Over 1 million tech questions and answers.

Monitor generates a red pixel after some time

Q: Monitor generates a red pixel after some time

Hey! I have a strange issue, I couldn't find anything like this. So I bought a Samsung S24D300 a few weeks ago. It works well, didn't have any pixel problems etc. But yesterday I noticed that after some time (let's say around 1 hour after turning it on), it generates a single red stuck pixel, which is only visible on black background. But, after I turn it off for 10 minutes, it disappears. And as I see, it becomes brighter and brighter, still not that big deal (at least I will turn it off more often), but it annoys me, as my previous B300 also had a blue stuck pixel, and I cannot return it now. What can cause this? I will try running JScreenFix and other softwares after it appears, however it does not disappear if I massage it gently. Has anybody had any problems like this? Thank you.

EDIT: now I didn't have the problem for hours, then I started Skyrim, and the red pixel appeared immediately.

RELEVANCY SCORE 200
Preferred Solution: Monitor generates a red pixel after some time

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Monitor generates a red pixel after some time

Help !!! i have the same problem ...same model....

Read other 3 answers
RELEVANCY SCORE 67.6

I'm using a Lenovo laptop with integrated intel graphics, I'm also using an Acer B223W attached as an external display. There is an issue with the monitor where there is a four inch black bar running down the right side. Basically the display is shifted four inches to the left, leaving me with four inches of unusable monitor real estate on the right. I've trouble shot it, to no avail and the monitor's display settings only allow me to shift the monitor's display an inch or so. I need something like catalyst control center that will allow me to shift the monitor's picture as much as I'd like. Any ideas?

TL;DR

I need a piece of software that will allow me to shift my monitor's display pixel by pixel. I have integrated intel graphics.
 

A:I need software that will allow me to adjust my monitor's display pixel by pixel.

Read other 7 answers
RELEVANCY SCORE 54

Is there any possible way images viewed on an LCD monitor can be 'stored' in the pixels and then recovered?

I returned a monitor that I had been using for a few days because it had stuck pixels. This is more of a security concern but I thought it would fit in the hardware section.

Thanks for the help!
 

A:Monitor pixel 'memory'?

You are fine..nothing to worry about..A pixel doesn't store anything.
pixel memory refers to a color or image being viewed a long time..and then the pixels may not perform 100 percent true for a short time after the prolonged image or color is not longer being viewed..
An example is a web page with a bright dark color...when you go to another page after ...the page is a bit funny for a short spell
 

Read other 1 answers
RELEVANCY SCORE 54

Hi. I own a 17" LCD Monitor and I have been noting during the past few months that it appears that one pixel in the center of the screen is either missing, broken, or malfunctioning part of the time. I believe it isn't there because when the screen is black, this one tiny pixel stays white which is in the middle of the screen. Its like it does not work. Are there any ways of repairing this without having to pay tons of money? Any other advice about this topic will be greatly appreciated.
 

A:Pixel missing in LCD Monitor???

Read other 9 answers
RELEVANCY SCORE 54

This was sent to me by my mom. It's a picture of a patch of pixels on the monitor. She said this lady's computer has had a new hard drive installed.
I figured something video card related was knocked loose during the work?
Any thoughts?
 

A:Pixel patch on the monitor

There is no way that's a defect in the video card or the monitor; its too specific and regular.
I think its a window opened by some task running on the PC. Does it happen if you reboot into safe mode?
 

Read other 2 answers
RELEVANCY SCORE 54

a black patch appears on right bottom corner and it spreads horizontally through the screen. i have change the screen three times at service centre .this is not due any mechanical pressure . if there can b any other reason i dont know. please help please.

Read other answers
RELEVANCY SCORE 54

Hi,

I am using 2 27' LED displays on my PC. One has RGB sub pixel, the other has BGR sub pixel.

I have problem to tune the font using Cleartype. I have tried to tune all displays a few times and always get the following result.
If I use the RGB one as the primary display, the font on the RGB display looks ok but the font on the BGR display looks weird after tuning using cleartype.

If I use the BGR display as the primary, the font on the BGR display looks ok but the font on the RGB display looks weird after tuning using cleartype.
Basicly, the after tuning with Cleartype, the font on the Primary display looks good but on the other looks weird.


I have also tested with single display setup. i.e. connect only the RGB sub pixel display or the

BGR sub pixel display.
ClearType tuning works well for single display setup no matter which display I have connected.
But once I connect the 2nd display and tune using Cleartype, the font on the Primary display looks good but on the other looks weird. (The same as above)

To be more specific, the RGB display is Philips 278C4 (connect using HDMI), the BGR display is Dell P2714H (connect using DisplayPort. I have also tried DVI. DisplayPort or DVI give same result).
My system is Win 8.1 Pro x64 JA-JP with all latest patches installed, and my graphic card is nVidia GTX 760, with the latest driver installed.

