Over 1 million tech questions and answers.

if does not start computer how to recovery data

Q: if does not start computer how to recovery data

hi friends how to data recovery if computer won't start

Read other answers
RELEVANCY SCORE 200
Preferred Solution: if does not start computer how to recovery data

I recommend downloading and running DRP. It's a recovery tool that has been proven to recover files that most other programs have no luck with. I've even recovered files from freshly formatted or partitioned drives.

You can download it direct from this link http://goo.gl/v51TwD. (This link will automatically start a download of DRP that you can save to your computer.)

RELEVANCY SCORE 59.6

Data Engineers - Data Recovery Services | Hardrive Data Recovery Services
Get the best data recovery service from Data Engineers Data Recovery and Recover lost or deleted data from Hard Drive, SD Card, RAID, SSD, Mobile Phone and Pen Drive etc. Recover your lost data with 100% security and safety.
Data Recovery Services, External Hard Drive Data Recovery, Data recovery in Delhi, data recovery Nehru place, hard disk data recovery, dead phone data recovery, hard drive recovery, SD Card Recovery, SSD recovery, RAID recovery, mobile recovery.
For More Info - Visit Us - >>> www.dataengineers.in

Read other answers
RELEVANCY SCORE 53.2

I am just try to figure out some thing which works best out of these two. As recently have gone through a recovery company Stellar Data Recovery http://www.stellarinfo.co.in/company/company.php . And after surveying i found companies proving software also.
The services paid more isnt it?  but the recovery is maximum. what you think?

Read other answers
RELEVANCY SCORE 53.2

So, this is a long one.
 
Grandma has two HDDs, one with a win10 install (Borked, long story.) and one with a win7 install. We took the computer to Geek Squad as the win7 instance was BSODing with an error that I couldn't figure out. Sounds great, right? They couldn't figure it out either, so we took the box back home, hooked it up, and...it boots into Geek Squad's analysis software. Okay then. Turns out, they left their disk in the DVD drive of the box by accident. I decided to run a SMART scan, which turned up 500 bad sectors on the win10 disk, and ~5-10 on the win7 disk. <PanicTime> So, 2 new HDDs ordered, and professional data recovery slated for the win10 instance, but in the meantime, I used ddrescue to transfer all the data from the win7 drive to a new drive. However, when I put this new drive in the box and booted, it did not go into win7, a BSOD, or even a windows recovery screen. It merely sat blinking a "_". I tried using a win7 install disk in recovery mode, but for some reason that says that there is no OS on the new win7 drive, and when I tried using Advanced System Options to get into recovery/repair mode, that option was not on the list. What can I do to hopefully fix this win7 instance? Even getting it back to the partially booting then BSODing state that we took it to Geek Squad in would be fine at this point. Thank you in advance for your help! :D

Read other answers
RELEVANCY SCORE 53.2

Greetings

My problem is this, I am a student at Heald college working on my Network Systems Admin degree. The Church I attend doesn't have a full time IT guy, just one of the guys who more like a hobbiest. The problem is, that their main computer stopped booting into XP. Once it got to splash screen it would freeze up, even in safemode. They called me, because I have helped some of the single moms at church upgrade their computers.

I find out the partition table is either corrupt or data is damaged, my best guess. So I take the drive, hook it to my own, move over all the important file and burn to DVD, so I thought. Take it back and do a reinstall hoping to get it up and running. That really didn't work. In the All users folders there are two folders I can't get access to Financial and the Teresa, Access Denied. Thinking I had everthing on DVD backed up I just format the HDD and do fresh install. The guy who set up their network finishes up. two days later Oct 2 I get a call saying those two folder are not on the DVD Financial and Teresa and they contain all of the church's financial info.

Is it possible to recover that DATA that was formatted over or are they basically screwed? I will be there tonight trying to use a recovery program, but I really could use use some serious help.

Sorry for the long post, wanted to make sure that you had the full story.
 

A:Data Recovery for our Church computer

yeah you can. go and download Get Data Back for NTFS/FAT32 depending on the file system. I formated my harddrive a while back and forgot to move some stuff off of it. It recovered it all. The only problem with that program is you have to licence it to save the files again. Otherwise i believe its the best available for download. Get it here

Just went there, they got some other cool stuff... :grinthumb
 

Read other 6 answers
RELEVANCY SCORE 53.2

Introduction
My niece apparently fell victim to a fake AV program on March 28, since the that's the date her calendar was stuck on and all directory entries end on that date. I believe that she then was hoodwinked into using the fake data recovery program. Unfortunately, she failed to mention the problem until this Monday, so I'm way behind on trying to fix it. I managed to clear up a few things by using Ad-aware, Spybot S&D and Housecall before running HijackThis. All of those programs were utilized by downloading them onto a DVD onto my laptop and running them from the DVD, which then was completely wiped clean by her computer. While I haven't yet tried this procedure to run the other programs listed in Read This First, I have a preliminary question:
As I shut down her computer for the last time, I noted that her D: directory is called "Data" and is almost full, apparently with gaming stuff. Do I need to do a separate repeat of all the programs on that drive?

​Thanks for any answer you could provide to the above question while I'm downloading and, I hope, running the other programs.
 

