Over 1 million tech questions and answers.

Hyper V Virtual Ethernet Adaptor loses default gateway server 2012

Q: Hyper V Virtual Ethernet Adaptor loses default gateway server 2012

When I create a virtual switch on hyper v, i lose network connectivity and the default gateway is missing
I have to manually put the default gateway in and disable and re enable the network adaptor each time the server restarts in order to get network connectivity. I am running windows server 2012

I have tried deleting the virtual switch on hyper v, deleting the network adaptor and reinstalling it and creating the virtual switch again

Any help would be great

Thanks

Read other answers
RELEVANCY SCORE 200
Preferred Solution: Hyper V Virtual Ethernet Adaptor loses default gateway server 2012

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

RELEVANCY SCORE 82

Hi, 
Can someone help me with this info?
How this should be configure on the hyper-v host and the VM?
The switch is already configured.
Thank you very much,
Yakir

Read other answers
RELEVANCY SCORE 80.8

SIR, When I have installed windows sdk manager the i found new drivers in my network adapters are they harmful to wifi connections or there is no damage for the connections 
Even When i am unistalling them it is not getting unistalled it is showing the same dialog box of unistalling if it is not useful then say the means how to unistall .If it is useful then  i m safe

Read other answers
RELEVANCY SCORE 79.2

Heya so I installed hyper-V on my other computer because I wanted to get a program to work on it (googled how to get my Reason to work on windows 8). Since I couldn't find the suggested setting to just turn some hyper-V settings on I thought I dont have it on my computer. After installing Hyper-V though my computer went server mode and I have no experience of that. Now I want to remove it from my comp but dont know how and googling doesn't help :S I dont mind formatting the computer, nothing too important there and after the uninstallation of Hyper-V I will install xp on it too. Didn't like W8 tbh.

Thanks in advance!

A:Uninstalling hyper-V server 2012

Nobody knows? There doesn't seem to be a solution, at least one that I can google or I am just blind. But please help! I just want to use my computer again :/

Read other 8 answers
RELEVANCY SCORE 79.2

Hey guys,

This is the first time using the forum so I apologize if this has been put in the incorrect place. My brother recently installed Hyper V Server 2012 r2, which boots up everytime I start my laptop. I just want help in how to completely remove the software and help get back my Windows 8. Neither me or him know how to get back to windows 8.

Thanks in advance guys.

A:Help with Windows Hyper V Server 2012 R2

Well, you must have a bootable Windows 8 DVD or USB. Go to the BIOS settings, select to have the DVD or USB device as first device. Then it should say "Press any key to boot from CD or DVD..." if you have a DVD or it will show the OEM or Windows logo directly (USB). When you are prompted for the installation type, choose Custom. Make sure you have backed up your files. Delete every partition of Disk 0 and then choose the Unallocated Space to install.

I hope this helps you.

Read other 4 answers
RELEVANCY SCORE 79.2

Hello Friends, I am building a programming project and would require a Virtualization software to try it. So, I thought to get the Standalone Hyper-V Server 2012. So, does anyone know how to get them? I have heard that they are a standalone Operating System then installs on the Hard Drive and run like an OS.

Please also provide a link to Download it and the installation guide.

Thank You................

A:How To Get Microsoft Hyper-V Server 2012?

Hi there
Google should work in India -- maybe they don't have it any more -- took me 2 secs to get the links.

31 Days of Our Favorite Things: Get Happy over the Free Hyper-V Server 2012 (Part 9 of 31) - Matt Hester's WebLog - Site Home - TechNet Blogs

Cheers
jimbo

Read other 2 answers
RELEVANCY SCORE 78.4

Upon rebooting my computer, it gets stuck at cmd, and if I try to restore the system by pressing f8 or f11, it eventually takes me back to the same screen after rebooting again. At this point I don't mind deleting all of my files, and reinstalling Windows, however I don't know how. Every time I try, the problem persists. Please help me, and I thank you in advance.

Read other answers
RELEVANCY SCORE 78.4

so my brother installed ms hyper v server 2012 r2 on my computer and now has completely messed it up i cant even see the desktop i need tips on how to solve this reply to this thread or add me on facebook if you can help please
fb=laith joseph (teemo)

Read other answers
RELEVANCY SCORE 77.6

i have a hyperv server running on windows server 2012 platform, and i have a virtual machine configured on it.
i have created 2 virtual switches one for internal LAN and the other one it for WAN access.
this VM  will work as transparent bridge, so i have disabled the Allow Host to share network connection option on both Virtual switches.

now when i disconnect the cable from one interface the virtual switch keeps connected and the virtual machine does not detect that the cable is disconnected.

please advise.

Read other answers
RELEVANCY SCORE 76.8

This is my last ditch attempt to try to resolve this before replacing a HP DL385P Gen8 server running about 27 VM's.

The BSOD has occurred 5 times since 8/2/2016 with no apparent rhyme or reason.

I tried running the DM Log Collector Tool, but the zip file it created on the "desktop" was empty. I assume it's because it's a Hyper-V Server with no GUI.

The server has all of the most recent firmware (including BIOS), drivers and Windows Updates.

Attached are the two most recent mini-dumps. Any help would be greatly appreciated.