I suspect this is due to one display has RGB sub... Read more

Read other answers
RELEVANCY SCORE 53.6

I recently bought a used dell u2212hm on eBay. The seller said it didn't have any stuck or dead pixels, but when I powered it on I saw a black dot on the screen. I have owned multiple devices with stuck and dead pixels before, and the defect on the screen didn't look like one so i was thinking that it might be a scratch or something. Is it a stuck/dead pixel or a scratch and is there anyway I can fix it?
The Defect: 

Read other answers
RELEVANCY SCORE 53.6

Hi i'm looking for any advice for my pc monitor that has a green haze.

I'm using a lg e2251vr 21.5 inch monitor, and a dell laptop with windows 7 using

I have had it for 2 days, first day i hooked up my ps3 via a hmdi to dvi cable and the picture was perfect, second morning i tried connecting up my laptop screen to try out the dual screen feature (still using hdmi output on laptop to dvi input on monitor), and the screen showed this green haze. Now its always present even when i hook it up to my ps3. or without any connection.

I know i can send it, back but the distributor was a pain in the *** with shipping, so i'm looking for a quick fix or any advice if possible.

Thank you
 

A:Green pixel Haze on new PC monitor.

You sure the cable isn't bend. I had that awhile ago. Was a total pain.
 

Read other 1 answers
RELEVANCY SCORE 53.6

Hello guys, I'm having a strange problem, I have a P1 Pro Express Dual LG laptop, and there is a colored pixel dots on my monitor, sometimes they are flashing and changing location every second, and sometimes they are standing still, It's just odd.

My computer also crushes a lot and it seems like the colored dots is the source to all of my problems.
Of course I can take my computer to a technician and fix it, but maybe there is a possible solution I can try before wasting money.
Or perhaps, if there is no solution, what might be the problem (heat, video card, etc.)?
If you need any additional information in order to help me find a solution, just say.

Thanks,
Yours sincerely, Mike.
 

A:Colored pixel dots appear on monitor

Hello Mike,
sounds like a video driver problem. Do the dots take some time to appear or do they show right away? How long has this laptop had this trouble?
 

Read other 5 answers
RELEVANCY SCORE 53.6

Purchased a HP 25er monitor as a second screen for my laptop and has worked fine for a few weeks. Went to turn it on and there are heaps of red and teal dots on the screen (they change position depending whats on screen). Restarted the laptop and updated drivers but they remain. should not happen when it was purchased less than a month ago. Any suggestions how to fix? Or just send it back and get a new one?

Read other answers
RELEVANCY SCORE 53.6

I got a new LG Flatron W2242S LCD monitor yeasterday and last night I saw that it had a stuck pixel o this morning I called the company who sold it to me - www.ebuyer.com - to return it, but they told me that anything up to 3 white stuck pixels, 7 stuck coloured pixels or 3 dead pixels was allowed before they or LG would accept that the monitor is faulty!

I've tried the tapping and rubbing methods but neither had any effect, and I have a program running on it now flashing waves of colours on the screen, but it also hasn't had any effect.

Ca anyone help me out? I don't know what else I can do, beyond actually trying to break some of the pixels so that ebuyer will have to take it back.
 

A:Brand new monitor with stuck pixel

Thats probably your best bet, but don't make it look to obvious, its just the luck of the draw for those failure monitors. Have had a couple screens like that.
 

Read other 2 answers
RELEVANCY SCORE 53.6

I just bought a new Samsung monitor and it has 1 stuck pixel. I tried applying pressure to it and it didn't do anything.
 

A:Stuck red pixel on Samsung monitor

Did you apply pressure during a full power on/off cycle?
I don't know if that still works, It's been years since I have tried it. If captaincranky finds this thread, He probably knows the best remedy or things to try....he's a bit of a monitor expert.
 

Read other 4 answers
RELEVANCY SCORE 52.8

Hello all, A few days ago I received a brand new HP Envy that I purchased directly from HP. I have discovered that it has what appears to be one dead pixel in the monitor. I say "what appears to be" because upon very close inspection it looks like maybe an adjacent pixel is not as bright as it should be. Or perhaps this is just a trick of the light, the "deadness" of the one dead pixel creeping over and influencing how the adjacent pixel is perceived? If I had to bet my life on it I'd say it is just a single dead pixel... but the point is that it may be two. Apparently this is important because if two pixels next to each other are defective, then my warranty would allow me to exchange the computer for a new one (correct?), whereas if it's just a single dead pixel then the warranty wouldn't cover it. BUT is it also possible that I could return it anyway, since it's a brand new computer that arrived with the defect? I have looked online and in some places the internet pundits make it seem as if HP will allow returns for whatever reason as long as they are initiated within 21 days. All of that being said, if anyone can tell me what my options are, I would very much appreciate it. I enjoy the computer very much so far, but this dead pixel(s) thing does bug me slightly.

