Over 1 million tech questions and answers.

Update Error 0x80073701 KB4457144 x64

Q: Update Error 0x80073701 KB4457144 x64

The PC installed the update, went to reboot. Upon reboot, system was stuck on "Please wait". After waiting a significant time, powered the PC on into safe mode. After safe mode booted correctly, restarted normally. PC
booted up fine. At the assigned time the system tried to install rollup update KB4457144 and failed with the error code 0x80073701. I have tried other fixes such sfc /scannow and the error keeps occuring. I am at a loss.

Read other answers
RELEVANCY SCORE 200
Preferred Solution: Update Error 0x80073701 KB4457144 x64

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

RELEVANCY SCORE 76

Hey guys 
I've been having a problem with my windows update for a while now. I have basically uninstalled all my updates and tried SFC /scannow multiple times(logs attached). There were some issues pertaining gpedit being activated on my windows 7 home premium which isnt normally active I probably used it for changing my login background a while ago which I have reverted and fixed thanks to another forum using sfc fix and their own files and those errors dont whow up on sfc /scannow, but they havent fixed my issue though, its been over a month since their last response which I have bumped twice patiently but want to fix this issue, I still have the same Windows update error 0x80073701. when I click update it goes for a little then goes to windows update needs an update then I click install now and it goes for a little and shows that error.  I've tried so many Fixit cabs and windows update standalone installer and other stuff to no avail. I have attached my cbs log and windows update log in code. I think I have put all the info available. if you need anything else let me know. 
Thank you guys 

2015-10-11 20:53:38:567 1240 be4 AU Getting featured update notifications. fIncludeDismissed = true
2015-10-11 20:53:38:567 1240 be4 AU No featured updates available.
2015-10-11 20:53:41:782 1240 142c AU Triggering AU detection through DetectNow API
2015-10-11 20:53:41:782 1240 142c AU Triggering Online detection (interactive)
2015-10-11 20:53:41:782 ... Read more

A:Windows update error 0x80073701

well after doing a search on the error versions of windwos update 7.6.7600.320 and 7.6.7600.256 someone recommend to download kb3050265 and i did and it installed fine and i restarted it showed typical windows update configuring xx% and once I restarted it and tried to update it stayed checking for a while then showed 164 updates lol funny how I find it once I posted here lol 

Read other 1 answers
RELEVANCY SCORE 76

Hello guys,
I hate posting new threads on forums without searching and trying which I have done but to no avail have I been able to fix this problem tried so many things fixed corrupt files after sfc scan and so much more but now it is still not fixed.
here are the main errors in getting in the cbs.log file (from the original scan uploaded not the new one)

Code:
2015-04-25 12:25:39, Error CSI [email protected]/4/25:16:25:39.874 (F) d:\win7sp1_gdr\base\wcp\componentstore\csd_locking.cpp(324): Error STATUS_SXS_ASSEMBLY_MISSING originated in function CCSDirectTransaction::LockComponent expression: (null)
[gle=0x80004005]
2015-04-25 12:25:39, Error CSI 0000001f (F) STATUS_SXS_ASSEMBLY_MISSING #10738# from CCSDirectTransaction::OperateEnding at index 0 of 1 operations, disposition 2[gle=0xd015000c]
2015-04-25 12:25:39, Error CSI 00000020 (F) HRESULT_FROM_WIN32(ERROR_SXS_ASSEMBLY_MISSING) #10623# from Windows::ServicingAPI::CCSITransaction::ICSITransaction_PinDeployment(Flags = 0, a = Microsoft-Windows-WindowsUpdateClient-Aux.Deployment-LanguagePack, Version = 7.6.7600.256, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture = [l:10{5}]"zh-TW", VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral, cb = (null), s = (null), rid = [77]"WUClient-SelfUpdate-Aux-AuxComp~31bf3856ad364e35~amd64~zh-TW~7.6.7600.256.Aux", rah = [2]"32", manpath = ... Read more

A:Windows update error 0x80073701

If KB3004394 is installed, uninstall it, and reboot twice.
Do a Check for Updates, and install the new version of KB3004394, and any other updates.
reboot again,
Then run SFC /SCANNOW and CheckSUR again, and post the new logs.

Read other 9 answers
RELEVANCY SCORE 74.4

Hello,

first I have already followed this post:
Windows Update Posting Instructions


Code:
=================================
Checking System Update Readiness.
Binary Version 6.1.7601.21645
Package Version 18.0
2013-04-20 13:05

Checking Windows Servicing Packages

Checking Package Manifests and Catalogs

Checking Package Watchlist

Checking Component Watchlist

Checking Packages

Checking Component Store

Summary:
Seconds executed: 30563
No errors detected
Enclosed the CBS.log.

I have tried nearly all I have found for these errors, but nothing solved it.
As far as I understand, the SP1 is installed, but the update tool cannot find it, or something like this.
Also it could be a problem with the installed language packs, but I could not uninstall or install it again.

You are my last chance, I really do not want to do an inplace upgrade on this productive machine.

Thanks a lot.

Ciao
Andr?

A:IE10 Update gets Error 9C95 and 0x80073701 - ERROR_SXS_ASSEMBLY_MISSIN

Here is the complete CBS folder attached.
The other file in the post before only contains the cbs.log file.

Read other 9 answers
RELEVANCY SCORE 73.6

Hello,
I play a lot of PC games, and in one particular game, I have been having a graphical glitch. This is apparently related to the Windows KB2670838 update, and many people on various forums have solved the problem by removing this update.
I first tried removing the update from 'Programs and Features -> Installed updates', but get an error 0x80073701 'referenced assembly not found'.
Instead I tried to uninstall using the command prompt 'wusu', then tried again in safe mode, and even tried uninstalling IE10, the apparent cause for this update in the first place.
None of these attempts have succeeded for one reason or another, and I wondered if anyone has any help?

A:Unable to uninstall windows update KB2670838, error 0x80073701

Rsstn welcome to SevenForums

when you ran wusa /uninstall /kb:2670838 did you run it inside an Elevated Command Prompt ?

Open up an Elevated Command Prompt. Click on in type CMD . Right click on CMD under Programs (1) choose . On the User Access Control window click on the Yes button . Command Prompt opens up to C:\Windows\System32>_

then type

wusa /uninstall /kb:2670838 and press <ENTER>

Read other 9 answers
RELEVANCY SCORE 59.6

I have a computer that has a few updates that fail to install with error 80073701.

