Over 1 million tech questions and answers.

Server 2012 r2 Internet Explorer Internet settings

Q: Server 2012 r2 Internet Explorer Internet settings

I'm running server 2012 and in internet explorer the internet security is set to high. I need to change this setting to Med to allow some sites to load. I also cant install Net frame works. Can some one help..

Eric Klotz

Read other answers
RELEVANCY SCORE 200
Preferred Solution: Server 2012 r2 Internet Explorer Internet settings

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

RELEVANCY SCORE 105.2

Red Shield - IE Enhanced Security Configuration for Administrators
Amber Shield - IE Enhanced Security Configuration for Non-Administrators
Green Shield - IE Zones
When I click on the how to correct this it takes me to a Windows 2003 page not 2012 for the first issue

And page does not exist for the second issue ?
Any ideas ?

Read other answers
RELEVANCY SCORE 93.2

We run a web proxy server on our network for internet access.
On client machines (running Windows 2012 R2) I have configured the proxy server setting in Internet Explorer "Tools\Internet Settings\Connections\LAN Settings" to point at the designated web proxy server.
When attempting to browse websites from IE I receive the "The proxy server isn't responding" error.
Conversely, browsing the same sites via Google Chrome and Firefox (installed on the same client server) return web pages without error.
In addition, if I run Internet Explorer as administrator (Right Click\Run as Administrator), I am able to browse web sites without receiving the error.
It would appear that the issue is isolated to browsing via IE when not run in elevated mode.
Has anyone come across this issue?

A:Server 2012 R2 - Internet Explorer Proxy Server Issue

Hi Dicki,
First, please try to reset the Internet Explorer. Some plug-ins may affect the proxy.
If it doesn't work, please try to perform a network capture on the client.
Please check if the client send the http traffic to the proxy server at the correct port.
If the client has sent the http traffic to the proxy server, please check if there is any warning or error in the proxy server.
To download Network Monitor, please refer to the link below:
http://www.microsoft.com/en-us/download/details.aspx?id=4865
Best Regards.Steven Lee Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Read other 2 answers
RELEVANCY SCORE 91.6

Can I get Internet Explorer 11 for Windows Server 2012 ?
NO R2,
I want to use Internet Explorer 11 on Windows Server 2012.
Regards,
Yoshihiro Kawabata

A:Can I get Internet Explorer 11 for Windows Server 2012 ?

Hi,
 
As I known, Internet Explorer 11 is preinstalled with Windows 8.1 and Windows Server 2012 R2. No additional action is required.
 
If you plan to run IE 11 on Windows server 2012, it won?t be supported. Internet Explorer 11 is not available for download for on Windows Server 2012.
 
For more information, you may refer to:
 
Internet Explorer 11 - FAQ for IT Pros
 
http://technet.microsoft.com/library/dn268945.aspx
 
Hope it helps.
 
Regards,
 
Blair DengWe
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Read other 7 answers
RELEVANCY SCORE 90.4

I see posting that Explorer 11 would be available in May of 2019 for 2012 slandered and 8.0.  Is this true?

Read other answers
RELEVANCY SCORE 90.4

Hello
My Server, running 2012 R2 Standard, has to use Internet Explorer (Version 11 installed), to perform various browsing tasks on a regular basis. 
Both automated and manual browsing between URL's randomly stops working and displays nothing but a white page. The only way to fix it is to quit IE and reopen, which slows the process down massively. 
I have all addons disabled. I have tried resetting everything back to default. I have also disabled GPU rendering.
Any suggestions on what is going on? For reference, the exact same automation took place on Server 2008 R2 previously with no issues - I don't understand what could be the problem here but assume it is something Server 2012 related.
Thanks
Matthew

Read other answers
RELEVANCY SCORE 90.4

?Internet explorer? message in windows server 2012,

I?m wondering why the attached messages appear each time any software is launched in windows server 2012.


How to stop having these messages?

Thank you

Best

Jamal

A:“Internet explorer” message in windows server 2012,

Which other programs do these messages appear in,
Obviously this particular program relies on an Internet connection and accessing a database on the site which not many programs I know of do this ?
Your screen shots exclude your taskbar,
You might try holding down the Ctrl key when you click to open this program and see what effect it has,
Or right click it and click on Run as administrator when you open it.

Also see the links above my signature picture/ Fill in your system spec's sheet, add which security suite you use.

Read other 7 answers
RELEVANCY SCORE 90.4

confirm only that windows server 2012 64 bit support internet explorer 10 or not?

Read other answers
RELEVANCY SCORE 90.4

i have purchase "Windows Server 2012 R2 64-bit" OS but Internet explorer (IE) 10 is not available, Pre-installed IE11. Internet explorer 10 is available in "Windows Server 2012 64-bit". so i want install, Internet Explorer 10, Can Microsoft
change/Replace Product key for "Windows Server 2012 64-bit"? i have invoice, Original DVD and Product Key.

Read other answers
RELEVANCY SCORE 90.4

Hi Team,
Now currently running Internet Explorer 11,
how to unstall 11 and install 8.

