Over 1 million tech questions and answers.

W530 - manual; mother board replacement; GPU failure

Q: W530 - manual; mother board replacement; GPU failure

Does anyone have the manual for the W530 as I need to look at replacing the motherboard as the GPU has failed and cannot be replaced on it's own? Thanks.


Moderator comment: New post created. Subject edited. Was: Re: Replacing motherboard myself - OR - Repair motherboard













Solved!

Go to Solution.

RELEVANCY SCORE 200
Preferred Solution: W530 - manual; mother board replacement; GPU failure

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: W530 - manual; mother board replacement; GPU failure

Sparky5 wrote:
Does anyone have the manual for the W530 as I need to look at replacing the motherboard as the GPU has failed and cannot be replaced on it's own? Thanks.

Welcome to the forum!

GPU is soldered, meaning your're right about needing to swap the complete motherboard. You can download the HMM (Hardware Maintenance Manual) from here: click me!

Good luck with the swap!

-

Read other 1 answers
RELEVANCY SCORE 89.6

How Do I get the mother board manual specification for  Gmanga 81945GM-RH? for my dx2280 machine. -ajith.

A:mother board spec/manual

Try this page http://h20000.www2.hp.com/bizsupport/TechSupport/DocumentIndex.jsp?contentType=SupportManual?=en&cc=us&docIndexId=64180&taskId=101&prodTypeId=12454&prodSeriesId=3223349 it might help

Read other 3 answers
RELEVANCY SCORE 87.6

I am looking for a motherbard manual for the ASUS SPAX motherbard which was made for HP, the motherboard only has "SPAX" printed dead center where usually there is other info.  there is also some bar codes on the last ISA slot one of which is "86T86977" and the other is " 861052" the boards is a full 7.5X12 inch ATX with three ISA slots and runs an AMD K6 chip   

Read other answers
RELEVANCY SCORE 84.8

Last night I tried to replace the mother board on my Dell Inspiron 5000e laptop. I bought the replacement part from an Ebay store, and it is still under warranty (90 days). After taking apart my entire laptop and putting the whole thing back together--a job that took my friend and I three hours--we plugged it in for the moment of truth. The battery light came on, so far so good. Then we hit the power button and...nothing happened. Well almost nothing. The machine appeared to turn on. All three lights on the the bottom of the LCD went on, but that's it. The fan didn't start, the monitor didn't start. The hard drive light was on but didn't appear to be reading at all. (i.e. no blinking or noise.) I'm quite perplexed. Everything appeared to go back together perfectly with the possible exception of the diskette drive cable clip, which we weren't exactly sure whether to put back in over, under, or through the disk drive data cable. We eventually put it through. For instructions and pictures of the process, check out link:

http://support.dell.com/support/edocs/systems/pblan/removing.htm

Everything else seemed to go back together seemlessly. We were very careful with screws and put all the right sizes back into their correct places. What could be causing this? Have I received a defective part? Are there any other explanations? I suppose a possible explanation is that the processor and/or video board are not quite connected correctly, but they seemed t... Read more

A:Mother Board Replacement

Read other 13 answers
RELEVANCY SCORE 84.8

unplugged elect cord of phone from voltage surge protection,computer went off but light stayed on.  I've been told it was my mother board,  This machine has stuff I need and I  would like very much to fix it.  Does anyone know where I can get this done?

A:MOTHER BOARD REPLACEMENT

A local computer repair shop is the best bet, but for a computer that old, it will probably cost more than it is worth.  Best option is to salvage the data from the hard drive onto a working PC.  Easiest way to do that is to remove the hard drive from the old Pavilion A6400 and connect it to a working PC.  If it is just to retrieve the data, an adapter similar to this will work nicelyhttps://www.amazon.com/AGPtek-Drive-Adapter-Converter-External/dp/B00BIE996S/ref=pd_sim_147_2?_encod...