Files from the CBS folder are located here > Dropbox - CBS.zip

Read other answers
RELEVANCY SCORE 47.2

This machine was upgraded shortly after it's initial install from Windows 7 Home Premium to Win Pro 7. I've read all the threads here regarding this problem but still have a question.
I'm probably looking at a complete reinstall but before I do that just to learn more about this problem I am going to try the in place upgrade.
My question is: Do I use the Home Premium disc for the in-place-upgrade - then apply sp1 and then upgrade to Win7 Pro again?
here's the pertinent line from the CBS log:
Failed to resolve execution package: Microsoft-Windows-Branding-HomePremium-Client-Package~31bf3856ad364e35~x86~~6.1.7601.17514
Thanks,

Doug Steinschneider DCS Group

A:Win 7 SP1 fails - ERROR_SXS_ASSEMBLY_MISSING(0x80073701)

Hi,
ERROR_SXS_ASSEMBLY_MISSING(0x80073701) As you say, the easiest way to fix it is to perform an In-place upgrade.
You may copy all the files from Installation Disk and delete ei.cfg file, then implement setup.exe to make an In-place upgrade.Please remember to click ?Mark as Answer? on the post that helps you, and to click ?Unmark as Answer? if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ?

Read other 4 answers
RELEVANCY SCORE 47.2

I've been attempting to add features to my Windows 8 laptop for the past day and haven't found any useful results online. It's a <g class="gr_
gr_21 gr-alert gr_spell gr_run_anim ContextualSpelling multiReplace" data-gr-id="21" id="21">2 week</g> old laptop with Windows 8 Pro 64-bit (Dell Precision M4700), and I'm trying to add the Telnet Client and Hyper-V features
through the Control Panel to no avail. When I try to install them, Windows searches for the required files and comes back with:


"Windows couldn't complete the requested changes. The referenced assembly could not be found. Error code: 0x80073701."


I've tried modifying the Group Policy to make it go through Windows Update to download the necessary installation files, but that hasn't worked (even after some reboots and "<g class="gr_ gr_25 gr-alert gr_spell gr_run_anim ContextualSpelling
ins-del multiReplace" data-gr-id="25" id="25">gpupdate</g> /force"'s). Modifying the same Group Policy to point to an installation CD with the SXS files doesn't work either.


I've tried "<g class="gr_ gr_23 gr-alert gr_spell gr_run_anim ContextualSpelling ins-del multiReplace" data-gr-id="23" id="23">sfc</g> /<g class="gr_ gr_24 gr-alert gr_spell gr_run_anim ContextualSpelling
ins-del multiReplace" data-gr-id="24" id="24">scanno... Read more

Read other answers
RELEVANCY SCORE 46.8

Hi,

I have a Windows 7 Enterprise edition.
When upgrading to SP1 (online or standalone file) I receive error:

ERROR_SXS_ASSEMBLY_MISSING (0x80073701)

I ran the System Update Readiness Tool but it didn't find any problems.
Also sfc /scannow didn't report any errors.

In the CBS log I find these errors:

2011-05-12 13:23:26, Error CSI 0000000e (F) HRESULT_FROM_WIN32(ERROR_SXS_ASSEMBLY_MISSING) #8045# from Windows::ServicingAPI::CCSITransaction::ICSITransaction_PinDeployment(Flags = 0, a = Microsoft-Windows-Help-Customization-OEM-Deployment-LanguagePack, Version = 6.1.7600.16385, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture = [l:10{5}]"it-IT", VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral, cb = (null), s = (null), rid = [109]"Microsoft-Windows-Help-Customization-Package~31bf3856ad364e35~amd64~it-IT~6.1.7600.16385.OEMHelpCustomization", rah = (null), manpath = (null), catpath = (null), ed = 0, disp = 0)[gle=0x80073701]
I don't know why, but for some reason it wants something from an italian language pack:

Microsoft-Windows-Help-Customization-Package~31bf3856ad364e35~amd64~it-IT~6.1.7600.16385.OEMHelpCustomization
- lkpsetup only shows my default english language, no other languages.
- under \windows\system32\catroot\{F750E6C3-38EE-85E5-00C0F4C295EE}\
I have these files:

Microsoft-Windows-Help-Customization-Package~31bf3856ad364e35~amd64~~6.1.7600.16385.cat... Read more

A:Win7 SP1 upgrade: ERROR_SXS_ASSEMBLY_MISSING (0x80073701)

Hi,

Some more info:
CheckSUR.log:

Code:
=================================
Checking System Update Readiness.
Binary Version 6.1.7601.21645
Package Version 11.0
2011-05-17 15:10

Checking Windows Servicing Packages

Checking Package Manifests and Catalogs

Checking Package Watchlist

Checking Component Watchlist

Checking Packages

Checking Component Store

Summary:
Seconds executed: 681
No errors detected
sfc /scannow


Code:
Beginning system scan. This process will take some time.

Beginning verification phase of system scan.
Verification 100% complete.

Windows Resource Protection did not find any integrity violations.
dism /online /get-features | more

Code:
Deployment Image Servicing and Management tool
Version: 6.1.7600.16385

Image Version: 6.1.7600.16385

Features listing for package : Microsoft-Windows-Foundation-Package~31bf3856ad364e35~amd64~~6.1.7600.16385

Feature Name : OEMHelpCustomization
State : Enabled

Feature Name : CorporationHelpCustomization
State : Disabled
...
When I try to disable the OEMHelpCustomization package it stops at 17,9%

dism /online /disable-feature /featureName:OEMHelpCustomization


Code:
Deployment Image Servicing and Management tool
Version: 6.1.7600.16385

Image Version: 6.1.7600.16385

Disabling feature(s)
[========== 17.9% ]

Error: 14081

The referenced assembly could not be found.

The DISM log file can be found at C:\windows\Logs\DISM\dism.log

There are alot of it... Read more

Read other 3 answers
RELEVANCY SCORE 46

Hi
Same problem here! I tried everything as described on Microsoft website....
I have a 64-bit PC. Installation went well on a lot of other 32-bit PC's.
Any help possible?
My logs: http://cid-2f93e2b9c304fade.skydrive.live.com/redir.aspx?resid=2F93E2B9C304FADE!104
Many thanks.

