Over 1 million tech questions and answers.

Windows Installation Error # 1001

Q: Windows Installation Error # 1001

Hello BleepingComputer, I am having a difficult time tracking down the cause of the failure of a program to re-install. the program is Wikitup dictionary. Previously, I have had problems with this program in the form of it not starting correctly; it uninstalls only with
difficulty. The problem now, however, is different. I am now receiving the following error message: Error 1001-On/AfterInstall event
handler of wikilon.installerHelper-value cannot be null> Parameter name: xml. I thought that the problem may be with Windows installer but I have been able to install other programs without any problems. The announcement of "value cannot be null" seems as though something
was changed somewhere; if it was, it was not by me as I would not know a line of computer code if it was in front of me. I've tried a restore point, tried retrieving the app from my back-up, tried downloading it from other (third-party) sites all to no avail. This program
works very well when it works and I consider it one of the best at what it does so giving up on it is not worth considering. I have had to
perform a complete system restore (wipe) of my computer in times past, and when I re-installed this app it always operates properly; it's
only when I have had to un-install and re-install it that this problem occurs. It's as though the program leaves some sort of marker on
my machine after an un-install that gets in the way of it's re-installation. Note-I have thought of the possibility of a "stuck" register
fragment and I have used two different register cleaners but the problem persists. Please help me find the solution and thank you.

RELEVANCY SCORE 200
Preferred Solution: Windows Installation Error # 1001

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Windows Installation Error # 1001

If your problem is with an uninstalled program leaving remnants behind, I suggest you use Revo Uninstaller to completely uninstall it. A lot of us use it. It's very useful. It does what Add/Remove Programs won't do.


http://www.revouninstaller.com/

Read other 1 answers
RELEVANCY SCORE 68.4

So my fortnite freezes and crashes without a error code from UE4 when i go into the windows logs i get this message:

Fel-bucket , typ 0
Händelsenamn: LiveKernelEvent
Svar: Inte tillgänglig
Kabinett-ID: 0

Problemsignatur:
P1: 141
P2: ffffae8746c864a0
P3: fffff80236c3fea8
P4: 0
P5: 3344
P6: 10_0_17134
P7: 0_0
P8: 768_1
P9: 
P10: 

Bifogade filer:
\\?\C:\WINDOWS\LiveKernelReports\WATCHDOG\WATCHDOG-20180722-1007.dmp
\\?\C:\WINDOWS\TEMP\WER-2563031-0.sysdata.xml
\\?\C:\ProgramData\Microsoft\Windows\WER\Temp\WER5DD1.tmp.WERInternalMetadata.xml
\\?\C:\ProgramData\Microsoft\Windows\WER\Temp\WER5E11.tmp.xml
\\?\C:\ProgramData\Microsoft\Windows\WER\Temp\WER5E2F.tmp.csv
\\?\C:\ProgramData\Microsoft\Windows\WER\Temp\WER5E6F.tmp.txt

Filerna kan vara tillgängliga här:
C:\ProgramData\Microsoft\Windows\WER\ReportQueue\Kernel_141_93315b5537862960f7b2a2928cccd69d046a9_00000000_cab_27975e6e

Analyssymbol: 
Kontrollerar lösning igen: 0
Rapport-ID: 34543b4d-d9e8-47ff-a47c-f1e667549458
Rapportstatus: 4
Hash-bucket: 
Cab-GUID: 0

I saw on another post they told me to freshly reinstall my drivers i did that but still no luck.

Graphics card is: AMD Radeon RX460 2GB.

Read other answers
RELEVANCY SCORE 59.6

Windows Vista Business - Dell Desktop - IE9 Application Crash

A couple weeks ago I decided to download IE9 since I have been using Chrome mostly and every so often Firefox. Regardless, IE9 Crashes and loops with Windows error reporting prompts until close is clicked heavily or the application is force closed. I have included the event viewer information below. Im troubleshooting now but was also curious about some of the causes associated with this error.


INFORMATION entry via Event Viewer

Event 1001 Windows Error Reporting

Fault bucket 2511977869, type 1
Event Name: APPCRASH
Response: None
Cab Id: 0

Problem signature:
P1: iexplore.exe
P2: 9.0.8112.16421
P3: 4d76255d
P4: igdumdx32.dll
P5: 8.15.10.2413
P6: 4de942fb
P7: c0000005
P8: 00009754
P9:
P10:

Attached files:
C:\Users\James\AppData\Local\temp\WER45AE.tmp.version.txt

These files may be available here:

ERROR via Event Viewer

Faulting application iexplore.exe, version 9.0.8112.16421, time stamp 0x4d76255d, faulting module igdumdx32.dll, version 8.15.10.2413, time stamp 0x4de942fb, exception code 0xc0000005, fault offset 0x00009754, process id 0x17f8, application start time 0x01cd0d684160eda5

A:Event 1001 Windows Error Reporting

Hi
One solution appears to be to turn off accellerated graphics in internet explorer 9: -

How to Disable Hardware Acceleration (GPU Rendering) in Microsoft Internet Explorer 9 (IE9) to Fix Font Problem? - Tweaking with Vishal

The other is to update the graphics drivers from Intel: -

Intel? Driver Update Utility

Read other 3 answers
RELEVANCY SCORE 58.4

Hi all,
One of our PCs shutdown twice and one day I checked to see why it was shutting down and I got an error that was:




-


System













-


Provider









[
Name]


Microsoft-Windows-WER-SystemErrorReporting









[
Guid]


{ABCE23E7-DE45-4366-8631-84FA6C525952}









[
EventSourceName]


BugCheck

















-


EventID


1001









[
Qualifiers]


16384

















Version


0

















Level


2

















Task


0

















Opcode


0

















Keywords


0x80000000000000

















-


TimeCreated









[
SystemTime]


2015-08-04T20:33:25.000000000Z

















EventRecordID


4418

















Correlation

















-


Execution









[
ProcessID]


0









[
ThreadID]


0

















Channel


System

















Computer


XXXXXXXXXXX

















Security






 




-


EventData









param1


0x0000004a (0x0000000074a32e09, 0x0000000000000002, 0x0000000000000000, 0xfffff880081f6b60)









param2


C:\windows\MEMORY.... Read more

Read other answers
RELEVANCY SCORE 58

help me plz for this error : Crash in the fifa 17 :

Event id : 1001

Fault bucket , type 0 Event Name: StoreAgentScanForUpdatesFailure0 Response: Not available Cab Id: 0

Problem signature: P1: WSAutoUpdate P2: 80070422 P3: 10586 P4: 589 P5: Windows.Desktop P6: P7: P8: P9: P10:

Attached files: C:\Users\SAEED-PC\AppData\Local\Temp\WERE616.tmp.WERInternalMetadata.xml

These files may be available here: C:\ProgramData\Microsoft\Windows\WER\ReportQueue\NonCritical_WSAutoUpdate_95205dc5609fd59e5eab4b91e971fb728a3f358_00000000_cab_01e2e635

Analysis symbol: Rechecking for solution: 0 Report Id: c7fed44a-898b-11e6-8761-d54e541e477a Report Status: 4 Hashed bucket:

how to fixed ?!?!