Read other 1 answers
RELEVANCY SCORE 84.8

How to get replacement Mother board from HP

Read other answers
RELEVANCY SCORE 84.8

Is it possible to purchase a mother board for an older hp desk top model # P6216F if so where could I purchase one.thank youAnthony Simonie

A:Mother board replacement

Motherboard P6216F  If you found my answer helpful please say thanks by clicking on the Thumb's Up icon.        If my answer solved your problem please mark it as the Accepted Solution. Thanks!

Read other 1 answers
RELEVANCY SCORE 84.8

Hey guys
i have a compaq presario SR1610NX Recently i shorted out my mother board while doing a proccessor trade out (trust me the proccessor is compatable as the computer did run for a while after the switch). anyway i called up compaq and they say that my mother board was discontinued and they tried to sell me a whole new tower. i need a compatible replacement. im using a AMD Athlon 64 3700 proccessor.
Please Help Me- Dr. Feelgood
 

A:Mother Board Replacement Help

Read other 11 answers
RELEVANCY SCORE 83.6

I don't think the model will matter, however, mine is a Pavilion Slimline s5510f. With thanks from this forum, I have determined that I need to replace my mother board.  I have found HP support documentation on how to replace the mother board, but that leaves the question as to whether I have to do any type of programming of the new mother board or is the MB more or less a plug and play? Thanks for any help.  

A:mother board replacement and programming?

Hi, Actually you can't do anything with motherboard (only updating BIOS which is still in the hands of vendors). What you see is what you get or using your terms: it is a plug-and-play part. Regards.

Read other 1 answers
RELEVANCY SCORE 83.6

Hi,So my motherboard died,authorised Lenovo service said that part is out of stock so i try to find any part to fix the laptop.What i found that serial number of my laptop is MP12LQNQ and in SYSTEM BOARDS it says Part No. 5B20J23755. It shows there is zero substitutes and i can't find nowhere this type of board Loosing the hope just wanted to ask here to be sure and maybe you now if i can get anywhere this or any other mother board to repair my laptop

Read other answers
RELEVANCY SCORE 82.8

I have a HP Pavillion x360 (13z-a000) that I bought two years ago.  The CPU is dead.  The computer does not power on and the Caps Lock button blinks constantly (single blink).  I brought it to a local shop and they confimed this but they do not fix HP.  If it is the motherboard, can I just buy one and replace it myself?  Where can I buy the mother board?  How do I find the part number?  
 
The serial number is [Personal Information Removed]
 
Larry

A:Pavillion x360 mother board replacement

Here is the Manual: Service Manual There are 4 different AMD motherboard depending on if you have the A8 processor or the A6 and Windows Standard or Pro. Get the same Windows version as you have or you will have to buy another copy of Windows. Your hard drive installation of Windows will not activate unless you install a motherboard set up for the same OS version. Post back if you need a more detailed explanation. Yours is a CTO laptop so we cannot just look up your original factory specs. You can interchange the A6 and A8 version of the motherboard with the caveat stated above. The Manual shows the "how-to" on replacement. Assuming you have the A8 and Windows Standard this is the part number: 769075-501 This is it on US amazon.com for $109 which is a pretty fair price: https://www.amazon.com/HP-Pavilion-Convertible-Motherboard-769075-501/dp/B0118AZL1S/ref=sr_1_1?ie=UT... Post back with any more questions.  If this is "the Answer" please click "Accept as Solution" to help others find it. 

Read other 1 answers
RELEVANCY SCORE 82.8

I have an Emachine T-3092 and need to replace mother board and CPU potentially due to a failure. Have not replace one before. Need to know suggested motherboard as I could not find it on E-Machine website. Thanks.
 

A:Emachine T3092 Mother Board Replacement

You will most likely end up replacing everything except the case. Any ATX or mini-ATX board should fit. How many PCI slots do you have now? 3? The power supply should be changed while your at it... Just deside what processor and memory you want to use, and select a motherboard that will run it.
 