Regards, Pradhap P

Read other answers
RELEVANCY SCORE 90.4

i have purchase windows server 2012 R2 Standard, it is showing Internet Explorer 11 but i want Internet explorer 10 for working, i want required Internet explorer 10, please support.

Read other answers
RELEVANCY SCORE 88.4

We have an important LOB application (QuickBooks 2018) that requires that requires Internet Explorer 11 for QB to operate correctly.  Unfortunately our server runs Windows Server 2012 Essentials as an operating system (not R2).  From reviewing
various Microsoft documents, I realize that IE 11 is not supported on Server 2012.  However, we need to be able to run QuickBooks, which requires that version of IE.  Upgrading the server OS to 2012 R2 would take hours, because there is no in-place
upgrade option.  We would have to reinstall and configure the OS again from scratch.
Is there anything we can do to resolve this problem?
Thanks for any assistance you can offer.


John

Read other answers
RELEVANCY SCORE 86

Hey,
recently Microsoft released an optional update to Internet explorer 11 on Server 2012 "R1". (Previously IE11 was installed)
I made the big mistake of installing it, now IE11 is crashing every day - usually with this errors:
Name of the failed application: Explorer.EXE, Version: 6.2.9200.16628, Timestamp: 0x51a94434
Name of the faulty module: twinui.dll, Version: 6.2.9200.22769, Timestamp: 0x5cd484c5
Exception code: 0x80270249
Error offset: 0x000000000037d52b
ID of the failed process: 0x41c8
Start time of the failed application: 0x01d56de546b7c940
Path of the failed application: C: \ Windows \ Explorer.EXE
Path of the failed module: C: \ Windows \ System32 \ twinui.dll
Report identifier: 4ad79613-d9e0-11e9-9504-44a84240e5ec
Full name of the failed package:
Application ID that is relative to the failed package:Name of the failed application: Explorer.EXE, Version: 6.2.9200.16628, Timestamp: 0x51a94434
Name of the faulty module: twinui.dll, Version: 6.2.9200.22769, Timestamp: 0x5cd484c5
Exception code: 0x80270249
Error offset: 0x000000000037d52b
ID of the failed process: 0x41c8
Start time of the failed application: 0x01d56de546b7c940
Path of the failed application: C: \ Windows \ Explorer.EXE
Path of the failed module: C: \ Windows \ System32 \ twinui.dll
Report identifier: 4ad79613-d9e0-11e9-9504-44a84240e5ec
Full name of the failed package:
Application ID that is relative to the failed package:
Or this:
Name of the failed application: ta... Read more

Read other answers
RELEVANCY SCORE 83.2

Hi everyone,
 
Here is my issue, my computer is functioning ok except for internet explorer. I am able to google and search things but when I try to enter a number of different sites (such as the malwarebytes download page) I receive a message that says "the proxy server isn't responding." "Check your proxy settings 127.0.0.1:8877." When I go into internet options --> Connections----> Lan Settings, the "user proxy server for your lan" is checked and greyed out. I have run malwarebytes which did not fix the issue. Someone mentioned checking a proxy setting in regedit which was set to 1, when I change it to 0 as I was recommended, It did not fix the issue and simply reverted to 1. Im not sure if that is relevant at all but this issue is quite frustrating and any help you could provide would be greatly appreciated.
 
Thanks!
 

A:Internet Explorer says "The Proxy Server Isn't responding" and settings locked

Hello,
Please follow the instructions in ==>This Guide<== starting at step 6. If you cannot complete a step, skip it and continue.
Once the proper logs are created, then post them in a reply to this topic by using the Add Reply button.
If you can produce at least some of the logs, then please create the post and explain what happens when you try to create the log(s) that you couldn't get. If you cannot produce any of the logs, then still post the reply and explain that you followed the Prep. Guide, were unable to create the logs, and describe what happens when you try to create the logs.

Read other 2 answers
RELEVANCY SCORE 78.4

Please refer photos.
I am using Internet Explorer 11 from Program Files folder which supposedly launches 64 bit applications. This Internet Explorer 11 settings from Tools Options of Custom Level and Advanced tabs Security features were if selected; Internet Explorer
11 64 bit simply refuses to load websites with host of other truly funny messages like US DOD official website found 'Not Secure' or Microsoft's own msftconnect.com 'This website is not secure' etc., with other websites like default Internet Explorer 11 webpage
doesn't loads fast enough even though all options favours fast loading with Advanced security features; WHY? this ultimately stops after all settings are set to default without single modification in Custom Settings or Advance Security features.
This coupled with Microsoft Edge's unpredictable website loading with frequent Network's internet connection disconnecting to the brink of unusability; nothing; even Microsoft Edge Reset won't resolve these scenarios.
And now Microsoft Edge DEV; with all above said problems and beta version errings uses 1.5 GB of 4G ISP full speed memory to send computer information to Microsoft within half day of 12 hrs. day, rest of day goes with crawling speed of ISP setted 64 Kbps
in short without internet connection; this happening on all days Microsoft Edge DEV use; now a days I use only Internet Explorer 11 64 bit strictly with Default Level & Advance Security features Resetted instead of selecting app... Read more

Read other answers
RELEVANCY SCORE 77.2

I am used Exists activity for the popup but not able to reach it and is throwing me.
Cannot communicate with internet explorer browser.