A:Windows 7 SP1 install fails: ERROR_SXS_ASSEMBLY_MISSING (0x80073701)

Checking Component Store
(f)    CSI Missing Winning Component Key    0x00000000    x86_microsoft.vc90.crt_1fc8b3b9a1e18e3b_9.0.21022.8_none_bcb86ed6ac711f91        
(f)    CSI Missing Winning Component Key    0x00000000    x86_microsoft.vc90.openmp_1fc8b3b9a1e18e3b_9.0.21022.8_none_ecdf8c290e547f39        
(f)    CSI Unexpected Failure    0x00000002    9.0.21022.8    x86_microsoft.vc90.openmp_1fc8b3b9a1e18e3b_9.0.21022.8_none_ecdf8c290e547f39    Error deleting winners map value.
(f)    CSI Missing Winning Component Key    0x00000000    x86_microsoft.vc80.mfcloc_1fc8b3b9a1e18e3b_8.0.50727.4053_none_03ca5532205cb096        
(f)    CSI Missing Winning Component Key    0x00000000    x86_microsoft.msxml2_6bd6b9abf345378f_4.20.9870.0_none_b7e00e6c7b30b69b        
(f)    CSI Missing Winning Component Key    0x00000000    x86_microsoft.vc80.crt_1fc8b3b9a1e18e3b_8.0.50727.762_none_10b2f55f9bffb8f8        
(f)    CSI Missing Winning Component Key    0x00000000    x86_microsoft.vc90.mfc_1fc8b3b... Read more

Read other 14 answers
RELEVANCY SCORE 40.4

Tried to install SP1 on my wife's Asus laptop, SP1 download wouldn't install. Ordered a CD, wouldn't install either. Got the above shown message. Reviewed the CBS log and found the following error messages:


2012-09-04 20:50:43, Info CBS Failed to resolve item[0] in Package: Microsoft-Windows-Client-Drivers-Package~31bf3856ad364e35~amd64~fr-FR~6.1.7601.17514, Update: INF_netrndis [HRESULT = 0x80073701 - ERROR_SXS_ASSEMBLY_MISSING]
2012-09-04 20:50:43, Info CBS Failed to resolve execution update. [HRESULT = 0x80073701 - ERROR_SXS_ASSEMBLY_MISSING]
2012-09-04 20:50:43, Error CBS Failed to resolve execution package: Microsoft-Windows-Client-Drivers-Package~31bf3856ad364e35~amd64~fr-FR~6.1.7601.17514 [HRESULT = 0x80073701 - ERROR_SXS_ASSEMBLY_MISSING]
2012-09-04 20:50:43, Info CSI [email protected]/9/5:00:50:43.592 CSI Transaction @0x2d3d20 destroyed
2012-09-04 20:50:43, Info CBS Perf: Resolve chain complete.
2012-09-04 20:50:43, Info CBS Failed to resolve execution chain. [HRESULT = 0x80073701 - ERROR_SXS_ASSEMBLY_MISSING]
2012-09-04 20:50:43, Error CBS Failed to process Multi-phase execution. [HRESULT = 0x80073701 - ERROR_SXS_ASSEMBLY_MISSING]
2012-09-04 20:50:47, Error CBS Failed to perform operation. [HRESULT = 0x80073701 - ERROR_SXS_ASSEMBLY_MISSING]
2012-09-04 20:50:47, Info CBS Sess... Read more

A:Dreaded "error_sxs_assembly_missing(0x80073701)". Next move?

First, please run a couple of system checks.


Please run a full CHKDSK and SFC scan....
Click on Start > All Programs > Accessories
Right-click on the Command Prompt entry
Select Run as Administrator and accept the UAC prompt - the Elevated Command Prompt window should pop up.

At the Command prompt, type
CHKDSK C: /R
and hit the Enter key.

You will be told that the drive is locked,
and the CHKDSK will run at he next boot - hit the Y key, and then reboot.
The chkdsk will take a few hours depending on the size of the drive, so be patient!
After the CHKDSK has run, Windows should boot normally (possibly after a second auto-reboot) - then run the SFC.

SFC -System File Checker - Instructions
Click on Start > All Programs > Accessories
Right-click on the Command Prompt entry
Select Run as Administrator and accept the UAC prompt - the Elevated Command Prompt window should pop up.
At the Command prompt, type
SFC /SCANNOW
and hit the Enter key

Wait for the scan to finish - make a note of any error messages - and then reboot.
Copy the CBS.log file created to your desktop (you can't manipulate it directly) and then compress the copy and upload it to your SkyDrive (http://skydrive.live.com ) and post a link to it so that I can take a look.

Attach a zipped copy of your CBS.log to your reply.

Read other 1 answers
RELEVANCY SCORE 38
RELEVANCY SCORE 36.8

I'm running Windows 7 Pro on my Dell laptop. This laptop has been in storage and hasn't been turned on in a year. Originally, all I wanted to do was use iTunes. The problem:
 
It made me update it in order to use it, but I got an error.
 
I un-installed it and tried downloading a fresh copy and I get the following error:
After some Googling, I read that not having the latest Windows .NET framework might be the problem. Sounded reasonable so I fired up Windows Update but that gave me an error and wouldn't start checking for updates.
 
I managed to get it to check for updates, but now when it starts the process, I get the following:
I Googled the error code "8007007E" and tried a few things to try and fix it.
 
I downloaded the windowsupdatediagnostic.diagcab, found on Microsoft's site, here:http://windows.microsoft.com/en-us/windows/troubleshoot-problems-installing-updates#1TC=windows-7
I tried resetting the Windows Update reset tool, using "MicrosoftFixit50202", found here:http://go.microsoft.com/?linkid=9665683
I download the system readiness tool, found here:https://www.microsoft.com/en-us/download/details.aspx?id=3132
I tried a clean boot.
 
I tried renaming the Windows Update Softwaredistribution folder.
 
None of this worked.
 
I ran the System File Checker tool (SFC.exe) and the results said I had bad files, but I don't know how to fix them. It generated a CBS log, which is too large for me to post (10MB) , so I've uploaded to dropbox,... Read more

A:Windows update error.. System File Checker integrity error..iTunes install error

Open the Command Prompt, copy and paste the commands below one at a time followed by pressing Enter after each command.
 
net stop wuauserv
 
rmdir /s %windir%\softwaredistribution\wuredir
 
net start wuauserv

Read other 9 answers
RELEVANCY SCORE 36

ASUS Desktop PC CM6850 Series
Windows 7 Home Premium SP1
64-bit
Core i7
4GB RAM
500GB HDD
Windows updates not working for a while. Initial was 8007370B appearing in the Windows Update window when searching for updates. Found bad memory using Memtest86+ and pulled the stick. Other stick no errors after 8 passes.

Toshiba HDD installed. Ran two different HDD diagnostics test on it and it passed.

No conflicts in device manager.

Now, Windows Update window showing 80070002 error. Based upon instructions, ran System Update Readiness Tool (SURT) but that appears to have not made any resolution. Ran it twice to ensure it ran successfully.

Then, ran the Windows Update Diagnostic.diagcab from go.microsoft.com/fwlink/?LinkID=231149 and it shows Windows Update error 0x8007370B(2014-09-18-T-06_58_30P) as NOT FIXED. All other items in list shows as FIXED.