Read other answers
RELEVANCY SCORE 76.8

Hi All, I use a P50 (20HHCTO1WW, BIOS 1.17 dated 12/13/2017, FHD, i7-7700HQ, RAM 64GB, Boot disk: Samsung 850 EVO M.2 SATA 500GB, Work disk: Samsung 960 EVO M.2 NVMe 1TB, Data disk: Seagate Firecuda SMR HDD ST2000LX001 2TB. I use this laptop for development of systems on top of virtual machines, stored on the NVMe SSD. These virtual machines are set to access network and internet through a virtual switch setup on top of the P50 WLAN interface. I would like to share regarding crashes I got after performing system update on Lenovo Vantage yesterday. After performing two updates (Intel Online Connect and Intel 8265 WLAN driver) on 1/16 6:09AM early morning, a BSoD occurred on 9:03AM. Upon checking the memory dump using windebugger, the issue was invalid memory read access initiated by vmswitch (Hyper-V Virtual adapter). Installed vmswitch.sys on my P50 is version 10.0.16299.192, time stamp 1/8/2018 5:32AM. Quite new. Upon checking for possible causes, I read on other forum regarding suggestion to disable VM queue on each network interface on all VMs. I changed these right away.  However, on 5:06PM same day, a second BSoD occured. This time the memory dump writing somehow failed, hence I lost the latest dump and also the previous dump (as it is overwritten by the last BSoD process). The bugcheck details from both crash occurences as registered on Event Log are similar thou. As disabling VMQ didn't solve the BSoD problem, I removed the Intel 8265... Read more

Read other answers
RELEVANCY SCORE 76.8

Hi All,

Getting a strange error with Hyper-V on Windows 8 Pro x64.

When I try and add a virtual switch I get:

Error Applying Virtual Switch Properties Changes
Failed while adding virtual Ethernet switch connections.
Ethernet port '{a bunch of stuff}' bind failed: The data is invalid.
(0x8007000D).

There doesn't seem to be much on google that relates to this (in particular the bind failed: the data is invalid part).

Anyone have a clue what the cause might be?

Cheers

A:Hyper-V Error Adding Virtual Switch - Ethernet Port Bind Failed

can be many thing, in 3 or 4 years that I'm using Hyper-V I never encounter it, you need some networking knowledge to play with virtual switch, but usually 0x8007000D error are due to files corruption or permissions, try to run hyper-v management as admin.

Read other 7 answers
RELEVANCY SCORE 76.4

After i updated to Windows 8.1 Enterprise from Windows 8 Enterprise, Hyper-V does not function correctly.
When I add an iso image to a new virtual server or start one of my existing, I can see the iso file is loaded in the bottom thumbnail.

But when I connect to the virtual server it just says: Connecting to virtual server... and it times out after 5minutes.

All my virtual servers are running locally, they are able to start and are running fine, I just cannot connect to them.
Also the ability to turn virtual servers off tends to hang and I have to kill the processes and restart the services for it to stop.

Does anyone know of a workaround for this problem?

A:Hyper-V stuck at connecting to virtual server

Hi there,

If you are running VM(s), the Host VM should have plenty of RAM, just trying to confirm.

Have you tried shutting off some of your VMs, and try to run one for now, then connect to it?

Read other 4 answers
RELEVANCY SCORE 74.8

Hi ATA Team,
 
Scenario:

Source: vNIC of VMs Domain Controllers hosted on Hyper-v Clusters. DCs are configured on different VLANs. A trunk port is configured between Hyper-v clusters and Data Center switch.
Destination: a dedicated NIC on ATA Gateway that installed on a physical server connected to the same DATA Center SwitchData Center Switch: Cisco.

Question:
 How to configure spanning traffic from Domain Controllers to ATA Gateway on this case?

Thanks,

Read other answers
RELEVANCY SCORE 74.4

Every 5 minute two  vmg.temp files are creating into windows 2012 standard Hyper V base server, please help ..

Read other answers
RELEVANCY SCORE 72.4

I first tried resetting the modem which worked after about 5 tries, I then woke up the next day and it went back to "unidentified network" "no network access"
Here are the results from "ipconfig/all" if this helps.

Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : home

Wireless LAN adapter Local Area Connection* 2:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft Wi-Fi Direct Virtual Adapter
Physical Address. . . . . . . . . : 60-36-DD-FE-34-0F
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes

Ethernet adapter Ethernet:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Realtek PCIe GBE Family Controller
Physical Address. . . . . . . . . : 6C-3B-E5-85-F8-22
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::f0c8:c332:6ef8:3c0c%2(Preferred)
Autoconfiguration IPv4 Address. . : 169.254.60.12(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.0.0
Default Gateway . . . . . . . . . :
DHCPv6 IAID . . . . . . . . . . . : 40647653
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-1F-13-B9-6B-6C-3B-E5-85-F8-22
DNS Servers . . . . . . . . . . . : fec0:0:0:ffff::1%1
fec0:0:0:ffff::2%1
fec0:0:0:ffff::3%1
Net... Read more

A:Ethernet Has no Default Gateway

Are you wanting to connect via hardwire? i see your WIFI is pulling an IP address from the gateway. What kind of modem is this, ISP or are you adding a new piece of hardware?
 

Read other 3 answers
RELEVANCY SCORE 72.4

Like a lot of people on this forum I am having a problem of always disconnecting from my internet in intervals of like 10 - 20 minutes. This only happens when I am connected by an ethernet cable,but when I am using wifi everything seems to be okay. I have a razer blade 14 2013 using a usb to ethernet adapter from inateck and is running windows 8.1.

A:the default gateway is not available Ethernet

There is not a lot of people on this forum that are having disconnect issues with Internet or LAN. Every person's problem is always different why it happens. You cannot compare your issue to the issue that others have had.

Read other 2 answers
RELEVANCY SCORE 72

Windows XP does not assign a WINS Server, DNS Server, or Default Gateway.

Here is the output from ipconfig /all:

Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.