Plz help me for issues/alternatives.

Read other answers
RELEVANCY SCORE 75.6

Should I leave at default or should I tweak it?
I'm setting it up for a friend so what would be the best settings for novice users?
 

A:Best settings for GDATA internet security 2012?

When I last used it, left everything on default and it worked wonders for me. Don't know what other people will say though. :s
 

Read other 8 answers
RELEVANCY SCORE 74

Hello,"Internet Explorer is using a proxy server on this computer to connect to the Internet." Hitman Pro gives me that message when I do a scan, and is unable to repair the problem. I did all steps suggested at this link, as that person's problem was very similar to mine:http://www.bleepingcomputer.com/forums/topic335743.html ("internet proxy?"). None of the procedures and suggestions contained at that link have worked. Also, Symantec's "Norton Power Eraser" reports two problems: m2wshlex.dll (shell extension) and deaddiskdoctor (directory).I have now done the steps at this link:http://www.bleepingcomputer.com/forums/topic34773.html ("Preparation Guide For Use Before Using Malware Removal Tools and Requesting Help").I've pasted the DDS.txt file immediately after this, and attached the Attach.txt and Ark.txt files. Thank you very much for your assistance.DDS (Ver_10-03-17.01) - NTFSx86 Run by Administrator at 9:20:49.03 on Sun 08/29/2010Internet Explorer: 8.0.6001.18702 BrowserJavaVersion: 1.6.0_21Microsoft Windows XP Professional 5.1.2600.2.1252.1.1033.18.1023.288 [GMT -4:00]AV: avast! Antivirus *On-access scanning enabled* (Updated) {7591DB91-41F0-48A3-B128-1A293FD8233D}AV: ESET Smart Security 4.0 *On-access scanning disabled* (Outdated) {E5E70D32-0101-4F12-8FB0-D96ACA4F34C0}FW: Online Armor Firewall *enabled* {B797DAA0-7E2E-4711-8BB3-D12744F1922A}============== Running Processes ===============C:\W... Read more

A:Internet Explorer is using a proxy server on this computer to connect to the Internet

Hello dannya98, My name is Syler and I will be helping you to solve your malware issues. Sorry for the delayin replying, we are very busy at the moment.Please note because we are very busy, if I don't hear from you within 5 days the topic will be closed, If youhave since resolved your issues I would appreciate if you would let me no so I can close this topic.Please download Malwarebytes' Anti-Malware from HereNote: If you already have Malwarebytes' Anti-Malware, just update then run it.Double Click mbam-setup.exe to install the application.Make sure a checkmark is placed next to Update Malwarebytes' Anti-Malware and Launch Malwarebytes' Anti-Malware, then click Finish.If an update is found, it will download and install the latest version.Once the program has loaded, select "Perform Quick Scan", then click Scan (the scan may take some time to finish, so please be patient).When the scan is complete, click OK, then Show Results to view the results.Make sure that everything is checked, and click Remove Selected.When disinfection is completed, a log will open in Notepad and you may be prompted to Restart.(See Extra Note)The log is automatically saved by MBAM and can be viewed by clicking the Logs tab in MBAM.Copy and Paste the entire report in your next reply .Note: If MBAM encounters a file that is difficult to remove,you will be presented with 1 of 2 prompts, click OK to either and let MBAM proceed with the disinfection process,if asked to restart t... Read more

Read other 44 answers
RELEVANCY SCORE 74

Hi,

I am using windows server 2012 r2 standard. Need to open a specific application with IE 10.
would you please how install IE 10 and open it.

Thanks
Srinivas

Read other answers
RELEVANCY SCORE 71.6

hi
i have installed the windows 2012 in test lab, i was getting some errors for Internet exploere so I  uninstalled the same.

now I am need to install it and do some test... but not getting any option to install it ...

please help.
Regards Atul

A:windows 2012 - Install internet explorer 9 or 10

Hi,


Firstly, would you please let us know how did you uninstall Internet Explorer 10.


Meanwhile, we cannot install older version of Internet Explorer in Windows Server 2012 and there is no standalone installation package of Internet Explorer 10.


However, we can try the following command line to enable Internet Explorer 10:



dism /online /Enable-Feature /FeatureName:Internet-Explorer-Optional-amd64

Hope this helps.


Jeremy Wu
TechNet Community Support

Read other 5 answers
RELEVANCY SCORE 71.6

Windows Server 2012 R2

Domain Join User Not Able To Access Internet Need Solution.

Scenario.

