plain computer speak! Thanks very much.
French Fancies
 

A:Solved: Please help! Screensaver and main menu upside down!

Read other 11 answers
RELEVANCY SCORE 40.4

Hi,

Is there a way to set the main Windows font on Windows XP?
I think it currently uses Arial, and I want it to use Lucida Grande (which I have installed) for folders' names, Windows' titles, etc...
 

A:Solved: Changing Windows' main font?

Check out http://articles.techrepublic.com.com/5100-10878_11-6184922.html

BUT, you may run into trouble when you want to change it back.
 

Read other 2 answers
RELEVANCY SCORE 40.4

Have an input form containing a subform. Subform is linked to main record via a unique registration #. Subform contains $ amounts that I want to sum and display on the main form. I've tried using expressions like "Forms![HowPaidSubform]![TotPaid]" on the main form, but all that displays is "#Name".

How can I do this?
 

A:Solved: Move sum from subform to main form

Read other 7 answers
RELEVANCY SCORE 40.4

I currently have a wireless network set up at home which I connect to with a PC and 2 laptops. The PC runs XP and the laptops Vista.

I cannot connect to the internet on the main PC but have no problems on the laptop.
I have looked on various help websites and run the IPCONFIG/ALL tip. All info looks to be correct with IP address as usual.

Can anyone give me advice as to how to fix this?
 

A:Solved: Network connected but no internet on main PC

Read other 16 answers
RELEVANCY SCORE 40.4

On my secondary computer, when I first got it, already had the Get Windows 10 app on the taskbar. I updated to 10 on that computer and I am really liking it, so much in fact that I want it on my main computer. But apparently, the last time I updated the thing was in 2013 (oops). I installed all the updates, but the Get Windows 10 app is not showing up, and none of the guides online of how to get it are working for me. Is it still possible for me to upgrade? This computer is more powerful than the second computer, so it really should have no problems. Here are the specs:

Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: Intel(R) Core(TM) i5-2410M CPU @ 2.30GHz, Intel64 Family 6 Model 42 Stepping 7
Processor Count: 4
RAM: 7970 Mb
Graphics Card: Intel(R) HD Graphics 3000, -1860 Mb
Hard Drives: C: Total - 407006 MB, Free - 256921 MB;
Motherboard: ASUSTeK Computer Inc., K53E
Antivirus: Microsoft Security Essentials, Updated and Enabled
 

A:Solved: Unable to download W10 on main computer

Read other 16 answers
RELEVANCY SCORE 40.4

Hi everyone

I have a computer at work with all the information I need. I would like to be able to access this from home on my laptop. Whats the best way for me to do this? I have wireless on my laptop.

Thank you in advance.

Littleme
 

A:Solved: Accessing main computer from Laptop

What version of Windows is on each PC?

How does your work laptop connect to the internet? (if its via a local network, which then connects to the inetrnet via a router there will be firewall issues)

How does your home PC connect to the internet?

Does "your work" actually permit a remote connection (and how do they manage the implied security issues if they do?)
 

Read other 3 answers
RELEVANCY SCORE 40.4

Hi, I have been through all the threads and I cannot seem to find one that is similar to mine. I had a network that was working fine, and now suddenly my main computer has disappeared from the network. It just suddenly happened when I tried to print to the main printer on the network.
I can access the internet on the router and print to my main colour printer that is connected to my computer but when I click "View workgroup computers" I get the following message "Mshome is not accessible. You might not have permission to use this network resource. Contact the administrater of this service to find out if you have permissions. The list of servers for this workgroup is not currently available"
I also cannot print to Acrobat Distiller.
I recently changed from McAfee to Kapersky because McAfee was not able to update and I also ran RegCure. Could either of these things have caused my network to disappear? I also removed Google Desktop Search and then installed it again a week or so later. Sorry if these are dunb questions but I am a real newbie to the way computers work and only know my way around digital image editing!
 

A:Solved: Why has my main computer disappeared from the network?

Hi Everyone, Is my face red! My son suggested that I check if both my Firewalls were turned on, and sure enough - they were. When I turned off the Kapersky one, My Network places magically returned. I hope this helps other newbies like myself.
 

Read other 2 answers
RELEVANCY SCORE 40.4

Hello,
I've been trying to clear out my hard drive of some stuff to free up some much needed space. However, I can't seem to find what it is that's taking up so much space. When I look at what all is on there, nothing seems to add up to the amount that it says is on there. My main drive is 69.6 GB big and it says I have 13 GB free (I know that's low, that's why I'm trying to clear it out of things I don't need on there). The problem is, I have uninstalled and deleted everything I don't need and have the main drive almost down to the essentials and a few other programs I use regularly. It should leave me with almost 30 GB free space, but as I have mentioned, it says I only have 13 GB free. Aside from what I have done, how else can I find out what is taking up all this space? Could it just be that something is wrong with my main drive? Thanks in advance for any help.
 

A:Solved: Main Hard Drive Mystery

Read other 6 answers
RELEVANCY SCORE 40.4

On outlook express, when it first opens, the main window has gone, which has a link to MSN Explorer i think, and says how many unread email messages you have. Is there anyway to get it back, because I liked it better than opening on to a blank white screen, or my inbox. Thanks.
 