A:Computer trashed by S.M.A.R.T. Data Recovery

Read other 16 answers
RELEVANCY SCORE 53.2

windows 7-64-bit Computer cpu &Everthing 64-bit ( and 32-Bit Format have's got) 950 GB HDD Sata  
 On the last computer,  Backup $MFT tar.gz type,Backup $MFT Gzip type,Backup $MFT zip type,Backup $MFT ?so type,Backup $MFT Rar type,Backup $MFT 7-Zip Type,....And Fat32 data recover& warning "Not Enough Disk Space low Memory" PartedMagicLiveCd
Boot(Ubuntu Boot)  Latest computer, broke before's
Wipe HDD No Registry Change,,7-Zip,HKEY_CLASSES_ROOT, Zip Commands,Multimedia Formats ,ActiveXplugin and Negative Cleaner ActiveXplugin And Won't Boot Computer,,...  And Windows Application Data Recovery(Because Other's Ubuntu Application Data Recovery
Testdisk&PhotoRec)  Windows TestDisk&PhotoRec    Warning "Not Enough Disk Space  

Read other answers
RELEVANCY SCORE 52.4

The computer I have been using for 4 1/2 years (an E-Machines running XP) has finally died. Not sure what happened, but I can't even get it to turn on. It's as dead as dead can be.

Being the not-so-bright computer guy that I am, I haven't done a back-up in ages, and I have a lot of valuable info/files/music on the hard drive. My brother had said that I can "store" my files on his computer until I get a new one.

One problem; I can't get anything off the hard drive if it doesn't come on, right? Or is there a way of pulling info off the HD even when a computer is powered down, so to speak?

Any info, links, suggestions, and/or whatever elese would be greatly appreciated. Many thanks in advance.

AJC
 

A:Computer completely dead. Data recovery possible??

Read other 8 answers
RELEVANCY SCORE 52.4

Hello,

I have an asus altec computer running windows 7 home. I have unhidden the files so I can use it a little. I need to try and get this off my laptop so i can use it again. It pops up and says my computer is malfunctioning running a fake system scan wanting my to buy software to fix it. it takes me to data-recovery.com to buy it. I downloaded spybot to try an fix it but it will not work. Then i found this forum. Please help!!! I need this laptop for work.

A:Data-recovery.com spyware on my computer Win7

Hello and welcome.Please follow our Removal Guide here http://www.bleepingcomputer.com/virus-removal/remove-data-recovery .After reading how the malware is misleading you ...You will move to the Automated Removal InstructionsAfter you completed that, post your scan log here,let me know how things are.The log is automatically saved and can be viewed by clicking the Logs tab in MBAM.Copy and paste the contents of that report in your next reply. Be sure to post the complete log to include the top portion which shows MBAM's database version and your operating system.

Read other 1 answers
RELEVANCY SCORE 51.2

I have 2 problems, mine is recovering data from a DVD-R & a friend is looking for my help in recovering data from a "corrupted" Flash Drive.

I was burning data on a DVD-R multiple sessions disk when my Burner crapped out while using Nero. I now have a new Burner & when I go back into this disk I can only read data from my 1st session when I compare the #s from Nero's disk info tool, however it also shows that session 5 is still open?? but I cannot read anything from sessions 2, 3 & 4. Looking around I spotted CD Recovery Tool Box Free 1.1.7 is there anything more recent and or better that would let me try to recover the data on this disk. The data in session 5 is still on my HD but I would like to be able to recover the data in the other sessions, worst possible case even just the file names would be a small plus.

Now for the Flash Drive. It is a Lexar 8 Gig & what supposedly happened is that Peter lent it to a fellow employee so he could extract some data (probably a mistake). When he got it back a few minutes later & tried to use it all he got was a message that it was corrupted. As it has all of his product codes, phone numbers & personal sales data for the last year he is really desperate to try & recover the data. He does not have a computer of his own, so he has no backup (another bad idea). He has gotten a new Flash Drive a Sony 8 Gig, but I have told him that he better go out & get a 2nd one to use as a back... Read more

Read other answers
RELEVANCY SCORE 49.6

Hello everyone,

Im new, so bear with me please. The problem is on my old Sony Viao Model PCG-6H4L XP. I wanted to start fresh and the recovery system for windows gives me only a limited number of dates. I thought that the Viao recovery would do the job.

I was wrong.

I haven't checked recent forums about problems with this, so I went ahead and broke my laptop.
Before the Recovery system starts, my laptop says, with a black background,

'File \minint\system32\biosinfo.inf could not be loaded
The error code is 51239

Setup cannot continue. Press any key to exit.'

When I exit, it turns off, reboots, and this message cycles and cycles.

P.S: Below this message, there is a large, long bar that runs across the screen.
P.SS: Thankfully, I transferred the documents to an external HD, but I still need the laptop.

In need for desperate help, I need an answer!!
 

A:Solved: Sony Viao recovery system doesnt start, cycles, and the computer doesnt start

Read other 10 answers
RELEVANCY SCORE 48.8

Refreshed my laptopWent to turn it back on and won't go past the HP loading image. It will load for a while then restart. Will allow me to check memory and hard drive both passed and open the BIOS menu but not the system recovery which is what I need

Read other answers
RELEVANCY SCORE 48.4

Hi everyone..