SFC /scannow will not run ... displaying the message "windows resource protection could not perform the requested operation". I tried the same in a elevated prompt in normal windows and in safe mode with the same result. No luck running Surface Scan.

Ran chkdsk /r twice also.

Screen captures of both errors and CBS log file attached. Any help is greatly appreciated. In the meantime, I will begin running some antimalware scans just in case.

Thanks for any assistance.

A:Windows Update Error 80070002 & Windows Update Diag Error 0x8007370B

Please follow the Windows Update Posting Instructions and post the requested data
If the file is too large (8MB compressed), remove the older CBSPersist cab files until the final file is below the limit - you can always post them separately after zipping them. (the forum doesn't allow the upload of bare CAB files, for a number of reasons)

We need that data whether or not either CheckSUR or SFC complete.

Read other 9 answers
RELEVANCY SCORE 35.6

Operating System:       Windows Vista Home Premium
Computer:                     Compaq Presario SR5079UK                                          2 gb RAM
Problem:  "Windows Update; Error Code 8000FFFF"   "Unable to uninstall update KB929777"
Solutions Tried:
Disable all Antivirus softwareTry running windows updates, and receive the error message "Error Code 8000FFFF"I have been advised to uninstall update KB929777, when trying to do this I receive a further error"An error occurred, not all of the updates were successfully uninstalled"
I have also tried the above whilst running Windows in safe mode and the same errors are received.
Also tried the following:
Disable all Antivirus softwareAt command prompt; Net Stop WuAuServRename "C:\Windows\SoftwareDistribution"     to     "C:\Windows\sdold"Try installing download update "KB929777" - Unable to installAt command prompt; Net Start WuAuServTry running windows updates and, still receive the "Error Code 8000FFFF"
I have also tried the above in safe mode, however the service "WuAuServ" does not run in safe mode,tried installing the update "KB929777" and receive the error "Installer encountered an error: Ox8007043c. This service cannot be stared in Safe Mode"
I have also tried the following:Removing 1gb of RAM, Re-installing a previous ... Read more

Read other answers
RELEVANCY SCORE 35.6

I'm having no luck installing KB2977629 (Cumulative Security Update IE11). I repeatedly get the error 8007371B.

SURT installs with no errors. SFC /SCANNOW runs with no errors. I am uploading the requested screenshots and ZIP file.

Any help would be appreciated.

Thank you!!!!

PS- well, I WAS uploading. My screencaptures upload great, but my CBS.zip fails with "Server error 500".
My zip file is 9.6mb-- over the 8mb limit. What can I delete from the directory to get under the 8mb limit?


Attachment 333111
Attachment 333112

A:Update Error Code 80073712-Cumulative Security Update IE11, Win 7(64)

I've found a way to get the CBS zip uploaded. I divided it into 4 parts. All of the CBS folder's files are included. Sorry I didn't see this earlier.


Attachment 333122
Attachment 333123
Attachment 333124
Attachment 333121

Read other 1 answers
RELEVANCY SCORE 35.6

Here's another tricky one.
This important security update will not update. It is only 606Kb.
Microsoft says it is caused by a virus problem. I have Norton 360 installed. Norton say it is not a virus.
Microsoft say pay us $120 to fix it. I say I can't afford to pay that for something when I have no way of knowing exactly what the problem really is.
This has been going on since November 2014. All the other updates are installed immediately but not this one.

Security Update for Microsoft .NET Framework 2.0 SP2 on Windows Vista SP2 and Windows Server 2008 SP2 x86 (KB2968292)
Installation date: ‎9/‎04/‎2015 4:08 PM
Installation status: Failed
Error details: Code 800B0100
Update type: Important
A security issue has been identified in a Microsoft software product that could affect your system. You can help protect your system by installing this update from Microsoft. For a complete listing of the issues that are included in this update, see the associated Microsoft Knowledge Base article. After you install this update, you may have to restart your system.
More information:
MS14-057: Description of the security update for the .NET Framework 2.0 Service Pack 2 for Windows Vista Service Pack 2 and Windows Server 2008 Service Pack 2: October 14, 2014

Just noticed this more recent one failed to update -
Security Update for Windows Vista (KB2884256)
Installation date: ‎16/‎03/‎2015 5:43 PM
Installation status: Failed
Error details: ... Read more

A:Vista Important Update will not update. Error details: Code 800B0100

That error is not caused by a virus, it is caused by a file corruption
The readiness tool can correct the problem in many situations
What is the System Update Readiness Tool? - Windows Help

Read other 2 answers
RELEVANCY SCORE 35.6

My problems are essentially those expressed in many previous posts, but specifically this one here was most pertinent (aside from the specific updates of course): Win7 x64 - Unable to Update, Error 800b0100

Here is a list of the updates that are giving me trouble...

Important:
[LIST][*]Security Update for Windows 7 for x64-based Systems (KB2631813)

Optional (but I am pretty sure I need a couple of them to fix other, non-Win issues):
Update for Windows 7 for x64-based Systems (KB2488113)
Update for Windows 7 for x64-based Systems (KB2492386)
Update for Windows 7 for x64-based Systems (KB2511250)
Update for Windows 7 for x64-based Systems (KB2515325)
Update for Windows 7 for x64-based Systems (KB2541014)
Update for Windows 7 for x64-based Systems (KB982018)

I too have followed all the steps mentioned in the post I have cited, and have attached the same documentation as well in hopes of expediting a solution. Ultimately my hope was that some kind soul would be willing and able to provide a customized solution similar to what the previous poster, CoolStory, received from the user niemiro. Thanks in advance and will be sure to check back shortly!

A:Multiple Update Failures / Win7 x64 - Unable to Update, Error 800b010

From the SFC report, it looks like it found a couple of errors in the .NET 3.5 installation - and fixed them (together with a faulty bmp file)
Have you also run a CHKDSK? - often a random error can indicat file system problems, so it would be worth running CHKDSK C: /R and seeing if that helps.

Niemiro hopefully will be around later to assist - but there's nothing in your reports that suggests anything specific he can do.s

Read other 9 answers
RELEVANCY SCORE 35.6

Hey all,

So I am currently reinstalling Windows on my dad's old laptop after the hard drive decided up die on us, and I stumbled on a problem that's a bit too hard for me to fix.

Namely, I am completely unable to install any Windows Update. Not even MSE will install.

I tried running SURT, but got error code 0x8000247
I also tried running SFC /SCANNOW, it ran the verification fase until 98% and then stated that there where unfixable problems.

The displayed error codes are:
In WU: "8024A000"
In SURT: "0x8000247"
Whilst installing MSE: "0x80070643".

Attached you will find CBS.log and MSINFO with my system specs.
Cheers and many thanks in advance,
Nommy

CBS.log MSINFO32.nfo

A:Windows Update error code 8024A000; unable to install any update.

