Over 1 million tech questions and answers.

Unknown USB Device (Device Descriptor Request Failed)

Q: Unknown USB Device (Device Descriptor Request Failed)

I know that a similar question has been asked before but, not with the last part of the message, (Device Descriptor Request Failed). I get this, in Device Manager, and I have searched for an answer on the net. Also it is a Code 43. I went through my laptop, with an HP Technician this morning, I might add at a cost of 5p/minute, for 30 odd minutes. He has said that because I had gone over to Windows 8.1 and the recovery discs I made will not load, to put back in Windows 8. I have to send the laptop back for re-installing the OS, because Windows 8.1 do not have the update for my problem. Also the R.H. USB socket has a failure ID:0GAPTK-6T7716-MFPWWK-8D1Q03. I personally think that this is all what the problem is. a duff USB. Is this a cop-out???
My question is; has anyone heard of Windows 8.1 having driver WHQL problems?? Very.

Any/all ideas, appreciated.

ps, I only found out the problem with the usb when I tried to download a Mobi file to a Kindle for my wife. The other usb's work OK.

RELEVANCY SCORE 200
Preferred Solution: Unknown USB Device (Device Descriptor Request Failed)

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: Unknown USB Device (Device Descriptor Request Failed)

Is there only one USB port on the right hand side? Sometimes manufacturers connect internal devices via an unused USB port internally. USB ports are usually in groups of two, seeing only one port is usually a sign that the wiring has been redirected internally to something else like a Bluetooth adapter or wifi adapter. It may even be a card reader or touchpad. Is anything like that not working? If it is start looking for a driver for it.

Read other 19 answers
RELEVANCY SCORE 165.2

I upgraded to Windows 10 a while back. Every time I open the computer I get a pop-up notification telling me the USB device is unrecognized. I have no USB devices in any of my 3 USB ports.
I sent my computer in twice. No help. They just uninstalled everything and reinstalled everything and told me it should be fixed. It is not. I then went about updating every driver in my Device Manager. I uninstalled the Unknown USB Device and then updated
other drivers. Certain drivers (such as PCI Express Root Port #3 - 9C14) when updating would also reinstall the Unknown USB Device, which I would then uninstall and keep working down the list. At the end of updating EVERYTHING I scanned for hardware changes
and "found" the Unknown USB Device. 
From what I can tell, and I know very little about this stuff, my computer can't name one of my USB ports. Since it can't figure out what it's called it can't download the proper driver for it. Since it can't download the proper driver it can't work properly.
The practical result from this is that one of my three USB ports does nothing when I put in any USB item (connect my android phone, thumb drive, presentation clicker, etc).
I've looked on tons of forums. My current thought is that if I can tell my computer what the deice is or download the right driver and tell my computer to use that driver for this device it should solve my issue. But I don't know how to know what the name
of the USB port should be (I imagine it woul... Read more

Read other answers
RELEVANCY SCORE 158

I was just working happily when my Microsoft Bluetooth Mouse just suddenly stopped working.
The Bluetooth settings page says "Bluetooth is turned off" and there are no options on the settings page or the system tray to turn Bluetooth on.
The Device Manager now has "Unknown USB device - device descriptor request failed" where it did not before.
Other devices all seem to be working fine - USB devices plugged in are being recognized and work properly. Only BT seems to be broken.
I've tried:
uninstalling the device and rebooting
installing the latest updated chipset drivers from the dell website
windows updates
pretty much all of the advice here: http ://troubleshooter.xyz/wiki/fix-usb-device-not-recognized-device-descriptor-request-failed

Any other ideas?
Thanks

A:XPS 15 9550 Bluetooth stopped working (Unknown USB device - device descriptor request failed)

So in desperation I just went into BIOS settings to see if there are any BT settings that may have become disabled. I didn't see any, and I didn't change any other settings.
After rebooting, BT and my mouse is now working again.
Something seems to be really flaky here, but hopefully this will help others with the same issue.

Read other 1 answers
RELEVANCY SCORE 157.6

I plugged my android device to my PC by usb ..it is saying USB device not recognized. Please help me.

Read other answers
RELEVANCY SCORE 156

Can any help with this problem? Have a Pavilion G6 with no USB 3.0 as I am aware. USB (3 ports) not working.However, when the plugged the mobile, the mobile does get charged. Device Manager shows "Unknown USB Device (Device Descriptor Request Failed)".   Running Windows 10 64 bit. Tried everything like uninstalling, updating etc as the information on the internet. Also, updated the drivers using Driver Easy but still getting the error. Any suggests, please? Thanks in advance. Sanil Sukumaran.

Read other answers
RELEVANCY SCORE 156

Turned on phone and said to plug into computer with USB and open Hisuite.  Is it an app that i can download and also how do i get the computer to recognize the phone?