My external USb Wd mybook box has 1 tb Seagate Sata 3 and i use original Wd disc as W7 installed... in My PC Case as sata II

Today my old problem appears again as Corrupted disc...
I have Get Data Back NTFS (and i used before plenty of times for recovery, loss data or unwanted deletions) but..

This time im stuck.. Becouse the disk i try to recover includes 870 gb (about) used disk space (only audio files) only 50gb (about) empty space... Thats too big for me to recover to other disks.. i don't have enough spaces that my other disks can handle..

I have about 300 gb FREE disk space in several disks or partitions include My thinkpad SL510 Notebook..
---------
So my question is
wit keeping my lost data in corrupted disk first, can i take them slowly to this 300 gb spaces (i know i can) and after create somehow emty space (deleting those recovered 300 gb + 50 on corrupted disk) and
use that empty space for more recovery. ???? Or smilar solutions.. Becouse DISC PRICES IS HEAVY nowadays and really i'm out of budget with buying some
equipments upgrades..
----------
IS THERE ANY PRACTICALLY POSSIBLE SOLUTION even can take very long time..
Like creating slowly slowly some extra spaces (don't know how)

I know i look silly in situation becouse i know u should never write to same disc if you dont want to say goodbye to your files..

E-how happened (not necessary to read these part)

according my experiences Thats the mistakes... DOn't do those at the same tim... Read more

A:Data recovery problem, Can reach corrupted data but no external space.

Hi,

Before you write more data or attempt to read data from the drive through Windows, I would suggest using a Live CD like SysRescueCD to boot from and access the HDD.

Read other 2 answers
RELEVANCY SCORE 48.4

hi
i have a scSi disk 36.4GB, i lost information from it and tried to recover with other recovery softwares to no avail finally i got winhex & got the professional licence.

i can now be able to see all the information on the 1 whole NTFS partition, but the problem is that i can't be able to recover it.
when ever i open the logical drive i can see all the information and most of the information is stack up in a "free space" which is around 33gb which i can be able to see has all the information that i need.
i have tried to recover the free space but its only copied to the location that i specify and no recoveries are made.
recovering the files by type/ name has bore no fruits.

a freind told me i have to curve out that area and use data extractors to get the information out of that area (freee space).

the information in that drive are sql data bases and zip files. whats the header for sql.

what techniques do i use to curve out that space and be abele to extract the information, for i can even read the information in text format.

which are the data extractors available in the market

kindly assist its quite urgent i get this information out
 

A:data extractors / sql header [Hard Drive data recovery]

I don't know where this thread properly belongs -- but I suspect the question may be too esoteric for most here.

Since it involves data recovery from a hard drive I'm going to move it to Hardware, I think "all other software" is not likely to have anyone with this type of experience.
 

Read other 1 answers
RELEVANCY SCORE 48.4

Minitool Power Data Recovery or Runtime Get Data Back, which
one would you choose or which one did you choose? I want to purchase a serious data recovery program for personal business use.

A:Minitool Power Data Recovery or Runtime Get Data Back, which

you can try the trial of both products which give you a taste of what the programme is like  

Read other 1 answers
RELEVANCY SCORE 48.4

Yoga 2 11 (Lenovo) Serial Number: YB******** Machine Type Model: 80CX59445810
 
Motherboard crashed and I need to get the data off the hard drive.  However, Lenovo apparently uses some proprietary connection that no repair service can connect to.  It does not just plug into normal hard drive interface devices.  How can I get all of my data from this hard drive??
 
Moderator note: serial number removed to prevent abuse.

Read other answers
RELEVANCY SCORE 48.4

Dear Friends.
Hope this finds you well!
I'm not certain this is in the best forum, but it is a Windows 7 computer
I was trying to do another sets of DVD's from existing MP4 files from a SanDisk Ultra 32GB card. These would then be used with DVD Flick and ImgBurn to make the DVD's. The first(2) DVD's worked well but somehow a few of the files were not copied entirely. So, I was redoing these again to make certain I had ALL the files for the next (2) DVD's.
These are files my older brother entrusted to me for me to convert them to a DVD format. They are files of his daughters nearly entire basketball season [frames] of about 70 files and were sentimental to him and his daughter.
I feel personally responsible to correct this if it is at all possible!? It could get ugly
It was an honest error on my part as I mistakenly deleted what was titled Video 100 on the SanDisk which contained all these MP4 files. I didn't realize I was removing them from the SanDisk. I'm hoping there is a free date recovery app I could use for this one application so that an expensive license would not be required!?
Thank You in advance for your care, compassion and cooperation. I'm stuck in the mud...
Very Truly Yours,
Raphael
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: Intel(R) Core(TM)2 Duo CPU P8400 @ 2.26GHz, Intel64 Family 6 Model 23 Stepping 10
Processor Count: 2
RAM: 3983 Mb
Graphics Card: Mobile Intel(R) 45 Express Ch... Read more

Read other answers
RELEVANCY SCORE 48.4

Can i recover my data after full format the hard disk on windows 7?

Read other answers
RELEVANCY SCORE 48.4

Minitool Power Data Recovery or Runtime Get Data Back, which
one would you choose or which one did you choose? I want to purchase a serious data recovery program for personal business use.

