Over 1 million tech questions and answers.

Windows 10 Connection failure error 561

Q: Windows 10 Connection failure error 561

I can connect to unsecure network but not to secure network. get Connection failure error 561

Read other answers
Preferred Solution: Windows 10 Connection failure error 561

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)


I have seagate hdd with windows 7 ultimate installed on partition C and the partition D for data.

Suddenly while booting, windows ask me for disk checking volume/partition D for consistency. If i let it check, the utility will run for endless time stucking at 6% mark . If i cancel the disk check, windows will take long time to load further to logon page and finally boots. But windows explorer wont show any properties for volume D (total space , used space etc). When clicked on D: icon, explorer will take a long time and finally will say DISK IS NOT FORMATTED..do you want to format it now ?

Disk management will show the volume as RAW
I checked the disk with minitools partition magic, and the volume shows NTFS and OK. I can also explore the volume and find all the files present on D drive. (not visible from windows)

CHKDSK with diff keys (/r / f etc) run from windows boot cd and the result is same..scanning wont go past 6-7% (File Record Segment xxxxxxxx Unreadable )
Any chance to make the volume accessible in windows again without loosing data ? !

A:CRC Error..HDD failure or Windows failure?

The first thing I would do is copy the data off the partition using linux, if you don't already have a backup. I would also take a system image. Then you can figure out if the drive is usable.

Read other 6 answers

I was connected to a VPN, using the Windows XP Pro in built VPN client, when I experienced a power cut. Since then I cannot connect to any VPN connection using the Windows VPN client. So far, this is the only feature
that does not work after the power cut. The internet is working and I can browse the local network no problem. 3rd Party VPN software such as Hamachi, Cisco Anyconnect, Check Point and App Gate are still working as normal.
I receive the error 721 on all VPN connections I have that use the Windows Client, but I know using another computer the credentials are confirmed as correct and have not changed.
I have performed the following:
On the Network adapter in Network Connections I ran the Repair option, this did not work.
I ran the following commands:

ipconfig /flushdnsipconfig /registerdnsipconfig /releaseipconfig /renewnetsh winsock resetRestarted the computer.
These did not work
I have changed the physical network adapter and MAC address. This has not worked
I have run WinSock XP fix (an old goldie tool) but this did not work
I have recreated one of the VPN connections but this did not work
I have disabled the Windows Firewall, this did not work

Are there any useful logging tools for the Windows client that I could use, or does anyone have any ideas as to what I can try next. Thank you

Read other answers


I am running windows 2000 workstation. I collect email from outlook express but occasionally while browsing offline, the dial up connection tries to connect to the internet.

If I cancel this action, the dial up connection stops working and will not respond until the PC has been rebooted.

Any ideas?

A:windows 2000 dial up connection failure


Is this if there is an email coming thru, and it connects to retrieve it? If not, lets have a look at the startup programs.

Go to Run and type MSINFO32
On the left choose Software Enviroment, then Startup Programs.

Actions | Save As Text File, and copy/paste the contents here.



Read other 3 answers

Please save my sanity

We have two windows 2000 workstations. One is connected to the internet through a dial-up connection (which is working fine), the other networked to the first via a switch.

Internet Connection Sharing worked for a while then gave up the ghost. I have followed instructions from microsoft and just about any other source going but cannot get it to work again.

I have followed all the info on settings, both pc's have working ethernet cards, can communicate with each other, have dhcp etc. Is there something i'm missing here? I don't need a shortcut to microsofts knowledge base, just correct instructions on how to get ICS working again.

It can't be so difficult, did it at home on 2 win 98 boxes no problem, but have been plugging away at this for ages and its getting embarrasing explaining to the boss.


A:windows 2000 internet connection sharing failure

Hello. This might work for you. Go to the network property window where at the top you have your Ethernet type and at the bottom you have check boxes for different things. Now UNCHECK the TCP/IP check box and say ok. Restart your machine, go back to the same window and CHECK the TCP/IP and say ok to it. Do that to your client machine and see if it works. If it still doesn't work do it to your host machine. Let me know if that works. Good luck to you. LS

Read other 2 answers

I am an ex-pat Englishman living in Cyprus.
I am using a Fujitsu-Siemens Amilo on Vista 32-bit.
I recently downloaded a programme reputed to provide me with a UK ISP ident so I could access various UK programmes. I understand there is a similar facility for US citizens abroad.
The programme I downloaded was ineffective. I uninstalled it.
Since then my 3G connection will not connect (Error 720 A connection to the remote computer could not be established. You might need to change the network setting for this,)
In my innocence I tried System Restore. The message received was (System Restore does not appear to be functioning correctly on this system. Incompatible version of the serialising pattern.)
An online advisory dite advised uninstalling and re-install the 3G driver. I did.
I have since had notices that the driver was not installed correctly and two advices that it has been installed correctly.
I am now receiving Error Code 680 - No dialling tone.
Any assistance that anyone could give to this 70 year old re-cycled teenager would be most gratefully received - particularly if offered in very simple language!!

Read other answers

I have Hp Pavillian, Windows 7 Home Premium Edition, 64bit system.
Everytime Windows downloads Windows updates, it is successfull downloading and installing, however, I then get a message saying: Failure configuring Windows Updates, Reverting Changes, Do Not turn off your computer.

I have gotten Windows Fixit for Windows Updates and installed....but that does not clear up the problem.
I have not wanted to use Restore feature of Windows 7, since I have installed many critical programs that I use.
Is there any other solution out in Cyberspace that will help resolve the "Failure Configuring Windows Updats".
Thank you

A:Update to Windows Error: Failure to configuring Windows Updates

Read other 7 answers

My friend just called me and his computer would n't boot so I went to look at it and don't know what is wrong. I am at home again I told him I would try to find something out so he doesn't have to do a clean install.