Server Attach 2 Networks Card.
Private Network
IP: 10.0.0.10
Subnet: 255.0.0.0
Dns: 10.0.0.10

Public Network
IP: 192.168.15.14
Subnet: 255.255.255.0
Default Getway: 192.168.15.1
Internet Working On Domain Controller

Client User:
IP: 10.0.0.11
Subnet: 255.0.0.0
Dns: 10.0.0.10
Now I Want To Access Internet on Client User without Proxy Server
Kindly Guide Me Complete Procedure.
Guide You In Depth.
Server Attach Two 2 Network Card
1st Network Card Attach Internet Wire
Ip 192.168.15.14 Subnet:255.255.255.0 Default Getway: 192.168.15.1
2nd Network Card Configure Private Ip
Ip: 10.0.0.10 Subnet: 255.0.0.0 Dns:10.0.0.10

Now Private Network Card Wire Attach In Cisco Switch 2950
And One Wire From Cisco Switch 2590 Connect To Local User System
Client Ip 10.0.0.11 Subnet: 255.0.0.0 Dns: 10.0.0.10
Client System Join Domain Successfully
Now My Question Is I Want To Access Internet On Client PC Without Proxy Server.
Waiting For Good Reply...

Read other answers
RELEVANCY SCORE 70

Hello,
For every new user on Windows 2012 R2 remote desktop server the Internet Explorer shortcut icon in Start Menu opens Microsoft Edge browser.
I unpin it from Start Menu, search for "iexplore" and pin in to Start Menu and Taskbar. The icon on the Taskbar opens Internet Explorer, but the icon in Start Menu opens Edge again.
There are no group policies applied to the server.
How do I fix this?
Thanks for your help.

Read other answers
RELEVANCY SCORE 68.8

have been trying to syncronize my gmail in Windows essentials 2012.
I had for outgoing mail smtp.gmail.com, for incoming mail pop.gmail.com, checked the authentication box. I double checked my log on on gmail with user name and password. Yet I still get "can not connect to server"
I did check mark the imap box in the gmail account.

A:server settings for gmail in W.E's 2012

POP and SMPT change gmail to googlemail.com
465 and 995 are the ports

Read other 9 answers
RELEVANCY SCORE 68.4

this is my sisters hp laptop she got malware which made the internet explorer not access any networks but i deleted the maleware wid maleware bytes but still cannot connect to server its using a wireless connection to a bt home hub the connection is fine cos she can connect to ares lite (the p2p program) but not to any websites ive tryed winsock fix lpfix and iefix but all did not work ne help will be much appreciated thankx

A:internet explorer 6 cannot find server server or dns error

am i doing something wrong?

Read other 3 answers
RELEVANCY SCORE 67.6

Hello,

I have a strange issue. My computer was running fine. Then I took it to the main lobby and hooked up the internet through hard wire. It worked fine as I connected to the interent. When I went back into my office and connected to the internet I got page cannot be displayed. I cleaned out all the temporary internet stuff with ccleaner and did the clean registry, still nothing. A friend gave me hijackthis and I ran it and came up with some strange settings in proxy. So I went into interent options to try and change them, but they don't go away. I do apply, ok, and exit IE but they come right back. I used hijackthis to remove them and it worked. Unfortunately I had to do another presentation in the main lobby, same thing happened. I looked through the first steps and ran them all and can't find anything. I am running XP SP3 and have avg8 free running. I don't do any web surfing or downloading of software. Any help or ideas would be greatly appreciated.

Thanks,
Ghost

A:Internet Proxy Server Settings have bogus data

Hello, greyghostx
Welcome to TSF

My name is Billy O'Neal and I will be helping you. (Billy or Bill is fine, if you like.)
Please give me some time to look over your computer's log(s).
Please take note of the following:In the meantime, please refrain from making any changes to your computer.
Also, even if things appear to be running better, there is no guarantee that everything is finished. Please continue to check this forum post in order to ensure we get your system completely clean. We do not want to clean you part-way up, only to have the system re-infect itself. :)
If you do not understand any step(s) provided, please do not hesitate to ask before continuing. I would much rather clarify instructions or explain them differently than have something important broken.
Finally, please reply using the button in the lower left hand corner of your screen.
Old topics are closed after 3 days with no reply, and working topics are closed after 5 days. If for any reason you cannot complete instructions within that time, that's fine, just put a post here so that I know you're still here. We get a lot of people who simply leave, and if there is no contact for that amount of time I will have to assume you have "vanished" .

We need to create an OTViewIt ReportPlease download OTViewIt by OldTimer.
Save it to your desktop.
Double click on the icon on your desktop.
Click the "Scan All Users" checkbox.
Push the button.
Two reports will open, copy and paste t... Read more

Read other 2 answers
RELEVANCY SCORE 66.8

I'm apologizing now if I have this posted in the wrong place or haven't dug deep enough into the forums for an answer. Also I see that I have some extra stuff in the report because I tried to do the Windows Update but couldn't and forgot to run the clean up again. My problem is that every time I connect to the internet, through any program, I have these settings again. The proxy is enabled to use 127.0.0.1 with the port 5400. I have deleted them and unchecked the boxes and clicked OK but they always come back. They are in my registry too, only when I connect though. I'm afraid to do much in the registry without advice.This all started after I did a reinstall of Internet Explorer and was looking at the Internet Options>Connections>Settings>Proxy>Advanced just to see what was in there, which was nothing. I had to check the box for "Use a proxy..." to look and when I closed out a pop up screen asked me if I was sure I didn't want a proxy and I clicked yes. So fine, I unchecked "Use a proxy..." but then wanted to look at it again. I did all the same but this time a proxy suddenly appeared out of nowhere. I noticed that my web pages were coming up faster and so left it there but then began to get spam email from Canada the next morning and got worried about it. I can't get rid of it now. I can uncheck it everytime I connect but what a pain and is it really gone? What is it up to?I did all the prep work recommended by BC, which took several hours an... Read more