Read other answers
RELEVANCY SCORE 55.6

I have configured a server with Windows Small Business Server 2003. I have set it up to run using a workgroup and not domain. Now periodically the server shutsdown on its own listing the above mentioned Event ID which indicate that ;

"this computer must be configured as a domain controller"

Microsoft's description states that this is the cause of the servers operating system integrated setup was not complete. This is the only server on the network and otherwise the network itself has been running fine outside of the periodic shutdowns.

My question is how can this be done now after the fact and what dtepsd must be taken?

Thank you for any help you can provide.

ME
 

Read other answers
RELEVANCY SCORE 52.8

Here is the error I am getting and it makes it so we have to reboot the PC when it happens? How can I fix this ?




1001


Windows Error Reporting


N/A


1/25/2017 2:36 PM


CPC-VNG








Message:


Fault bucket , type 0
Event Name: AppHangB1
Response: Not available
Cab Id: 0

Problem signature:
P1: Spectrum.exe
P2: 9.0.0.0
P3: 56089bae
P4: be5b
P5: 0
P6:
P7:
P8:
P9:
P10:


Attached files:
C:\Users\CPC - VNG\AppData\Local\Temp\WERED0E.tmp.appcompat.txt
C:\Users\CPC - VNG\AppData\Local\Temp\WERED5D.tmp.WERInternalMetadata.xml

These files may be available here:
C:\Users\CPC - VNG\AppData\Local\Microsoft\Windows\WER\ReportArchive\AppHang_Spectrum.exe_50dc70ec2178cd4cd23a7c45d49df59424de3092_1d0bed7b

Analysis symbol:

Rechecking for solution: 0
Report Id: a9139c79-e34e-11e6-8c87-605718e18f97
Report Status: 1


Thank you for your time.

Read other answers
RELEVANCY SCORE 52.4

Everytime I try to install a software, I get this annoying popup, and all action is rolled back... Any idea how to fix it?? I don't use InstallShield by the way. So the hotfix available doesn't work... :(

A:[SOLVED] Error 1001.InstallUtilLib.dll: Unknown error

Hello; while there is an InstallUtilLib.dll and an InstallUtil.exe, there is not, that I can find, an InstallUtilLib.exe.

Read other 19 answers
RELEVANCY SCORE 52

Hello. I recently upgraded to Win7 and have been dogged by this crash. It will usually happen while playing games, but some games it doesn't happen at all. For instance, I just finished playing Metro 2033 with no problems what so ever, but when I started playing some old school Pirates, the system crashed after just a few minutes. Any thoughts on this?

A:Combination Error 1001 and 41

Can anyone help with this? I'm a stranger to dump files.

Read other 2 answers
RELEVANCY SCORE 52

Hi,

Today I have been getting BSODS on my Laptop in event viewer it shows Event ID 1001. I have attached a memory dump log please could someone look through this and let me know what could be causing this issue?

My laptop is > VPCEC1M1E/WI (VPCEC1M1E/WI) : Technical Specifications : VAIO and Computing : Sony


Many thanks in advance

A:Error ID 1001 BSOD

STOP 0x0000003B: SYSTEM_SERVICE_EXCEPTION: Usual causes: System service, Device driver, graphics driver, memory


Code:
Microsoft (R) Windows Debugger Version 6.11.0001.404 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.

Loading Dump File [C:\Users\richc46\AppData\Local\Temp\Low\Temporary Internet Files\Content.IE5\VNFSFQ1J\081410-17752-01[1]\081410-17752-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available
Symbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7600 MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Machine Name:
Kernel base = 0xfffff800`0300d000 PsLoadedModuleList = 0xfffff800`0324ae50
Debug session time: Sat Aug 14 09:55:19.697 2010 (GMT-4)
System Uptime: 0 days 0:03:53.289
Loading Kernel Symbols
...............................................................
................................................................
.............................
Loading User Symbols
Loading unloaded module list
....
*******************************************************************************
* *
* Bugcheck Analysis *
* *
**********************************... Read more

Read other 5 answers
RELEVANCY SCORE 52

I was trying to install Windows Office Enterprise 2007 when I got this error message and since then I've noticed it on most all attempts to install anything or, to my horror, attempts to uninstall programs. I try to uninstall something and it will get to a certain point and then roll back then give that error message.

How can I fix this???

xdarkmuzex

Read other answers
RELEVANCY SCORE 52

Hello everyone. I had just set my laptop to go to sleep (closed lid), and when I came back about 10 minutes later, it was turned off. When I turned it back on a BSOD error report had shown up.

I have attached the file that the BSOD guide said, but when entering "Perfmon / report", it said "The parameter is incorrect".

I have also uploaded a .txt file with the info that Event Viewer gave me.

Is Windows 7 . . .
- x64
- Original OS
- OEM
- OS is about two weeks old

A:BSOD Error 1001

Hello Niskala
& Welcome to SevenForums!

Let's get to it.

