Over 1 million tech questions and answers.

Yoga 13 does not sleep on lid closure

Q: Yoga 13 does not sleep on lid closure

Hi all, I've had a Yoga 13 for nearly a full year now with no problems until recently, when the laptop has constantly failed to enter sleep mode when the lid is closed. As a result, the laptop will continue to run in my bag until the battery drained. It is not a problem of rewaking when closed, as the screen will remain on with lid closure and the laptop never enters sleep mode. Is there a way to tell if this is being caused by a software problem (recent update to 8.1) or if the hardware involved in sensing a closed lid is now faulty? Steps already taken:Usng advice from a previous thread, I have uninstalled the Lenovo Energy Management software - this does not solve any conflicts with Window's own energy management.Power options shows that device is supposed to sleep on lid closure - changing settings to hibernate did not cause machine to hibernate on lid closure either.Powercfg shows no wake timers, -devicequery wake_armed shows "RTL8723A 4.0 + High Speed Chip." However, these should only be impacting the problem if it was waking from sleep - my device never enters sleep in the first place. Thanks for the help - hopefully I can fix this while hanging on to this fantastic laptop.

RELEVANCY SCORE 200
Preferred Solution: Yoga 13 does not sleep on lid closure

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Yoga 13 does not sleep on lid closure

I know I'm digging up an old post and I'm not sure if you've figured it out. I also had this problem and I think I've 'fixed' it. When I was trying to diagnose the problem, I too tried to watch the screen closely as I closed the lid. I noticed that right before the magnets click together, I saw a notification appear on the screen. If you open the lid again fast enough, you might be able to see the message. The message I saw was a digalog box asking me if I wanted to enable tablet mode. This made me think that for some reason, the laptop thought I was actually folding the screen backwards (into tablet mode) when I was actually closing the lid. What I did was to fold the screen all the way back, waited for the computer to show the dialog box, I chose an answer (I think I chose 'Always ask'), and then folded it back into regular laptop mode. I closed the lid, the screen turned off, and the computer went into sleep mode (the setting I chose in Power Options). Hope this helps.

Read other 1 answers
RELEVANCY SCORE 64.8

I have 4 of the new X1 Yoga Gen 2 (20JD0015US). One of the users is having issues with the function key row sticking down when they open screen lid. It appears the keys flatten out either way when lid is closed or flipped over for tablet mode. I am curious if this is a known issue or just a bad unit?

Read other answers
RELEVANCY SCORE 48

Hello, we got 2x Try-and-Buy Lenovo Yoga Tablet Laptops (an X1 Yoga and a Yoga 260) to evaluate their suitability for our company, since we intend to upgrade several of our employees laptops. However, ever since we got the devices we noticed on both of them frequent issues with the display and waking from sleep. Very often the laptops won't wake up properly with the screen staying black. In those cases the display-backlight seems to turn on, and I assume the system is running somehow in the background. Putting the computer to sleep again (e.g. by closing the lid) makes the computer wake up properly on the second attempt. Different error in the same category is when a video is running and the laptop is connected to AC - plugging out the AC cord made the screen go black while the media content's sound kept playing. All drivers were updated to the newest version via Lenovo System Update 5.07.0029. Any ideas? I also tried to open a support ticket, but Lenovo wanted to send and install a new display (!). Apparently, that seems like a driver/software issue?! Best regards

Read other answers
RELEVANCY SCORE 44.8

In the past 2 days, my new Yoga 14 has gone to sleep while in use. If I check the event log, the sleep reason is button or lid. I've got about 2 weeks left on the return window and will probably return if I can't find a solution for this.

Read other answers
RELEVANCY SCORE 44.8

When I close my Yogo 900, it often does go to sleep. It continues to run (and of course eating battery). I've installed all the latest drivers and BIOS. Any ideas how to solve this?

Read other answers
RELEVANCY SCORE 44.4

When I try to save as... Programs the Program closes unexpectedly. This applies to Microsoft Word, Publisher, AceMoney, iTClosed down the laptopunes etc. It worked perfectly previously. I have shut down the computer and restarted and re-installed programs without any success.
 