Read other 6 answers
RELEVANCY SCORE 82.8

What is the correct procedure for replacing the MB battery? Power off? etc. I have a alton m760v MB that reverts back to cmos defaults after being unplugged for a couple of days. Is this normal, I have 2 that do the same thing. Old batteries ?
 

A:Mother board battery replacement procedure?

CMOS should only reset if there is something wrong, or if a battery is bad.

Replacing it is just as you said - unplug power, take out the old one, put in the new one.
 

Read other 1 answers
RELEVANCY SCORE 82.8

I have to change the motherboard of the above laptop and would appreciate indications on the manufacturer of that part and serial number. Best regards Michel Bellier

Read other answers
RELEVANCY SCORE 82

One of my 2 Gb Corsair Ram sticks has stopped working so looking to replace all the others . At the moment I have 6 x 2 Gb Sticks = 12 Gb .
Can I use 2 Corsair Vengeance 8Gb sticks , As I am not sure if the X58 mother board will support just 2 sticks or do I have to replace and fit 6 x 2 Gbs sticks the same as was fitted .
At the moment I have 6 x Corsair Ram Sticks there specs are 2048 Mb 1866 MHz 7-8-7-20  1.65v ver2.1 DDR 3
Replacement sticks I was thinking of fitting are Corsair Vengeance Pro 16 Gb DDR 3 1866 MHz  Red 2x8Gb 1.60v Ver8.22 .
Any Thoughts any one Many Thanks

A:Suitable replacement Ram for Alienware Aurora r4 with a X58 mother board

You cant use 1.6V RAM
Ballistix Sport 4GB DDR3-1600 UDIMM
CT2849354

DDR3 PC3-12800 • 9-9-9-24 • Unbuffered • NON-ECC • DDR3-1600 • 1.5V • 512Meg x 64 •
upgrade for Alienware AURORA-R4 system.

http://www.crucial.com/usa/en/aurora-r4/CT3682798
 

Ballistix Tactical 8GB DDR3-1600 UDIMM

Upgrade for: Alienware AURORA-R4
Crucial part number: CT3682798
Brand: Ballistix
Form Factor: UDIMM
Total Capacity: 8GB
Warranty: Limited Lifetime
Specs: DDR3 PC3-12800 • 8-8-8-24 • Unbuffered • NON-ECC • DDR3-1600 • 1.5V • 1024Meg x 64 •
Series: Ballistix Tactical
 

Read other 4 answers
RELEVANCY SCORE 81.2

 Hello I have a Lenovo G50-80 Laptop mod 80E502Q3IH my laptop is not starting leds are not blinking no problem in ac adaptor and battery so I have given in a repair shop they told entire mother board has to be replaced. My laptop has a graphic cord and service personnel said mother board cost 12000 without graphic cord what can I do it is too costly can I get a used one anywhere

Read other answers
RELEVANCY SCORE 80.4

Hi friends,
I have windows xp sp2 on 80gb harddisk , mother board mercury make,intel processor now this mercury mother borad what i have donot support ddr2 RAM, i had moved harddisk to intel motherboard box.

i am able to detect harddisk and windows apologies to start safe , last good menu and start normally and command prompt appears, i tried all options but fail to start windows xp.

MY IDEA IS AFTER LOGGING INTO WINDOWS , LOAD INTEL MOTHER BOARD DRIVERS.
Pl. find me solution to loginto windows and resume work.
THANK YOU

Regards
Vinod

A:moved windows xp sp2 harddisk from mercury mother board to intel mother board

welcome
you cant use the same xp on another motherboard.

Read other 2 answers
RELEVANCY SCORE 80.4

Hello people, I really have a big problem. My computer windows xp started forgetting things like date and time. So, I decided to change the battery located in the mother board. I turned off my computer, I unplugged power cable, I went to the store and bought an identical battery. I came back home and I installed the new battery and I plugged all cables and I started my computer but I did not hear any beeps, those you hear when the system is booting, and even worse, I could not see any data in my monitor just a message from the monitor that cable is not plugged. So I tried a different monitor but i did not succeed. I bought a New graphic card but it did not work neither.