BSOD Summary

Code:
Microsoft (R) Windows Debugger Version 6.12.0002.633 X86
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\Frederik\AppData\Local\Temp\Rar$DI00.164\080911-28033-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*C:\SymCache*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 7601.17592.amd64fre.win7sp1_gdr.110408-1631
Machine Name:
Kernel base = 0xfffff800`02c51000 PsLoadedModuleList = 0xfffff800`02e96650
Debug session time: Tue Aug 9 20:08:08.901 2011 (UTC + 2:00)
System Uptime: 1 days 15:58:38.478
Loading Kernel Symbols
...............................................................
................................................................
............................................
Loading User Symbols
Loading unloaded module list
...........................
*******************************************************************************
* *
* Bugcheck Analysis *
* *
************************************************************... Read more

Read other 9 answers
RELEVANCY SCORE 52

I am trying to download driver detective and when it is installing a little window pops up and says, Error 1001 InstalUtilLib.dll: unknown error.
this window pops up twice, the only option there is is to hit OK. you have to hit this screen twice. After those two pop op screens it pops up with another screen that says, Error:-1603 Fatal error during installation.
Consult Windows Installer Help (Msi.chm) or MSDN for moreinformation.
i have a registered RegCure and ive ran that several times to try to fix this problem. ive scaned with macafee. i dont know what to do. can you help me?heeeeeeeelp!
 

Read other answers
RELEVANCY SCORE 51.6

When I try installing any program I the get message at the end of the installation -Error 1001.InstallUtilLib.dll:Unknown.error. As an example, adobe reader, MS office. Any ideas?

A:Error 1001.InstallUtilLib.dll:Unknown.error

Download the Windows Installer Cleanup Utility and see if that helps

Read other 1 answers
RELEVANCY SCORE 51.2

Unable to edit query SQL when there is a where clause but no group by without getting the -1001 error. 

Example:  This query is fine. 
SELECT DISTINCT BB1.StudentID, Table43.Booking_date, Table43.Session
FROM BB1 INNER JOIN Table43 ON BB1.StudentID = Table43.StudentID
WHERE (((Table43.Session)="230"));
But if I simply enter the SQL editor (and don't even make a change), I can not save it without the Reserved -1001 error popup even if it was already saved as is earlier.  Apparently it needs notation like
SELECT DISTINCT [BB1].[StudentID], [Table43].[Booking_date], [Table43].[Session]
FROM BB1 INNER JOIN Table43 ON [BB1].[StudentID] = [Table43].[StudentID]
WHERE ((([Table43].[Session])="230"));
in order to be accepted. In particular the [] around the field before the FROM
SELECT DISTINCT [BB1].[StudentID], [Table43].[Booking_date], [Table43].Session
FROM BB1 INNER JOIN [Table43] ON BB1.[StudentID] = Table43.[StudentID]
WHERE ((([Table43].[Session])="230"));
is no good, but
SELECT DISTINCT [BB1].[StudentID], [Table43].[Booking_date], [Table43].[Session]
FROM BB1 INNER JOIN [Table43] ON BB1.[StudentID] = Table43.[StudentID]
WHERE ((([Table43].[Session])="230"));
will work.

Read other answers
RELEVANCY SCORE 51.2

My computer crashed with blue screen in every few minutes. And everytime it boots up again it shows the 2 errors below in event viewer.

Regard
Siraj Mulla

A:Could anyone help about this error EventID 1001 - 1003

Test RAM

Read other 4 answers
RELEVANCY SCORE 51.2

Hi, I cannot uninstall, repair, or install Virtual Router v0.9 Beta. Codeplex does not respond at all to the 1001 error, as I have seen from some posts over a year old. I would like to remove it, and I believe the error originated after a system restore.During Uninstall attemptError 1001. Exception occurred while initializing the installation:System.IO.FileNotFoundException:Could not load file or assembly 'file:///D:\Program Files (x86)\VirtualRouterService.exe' or one of its dependencies. The system cannot find the file specified.I hit ok, and then it says to close.During Repair attemptError 1001. The specified service already exists >>>> I then hit okay and this pops up:Error 1001. Could not find file 'D:\Program Files (x86)\Virtual Router\VirtualRouterClient.InstallState'. >>>I then hit close to exit.I imagine the solution to be to install it on another computer and copy the files onto my current via a flash drive, however I do not have the resources necessary to do this. I would like some help or alternative options please. Thank you for your time.

A:Virtual Router Error 1001

Hi ajax - -There seems to be a lot of people with Virtual Router problems -http://www.google.com.au/url?sa=t&source=web&cd=11&ved=0CB0QFjAAOAo&url=http%3A%2F%2Fvirtualrouter.codeplex.com%2Fdiscussions%3Fsize%3D2147483647&ei=H_OXTuW-KYmTiQei5M2rAg&usg=AFQjCNFUBgbjWuxuWmte6bP__4Oj7fL9qgThis link shows some solutions to try and many of the other problems people have. There may be one listed fix here that helps you -Regards -

Read other 4 answers
RELEVANCY SCORE 51.2

Windows 7
-x64
Windows 7 Ultimate
Full Retail
System Hardware is all new
First Install of the OS

1 x LG 22X DVD Burner - Bulk Black SATA Model GH22LS50 LightScribe Support - OEM
1 x SAMSUNG EcoGreen F2 HD103SI 1TB 5400 RPM SATA 3.0Gb/s 3.5" Internal Hard Drive -Bare Drive
1 x OCZ Signature 4GB (2 x 2GB) 240-Pin DDR3 SDRAM DDR3 1333 (PC3 10666) Desktop Memory Model OCZ3SR1333LV4GK
1 x OCZ Fatal1ty OCZ550FTY 550W ATX12V v2.2 / EPS12V SLI Ready 80 PLUS Certified Modular Active PFC Power Supply
1 x Intel Core i3-540 Clarkdale 3.06GHz LGA 1156 73W Dual-Core Desktop Processor BX80616I3540
1 x GIGABYTE GA-H55N-USB3 LGA 1156 Intel H55 HDMI USB 3.0 Mini ITX Intel Motherboard

Did a low-level format of the HDD before installing the O/S and drivers. Everything seemed fine till I turned it on this morning. I left the computer idle for a few minutes and came back to it recovering from a BSOD.

As for the report I am running MSE for virus protection. I am also managing Windows Update myself.

I've followed the instructions for BSOD's as per forum rules and have attached a copy of the report as a zip file.