His computer has been working great, he downloads a few things it has been working good. Now, He has these sims games. He said that the sims game he was playing told him he need a different video driver and it was 15.oo so he clicked on no and continue. well he told me that everytime he played the sims game it would eventully go to a black screen and he said crash the computer, (I don't no exactly what he meant by crash the computer I think he meant a blue screen but I don't know he ifs around an hard to understand him. anyway he said he had played it 10 or 12 times and it did that everytime. He said he was playing it last night and it did that so he shut the computer down. He said when he got up today and went to turn the computer on it wouldn't boot up.

IT goes through where it reconizes the hareddrives and cdrom etc but right before it would go to the windows screen it just won't go any farther. It says at the bottom of the screen its the black screen and says boot from cd rom failure and won't go any farther.I booted it with his system cd and did a repair but it still goes to that screen and no farther,.

I don't want to and he doesn't want to do a clean install is there anyway to get to a command prompt to ... Read more

A:Windows XP Pro-error-boot from cd rom failure can someone help?

Read other 8 answers

Occasionally I get this pop up error message on my laptop screen. It shows up in the mornings after the system has been idle overnight; I do not normally turn off my laptop.

Each time this happens, I do a bootup CHKDSK /R. This takes several hours but does not find any errors to fix. I do check my Wininit file afterwards. It is a 1TB HGST HDD, the model number is shown in the picture. Op sys is Windows 7 Pro. It happens maybe two or three time a month. I have been collecting differential images on an external 2 TB Seagate drive, and have a spare empty identical HGST HDD available just in case the HDD does crash and burn. I also back up my data onto a networked desktop.

Other than a possible HDD error or failure, is there anything else that could cause the error message to pop up? Also are there any other events in event viewer that I should look at?

Peter B.

Read other answers

As I try to boot my laptop (a different computer than the one on which I have a malware thread ongoing) - IBM Thinkpad T41, I get the message: ERROR - 0200: Failure Fixed Disk: 1. Press F1 to setup, which brings up the IBM bios setup screen - with which I do not know what to do.

While I do have the backup of my user files, I do not have boot/recovery disk, I think. Am searching for something like that...

Any help would be appreciated.

A:Solved: Failure to boot: Error 0200 Failure Fixed Disk 1

Read other 14 answers

Hi guys,

I have had this problem ever since SP1 was available and never was able to install it. The idea of doing a clean install doesn't interest me so I have avoided SP1 till now. But now the new AMD catalyst drivers require SP1 and was wondering if this problem was ever solved.

I remember when Windows 7 Service Pack 1 was released, there was a problem with registry cleaning and stuff like driver cleaners because of which couldn't install SP1. I tried a lot of solution like replacing missing files etc but didn't work then.

So I tried now but am still not able to install it. During the update process on startup it stops around 10% and fails.

I have run SFC /SCANNOW(no integrity violations) and the cbs log is attached.

I ran the Update readiness tool and the checksur log is clean.

I ran the MGADiag as well and have attached its output.

Heres the old thread way back in April 2011.

A:Windows 7 SP1 install failure, error 80070002

Ok. I tried the standalone SP1 install package but it failed the same way and gave error 800f0826.

"Windows Update error 800f0826 is displayed when an update for Windows has failed to install and is preventing you from installing additional updates. Error 800f0826 does not identify the update that has caused the problem. The update that has caused the problem will display a different error."

I am guessing it will probably lead to the earlier error 80070002.

I looked in to the CBS.log and have trimmed it to just show the complete log from start of installation till failure. Have zipped it since its quite huge text file. I just don't know what to look for.

Read other 9 answers

I've tried all the obvious stuff and nothing works. SFC reports no integrity issues with the OS.

I'm wondering if the original problem was trying to update using Windows Update first. I was able to install IE 10 on my HP laptop running Windows 7 Professional x64 by running the stand alone installer. I did have the updated video driver so I didn't run into the package update install problem even though it has a hybrid video system.


DeWitt Payne

A:IE 10 update failure Windows 7 error 9C59

This seems to me to be a prime error...

2013-03-29 16:02:45, Info CBS Exec: Resolving Package: Package_1_for_KB2722913~31bf3856ad364e35~amd64~~, Update: 2722913-1_neutral_LDR, PinDeployment: amd64_e1fc75669929c04a713c50a1abffa6a2_31bf3856ad364e35_9.4.8112.20554_none_567fab582b0bb90e
2013-03-29 16:02:45, Error CSI [email protected]/3/29:20:02:45.975 (F) d:\win7sp1_gdr\base\wcp\componentstore\csd_locking.cpp(324): Error STATUS_SXS_ASSEMBLY_MISSING originated in function CCSDirectTransaction::LockComponent expression: (null)
2013-03-29 16:02:46, Error CSI 00000094 (F) STATUS_SXS_ASSEMBLY_MISSING #329457# from CCSDirectTransaction::OperateEnding at index 0 of 1 operations, disposition 2[gle=0xd015000c]
2013-03-29 16:02:46, Error CSI 00000095 (F) HRESULT_FROM_WIN32(ERROR_SXS_ASSEMBLY_MISSING) #329342# from Windows::ServicingAPI::CCSITransaction::ICSITransaction_PinDeployment(Flags = 0, a = e1fc75669929c04a713c50a1abffa6a2, Version = 9.4.8112.20554, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral, cb = (null), s = (null), rid = [77]"Package_1_for_KB2722913~31bf3856ad364e35~amd64~~", rah = [1]"3", manpath = (null), catpath = (null), ed = 0, disp = 0)[gle=0x80073701]
2013-03-29 16:02:46, Info ... Read more

Read other 9 answers

Hello all

Im using W7 x86.
I installed win7 x86 onto my another machine newly.Then I installed necessary important updates manually from Windows update (system and security\windows update) (default selection is : Install updates automatically ( recommended )
Now, my machine cannot start.It gives following error when machine starting up : "Failure configuring windows updates"
After this error machine restart automatically but it doesnt start again.

I pressed F8 button while machine booting up and selected "last known good configuration" and machine start successfully.

Also If I select "never check for updates" option from windows updates machine can start normally.

What is your opinion for fix that problem?