C:\Documents and Settings\Lon Hoss>IPCONFIG /ALL

Windows IP Configuration

Host Name . . . . . . . . . . . . : omnibook-6100
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Unknown
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

Ethernet adapter Local Area Connection:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Intel(R) PRO/100 VM Network Connecti
on
Physical Address. . . . . . . . . : 00-C0-9F-09-00-6D
Dhcp Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Autoconfiguration IP Address. . . : 169.254.237.137
Subnet Mask . . . . . . . . . . . : 255.255.0.0
Default Gateway . . . . . . . . . :

C:\Documents and Settings\Lon Hoss>
 

A:Windows XP does not assign a WINS Server, DNS Server, or Default Gateway

Read other 9 answers
RELEVANCY SCORE 71.2

My sister's HP Laptop is acting up. Every network that I try to connect to, it manages to connect to the network and receive an IP address, however it does not get the following:

default gateway
DNS sever
WINS server

It's running Vista 32Bit Home Edition, and I have tried resetting to factory defaults to no avail. Also, I have tried connecting to many networks all ending with the same problem... Any ideas?

Read other answers
RELEVANCY SCORE 70.8

Hi,
Firstly i have searched this forum plus other sites on the internet and cannot find a solution that works for me.
I am using an ethernet connection to my router (Netgear WNR2000 supplied by virgin media). I am running windows 7 professional (i have just reinstalled and this is when the problems started, before everything was fine).
I have an ASUS Formula Crosshair II motherboard and im using the onboard ethernet port, which is nvidia/nforce.

Every so often, seems to be random timing, my LAN connection will drop and when using the troubleshooter it says no default gateway was found and it fixes it. Then i can be ok again for a little while. As mentioned above this only started when i reinstalled windows 7. My old installed worked fine.
I have tried reinstalling/updating the drivers, i have also tried letting windows choose the drivers, both have the same result.

In the event logger when i get disconnects i get an error similar to this:





Quote:
Log Name: System
Source: Microsoft-Windows-DNS-Client
Date: 17/04/2011 12:06:29
Event ID: 1014
Task Category: None
Level: Warning
Keywords:
User: NETWORK SERVICE
Computer: ALEX-PC
Description:
Name resolution for the name imap.googlemail.com timed out after none of the configured DNS servers responded.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows... Read more

A:No Default Gateway - Ethernet connection keeps dropping

My first reply did not post properly, so this is the shorter version because I am lazy and I do not want to retype

i had the same thing happen to me a month ago after changing routers.

Hard Reboot (press and hold reset buttons for 90 seconds , differs per device, then unplug everything and rework your ethernet jacks too after your reset your devices)
*Modem (remove battery if there is one,press and hold reset buttons for 90 seconds , differs per device )
*Router (press and hold reset buttons for 90 seconds , differs per device)
also try this if you dont want to call your ISP for a new IP
*then unplug everything and rework your ethernet jacks too after your reset your devices

Another method would be winsock reset and the following below
ipconfig /flushdns
ipconfig /release
ipconfig /renew

if that doesn't work, call your ISP and they will fix the problem

Sorry for the quick reply with lack of depth. gotta go to work.

Read other 4 answers
RELEVANCY SCORE 69.6

Hi all,

I am trying to use to my office laptop in home to connect to the
broadband.

It was working fine since last week and now unable to ping the
default gateway itself.

I am using a IBM thinkpad T41p with Intel pro 1000/T mobile ethernet card.

Below is the details ...

Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.

C:\Documents and Settings\hsethura>ipconfig/all

Windows IP Configuration

Host Name . . . . . . . . . . . . : harryr
Primary Dns Suffix . . . . . . . : uk.mydomain.com
Node Type . . . . . . . . . . . . : Peer-Peer
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : uk.mydomain.com
netvigator.co.uk
mydomain.com

Ethernet adapter Wireless Network Connection 4:

Media State . . . . . . . . . . . : Media disconnected
Description . . . . . . . . . . . : 11a/b/g Wireless LAN Mini PCI Adapter
Physical Address. . . . . . . . . : 00-05-4E-42-B0-CB

Ethernet adapter Local Area Connection 6:

Connection-specific DNS Suffix . : netvigator.co.uk
Description . . . . . . . . . . . : Intel(R) PRO/1000 MT Mobile Connection
Physical Address. . . . . . . . . : 00-0D-60-89-71-B8
Dhcp Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IP Address. . . . . . . . . . . . : 83.216.64.23
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 83.216.64.252
DHCP Server . . . . . . . . . . . : 81.91.195.253
DNS Servers . . . . . . . .... Read more

A:unable to ping default gateway - home ethernet broadband

Could some of the TCP/IP settings have been changed, or perhaps a firewall installed that is configured for the office network?
 

Read other 1 answers
RELEVANCY SCORE 69.2

Hi,
Not sure where to create a bug report or to get confirmation that this is a bug so I thought I'd start here.
I've noticed that the values in Perfmon for Process::Virtual Bytes are radically different for a number of processes when running on Windows 10 / Server 2012 than, say, Windows 7.
As an example I'm tracking Virtual Bytes the process Services for both operating systems, and Windows 10 (and Server 2012) is reporting 2,199,069,044,736.000, and Windows 7 is reporting 50,900,992.000. Obviously the machines are processing different
loads but the difference in magnitude of 100,000 seems a little extreme.
I also see the same issue with the processes svchost, WmiPrvSE, Isass, MicrosoftEdgeCP, explorer, MsMpEng, MicrosoftEdge, dwm, csrss, Taskmgr, RuntimeBroker where they're all showing a value of greater than 2,000,000,000,000.
I don't see it, oddly enough, with java, firefox, or system.