That's very reminiscent of similar errors in Win7 - and I wouldn't be surprised to see it being non-genuine.
Please post an MGADiag report BEFORE doing the below potential fixes.

This may simply be caused by a bad set of Intel Storage Matrix Technology drivers -

Installing the Intel Drivers
try downloading and installing them from here -
https://downloadcenter.intel.com/Det...&DwnldID=17882

(IATA89ENU.exe)

Once complete, please reboot twice, then post another MGADiag report.


If nothing has changed, try this...

Please run the following commands in an Elevated Command Prompt

NET STOP CRYPTSVC
REN C:\WINDOWS\SYSTEM32\CATROOT2 CATROOT2OLD
NET START CRYPTSVC

once complete, leave the system alone for at least an hour to rebuild the database, then reboot, and run another MGADiag report and post the results.

If neither of them work, we'll re-evaluate.

Read other 9 answers
RELEVANCY SCORE 35.6

I've tried many times to install the latest critical BIOS update, using Lenovo System Update, and every time it attempts to, it fails after telling me in a popup that I need to turn the system off and make sure I have a fully charged battery. I rarely rely on battery power and use AC primarily, and I used Power Manager twice to do a full reset, just in case. I can't believe I would need to buy a new battery in order to install it, because the battery works just fine. I'm running Windows 7 (64-bit), and exhausted every other update or option, unless there's something else I'm not aware of. Is it just the software toying with me?

A:[T530] Battery error message won't allow BIOS update in System Update

Hello and welcomeDo not perform the BIOS update from within the TVSU. It's much safer to use CD/DVD and ISO image from the T530 support page.

Read other 1 answers
RELEVANCY SCORE 35.6

Hi everybody

I get windows update error code 2 on installing Security Update for Microsoft .NET Framework 4.5, 4.5.1 and 4.5.2 on Windows 7, Vista, Server 2008, Server 2008 R2 x64 (KB2978128)
I have also some other errors installing Internet Explorer 11.

I have used "sfc /scannow" command but it didn't find any integrity violations. the CBS log is attached.

I have also used SUR and the log file can be found attached to this post.

Any help is appreciated.

A:Windows update error code 2 on installing security update .NETF 4.52

Not as bad as I thought from the file size of the CheckSUR log...


Code:
Summary:
Seconds executed: 626
Found 40 errors
CSI Manifest All Zeros Total count: 40
Unavailable repair files:
winsxs\manifests\amd64_microsoft-windows-ie-ieshims_31bf3856ad364e35_10.2.9200.20916_none_ae6c710c2475d6dd.manifest
winsxs\manifests\amd64_microsoft-windows-ie-ieshims_31bf3856ad364e35_10.2.9200.16798_none_c5578c400ab73d40.manifest
winsxs\manifests\amd64_microsoft-windows-scripting-jscript9_31bf3856ad364e35_10.2.9200.20916_none_ab08cdc647ee4ac0.manifest
winsxs\manifests\amd64_microsoft-windows-ie-extcompat_31bf3856ad364e35_10.2.9200.20916_none_a38eed1960d6da24.manifest
winsxs\manifests\amd64_microsoft-windows-i..ersandsecurityzones_31bf3856ad364e35_10.2.9200.16798_none_32ad7426474825c0.manifest
winsxs\manifests\amd64_microsoft-windows-ie-ratings_31bf3856ad364e35_10.2.9200.16798_none_455c9a9ecd397534.manifest
winsxs\manifests\amd64_microsoft-windows-ieinstal_31bf3856ad364e35_10.2.9200.16798_none_66663569022097ee.manifest
winsxs\manifests\amd64_microsoft-windows-ie-extcompat_31bf3856ad364e35_10.2.9200.16798_none_ba7a084d47184087.manifest
winsxs\manifests\amd64_microsoft-windows-js-debuggeride_31bf3856ad364e35_10.2.9200.16798_none_b8c293a66f3311dc.manifest
winsxs\manifests\amd64_microsoft-windows-ie-runtimeutilities_31bf3856ad364e35_10.2.9200.20916_none_ae82eb7016c1044d.manifest
winsxs\manifests\amd64_microsoft-windows-ie-lowreg_31bf3856ad364e35_10.2.9200.20916_none_0f2b73186e1... Read more

Read other 9 answers
RELEVANCY SCORE 35.6

Error(s) found:
"Code 80070663 windows updater encountered an known error" when I
tried to update microsoft .net framework 3.5 family update (kb959209) x86 for windows vista 32 bit.

What should I do? I have tried to install this update many times but still getting same error. Thanks in advance for help.

Bela

A:error code 80070663 when I tried to update microsoft .net framework 3.5 family update

bela2020:

You didn't say, so I'll ask, have you done the net3.5 Service Pack 1 update?

Read other 15 answers
RELEVANCY SCORE 35.6

Running Windows 7 Home Premium x64
Cannot update, attempting to upgrade to Win 7 professional. Discovered automatic updates were fried for some time and the system did not have SP1, which is apparently required for the upgrade.

I see similar threads, each seems to require advanced individual registry repair so starting my own - if there is a generic fix please reply with it and I can give it a shot. I have tried the normal tools to fix without change- see below.

Symptoms:
Windows updates fails with an error code 8007370B - Windows Update encountered an unknown error

I have run SURT several times successfully
I have run Fixit 50202, MicrosoftFixit.wu.LB.133286320513446086.5.1.Run,
Each returns 'Repair Windows Update components' and 'Windows Update components must be repaired'
All claim to have fixed the problem (no change, naturally)
Attempted to run SFC /scannow from an elevated prompt and it fails with 'Windows Resource Protection could not perform the requested operation'. Same behavior when attempted from Safe Boot.

Downloaded and attempted to install SP1 locally, both the all platforms version and the Win7 x64 version. Both fail with errors.

Ran the Norton remover tool and Macafee remover tool - think Norton came with the system but was never activated, ran the Macafee remover tool just to be sure.

Have renamed the Softwareupdate folder without any change.


Uploaded CBS logs
Download CBS.zip from Sendspace.com - send big files th... Read more

A:Win7 home update fails, error 8007370B - cannot update, install SP1.

See most of the repairs require the components file as well

Download COMPONENTS.zip from Sendspace.com - send big files the easy way

Read other 9 answers
RELEVANCY SCORE 35.6

Hello,

I recieve error C80003FA whenever I do a Windows Update run. It doesn't get past the stage of checking for updates.

I've tried several fixes including:
- Waiting 15 minutes and running Windows Update again.
- Letting Windows Update run on its own schedule.
- SFC /Scannow
- Renaming the Catroot2 Folder.
- Running 3 different Fixit tools.
- Clean windows install.