A:Options for dead pixel in monitor of new HP Envy

dashonb Hello;Allow me to welcome you to the HP forums!Sorry, but this is just a community self-help forum staffed by volunteers. HP maintains no official presence here and we are not authorized to deal with warranty or equipment replacement issues.For these issues, you will need to contact HP Customer Support directly. If you live in the US or Canada, contact information is on this page: http://www8.hp.com/us/en/contact-hp/phone-assist.html#section1If you live elsewhere, contact information is on this page: http://www8.hp.com/us/en/contact-hp/ww-contact-us.htmlNOTE: After you get through, stay on the line until you are finally able to talk to some one -- it can take a while!If you have trouble finding a phone number, then try: 1 (800) 474-6836Good Luck

Read other 1 answers
RELEVANCY SCORE 52.8

Back in October I started noticing flickering green pixels on dark backgrounds on my screen, the flickering green pixels, when they are present are always in the same place.

The first thing I did was buy a new DVI cable and then I ran it from the monitor to a different DVI port in back of the GPU. The issue seemed fixed but then a day later the intermittent green pixels came back, at that point I totally uninstalled the newer Nvidia drivers I had recently installed using DDU and installed the drivers I never had issues with which were from early 2014. After I did that the problem seemed gone and everything was fine until last month when I replaced my mouse. I noticed my mouse pointer had three black dots following behind it in a horizontal pattern. I then removed the Nvidia drivers from early 2014 and installed the most current Nvidia drivers, I believe they're from the 14th of December. After I did this the three black dots following behind the mouse pointer vanished but a week or two later, the intermittent green pixels came back.

1. The intermittent green pixels do not show up in screenshots, I've taken numerous screenshots of the screen when they are present but in the screenshots they are nowhere to be seen.

2. They're showing up more often lately.

3. They don't seem to show up when if I set the display to a lower resolution or when I'm in the bios screen.

4. The GPU is a Nvidia 450 GTS and it is not overclocked and is usually running at 29c, the fan is runni... Read more

A:Flickering Green Pixel Issue = Monitor Or GPU

Hello and welcome Deviancy now my first thought was the monitor may be going south but in view of the changes around you swapping cables and drivers and the fact that the card is five years old now makes me wonder if the card is going south.

Have you access to another monitor to see if the same thing happens?

Second it may as well to test that card with this FurMark: VGA Stress Test, Graphics Card and GPU Stability Test, Burn-in Test, OpenGL Benchmark and GPU Temperature | oZone3D.Net now this can put a fair bit of stress on the card so best run when you are nearby to check things like temps etc.

Read other 1 answers
RELEVANCY SCORE 52.4

Hi I have this monitor for a few months. So dell is blind ? Or what is the reason for doing nothing with the problem with this monitor?
PIXEL INVERSION https://www.youtube.com/results?search_query=dell+s2716dg+pixel
COLORS MUST BE CALIBRATED ON Nvidia panel why ??
And look at attach when I start every game i have on black screen something like this its a milkyway ?
I must send it to service ?

GUYS I PAY YOU ABOUT 800 BUCK FOR THAT !
[url=http://ifotos.pl/z/aanxqsn/][img]s2.ifotos.pl/.../url]

Read other answers
RELEVANCY SCORE 52.4

Hi,

This is a difficult problem to describe so have provided a screenshot attachment. I have been using the same setup for a year now and this has only just started happening.

I am getting a strange pixel-effect on my monitor, almost like a low bit-rate ghosting effect. If this happens on the desktop I can "refresh" the screen and the effect disappears. Sometimes (in browsers is when I've noticed this) the screen starts pixelating (low bit effect) and then just goes insane and the whole screen is effected and usually sends my monitor to sleep and kinda keeps waking up and I'm forced to hard reset the PC (as I can't even use the Start->Restart function.

Its driving me quickly insane so I hope someone can give me some ideas...

Thanks in advance,

DarkKman

NB: See attached
 

A:Solved: LCD Monitor throwing strange pixel effects at me...

Read other 10 answers
RELEVANCY SCORE 52.4

I have a light blue stuck pixel on a dell monitor. How do I saftly attempt to
repair it. The pix is not black so I think it is not dead.

An online program called JScreenFix will make the blue dot faid out after 1 hour for a period of time. After I leave the monitor off for 24 hours the blue dot comes back. So it must be a stuck pixel?? Some times it comes back on it own when the monitor is on. Maybe I should try JScreenFix for a longer period of time. How long is good.

Applying pressure does not work but I don't know how much pressure I should
apply. I have been using a pencil erase head cut into a dull point.