A:BSOD - Error 1001 - Bug Check

  
Quote: Originally Posted by Mazdem


Windows 7
-x64
Windows 7 Ultimate
Full Retail
System Hardware is all new
First Install of the OS

1 x LG 22X DVD Burner - Bulk Black SATA Model GH22LS50 LightScribe Support - OEM
1 x SAMSUNG EcoGreen F2 HD103SI 1TB 5400 RPM SATA 3.0Gb/s 3.5" Internal Hard Drive -Bare Drive
1 x OCZ Signature 4GB (2 x 2GB) 240-Pin DDR3 SDRAM DDR3 1333 (PC3 10666) Desktop Memory Model OCZ3SR1333LV4GK
1 x OCZ Fatal1ty OCZ550FTY 550W ATX12V v2.2 / EPS12V SLI Ready 80 PLUS Certified Modular Active PFC Power Supply
1 x Intel Core i3-540 Clarkdale 3.06GHz LGA 1156 73W Dual-Core Desktop Processor BX80616I3540
1 x GIGABYTE GA-H55N-USB3 LGA 1156 Intel H55 HDMI USB 3.0 Mini ITX Intel Motherboard

Did a low-level format of the HDD before installing the O/S and drivers. Everything seemed fine till I turned it on this morning. I left the computer idle for a few minutes and came back to it recovering from a BSOD.

As for the report I am running MSE for virus protection. I am also managing Windows Update myself.

I've followed the instructions for BSOD's as per forum rules and have attached a copy of the report as a zip file.


Memory exception caused by Team Viewer. Remove and re-install newest version (stay away from version 6 beta)
Ken J

Read other 1 answers
RELEVANCY SCORE 50.8

I am getting this bugcheck error with a reboot. Any thoughts. Win 7 - Dell 9010 - 8 gigs ram - Very basic setup - typical office setup and anything specialized is done through the browser. 

error 1001 

The computer has rebooted from a bugcheck. The bugcheck was: 0x00000119 (0x0000000000000001, 0x00000000000122b7, 0x00000000000122b8, 0x00000000000122b8). A dump was saved in:
C:\Windows\MEMORY.DMP. Report Id: 012516-12292-01. 


+ System 
- Provider 
[ Name] Microsoft-Windows-WER-SystemErrorReporting 
[ Guid] {ABCE23E7-DE45-4366-8631-84FA6C525952} 
[ EventSourceName] BugCheck 
- EventID 1001 
[ Qualifiers] 16384 
Version 0 
Level 2 
Task 0 
Opcode 0 
Keywords 0x80000000000000 
- TimeCreated 
[ SystemTime] 2016-01-25T15:47:32.000000000Z 
EventRecordID 85311 
Correlation 
- Execution 
[ ProcessID] 0 
[ ThreadID] 0 
Channel System 
Computer 810-124107.ad.cfcc.edu 
Security 
- EventData 


param1 0x00000119 (0x0000000000000001, 0x00000000000122b7, 0x00000000000122b8, 0x00000000000122b8) 


param2 C:\Windows\MEMORY.DMP 


param3 012516-12292-01 

rmletc

Read other answers
RELEVANCY SCORE 50.8

I have sbcglobal.net DSL, when I click on FINANCE, I get subject message. Help, please.
 

A:A my Yahoo! server error (code 1001)

what ur getting is an error telling you that the servers are super busy or there is a technical difficulty with the yahoo server. Try restarting your browser then logging back in and see if it works..if it doesnt then something is wrong with yahoo's servers
 

Read other 1 answers
RELEVANCY SCORE 50.8

Hello Everyone...I need your assistance to fix my problem. My computer just crashed with a blue screen and sometimes it freeze. I've searched this error on google and I end up here.
https://onedrive.live.com/?id=56CE63709EDBEB64!108&cid=56CE63709EDBEB64&group=0
That's the link to my memory minidump file. Honestly I had 3 memorydump files, but I uploaded only one file to focus on it. Just let me know if you really need the other two dump files. THANK YOU!!! and GOD BLESS US ALL..

Read other answers
RELEVANCY SCORE 50.4

Hello, I could use some help with a blue screen issue, I've been having for a little while now, not sure how it happened or why but whenever I'm AFK from my computer for to long it gives me a blue screen crash with the error 0x0000001a (0x0000000000000031, 0xffffffa800aa60900,0xffffff8800d56700, 0xffffff8a0023351ac) page fault in non-paged area, I'm feeling that I should note also the the error number has changed recently but has been the same cause and result, if needed I'll post that to, also I'm rather techno illiterate so please keep it as simple as possible for me

Edit: sorry forget to upload this

A:DSOD while AFK, bug report error 0x0000001a event ID 1001

Welcome to the forum,

It looks like IObit is causing it, there's only one dump but it gets the flag,


Code:
BugCheck 50, {ffffffffffffffd0, 1, fffff800030ae75d, 0}

*** WARNING: Unable to verify timestamp for pffilter.sys
*** ERROR: Module load completed but symbols could not be loaded for pffilter.sys
Loaded symbol image file: pffilter.sys
Image path: \??\C:\Program Files (x86)\IObit\Protected Folder\pffilter.sys
Image name: pffilter.sys
Timestamp: Sun Nov 18 18:07:22 2012 (50A9945A)
CheckSum: 0000F643
ImageSize: 00028000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
I would get rid of anything IObit and see if it helps.

Here's a tutorial for that,

IObit Products - Uninstall Completely

Read other 1 answers
RELEVANCY SCORE 50.4

Not having much faith in finding the answer to this, since quite a few people have reported this. I've seen about a dozen threads, some having no suggestions, others have suggestions, but none of them have worked for us. We have a few Zbooks, Windows 7 Profesional, and we cannot get Disk Security to install. Gives error 1001. Disabled AntiVirus. Booted into safe mode. Uninstalled any conflicting HP software, still no go. Spent two hours on chat with HP yesterday, tech unisntalled, reinstalled, uninstalled, reinstalled, uninstalled, reinstalled, etc over and over. I finally gave up as I was sick of having to keep logging back in after each reboot. Does anyone have any suggestions? 