Thank you

A:Failure configuring windows update error

I would do a repair install
Repair Install

Backup your data first (just in case)...hopefully this will fix the corrupt files going array in Windows Update

Read other 3 answers


I've come across a Windows 7 Professional SP1 x86 system which attempts to install

KB3108664 daily, and fails daily with error 0x80073712. It has been doing this for weeks and weeks.

Please note: All other Windows updates both before and since are updating successfully. Only KB3108664 is failing.

What I have tried already:

sfc /scannow - cleanSystem Update Readiness ToolWindows 7 Update Troubleshooter - several times
All run successfully.

But KB3108664, and only KB3108664, continues to fail every time with error 0x80073712, both when run through Windows Update, and also when downloaded and installed manually.

I looked at LOGS\CheckSUR.log, and something is definitely wrong with this update. But I do not know how to interpret what I am looking at or what to do next.

If you need any further info, please let me know.

Thanks in advance for your help.


CheckSUR.log follows:

Checking System Update Readiness.
Binary Version 6.1.7601.22471
Package Version 26.0
2017-01-04 10:22

Checking Windows Servicing Packages

Checking Package Manifests and Catalogs
(f)    CBS MUM Corrupt    0x800F0900    servicing\Packages\Package_2_for_KB3108664~31bf3856ad364e35~x86~~        Line 1:

(f)    CBS Catalog Corrupt    0x800B0100    servicing\Packages\Package_2_for_KB310... Read more

Read other answers

To explain what happened: I have installed windows 7 then the upgrade to windows 10 on this computer.

I installed win 7 originally on an ATA HDD in IDE. It repeatedly gave me the error:
"Boot disk failure insert system disk and press enter"

It did not matter what DVD I used out of the 2 windows 7 ones I had. When it rebooted as part of the install it always came back to that error.

I tried fixing the boot in recovery.
I tried formatting the partition and installing again.
I tried deleting the partion and installing again.
Nothing worked.

I got a new HDD. SATA. I am now using this to boot from, with the other drive as second data drive.

I have now been able to install from the windows 7 dvd and the upgrade to windows 10.

This works, except some times I still get the error on boot:
"Boot disk failure insert system disk and press enter"

Additionally if the system is idle it sometimes freezes after 15 minutes to 4 hours, the screen freezes, the keyboard, the lights are still flashing, but leaving it for hours makes no difference it just has to be hard reset.

System specs:
Win 10 home 64 bit
4gb ram
Gigabyte P55M-UD2 board
Geforce GTS 250
Samsung 160gb sata
hitatchi 320gb ata

Thank you for any help you can give!

Read other answers

Hello every one,
I have been pointed here by vista64x forum they said that you guys are the professional.

Windows Update failure 80070490 (Windows encountered an unknown error) (as attached)
Attached also is the CBS.zip of my PC.

Thanks and much appreciated,

A:Error 80070490 Windows Update Failure

You appear to have a severe problem.

The summary from your CheckSUR report reads

Seconds executed: 1590
Found 3623 errors
CBS Registry Error Total count: 1
CBS Watchlist Package Missing Total count: 3582
CBS Watchlist Component Missing Total count: 40
Customer Experience report successfully uploaded. Thank you for participating. For more information, see the Microsoft Customer Experience Improvement Program on the Microsoft web site.
The problem appears to be in the registry - so the easiest fix is going to be a System Restore back to before the problem started, since the number of errors makes manual repair unlikely.

Do you know when the problem started?
When was the last Windows Update installed? - ignore MSE or Windows Defender updates

Read other 5 answers

I have been trying for long time to get windows update but always got
error 80072EE2. I have try anything I come across but no result. Computer I am
using is company computer and we work at sea. Satellite connection is good and no
problem with downloads or file transfer. Try disable firewall antivirus etc no avail.
English is my second language so sorry for grammar.
Can anybody help me please.
Regards Borys

A:Windows update Failure error 80072EE2

This error code is almost always due to connections problems rather than software problems.
One thing that is critical is your regional/location/date/time settings - if they are off-whack then WU will refuse connection.

Please check that, then run the following two test routines and post the results.

1) Blue Screen of Death (BSOD) Posting Instructions

2) Please follow the Windows Update Posting Instructions and post the requested data
If the file is too large (8MB compressed), remove the older CBSPersist cab files until the final file is below the limit - you can always post them separately after zipping them. (the forum doesn't allow the upload of bare CAB files, for a number of reasons)

Read other 4 answers

My Windows 7 began updating automatically to Windows 10 unsolicited. I confess I panicked and when the escape or cancel download failed I turned the computer off. I know, not the brightest bulb on the tree, but when I turned the computer back on it began
sending messages that I might be the victim of cyber ??? due to the fact I was running a non genuine Windows 7 program.
The Windows 10 has now installed on my computer but I am getting the following message when I try to activate the Windows 10:
Windows is not activated as your previous version of Windows on this device was not activated prior to upgrade to Windows 10.  Error code: 0x803F7001

Any help would be greatly appreciated!   THANK YOU!

Read other answers

Guys, i recently bought an asus ultrabook (zen x32vd), with win 7 home pro already installed (legal)
Following a friend's suggestion, i upgraded it to win 8 pro (speciall offer at 15 bucks).
I couldn't do a fresh install as the win 7 came with the ultrabook.
I really regret the upgrade. I did it last night i haven't been able to use it since then!
First, some intel drivers (for wireless display, bluetooth and usb) needed to be reinstalled, but the program from intel web failed to install it! (it freezes almost at the end, same problem when installing office and other programs).
Second, avast antivirus is not live protecting me anymore, don't know what the issue is.
Last but not least, i tried updating windows, but when it restarts i got the message "failure to configure updates, reverting" and it keeps restarting and restarting and restarting....
any help?
i would be so gratefull!
pd please apologize me for my grammar and spelling as english is not may mother language.

Read other answers

I have been trying to get Windows Update to work for the past few days, with no luck. It seems to have started to go wrong after a series of updates were installed on 21st May.

I am attaching part of the WindowsUpdate.log file, which includes the last successful update and the first unsuccessful attempt.