PDpixel does not work. Only JScreenFix does the job on a temporary basis.
With PDpixel I don't know what interval settings should be used.

Any suggestions, I really don't want to give up??
 

A:Repairing a stuck pixel on a dell monitor? Don't want to give up.

Are you the same one who said it didn't bother you? I've heard of the "massage" (rolling pressure in the area at and just around the dead pixel) method but it's rate of success is apparently very low. How much pressure is too much? Well if you kill more pixels, that will be too much.

I put up with a dead pixel on a monitor for about a month and then my solution was to replace the monitor.
 

Read other 2 answers
RELEVANCY SCORE 51.6

Hello,

I have that blue vertical line that appears only on dark pixels, it's about 80% screen height starting from the bottom,My monitor is Samsung syncmaster 300 LED, and I'm running windows 7 64bit.

I've connected my laptop into the monitor and the line persists, it's probably a screen problem, but I wonder if there's anything to try on my part.also the mouse pointer covers that blue line but I guess that's only because my pointer is white and that line does not appear in the dark pixels.

any help would be appreciated.thanks
 

A:Solved: A pixel wide blue vertical line on my monitor

Read other 8 answers
RELEVANCY SCORE 50.8

Hello,
My Dell Inspiron One 2310 - All-in-One is showing Dark Sub-pixel defects (i think, due to black spots in lower region of the monitor).
As the screen is huge, so I was thinking I would reduce the display area to exclude the lower band of 4 centimetres in order to exclude the Dark spots.
How can I reduce the display area inDell Inspiron One 2310 - All-in-One?
I checked out the setup & service manual, but couldnt find instruction to do so.
Please help me out.
Thanks.

Read other answers
RELEVANCY SCORE 46.8

hows it going everyone!? just want to start out by saying I'm a newbie when it comes to computers so i really hoping I'm at the right spot. my laptop died on me recently so i hopped back on my desktop and it was acting really weird it would get some blue pixel lines going any where from half an inch to a few inches long through the screen and it would get to the point where i would freeze and restart/blue screen or anything that was open would flash a bunch of random colors or wouldn't let me access anything on it or it would say something like this program has been disable... then freeze. i use every program out there from spy bot, spy doc, melware bytes to combo fix and i ran them all in till they all said my pc was clean but the problem keep happening i was only able to use my comp in safe made. when i was in safe mode i didn't see a single dark/light blue pixel lines which was really nice then my buddy gave me an extra copy of windows 7 so i reformatted and sadly the lines are still there but its not freezing or glitching out like it did and windows is up to date and I'm stumped i don't know if its a video card problem or a super virus... HELP ME PLEASE!! i might have screwed up on the reformatting because i seen a few programs on my comp still from before like mirc and perfect world on it so i just might reformat it again if we cant figure out the problem.
Thanks
Mike805

A:dark blue and light blue pixel lines on my monitor

Hello,I will be helping you with your problems. Please be patient while I assist you.Some points for you to keep in mind while I am helping you to make things go easier and faster for both of us Please do NOT run any tools unless instructed to do so.
We ask you to run different tools in a specific order to ensure the malware is completely removed from your machine, and running any additional tools may detect false positives, interfere with our tools, or cause unforeseen damage or system instability. Please do not attach logs or use code boxes, just copy and paste the text.
Due to the high volume of logs we receive it helps to receive everything in the same format, and code boxes make the logs very difficult to read. Also, attachments require us to download and open the reports when it is easier to just read the reports in your post. Please read every post completely before doing anything.
Pay special attention to the NOTE: lines, these entries identify an individual issue or important step in the cleanup process. Please provide feedback about your experience as we go.
A short statement describing how the computer is working helps us understand where to go next, for example: I am still getting redirected, the computer is running normally, etc. Please do not describe the computer as "the same", this requires the extra step of looking back at your previous post.NOTE: At the top of your post, click on the Watch Topic Button, select Immediate Notification... Read more

Read other 3 answers
RELEVANCY SCORE 44.8

I loaded Win7 three computers, 2 desktops and 1 laptop. My Dell XPS is the one that keeps flashing a black screen from time to time. It seems like it is thinking for a few seconds but when this happens it is like my monitor turns off.

any ideas?

A:Monitor flashed Black from time to time

Under display adapters in device manager, is your 6800 M listed as the adapter? I ask because I'm sure it has to be a moblle graphic card and requires a specific moble driver inf file. Which you should beable to get from Dell with your service tag. If it is listed as a VGA then you definetly need the proper driver.

Read other 2 answers
RELEVANCY SCORE 44

hi guys i just want to know what is pixel shader and can we increase pixel shader virtually

A:hat is pixel shader and can we increase pixel shader virtually

Pixel shading is what makes computer graphics seem so real. It works on a pixel by pixel basis, determining the lighting, shading, and color of each pixel - bringing infinite possibilities.