Read other answers
RELEVANCY SCORE 49.2

Hi all,

I recieved my new notebook clevo170hm yesterday. The laptop was working fine for 2 days, but today it started behaving weirdly when I tried connecting it to the LAN internet and it said "no network access" and "unidentified network". I remembering installing a windows update and after a reboot this error came up, before the update things were good . Here's the event viewer error description:

Code:
Your computer was not assigned an address from the network (by the DHCP Server) for the Network Card with network address 0x0090F5C1E007. The following error occurred: 0x79. Your computer will continue to try and obtain an address on its own from the network address (DHCP) server.
Apart from that I tried connecting to my wifi network, still gave me the same error " unidentified network". Here is the cmd command result for "ipconfig/all"

Code:
C:\>ipconfig/all

Windows IP Configuration

Host Name . . . . . . . . . . . . : #####-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

Ethernet adapter Local Area Connection:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : JMicron PCI Express Gigabit Ethernet Adapter
Physical Address. . . . . . . . . : 00-90-F5-C1-E0-07
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes... Read more

A:Network connection error 0x79, IP not assigned by DHCP. Event ID 1001

Forgot to mention, I do not have a router or modem. I am living in university accommodation hence all I got on the other end is a n ethernet socket.

Read other 1 answers
RELEVANCY SCORE 49.2

Hi all and thanks for your help in advance. This problem is driving me nuts. Did a fresh install of Windows 7 64 bit on a Packardbell Easynote TE69, all was running fine for a while but then on shutdown/restart I would get a hang that would last for 5 minutes or so. When the system was turned back on I would occasionally see a BSOD flash up, every time after the hang I would get the "Your system has recovered from an unexpected shutdown message" with error code 0x0000009f. Googling has turned up little. I have found the same error codes in event viewer in relation to Bugcheck under event ID 1001. Driver Power State Failure pops up loads when searching and so does updating my Wi-fi driver which I have done but no change. The only other symptom is that my usb mouse only works intermittently, I have tried several new ones, but the problem remains. I have attached my minidump file. Any help would be awesome. Thank you.

A:Unseen BSOD after shutdown hang, error 0x0000009f - bugcheck 1001 ID

Blue Screen of Death (BSOD) Posting Instructions

Read other 7 answers
RELEVANCY SCORE 48.4

Hello there. Recently my computer have just randomly shutdown meanwhile i'm playing games like CS;GO, League of Legends. The screen will just turn black and it will start to make one hell of annoying noise untill it reboots.

I've updated all my drivers. Tested my memory. Tested my RAM. Run a virus scan. Checked the heat on my Graphic card and CPU. and all seems to work just fine.
This is the errors i get:


Code:
Log Name: System
Source: EventLog
Date: 25-12-2013 19:10:41
Event ID: 6008
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: Snaski-PC
Description:
The previous system shutdown at 19:08:21 on ‎25/‎12/‎2013 was unexpected.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="EventLog" />
<EventID Qualifiers="32768">6008</EventID>
<Level>2</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2013-12-25T18:10:41.000000000Z" />
<EventRecordID>2045</EventRecordID>
<Channel>System</Channel>
<Computer>Snaski-PC</Computer>
<Security />
</System>
<EventData>
<Data>19:08:21</Data>
<Data>‎25/‎12/‎2013</Data>
<Data>
</Data&... Read more

A:Error 41, Error 1001 and error 6008.

Hi Snaski.

It is some display/graphics related issue.

Are you overclocking? As you are getting BSODs, you should stop overclocking and run all the hardware components like CPU, GPU and RAM to their default settings.

Check if the Power Supply Unit (PSU) supplying adequate power to the computer or not.
eXtreme Power Supply Calculator
Also let us know the wattage of the PSU.

Stress test the Graphics Card using Furmark.
Video Card - Stress Test with Furmark
Let us see a screenshot of the furmark window, just before you close it.

Is the computer hot? Report us the heat of the computer after a couple of hours of your normal usage. Upload a screenshot of the summery tab of Speccy. Alternatively, you can publish a Speccy snapshot too: Speccy - Publish Snapshot of your System Specs .

Install the NVIDIA DRIVERS 314.22WHQL only.
Uninstall All nvidia items in Control Panel > Programs and features3D Vision Control Driver
3D Vision Driver
Graphics Driver
HD Audio Driver
PhysX
nvidia Update
(Are you using nvidia chipset drivers? If so, dont uninstall anything other than those are listed).
Now follow Drivers - Clean Left over Files after Uninstalling
Download 314.22 WHQL. While installing, Select Custom (Advanced) install. In the next page, follow this settings:
Let us know the results.
_____________________________________________________________________________________

Code:
*******************************************************************************
* ... Read more

Read other 7 answers
RELEVANCY SCORE 46.8

I've been having this problem for a couple of months, and it's recently gotten to at least 1 blue screen a day, to 1 every other day. I know nothing about the inner workings of my computer, and it can't be overheating because I have my tower in an optimal position with a fan blowing on it.
It always seems to go when I'm listening to streaming music, but this has always been a daily process. I listen to music through the Pandora Internet Radio, talk to a friend on a pixelated 2D game, and I run MSN Messenger to talk to another friend. It's really starting to worry me, I don't want my computer to fail completely on me.
My brother-in-law couldn't seem to help, either, even though he's studied computers for a couple years and he's upgraded his own several times before in the past.
Is it a simple matter of needing to do updates? Or is it something more severe where I need to download this and that to fix it? I'm hoping for the former, but that's why I'm here, to seek help with the issue.

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 1033

Additional information about the problem:
BCCode: 1e
BCP1: FFFFFFFFC0000005
BCP2: FFFFF80002F7F6EA
BCP3: 0000000000000001
BCP4: 0000000000000018
OS Version: 6_1_7601
Service Pack: 1_0
Product: 768_1
Event Viewer:
[ EventSourceName] BugCheck
- EventID 1001

The computer has rebooted from a bugcheck. The bugcheck was: 0x0000001e (... Read more

A:Windows 7 BSOD - BCCode 1e, BugCheck 1001

Welcome aboard.

Please post it following the Blue Screen of Death (BSOD) Posting Instructions.

Read other 6 answers
RELEVANCY SCORE 46.8

got two errors of bug check in an hour pc automatic rebooted once and got hanged 2nd time
i have attached both the files plzz help me and tell me whats the problem with it thx in advance

A:bug check 1001 windows 7 32bit helppp

  
Quote: Originally Posted by jay93


got two errors of bug check in an hour pc automatic rebooted once and got hanged 2nd time
i have attached both the files plzz help me and tell me whats the problem with it thx in advance



two problems

Please remove any CD virtualization programs such as Daemon Tools and Alcohol 120%.