Read other answers
RELEVANCY SCORE 44.4

I've recently updated to XP pro. from ME. I find that I can not read discs copied or recorded now. It seems like the disc is not being closed after burning it does this on all programs cd and dvd I'm running a sony dvd burner along with music match and easy cd creator 6. it will record fine but than won't recognize discs on any player cd or dvd I contacted my computer manufact. they had no clue and told me that xp pro was incompatable with the record software and that I needed to remove xp. reformat the hard drive and reinstall ME.. Sony gave me the run around.. spent $100.00 waiting on hold and getting alot of nothing from roxio can anyone fix this without having to scrub the hard drive and removing XP pro. thanks Bilbo
 

A:closure of recorded cds

I have XP Pro and Roxio (although not my favorite). When you burn a disk, teh dialog box should have a section that allows you to "finalize" the disk. Another option is to put the open disk in the drive, then click File>Finalize

Hope this helps,

MBN
 

Read other 3 answers
RELEVANCY SCORE 44.4

Hey all.
I've recently been having a few issues with Firefox.

Today i've noticed that my CPU hit 100% and when i checked my processes it i noticed i had 3 firefox.exe's.

Well i closed firefox and two of them still remain.

All this confused me so i completely removed firefox and then installed version 3.5, everything seemed fine until i opened firefox.

As soon as i opened firefox my cpu hit 100% again and remain that way even after i closed firefox.

I decided to kill the processes for firefox and then my cpu dropped back down to idle and i could continue surfing with firefox again without any problems.

So it seems to be the first initial opening of firefox which sets off this issue.

Now i'm unsure if firefox is trying to run an update in the background as i can't seem to locate anything odd in my processes or on my Comodo firewall connections.

I've run a AV scan just incase and everything was clean.

So, any ideas?
Thanks
 

A:Firefox & Max CPU after closure??

Read other 11 answers
RELEVANCY SCORE 44.4

I've had the problem where the Yoga 3 won't turn back on.   Fully charged, power cable in and out, even tried the hold down the power button for 10, 20, 30 and 60 seconds. Disconnected the battery, ran off power cord and ran every virus/system check.  Put everything back together and everything works fine.... for a day or so, then same problem. Thoughts? Is this a function of coming back from sleep, i.e. can I work around this by never letting it go to sleep?  Would replacing the battery fix the issue (and if so which battery should I get?) Sean

Read other answers
RELEVANCY SCORE 44.4

I have a Yoga 700 14ISK that refused to boot.   4 beeps. 1st Question: Where can I find the beep codes? I had a second machine with a broken screen.  So I swapped screens and SSD.  However that second machine also has a broken power button (they are on the side where they are designed to be broken easily). The second machine boots OK with the hidden emergency boot button.  Needed to reinstall Windows (?) but then machine works OK. Shutting lid seems to sleep machine.  Opening lid is recognized, keyboard lights up.  But no boot.  Can only cold boot. Ideas?

Read other answers
RELEVANCY SCORE 44.4

I have been on the phone with Tech support nonstop over the issue of my 1 month old Yoga 710 constantly going into Sleep mode and blanking out in the middle of doing work or conducting a presentation. I want to get rid of this POS in the worst way possible. Last fix the Lenovo tech took control of my machine and updated the video driver, well that didnt fix it. looks like my only recourse is to beg Best Buy to let me exchange it for a Dell

Read other answers
RELEVANCY SCORE 44.4

I had posted about this near the start of 2016 and then a BIOS update was released to fix the issue. The Yoga 900 wakes up from sleep when picked up and rotated. Previously, the issue was with the screen hitting the buttons and waking the laptop up. Now, I think it might have to do with rotating it when it is asleep. I do not have this problem if I rotate the laptop as it is going to sleep, only if I pick it up after it has gone to sleep. I have been having this issue since the last BIOS update was released. Is there some way to fix this problem? If not, can an update be released to fix the issue? If I need to clarify something about the problem, please let me know. 