Read other answers
RELEVANCY SCORE 156

My computer keeps telling me Unknown USB Device (Device Descriptor Request Failed), so I looked up how to fix it and they told me to uninstall it then scan for hardware changes and it will reappear working properly. Only it did not come back working properly, it came back the same. I am also 98% sure that this "unknown USB device" is my built-in webcam that has never once worked. So if someone wants to help me out and allow me to use my webcam that would be great!

A:Unknown USB Device (Device Descriptor Request Failed)

Hi there, can you first tell us what is the Name and Model number of your system?

What OS are you running

im sorry if you already listed this, as I cannot see your specs from the Windows Forum App..

I take it this is a laptop?

Read other 13 answers
RELEVANCY SCORE 156

After installing Windows 10 anniversary update, I get the following error in the device manger: Unknown USB Device (Device Descriptor Request Failed)

Tried uninstalling and restarting PC. Reinstalled Windows made from media tool. Nothing fixed it. Did a google search and nothing has worked. No USB drivers on the PC maker's website.

Any ideas?

A:Unknown USB Device (Device Descriptor Request Failed)

You can try going into device manager > select show hidden devices and delete all "inactive" usb device appearances. In my example below, there would be four. Once done, reboot and try your device again:

Read other 6 answers
RELEVANCY SCORE 156

I have bought a new windows 8.1 Toshiba laptop when I connect my external hard drive witch was working ok before it's telling me - unknown usb device (device descriptor request failed) code 43

A:unknown usb device (device descriptor request failed)

did you try to go to power manager, shut off usb power saving

Read other 17 answers
RELEVANCY SCORE 156

Fresh install of Windows 10 and the last driver I need to sort out is the above.

I believe it is my powered USB 3 hub to which I plug in my keyboard and mouse. Technically it is working but I don't like seeing yellow triangles on devices.

So are there any fixes?

A:Unknown USB Device (device descriptor request failed)

If it's a generic USB 2.0 Powered Hub then technically there's should be no drivers needed by Windows, if it's a USB 3.0 Hub then I'm unsure (since I don't own any USB 3.0 Hubs).

Might be a Windows bug, basically Windows can't find the description information to display the Hub's name in the Device Manager example: Generic USB Hub, Root Hub Device, etc....

I'm pretty sure everything is working as should, you're good minus the minor annoyance if all device connected through the USB Hub is recognized by Windows; if you right click Properties on the yellow triangle it probably says "The Device is working properly".

Read other 6 answers
RELEVANCY SCORE 156

I HAVE TRIED THE WAY THAT HAS BIN SUGGESTION WITH NO LUCK
\_SB.PCI0.OHC1.RHUB.PRT2- BIOS DEVICE NAME
PROVIDER-MICROSOFT
IF YOU NEED MORE INF JUST ASK
PLEASE HELP

Read other answers
RELEVANCY SCORE 156

Hey
1.)So my mouse(Corsair Harpoon RGB) was recently just working fine until one night i unplugged it and put it into computer and on that computer it didnt work so i went back to my laptop to plug it in there, but it showed the same problem it didnt respond the logo didn't light up so i went to the device manager and it said *title. So how do i fix this is there something with my mouse is there something with my software?
Oh yea and on top of that i have 2 more issues that i jut can't solve by myself.

2.) Unknown USB-device(port reset failed)
3.)DVD Drive(optical drive) doesnt show up on the device manager but it sounds like it's working and it opens and closes.
4.)Front ports of my PC doesnt work if i plug an USB in it doesnt do anything (it does work perfectly in the back)

I don't know though if i should make more threads but they somewhat relate to each other,
that's why they are just in 1 thread. If you need to ask any question, need pictures , my specifications or anything else just ask me.
Thanks in advance!
Best regards Hao.
 

Read other answers
RELEVANCY SCORE 156

I have had the Microsoft Wireless 2000 Keyboard and mouse for 10 months and it has been working fine. But recently when I plugged it in I got an error message which said :The last USB Device you connected to this computer malfunctioned. and Windows does
not recognize it.
I opened Devices and Printers and it said Unknown USB Device (Device Descriptor Request Failed).

Also it is on Windows 10 Home

Read other answers
RELEVANCY SCORE 156

Hello,  I seem to be having an issue with my Thinkpad T470p. I've had it for about a year and a few months ago, all the 3 USB ports stopped working and so did the integrated camera. It would work at times and then stop working. For the past 2 weeks, everything has completely failed. So far I've done the following: -I've reset the BIOS to default settings and still there is no change.-The USB ports are enabled in BIOS settings as well. -Fast startup is diabled-The autosuspend for USB devices has been disabled in the power settings as well-All drivers have been updated using the Lenovo System Updates-This is a fresh install of Windows 10 so there is no previous state that I can go back to. (It wasn't working when I was running Ubuntu either even with all the right drivers installed.)-Troubleshooting cannot seem to find a fix for the error either One weird thing though is that my WD Elemnts HDD works fine when plugged in to any of the USB ports but other than that nothing else works. Any and all help will be much appreciated. My warranty expired just before these issues started so I don't really think I can get it repaired by Lenovo services.