Please, i need your help. Any other ideas or suggestions to solve my problem

Thanks
 

A:Battery of Mother Board Failure

Read other 12 answers
RELEVANCY SCORE 80.4

My mother board MSI 6199VA doesn't boot anymore, even if i've changed the battery.
From the LED's, at power on, it looks that the BIOS doesn't respond.
Is it a creadible failure ?
Is there's a resolution to this pb ?
 

A:mother board MSI 6199VA failure

Read other 6 answers
RELEVANCY SCORE 80.4

40 minutes ago, may notebook gone in hoverheat.It presented screen freezed, and a lot of heat in the downside cover.After a moment that i called the task manager with the combination ctrl+alt+del i've seen a blue screen for an instant.In that blue screen i've seen a QR code and a small frase but it's disappeared before i can read.Sorry for my english but i'm italian.I've remoived the ac connector.And hold the power button for 5 seconds to do a forced shutdown.After i've wait 5 minutes i've reconnect the power cable to the laptop, i've restarted it, and i had seen the battery isn't in charge.As i read in the guide on the hp support, i've removed the ac adapter from the laptop and from the electrical alimentation for ten seconds, but after the reconnection, th laptop not go in charge.I've try to disconnect the ac adapter for ten minutes but the laptop not go in charge.I can't try if the ac adapter send power to laptop.Someone can help me?

Read other answers
RELEVANCY SCORE 79.6

The last 2 days when I bring my computer out of standby mode after some time it turns itself off and today shut itself off in the middle of start up after having tried to start it 3 times. Does this mean that my hard drive is failing or my mother board or what?

Thanks for your help.

I'm running Windows XP on a Sony Vaio PCG-K33 notebook.
 

A:Hard drive or mother board failure?

Read other 6 answers
RELEVANCY SCORE 67.6

my hp mother board lights up the green light on the board but it doesnot power on

Read other answers
RELEVANCY SCORE 62

Hi all - I've got a w530 2436-CTO that likely needs a new main board. It won't post, and when the memory is removed it gives a beep code that the manual says is either the DIMM or the system board. I believe my system board FRU is 04x1505, but I can't find anywhere to buy this part. How can I figure out which other FRUs are compatible? For example, I see many places selling 04x1547.A Lenovo doc describes 04x1505 as PLN Q1 y-amt y-TPM and the 04x1547 as PL Q3 W8 nAMTyTPM.Any thoughts? Thanks guys.













Solved!

Go to Solution.

A:New system board options for w530

Without any memory installed, a 1-3-3-1 beep sequence is normal.Not sure on the board FRUs though. Do you happen to have a K2100M?

Read other 9 answers
RELEVANCY SCORE 61.6

Hi, Does anyone know which other board is compatible with W530 04X1515? Thanks.

A:Other compatible system board with W530 04X1515

There are MANY part numbers.  That board is a fairly basic W530 board.  It has TPM, no AMT, no RAID, the Q1 graphics chip and a windows 8 pro license.  Boards with RAID options and AMT will also work.  Q3 graphics would be OK , but more expensive.  You want one with a PRO-type license.  I think I have one at home, but I am away until Sunday evening. If you are interested, send me a PM.

Read other 1 answers
RELEVANCY SCORE 60.4

Have a Question... after replacing a motherboard if you forget to put thermo paste on the processor and it over heat will I have to also replace the motherboard and the processor this time.
 