I have tried absolutely everything that has been suggested on the net. MrFixit, System Update Readiness tool, deleting the SoftwareDistribution files, winsock reset, clearing DNS cache, virus scan, disk check, SFC scan, and really everything I could find. I also tried uninstalling the Windows (but not Office) updates which were installed on 15th May. Loads and loads of reboots. Nothing seems to work! I now note that another Windows 7 on the same internal network, which is only rarely connected to the external internet, seems to have suffered a similar fate, but a Windows 8 machine is quite fine.

A:Windows Update Failure (error 80072EE2)

Your CheckSUR log is clear - but your SFC scan shows the following problems.

Line 14540: 2014-05-29 21:25:01, Info CSI 000003dd [SR] Repairing 5 components
Line 14541: 2014-05-29 21:25:01, Info CSI 000003de [SR] Beginning Verify and Repair transaction
Line 14544: 2014-05-29 21:25:01, Info CSI 000003e0 [SR] Cannot repair member file [l:36{18}]"powershell_ise.exe" of Microsoft-Windows-GPowerShell-Exe, Version = 6.1.7600.16385, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
Line 14547: 2014-05-29 21:25:01, Info CSI 000003e2 [SR] Cannot repair member file [l:50{25}]"TS_UnusedDesktopIcons.ps1" of Microsoft-Windows-MaintenanceDiagnostic, Version = 6.1.7600.16385, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
Line 14550: 2014-05-29 21:25:01, Info CSI 000003e4 [SR] Cannot repair member file [l:44{22}]"TS_BrokenShortcuts.ps1" of Microsoft-Windows-MaintenanceDiagnostic, Version = 6.1.7600.16385, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, Type... Read more

Read other 9 answers

Tech Support Guy System Info Utility version
OS Version: Microsoft Windows 7 Professional, Service Pack 1, 32 bit
Processor: Intel(R) Pentium(R) CPU G645 @ 2.90GHz, x64 Family 6 Model 42 Stepping 7
Processor Count: 2
RAM: 2012 Mb
Graphics Card: NVIDIA GeForce GT 220, 1024 Mb
Hard Drives: C: Total - 152524 MB, Free - 85327 MB; N: Total - 305242 MB, Free - 179964 MB;
Motherboard: ECS, H61H2-M12
Antivirus: Microsoft Security Essentials, Updated and Enabled

Good day
Suddenly not able to do successful backups in Windows 7. "W7 backup did not complete successfully
System cannot find file specified." Error 0x80070002.
What and where is the file specified?

A:Windows 7 Backup failure Error 0x80070002

Read other 10 answers

I keep getting this failure when I try to run Windows Update on this machine.
I booted into Safe Mode and tried running sfc /scannow which results in:
   Windows Resource Protection could not perform the requested operation.
I then copied CBS.log which has this info on the latest run:
2016-02-24 19:28:29, Info                  CBS    Starting TrustedInstaller initialization.
2016-02-24 19:28:30, Info                  CBS    Loaded Servicing Stack v6.1.7601.18766 with Core: C:\Windows\winsxs\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.18766_none_675144b3de10d6f7\cbscore.dll
2016-02-24 19:28:31, Info                  CSI    [email protected]/2/25:00:28:31.074 WcpInitialize (wcp.dll version called (stack @0x7fefb65f0dd @0x7fefb9998b5 @0x7fefb9634e3 @0xff8be97c @0xff8bd799 @0xff8bdb2f)
2016-02-24 19:28:31, Info                  CSI    [email protected]/2/25:00:28:31.261 WcpInitialize (wcp.dll version called (stack @0x7fefb65f0dd @0x7fefb9e6816 @0x7fefb9b2b18 @0x7fefb9635b9 @0xff8be97c @0xff8bd799)
2016-02-24 19:28:31, Info                  CSI    [email protected]/2/25:00:28:31.308 WcpInitialize (wcp.dll version called (stack @0x7fefb65f... Read more

A:Windows 7 Update Failure error 80070002

Why are you running sfc /scannow in Safe Mode?
Please download and run the Windows Update Troubleshooter.
Post the results in your topic.
Clicking on the link above will start the download automatically.

Read other 27 answers

Hello There,

I just installed Windows 7 build 7100 the other day.

I am getting an error on my computer once or twice a day where the system completely slows down and then reports "Insufficient Resources to complete requested service". This message pops up when trying to do anything, task manager, documents, my computer, even shutdown. I have to hit the reset button.

Second problem - I thought downloading the most recent windows updates might solve the issue, but everytime I try to run Update, it says "Windows could not search for new updates, code 8024402F. When looking up that code it indicates that the update service may be overloaded, but I have tried at 9 different times of the day so far.......

Any solutions?


A:Resource Error and Windows Update Failure

Kindly fill out your system specs, found in your profile. It's much easier for us to help if we know what you're working with.

Read other 9 answers

I'm trying to fix my sister's laptop which was obviously infected with a ton of stuff. First, I ran SuperAntiSpyware; it found and deleted 81 threats. Then I ran MBAM and it found 9-10 threats. I ran HJTthis a few times and it found and fixed 5-6 threats. Finally, I ran SpybotSD from a thumb drive and it found a couple things. I also installed Windows Essentials. Symptoms:- on bootup, sometimes it tries to check the disk, then cancels itself- Windows Help and Support starts as soon as the desktop shows. When I click the X, it closes and immediately pops back up.- IE doesn't work at all.- I installed Firefox. It worked fine at first, then randomly started redirecting me when I tried to click results on Google- I tried to run spybot installer to install the program on the computer, but it failed when it started unpacking.- I tried to run Windows update but it would start to download, then fail- when I tried to run Gmer as directed in your instructions, it caused the following: + message that said taskmgr.exe was corrupt, please run chkdsk + message that said gmer.exe was corrupt, please run chkdsk + logonscreensaver stopped responding, and screen went whiteDDS (Ver_10-03-17.01) - NTFSx86 Run by Owner at 16:18:17.62 on Fri 05/28/2010Internet Explorer: 7.0.6000.17037Microsoft? Windows Vista? Home Premium 6.0.6000.0.1252.1.1033.18.1013.264 [GMT -4:00]AV: Microsoft Security Essentials *On-access scanning enabled* (Updated) {BCF43643-A118-4432-AEDE-D861F... Read more

A:Windows Help and Support won't turn off/random browser redirects/Spybot SD installation failure/Windows Update failure

Please close this post as the problem is now fixed. I appreciate the service your forum provides. Thanks.