They use a driver, found in your dmp,sptd.sys, that is notorious for causing BSODs.

Use this SPTD uninstaller DuplexSecure - Downloads

when you're done you can use this Freeware MagicISO Virtual CD/DVD-ROM(MagicDisc) in its place.
two hardware
Your .dmp file shows a stop error of 0x124 which is a general hardware error .

A "stop 0x124" is fundamentally different to many other types of bluescreens because it stems from a hardware complaint.

Stop 0x124 minidumps contain very little practical information, and it is therefore necessary to approach the problem as a case of hardware in an unknown state of distress.

You can read more on this error and what to try here... Stop 0x124 - what it means and what to try Stop 0x124 - what it means and what to try

Read other 9 answers
RELEVANCY SCORE 46.8

I am randomly getting this BSOD. Sometimes the PC is only on for around 5 minutes, sometimes it happens after the PC has been on for a few hours or even days. No matter if I'm on the Internet or not, creating documents, virus scanning, or just at idle time. Happens anytime. Here is the BSOD specifics from the Event Viewer Bugcheck:

0x000000c5 (0x05d7c0d4, 0x00000002, 0x00000001, 0x82f2c943)
Event ID - 1001
Qualifiers - 16384
Guid - {ABCE23E7-DE45-4366-8631-84FA6C525952}
Keywords - 0x80000000000000

System specs:
Windows 7 Ultimate 32-bit
NVidia nForce 780i SLI S775 Motherboard
Dual NVidia GeForce GTX285 648m 1GB DDR3 (SLI Bridged) Graphics Cards
Dual Western Digital VELOCIRAPTOR 300GB 10,000 rpm Hard Drivres (RAID 0-Stripe Array)
4gb Corsair Dominator XMS2 8500 DDR2 1066 RAM Memory
Intel Core 2 QX9650 3.0GHz QuadCore Processor (no overclocking)
Norton Internet Security 2012

I always keep all software & drivers for everything updated, especially the NVidia drivers & Windows Updates. I kind of suspect the problem may be with the NVidia graphics cards or drivers, not sure tho. Could possibly be the Norton Internet Security. Enclosed is the .zip folder. Any help would be greatly appreciated. Thank you.

A:BSOD 0x000000c5 (Event ID-1001) Windows 7

Welcome
Your reports are hinting at a driver, lets try to ascertain which one or if it is indeed a driver.
Driver Verifier
I'd suggest that you first backup your data and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Windows 7 Startup Repair feature).

In Windows 7 you can make a Startup Repair disk by going to Start....All Programs...Maintenance...Create a System Repair Disc - with Windows Vista you'll have to use your installation disk or the "Repair your computer" option at the top of the Safe Mode menu .

Then, here's the procedure:
- Go to Start and type in "verifier" (without the quotes) and press Enter
- Select "Create custom settings (for code developers)" and click "Next"
- Select "Select individual settings from a full list" and click "Next"
- Select everything EXCEPT FOR "Low Resource Simulation" and click "Next"
- Select "Select driver names from a list" and click "Next"
Then select all drivers NOT provided by Microsoft and click "Next"
- Select "Finish" on the next page.

Reboot the system and wait for it to crash to the Blue Screen. Continue to use your system normally, and if you know what causes the crash, do that repeatedly. The objective here is to get the system to crash because Driver Verifier is stressing the dr... Read more

Read other 9 answers
RELEVANCY SCORE 44.8

I had tried from the early win10 early betas to upgrade from win 8.1 pro 64 bit. I continually got
the error: "The installation failed in the SECOND_BOOT phase with an error during MIGRATE_DATA operation" and the code "Error 0x8007002C - 0x4000D". I had tried the fixes recommending by microsoft, including disabling/unistalling antivirus(Bitdefender), removing unneeded peripherals, scanning system files, to no avail. After months of trying various builds, including the final, no luck. I had tried upgrading via iso and windows update. Every time the installation hung at the same spot 86 percent. However, I was finally able to get build 1511 11082 to install. Now, however, my concern is the expiration date in July 2016. I have tried unsuccesfuly via windows update and iso files to upgrade to newer release preview versions, however the error message returns(installation hangs at 86 percent) and the system rolls back to my current version of win 10. Any help or suggestion would be appreciated. Homebuilt PC, fx6850 cpu, asus m5a99fx board. I am able to clean install with no problems.
Here is a link to my system info and event viewer logs:
Microsoft OneDrive - Access files anywhere. Create docs with free Office Online.

Read other answers
RELEVANCY SCORE 44.4

Ok . I have an HP dv6646us and there is NO OS INSTALED. Oh don't get me wrong I know how to fix that error but the problem is, is that whenever Iget to the formatting process of windows 7 installation it literally freezes and tiles itself with blue lines or something. NO THR RAM AND HDD IS NOT CORRUPTED/BROKEN I have ran multiple tests. The error from formatting is x80070057 and I have tried EVERY SINGLE DISKPART AND BOOTSEC COMMANDS ON THE INTERNET. I have also tried startup repair etc. I booted gparted and it said "Your PNP bios is causing a fatal error" I can't even install a Linux Debian without the formatting process freezing. I also tried booting from CD but it doesn't boot from CD. THE BIOS HAS NO OPTION TO CHANGE AHCII or something like that. I conclude that the bios needs to be updated but I cant do it without a windows Os. There have been over 7 versions of the HP dv 66466us and the change log even states it fixes these problems. The bios comes in a self extracting exe. There is no .bin file. I don't know of its possible to flash the bios with usb without a .bin or something If you have any suggestions please do post. My final plan is to find a hard drive with windows on it, replace the bios. If you guys have any info I coul d use please post

A:BIOS error with windows 7 installation error 0x80070057

I would say you are on the short road to finding out your mobo is probably dying/dead.

Read other 2 answers
RELEVANCY SCORE 44

Hi All,

urgent help require. recently i am facing big issue that my server auto restart itself. When i check the Event show as below:

Event ID:1005
Source: Save Dump
Description: unable to produce minidump file from the full dump file

Event ID: 1001
Source: 1001
Source: Save Dump
Description: the computer has rebooted from a bugcheck. The bugcheck was 0x00000027 (0xb550d76c, 0xb550d468, 0xb550d468, 0x8846165e). A dump was saved in C:windows\memory.dmp

Please advise and hope able to provide me a better solution to avoid my server restart itself again.