Read other answers
RELEVANCY SCORE 156

Im running windows 10 on an HP laptop, 64 bit, and i just got a micro usb to usb device so i can transfer stuff onto my phone. It worked when i first got it but now it comes up with a Device Descriptor Request Failed and a Code 43 error. Ive tried updating
the drivers, restarting my laptop, and plugging it into different usb ports but it still comes up with the error. Any suggestions? 

Read other answers
RELEVANCY SCORE 148

I'm experiencing slim keyboard not being recognized in the Windows 8.1
The keyboard was working fine until just one day it just stopped working.
I tried factory reset literally 8 times along with most recent BIOS update and dell's recommended update software. + power setting --> disabling power saving on USB
It still come up as unrecognized each time even with fresh reinstall.
I was wondering if this is a hardware issue or just software bug from factory reset.
I don't think there is a available driver for this kind of problem is there?

Log Name:      Microsoft-Windows-Kernel-PnP/ConfigurationSource:        Microsoft-Windows-Kernel-PnPDate:          8/6/2016 1:09:35 PMEvent ID:      411Task Category: NoneLevel:         ErrorKeywords:      User:          SYSTEMComputer:      DellDescription:Device USB\VID_0000&PID_0002\5&1347b1a9&0&4 had a problem starting.
Driver Name: usb.infClass Guid: {36fc9e60-c465-11cf-8056-444553540000}Service: Lower Filters: Upper Filters: Problem: 0x2BStatus: 0x0
 

Read other answers
RELEVANCY SCORE 138.4

hey, im having problems with plugging in my mouse to any USB port, this just started around an hour ago. ive checked on the brand's website which carried no complaints on problems like this with the same mouse. tried pretty much everything, even looking
it up on youtube and forums... Nothing has worked, worser still, i got it for christmas and its stopped working, ive looked though the device manager too. Please try and help me, if u can. I use Razer Naga Waith Red if that helps

thanks,
onyx

A:Windows has stopped this device because it has reported problems. (Code 43) A request for the USB device descriptor failed.

Hi onyx,
This error means a device driver notified the operating system that the device failed. This circumstance can occur if the device hardware fails or if the device driver fails.
Have you tried to update the device driver for test?
Please follow this guide trying t resolve this issue:
Code 43: Windows has stopped this device because it has reported problems
http://technet.microsoft.com/en-us/library/cc725873(v=ws.10).aspxKaren Hu
TechNet Community Support

Read other 2 answers
RELEVANCY SCORE 138

Hello, ok so after recently doing a clean install of windows 10(please don't get me started on that mess). my system has been plagued by random usb drops. it's where everything connected via USB suddenly disconnects then reconnects out of the blue. well I was using a Rosewill Transenclosure RX200R-APU-25B USB 3.0 dual 2.5 hard drive enclosure and transferring files from one drive to another (connected via USB) when one of these drops occurred. Now whenever I plug in my hard drive enclosure in a windows warning pops up and says "the USB drive that was just connected Malfunctioned and could not be installed" and in system manager it says "Unknown USB device (device descriptor request failed)". I know it's not the hard drives because I can remove them and use another connection and they work fine, all files intact. It's just now my hard drive enclosure won't recognize. This also happened to a "Loot crate exclusive Game of Thrones stark sigil 4GB USB stick I plugged in and turned into a windows 10 install drive. When I plugged it into use it after the windows media creator said it was done the USB stick was raw and unformatable. Please help. Microsoft keeps telling me it's a hardware issue even though it happened on two different systems. both operating windows 10 never any issue with windows 7 or 8.1

Dell N7110
i5-2450M about to upgraded to an i7-2820 if I can get this USB issue under contol
16GB Samsung DDR3 Ram
3-750GB HDD, 250GB HDD
EVGA GTX 1... Read more

A:Unkown USB device (device descriptor request failed) after disconnect

The driver could have been corrupted please re install the drivers for dell. Hope this helps

Read other 1 answers
RELEVANCY SCORE 130.4

i have acer e1-571 notebook.running windows 10.from last few days my pc giving this error-Currently, this hardware device is not connected to the computer. (Code 45)

To fix this problem, reconnect this hardware device to the computer.

A request for the USB device descriptor failed.                                                            
                                                                i have tried all kind of suggestions
given by microsoft related this problem .but   cant solved.card reader ,pen drive ,external keyboard ,or external mouse no one working.2.some  random  keys  is not working .please fix my issue .

Read other answers
RELEVANCY SCORE 129.2

Let me start out by saying that I've googled the shit out of this problem, tried several things, and nothing worked.