Read other 2 answers

I have been having some trouble with Windows update recently. My CheckSUR.log file says I'm missing 146 CSI Payload Files

I've attached both CBS and CheckSUR log files. Thanks for any help offered!

A:Windows update failure - error code 80073712

Here's the summary from your CheckSUR.log file...

Seconds executed: 889
Found 146 errors
CSI Payload File Missing Total count: 146
This tome indicates that something serious interfered at the crucial time of an update install where the files were being relocated after a reboot - especially as SFC appears to find nothing amiss.

I'll post a fix protocol for the above errors later - but I wouldn't hold out too much hope of its being effective.

Read other 9 answers

I can not for the life of me get SP1 to install. It always gives me the 80070002 error.

I've done what the microsoft help says to do which is clear out my updates list after stopping windows update in services then starting them again but it just produces the same error code.

I've run the system update readiness tool as well as a sfc /scannow and heres the CBS zip, a zip containing all the cbspersists(so I get them both uploaded under the limit) and a screenshot of the error.

This is starting to affect my ability to play newer games giving me 3B bluescreen errors and the like.

Thank you so much in advance for any help you can provide me! -Tera

Attachment 333648

Attachment 333646

Attachment 333647

A:Windows 7 SP1 failure to install, error code 80070002

Consider following the steps mentioned in the below MSFT Knowledge Base article:

Error 0x800B0100 when you try to install Windows Updates or Microsoft Updates

Navigate to the solution available for Windows 7.

Let us know if it helps you.

Read other 4 answers

After a reset of my laptop, Windows isn't activating.   I'm getting the error 0xC004C003: The activation server determined the specified product key has been blocked.  I talked to Microsoft support; the first person dircted me to activate Windows by phone (which didn't work), and the second told me to contact the maker of my laptop (HP).  Judging by other forum posts regarding this subject, HP needs to give me a new Windows product key.   Any and all help would be appreciated - I'm hyped for Windows 10 and I don't want that unactivated when I upgrade.

A:Windows 8 Activation Failure - Error Code 0xC004C003

Hi Please find the link given below might help ou to fix your issue. https://support.microsoft.com/en-us/kb/978305

Read other 4 answers

When I start Windows 7 about 30 seconds after the login, I see an error message popping up that says: "Failed to initial environment". In the task bar I see the an icon that writes MFC, which is the program that gives the error message. I looked in my task manager under processes if I see MFC, but there is nothing like this. I am using Windows 7 64 bit.

Does anyone have an idea what that would be?

Here are 3 screen shots, which show the error and all processes running in my task manager.

View image: Capture[img]http://s17.**************/udsf7f67f/Capture.jpg[/img]

View image: Capture2

View image: Capture3

A:Windows 7 Startup Error Failure To Initial Environment (MFC)

It could be something related to this
Microsoft Foundation Class Library - Wikipedia, the free encyclopedia
Download: Visual C++ 2008 Feature Pack - Microsoft Download Center - Download Details

Go to your msconfig (Go to start - search box - type "msconfig") and click on the startup tab and see if there's any program related to this and uncheck it.

Read other 2 answers

Windows 7 BACKUP AND RESTORE FAILURE with error codes 0x81000037 and 0x80080005.

Could you please have a look to the following screenshots together with the <JUNCTION> results in order to advice how can I TO SOLVE Windows 7 BACKUP AND RESTORE FAILURE
1. http://www.sevenforums.com/attachments/backup-restore/269840d1369591874-windows-7-backup-restore-failure-error-codes-2zyzozk.jpg.png

2. http://www.sevenforums.com/attachmen...1&d=1369591874

3. FILE NOT FOUND: http://www.sevenforums.com/attachmen...1&d=1369591874


Volume in drive C is OS_Install
Volume Serial Number is 0E4C-9673

Directory of c:\Users\msi

30/01/2012 09:27 AM <JUNCTION> Application Data [C:\Users\msi\AppData\Roaming]
30/01/2012 09:27 AM <JUNCTION> Cookies [C:\Users\msi\AppData\Roaming\Microsoft\Windows\Cookies]
30/01/2012 09:27 AM <JUNCTION> Local Settings [C:\Users\msi\AppData\Local]
30/01/2012 09:27 AM <JUNCTION> My Documents [C:\Users\msi\Documents]
30/01/2012 09:27 AM <JUNCTION> NetHood [C:\Users\msi\AppData\Roaming\Microsoft\Windows\Network Shortcuts]
30/01/2012 09:27 AM <JUNCTION> PrintHood [C:\Users\msi\AppData\Roaming\Microsoft\Windows\Printer Shortcuts]
30/01/2012 09:27 AM <JUNCTION> Recent [C:\Users\msi\AppData\Roaming\Microsoft\Windows\Recent]
30/01/2012 09:27 AM <JUNCTION> SendTo [C:\Users\msi\AppData\... Read more

A:Windows 7 BACKUP AND RESTORE FAILURE with error codes

Something is "broken" in your installation of Windows. Without knowing the full particulars of your installation, and exactly the steps you took to get to where the errors occurred, it's doubtful you can get backup working unless somebody here with expertise in Windows backup spends some time with you tracking everything down. If possible, reinstall Windows, using common procedures and disk configurations. Another option is to use a different backup tool.
Free Macrium is one, and there are others here that people recommend. It may seem "right and proper" to get Windows backup working correctly, but unless you're a "technical" who just won't give up, it's really unnecessary.
Other backup tools are simply better working and less prone to failure. I'm a "technical" but wouldn't waste time with Windows shadow copy service problems unless it was part of my job. Unless you are compelled to use Windows shadow copy services by some specific need, it's much simpler to use other software for backups and images.
I never learned about Windows shadow copy services, so I can't help you with that.
Maybe one of the people here who swear by Windows backup will help you clear up your problem.
That would be nice.