Read other answers
RELEVANCY SCORE 69.2

Hi All,
A week ago we had tried to install ATA Gateway 1.8 on our server core Domain Controllers but it had failed. This bug was apparently fixed in 1.8 update 1 (listed
here)
However now when we install it on core the installer fails without erroring. I have looked into the ATA deployment log which has the following in it:
[6A6C:5944][2017-08-09T21:59:54]i000: 2017-08-09 20:59:54.1044 27244 5   Debug [\[]DeploymentModel[\]] [\[]DeploymentAction=Upgrade[\]]
[6A6C:5944][2017-08-09T21:59:54]i000: 2017-08-09 20:59:54.4013 27244 5   Error [\[]GatewayBootstrapperApplication[\]] Failed to create deployment manager [\[]exception=System.ArgumentNullException: Value cannot be null.
Parameter name: path1
   at System.IO.Path.Combine(String path1, String path2)
   at Microsoft.Tri.Gateway.Deployment.Bundle.UI.Application.GatewayUpgradeDeploymentConfiguration.GetMandatoryConfiguration(String installationPath)
   at Microsoft.Tri.Gateway.Deployment.Bundle.UI.Application.GatewayUpgradeDeploymentConfiguration..ctor(Engine engine, String installationPath)
   at Microsoft.Tri.Gateway.Deployment.Bundle.UI.Application.GatewayDeploymentModel.CreateDeploymentConfiguration(Engine engine)
   at Microsoft.Tri.Deployment.Bundle.UI.Application.DeploymentModel..ctor(BootstrapperApplication bootstrapperApplication, ProductComponent productComponent, String productFullShortName, String productFullLongName, String productFullLongDispl... Read more

Read other answers
RELEVANCY SCORE 68

Can anyone explain why the first packet is to the default gateway and not the DNS server?

I have a client machine set up
IP 192.168.1.2
default gateway 192.168.1.1
Primary DNS server 192.168.1.53

What confuses me, is when I clear the NetBIOS and DNS cache, and then try to ping another computer on my network by name,
eg 'ping computer2'

The first packet sent is a DNS packet, requesting the IP of computer2.mydomain.com
But it is sent to the default gateway

The next packet is the same but sent to the IP I have said is the DNS server, this the packet I expected to see first.

Can anyone explain why the first packet is to the default gateway and not the DNS server?

Hope that is the only required information. If you think you can answer, with more information, just ask.
 

Read other answers
RELEVANCY SCORE 68

Hi,
I have been having some trouble with my internet for awhile now. It fine one second and than it will get really slow and eventually stop working. When I troubleshoot to see what the problem is it either gives me DNS server is not responding or default gateway is not available, sometimes it will give me both. It says it fixes the default gateway problem but it will show up again 5 minutes later. If someone could help me that would be awesome

Here is my ipconfig /all
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.

C:\Users\MNO>ipconfig /all

Windows IP Configuration

Host Name . . . . . . . . . . . . : MNO-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

Wireless LAN adapter Wireless Network Connection:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : 802.11n Wireless LAN Card
Physical Address. . . . . . . . . : 9C-B7-0D-FD-26-20
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IPv4 Address. . . . . . . . . . . : 192.168.0.9(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Lease Obtained. . . . . . . . . . : Friday, September 28, 2012 10:15:02 PM
Lease Expires . . . . . . . . . . : Friday, September 28, 2012 11:15:19 PM
Default Gateway . . . . . . . . . : 192.168.0.1
DHCP Server . . . . . . . . . . . : 192.168.0.1
DNS Servers . . . . . . . . ... Read more

A:DNS server not responding and default gateway is not available

Read other 7 answers
RELEVANCY SCORE 68

Sometimes I have internet connection for a few seconds, if I'm lucky maybe three minutes. I can get two different messages when I run the Windows Troubleshooting option: "DNS server isn't responding" or "The default gateway is not available." This has been going on about a week. I have not made any changes to my laptop, not even a Windows update, or a driver update, or anything like that.

I have a Toshiba Satellite L655 laptop. I'm running Windows 7 Ultimate 64-bit. I live in a rural area that does not have home telephone or internet lines, so I access the internet using a 3G data card. There is only one small spot in my house that receives a signal so I have a Zoom Travel Router that I plug the data card into and then use my computer in a different room in the house. This setup has been working great for almost two years.

Below is the coding in the ipconfig file. It's pretty short. The default gateway is the ip address for the Zoom Router as provided in the User Manual. I talked to my ISP provider and they said they could only help me if I plugged the data card directly into the computer. They could not or would not help me if I used a Wifi router.

If you tell me I need to make changes to the ipconfig file, then you will have to tell me how to do that. I'm not afraid to make changes, I'm just not techie enough that I know how to do it.

Any help you can give me will be greatly appreciated. I hate being without the internet.

... Read more

A:Default Gateway Not Available and/or DNS Server Not Responding

I doubt that I know enough to help you, but maybe I can help gather info so that others can help you.

Please run this code from the command prompt window:

Code:
ipconfig/all > %UserProfile%\Desktop\IP.txt
edit: you can copy the info in the code box above and...
...paste it into a command prompt window as shown in the video below.

That should create a text file on your desktop.

Please attach that text file to your next post.


These tutorials might help you:

Command Prompt

Screenshots and Files - Upload and Post in Seven Forums

edit:

Read other 7 answers
RELEVANCY SCORE 68

Correct me if I'm wrong

(Working with old computer, getting it to work)
I was having problems with re-installing Windows XP and SP1-3 updates, and connecting to internet.and getting DNS errs.
Went into ipconfig, and had no default gateway

So, I eventually found my way to windows error reports,doing a search:
for "setuperr"

Turns out the "computer name" had errors in it with non-allowed characters.
Went into Control Panel, clicked on System, did the fix.
No underlines, etc. allowed

Looking into setuperr logs is really helpful, dont ya think?
 