A:Bad mother board

Read other 9 answers
RELEVANCY SCORE 60.4

New Guy here is in need of locating an older Latitude CPX Mother Board. I realize this is a tall order..because its old, but thought I would check. I was permenetly injured a few years ago (seriously) and am trying to get 3 kids into and through school. I have this Latitude..CPX yea its 6 years old, but I have nothing in it. IS it possible to locate a Mother Board. The Keyboard area of the mother board is out, i was told. I bought a new keyboard... only to find its likely the mother board. The minute I download the keyboard drivers... the keys work properly. Then, when I restart it.... boom... the keys are all screwed up. I hit the N key and a 6 appears??? Stuff like that. Anyway, any leads or suggestions, please let me know. I'm a real rookie at computers. Thanks,
 

A:Need Mother Board

Hi Buzz,
It sounds like you need to remap your keyboard. Go the following Microsoft webpage:

http://www.microsoft.com/downloads/...69-57ff-4ae7-96ee-b18c4790cffd&displaylang=en

and download the Server 2003 tools software for free (good for XP too). Run the "remapkey.exe" tool to reprogram your keyboard--provided you're running Windows XP, of course.

Hope this helps! Good luck!

norbac
 

Read other 1 answers
RELEVANCY SCORE 60.4

My son's computer was running a little slow. Then when he went to turn it on, it would boot up, but would let him past the start up screen. Kept asking for password. I took it to my computer guy. he checked, said he couldn't find anything wrong. He wiped it out and reinstalled. He said he did this two times. Then he calls me and says he needed to try something else. Calls me back next day, says its my mother board. No good. Called him yesterday, said that it wasn't ready, needed to reinstall everything. This is now the 4th time he is reinstalling. Called today, said it's not ready, taking long time to reinstall everything. Told me I could probably pick up a new computer for about 400.00. I told him to just reinstall everything. Told me he was trying, but said that he may not be able to. Can anyone shed some light as to what is going on. I don't trust him all of a sudden. Why reinstall 4 times. Any suggestions what it could be, or what's going on.
 

A:Is It my mother board?????

Sure sounds fishy to me. If you can get it back maybe someone on the forum can assisst you to get it up and going.
 

Read other 1 answers
RELEVANCY SCORE 60.4

hellomy HP  ENvy  17        17-j184na iam told by engineers needs new mother which no longer exsists for this machine im told so has to be a refurbished one at 169.99    does this seem reasonable for refurbished ..are new no longer made for an under 2year machine ut has already been fitted but they cant reinstall windows,,they say when it was refurbished it been completly wiped of codes which would have been put there by HP when made is this true hope for advuse please regrds david

A:mother board

Where do you live? In the UK? Use the HP PartSurfer to find the compatible motherboard part number. Input the notebook's serial number in PartSurfer. Search online for a  new replacement HP PartSurferhttp://partsurfer.hp.com/

Read other 1 answers
RELEVANCY SCORE 60.4

I am tryin to build new computer and have bought a AMD athlon XP 2700,
MSI K7N2 Delta mother board New Midi tower case 256DDR ram new WD80Gig HD and my 128Gig AGP video card also have transfered my exisiting DVD cd rom and CD/RW cd rom into the case also my old 20Gig HD which has Win ME on it which is set to master and the new one is set to slave and is formatted and partioned my problem lies here in when i turn the computer on it doesnt beep and just hang i have checked all the jumper settings for the board and have also cleared the bios in hope of it starting now this is the hard part this is the second motherboard i have had the first did the same so sent it back and this replacement one does the same *nothing* it just doesnt want to go into the bios all leads have been checked and triple checked any ideas and help would be grateful
 

A:Mother Board Help

Read other 6 answers
RELEVANCY SCORE 60.4

Hi my motherboard has died and i was wondering if it is possible to transfer my hdd to my new mb thank you

o yes op system is wndows 7 pro

A:hdd w7 pro new mother board

As long as the new motherboard is identical, then yes the drivers and the OS will work with it.