Read other 2 answers

Every time I try to install 9 windows updates I receive multiple errors and they all seem to lead to corrupt manifest files. One of the updates includes Windows 7 SP1.
The errors I receive are:
Code 80073712
Code 800B0100
Code 80246007

I ran sfc /scannow and it found no problems.
I tried a system restore that did not resolve the issue.
I then ran the update readyness tool and the following result was logged:

Unavailable repair files:
winsxs\manifests\x86_microsoft-windows-ie-ieproxy_31bf3856ad364e35_8.0.7601.17638_... Read more

A:Windows Update Failure with Multiple Error Codes

Hello, and welcome to the Seven Forums!

Well, hopefully we can avoid a complete reinstall, because I do have a few tricks up my sleeve

Can you please upload for me an unmodified copy of C:\Windows\Logs\CBS\CheckSUR.persist.log, and I shall see what I can do.

Also, ideally, please avoid chopping up log files, because although I can read them, to save time when sourcing hundreds of files at once, I have many automated tools to do repetitive portions of the work for me, and truncated logs confuse these tools. But I already have a pretty good idea with what is going on with your computer, and well done for running the System Update Readiness Tool.

Thanks a lot!


Read other 1 answers

cumulative security update for internet explorer 11 for windows 7 for x64-based systems
is the error I get when I try to install it, I've tried fix it, system readiness tool, registry fixers, registry reset, and still I get it, but I've done a lot of research and the only conclusion I can come up with is I have corrupted something I don't know. Please don't answer if your going to give me a link for "Checking" updates error 8007002. This is only happening to this specific update.

A:Failure Configuring windows updates, Reverting changes Error

Ok when I restart my computer to configure updates, it goes up to 90% and then says that. But it reboots again and tries to configure a second time but still says failure, it does this 3 times and then I can log in. I think it may have something to do with the error (on my other thread) I have on a update and its affecting this, but I don't know what the problem is. If you see the picture, imagine seeing that one time and it reboots and says that 2 more times. That's what's happening to me.

Read other 2 answers

I've been asked to have a look at an Acer laptop running vista 32 bit that refuses to allow windows updates. They fail upon installation.

I ran ms fixit and that didn't solve the problem so I ran checksur.

The log is below. Can anyone help? Thanks.
Checking System Update Readiness.
Binary Version 6.0.6002.22574
Package Version 17.0
2013-02-20 11:21
(f) CheckSUR Registry Failure 0x00000005 Unable to delete CBS registry tag.

Checking Windows Servicing Packages

Checking Package Manifests and Catalogs
(f) CBS MUM Corrupt 0x800F080D servicing\Packages\Package_7_for_KB2789646~31bf3856ad364e35~x86~~ Line 1:
(f) CBS Catalog Corrupt 0x800B0100 servicing\Packages\Package_for_KB2789646~31bf3856ad364e35~x86~~

Checking Package Watchlist

Checking Component Watchlist

Checking Packages

Checking Component Store
(f) CSI Manifest Missing 0x00000002 msil_system.design.resources_b03f5f7f11d50a3a_6.0.6002.23000_en-us_2a720f1818a6d008.manifest msil_system.design.resources_b03f5f7f11d50a3a_6.0.6002.23000_en-us_2a720f1818a6d008
(f) CSI Catalog Corrupt 0x800B0003 winsxs\Catalogs\92c8c3b9d2c22b56de070d7bdec77c36265003c489ef354966e6d3137d44c515.cat eb48defbded..173923dec3a_b03f5f7f11d50a3a_6.0.6002.18752_c568685d45d82a72
(fix) CSI Catalog Corrupt CSI File Replaced File: 92c8c3b9d2c22b56de070d7bdec77c36265003c489ef354966e6d3137d44c515.cat From: C:\W... Read more

A:windows update installation failure (error 8007010b)

You could try installing or reinstalling Windows Installer 4.5. or you could try running the Microsoft system readiness tool (I don't know the difference between it and checksur)- Use System Update Readiness tool to fix package corruption errors.

Read other 15 answers

system loading very slow for that I did the system extensive test that time I got failure I'd error message likefailure I'd: plx43h-80m8gh-xd7wmf-60wl03product I'd : p3c92pa#acjhard disk 1test was stopped at the hard drive test. laptop warranty left only 3 days. I bought this notebook last year only and I have not used much. less storages in drive no application were installed in laptop, I used only internet purposes. why this problem got hard drive failure I'd error for less usage also I don't know. I stayed in out of country. how can I get the support from hp to resolve this issue.can anyone please suggest me to resolve this problem.advance thank you for your response.

Read other answers

I recently switched back to a pc after owning a mac for a couple years and I noticed after 3 weeks of owning it that it had never asked me to install any updates, so i went into windows update and it says it has never been updated. So i click search for updates and it gives me Errors found:Code 800F0900. I have used a registry cleaner (CCleaner), ive installed the system update readiness tool (Feb. 2013 x64), and I've run the microsoft fix it tool. absolutely nothing works. any help is appreciated!
specs are:
Alienware M14X R2
Intel i7 3630QM
16GB memory
750 HDD+ 32GB SSD (the OS is installed on the HDD)

A:ERROR CODE 800F0900 windows update failure

Are you getting that error for every updates or when installing a specific update ? . Before trying any repair attempts,  uninstall your antivirus software and see if it helps. You can re install it later. 
If that didn't solve the issue, please follow the below steps.
1 ) Make sure Date, time and region settings are correct.
     Make sure your WIndows 7 is SP1 installed. If not download and run the SP1 offline setup.
2 )If all areOK download 'Windows Repair ALL in One' from  http://www.tweaking.com/content/page/windows_repair_all_in_one.html
3) Install and open the tool. Click next to continue. Go to Step 3 and click on the Do it button to run System File Check.
4 ) Go to Step 4 and click on the Create button under System Restore.

5 ) Go to Start Repairs and click on the Start button.