I have a D-Link USB 2.0 Hub that I got about a week ago. It's been working awesome up until recently. It's a plug and play device, however windows is failing to recognize it, and thus making everything I have plugged into it unusable.

In the 'Device Status' box it says:

Code:
Windows has stopped this device because it has reported problems.
(Code 43)A request for the USB device descriptor failed.

And in the 'Events' tab, there's a few listed, I'm not sure if they are much help:


Code:
Device not migrated

Device USB\VID_0000&PID_0002\6&1330e4d7&0&3 could not be migrated.
Last Device Instance Id: USB\VID_0000&PID_0001\6&3AE11B61&0&1
Class Guid: {36FC9E60-C465-11CF-8056-444553540000}
Location Path:
Migration Rank: 0xF000FFFFFFFFF100
Present: falseStatus: 0xC0000719


Code:
Device configured (usb.inf)

Device USB\VID_0000&PID_0002\6&1330e4d7&0&3 was configured.
Driver Name: usb.inf
Class Guid: {36FC9E60-C465-11CF-8056-444553540000}Driver Date: 06/21/2006
Driver Version: 10.0.14393.0
Driver Provider: MicrosoftDriver
Section: BADDEVICE.Dev.NTDriver Rank: 0xFF0000Matching
Device Id: USB\DEVICE_DESCRIPTOR_FAILUREOutranked
Drivers: usb.inf:USB\DEVICE_DESCRIPTOR_FAILURE:00FF2000
Device Updated: falseParent
Device: USB\ROOT_HUB30\5&35f8b9e6&0&0


Code:
Device not started

Devic... Read more

Read other answers
RELEVANCY SCORE 128

I have a flash drive that I previously used in public computer lab (where many viruses linger) the other day to do my work. As I got home, the flash drive isn't working anymore, saying "USB Device not Recognized". I also noticed that it really took me a while to finally, safely remove it from the computer lab's PC. So I actually wonder if it actually removed my flash drive properly.

On Device Manager, it says "Unknown USB Device (Device Descriptor Request Failed)".
On the Properties, the device status says "Windows has stopped this device because it has reported problems. (Code 43) -- A request for the USB device descriptor failed."

My flash drive is a Kingston Flash Drive DataTraveler (DT100) 16GB, and my PC is running on Windows 8.1.

Things I have tried:
- Shut down my PC, unplugged power and removed battery, waited for a while, booted my PC and try plugging in again.
- On Device Manager, uninstalled it and scanned for hardware changes, it still returns as "Unknown USB Device".
- On Device Manager, I clicked "Update Driver Software..." and it returns me a message saying "The best driver software for your device is already installed".
- Unfortunately, when I visited Kingston's website to check if there is driver for this specific flash drive, there isn't any... "There are no downloads or drivers available for this product".
- Used Windows 8's Troubleshooting tool. It only detected my problem, but was un... Read more

A:USB not recognized (Device Descriptor Request Failed)

if you have tried on other systems using different OS then the error is normally because of issues with the item not the PC , it might be 'confused' or have corrupted data or be faulty.

If you have the data still stored elsewhere...then you may be able to reset the flash drive and see if it recognises it then.

I'm not sure if there is a reset switch anywhere on that stick.

Read other 5 answers
RELEVANCY SCORE 128

having trouble installing an Epson WF-2530 printer onto win 8.1 machines.
i have 3 win 8.1/64 bit machines. it will install and is working on only one.
used the same installation disc, and install process, and cables with all 3 machines.
googling the problem shows plenty of stuff mainly updating drivers. done that, still no good.
Not sure why it works on only one, a generic clevo laptop w550eu.
thoughts???
the installation process stumbles when it asks you to connect the printer cable to the computer.

Read other answers
RELEVANCY SCORE 128

Hi all,

(Unknown USB Device - A request for the USB device descriptor failed)

Massive problem I have encountered since buying a new laptop pre-installed with Windows 8.1

I have 3 external USB storage devices - 1x Corsair "Slider" 64GB, 1x HiTachi Touro 750GB, & 1x HiTachi 4TB external drive. ALL drives are coming up with the same error message and are not being recognized by Windows 8.1

The strange thing is, I also have another 2 PCs - one with Win7 and one with WinXP and the drives work without issue.

I've spent the last 4 days scouring the net looking for answers, and thus I am here hoping someone can shed some light as to why ALL of these drives do not work on this new laptop pre-installed with Windows 8.1?

Even stranger still is I have other thumb drives, a cheap Transcend 32GB (which is USB3.0) and a few cheapo (USB2.0) drives of various sizes by Strontium, Lexar and so on which work perfectly.

But the one that has me o.O is an expensive 64GB thumb drive called the Mach Extreme which also works perfectly with this laptop???

So all up 2x HiTachi drives & 1x Corsair thumb drive are not working and its driving me bonkers!