Read other 1 answers
RELEVANCY SCORE 60.4

PLZ REPLY TO THIS ASAP

ok i finally decided to ditch my old 478 socket mother board and of course im gonna toss my cpu and my ram too..i dont know much about mother boards or their specs

just recommend me a good board that supports AGP system coz theres no way im gonna change my video card also supports DDR3 memory and all new processors coz i have no intention to toss it again
 

A:New Mother Board

Read other 13 answers
RELEVANCY SCORE 60.4

Do you think this mother board is ok and good quality etc. And will be ok for this.
Socket-A SOLTEK SL-75DRV5 VIA KT333 Chipset ATA-133 AC97Sound DDR Memory Supported $169
http://www1.soltek.com.tw/English/home/01.htm

AMD ATHLON/PALOMINO XP1900 (1.6ghz) Socket A (Athlon not palimnio

SOCKET A / 370 ThermalTake Volcano 7+ THERMAL SPEED CONTROL Copper AMD 1.5gig

DDR-DIMM 256meg KINGSTON DDR266 (PC2100) DDR-DIMM 256meg KINGSTON DDR266 (PC2100)

CD Burner IDE 24x10x40x ASUS with recording Software Model CRW-2410A

DVD-CD-ROM IDE 16x DVD SONY OEM Model DDU1621
SeaGate 80 gig 7200rpm Barracuda IV ATA-100

GeForce4 TI4200 X-MICRO 64meg DDR Ram TV OUT Games pack
Internal PCI 56.6/V90 WEB Excel ESS Chipset

Keyboard & Mouse KIT MICROSOFT Hardware Value Pack Ergonomic Keyboard & Intellimouse

Undecided on speakaz

Midi-Tower A-Open ATX 300watt Model H600A P4 Ready USB PORTS FULLY OPTIONED

Sony Floppy Drive
Second hand monitor 15+

Also will it be easy to overclock cpu do any of u have expeirience witht this brand etc.
Thnakyou in advance,
Esky
 

A:Mother board?

you wont like that monitor , I got one .
 

Read other 1 answers
RELEVANCY SCORE 60.4

TENGO UNA NOTEBOOK HP ENVY ALUMINIO, 17T-J100, 18Gh ram, 2 discos duros. debo reemplazar la placa base, la pregunta al momento de solicitarla con estas caracteristicas lo puedo hacer o existe alguna otra a considerar: Mod. 17t-j100. serial: 5CG5111GZJ. n| MOTHERBOARD: SPS: 720265-501. CT 1541. TAMBIEN DONDE LA PODRIA ADQUIRIR

A:Mother board

Ingles, por favor

Read other 1 answers
RELEVANCY SCORE 60.4

which specification of a mother board will show that it has a 20 pin or 24 pin power socket
 

A:mother board

Power supply:
http://www.atxpowersupplies.com/

Converters are available for 20-to-24 and 24-to-20.
 

Read other 2 answers
RELEVANCY SCORE 60.4

I want to unplug everything from the existing mother board, remove it, and slide in a new mother board, reconnect everything, boot from the Win XP CD, do a repair and take off running without having to re-install all the application programs.
Will this work, or do I have do do a completely new install of XP and reinstall all the applications?
 

A:New Mother Board

Read other 8 answers
RELEVANCY SCORE 60.4

I have a defective computer with a busted cpu (Athlon, 'forgot the speed). I like to replace it with Athlon XP2000 or higher. My mother board is ECS K7VZA rev. 1.0. Will the Athlon XP2000 or higher work on my mobo. Help please.
 

A:ECS mother board

Read other 8 answers
RELEVANCY SCORE 60.4

My computer i have rightnow is a HP T6212 and its around 7 years old at its to the point were it cant do anything right with out random performance drops so were going to get either a new computer or build on. Ive told my mother that building would save atleast 100 dollar. Now my problem is i need a mother board that can take 4 GB of ram (DDR SDRAM) and we dont need more then 125gb memory, the computer we hae right now has 145gb, and only 30gb are used :/ so i think we an save money froom haveing les mem. I plan on playing Mabinoig, combat arms, Dragons nest,Vindictus,mincraft, and my sister plans on playing Sims 3, all of this on my computer, and being able to record videos like minecraft. on top of that the normal flash games. this is like 10-15 mb of space, not much so alota space isnt needed, but a fast enough mother board is needed.
Also what is a good enough graphics card to play these games, they arent high end graphics and i dont need high end either. so yeah name em please and make em cheap
 

A:Mother board

Additional Details

Some where around 400-600 dollars and i only want a hard drive with around 120 gb and ii ment 4 ram slots i will be playing games that are like bf2 level of graphics and things. i have a case for the computer but i need a new mother boards and a decient graphics card. the power supply i have is stock so a cheap but decient power suplly would be nice.
 