Thank You.
 

A:Windows Server 2003 auto restart - Event ID 1005 / 1001 (Source Save Dump)

Without seeing the minidumps this is your error per auhma.org:

0x00000027: RDR_FILE_SYSTEM
This is a rare and fairly obscure error condition. Memory management issues can be one cause, and adding additional RAM commonly will resolve this version of the problem.
 

Read other 10 answers
RELEVANCY SCORE 43.6

I tried to installing my game, it's popup say: Setup was unable to create the directory "C:\users\owner\appdata\local\temp\is-4df2.temp, error 5 Access denied. Also I got another error as different install setup, "Could not initialize installation C:\~GLC1034.tmp the system cannot find the file specified" 
 
I tried to scan my HDD as Malwarebyte..it won't help me bit little.
 
 
Help?!

A:Windows 7 Problems: Error 5 and Installation Error...

Hi,
 
Are you running the programs as Administrador? If not sure right click the installer and click Run as Administrator.

Read other 14 answers
RELEVANCY SCORE 42.8

Hi, I'm french
and it's difficult for me to find an answer in this forum. Excuse my english.
My problem. When I start my computer I 've black screen and "windows boot manager" 's message.

Insert your windows installation disk ...
File / boot/ BCD
Status : 0xc000000f
Info : an error ...

So, my CD / DVD is KO.
I try to boot system with USB key. In this usb key I have iso windows 7 downloaded on a french site.
No results ans a message : Invalid system disk. Replace the disk and press any key.

I 've to erase my USB key in NTFS ? FAT 32 ?
How to have a boot key ?
Thanks for answer

Read other answers
RELEVANCY SCORE 42.8

Hi,
I have tried to install windows 7 a couple of times on my SamsungRV409 laptop,
But at the end of every installation after the Dialog Box "Windows is finalizing your installation".. an error shows up:
"Logon Process error"
"Client Error".
And then my Laptop Logs off and reboot on itself, and it doesn't start up.
i Have refered to many internet threads regarding the same,
but nothing is working out.
Please help..

A:Windows 7 Installation error

Automated Fix for Windows 7 SP1 Install Failures 0x8004a029, 0x80004005 - E_FAIL - Softpedia

Clean Install Windows 7

Here are a couple of tutorials to get you started. You will have more questions.

Read other 9 answers
RELEVANCY SCORE 42.8

When trying to install just about any program/game, I recieve this error message.

http://67.15.82.157/error.jpg

System Information:
Windows XP Home Edition (SP1)

Thanks!
 

A:Windows Installation Error

See if these fixes help at all:

http://support.microsoft.com/default.aspx?scid=kb;en-us;315346
 

Read other 2 answers
RELEVANCY SCORE 42.8

when i try to install xp in my new pc i get this error even before any files get copied

bad_exhandle

and i have to restart the pc

next i get an error saying

irql_not_less_or_equal

i have an athlon xp 1800 processor
256 ram
40 gb hard drive
and new sis motherboard

windows millenium seems to install fine but i want xp

any help would be grateful
 

A:windows xp installation error

This is a duplicate post. Stick to one thread or it gets confusing. I replied to http://forums.techguy.org/t114921/s.html
 

Read other 1 answers
RELEVANCY SCORE 42.8

Hello,

I'm posting regarding my laptop an Asus k40ij with Vista Business currently installed. I've been having alot of problems with Windows 7 and the laptop. It was sent in for repair twice in the past couple of months to try and solve these problems and I just got it back from the second repair attempt. Unfortunately I can no longer even install Windows 7 it errors part way through.

The error I get is 0x80070570. It tells me it failed to install required files please restart the installation. This happens when booting from the disk, when trying a clean install from the desktop and when trying to upgrade. It occurs with both copies of Windows 7 that I have. The purchased one that is an "official" Windows copy and the one provided from the laptop manufacturer. It is upgrade media. I've previously used both disks to install Windows 7 and have been successful.

The error occurs right at the extracting files part. Initially it was happening at the very beginning before the installation even started. The tech support was completely useless and suggested it was an issue with the disks. This doesn't make much sense to me as I've used the two disks successfully in the past, and it's not only one disk that's having the issue. Not to mention they aren't an ISO I burned they're the one provided by the manufacturer and the store bought one. I tried updating the BIOS and it was already in it's most up to date form. Tried updating all the drivers before hand too none o... Read more

A:Windows 7 Installation Error

Hi -

I would suggest that you wipe the HDD with KillDisk, install Vista, then upgrade to Windows 7.

Regards. . .

jcgriff2

`

Read other 1 answers
RELEVANCY SCORE 42.8

Do I have to delete all partitions in order to install windows 7? Can I keep my D: drive and only format the C: drive? I got an error on expanding window files, it was stuck at 0% and gave me an error code x800 something I couldn't remember correctly.

I've deleted my C; drive and the system partition left only D: Drive with only 200mb+ left.

Has anyone experienced the same problem like me?
Please help TT.

Thank you in advance!

A:Windows 7 installation Error

see comments in bold:








  
Quote: Originally Posted by Casperlicious


Do I have to delete all partitions in order to install windows 7?

No, but you can if you want to. You could delete them all or instead install to an existing partition if it's large enough.


Can I keep my D: drive and only format the C: drive?


Yes, but you should backup what's on D before you begin as a safety precaution.


In an ordinary installation process, you don't tell Windows to format anything.

You just select where you want to install and Windows will that space automatically if necessary.





I've deleted my C; drive and the system partition left only D: Drive with only 200mb+ left. Has anyone experienced the same problem like me?

You probably have some "unallocated space" where C used to be. You could choose that space and Windows will install to it, making a new C partition in the process.

I don't know anything about the error you mentioned.

What choices do you see when you get to the screen that says "Where do you want to install Windows", or can you get that far?

Read other 6 answers
RELEVANCY SCORE 42.8

I have been attempting to install Windows 8 using WDS for the past two hours.

Every time I install it using WDS, I get the following errors in the attached picture. If I burn that same ISO image to a disc, everything works fine.