A:Minitool Power Data Recovery or Runtime Get Data Back, which

Hi

Both are good programs and i would recommend purchasing both ( if you can afford ). Both has it's own pros and cons.
"GetDataBack" is good at virtual reconstruction of damage/unrecognizable file systems but i personally found it weak at recovering image files. It recovers images but most of them seems to be corrupted in my testings. Also you need to purchase seperate versions for FAT and NTFS ( GetDataBack simple is garbage ).

On the other hand, "Power data Recovery" works with both FAT and NTFS and it is better at recovering image files. Another proven tools is "R-Studio" which has quiet good reputation among DR professionals. It's user interface is not newbie friendly but has lot's of options which no other tools offers.

Data Recovery from an External Disk with a Damaged File System

Read other 1 answers
RELEVANCY SCORE 48

I booted up my Win 7 computer today and ChkDsk said my Ex HDD may have been corrupted and proceeded to delete some files. Those were some very important files - how can I get them back? (Video and Adobe Premiere Pro CS4 files)

I prefer free methods on this - I know I can buy software to do this, but I currently don't have the money. Or a very cheap method, if nothing else.

It's ironic that today was the day I was going to back up this drive.

Please help!

A:External HDD data recovery - Chkdsk erased some data!!

"How To Recover CHK Files Created by CHKDSK and SCANDISK ? Raymond.CC Blog"
How To Recover CHK Files Created by CHKDSK and SCANDISK

Read other 9 answers
RELEVANCY SCORE 47.6

Hello,

Ive got a Dell inspiron 1420 and it currently will not start up. After initializing, it gives me the screen that states that it detected an unusual shut down (which it did initiAlly, the screen froze so I powered it off manually). But now it won't get past this recovery screen. It freezes so that I cannot move to the option to start in safe mode nor will it do anything when I press f8 during start up. It freezes on this screen as well.

I have no idea if I am infected let alone how to check if I can't even get on my computer. However, I may have operating info on this site from a year ago if that will help at all.

Any suggestions?? I'm a student and need this computer!!

Thanks.

Read other answers
RELEVANCY SCORE 47.6

My laptop using Vista was inadvertently turned off by the manual on/off switch. When I turned it back on all I can get is the Windows Error Recovery page. It states that Windows failed to start. A recent hardware or software change might be the cause. I select Launch Startup Repair and it just goes back the the original page. I have tried it in safe mode, entered Repair Your computer, I tried to boot from Vista CD, I tried manually. No matter what I do it always goes back to the windows recovery page. I'm stuck.
 

A:Solved: Window Error Recovery Can't start computer

My laptop using Vista was inadvertently turned off by the manual on/off switch.Click to expand...

It usually requires holding in the power button for about 5 seconds before a computer will turn itself off, so I'm somewhat surprised that you inadvertently turned it off.

What's the brand name and model name and complete model number of your laptop?

Is the Windows Vista disc you used the same version that's on the laptop's COA sticker?

Did that Windows Vista disc come with that laptop?

-------------------------------------------------------------
 

Read other 7 answers
RELEVANCY SCORE 47.2

So there I am sitting on my computer typing up an English assignment with AVG running a test on my computer, there was a Trojan in the list but I wanted to wait until it finished scanning everything. So suddenly the computer freezes, I try restarting but it goes to a black screen with my mouse visible and then gets stuck at the "welcome" windows screen. I immediately got on my laptop and started searching for possible solutions, so I came upon the Windows XP Recovery Console. I put in my xp cd, got recovery running, access my drive and started the recovery process. It got stuck at 54% and now I honestly don't know what options I have left without having to format everything and lose a ****ton if important Word Files. My comp OS is Windows XP if that's any help. Thank you for reading my post and I'm looking forward to a response.

Edit: trying Recovery again, it appears that it was just working very slowly so I've mistaken it for a problem. It's at 58% atm. What can I to solve my issue once the recovery process is finished?
 

A:Computer Won't Start Due to Trojan; Windows Recovery doesn't work

Recovery is finished, Do I just start windows normally again or what?

edit : restarted computer after it finished recovery, stuck at black screen still...
 

Read other 1 answers
RELEVANCY SCORE 47.2

hello,
I did a recovery system to my computer and when it was restarting i accidentally unplugg the computer so when i turn the computer back on, the computer starts with a message saying "setup is starting service" then i get another message saying "windows could not complete the installation. to install windows on this computer, restart the installation" i click ok on the message then i get another one just saying setup will continue after restaring your computer and is the same thing everytime i try to boost the computer. I'm not sure what to do or if I should just buy windows 7 home premium (which iswhat the computer came with) and install it but i'm not sure if this is the way to fix the problem can anyone give me any advice, also i've been looking at windows 7 Hp and there is the full version and the 64-bit - System Builder (OEM) which should i get?

thanks in advince.

A:computer won't start after using recovery system/windows couldn't inst

You don`t have to buy anything, you already bought windows with the pc.

Do you have an activation key somewhere on your pc ?

Read other 9 answers
RELEVANCY SCORE 47.2

(BTW if this is in the wrong forum then please tell me and then move as appropriate. Thanks.)