Read other answers
RELEVANCY SCORE 44.4

Yoga 900 will not wake from sleep. The power button on the laptop is blinking, indicating the laptop is in sleep mode. Pressing the power key has no effect. Pressing power key for a few seconds (hoping for a hard reboot) also has no effect. Must remove battery to reboot the computer. This is an intermittent problem. The problem occurs randomly. I have not been able to establish any pattern related to how sleep was initiated (e.g. was sleep initiated by: closing the lid, clicking on sleep in the Windows GUI, pressing the power button). The problem has occured 5 times but it is a major hassell when it occurs.
 
Moderator note: post moved from old ThinkPad thread to Yoga forum.  Subject edited to match content.  Was: Re: W520 will not wake from sleep

Read other answers
RELEVANCY SCORE 44.4

I recently bought an X1 Yoga 3rd Gen for a user at work and I want to love it - the machine is gorgeous, physically well built, best screen I've seen on a laptop, wonderful key feel, etc. But the thing doesn't work. When it goes to sleep (lid closed or selecting sleep in Windows) it simply will not turn the screen back on. I'm on the latest BIOS (and tried the last one). 1709 and 1803. All the drivers from the Lenovo site or none of them (Windows Update drivers only), doesn't matter. No combination of anything I do to this machine will get it to turn the screen on when waking from sleep. I have to give my user a computer, and I'm at a total loss for what to do next - any ideas?

Read other answers
RELEVANCY SCORE 44.4

I just spent the last 30 minutes searching for this issue and can't seem to find anyone else who is having this problem.  The issue I'm having is that whenever I flip the lid to go into tablet mode, the machine seems to go into sleep or hibernate.  It doesn't do it 100% of the time, but it will always do it when I really need to go into OneNote to take some quick notes but instead waste time having to flip it around again, log in, and flip back into tablet mode a second time.  Occasionally, it will shut down completely instead of going to sleep, or resume but with a blank screen, forcing me to manually power it off by holding the power button, but these occurances aren't nearly as frequent as it going into sleep.  Another thing I noted is that when it resumes from the sleep mode it goes into, sometimes the Lenovo Battery Guage will show up with a red X, as though a battery isn't detected.  I find it odd because the machine functions just fine on battery.  If I plug in the AC power in this state, it will recognize the AC power as plugged in, but the battery gauge's status of "no battery" does not change.  If I open the battery app, it properly detects the battery and its charge level.   Things I have done to attempt resolution:* Disable all sleep/hibernate mode options in Windows Power Manager* Checked all applicable settings in the Lenovo Settings app* Ensure system was up to date with all Windows Updates, as well as... Read more

A:X1 Yoga going to sleep after flipping lid

I guess I've come up with a diagnosis and a partial solution.   The problem apparently was the computer constantly failing to see the battery installed.  It would randomly detect the battery as not being installed, even when I was on battery and the machine stayed on just fine.  The battery has been functioning perfectly in the sense that I could operate off of AC power without issue, but the Power Gauge would show no battery being detected, then eventually it would come back and be fine, showing the proper charge level.   The reason the machine kept "turning off", or in this case Hibernating, was because Windows is set to either go to Sleep or Hiberate when it reaches the "Critical battery action" percentage in the Power Manager.  Because the battery would no longer be detected, the "Critical battery action" would kick in because it would think the battery is completely out of juice.  Unfortunately, Windows does not allow you to set this action to "Do nothing", offering only the options of "Sleep" or "Hibernate".   The partial solution:I followed a procedure I found for another model.  It involved the following steps: 1) Go into the BIOS2) Disable the battery3) Shut down machine and disconnect the battery4) Plug in AC power and boot into the OS5) Shut down the machine, disconnect AC, and press the power button 10 times6) Reconnect the battery and AC and boot into Windows So far, after doing that proce... Read more

Read other 2 answers
RELEVANCY SCORE 44.4

I can not find it.



Your mum








Solved!
Go to Solution.

A:WHere is the sleep button on the yoga 460

Do you mean a physical button? I've made a quick scan through both the Yoga 460 hardware manual and the user guide, and I can find no reference to a "sleep button". Where do you see such discussed/hinted at?
 
Regards.