A:Trouble With Proxy Server And Port Settings In Internet Tools

Hi Everyone, I found out what was making my proxy and port default every time, finally. It was my new Web Accelerator from my ISP. That is how they are enabling a faster service. But in the meantime, since I followed your preparation instructions I was able to find the other stuff that most likely caused the not so nice spam emails. I had also installed a "new" program around the same time. In the Print Shop ProPublisher 2000 ver. 10 the BitDefender scan found a Backdoor. Ralpha.A and a Brodcast Dssagent. So I had (1) Trojan.Dloader.BUP, (2) Backdoor.Ralpha.A, (1) Generic.Adw.SaveNow.56AD4696 (leftover from a downloaded screensaver, I think), (1) Brodcast DSSAGENT and (2) Trojan.Dloader.AMA's altogether. The AMA's were sticky. The BitDefender could not get them out. After a few tries, I then downloaded the CounterSpy program (4 to 5 hours on dial-up ) and was able to remove them. A tip: Run your scans again until you get a clean scan. Don't assume that all was found and deleted on the first try. So I'm hoping that all is clean as a whistle ! I hope someone can give my new Hijack This report a look and see if it is OK. Keep in mind that after doing all that scanning and coming back clean I then uninstalled the bad Print Shop ProPublisher and did some other stuff before doing the report. I did the disk clean up and Eusing Registry Cleaner to try and make a clean report. Hope it is OK. I'm wondering if the two that I've marked in red can go? Thanks for your at... Read more

Read other 6 answers
RELEVANCY SCORE 66.8

I was having some problems with my internet connection (which have been resolved) but my friend came over and hastily set all of my Internet Explorer settings back to default to "solve the problem".

can someone lead me to the right direction to get the settings so that they give me the most security/safety/control? (like what should and shouldn't be checkmarked, etc) thanks in advance!

A:Internet Explorer Settings

As a whole, IE is a fairly secure environment. If wanted you can go into the security tab and set your internet setting to High instead of medium. The best thing to do is to ensure you have all your windows updates completed and ensure you have some type of Antivirus/Antispyware scanners to find anything that may be lurking on your computer already. Below is a list of my most used Antispyware programs. YOu can only have one Antivirus but you can have as many antispyware programs as your heart desires and you can never have to many.

Microsoft Anti-Spyware (for Win2000/WinXP only)
http://www.microsoft.com/downloads/d...n&Hash=654YDW6

Ad-aware SE Personal
http://www.download.com/Ad-Aware-SE-...ml?tag=lst-0-1

Spybot Search and Destroy
http://www.download.com/Spybot-Searc...ml?tag=lst-0-1

Read other 1 answers
RELEVANCY SCORE 66.8

I was in the standard buttons at the top of the IE screen and accidentally turned off the standard buttons themselves and now I can't figure out how to get them to appear again.
Hoprefully there is an easy if not obvious answer to this problem.

A:Internet Explorer Settings

I think you can find right tools to fix this from "Tools"

Read other 2 answers
RELEVANCY SCORE 66.8

Is there any way, i can save the setting of Internet Explorer? My PC has been set up for NTL Home Broadband! The installation disc wouldn’t run on my system, so I had to call them up and set it up over the phone! With them setting up IE with me assessing various pages on the NTL site, for my IE to recognize the broadband!! What I really want to do it maybe reinstall windows from scratch… deleted everything, clean the registry etc!!!! but id rather not have the £10 phone bill to call NTL again for them to set me up on broadband! So is there a way to save all these setting it a CDR or whatever, then put them setting on the newly formatted PC?
 

A:Internet Explorer settings?

Read other 6 answers
RELEVANCY SCORE 66.8

Hi, I use Internet Explorer 6 with SP2 and the toolbars jump between
the normal ones with file edit view fav tools help kind of thing to some really stupid
style where everything is hidden. How can I get it to stay on the regular toolbar page and not do that weird kind of page? I cant even describe it correctly but want just normal page. Dont see how to reset it to that style. Thanks

A:Internet Explorer settings

Click on VIEW - TOOLBARS, and select the ones you want

OR

Right-click anywhere on the toolbars, and add the ones you want or customize.

THEN

When its the way you like it, right-click anywhere on the toolbars and select "Lock the Toolbars".

Read other 6 answers
RELEVANCY SCORE 66.8

Hi,

I can't seem to modify the security settings for IE. Specifically I am trying to log in to my Yahoo e-mail account and I get a message saying "The browser you're using refuses to sign in (cookies rejected)". The privacy report says that, indeed, several versions of the yahoo web-site have cookies blocked even though right clicking on the sites clearly shows that "Always Accept cookies from this site" is selected. I can see nothing wrong with the cookie settings and have cleared caches, temp files etc as suggested by many other solutions out there. Internet search suggests that there should be a P3P entry in the registry but I can't see it anywhere. Where would these records be? I've run Ad-Aware and SpyBot with no improvement.