Yesterday I was trying to put my Packard Bell iMedia 1601 running Microsoft Windows XP Home Edition Service Pack 2 to sleep and I got a blue screen with the following error codes:

STOP: 0x00000024 (0x00190203, 0x835C7A98, 0xC0000102, 0x00000000)

Following that, I could not boot in any mode further than the Microsoft Windows XP loading screen, at which point the same blue screen was displayed.

Today I decided to go ahead with a Packard Bell Partial Recovery, which allows you to retain your data. At first the System Restore (on the first screen) and Partial Recovery (on the second screen) options were greyed out, and then System Restore randomly became available, so I tried that, got an error message, clicked "OK" the first time and closed it the second time and both times it restarted. Then Partial Recovery was suddenly available.

So I went ahead with that and when it came to the screen where it asked me what user I wanted to retain the only option was "No Profile". Thinking that my data would still be in the place the instructions said it would be (C:\documents and settings\[Chosen user name]) I went ahead with "No Profile". The recovery ran and the computer restarted, and Windows started up again as if it was the first time I'd ran the computer. So I created the two user accounts that had previously existed and then logged in with mine. A... Read more

A:Data recovery following Packard Bell partial recovery

clarification - does your documents and settings folder only shows your new accounts?

do you have two window folders? Try a windows search for your old profile folder and see what it comes up with.

Read other 5 answers
RELEVANCY SCORE 46.8

I have a 300gb Maxtor Drive partitioned into 4 drives...the OS on the hd was Windows Vista...While i was reinstalling XP i accidently formatted the whole drive because it didnt show the rest of the partitions on the screen...by the time i realized what i just did it was already 5% formatted...so i decided to stop it by turning off my computer...

i was wondering if the data (music, files, pictures, etc etc) is still recoverable...if so, what are the necessary steps that i should take to recover it...my friend sent me OnTrack 6.3 EasyRecovery Pro and i went out and bought Search and Recover 4...should i do a clean format on the drive and then run a data recovery software or should i run the software with the drive being 5% formatted...

if someone can lead me in the right direction i would greatly appreciate it...thanks

pete
 

A:Data Recovery Lost Data from format

Please do not post duplicates. With patience, you should get a reply to your post within 24 hours.
 

Read other 2 answers
RELEVANCY SCORE 46.8

Hi,

I have been using a Kingston 1gb data traveler to store work however as I was saving my word document to go home Word 2007 crashed and restarted itself, it did not however bring up any autorecover options. I therefore thought everything was ok and pulled out the USB. When I tried to plug this in again it says 'USB device not recognized' This device may have malfunctioned etc. It then proceeds to install the USB as an unknown device and appear like this in the device manager.

I desperately need to recover this data, I was designing a website and had 25 pages of text on the USB stick.

What I've Tried

Plugging the USB in another machine. This bought up exactly the same error

Downloading a Data Doctor Recovery Pen Drive tool. This however did not recognise a USB as being in the system and thus did not work.

Is there anything I can do to rescue this data?

P.s. I use Vista 32-bit Business.
 

Read other answers
RELEVANCY SCORE 46.8

I have a 300gb Maxtor Drive partitioned into 4 drives...the OS on the hd was Windows Vista...While i was reinstalling XP i accidently formatted the whole drive because it didnt show the rest of the partitions on the screen...by the time i realized what i just did it was already 5% formatted...so i decided to stop it by turning off my computer...

i was wondering if the data (music, files, pictures, etc etc) is still recoverable...if so, what are the necessary steps that i should take to recover it...my friend sent me OnTrack 6.3 EasyRecovery Pro and i went out and bought Search and Recover 4...should i do a clean format on the drive and then run a data recovery software or should i run the software with the drive being 5% formatted...

if someone can lead me in the right direction i would greatly appreciate it...thanks

pete
 

A:Data Recovery Lost Data from format

Don't know of any freeware ...
But I know someone who has recovered all of his data from a formatted drive using ..
http://www.runtime.org/

I know he tried some others ... but this one worked.
 

Read other 2 answers
RELEVANCY SCORE 46.8

I have a 300gb Maxtor Drive partitioned into 4 drives...the OS on the hd was Windows Vista...While i was reinstalling XP i accidently formatted the whole drive because it didnt show the rest of the partitions on the screen...by the time i realized what i just did it was already 5% formatted...so i decided to stop it by turning off my computer...

i was wondering if the data (music, files, pictures, etc etc) is still recoverable...if so, what are the necessary steps that i should take to recover it...my friend sent me OnTrack 6.3 EasyRecovery Pro and i went out and bought Search and Recover 4...should i do a clean format on the drive and then run a data recovery software or should i run the software with the drive being 5% formatted...

if someone can lead me in the right direction i would greatly appreciate it...thanks

pete
 

A:Data Recovery Lost Data from format

Closing duplicate, please reply here:

http://forums.techguy.org/hardware/594609-data-recovery-lost-data-format.html

eddie
 

Read other 1 answers
RELEVANCY SCORE 46.8

My desktop computer started (out of the blue) acting up with a "windows error recovery" screen on boot up. It gives me the choice to "Launch startup repair" or boot to windows normally. The first option does not fix it. It gives an error code 0x0. It leads to a dialog box that says system recovery options that gives some details and some advanced options, but it tells me it does not recognize my username and password! The second option, to boot to windows, gives me a BSOD. What to do.