Read other 9 answers
RELEVANCY SCORE 44.4

Anyone else having a problem with it not waking up from sleep? I put it to sleep, the screen goes black and the keyboard is still lit up. I try to press the Windows logo on the screen or the power button and nothing happens. I feel the vibration but that is it. What I find funny is that I can still turn on and off the backlit keyboard.

A:Yoga 2 Pro not waking up from sleep

Yeah, so it eventually turns off on its own to the point where the Windows logo below the monitor no longer vibrates when pushed and I have to power on the machine. Might just do a restore and see what happens from there...

Read other 9 answers
RELEVANCY SCORE 44.4

Hello, the X1 Carbon 6th Gen recently got the BIOS update version 1.30, which added a switch in the BIOS to enable S3 sleep for better Linux support. Otherwise the Laptops only support SI03 sleep.Since the X1 Carbon 6th Gen and the X1 Yoga 3rd Gen are technically the same hardware, besides the Yoga stuff, it would be nice to also have these BIOS updates on the Yoga version, which is still at version 1.24.Are there any informations if the S3 support is also coming to the Yoga 3rd Gen? Best RegardsTim

Read other answers
RELEVANCY SCORE 44.4

Just got a brand new Yoga 710 w/ Win 10 Pro and the system just shuts down when put to sleep.Happens when:- I close the lid (even if "close lid" power option is set to sleep), or- I select the "Sleep" option from the Start [equivalent] menu, the system immediately shuts down (within seconds),- Leave the system idle for 5 min (what sleep timeout is set) And since it shuts down:- I lose any open document, applications running, etc. Also, on restart, Windows occasionally will also complain that it wasn't shutdown properly, starts to scan disk, etc. This is really BAD!- Pressing the mouse or keyboard doesn't do anything and only pressing the power button will get it working again (and I see the Lenovo BIOS logo, etc.).It feels like the OS is trying to go to sleep, but the laptop is shutting down instead. I tried calling Lenovo customer service but the response was really really unacceptable:- First tried to disable sleep completely and saying that that since this is a new machine so that should be okay.- I asked what about battery life if I don't use the laptop (say overnight) for a while -- response was I should shutdown the laptop. I checked the power option, tried disabling hibernate, disable fast boot, etc. and other suggestions from searching the forum but nothing worked.   Also checked BIOS settings but there's not much that can be changed (which is rather surprising).Drivers are BIOS are up-to-date. Any other ideas?  Any one else seeing this i... Read more

Read other answers
RELEVANCY SCORE 44.4

I cannot get the Y2P to shutdown or sleep. When I try to shut down it powers off but after about 2 seconds it turns itself back on and boots up. Same thing happens when I try to sleep. Please help! I've tried pretty much everything I could find online including the following: Turn off wake on lan on the network adapterTurn off auto restart on windows errorsUpdated biosUpdated driversDisabled all non microsoft servicesFactory reset of the OSWent through every device in device manager and turned off "Allow this device to wake the computer"powercfg /lastwake (shows nothing) Anyone have any other suggestions on fixing this problem? Shutting down isn't a huge deal as holding down the power button will eventually turn it off. But not being able to sleep the laptop when I close the lid is a deal breaker as the battery constantly drains.













Solved!

Go to Solution.

A:Yoga 2 Pro will not shutdown or sleep

Can you take a screenshot or send us the Windows Event Viewer System logs? The source of the problem might be found there.Also try accessing the BIOS settings, make sure LAN wake and Magic packet and similar things are disabled.

Read other 8 answers
RELEVANCY SCORE 44.4

I have an issue with my Lenovo Yoga 90013ISK (with Windows 10).The laptop goes into sleep mode after about 2 minutes if i do nothing on the laptop. (If i listen to music or watch a video, it does not go into sleep mode)It also only happens, if i wake the laptop up from the sleep mode. (If i shut it down and restart afterwards, it will not go into sleep mode) I updated all drivers and also tried to adjust all settings in the powermanagement-module, but nothing changes.

Read other answers
RELEVANCY SCORE 44.4

I have a Yoga X1 (1st generation).  I have the screen set to max brightness.  When I wake the laptop from sleep, the screen is always dim for a few seconds before going to 100% brightness.  I would like the screen to start at 100% brightness.  How do I prevent it from starting dim.  (Note: I have adaptive brightness turned off and I tried going into the Intel Graphics Settings and changing the Power Plan to Maximum Performance.  These interventions didn't solve the problem.)