If no drives worked at all, then I would be seeking the manufacturer for maybe a faulty component. Dodgy USB ports, or maybe a motherboard problem. But having a handfull of drives, of various makes, sizes and both USB3.0 - 2.0 fully working leaves me scratching the old chrome dome as to what could be the issue

Would really real... Read more

A:A request for the USB device descriptor failed. (error43)

You can mark this thread as SOLVED!

Okay here's the fix that worked for me, maybe it will work for you.

I've always updated drivers, WinXP, Win7 and so on, the same way - download the driver, go into device manager and select browse, then point windows to the downloaded driver to update the necessary files. Its always worked that way for me for as long as I can remember.

Not so it appears with windows 8 - for some strang reason.

For me I had to update to the latest Intel Chipset Drivers, but instead of the tried and trusted methos above, you simply hit the setup.exe and let windows 8 do its thing. Believe it or not, but this fixed the issue.

Yes I had already updatd to the latest Intel Chipset Drivers using the device manager method, and yes windows "did" update ...someting??? But the USB devices were still showing the Unknown USB Device error. But using the setup.exe fixed the everything and all my USB devices are now working perfectly with Windows 8.

How, why, who knows, but I hope this works for others with the same problem.

Read other 2 answers
RELEVANCY SCORE 128

Was trying to plug my Toshiba 1tb External hard drive in to retrieve music off it and it wont recognize the drive. Device manager revealed the yellow triangle and error message. It works on my wifes hp streambook and also my kids stream book both are running wondows 10 like mine. I have tried nearly 10 different suggestions from google searches and have gotten nowhere. The only thing I couldnt try was turning off the usb in the power options, for some reason mine doesnt display that option. My notebook only has 1 usb port so I cant try a different port. Any suggestions or fixes?

Read other answers
RELEVANCY SCORE 126.4

Hello, The left USB socket on my X250 has started to return the message Device Descriptor Request Failed, but the right hand USB works as normal. I rarely used the left hand one so I am unsure for how long this has been the case, but now I am very keen to start using a USB keyboard so I am very keen to get it working again.I have tried uninstalling the device and reinstalling, and searching for new drivers.Thanks in advance for any help,Dave

Read other answers
RELEVANCY SCORE 126.4

Hello Ladies & Gents.

I would like to ask for your assistance on this slightly annoying problem.

I have 1 pair of Razer Megalodon USB headphones, on the start up of Windows 8.1 these headphones are not detected correctly. The only proof I have of this is in the device manager displays:

Universal Serial Bus Controllers -
Unknown USB Device (Device Descriptor Request Failed).

(Please see attached screenshots)

Once the device is disconnected and reconnected device manager then displays:

Universal Serial Bus Controllers -
USB Composite Device

The device then shows in "Audio inputs and outputs"

Cheers,

Mr Collective

Attachment 38815

A:Razer Megalodon - (Device Descriptor Request Failed)

Razer is well known for BSOD drivers and problems, otherwise. (And taking very old drivers, changing nothing at all, giving it a new date and then claiming "Compatible!" with new OS.)

Perhaps give a shot with uninstalling their software, rebooting, the re-installing.

Make sure using the latest.

When all is said and done, you might just have to live with it.

Can't hurt to make sure chipset drivers are up to date. If Intel chipset, search their driver site for "Inf"

Read other 2 answers
RELEVANCY SCORE 126.4

hello guys in my device manager there is a yellow triangle on a usb device driver saying : a request for device descriptor request failed first i thought maybe 1 of my us ports not working but when i tested all ports are working even card reader but the error is still there i updated drivers (chipset - etc) but it didnt help so i want to know how to get rid of that error and what is the problem with my laptop?
note: sometimes when i trun on my laptop that error is gone mysteriously and most of the times its showing up
note: i recently changed my wireless adapter tho the orginial adapter was a bt/wifi combo but the new one is just a wifi adapter and i have an ssd installed instead of dvd optical drive and both are working well
note: things i already tried: disabling fast boot-updating generic usb drivers-taking out battery for 5 minutes-updating drivers

Read other answers
RELEVANCY SCORE 121.2

Greetings folks

I have a problem that bugs me for years, I never intentionally solved it, sometimes those errors disappears and all USB ports work fine, sometimes they do not. So anyone can help me please, it would be great.

Some of my ports do not work all the time, I cannot identify a specific moment. Inside the Device Manager, Universal Serial Bus controllers, I get 1, 2 or more "Unknown USB Device ( Device Descriptior Request Failed )", sometimes more sometimes less.

CPU: Intel Core i7 3770
Motherboard: AsROCK H77 Pro4/MVP
Windows 10 all available updates downloaded and installed as of today, and everyday. The problem appeared on Win 8 or 7, not sure when. So it's not necessarily Windows 10 specific. I ported it to 10.
Here is what they look like:
http://prntscr.com/d6rm6k

Bios is up to date. Chipset drivers updated, various solution tried from googling, I even managed to make all USB ports stop working testing some of these solutions, I had to restore windows from a ghost image I had.