Read other answers
RELEVANCY SCORE 67.2

I have one Linksys router serve as a default gateway (192.168.0.1).
But now I want my another linksys WRT54G (192.168.0.5) to be the DHCP server, not the Gateway.
The DHCP works, but once the computers get the IP from the DHCP server, the gateway shown is 192.168.0.5.

Is there any way to make it the DHCP server not the default gateway?
How to or what to set at the WRT54G so that the default gateway will be 192.168.0.1?

This is the diagram showing my network.
Please advice....

Code:

Modem
|
|
|
(Gateway) (DHCP)
192.168.0.1 --------- Linksys WRT54G (alternative: Netgear WGR614)
| 192.168.0.5
|
|
|
(switches)
| |
| |
| |
PC1 PC2...
 

A:How to make a DHCP server not the default gateway

You can set Default Gateway in the 192.168.0.5 router to be 192.158.0.1 if you so choose, it's on the Settings tab.
 

Read other 3 answers
RELEVANCY SCORE 67.2

I am running Windows 7 64-bit. My Internet connection keeps getting dropped, and when I run the troubleshooter, I can get two different messages: "(DNS server) is not responding" or "The default gateway is not available." When I get the former, I have to restart my router. Any amount of time later, my connection is dropped again. It can be a day or just a couple of minutes.

I'm using an Arris DG860A provided by time warner cable. Seems to drop more frequently when i run a P2P program. I also thought about upgrading my Realtek PCIe GBE Family Controller from version 7.50.1123.2011 to version 7.073.0723.2013

Here is my ipconfig /all:

Windows IP Configuration

Host Name . . . . . . . . . . . . : Richard
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : socal.rr.com

Ethernet adapter Bluetooth Network Connection:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Bluetooth Device (Personal Area Network)
Physical Address. . . . . . . . . : E0-06-E6-31-0A-90
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes

Ethernet adapter Local Area Connection:

Connection-specific DNS Suffix . : socal.rr.com
Description . . . . . . . . . . . : Realtek PCIe GBE Family Controller
Physical Address. . . ... Read more

A:Internet keeps going out: Default Gateway and DNS Server error

Hello,

Please post speedtest for review.
Speedtest.net by Ookla - The Global Broadband Speed Test

By any chance are you aware if others are heavily utilizing the bandwidth like P2P, video streaming or heavy gaming.

Read other 2 answers
RELEVANCY SCORE 67.2

Hello.

On my W2K server I have two NIC's, one for the external connection to the internet, and one for the internal connection to my workstation. I was messing around (computers and beer, bad...) so I'm not sure what I've done, but here are the details.

On the internal NIC I've specified an ip of 198.162.255.1, a subnet mask of 255.255.255.0 and a default gateway of 198.162.255.1 (I'm assuming the default gateway, because the server is cabled directly to the workstation, is the IP of the server.). Using a default gateway that matches the IP of the server was working, but now when I ipconfig the default gateway is blank. Furthermore, when I ipconfig on the workstation, it picks up an IP from DHCP, but again the gateway is blank. The workstation and server cannot communicate other than the workstation grabbing the IP address.

Can anyone make any suggestions that might lead to a resolution? I'm fresh out of ideas.

Thanks in advance.
Kevin
 

A:Troubles configuring default gateway W2K server

Change the third octet of your addresses to something other than 255.
 

Read other 3 answers
RELEVANCY SCORE 67.2

Hello, I have installed hyper-v on a lenovo thinkpad t470 (and tested this problem on 3 other t470 thinkpads). The thinkpad has: a) an Intel RJ45 adapter b) a Sierra wireless adapter EM7455 c) an Intel wireless 8265 adapter Hyper-v does work correctly as long as there is an RJ45 Ethernet cable connection plugged in (and connectivity). When you remove the RJ45 connectivity it instantly disables the wireless adapter (intel 8265), whatever you try the wireless adapter remains unusable. As a test, I also upgraded the intel 8265 adapter to an intel 9260 adapter ... but the problem remains. I have to say that they both use the same intel driver. If you try to enable the device in the computer management console, it is instantly disables it again after a few seconds. This seems to be specifically related to the lenovo t470 laptop as we don't have that kind of problems on other laptops. I also tried to enable/disable some BIOS options etc ... Has anyone experienced similar issues or has any ideas how to solve the problem? I would really appreciate some help as I have absolutely no ideas ... what else to try. Here was my original post in the Microsoft forums ... but that didn't help either: https://social.technet.microsoft.com/Forums/azure/en-US/939f4a3b-9d3e-4f10-8384-189d952a4b5e/hyperv-... Thank you very much! Kind regards, Didier

Read other answers
RELEVANCY SCORE 66.8

Hi,
 
We've recently installed Server 2012 on a new Lenovo ThinkCentre M700 and unfortunately it's unable to pick up the network adapter. We tried the Windows 8.1 versions of the network drivers from the Lenovo site (as they share the same kernel) but they didn't work.
 
Have also tried downloading the server 2012 versions of the specific drivers direct from Intel's website.
 
Has anyone had any luck finding a server 2012 network driver for this machine? 
 
Thanks













Solved!

Go to Solution.

A:ThinkCentre M700: Ethernet Network Driver - Server 2012 & 2019 - Intel I219-LM

m700 wrote:
Have also tried downloading the server 2012 versions of the specific drivers direct from Intel's website.

What is the issue with the drivers downloaded direct from Intel?  
 