The PC is running Ranger, a schools based OS but I've removed it with no difference.

XP Windows Pro SP2, IE 6.

Any thoughts gratefully received.

Regards,

Paul.

A:Internet Explorer Settings

Have you tried moving Yahoo into your "trusted sites?"
Regards,
John

Read other 2 answers
RELEVANCY SCORE 66.8

I cannot paste the TSG SysInfo!
When I open Internet Explorer "This page cannot be displayed" or "Website doesn't appear to be valid" appears.
I also have problems with "LAN" settings. When using Google and going to a webpage I receive a message that No proxy server available or page cannot be displayed. I have changed the settings in Google settings and Internet Explorer but this message keeps returning. What can I do other than keep changing the settings?
 

A:Internet Explorer & LAN settings

1. Welcome to Tech Support Guy

2. You say when using Google - Google Chrome I presume, is that correct please

3. What anti virus and firewall are you using

4. Which settings have you changed please

5. Do you use a proxy server.
 

Read other 1 answers
RELEVANCY SCORE 66.8

Hiya all..Happy Holidays to everyone, I have a problem with my IE6, everytime I go to change my Internet Settings under Internet Options to make my security settings lower, I can change it, but then it reverts right back to original status. I havent had trouble getting into certain game sites before, but now I cant seem to get into them and also certain pages will not load correctly for me, I have also tried to add the sites I'm having problems with to my trusted zone sites and that doesn't work either. Can anyone tell me what I need to do to get these settings to stay where I want them to be??? Thanks for all your help.......Tam! Mod Edit: Closed tags. ~tg~

A:Internet Explorer Settings

I don't know the answer to your specific problem but I'd be very wary of adding Games Sites to your Trusted Zone - that's really leaving yourself open to attack from any malware running around on those sites (and there will be plenty). What anti-virus and anti-spyware protection are you running at the moment?You should check your system with some online scans:Online trojan scanner: http://www.windowsecurity.com/trojanscan/Here are some links to free online Anti-Virus scans. They do take some time to load and run and in some cases you can only use Internet Explorer, with ActiveX enabled, to access them but they are an excellent support for your existing anti-virus program. (Run at least two of them).Panda Active Scan online - http://www.pandasoftware.com/activescan/Internet Explorer only. Requires email address. Requires Active-X components to be installed. Approx 12MB download.BitDefender online scan - http://www.bitdefender.com/scan/licence.phpInternet Explorer only. Must agree to a EULA. Need to allow installation of an Active X component.Some of the options are not clearly explained.McAfee online scan - http://www.pcpitstop.com/freescan/Security Advisor (?) - http://www3.ca.com/securityadvisor/virusinfo/scan.aspxTrend Micro Housecall - http://uk.trendmicro-europe.com/enterprise...call_launch.php(European version, supports Netscape, Mozilla, Firefox and Opera)or http://housecall.antivirus.com/ (IE only)Kaspersky - http://www.kaspersky.com/scanforvirusLink to 'Online Scan' a... Read more

Read other 1 answers
RELEVANCY SCORE 66.8

Whats the best security settings for internet exporer ? also for trusted sites? please help
 

A:~Internet explorer settings~

Make sure your ActiveX controls are set as follows:

Go to Internet Options - Security - Internet, press 'default level', then OK.
Now press "Custom Level."

In the ActiveX section, set the first two options (Download signed and
unsigned ActiveX controls) to 'prompt', and 'Initialize and Script ActiveX
controls not marked as safe" to 'disable'.

Active X settings

http://www.compu-docs.com/activex.htm

http://www.alexandermagazine.com/babystep/lesson24explorer.htm
 

Read other 3 answers
RELEVANCY SCORE 66.8

Nevermind... I found out that you dont set your IP in Internet Explorer. You set it when you configure yout network card. Is there a file that saves the settings of your network card such as the ip it is broadcasted over a LAN at? The reason I am interested is because I am a currently a highschool student and in a computer tech class. My job is to try to find a way around the blocking software. I relized that if I set my card to broadcast across the LAN with an IP that is in the exeption list on the blocking software.

If you could help me out in finding the file that stores the NIC settings I would be very greatful.

Thanks,
Doomsday123
 

Read other answers
RELEVANCY SCORE 66.8

I am having problems with playing YOU TUBE videos. In my programs list under
the START menu there are 2 Internet Explorer programs ie Internet Explorer &
Internet Explorer (X64) . If I highlight the (x64) version and disable the POP UP
BLOCKER via the TOOLS button I can play a YOU TUBE video but only in the
one browsing session ie. as soon as I go back to open another session using
GOOGLE search YOU TUBE won't play.
Also I notice that I am getting a lot of frozen screens when browsing
with a message YOUR BROWSING SESSION HAS ENCOUNTERED PROBLEMS.
ARE these problems related? I was thinking of RESETTING INTERNET EXPLORER
but this sounds a bit dangerous.
ANY SUGGESTIONS PLEASE

A:Internet explorer settings

Ice, welcome to Sevenforums!