It's like these USB ports remain suspended sometimes.

Any advice on what to try? The most annoying part is that from the frontal USB ports some stop working randomly too.

Thank you

Read other answers
RELEVANCY SCORE 121.2

hello    i'm an embedded developer. i have an usb type ic programmer to burn microcontroller. now i'm getting this error "Unknown USB Device(Device Descripter Request Failed)" while plug my usb programmer into my pc socket. but this same hardware support in my friend same hp430 pc.

Read other answers
RELEVANCY SCORE 117.6

Hello everyone,
i hope you can help me sorting out this issue that is causing me a hard headache at the moment.

I've bought this new Lenovo Z50-70 laptop with windows 8.1 preinstalled on it. Fresh new.

I'm trying to connect via usb a guitar audio interface (Line6 POD HD500) so i installed the drivers via the .exe setup file i downloaded from Line6's site.
The device worked fine on my previous HP pavilion with windows 7.

Now when i completed the installation, i connected it and i had this error:Windows has stopped this device because it has reported problems. (Code 43)A request for the USB device descriptor failed.
I used slimdrivers to update all the other drivers, in case it was a conflict causing the error.
I checked via command prompt with command "pnputil -e" and i saw a driver from the vendor of the device listed, so it is installed correctly i think.
I tried all USB ports i have, 3.0 and 2.0 on one side of laptop and 2.0 on other side.

When on device manager, if i click update drivers and choose the "let me pick from a list of device drivers.." i don't see the company name of the device.

i saw that another guy posted a really similar problem on SevenForum and he figured out how to force windows to use the drivers but he didn't post the solution.. Here is the post: Can't get Windows 7 x64 to use the drivers I've installed repeatedly Solved - Windows 7 Help Forums

Edit: the software tool from which i can update drivers and other things for my g... Read more

A:USB device not recognized. Device descriptor request faile

I am having the same exact problem as you, Cattanius. I couldn't get it to connect to my computer over 2 years ago and then just decided to try it the other day. I didn't expect anything to show up in device manager because I thought the usb port was fubar, but then I see the same message you got and all of the sudden there's hope! I hope.

Read other 1 answers
RELEVANCY SCORE 106.4

After installing window on my laptop (Lenovo Ideapad 100) found out that the USB port are not working although if i plug in a phone it indictaed charging and i plug in my hard drive it shows the led light but the USB cant read any device not even a USB mouse works on the system . Please kindly help me with this error. 

























Screenshot (6).png ?101 KB

Read other answers
RELEVANCY SCORE 103.6

Most of the threads on this error are old, (2015) so I am starting a new one. I only notice it when I happen to be in the device manager. I have no problems with any of my connected USB devices (that I have observed).

I have tried uninstalling it, and rescanning and it pops up again, so apparently it is something that is connected. Without disconnecting All of my USB devices one at a time (which I am wont to do, as it is not bothering me, other than that it is there!) It has been there for quite a while, so apparently is not anything new being connected.

Is there no way to identify WHAT is connected to this port, or even what port it is?

BTW, it only shows up in the USB Controller section, no matching errors in any of the devices themselves!

Curiouser and curiouser...

Read other answers
RELEVANCY SCORE 101.6

Windows 10 Home

Hi, I just bought a new HDD today and freshly installed windows 10 and have ran into this problem: when I plug in my wireless XEOX Pro Analog Gamepad from Speedlink I get the "Unknown USB Device (Invalid Configuration Descriptor)" error. I'm adding the screenshots.

This device worked perfectly on windows 7 yesterday, so the controller definitely isn't damaged physically and it does work on a different PC(windows 7).

Read other answers
RELEVANCY SCORE 101.2

I have two WD "My Book" 3.0 USB drives.  Previously, they both worked fine.  Now one of the two drives is getting a device descriptor request failed message.  The other drive is fine.  I have tried different 3.0 inputs on the system both in back and on top in the front.  Any ideas on why the same drive isn't working?  I have tried both on other systems and they work fine.  The other systems I have tried them on are WIN7 and WIN 8.1.











Solved!
View Solution.

A:usb 3.0 drives getting device descriptor failed error

Hi there slovey  Have you, by any chance tried with another USB cable? I wouldn't make sense to change things as the device works on other systems but it wouldn't hurt to use the other My Book's cable with the problematic one just to rule this out as a potential cause. I would also check this thread and see if the offered solutions there help.  Keeping your OS, BIOS and drivers up to date is also an important part of the troubleshooting process. I'd also check if there's a new update specifically for the driver responsible for the communication between the drive and the system. Post back if you need more info! Captain_WD.