6 ) If it asks permission to backup registry, allow it to do so. Now you will see the main screen.
Click 'Unselect All' to remove default selection. Now select the following items.
 Register system files
 Set Windows services to default start up
 Repair windows Update
 Repair Windows Firewall
Now click the start button and repair will start. It may take sometime to finish. If it asks for permission to restart, allow it to d... Read more

Read other 16 answers

Windows Update Failure - Error Code 80073712 . tried everything under the sky. forusm say abotu deleting the pending.xml file , but there is no such file under winsxs folder (windows\winsxs) . The os is VIsta X64 and if we go into windows update screen we see that all teh updates have failed to install. When we try to download the Windows Update Manager for vista x64 while copyign files it gives the same error code. We have even tried running sfc /scannow , it takes some time , completes the verification (100 %) and says that it found corrupt files but failed to reolve the issue. Please suggest..

Just to update we have also tried the following fix :

regsvr32 wuapi.dll
regsvr32 wuaueng.dll
regsvr32 wuaueng1.dll
regsvr32 wucltui.dll
regsvr32 wups.dll
regsvr32 wups2.dll
regsvr32 wuweb.dll

still no joy...
Sorry to keep on updating the post .... we have norton internet security on the system. we have not tried disabling the firewall before attempting to register the above files. however , we received no error messages while registering the files. we got confirmation after every file registration that the dll file has been registered successfully

A:Windows Update Failure - Error Code 80073712

I think there is no more step left in the course book .. hence no replies... no worries , i am making our friend run a factory image restore on the hard drive. Windows Mail as always gave me some hiccups while exporting the messages as it came up with an error which said that the external HDD where i was saving the file , was running out of space (Genius!!! , the external HDD has 195 GB of free space and the file we were copying is 296 MB ) or the messages are corrupt. I then had to turn off the UAC, copy the actual Windows Mail folder at a differet location on the HDD and change the file attributes and finally it got copied on the external drive manually(Microsoft should have had reasons to release Widnwos 7).... neways i thank all the viewers for passing by the post and pray to God that i resolve the issue as early as possible.

Read other 10 answers

OK....so lately i have been getting error messages as soon as i sign on XP and right after the error message comes up, my sound card gets all messed up. Here are the error messages.after those error messages come up, my sounds gets messed up.(see below picture)any ideas? HiJack This log is available upon request. So is any other information needed to solve this problem.Thanks,TRBMan(to see the original post as well as other's previous advice {that failed to help} go to this forumTech Guy Forums)

A:Windows Error Message Followed By Sound Card Failure

Do you know exactly when this problem began?

Do you have a separate sound card or is it an onboard audio adapter, and have you tried updating the drivers for it?

Read other 3 answers


I am trying to Install Monthly Security Rollup Update in our Organization thru SCCM 2012 and i got this error "Failed to install Updates "Catastrophic failure" 0X8000FFFF

So I tried Manually installing the Sercurity Rollup kb4034679 in one of the PC and it failed to install the update and i found the following error in the eventviewer

Event id 3 

Windows update "Security Update for Windows (KB4034664)" could not be installed because of error 2147549183 "Catastrophic failure" (Command line: ""C:\Windows\system32\wusa.exe" "C:\Windows7SecUpdates\Windows6.1-kb4034664-x86_Aug_2017.msu"

The solution i tried is to uninstall the previous security update which we installed in May 2017(KB4012215) and then to installing the Aug Security Patch worked.

Now i need a solution on how to push this Security update kb4034679 to entire PC's in our Organization without uninstalling the old update. 

Is there is any solution for above error.

D. Sendil Kumar

Read other answers

I've exhausted my ability to try to solve this one on my own. I've run all of the automated fixes I can find from Microsoft, so I'm asking for some more targeted help.

I'm running Windows 7 Pro x64 SP1. I have run the System Update Readiness Tool (May '14). It completes successfully, but I don't know what it actually accomplishes because it doesn't make things better as far as I can tell.

Here is my windows update screenshot:
Attachment 330898

Here is what I see when I try to run SFC:
Attachment 330899

Here's my CBS zip file:
Attachment 330900

Thanks in advance for the help. Let me know if there is more info you guys need from me.

A:Windows Update Failure, Error Code 80070002

Hi, Welcome to SF.

Try this,

Windows Update error 80070002 - Windows Help

Read other 9 answers

Hi..I just bought a refurbished computer. Its an HP Desktop Computer COMPAQ 6005 PRO Phenom II X3 3.0 GHz 4 GB 250 GB HDD Windows 7 Professional 64-Bit .

In order to install windows for the first time on this refurbished machine, I have to choose "system restore" at boot.
It starts to go through the process of installing windows, then I get this message : "Windows Restore Critical Failure. This can be caused by a missing Windows image".
Anyone know how I can fix this. I cant get into windows, because I first have to install it using the system restore. So the only computer access I have, is when it boots up.

I have tried to contact Newegg...which is where I bought it, but no luck. All repairs and service is through the warranty company...cant get in touch with them either.

Any advice is appreciated!


Read other answers

When i try installing Kernel-Mode Driver Framework version 1.11 update for Windows 7 it always fails and gives me an error 8007007e and i honestly dont know what to do. I've been googling aroudn the internet and everything either didn't work or didn't make sense to me and i'm not a tech geek or even near that, so i really need some help.

i am unable to upload my cbs.zip aswell because it exceeds the max mb.