Read other 2 answers
RELEVANCY SCORE 60.4

DX48BT2 is the board i'm looking at getting and wonder if i should go with ddr2 or ddr3 Ram how much of a difference is it and is there other types of ram that would to a good job ..wanting it for ultimate gaming
 

A:Mother board and Ram

DDR3 comes with high clocks but also with price and high latency. So, high quality DDR2 would(COULD in some occasions) still outdo DDR3. To a point, latencies can determine the performance more than clocks.
 

Read other 2 answers
RELEVANCY SCORE 60.4

HI....
i am purches assus P5KPL-AM/PS mother board but audio (on board) cannection not there. it is possiable?

regards

A:mother board

Rup, did you install the cd that came with the board?

Read other 1 answers
RELEVANCY SCORE 60.4

i have a dell dem 8100 and it has a planar mobo it is a 5e692 i need to know if it is an atx or what it is i am going to buy a new case and need to know please help me out i am new to this stuff
 

A:need help with my mother board

It should be an ATX form factor. I have an 8300 and it's a standard ATX mobo. The only thing you need to be careful of is that there isn't anything proprietary like the front panel connections or power supply connections. Sometimes they use things that are not standard.
 

Read other 2 answers
RELEVANCY SCORE 60.4

Hi, i need to know how much RAM my mother board can take, it has 2 slots.. but i was thinkking i would get 2 x 1 GB stickas of ram.. i was wondering if it would take that much..

Info:

 

A:My mother board..

http://www.atozincomputer.com/catalog/gigabyte_k8vm800___amd_athlon_64_motherboard_and_cpu_combo_4467394.htm said:



MEMORY
Supports up to 2 GB DDR 400/333/266 Modules via (2) 184-pin DIMM slots.Click to expand...

I think thats your mobo there.. just double check by going to the link i gave..
Make sure you have matched pairs of ram to ensure max compatibility..
 

Read other 4 answers
RELEVANCY SCORE 60.4

ok like the subject said i need one about in that range. im building a computer as u can tell right now i have (i should of gotten the mother board as one of the first things ) a 512mb sdram card a radeon 9000 pro 128 agp graphics card a 48x12x48 burner a 52x cd romdrive a 350 watt antec power supply and a antec case that 8.1" (W) x 20.6" (H) x 18.6" (D) and i plan on having a pentium 4 proccesser at 2.4 ghz and a 40 gig hard drive so if u could tell me where i could get a motherboard that would suit that computer please tell me where i can get it!!
 

A:need mother board from 80$-110$

Read other 16 answers
RELEVANCY SCORE 60.4

Hi,

Here i have an P-III mother board but in that i does not have on board speaker and also if try to connect external speaker there is no connector for connect that ex. speaker. So how to i check the RAM slots in that board is workin or not.

Kindly help me.
 

A:Mother Board

Read other 9 answers
RELEVANCY SCORE 60.4

i am using a intel m/b model d845gl va with the o\s winxp pro service pack 2
can anyone help me with the insruction to bring the bios menu up i am not going to touch it i just would like to no if any technically minded person needed to.tia.col.
 

A:mother board.?

Your MoBo uses an amibios, you can enter setup by tapping either Del, F1 or F2 keys on POST or during boot logo.
 

Read other 2 answers
RELEVANCY SCORE 60.4

I had my daughter's computer fan fixed and I told them not to erase anything but the computer has been reset. Is there anyway to retrieve information from the mother board that we need?

Read other answers
RELEVANCY SCORE 60.4

The SN# (removed content).  The mother board has went out, trying to find out what mother board I need and where I can find. All help is greatly appreciated. Thanks in advance.

Read other answers