If I'm correct, anti-aliasing, anisotropic filtering, etc will affect pixel shading. For ATI, this can be done through Catalyst. NVidia settings should do the same.

Not sure what you mean by virtually...

Read other 1 answers
RELEVANCY SCORE 41.6

hello ive got a hp envy from 2015 and i wish to reset it,but i says (gendannelsesmiljøet blev ikke fundet)no disc came with the computer?????how do i reset it it so???

Read other answers
RELEVANCY SCORE 41.2

Hello,

My Windows 8 pro x64 is installed yesterday, behaves exactly like the old one from one week ago, exactly like the previous installation. If I run "sfc /scannow" my CBS.log is around 90-100 MB in size, it was 160 MB at some point. I am booting from a 60GB SSD if it matters. The system runs fine, I have no errors so the amount of errors reported by sfc is just... weird.

Dism reports every time that everything is OK, no errors found. Chkdsk also says nothing is wrong.
I did everything that was written in the sfc tutorials from within Windows, I ran sfc several times, I exported the log to sfcdetails.log and it has over 60 MB...

I looked into the file and all reported errors are the same type, like the one below with "file is missing" :

Code:
2013-07-25 09:54:06, Info CSI 00000012 [SR] Cannot repair member file [l:24{12}]"1394ohci.sys" of 1394.inf, Version = 6.2.9200.16384, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type = [l:24{12}]"driverUpdate", TypeName neutral, PublicKey neutral in the store, file is missing


Now it's impossible to have the amount of errors reported, something else must be happening here.
Any ideas ?

Thanks.

A:sfc generates 90-160 MB logs

Hello jdaniel,

I totally agree with your logic, your findings, and your conclusion (implied) that sfc /scannow might not be all that it should. Specifically, I have seen many individuals report that "everything is fine" but they are compelled to do a "super-clean" check via running sfc /scannow only to be disappointed that it found many errors. This is why I recommend that users, not having a specific problem, should not run sfc /scannow. With that said, I am running it right now on my perfectly clean test rig. BTW, I looked at your log (briefly) and saw many missing files associated with the AMD architecture. Now, my test rig is an AMD based laptop so let's see what happens. I'll update my thread with my findings and we'll compare notes at that time so hang in ther and I'll be back shortly.

Read other 19 answers
RELEVANCY SCORE 41.2

I frequently run CCleaner with ERASER to clean up my C: drive. When I run RECUVA to see what has been cleaned off the c: drive I often have several ********d01 files that remain at the C:\?\ level. Do you have any idea what these file are? They can?t seem to be opened or deleted.

Thanks,
Snowball

Read other answers
RELEVANCY SCORE 41.2

Hey All!

Does anybody have any idea how to do this? possibly using ms paint? the jpeg will have to contain a date and the users login, so it won't be constant. I need to use this image to 'seal' various word documents and it will have to be inserted with a macro.

Thanks
 

A:creating a .exe that generates a jpg

Ehm...you can try BGinfo...its not *exactly* what you are looking for, but it may benefit you in some way..

http://www.microsoft.com/technet/sysinternals/Miscellaneous/BgInfo.mspx
 

Read other 2 answers
RELEVANCY SCORE 41.2

Does anybody have any idea how to do this? possibly using ms paint?

Thanks
 

A:creating a .exe that generates a jpg

Read other 16 answers
RELEVANCY SCORE 41.2

I frequently run CCleaner with ERASER to clean up my C: drive. When I run RECUVA to see what has been cleaned off the c: drive I often have several ********d01 files that remain at the C:\?\ level. Do you have any idea what these file are? They can?t seem to be opened or deleted.

Read other answers
RELEVANCY SCORE 40.8

I have a logitech mouse that has a smooth scrolling wheel no ratcheting. I wonder if it was possible to set up scrolling to scroll pixel by pixel rather than line by line. Anyone know?
 

A:scrolling pixel by pixel rather than line by line?

I don't know if it can be done or not, but I am certainly curious as to why one would want to do this?
 

Read other 2 answers
RELEVANCY SCORE 40.8

While IE8 is open and I move an XL2007 cell's contents, I get an 'Cannot empty the Clipboard'.

Any fixes? Reinstall IE8?

Thanks

A:IE8 open generates XL error

This error only happens when IE is open. If I close it, no errors. If I have other browsers open, no error.

Ideas would be appreciated.

Read other 8 answers
RELEVANCY SCORE 40.8

Hi folks,
I am not sure exactly when this started to occur, as I mostly use Linux on this box, and it's a while since I tried to install from an exe on the XP part.