Update for Kernel-Mode Driver Framework version 1.11 for Windows 7 for x64-based Systems (KB2685811)

Installation date: ‎25/‎03/‎2013 7:40 PM

Installation status: Failed

Error details: Code 8007007E

Update type: Recommended

Install this update to resolve issues in Windows. For a complete listing of the issues that are included in this update, see the associated Microsoft Knowledge Base article for more information. After you install this item, you may have to restart your computer.2685811

A:Windows update failure error code 8007007e

SFC /SCANNOW Command - System File Checker option two. Any integrity errors?
Open the Windows Update troubleshooter

What is the System Update Readiness Tool?
Post file %SYSTEMROOT%\Logs\CBS\CheckSUR.log afterwards

Read other 8 answers

ok...I was on facebook yesterday just like any other day and my computer restarted then a blue error screen came up...said error detected windows shut down if never seen this just reboot. well i did that and then it came on again. It said BAD POOL HEADER.. i restarted it again then just said problem detected window shut down. I tried system reboot back to 2 days it let me one for like 10 minutes then did it all over again. 2nd time said Memory Management. Everytime i try to reboot or run a test it just goes back to blue screen I cant even go on the computer to get on the interent to troubleshoot so im at work on the interent can someone please help me It is a HPw2007 desktop i bought it in 2007 Windows Vista

A:Windows Startup Failure/Blue Error Screen

Can u ppl please help me

Read other 1 answers

Hi everyone,

I am using Windows 7. I tried installing ubuntu with the option " Include Ubuntu along with window partition".

While installing ubuntu, error occurred. Now unable to boot Windows also. It prompts for recovery cd.

I am not having recovery disk.

Tried using other machine's recovery cd - Diskpart. But got the following error while selecting a partition.

virtual disk service error:
this operation is not allowed on an invalid disk. The disk may be invalid beacuse it is corrupted or failing, or it may be invalid because it is offline.

Required your help to recover windows without affecting the existing data.


A:Error in booting Windows after Ubuntu installation failure

Try a Startup Repair:
Startup Repair
Note: You may need to do startup repair 3 to 4 times.
Startup Repair - Run 3 Separate Times

We always assume you have made your Recovery Disks using the OEM manufacturer's Recovery Media Creator app the first day you had your new PC.
& made the Startup Repair CD.
startup repair disc-create

Did you make the OEM manufacturer's Recovery Disks?

Read other 2 answers

I keep getting the wonderful "video TDR failure nvlddmkm.sys error while using my PC with Windows 10 Home edition. No matter what I'm doing or even if the PC is idle and neglected, the error message pops up right after the black screen and then the
PC boots. I do have an NVIDIA GeForce 8400GS graphics card. From Google and MSN I understood the problem was with the card drivers. As of today all updates have been loaded. The error continues. I'm willing to buy a different card if that is what it takes. 
My PC is used for business and it has to work or I don't. From other site posts I have been advised to copy a dmp file which I've done. Now I just don't know what to do next to get help.
What is the next step or a solution?
JC in Georgia

Read other answers

Everytime I turn on my computer and it asks me to select what windows to load (vista, 7 (I Don't have dual boot set up though??) and I do Windows 7, it does not Boot and gives me the winload.exe error message in my title. I have read alot here but been unable to fixc the problem, maybe hard disk? Help would be great.

I have a M3A32-MDP, AMD Phenom II quad840, two maxstore 300gb hard disk set up for RAID1

A:Windows 7, winload.exe error:0x00000e9, Boot failure

Please read through this thread: Windows 7, winload 0x00000e9 I/O error . You will get a list of diagnostic tests you could try to see if the hard drive is recoverable. For that OP the replacing the hard drive was his solution.

The first things to try is to run CHKDSK /R from a command prompt in Windows. Then run a hard drive diagnostic program - one downloaded from the hard drive manufacturer that boots from a CD - to test the drive.

You want to determine whether the hard drive is bad or the W7 installation is bad.

Read other 1 answers

This error keeps popping up
It will say whatever file im trying to access at the top ie: C:\Documents and Settings\Windows XP\My Documents\My Music is not accessible.
Then below it says
Logon Failure: account currently disabled
I need to get on my computer and i don't know whats wrong!!
Please help Thanks!

edit: Well I was looking at the reinstalling xp site and i tried doing what it told me to do but I was blocked. Now im on my regular computer and I am on Safe Mode. I got the hijackthis downloaded and here it is
Logfile of HijackThis v1.99.1
Scan saved at 4:27:57 PM, on 12/17/2006
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)

Running processes:
C:\Program Files\Internet Explorer\iexplore.exe
C:\Program Files\Hijackthis\HijackThis.exe

R1 - HKCU\Software\Microsoft\Internet Connection Wizard,ShellNext = http://www.techguy.org/
R0 - HKCU\Software\Microsoft\Internet Explorer\Toolbar,LinksFolderName =
O3 - Toolbar: &VSAdd-in - {74DD705D-6834-439C-A735-A6DBE2677452} - C:\Program Files\VSAdd-in\VSAdd-in.dll
O4 - HKLM\..\Run: [Realtime Monitor] C:\PROGRA~1\CA\ETRUST~1\realmon.exe -s
O4 - HKLM\..\Run: [!ewido] "C:\Program Files\ewido anti-spyware 4.0\ewido.exe" /minimized
O4 - HKLM\..\Run: [NvCplDaemon] R... Read more

A:Error 1331 on Windows Xp (Logon failure: account currently disabled)

Read other 8 answers


I'm using Win 7 x64
I've got a problem with KB2937610 for over a month.
I've tried to install it manually, use MSFixit and install it from clean boot. Neither worked.
Recently I found this forum, so here I am to ask for help.
(I'm sorry if I made any grammar mistakes, my English isn't prefect).

A:Windows Update KB2937610 failure; error code 800B0100

You have some missing OS files as well - but here's the summary from the CheckSUR log...

Unavailable repair files:
I'll post a fix protocol when I can get to it - probably tomorrow.

Then we'll need to fix the other errors.

Checking Component Store
(f) CSI Payload File Missing 0x00000000 system.data.sqlxml.resources.dll msil_system.data.sqlxml.resources_b77a5c561934e089_6.1.7601.17514_pl-pl_fab1504c7d13b602
(f) CSI Payload File Missing 0x00000000 system.data.sqlxml.resources.dll msil_system.data.sqlxml.resources_b77a5c561934e089_6.1.7601.18156_pl-pl_fab5265a7d104a83
(f) CSI Payload File Missing 0x00000000 system.data.sqlxml.resources.dll msil_system.data.sqlxml.resources_b77a5c561934e089_6.1.7601.22326_pl-pl_e3e47e9896ba5ed5
(amongst other possible ones - more later)

Read other 7 answers