I have tried two different versions of the iso image (en-US and en-GB), verified that the hashes are correct, tried VMs and a physical machine, tried with and without an unattend.xml file.

Every time I run into that error (xC0000005). I was given some explanations on what would cause that error, the first being bad ram, the second being a bad hard drive. Well, I don't think that that is the case in this scenario unless all of my VMs, and computers are going bad.

I would really appreciate the help, has anyone had success when attempting to use WDS for installing Windows 8?

A:Windows 8 Installation Error using WDS

Best to burn the ISO to DVD, & clean install.

Read other 2 answers
RELEVANCY SCORE 42.8

Hey,

i have tried to install Windows 7 Ultimate (x86) to my laptop (Fujitsu Siemens AMILO La1703) for a few times.

The installation fails just before second restart. When the restart timer is at 0, blue screen pops up instead of restart. After waiting about 20 minutes, windows shows the following error:
Driver_power_state_failure

Technical information:
xxx STOP: 0x0000009FC 0x00000003 0x84766648 0x82531AE0 0x86FESB28

My current operating system is Windows vista home basic, and my laptop meets all the technical requirements.

Any help with this would be much appreciated.

A:Windows 7 installation error

Does anyone have any ideas?

Read other 1 answers
RELEVANCY SCORE 42.8

well hi folks! ok this is the problem: i started to reinstall a win xp proffessional. during the installation it all kinda hung up and i had to restart the computer. when i turned it on it said that it will run the setup from the beginning! shortly after that i had another message saying error something is wrong with the cd your installing from. so then i took out the cd and cleaned it. when i had it inside the computer again it said it's 39 minutes left till the installation is complete. the thing so far is that i am still at 39 minutes of installation, it keeps telling me what's its installing (you know the facilities in the new xp proffesional) and the other problem is that im still using the 1st installation cd. no errors this time, but from what im seeing it seems like it's not installing at all... what to do pleasE!!

ps: im using my cousins pc atm!!! PLEASE WHAT CAN I DO?!!!
 

A:windows xp installation error

Please don't double-post.

http://forums.techguy.org/showthread.php?t=646825
 

Read other 1 answers
RELEVANCY SCORE 42.8

Hi everyone,
I have built new PC ( mb: asus M5A78L-mlx Plus,cpu: AMD 2 x 260,4GB Ram AM3,1TB HDD) Trying to install windows 7 Pro 64 bit and i get this error saying "Windows cannot install required files.Make sure all files required for installation are available ,and restart the installation." when the file are expanding.(0%).I have already changed the hdd, replaced dvd rom ,disable usb in bios,changed sata cable,removed the batt on MB and still no luck so far.
Please help me out here.
Regards

A:Error during windows 7 Pro 64 bit installation

Where did you get Win7? Did you burn the DVD yourself? Confirm the ISO or download another and burn DVD using ImgBurn at 4x speed.

How do you plan to activate Win7?

Read other 8 answers
RELEVANCY SCORE 42.8

I've been trying to install Windows XP SP2 for a short while now. The problem I have encountered at the moment is this error with installing my video card...

It reads...

The software you are installing for this hardware

NVIDIA GeForce 7600 GT

has not passed Windows Logo testing to verify its companitibility with Windows XP

Continuing your installation of this software may impar or destabilize the correct operation of your system either immediately or in the future. Microsoft strongly recommends that you stop this installation now and contact the hardware vendor for software that has passed Windows Logo testing.

Do you want to continue installing the software for this hardware?

I have a few issues at this point...

My keyboard and mouse do not move or have been disabled so they do not seem to work. My video card is a GeForce 6800 GT.

is there any solution to his horrifying problem?

to answer a few questions... i am currently in the process of installing SP2

edit : the monitor drivers are definitely still there because i see the background that tells you about what's new in SP2 changing itself ocassionally
 

A:Windows XP Installation Error

Read other 12 answers
RELEVANCY SCORE 42.8

Hey Guys,

A couple of days ago my Windows 7 preinstalled samsung laptop crashed and would not boot. Since I didn't have any Windows 7 installation CD and the recovery partition wasn't working. I decided I'll instead clean install with windows 10.

I used Media Creation Tool from Microsoft to download the ISO file and create a bootable USB flash as shown in this tutorial: USB Flash Drive - Create to Install Windows 10 - Windows 10 Forums and I used this tutorial to guide me through the clean install process: Windows 10 - Clean Install - Windows 10 Forums.

I am able to follow the clean install tutorial without any problems until step 7. In step 7 though, when it asked for the product key, the product key of my windows 7 was not being validated. But I know my copy of windows 7 is genuine because till the day my laptop crashed, Windows was constantly sending me the notification telling me to upgrade to Windows 10. Anyway, since I couldn't get the product key to validate, I chose " I don't have a product key" option and went ahead with the tutorial. My laptop originally had 5 partitions,(Recovery, System, Primary,Primary, Logical). But as per step 13 of the tutorial, I deleted all of them (now automatically, only 2 partitions are created: system reserved(500 MB) and partition 2 (297 GB) ) and went ahead. But the problem is that the "installing windows" screen gets stuck and I get an error saying " Windows cannot install required files. Make sure all f... Read more

A:Windows 10 Installation error

Hi Anna,

It is possible you have bad memory modules or some other hardware issue. There is a test you can run from a USB stick that will check whether your memory modules are OK. Lets start with that.

MemTest86+ - Test RAM

Try this and report back. If you get any red line errors you know you have a problem and you can stop the test.

Read other 1 answers
RELEVANCY SCORE 42.8

Hey. I got my windows 7 installation cd today. and I put it into my brand new windows vista computer. the installation started, but then it suddently stopped where it said "the computer has to be restarted". After having this message on the installation screen for 15 min I clicked the off button on the computer, and started it again.

Then the nightmare began, when the computer starts, it says: "starting installation" - then the error message - "The installation process cannot be started". if I click ok. the computer restarts and the same happends. if I X it. the computer restarts and the same happens. Im completely stuck with this error and cant either go back to vista or keep installing windows 7.
Please help.

Tried to hold down F8 when it starts, but nothing happens. For now I just want to go back to vista.

A:Windows 7 installation error.

For installation issues, read these two sticky threads:

Questions to use for help with Installation Issues

Tutorial quick reference list for Installing Windows 7

Read other 6 answers