Reseting it is a good idea. It will ask if you want to keep personal settings. After, go to get.adobe.com/flashplayer and download flashplayer to your desktop. Uninstall adobe flashplayer from contol panel in favor of installing this newer version. Check add-ons in internet explorer and make sure all the ones you want are there and none other. Having IEx64 and normal IE is standard on a x64 system, which you have. They are 2 versions of the same browser, but have about the same speed (for IE9). I'd use the normal one due to compatability reasons. Hope this helps

Read other 1 answers
RELEVANCY SCORE 66.8

I have Internet Explorer 7 on my PC. The OS is XP Pro SP3After reconfiguring the internet security settings in Internet Explorer 7 I am unable to download an exe. file from Super Anti Spyware. A message is displayed stating "This download is blocked by your Security Zone Policy - superantispyware.com". I have tried altering different settings but I have not succeeded in overcoming the problem.The new configeration settings are described in the following link:Please referring this thread to configure Internet Explorer 7 properly. Could you please advise me which security setting I need to alter that will allow this exe file to download.Thank you for your in advance for any assistance. NONIC

Read other answers
RELEVANCY SCORE 66.4

I have Windows 7, search the internet with Chrome, seems my computer may be infected.  When I click chrome, sometimes it gives me my home page, sometimes it goes straight to the message "unable to connect to the proxy server", when it doesn't go directly to my home page correctly, it also states this exact message with an upside down face.  I did some research online and the Chrome message that people were posting up were a bit different from the one I am seeing. 
 
When I attempt to troubleshoot by going to the Chrome settings and going down to "Change Proxy settings" it prompts "access to this feature has been disabled by a restriction set by your system administrator", even though I am using the system administrator user, which is the only user on the system.  I've tried going in through the cmd line as well, pinged, netstat, tracert would give me results but weren't consistent.  I did a system restore as well, I had Sopho's anti-virus but it was out-of-date, for this was my work computer back in September but think the lease for it ended, so I installed AVG for now just today, most likely the reasoning for the computer being infected and causing this problem.  I have also started the pc in safe-mode, same results, is this a group policy issue?  I am unfamiliar with group policy and couldn't find it within my computer.  I do have the home premium version of 7 for what it's worth.
 
Please, please help, anyone!  I reall... Read more

Read other answers
RELEVANCY SCORE 66.4

Hello, I've done some searches in the forums and tried a few fixes posted for similar issues but had no luck. BackgroundI am running Windows 7 Ultimate 64bit. I recently installed some free software which of course came with some adware, changed my browser settings (home page, default search engines.) After some work I was able to remove them, but now have encountered a new problem which I expect is also malware related. ProblemWhen I direct my browsers to any website I get a message saying that there is no response from the proxy server. I have never used a proxy server for internet access and when I go into my Internet Properties>LAN Settings and un-check "Use a proxy Server for your LAN" and check "Automatically detect settings" the settings are not remembered and revert as soon as I close and re-open "LAN Settings" rendering my browsers useless. Things I've TriedScans withMalwarebytes antimalwareMicrosoft security essentialsSpybot Search and DestroyCCleaner (cleaner and registry)Using regedit to manually delete suspicious registry keysThe FRST fixlist hereThe OTL fix hereAny help you can offer if appreciated. I am accessing the internet via a netbook and have been installing scanners to the infected PC via flash drive.

A:Malware preventing change of proxy server settings/ internet access

Welcome aboard  Please follow the instructions in THIS GUIDE starting at Step 6. If you cannot complete a step, skip it and continue.Once the proper logs are created, then make a NEW TOPIC and post it HERE. Please include a description of your computer issues, what you have done to resolve them, and a link to this topic.If you can produce at least some of the logs, then please create the new topic and explain what happens when you try to create the log(s) that you couldn't get. If you cannot produce any of the logs, then still post the topic and explain that you followed the Prep. Guide, were unable to create the logs, and describe what happens when you try to create the logs.It would be helpful if you post a note here once you have completed the steps in the guide and have started your topic in malware removal. Good luck and be patient.If HelpBot replies to your topic, PLEASE follow Step One so it will report your topic to the team members.

Read other 3 answers
RELEVANCY SCORE 66

Hi Guys,

I resetted my IE 6 settings to their factory defaults for my Windows XP. Are there any settings that you think I should uncheck? What does the Enable Install on Demand do? Also, where are the Enable Active X Controls, that were a part of previous versions of Windows in IE? I do NOT WANT WINDOWS XP SERVICE PACK 2 on my system. What would you suggest? I am going to uncheck the Automatic Check for IE updates.

Jack
 

Read other answers
RELEVANCY SCORE 66

My internet explorer security setting have disappeared....can they be downloaded?? I cannot get on the internet (my laptop) without as it is giving the message "Your current secirity settings do not allow this file to be downloaded???". My button to restore default settings is greyed out and not available under internet option security settings.
 