Read other 4 answers
RELEVANCY SCORE 100

I have an external Bluray/DVD drive (ODP1201=S3-B) that works perfectly on Windows 7 but is not recognised by my new laptop which has Windows 8.1 64 bit. Can anybody explain why this is and what I do to get pass it, or is this a problem with Windows 8.1?

The device is listed in Win 7 as "hp bd rom bc 5501h", and the driver is 6.1.7601.17514

I have now tried various USB devices; I have connected a USB 2.0 External Hard Drive and a USB 2.0 Canon Camera both of which work OK, I have also connected a Seagate 1T external drive which is USB 3.0 an that was OK as well (the ports are all USB 3.0 on the laptop hence the reference to the which USB type)

The error message is as follows: "USB Device Not Recognised", When I go in to Device Manager I find two USB error listings, Unknown USB Devise (Device Descriptor Request failed) & Unknown USB Devise (Port Reset Failed)

I have been advised that this error can arise when a drive doesn't receive enough power from the system. The device does have two USB connectors, I have tried using both of them. The power cable going to the powered USB on the laptop and the data going to the adjacent USB (there are a pair of USB sockets on either side of the laptop, the right hand side having the only powered socket).

A:Unknown USB Device - A request for the USB device descript

I'm too of opinion that it's a power issue. Laptops are not known to have much power thru USB ports, not even some desktops for that matter. Possible solutions: If that laptop has USB3 port you can try it in there, it gives more power and is compatible with USB2. Another one is to ad external power to the drive. One of the USB connectors on the twin cable has only two connection tabs and is for extra power to device. That one can be connected to universal USB charger for phones etc. That's how I solved a problem with a HDD in external enclosure.

Read other 8 answers
RELEVANCY SCORE 88.4

Hey guys... I am about ready to pull what hair I have left out of my head. Here is my setup:

-MSI X99A Pro Carbon motherboard
-Intel Core i7 6800K prcessor w/Cooler Master Hyper Evo 212 cooler
-32 gigs of DDR 4 Quad Channel ram
-Windows 10 Pro
-One SSD 250GB Intel drive for OS
-5 internal HDDs for storage - All Sata connected
-Corsair Graphite 760T case.

I do not over clock. I have the ram overclocked in the BIOS using XMP to 3000 speed, but that's it.

Here is my situation, and I am baffled and feel super deflated over this mess as I run a small project studio for video and audio work and this is causing me to fall behind on projects.

I am getting constant on screen pop up notifications that a recent USB device isn't recognizable or 'has malfunctioned and windows doesn't recognize it' along with constant USB connect/disconnect sounds. I just built this custom PC this past week and everything seemed fine for a couple days, and then this started.

When it does this, I go into device manager, and I get a yellow exclamation mark under the USB list that says 'Unknown USB Device (Device Descriptor Request Failed). I have hit google search and tried every single suggestion I could find including the following:

-Blowing all the dust out of all the ports, although i doubt that was an issue because the case and motherboard are brand new.

-Going into device manager, and disabling or uninstalling the device that is giving the error. It pops right back ... Read more

A:USB Device Descrptior Request Failed Issue. PLEASE HELP!!!

Read other 13 answers
RELEVANCY SCORE 87.2

I had my Samsung Core Prime plugged in via usb, I'm guessing I pulled it out without ejecting, as now whenever i plug it in, gives Drive descriptor request failed. It's not the port or the cord as the phone's charging perfectly fine. I've restarted both devices multiple times, uninstalled the usb drivers, and a bunch more. Any suggestions?

Read other answers
RELEVANCY SCORE 86.8

Hi,

I have a problem on my MI Notebook Pro device.
Reasons for failed automatic device encryption: Hardware Security Test Interface failed and device is not InstantGo. Any solution available?

Looking forward to your support.

Thanks,

Mahmudur

Read other answers
RELEVANCY SCORE 84.4

I have a Kingston HyperX 64Gb memory stick, formatted FAT32, that Win8.1 doesn't recognize. I plug in the memory stick to any USB 3 or 2 port on a Dell XPS15-9530 and Win8.1 appears to recognize it, assigns a drive letter then immediately says "unknown
USB device (set address failed)". The memory stick works OK in two other Win7 machines. Interestingly, yesterday, Win8.1 was saying that the USB device was unknown because Device Descriptor Request Failed but that has now changed to Set Address Failed.
BIOS is up to date. All updates to Win8.1 have been applied. Kingston have no drivers for this device. I've tried setting USB power setting "Selective Suspend Setting, both battery and plugged in, to disabled and it makes no difference. I've removed
the device in "devices and printers" and then rescanned in device manager with no success. Is there anything further I can do?