A:Windows error recovery, Computer goest to "Start up Repair" and it can not fix the issue.

What version of Windows, please?

Louis

Read other 4 answers
RELEVANCY SCORE 46.4

For some reason my wireless internet connection deleted itself :s So i decided to do a system restore back to a previous point. This was successful and the wireless connection was setup again. However the same problem occured. when i attempted to do another system restore, the computer failed to boot. It turns on ok, but with a black screen showing a msg which says "initiating" some process, (sorry i forgot, ill post what it keeps saying when i get back home to the broken pc. )

The real problem i have now is when i went to my boot options, to do somthing like a reinstall, it asked for my admin password. This is normally no problem, but for some reason its not accepting my password, saying its invalid! I'm not sure if some virus has somehow changed my Admin password, because i am positive i am typing in the correct password!

I am locked out of my pc, unable to do any reinstall or anything Is there anyway i can restore my pc without losing the data? Even if i end up having to take it to some kind of pc repair shop, that would be preferable as there are some invaluable photos, documents etc. However i am a bit reluctant to give it over to someone else to repair it as the pc also some of my bank account details on there.

Is there any solution? Thanks in advance

A:Computer wont start up, Cant use recovery console or reinstall because it asks for Admin password

Hi booworthy,

It's an interesting problem, so getting the full error message would be helpful.

Zllio

Read other 11 answers
RELEVANCY SCORE 46

Hiya... I managed to lose one of my HDD's with all my multimedia on it and have been trying unsuccessfully to regain it with PCINSPECTOR.The HDD ISNT where my windows is installed and has become corrupted; something happened with the partition and it went kablooey.The problem i seem to be having with PCINSPECTOR is that it comes up with; for example "Cluster386.MP3" and it doesn't work. Is it something wrong with how im using PCI or something like that. I scan for drives...Choose "NONAME on FIXED DISK 2", scan for logical drives... and withing the first ten seconds it comes up with two partitions... Choosing the second one i get these files and the first one nothing. Scanning them for FAT. So basically am i using "PCI FR" properly am i doing something wrong and/or, is there a cheap, better alternative with results?Patch.Sorry guys bt i managed to fix this with the use of a different program... Awesome program I'm gonna plug it now "R Studio," well worth the investment... My Multimedia was worth the $80 odd...

Read other answers
RELEVANCY SCORE 45.6

I have had this problem many times before, when i hook up xbox and play xbox live our internet connection gets messed up and doesnt work. I set a restore point before i played the last time and when the internet stopped working i restored it to the point and it started working again on our main computer where the router is, but my computer in my room which is wireless is not working anymore. I formatted my hard drive on that computer hoping that it would fix the problem but it didnt. I have tried to get it working and have had no luck. The connection says that it is good but the internet does not work at all. It says "Cannot Find Server" when i try to get on internet explorer. The main computer is sending information but mine is not receiving the info.

Help me please
 

A:Main Computer Sending data but wireless computer not receiving data or internet

Hello! Welcome to TechSpot

I have some video files that helped me....wmv
thet are about 29mb's.
you are welcome to them..I just need a place to Upload them to...
G'Luck
 

Read other 1 answers
RELEVANCY SCORE 45.2

Hi all, i am requesting some technical assitance in solving this issue.

i have a hard disk that has been recently affected by [email protected] virus and all the .doc and xls files have been reduced to 1kb irispective of their initial sizes and when you open the files you get this error; DATA Error [47 0F 94 93 F4 K5]

I would like to recover the affected files to their original state, i have searched the internet over and no one seems to have the solution documented

currently i am trying to download QuickView Plus (Version 8), i have tried all aplications i can come across, including recover my files, winhex, get data back for ntfs, and r-studio.

i am honestly intrested in documenting the solution to this problem, and am intrested in suggestins on the best way to approach this

looking forward to your favourable reply.

regards
 

A:DATA Error [47 0F 94 93 F4 K5] Data Recovery

You will most likely need to restore those files from a backup. But don't do anything until you've made sure the virus is gone. Don't want to reinfect the files.
 

Read other 1 answers
RELEVANCY SCORE 45.2

Hi,

I have a larged data drive that failed a disk check. It stalls when starting stage two (I belive that is the verification of indexing). I have been able to back-up all of the folders except for a large folder of raw video. The PC locks up when I attempt to access/copy this folder (it appears to be part of the problem). I want to make an attempt to recover this data before reformatting the drive.

The check disk fails both at start up or if I run from the desktop both in regular and safe mode. Does anyone have tips for recoverying this data?
 

A:Data Recovery of data drive

You could try using a 98 boot disk and then run ntfsdos from there to access the ntfs partitions. Then try an xcopy of that file to another drive.

Another method could be to use Winrar to create a multipart archive and store it on another drive. This might chunk it up enuff.

Or boot to recovery console from the CD and then run chkdsk /r which marks any sectors that are corrupt as bad so they will not be used again, even after format. All take some time, but they are readily availalble fixes.

Alternatively, you could create an image of the drive and save that somewhere else, then run your drive manufacturers disk utility to check integrity of the disk.