Read other 5 answers
RELEVANCY SCORE 66.4

My desktop computer was not connecting to the internet even though there was a connection. I ran a diagnostic test and it said that my default IP gateway, DCHP server and DNS server all failed. I don't know how to fix this problem so I did several things. I did an ipconfig release/renew in the cmd promt, I manually typed in my ip address, subnet mask and default gateway and i erased and added the same wireless connection and still nothing happened. Then I logged into my router on another computer and changed the data encryption from WPA to WEP so I can get on the internet with my laptop since my laptop did not support WPA encryption and walla I was able to connect to the internet on my desktop. I am not sure how changing the encryption from WPA to WEP has anything to do with a failure from my DNS and DCHP server and default IP gaeway. Can someone explain so I can understand this?
 

A:very confused: default gateway, DCHP and DNS server failure

Read other 11 answers
RELEVANCY SCORE 66

Hey,

So I'm somewhat of an idiot when it comes to computers, and I'm having quite a hard time here.

I currently have 3 laptops running on a D-Link DIR-615 wireless router.

2 of them are running fine, but the 3rd one can't connect to the Internet. Well, sometimes it will for a few seconds, but most of the time, it will time out, and Internet's always dropped.

When I ran a Intel PROset/Wireless Manual Diagnostic, all the test pass except for the Ping Test. Sometimes, it will say "Response: Default Gateway, No Response: DHCP server", although most of the times, both have no response.

Here's the interesting thing: I have the laptop for about 6 weeks now. At the beginning, it worked perfectly well. After 4 weeks, Internet kept crashing. Did a system restore, and Internet worked for a few days ...then, out of the blue, started crashing again, and now I can't connect ever (even though I always show a strong signal reception on my icon).

I have no idea what to do here. I've been going through forums, tried the following:

- Changing wireless channel
- TCP/IP stack repair options
- Calling Dell (what a joke that was...)

I just don't understand why one laptop doesn't connect (even though it did 3 weeks ago without problem) and the 2 other ones work great ...my roomates are getting tired of me borrowing their laptops, so I need to figure this out!
PLEASE HELP !!!

Thanks !!

PS: I'm running on a Dell laptop with Win7 .... Read more

A:Ping Test: No Response: Default Gateway, DHCP Server

Read other 16 answers
RELEVANCY SCORE 66

Hey,

So I'm somewhat of an idiot when it comes to computers, and I'm having quite a hard time here.

I currently have 3 laptops running on a D-Link DIR-615 wireless router.

2 of them are running fine, but the 3rd one can't connect to the Internet. Well, sometimes it will for a few seconds, but most of the time, it will time out, and Internet's always dropped.

When I ran a Intel PROset/Wireless Manual Diagnostic, all the test pass except for the Ping Test. Sometimes, it will say "Response: Default Gateway, No Response: DHCP server", although most of the times, both have no response.

Here's the interesting thing: I have the laptop for about 6 weeks now. At the beginning, it worked perfectly well. After 4 weeks, Internet kept crashing. Did a system restore, and Internet worked for a few days ...then, out of the blue, started crashing again, and now I can't connect ever (even though I always show a strong signal reception on my icon).

I have no idea what to do here. I've been going through forums, tried the following:

- Changing wireless channel
- TCP/IP stack repair options
- Calling Dell (what a joke that was...)

I just don't understand why one laptop doesn't connect (even though it did 3 weeks ago without problem) and the 2 other ones work great ...my roomates are getting tired of me borrowing their laptops, so I need to figure this out!
PLEASE HELP !!!

Thanks !!

PS: I'm running on a Dell laptop with Win7 ...the other laptops, we hav... Read more

A:Ping Test: No Response: Default Gateway, DHCP Server

and welcome to the Forum

Is yours farther from the router than the others? Have you installed the newest driver for the wireless adaptor?

Lets take a peek at your network environment:

First:

Power Cycle everything . . Turn off the Modem, router and all pc's . . turn on the Modem and wait a few minutes for the lights to stabilize . . then turn on the router, then one pc at a time. See if you connect to the internet.

Then:

Remove all the stored wireless network profiles and search for the network again.

How to Remove Stored Wireless Network Profiles for XP, Vista, and Windows 7

Then: check your browser's settings, remove any proxy settings if found here's how.

Then:

with the pc connected to the router, Click on Start . . Run . . type CMD

At the > prompt type type the following command: IPCONFIG /ALL


Note that there is a space before the /ALL, but there is NOT a space after the / in the following command.

Right click in the command window and choose Select All, then hit Enter. Come back here and Paste the results in a message.

If you are on a machine with no network connection, use a floppy, USB drive, or a CD-R disk to transfer a text file with the information to allow pasting it here.

then please Download and run this Xirrus Wi-Fi Inspector, click the Networks link on the upper left and paste a screen shot of that screen here. Note that this application requires NET Framework to run. If you ge... Read more

Read other 1 answers
RELEVANCY SCORE 65.2

I have a small network with a multi-homed server. The 1st NIC on the server has an IP address of 192.168.2.1 and the default gateway was set to 192.168.2.7. The Second NIC card has an IP of 10.0.2.7 and no default gateway given. The client PC's are configured for DHCP, and when they log in, are successfully given an IP address and the default gateway I assigned on the first card.
However, here is where my problem lies:
The server can ping both cards
The clients can only ping the 1st card.
Neither the Server or clients can ping the default gateway.

I have RIP installed, and IP Forwarding marked, so I can't understand why the default gateway is not working.

Anyone know anything on this?
 

A:{Solved} - Unable to Ping Default Gateway on Multi-homed Server

Greetings

Ok... since you have not given all the information, let me make a guess at what it is:

192.168.2.7 = IP address of a router to the rest of the world
10.0.2.x = Internal network

Ok... here is the problem:

You have given the client's the IP address of the router as their router... however, it is NOT on their network.

This is what you need to do:

Change the default gateway settings on the client's machines to the IP address 10.0.2.7 (and add the 198.168.2.1 address as the default gateway on the server).