Read other answers
RELEVANCY SCORE 83.6

windows 10 user , my usb ports are working fine but when i insert a usb , it doesnt read , when i go to my device manager it says that it has stopped because of code 43 , i tried installing and re installin , enabling and disabling but nothing is changing , please help? i dont know what to do anymore

Read other answers
RELEVANCY SCORE 83.6

I have tried a few different windows images, windows troubleshooting feature, and the latest versions of the drivers.
I've tried uninstalling and reinstalling drivers, disabling and re-enabling, re-imaging, updating windows. None have had the effect of actually making it work. I'm running win 10.0.10240, on dell latitude 5285 and 5289. This is affecting the entire Intel Integrated Sensor Solution Driver and all the included sensors, compass, accelerometer, gyroscope GPS and ambient light.

hardware id: HID\Vid_8087&Pid_0AC2
I would like to resolve this so that we can order tablets and have them work right in our org.

Read other answers
RELEVANCY SCORE 79.6

hie i have just installed window 7 and this devices are missing, any help will be very much appreciated.
base system device
device id
PCI\VEN_1217&DEV_7110&SUBSYS_117C10&PEV_00
PCI\VEN_1217&DEV_7110&SUBSYS_117C10CF
PCI\VEN_1217&DEV_7110&CC_088000
PCI\VEN_1217&DEV_7110&CC_0880

UNKNOWN DEVICE
LOCATION; INTEL(R) 82801 DBM LPC INTERFACE CONTROLLER-24CC
HARDWARE ID;
ACP1\FUJO2BI
FUJO2BI

VIDEO CONTROLLER
LOCATION; PCI bus 0 device 2 function 1
HARDWARE ID
PCI\VEN 8086&DEV_3582&SUBSYS_120E10CF&REV_02
My laptop is FUJITSU-BIBLO MG13D

A:base system device, video controller and unknown device missing

Before I can help you, follow these instructions to let me know more about it: New to SevenForums? Fill out your system specs (this tool may help you out a great deal).

Read other 4 answers
RELEVANCY SCORE 79.6

hello all. i dont come around to this site very often but i desperately need you guys help.

im trying to get a gamebridge i purchased a few days ago to work. the first day i had everything going according to plan and had it installed on there and everything, but then i was having problems with it... it wouldnt show my game screen. so i decided to install to a new usb drive.

i took the device out and tried to reinstall to another drive but it didnt work... and now when i try to put it back into the original drive it gave me an error. so i went into device manager and unistall the device manually from the original drive.

but now i try to install it again to any drive it give me the code 28 error...
someone please help me i really need to fix this problem.

thanks in advance!!!!!!!!!!!!!!!!!!
 

A:USB drive not properly installing device(GAMEBRIDGE). (unknown device code 28)

Read other 8 answers
RELEVANCY SCORE 79.6

Note: Device manager lists appropriate bluetooth antennae.  Some items are still showing up ok, but many (some new, some previously paired) are listed as unknown now, so they are useless to me until this is resolved.  This is a fairly new Flex5 (bought at Microcenter about a month ago).I ran the Lenovo "Vantage" program to get the latest bluetooth drivers on board.Tried uninstalling BT driver and running manual install of intel and Qualcomm drivers.  Windows10 is not seeing the Intel ones, I think as when I try to change the driver to the intel ones I only see the the QualcommAtheros and the generic bluetooth drivers available.  I ran that installation a number of times, but havn't been able to try the Intel drivers yet.  I'm not sure if they will fix the problem, but would like to try them, unless someone here can point me at something else that may be the cause.  Thanks for any info! 

Read other answers
RELEVANCY SCORE 79.6

I've used MMA to develop a USB device before and was able to look at the raw data in the message view to ensure the correct data was being sent in the descriptors. This does not appear to be showing up any longer. I'm currently using MMA 1.4
When I click the message that shows a USB transaction and scroll to the bottom of the Details window, the DeviceDescriptor is in the list, but it does not show any data and the Message Data window shows: "No Data Source data not available for display"
The UsbLength field clearly indicates that 18 bytes have been transferred and the device is working properly so I know the data was sent. How do I inspect the raw data for the device descriptor?

Read other answers
RELEVANCY SCORE 79.6

Hi,
I have an USB device (an embedded system that I am developing) and associated driver.
It has one interface with two endpoints (BULK IN and BULK OUT) and control endpoint.
When I connect that USB device to PC, then device driver is getting associated with device and I am able to use the device.

Now I have updated USB device descriptor to have one more interface (all other information like VID, PID are same and also existing interface is not altered). Now it has: one control endpoint, one interface with BULK IN and BULK OUT and another interface
with BULK IN endpoint.

When I connect this USB device with modified device descriptor, USB driver is not getting associated and giving me error code: 10 (0xA).

Device driver software is from 3rd party.

Now I am not sure if error is thrown by windows kernel or device software.
Please help me in debugging this.

Any log files/events that can be enabled when device is connected and how driver is loaded, what checks are performed by kernel to load the driver etc (I believe it only looks at VID and PID).

FYI: Same setup works on Linux environment (looks liek linux just ignores this additional interface added)

Rgds,
Venkat.

Read other answers