When I try to run most installers for applications I get this error.
When I try to run SOME already installed applications (most are okay) I also get this error.

I have no idea what is causing it.
I have tested the ram and it came up okay. I tried to run a checkdsk on C: (which set itself to run on next reboot) but windows failed to boot when it came time.

THE ERROR:
"Access violation at address 004096DA. Write of address 00400000"

Any tool I've tried to install to try and fix it simply creates the same error and thus can't be installed. So my computer is a bit stuck!!

Does anyone have any bright ideas? I would really rather not reinstall Windows, which is about the only fix I can think of.

With thanks,

Jonathan

A:XP generates Access violation with most .exe's

Further information:
This error actually prevents quite a few programs from running. Not sure just how many.
I did not occur when XP is in safe mode. I can install and run programs to my hearts content.
In Safe Mode I have run various tools to clean up / fix the registry. I also ran a tool from http://wiki.djlizard.net/Repair_Permissions to repair registry permissions (in case that was the issue). All of these tools made a large number of changes. I also ran lastest Adaware and that cleaned a couple of minor things up.

Once back in normal boot mode, the problem persists.

I would really like to fix this.

With thanks,

Jonathan

Read other 3 answers
RELEVANCY SCORE 40.8

IE8 and a few other applications have been generating the "Not Responding" messages. I bring up Task Manager to close the failing application, and it to fails intermittantly. When I try to close the failing application(s), it requires several attempts to close the application(s); and at times I will get the not responding message from Task Manager itself. The event log for Applications shows several errors of the 1001 and 1002 codes. When I go to the Microsoft Help website the indication is there is no help for these problems. This condition has been happening for several weeks. Any help provided in solving this problem is appreciated. Thank you.

A:IE 8 generates Not Responding messages.

Did you run virus scan if not then do a scan, if you do not have any Antivirus installed use:

Microsoft Security Essentials - Free Antivirus for Windows

Read other 1 answers
RELEVANCY SCORE 40.8

There is a feature in windows 7 that creates a tutorial for almost any task. It creates the tutorial and highlights what the user needs to click. Can someone please tell me the name of the feature.

A:Windows 7 generates tutorial

The only tutorials that I know about or have used, are from the excellent collection of this forum. I would be interested to see if anyone knows differently

Tutorials - Windows 7 Forums

Read other 7 answers
RELEVANCY SCORE 40.8

Hi all,

I am working on creatign a standalone CA and a subordinate - both servers are Windows Core. I have *.req file generated from the subordinate, copied over to the standalone CA and now and wanted to get the certificate for subordinate.

When running:

certreq -Submit file.req
I only get the *.rsp file. 
However - when running:
certreq -Submit file.req file.cer file.p7b file.ful
I got the *.rsp AND the *.ful file only, not *.cer, no *.pb7 - nuffin.
Question is - what am I doing wrong here?

Read other answers
RELEVANCY SCORE 40.4

Hi all,
I just installed W7 SP1 Pro and updated it using Windows Update. I also installed the ethernet driver. The windows host is in 10.30.0.0/24, along with my linux boxes and my Android phone. Windows can't resolve names, whatever the nameserver is (my local
DNS or 8.8.8.8). Other hosts have no issue whatsoever.
I have perfect connectivity on my local network and can successfully ping 8.8.8.8 at any stage in the following story. My Windows host got its IP via DHCP (10.30.0.15) and I flushed it DNS cache before each step. I also tried once with a fixed address in
the same network, with no better luck at getting DNS replies.
I disabled the firewall on my router and here is what happens;
C:\> nslookup microsoft.com. 8.8.8.8
DNS request timed out.
[...]
tcpdump on my router inbound interface (the one with address 10.30.0.1):
Aug 01 20:03:29.203979 00:26:9e:ae:61:f9 c4:6e:1f:03:ee:4c 0800 80: 10.30.0.15.58706 > 8.8.8.8.53: [bad udp cksum 1a7c! -> e69f] 1+ PTR? 8.8.8.8.in-addr.arpa. (38) (ttl 128, id 2104, len 66, bad ip cksum 0! -> 1837)
0000: c46e 1f03 ee4c 0026 9eae 61f9 0800 4500 .n...L.&..a...E.
0010: 0042 0838 0000 8011 0000 0a1e 000f 0808 .B.8............
0020: 0808 e552 0035 002e 1a7c 0001 0100 0001 ...R.5...|......
0030: 0000 0000 0000 0138 0138 0138 0138 0769 .......8.8.8.8.i
0040: 6e2d 6164 6472 0461 7270 6100 000c 0001 n-addr.arpa.....