So... this is how the routing works. I am on a client machine, and I want to talk to the world. I send my packet to my Default gateway (the server). The server then routes it from itself (on the 10.x.x.x network) to that network card's default gateway (the NIC on the 192.168.x.x network). It then goes from that NIC to that NIC's default gateway, 192.168.2.7, and out to the world.

I hope this helps

------------------
Reuel Miller
Windows NT Moderator (yes, that does make me biased )

[email protected]

Website: www.xperts.co.za/reuel/multiboot

Every morning is the dawn of a new error...
 

Read other 2 answers
RELEVANCY SCORE 65.2

Have a dell Inspiron laptop with a Intel Centrino wirelss -N2230 adaptor, with windows 8.1 OS. The ping test fails and I cannot get a wireless internet connection (Ping Test - Failed - No Response from Default Gateway/DHCP Server) is the error. Other devices work fine using this network. Have tried turning off firewall, resetting wireless adapter, completely removing virus software, did a system restore, nothing is working. I keep getting the yellow triangle
"limited" which of course means no connection. Icon in the task bar blinks 3 bars with yellow triangle, 4 bars with yellow triangle, no bars. It blinks from not connected to connected to limited. Everything has been working fine for the last six months. Can anyone help with this?

Windows IP Configuration
Host Name . . . . . . . . . . . . : Business1
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

Ethernet adapter Bluetooth Network Connection 2:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Bluetooth Device (Personal Area Network) #2
Physical Address. . . . . . . . . : 84-A6-C8-B4-62-56
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes

Ethernet adapter Ethernet 2:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Eas... Read more

A:Ping Test - Failed - No Response from Default Gateway/DHCP Server

Hello, the ping test is entirely useless if you are not actually connected to the network Please describe your issue in more details, including any messages or errors that you receive when you try to connect to your wireless router; what kind of wireless security is on the router, what make and model, if you are able to connect any other computers or devices to it...you get the point.
Regards
The Cleaver
 

Read other 2 answers
RELEVANCY SCORE 65.2

Hello, I am having a somewhat bizarre, extremely frustrating issue. I can connect to the internet via wireless just fine, and everything will be hunky-dory for a while. After a while, however (this varies anywhere from a day to a week), there will be a small hiccup on the connection, and then something fails in the Acquiring Network Address stage. My computers will get an IP, but they will not get the default gateway or DNS server.

I say computers because this happens on both my PC and laptop. This issue does NOT, however, occur for anyone else in the household.

I have tried a plethora of fixes, from simple computer reboots to fiddling with all sorts of settings, and nothing works to reestablish the connection. My father has also tried fixing it, to no avail. I have to go and reset my router, which also interrupts TV service, because it is through AT&T U-Verse. Needless to say, this does not make other people in the household very happy, and I really shouldn't have to be resetting my router every couple of days like that.

My PC uses a Netgear WG111v3 adapter and is Windows XP. My laptop has on-board Wifi and is Windows XP Professional. I am not sure why I am the only person in the household that experiences this issue. Could certain programs like AIM be causing problems?

Any help would be greatly appreciated, thanks.
 

A:Wireless connection briefly drops, then will not grant default gateway or DNS server

Nobody?
 

Read other 2 answers
RELEVANCY SCORE 64.8

Hi,
Is it possible to install Windows server 2012 Hyper-v on windows 8 Hyper-v? or should I use Wmware Workstation.

Thanks

A:Virtualize for test Win2012 Hyper-v server on Windows 8 Hyper-v?

You can't run hyper-v (any version) inside a VM so neither would work,
and even if you could it would be so painfully slow as to be unusable.
 
 
Bob Comer - Microsoft MVP Virtual Machine

Read other 14 answers
RELEVANCY SCORE 63.6

Hey,

Before continuing, this is a thread that I currently have going, if you want extra details on what's been going on. I'll try to explain it quickly here:

My laptop won't connect to wireless Internet. Doesn't matter where I am, so it's not a router problem.
I've tried many things (can be seen on the other thread), and still can't get wireless Internet connection.

Before I go any further, I'm not great with computers, so any instructions, please, eaassyyy!

Now the weird thing is, when I'm in Safe Mode with networking, Internet seems to be working fine!
As you can see in the title, my Ping test is showing something is wrong.

I have no idea what to do here. I've been going through forums, tried the following:

- Changing wireless channel
- TCP/IP stack repair options
- Calling Dell (what a joke that was...)
- ran an ipconfig /all (see on the other thread through my forum link)
- removed Mcafee (using Windows Essentials), and when I did that, Internet worked for 5-10mins then crashed again.
- checked the Mac filtering settings on my router settings

Also, my computer crashed the other day (got a blue screen, shut itself down). I posted the details in the thread.

Finally, my great friend the moderator Etaf asked me to post this to see if I have a problem that this forum could help me with ... I read the 1st post, here is the mentioned information (I couldn't do #3 because I run on 64-bit):

Hijiack This (when I ran i... Read more

A:Wireless Internet not working / Ping Test: No Response: Default Gateway, DHCP Server

I forgot to put the link to my thread on the other forum:

http://forums.techguy.org/windows-7/1041714-ping-test-no-response-default.html#post8263476

Results for the other test (also see attached for the 2nd file) :

DDS:

.
DDS (Ver_2011-08-26.01) - NTFSAMD64
Internet Explorer: 8.0.7601.17514 BrowserJavaVersion: 1.6.0_29
Run by Pierre at 22:18:43 on 2012-02-20
Microsoft Windows 7 Home Premium 6.1.7601.1.1252.2.1033.18.6038.4227 [GMT -5:00]
.
AV: Microsoft Security Essentials *Enabled/Updated* {108DAC43-C256-20B7-BB05-914135DA5160}
SP: Microsoft Security Essentials *Enabled/Updated* {ABEC4DA7-E46C-2F39-81B5-AA334E5D1BDD}
SP: Windows Defender *Disabled/Outdated* {D68DDC3A-831F-4fae-9E44-DA132C1ACF46}
.
============== Running Processes ===============
.
C:\Windows\system32\wininit.exe
C:\Windows\system32\lsm.exe
C:\Windows\system32\svchost.exe -k DcomLaunch
C:\Windows\system32\svchost.exe -k RPCSS
c:\Program Files\Microsoft Security Client\Antimalware\MsMpEng.exe
C:\Windows\System32\svchost.exe -k LocalServiceNetworkRestricted
C:\Windows\System32\svchost.exe -k LocalSystemNetworkRestricted
C:\Windows\system32\svchost.exe -k netsvcs
C:\Windows\system32\svchost.exe -k LocalService
C:\Windows\system32\svchost.exe -k NetworkService
C:\Windows\system32\WLANExt.exe
C:\Windows\system32\conhost.exe
C:\Windows\System32\spoolsv.exe
C:\Windows\system32\svchost.exe -k LocalServiceNoNetwork
C:\Program Files (x86)\Common Files\Adobe\ARM\1.0\armsvc.exe
C:\Program Files\Realtek\Audio\HDA\AER... Read more

Read other 3 answers
RELEVANCY SCORE 63.2

So I have been able to use my pc fine until the internet loses connection, so I troubleshoot and It says: The default gateway is not available, I had this error a few days ago and managed to fix it by setting my ip to obtain automatically, I tried this again and now I just get the error: "Ethernet doesn't have a valid Ip configuration. All the other pcs connected to the ethernet work fine and the wifi works fine so what is the problem?

Read other answers
RELEVANCY SCORE 61.6

Hi all,

I installed Vista Ultimate 64 bit yesterday and have today managed to get my Netgear DG834G wireless router working with the Netgear WG111v2 USB adaptor.

The problem is that everytime I restart the computer, I get an installation window appear once I start Vista asking if the Netgear is a trusted app.. Once I click yes it almost starts to install it again before finding the wireless network...

Does anyone have any ideas how I can set Vista to be happy with the USB adaptor and not keep asking about it, so that I can pick up the wireless network automatically when I start up (which I hate to say, is how XP used to work!)...

Thanks.

Read other answers
RELEVANCY SCORE 61.2

I have Hyper-v running on Dell Precision T3600 with Windows 8 OS.  I am trying to start a VM (called Windows8VM) to install Windows 8 in the hyper-v virtual machine, but I keep getting the following message:
"Windows8VM" failed to start.
Failed to start the virtual machine "Windows8VM" because one of the Hyper-V components is not running.
"Windows8VM" failed to start.  (Virtual machine ID D670D3BB-9AE2-0453D-9191-EA6EFC242A9C)
The Virtual Machine Management Services failed to start the virtual machine "Windows8VM" because one of the Hyper-V components is not running.
I have turned the hyper-v feature on in the "Turn Windows feature on or off.  The BIOS has virtualization enable.  Help!!! driving me nuts for a week now.
Nick :(

A:Windows 8 Hyper-V - Virtual Machine Management Service failed to start the virtual machine

Finally got it to work.  Our admin lock down the devices that could be installed on the computer.  It turned out that one of the vm devices was not allowed to be installed.  Thank community.
nick

Read other 11 answers
RELEVANCY SCORE 60

Hi,
I have been having problems with internet in new flat for some time!
It connects to the wireless box and has full signal but an exclamation mark is present
I have run some tests and the IPv4 and IPv6 say they have no internet access
I also run a full test and everything passed except the ping test which failed and it said:
no response:default gateway
response: dhcp server

it suggested disabling security firewall but i'm not sure if that's the correct thing to do or even how to do that!
Any help would be much appreciated
Many thanks
Amy
 

A:Ping test failed - response: DHCP server but no response: default gateway

Read other 9 answers
RELEVANCY SCORE 58

Hi. I'm using a 2012 r2 server hyper-v. Home network. Have internet access. Physical NIC.

I created a 2008 server vm. Not a DC. Just a plain 2008 r2 server in a workgroup.
I created an external switch, allowing management OS to share network adapter.
In the virtual machine settings, Network adapter is set to use this external switch.

I want the 2008 server vm to be able to connect to the internet to apply windows updates.
It is unclear to me what I need to do make this happen.

I believe the issue is in the ip configuration but I need some help.

Thanks in advanced
bzserverguy
 

Read other answers
RELEVANCY SCORE 58

Hi
I am working with windows 8 and I have installed SQL server 2007 and visual studio 2010. Now I want to upgrade these setups to SQL server 2012 and visual studio 2012. what is the advantages of what i want to do and how can i do it easily without corrupting the operating system? Please help.

A:Installation of sql server 2012 and visual studio 2012

SQL Server has an upgrade option that is pretty painless. Just run the setup file from your 2012 installation media and click the upgrade option. It will ask you what instance to upgrade, run some checks, and then upgrade it for you.

Visual Studio is a little different. If you install 2012 without uninstalling 2010 first, you will simply just have both versions to choose from. You can completely uninstall 2010 before installing 2012 by finding your 2010 installation file and adding the uninstall and force switches when running it(ex. "C:\vs_ultimate.exe /uninstall /force").

If you keep 2010, 2012 will ask you if you wish to import your settings and whatnot from 2010. If you uninstall 2010, 2012 will just have it all when you open it for the first time.

Read other 1 answers