After each and every one of those fixes I've tried windows update and I still get error C80003FA.

SFC Scannow has previously said no errors, but the last run through it said there were unfixable errors. I've got the log, though for brevity's sake I will keep it until someone asks for it.

Any ideas?

Thanks.

A:Windows Update fails in Update Check. Error code C80003FA.

Clean windows install doesn't fix it? You must be blocked, maybe your firewall???

Read other 9 answers
RELEVANCY SCORE 35.6

Hey,

I'm trying to install update KB976932 (Windows Service pack 1 for 64bit) and KB982526 (Microsoft .NET Framework 3.5 SP1) but I keep getting error 800b100 which stops me from doing so.

I've tried deactivating my firewall; manually installing from the microsoft website; and using the system readiness tool but I keep getting the same error

I've attached log files and I believe some files are corrupt. How can I replace them?
Can anyone please help me out?

Thanks.

A:Windows 7 - Update KB976932 and KB982526 update failure- error 800b100

i am facing the same problem even, tried installing manually, readiness tool and fix it, nothing works. So i just turned off windows update,
windows update Code error 800B100
I amrunning 64 bit windows 7 ultimate

Read other 8 answers
RELEVANCY SCORE 35.6

Hello. It all started couple of days ago when I wansn't able to start my Skype, because at the login window Skype uses Internet Explorer I've been trying couple of days to do something. At first I was getting internet explorer 10 update error, but somehow, magically, that update installed, but now!!! now it says that there's Internet explorer 9 update error! Please help, guys, really frustrated that I can't use skype, I really need it for my work. ty.

I've made logs with System Update Readiness Tool as suggested here Windows Update Posting Instructions, but when I try to attach it, it says




Quote:
CBS.zip:
Your file of 10.84 MB bytes exceeds the forum's limit of 8.30 MB for this filetype.


What should I do? I've tried to zip CBS and to rar it, but the size is still bigger than allowed. HELP!

A:Windows update error 9C48, Internet Explorer update.

I'm thinking my CSB file is bigger than it has to be because I've been running this System Update Readiness Tool couple of times in last few days, maybe I should delete something out of there?

Update: I uploaded it here http://ge.tt/4ab6s9i/v/0, sorry if it's against the forum rulse, or something, will do as it must be done if this isn't appropriate. thx

Read other 9 answers
RELEVANCY SCORE 35.6

Hello,
First, excuse my english, I'm trying my best.

I get error C80003FA whenever I do a Windows Update run.

I did the Windows Update Posting instructions. When I did the SURT installation, it didn't finish and I had to reboot the PC. Then it work.

I've tried sfc /scannow several times before with different results: sometimes finished with no errors, sometimes finish with unfixable errors and sometimes didn't finish at all.

I uploaded the CBS.zip

Hope you can help me, thanks.

A:Windows Update doesn't update. Error code C80003FA

There are no errors in any of the posted logs
Please post the C:\WIndows\windowsupdate.log file.

Please also post the event logs...

Open Event Viewer
click on the Windows logs entry in the left pane to expand it.
Now click on the Application entry - wait while it loads.
Click on 'File' in the menu bar and select Save...

Save the file as Appevt.evtx

Repeat for the System log

then zip both, and upload them.

Read other 9 answers
RELEVANCY SCORE 35.6

Today it was an attempt to update Microsoft Security Essentials. Error code 80070005. Aaaaarrrggghhh

A:Update error 8007005 with microsoft security essentials update

Bardos mate are you the only user ie the administrator? see this windows update error 80070005 < typical of a few Google hits.

This thread too might have been better in the Updates section too mate as therein lie the members who are most likely to help out. But no matter I am sure someone will eventually see it that knows more than I do.

Read other 9 answers
RELEVANCY SCORE 35.6

My Windows Update has been failing to update for a while now and I can't seem to find the solution. Here's the run-down of what happens step by step:Launch an update scan for Windows Update
It scans for a few seconds then says:





Quote:
Install new Windows Update software

To check for updates, you must first install an update for Windows Update.



Once I click Install it begins to "Install and Update," but then immediately returns to "Checking for Updates."
The next box I see says:





Quote:
Windows could not search for new updates

An error occurred while checking
for new updates for your
computer.

Error(s) found:
Code 800F081F


This happens every time I've attempted to update. After looking up the error code, I found the main Windows site that gave me the following explaination:
If you receive Windows Update error 800F081F, it means that Windows Update or Microsoft Update cannot determine the cryptographic service provider, or a file Windows Update requires (named catalog store) is corrupted.

I've looked through multiple Windows forums and How-To's and have tried all the fixes I found. SURT, sfc/ scannow, the standalone download for WU, Windows Update Diagnostic, multiple malware scans, and Microsoft Fixit. Ultimately, I always get the same error code, (800F081F).

I should also say this problem has been here for a few months now, and it's becoming more worrisome as more time passes. The longer I... Read more

A:Windows Update fails to update, error code 800F081F

Hi Mookeylee & welcome to Sevenforums.

Please follow Windows Update Posting Instructions

We need to see the logs to determine the cause of the error.

Worst case scenario, and last resort, repair install windows 7. No big deal I just did 2 yesterday win7x64 Home Premium. Brink posted a great tutorial Repair Install.

Read other 3 answers
RELEVANCY SCORE 35.2

Hi Experts,

After MS Office 2007 update KB2596787 failed I found some HD problems with chkdsk. I believe there are some corrupted system files. I wonder if some kind soul could advise how to repair i.e. which specific files and where to get them from?

Logs/screenshots attached.

Many thanks.

Read other answers
RELEVANCY SCORE 35.2

Greetings,

I am unable to install "Update for Windows 7 for x64-based Systems (KB2761217)" and get "Error Code 8007065E" after the update finishes downloading and attempts to install. See attached for the logs and a screenshot of the error.
Thanks!
Yoha

A:Windows Update Error 8007065E on Update KB2761217

You have some errors in the CheckSUR log which are likely causing your problem - for ease of access, I'll put them here....