Aug 01 20:03:31.218462 00:26:9e:ae:61:f9 c4:6e:1f:03:ee:4c 0800 73: 10.30.0.15.58707 &g... Read more

Read other answers
RELEVANCY SCORE 40.4

Hi Helpful Tech Support Guys,

When I try to get my mail with Outlook, I get a Dr Watson Error:
mapisp32.exe
Exception: access violation (0xc0000005), Address: 0x77f2bd02

System: Windows NT 4.0 Workstation
Outlook 97
Any thoughts or suggestions (other than the obvious, that I need a new OS and Office App ).

Here is the start of the logfile (full file is too long for this space):

Microsoft (R) Windows NT (TM) Version 4.00 DrWtsn32
Copyright (C) 1985-1996 Microsoft Corp. All rights reserved.

Application exception occurred:
App: outlook.dbg (pid=217)
When: 10/1/2002 @ 8:46:38.124
Exception number: c0000005 (access violation)

*----> System Information <----*
Computer Name: MINDTRAVEL
User Name: Administrator
Number of Processors: 1
Processor Type: x86 Family 6 Model 5 Stepping 2
Windows Version: 4.0
Current Build: 1381
Service Pack: 6
Current Type: Uniprocessor Free
Registered Organization: Cosmic Rocket
Registered Owner: Geoffrey I. Maltin

*----> Task List <----*
0 Idle.exe
2 System.exe
20 SMSS.exe
28 CSRSS.exe
34 WINLOGON.exe
40 SERVICES.exe
43 LSASS.exe
68 SPOOLSS.exe
76 Avsynmgr.exe
80 cpd.exe
87 mgasc.exe
93 mgactrl.exe
84 RPCSS.exe
89 PSTORES.exe
113 mstask.exe
127 VSStat.exe
130 vshwin32.exe
141 Avconsol.exe
133 WebScanX.exe
148 Mcshield.exe
132 nddeagnt.exe
175 explorer.exe
182 CPDClnt.exe
178 mgaqdesk.exe
177 mgahook.exe
176 dpps2.exe
104 AlogServ.exe
189 CMGrdian.exe
191 RuLaunch.exe
194 AllerCalc.exe
196 FINDFAST.exe
198 OSA.exe
200 tbnote.exe
217 O... Read more

A:Outlook Fails - Generates Dr Watson

See if this applies.
MAPISP32.exe Exception
 

Read other 1 answers
RELEVANCY SCORE 40.4

Occassionally emails are sent to me and my friends with my name in the subject box. When you open the emails there usually a link to click to. My friends are upset they are getting these unwanted emails as well as myself. What can I do to terminate this problem. I have a laptop and desktop with Windows xp 7 and Windows Vista.
 

A:hotmail generates emails without my knowledge

Hi,

Change your email account(s) password(s) to strong ones (don't use same password for each of them!). Monitor situation for a few days to see if issue still occurs.
 

Read other 1 answers
RELEVANCY SCORE 40.4

Whenever I try to start Star Wars Galaxies (great game) I always get a Program Error message saying that Launchpad.exe (the program that Star Wars Galaxies starts from) has generated errors and has been closed by windows. It does this every time.. quite annoying. Anyone know how I can get around this?
 

A:Game generates errors on startup

Read other 16 answers
RELEVANCY SCORE 40.4

Hi, I found a strange process running 'Autorunmex.exe' on a laptop. I realized that it generates a hidden annoying folder Reclyler on USB store devices, I tried to delete it but it regenerates, Antivirus or Antispyware software I used didn't detected it, what else can I do?
 

Read other answers
RELEVANCY SCORE 40.4

Lately I've been having some unusual network traffic. I've checked with Network Monitor 3.4 and the process name is either svchost or system or unknown.
How can I find out what generates the traffic ? There were mainly TCP packets, but others too.

I don't expect to solve the problem for me, just want some guides that you might know of, or tools to analyze network traffic, or some info on how to interpret Network Monitor frame details.

edit: antivirus/firewall/.. is hopeless

A:How to determine what generates network traffic?

You could try a packet sniffer/analyzer such as WinPcap... but they arent easy to figure out initially!

Read other 3 answers
RELEVANCY SCORE 40.4

When ever I try to open Disk Management, it is generating error "An internal error occurred. Restart the Disk Management snap-in." Few days ago I think I disable few of the services, then the problem has been seen. Hope to get some solution.
Thank you in advance