A:Solved: Outlook Express main window has gone - please help!

Closing duplicate, please reply here:

http://forums.techguy.org/showthread.php?t=393867

eddie
 

Read other 1 answers
RELEVANCY SCORE 40.4

On outlook express, when it first opens, the main window has gone, which has a link to MSN Explorer i think, and says how many unread email messages you have. Is there anyway to get it back, because I liked it better than opening on to a blank white screen, or my inbox. Thanks.
 

Read other answers
RELEVANCY SCORE 40.4

Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft Windows XP Home Edition, Service Pack 3, 32 bit
Processor: AMD Athlon(tm) II X2 245 Processor, x86 Family 16 Model 6 Stepping 2
Processor Count: 2
RAM: 2943 Mb
Graphics Card: NVIDIA GeForce 7025 / NVIDIA nForce 630a, 512 Mb
Hard Drives: C: Total - 238472 MB, Free - 3959 MB; E: Total - 476937 MB, Free - 273517 MB; F: Total - 953867 MB, Free - 865347 MB; G: Total - 476929 MB, Free - 427039 MB;
Motherboard: ASUSTeK Computer INC., M2N68-AM Plus, Rev X.0x, MS1C96B07804918
Antivirus: avast! Antivirus, Updated: Yes, On-Demand Scanner: Enabled

This PC is attached to a network containing several desktops and laptops running Vista. The Samsung laser printer ML-2240 is attachde by USB to this XP PC. Printing over the network operates perfectly with all other PCs. I have just purchased an Acer laptop with Windows 7 and followed the instructions for file sharing, which works perfectly. I have followed the instructions for installing the printer, and received confirmation that it is installed. However, when I attempt to print out of Word 2007 and press the button "find printer" in the Samsung printer profile I get the message "Active Directory Main Services is currnely unavailable". I see that this has been found over the years by many people! I am looking for a solution in my context. The rest of the network operates fine still and I can edit the same Word file over the network and print fine.... Read more

A:Solved: Active Directory Main Services

Read other 7 answers
RELEVANCY SCORE 40

have been having a long running problem with not being able to connect to Microsoft downloads, and I cannot update my computer. It been going on for about 6 months now, and I have tried many many trouble shooting steps, and cannot resolve the problem. I think there many be a virus or trojan that my avast cannot get rid of. I have some problems with redirecting on firefox, this problem used to be worse, but has gotten better since I got avast. But nothing I have tried has fixed my inability to update or connect to microsoft downloads.

DSS.txt

DDS (Ver_09-12-01.01) - NTFSx86
Run by Jessie at 14:58:36.44 on Sun 02/28/2010
Internet Explorer: 7.0.6001.18000 BrowserJavaVersion: 1.6.0_15
Microsoft? Windows Vista? Home Premium 6.0.6001.1.1252.1.1033.18.2038.872 [GMT -6:00]

SP: Windows Defender *enabled* (Updated) {D68DDC3A-831F-4FAE-9E44-DA132C1ACF46}

============== Running Processes ===============

C:\Windows\SYSTEM32\wininit.exe
C:\Windows\system32\lsm.exe
C:\Windows\system32\svchost.exe -k DcomLaunch
C:\Windows\system32\svchost.exe -k rpcss
C:\Windows\System32\svchost.exe -k secsvcs
C:\Windows\System32\svchost.exe -k LocalServiceNetworkRestricted
C:\Windows\System32\svchost.exe -k LocalSystemNetworkRestricted
C:\Windows\system32\svchost.exe -k netsvcs
C:\Windows\system32\SLsvc.exe
C:\Windows\system32\svchost.exe -k LocalService
C:\Windows\system32\svchost.exe -k NetworkService
C:\Program Files\Alwil Software\Avast4\aswUpdSv.exe
C:\Program Files\Al... Read more

A:Main Problem: Cannot update windows or connect to download.microsoft.com

Hello and Welcome. Please subscribe to this thread to get immediate notification of replies as soon as they are posted. To do this click Thread Tools, then click Subscribe to this Thread. Make sure it is set to Instant Notification, then click Subscribe.

Before beginning the fix, read this post completely. If there's anything that you do not understand, kindly ask your questions before proceeding. Ensure that there aren't any opened browsers when you are carrying out the procedures below. Save the following instructions in Notepad as this webpage would not be available when you're carrying out the fix.

It is IMPORTANT that you don't miss a step & perform everything in the correct order/sequence.

---------------------------------------------------------------------------------------------

One or more of the identified infections is a backdoor trojan.

This type of infection allows hackers to remotely control your computer, steal critical system information and download and execute files without your knowledge.

If you do any banking or other financial transactions on the PC or if it should contain any other sensitive information, please get to a known clean computer and change all passwords where applicable, and it would be wise to contact those same financial institutions to apprise them of your situation.

You can read this: How Do I Handle Possible Identify Theft, Internet Fraud and CC Fraud?

--------------------------------------------------------... Read more

Read other 13 answers