Code:
Unavailable repair files:
winsxs\manifests\amd64_microsoft-windows-g..validatefntcache-06_31bf3856ad364e35_6.1.7601.22118_none_a7612cac4a5ea0e2.manifest
winsxs\manifests\amd64_microsoft-windows-g..validatefntcache-06_31bf3856ad364e35_6.1.7600.17130_none_a4d38ecd3432052f.manifest
winsxs\manifests\amd64_microsoft-windows-font-truetype-calibri_31bf3856ad364e35_6.1.7600.17130_none_46cc128a0951a80d.manifest
winsxs\manifests\amd64_microsoft-windows-g..validatefntcache-06_31bf3856ad364e35_6.1.7600.21329_none_a57100044d3f6a3e.manifest
winsxs\manifests\amd64_microsoft-windows-font-truetype-calibri_31bf3856ad364e35_6.1.7601.22118_none_4959b0691f7e43c0.manifest
winsxs\manifests\amd64_microsoft-windows-font-truetype-calibri_31bf3856ad364e35_6.1.7601.17959_none_48a5fc16067ff9cf.manifest
winsxs\manifests\amd64_microsoft-windows-g..validatefntcache-06_31bf3856ad364e35_6.1.7601.17959_none_a6ad7859316056f1.manifest
winsxs\manifests\amd64_microsoft-windows-font-truetype-calibri_31bf3856ad364e35_6.1.7600.21329_none_476983c1225f0d1c.manifest
servicing\packages\Package_1_for_KB2761217~31bf3856ad364e35~amd64~~6.1.1.0.mum
servicing\packages\Package_1_for_KB2761217~31bf3856ad364e35~amd64~~6.1.1.0.mum
servicing\packages\Package_4_for_KB2761217~31bf3856ad364e35~amd64~~6.1.1.0.mum
servicing\packages\Package_4_for_KB2761217~31bf3856ad364e35~amd64~~6.1.1.0.mum... Read more

Read other 9 answers
RELEVANCY SCORE 35.2

Been using Google and such for a couple months messing with it but cant get update to work. My girlfriend updated from Vista a while ago and I cant crack this! I have done all the differect things I could find from Microsoft to no avail. The fixit program finds something and says its fixed but still doesnt work.

Any ideas you all could give would be great! Thanks.

A:Update for Windows Update Error Code 800700B7

Hello bobo and welcome am no expert mate but take a look at this Windows update KB2532531 gets error code 800700B7 - Microsoft Community

Read other 9 answers
RELEVANCY SCORE 35.2

A couple of weeks ago I got error messages from Security Essentials when restarting a PC (Win7/32, SP1). I could not uninstall the program using the Control Panel, so I used the FixIt-utility from Microsoft.
This made things worse.
I am not able to run Windows Update anymore (error code: 80073712 ? Windows could not search for new updates).
There are no system restore dates going back before I started having the problems two weeks ago.
When running sfc /scannow (as admin) I get the following error message:
Windows Resource Protection could not perform the requested operation.
Tried the same function using the Win 7 (SP1) install disk. Get the following error:
There is a system repair pending which requires reboot to complete.
Restarted several times with the same results.
Since SFC was not working I tried to do a repair install. During the compatibility check I got this message:
Windows needs to be restarted so necessary changes to system files can be made before continuing.
I have tried several reboots and also checked for a pending.xml file. Nothing.
Any suggestions/ideas? It is a standard PC I use for Office apps.

A:Update error 80073712, SFC not working, cannot update Win7

Hello asiaviking and welcome to the forums

Command Prompt

Warning: this fix is specific to the user in this thread. No one else should follow these instructions as it may cause more harm than good. If you are after assistance, please start a thread of your own. Click on the Start button and in the search box, type Command Prompt
When you see Command Prompt on the list, right-click on it and select Run as administrator
When command prompt opens, copy and paste the following commands into it, press enter after each

dism /image:C:\ /cleanup-image /revertpendingactions
Right-click on the Command Prompt window and click Select All, this will invert all of the colours by selecting the text, now press enter. All of this text is now copied.
Paste (Ctrl+V) it into your next post please.
Can you also post the requested data please?

Windows Update Posting Instructions

Tom

Read other 6 answers
RELEVANCY SCORE 35.2

HI!
I am getting an update error 80070643 when I am trying to install update KB 2823180. help!

A:win7 32 bit update error 80070643 for update KB 2823180

Hello tbhotica and welcome to the forums

We can't help you without details on your problem: Windows Update Posting Instructions

Tom

Read other 9 answers
RELEVANCY SCORE 35.2

Windows Update was working fine until earlier this month, when it suddenly started displaying the mentioned error code.

Have tried running the FixIt tool from Microsoft to reset Windows Update components, but it cannot repair the Windows Update error.

Tried running SURT, but it gave a message about not being able to install hotfix.

SFC /SCANNOW cannot run.

Attached screenshots and log folder.

A:Windows Update error 8008005 on search and update

Have you tried a start up repair from the install disk?

Read other 9 answers
RELEVANCY SCORE 35.2

I have an Acer Aspire Ethos laptop running Windows 7 Ultimate x64. SP1 is installed according to system properties (came installed).

Windows update was working fine until maybe June or May of this year.

I have tried a number of hotfixes, several microsoft fixit (automatic normal and aggressive runs), the sfc /scannow in admin CMD mode, and also uninstalled the last ten or so updates. I have also deleted the contents of the /Downloaded Installation Files/ within C:/Windows but that also did not fix the error.

Have also tried disabling my antivirus but that did not change anything, windows update will not self-update at all.

Nothing seems to work. Please help.

Below see a typical update attempt from the log (repeats almost every other day more or less the same.






Quote:
2012-08-27 13:31:58:097 1088 162c AU ## START ## AU: Search for updates
2012-08-27 13:31:58:097 1088 162c AU #########
2012-08-27 13:31:58:103 1088 162c AU <<## SUBMITTED ## AU: Search for updates [CallId = {DC5A4D0A-1B62-43F8-ABF1-BED8250E87B9}]
2012-08-27 13:31:58:580 1088 13d0 Agent *************
2012-08-27 13:31:58:580 1088 13d0 Agent ** START ** Agent: Finding updates [CallerId = AutomaticUpdates]
2012-08-27 13:31:58:580 1088 13d0 Agent *********
2012-08-27 13:31:58:580 1088 13d0 Agent * Online = Yes; Ignore download priority = No
2012-08-27 13:31:58:580 1088 13d0 Agent * Criteria = "IsInstalled=0 and DeploymentAction='Installation' or IsPresent=... Read more

A:Windows Update Self-update Fail Error 80073712

agreed. I am facing a similar problem as you. Help

Read other 2 answers
RELEVANCY SCORE 35.2

I'm having a really big problem when trying to update windows through windows update.

I can't install SP1 on my Vista 64bit because when windows update try to install update KB958623, it always show the same error message 8007371C.

I have already tried a lot of things to solve this problem, but nothing works. I'd really appreciate if someone could help me sove the error 8007371C.

Thanks in advance.