Thank You in advance

Read other answers
RELEVANCY SCORE 40

Starting three days ago started getting a popup in Internet Explorer and around desktop that says:"System Error! Your system was infected by unknown trojan.It's dangerous for your system (critical files can be lost)! click Ok to download the antispyware program to clean your system! (Recommended)"Based on internet research, sounds like "Smitfraud"? Have run spybot, adaware, spydoctor, housecall, panda, etc to try and remove it. SpyDoctor found it and said it removed it, but it's still there. Followed directions to run ComboFix, leading me here. PLEASE HELP!!I have ComboFix log saved, but Forum said not to post. Hijackthis log below. Screenshot attached.Logfile of Trend Micro HijackThis v2.0.2Scan saved at 5:09:37 PM, on 3/28/2008Platform: Windows XP SP2 (WinNT 5.01.2600)MSIE: Internet Explorer v7.00 (7.00.6000.16608)Boot mode: NormalRunning processes:C:\WINDOWS\System32\smss.exeC:\WINDOWS\system32\csrss.exeC:\WINDOWS\system32\winlogon.exeC:\WINDOWS\system32\services.exeC:\WINDOWS\system32\lsass.exeC:\WINDOWS\system32\svchost.exeC:\WINDOWS\system32\svchost.exeC:\WINDOWS\System32\svchost.exeC:\WINDOWS\system32\svchost.exeC:\WINDOWS\system32\svchost.exeC:\WINDOWS\system32\svchost.exeC:\WINDOWS\Explorer.EXEC:\Program Files\Common Files\Symantec Sha... Read more

A:Have Spyware That Generates Popup With Ie Strokes - (smitfraud Maybe?)

Hi,Please read and perform the instructions posted here:http://forums.spywareinfo.com/index.php?showtopic=107621Reboot afterwards, rescan with HijackThis and post the new log in your next reply.

Read other 6 answers
RELEVANCY SCORE 40

http://www.dslreports.com/shownews/Cisco-Average-Connection-Generates-149-GB-Monthly-111109Cisco's most recent Systems Visual Networking Index (VNI) Study notes that the average broadband connection is now generates 14.9 GB of Internet traffic per month, up 31% from 11.4 GB just last year. Unsurprisingly, Cisco notes that the majority of this is video driven, while P2P's share of the overall traffic pie continues to decrease. P2P traffic now accounts for 25% of global broadband traffic, down 34% from 38% of traffic last year -- while video now accounts for 26% of all traffic. Some other notables from the study:Click for full size• Over one-third of the top 50 sites by volume are video sites, and "contrary to popular belief," notes Cisco, none of them are pornography websites.• Ten of the top 50 sites are software update or security related, while in North America, nearly 60% of the top 100 sites for the last year were video and gaming sites.• Voice and video communications traffic (2% of all traffic) is now six times higher than data communications traffic such as email, instant messaging, instant messaging file transfer.• The top 1% of broadband connections are responsible for more than 20% of total Internet traffic, and the top 10% of connections are responsible for more than 60% of total Internet traffic.• During Internet "prime time," which ranges from 9PM to 1AM around the world, peak traffic is 72% higher than Internet t... Read more

Read other answers
RELEVANCY SCORE 40

After installing the latest Intel HD 530 driver update (v20.19.15.4454) for my XPS 15 9550, I am receiving the following error each time I boot my system.
======================================================
Faulting application name: IntelCpHDCPSvc.exe, version: 1.0.0.1, time stamp: 0x572a4b65Faulting module name: ntdll.dll, version: 10.0.10586.306, time stamp: 0x571af2ebException code: 0xc0000005Fault offset: 0x000000000002fe34Faulting process id: 0xadcFaulting application start time: 0x01d1d5adb2768847Faulting application path: C:\WINDOWS\system32\IntelCpHDCPSvc.exeFaulting module path: C:\WINDOWS\SYSTEM32\ntdll.dllReport Id: fb958e23-7617-428c-804e-ed3556b0189dFaulting package full name:
======================================================
Is there any further update available that will resolve this error?
JohnD

Read other answers
RELEVANCY SCORE 40

I have a data logging program that runs 24/7 and which displays a continuous record of the data on the CRT. It is really an MSDOS program, but it runs fine on Win98. When it is running, it takes over the entire display. The problem is that it will not tolerate ANY sort of screen output from another program. It immediately locks up, although it doesn't take Windows down with it.

I would like to use the task scheduler to run a little .bat script that uploads a day's worth of data to web page. I can redirect the output generated by various commands in the .bat to the NUL device, and prevent the script from generating any output, but Windows insists on opening a MSDOS window when the .bat runs, even though nothing gets displayed in it. Just opening the window is enough to derail the data collection program. I had hoped that I could do something like "upload.bat > NUL" but it doesn't work.

I could always write the script to run from another machine to control the process remotely, but I'm not thrilled with the idea of keeping a separate machine on line just to run a 10 second task once a day.

Anybody know a way around this?
 

A:Is it possible to write a .BAT file that generates NO screen output?

If you were running this on Windows 2000 or XP I would suggest using this.
http://www.joeware.net/freetools/tools/quiet/index.htm

There is a way to do this with a vbscript as well. Basically runs a command shell invisibly in the background without seeing it. I will have to digg up that link.
 

Read other 2 answers