Hope this helps
 

Read other 2 answers
RELEVANCY SCORE 44

I know a BIOS update on my Latitude with Windows 8 and Bitlocker activated on the O/S drive triggers Bit locker recovery on startup. I don't have the recovery key and so am stuck. How to recover without the Bit Locker recovery key?

A:BIOS update without suspending Bitlocker has triggered a recovery and on start up I am prompted for the recovery key

The solution I found was to install the previous version of the BIOS, but without being able to boot into Windows, I needed to install the previous version of the BIOS in DOS. Some server products provide a F12 boot up menu option to roll back a BIOS update, but this is not available in my Latitude.

I downloaded the correct BIOS version (the additional info section made specific reference to it being installable from Windows or DOS). I prepared a bootable USB key (to a dos prompt) and copied the bios installer executable to the memory stick.

Because secure boot (UEFI) is enabled, it is not possible to boot up from USB key, so legacy boot mode needs to be enabled. There were 3 settings that required changing in the BIOS before I was able to boot from the USB key.

Once I was able to boot into DOS from the USB key and got to the DOS prompt, I ran the BIOS update exe. The laptop rebooted, installed the previous BIOS version and then rebooted again. I pressed F2 to get into the BIOS and changed back the settings as they were (secure boot UEFI). I then managed to boot into windows without being prompted for the Bit locker recovery key.

You able to export or view the Bitlocker recovery key by going to Control Panel -> Security -> Bit locker Management, and temporarily suspend protection (until the next reboot). It is possible to run a commandlet to specify the number of reboots bit locker should be suspended for.

You may find that installing the previous version of the ... Read more

Read other 5 answers
RELEVANCY SCORE 44

Tech Support Guy System Info Utility version 1.0.0.4
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: AMD Phenom(tm) II X4 945 Processor, AMD64 Family 16 Model 4 Stepping 3
Processor Count: 4
RAM: 8183 Mb
Graphics Card: NVIDIA GeForce GTX 560 Ti, 1024 Mb
Hard Drives: C: 919 GB (245 GB Free); D: 11 GB (1 GB Free);
Motherboard: FOXCONN, ALOE
Antivirus: Avira Antivirus, Enabled and Updated

Background: A family member got mad and deleted all of my creative projects, then deleted them from Recycle Bin. (I caught them in the act, they are now penitent, and I'm going to change the computer's password to avoid future mishaps.) The hardest files for me to reproduce would be the dozens of psd files (Photoshop) into which I've sunk hundreds if not thousands of hours.

I've done nothing on the computer since then, except to sleep it, then turn it back on (after a power outage while it was asleep), plug in a flash drive with Recuva's portable version (recommended to me by a friend, this is my first time ever using it), and run it from the flash drive.

After deep scanning, Recuva finds the the files, but for the four psd files I most want to recover, Recuva notes, "The file's data could not be found on the disk."

Not only is this upsetting, it's also mystifying, given that I've done nothing else on the computer since the deletion.

My google fu (which admittedly is weak) turned up vague possibilities abo... Read more

A:Recuva Data Recovery: "file's data could not be found..."

OK, the ability to recover any data is inversely proportional to operating the system. The longer the system is ON, the less chance you have of recovering data.

The very first thing to do is STOP using the system. Pull the hard drive out and connect it to a working system. Now run data recovery software. I would use multiple programs; recuva is just one of them. What one finds, the other may or may not find. If you do not have another system, you can boot your system with a linux live usb. At least windows would not be writing to the disk in question.

Hopefully this can be a lesson. Data you do not have multiple copies of is data you do not care about and you should expect to lose said data. Drives fail, accidents happen. With a current backup, it is a non-event.
Personally I make four copies of important data; two on internal drives, a third on a NAS, and a fourth on an external that is stored in a safe. Maybe overkill however it only takes once loosing important data to make you paranoid about backups.
 

Read other 1 answers
RELEVANCY SCORE 43.2

I have a customer's NB200 on the bench. It came in with complete OS failure and would not boot from either the OS partition or the Recovery Partition.

I have checked the Hard Disk and it is in perfect working order. However it seems that all is not well as I cannot get it to boot from the recovery partition even after holding doen the 0 key.

I tried to instruct it to start from the BOOT.INI file by pointing a 'revoery' option at the partition but it just comes up with an error saying <Windows Path>\system32\HAL file is either missing or corrupt. Does anyone know how I should instruct the partition to start or how I could extract the information from the image files?

A:NB200-10G Recovery Partition - Cannot start recovery process

If you check page 48 in user?s manuals you will find exact description how to start recovery installation. The procedure on this NB200 is same or, at least, similar to all notebooks delivered with HDD recovery image. Please check it.

Useful document about HDD recovery installation you can find in ?How to..? category > http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=58

Bye

Read other 2 answers
RELEVANCY SCORE 42.8

Hi,
I?m looking for a Data Recovery company [not a Data Software company] to recover data on my drive that will not spin. Want to spend less than $1000. Please advise.

Thanks,
Joe
 

A:Recommend Data Recovery Company not Data Software Company

Best Data Recovery Company

I have visited many data recovery websites and evaluated their product.

But my experience with one data recovery is almost excellent.

Nucleus Data Recovery, the leading data recovery company having biggest range of professional data recovery software.

Their support is also excellent you drop a email for any help they will respond within 5 minutes.