A:Error 8007371C when trying to update Vista64 with the update KB958623

1.Check you have in C:\Windows\WinSxS or in subfolders of this folder files Pending.xml, Pending.grl ->if you have these files remove them
2.Navigate to key HKLM\Components and check phrases in these key.You should only have PublisherPolicyChangeTime,StoreArchitecture,StoreFormatVersion ->if you have apart of them any other phrases remove them + restart
3.If nothing help or not concern you try Repair Install
Repair Install For Vista

Read other 1 answers
RELEVANCY SCORE 35.2

Hi,

I am having some issues with my windows update. It will not update at all. I am also unable to update my internet explorer.

Any help is appreciated. Please see attached logs and below code

Thanks

Regards




Code:

Diagnostic Report (1.9.0027.0):
-----------------------------------------
Windows Validation Data-->
Validation Code: 0
Cached Online Validation Code: 0x0
Windows Product Key: *****-*****-*****-*****-FYVQB
Windows Product Key Hash: BiGPTnEmebjLKyvsFO9OMYyy/gc=
Windows Product ID: 55041-008-1336017-86675
Windows Product ID Type: 6
Windows License Type: Volume MAK
Windows OS version: 6.1.7601.2.00010100.1.0.004
ID: {3AD4711B-834B-4D8B-A7D1-D1E6DF23B036}(1)
Is Admin: Yes
TestCab: 0x0
LegitcheckControl ActiveX: N/A, hr = 0x80070002
Signed By: N/A, hr = 0x80070002
Product Name: Windows 7 Enterprise
Architecture: 0x00000000
Build lab: 7601.win7sp1_gdr.111118-2330
TTS Error:
Validation Diagnostic:
Resolution Status: N/A
Vista WgaER Data-->
ThreatID(s): N/A, hr = 0x80070002
Version: N/A, hr = 0x80070002
Windows XP Notifications Data-->
Cached Result: N/A, hr = 0x80070002
File Exists: No
Version: N/A, hr = 0x80070002
WgaTray.exe Signed By: N/A, hr = 0x80070002
WgaLogon.dll Signed By: N/A, hr = 0x80070002
OGA Notifications Data-->
Cached Result: N/A, hr = 0x80070002
Version: 2.0.48.0
OGAExec.exe Signed By: Microsoft
OGAAddin.dll Signed By: Microsoft
OGA Data-->
Office Status: 100 Genuine
Microsoft Office Enterprise 2007 - 100 Genuine
OGA ... Read more

A:Windows Update Issue - Error 80073712 will not update

Hello habeeb786 and welcome to the forums

Could you follow the instructions here please:

Windows Update Posting Instructions

Tom

Read other 5 answers
RELEVANCY SCORE 35.2

Hello this is a strange problem to even describe. I have windows 7 and was updating it, but there seems to have been a problem in the update. Windows will start but even when I enter safe mode the problem remains. The problem is many fold, first writing from the "windows" parts, icons and letters in general don't show. In addition things like the "start menu" don't work. When you right click on something to bring up a menu it warps it into a long rectangle going from the top to the bottom of the screen and shows nothing in it. System restore through the normal means just isn't possible even in safe mode where the problems are the same. Is there some way to restore the system from the bios in windows 7 or some other option?

Read other answers
RELEVANCY SCORE 35.2

Hey all,

I had some maleware on my PC and Bleepingcomputer helped me get rid of it. Since then I have been unable to successfully run Windows update to install update kb2984976 but instead receive code 8024200d.

I have run SURT repeatedly and have just completed running sfc as administrator and it found no problems.

Tried to attach the CBS zip file but received a 500- Internal Server Error.

I would greatly appreciate any help as I am hopelessly lost on this topic.

A:W7 64 bit PC update error 0x800f081f. Update kb2984976 fails

The error uploading the files is almost certainly because the file is too large - remove the older CBSPersist files until the compressed file size is under 8MB and try again.

Read other 3 answers
RELEVANCY SCORE 35.2

Alright, this has been going on for awhile, and now I'm fed up. Every time I want to update windows, it comes up with this error code - 80090305 Every time I try to update windows defender, it comes up with this error code - 0x80090305 I can't update either! I've looked for solutions online -everywhere- nothing works. I checked what the Microsoft website said, but that didn't help either! I really think I should get these updates, and I'm tired of it popping up and telling me that it can't update. The computer is an Acer (I don't know the exact model, I trying to fix my friends computer and I'll be back there tomorrow.) Anyway, help would be amazing. Thank you! p.s I realize this is my first post, but you know I signed up because I really need help! I've tried everything!

A:Update error 80090305 - cannot update windows or defender!

Fix SEC_E_SECPKG_NOT_FOUND Error Under 2 Min - Fix PC Error ?
This is what they say is the fix

Read other 6 answers
RELEVANCY SCORE 35.2

After buying a new hard drive and reimaging thumb drive from Dell, I installed Windows 7 Ultimate on a Dell M6400 Precision Laptop. I have everything working except Windows Update will not Update. It has not updated once since the install. Windows Tech
support has not been able to resolve the issue, even with remote assistance. I get the Error Code 0x80070003 after running the Windows Update Diagnostic Tool. Does anyone know how to fix this?

Read other answers
RELEVANCY SCORE 35.2

Hi there, my Helix laptop (purchased a few years ago) is giving me the "Keyboard Dock Fan Error" at startup. I am then unable to use the keyboard and mouse pad. I previously had this same error a couple of years ago and had solved it using the Firmware update.Now I tried:- BIOS update. Done updated to the latest BIOS version.- Tried doing again the firmware update (although I had done it a couple of years ago) but now I have Windows 10 and the firmware update executable on the Lenovo site says it is for Windows 8 or below. I tried it anyway but it gave an error saying: "This tool and EC firmware mismatch, or communication error is happened.".  Your help is much appreciated.- Najib

Read other answers
RELEVANCY SCORE 35.2

Hello. Been having this update issue and already run SURT, Fixit, and SVC to no avail. Even spent some time on a live chat with a microsoft tech to help me out but his tools couldn't help much. So, I've come here to hope for a miracle.

Here are my log files. The attachment manager isn't working at time of posting so I will attempt to upload the full CBS .zip later.

Read other answers
RELEVANCY SCORE 35.2

I didn't see any posts about this, so I hope I am not double posting.

After removing a drive load of viruses, I am still not able to update Windows Vista to Service Pack 1. I have even tried to create a new admin user account in hopes that this would work, but no go. I tried running sfc.exe / scannow from the CMD and it did report that it was unable to repair wextract.exe. Also, the file reportingevents.txt located in %system root%\windows\softwaredistribution\reportingevents.txt lists "Windows Update Client failed to detect with error 0x80070490".
Although, I think Windows Defender can update. I need to take a break.

Acer Extensa 4620-4605
Windows Vista 32-bit Home Premium

Read other answers