Read other answers
RELEVANCY SCORE 66

I went on a vacation recently and came back to discover that my housesitter messed my computer up. I kept getting the warnings about my computer being infected with several viruses (malicious adware software), I can't remember exactly which one it was. I got rid of it, but then I could not get on the internet. I finally discovered a post about unchecking "Use a proxy server for your LAN", so I unchecked it and was able to access the internet. However, whenever I try to google anything, it takes me to different "search" websites instead of linking me directly to the site I want. Or, it will send me to a website that's trying to sell me something and I have to completely close IE down. This is getting really old, and I don't know how to fix it. If I recheck the proxy server box, I cannot get on the internet again. If anyone knows how to fix this, I would appreciate it. Thanks in advance!

A:Internet Explorer proxy settings

You are still infected. Click this link and follow the instructions to have a security analyst look at your system. NEW INSTRUCTIONS - Read This Before Posting For Malware Removal Help - Tech Support Forum

Read other 2 answers
RELEVANCY SCORE 66

I'm a newbie to Windows 7 Home Premium & think maybe I've messed up IE9. It seemed to me to be slow & some sites left me with hundreds of items in Temp.IE Files while others, this one in particular, just left 1, so in trying to get less from somewhere else I messed around with IE settings & now don't even remember what I did. So actually I guess my main question is: what is Microsoft Fixit? I've seen reference to it several times but have never used it. I have a very wide 'yellow streak' down my back & don't know which way to go.

Thank you.
oops, forgot to mention that the reason I came here to post was that I'd been in the Tutorials doing some reading when I was interrupted by a phone call & when I came back to continue, it took what seems like forever to 'wake up' my screen. Then when I came back here to edit, it again took too long to open my post. I'm sorry, my wording may be wrong, hope this makes sense.

A:Not sure of my internet explorer configuration/settings

Regarding IE9 setting changes:

IE has a lot of "Restore Default" options in the settings.
Try going back through the IE Options and setting everything back to "default".Internet Explorer - Reset
If your OS came with IE8, you should also be able to uninstall/re-install IE9...Internet Explorer 9 - Uninstall

Read other 1 answers
RELEVANCY SCORE 66

Recently, we ran a pilot where FIPS-compliance mode was enabled on Windows 7 Enterprise SP1 32-bit computers.  Specifically, the "System cryptography: Use FIPS-compliant algorithms for encryption, hashing, and signing" security option was
set to Enabled.  The pilot is over and we turned off FIPS-compliance mode.
Since doing that, I have noticed that the SSL/TLS settings in Internet Explorer 9 are disabled on computers that were part of the pilot.  I know the defaults are:

SSL 2.0 : offSSL 3.0 : onTLS 1.0 : onTLS 1.1 : offTLS 1.2 : off
Now, all of these settings are disabled (grayed out) and the following settings are set:

SSL 2.0 : onSSL 3.0 : onTLS 1.0 : onTLS 1.1 : offTLS 1.2 : off

This affects all user accounts on the system.
The test GPO we used to turn on FIPS mode for these computers has been verified to only be enforcing that FIPS setting.  It was not controlling any Internet Explorer settings.
Here is the troubleshooting I have done so far:

Reset Internet Explorer via the Reset button on the Advanced tab in Internet Options.Put computer in an OU that had Group Policy inheritance blocked, performed gpupdate, and rebooted to ensure no GPOs were affecting the computer.
Verified that local policy was not enforcing the Internet Explorer SSL/TLS settings.Ran msconfig, disabled non-Microsoft services, and rebooted.Removed the Internet Explorer feature, rebooted, re-added it, and rebooted.Installed all available important and r... Read more

A:Internet Explorer SSL/TLS settings disabled

If anyone else runs into this, I resolved my issue by modifying the SecureProtocols
value in the registry (since I avoid Group Policy at all costs) at
HKLM\SOFTWARE\Policies\Microsoft\Windows\CurrentVersion\Internet Settings.
The data to set the registry value to can be found at the link below (just Ctrl+F SecureProtocols).
http://msdn.microsoft.com/en-us/library/ee487835%28v=winembedded.60%29.aspx

Read other 6 answers
RELEVANCY SCORE 66

I've used several guides for tweaking Internet Explorer for security settings. I want to be as meticulous and tight with security as possible without having to compromise for easy surfing, particularly not having to answer a prompt for every page I visit.

I've tried to do the online spyware scans for TrendMicro, Symantec and several of the other ones every now and then and they either don't load at all or tell me I'm not running ActiveX or scripting, which I am. What settings could be making it difficult for me to use these?

Also are there any good guides for tweaking IE for tight security without compromising surfing smoothness and which have very detailed descriptions of the changes you could make? I've read this guide but it's not very detailed.
 

A:Internet Explorer settings and difficulties

Hi and welcome to TSG,
I do all my online activity with an additional level of security called a "sandbox" using a product from 'Sandboxie'

http://www.sandboxie.com/

It's free of ads etc, and I've not noticed any difference in speed when on the internet.

I'm not an expert on the tech reasons, but I understand that using 'Firefox' or 'Opera' as your browser is more secure. Perhaps others will explain why/how ...

http://www.mozilla.com/en-US/firefox/

http://www.opera.com/products/

I hope this is of help?
Richard.
 

Read other 3 answers
RELEVANCY SCORE 66

My issue is IE6 in W2K, how could I make all users or any new users for that matter, make there internet settings all the same. specifically the homepage, privacy websites. Any suggestions...
 

Read other answers