To recover your data try Kernel Recovery for FAT+NTFS.

The DEMO allows you to preview the recoverable contents and you can check whether the file is recovered correctly or not by double clicking on it.
 

Read other 2 answers
RELEVANCY SCORE 42.4

Hi, I was wondering if anyone could help me with an issue I'm having in Vista.

I was trying to navigate to a webpage in Chrome, and then webpages started to refuse to load past a certain point (e.g. the tab would show the page's title, but the tab itself would be entirely blank). When this happened my computer started to freeze for periods of time, after which it would do whatever I had told it to (e.g. I clicked the "x" to close Chrome, which it did after several minutes) for about a second then freeze again.

I decided to restart the PC by holding down the power button. When I turned the PC back on I got the screen saying that one or more of my disks needed to be checked for errors, but I told it to skip the disk check (bad idea, I know, but I was in a terrible mood at the time and wasn't thinking too straight). The computer then froze on that screen, so I restarted it again.

After restarting it the startup repair program ran, as Windows would not start, and took a while checking for errors before asking whether I want to run system restore, which I do. After running system restore it gives me an error message saying:

"The instruction at 0x737e989e referenced memory at 0x00000000. The memory could not be read."

I then click on "OK" and the computer goes to a screen with six recovery tools on it (Startup Repair, System Restore, Windows Complete PC Restore, Windows Memory Diagnostic Tool, Command Prompt and Recovery M... Read more

A:Unable to start Windows Vista. Start up recovery producing error message

Do you get Blue Screens when this happens?
 

Read other 2 answers
RELEVANCY SCORE 41.6

I have an error that system32/hall.DLL is missing so I put in my windows 7 DVD ( I Have 4 DVDs for my windows, gateway, I always put the first one) so I could start start-up repair but when the windows files is loaded it keeps starting recovery mangment which gives me options to recover my hard drive to factory defaults (ie delete files on c and reinstall windows) ,why I don't get options to choose startup repair, how can I get it to start start-up repair?

A:can't start start-up repair, keeps starting recovery mangment

Hello kento24, welcome to Seven Forums!


Have a look at this tutorial linked below, starting at Step Three to see how to boot to the F8 startup screen, from there choose the "Repair My Computer" option to do the startup repairs and be sure to post back with any further questions you may have and to keep us informed.

Then look at the second linked tutorial for the process.


How to Boot to the Advanced Boot Options in Windows 7

Startup Repair - Run 3 Separate Times

Read other 3 answers
RELEVANCY SCORE 41.6

Hi,

Could someone please help me with my problem? I'm using Windows XP. I couldn't get it to load Windows it just kept going around and around to the start up process. I tried starting in Safe Mode and it wouldn't. My teenage son got an XP disk from one of his friends and I thought he was going to just boot it, but he reinstalled Windows XP and now all my stuff is gone. (I know I should be backing up to disks, BUT...)

Is there any possible chance I can get all my files back, or are they lost forever.

Hope you can help.

Thankyou.

Liz D
 

A:Data Recovery XP?

Read other 6 answers
RELEVANCY SCORE 41.6

hi guys please I need to know whats is the latest data recovery solution other than RAID
thanks in advance!
 

A:data recovery

Read other 6 answers
RELEVANCY SCORE 41.6

I had an old computer that ran into some issues a year ago and it stopped booting into windows. It had two hard-drives, both of which were running smoothly. Today I used an IDE to USB adapter and pulled data off of one of the drives. When I tried the second drive, it came up as unallocated and it wasn't initialized in the disk management screen. When I click to initialize it nothing happens...

So I loaded up Partition Table Doctor and attempted to rebuild the partition table. This worked and I was able to see a correct root file system. Upon restarting my computer I found that the drive still wasn't appearing in My Computer. So I loaded up Partition Table Doctor again and it still showed the correct root file system. I ran a check and it said to run fixboot. This resulted in a screen saying it was unable to fix the boot sector of the disk.

Any ideas?

I also ran recovery wizard and none of the partitions found in that seemed to match what the partition table doctor put together for a root file...
 

Read other answers
RELEVANCY SCORE 41.6

Ok so in not very tech savvy. I had a tablet that had a ruined screen so my somewhat tech savvy buddy (who is not available as he is currently overseas) who removed its hard drive? And gave me a cord that he said would connect it to my PC so I could recover the data (namely my videos and pictures of my daughter) but my PC is not showing anything when I connect it, do I need software as well or ?? Any help truly appreciated!!!! Pics cord and hard drive included.
 

A:Please help if you can; data recovery ?

Read other 6 answers
RELEVANCY SCORE 41.6

Hi! I'm getting into data recovery---bought a program to do it. What I'd like to know is if this hard drive:
5400 RPM Western Digital 120 GB SATA
2.5" Moving Star USB 2.0
External Portable Hard Drive
can be used for data recovery. Since it's a SATA drive, will it work with a computer that has an IDE drive? Also, will it work on a computer that has a 1.1 USB port? I'm looking for info since I've found a good deal on this drive. I figure I can use this drive to recover the data, then either transfer the files to a new hard drive, or burn them to cds or dvds. Any and all responses are appreciated. Thanks.
 

A:Data Recovery

Read other 10 answers