Read other answers
RELEVANCY SCORE 44.4

Hello, My Yoga 900 has woken from sleep in my backpack multiple times. I have tried to find a setting to disable the keyboard while the computer is asleep, but I have not been able to find one. I have asked technical support about this problem and they too do not have a solution. I requested the agent I spoke with to pass along my request to the tech department and he agreed to do so. Is there some existing way for me to solve this issue? 













Solved!

Go to Solution.

A:Yoga 900 waking from sleep

Hello, Why don't you just put the Yoga to hibernation while in your backpack ?

Read other 9 answers
RELEVANCY SCORE 44.4

Hey everyone, I was wondering is it normal for the fan to be still running after I put the laptop to sleep? It happens both with clicking "Sleep" in the Start Menu and closing the lid. I can see the think red dot starting to blink but the fan still runs for about 30 seconds or so with hot air pumped out. I've never noticed that with the X1 Yoga 2nd Gen. Is this a new feature or a new bug...? Thanks a lot! Jack

Read other answers
RELEVANCY SCORE 44.4

Hi all, Facts :Last august 30th, I ordered a Lenovo Yoga 3 14 (i5 / 8 / 256) from Amazon.It's been delivered one week ago (02/09/15).Two days ago (monday), I installed Kaspersky antivirus, downloaded the files for Windows 10, closed the screen and it went to sleep...And never woke up again ! I tried any and every keys / switches combo I thought of (power switch w/o volume switchs + and -, Novo switch, function keys, Ctrl/alt/ del, ctrl/shift/esc, escape, spacebar, enter... Right now, the power led is still on, the PC runs on battery and I'm waiting for it to run out of charge.I can hear and feel a very tiny ventilation from the back. The USB ports are active since my phone and an external HDD are plugged in them.The keyboard doesn't respond or enlight itself anymore. Despite all my tryings, I get no sound from the speakers... So I hope I will be able to reboot it and find a suitable solution (BIOS, driver update ?).The Yoga is new (one week old) and I'm yet already struggling to bring it back to life !!!!! Question :Is there any way to manually shut down the computer (the power switch for 60 sec doesn't work, the battery can't be taken out, no reset pin hole...) ? LENOVO, please HELP !!!!!I was so happy of this computer, don't let yous customer down. PS : As soon as the battery turns off, I'll try to save the PC and let you know how it goes.Sadly, I'm already considering to turn it back.

A:Yoga 3 14 won't wake up from sleep !!!

Auto-reply.The PC ran out of battery.Once it's been plugged in again, it booted nicely.I'm now downloading Win10 and associate drivers.Wait and see... ++

Read other 9 answers
RELEVANCY SCORE 44.4

I've has a history of sleep issues on my yoga 3 pro that came with Windows 10. Short History-------------1) Work properly for a few months after purchase2) The issue started (Laptop starts sleep process, screen goes blank, keyboard stays lighted, power stays lighted. It never goes to sleep, I cannot wake it, and need to hold the power button down for 10 seconds (i.e. kill power entirely))3) After many driver updates I still had the problem. I can only assume a Windows update started the issue but who knows.4) I noticed a BIOS update from Lenovo the other day so I gave that a shot. I was at version ***56*** and it was ***58****. It fixed the issue!5) Received Windows Update (Build 1607, Anniversary update) and now the problem is back. I've disabled sleep entirely as my current solution, but would like sleep to function as intended. Does anyone have a suggestion on how to fix? Does anyone know the root cause? Thanks 

Read other answers
RELEVANCY SCORE 44.4

I had posted about this near the start of 2016 and then a BIOS update was released to fix the issue. The Yoga 900 wakes up from sleep when picked up and rotated. Previously, the issue was with the screen hitting the buttons and waking the laptop up. Now, I think it might have to do with rotating it when it is asleep. I do not have this problem if I rotate the laptop as it is going to sleep, only if I pick it up after it has gone to sleep. I have been having this issue since the last BIOS update was released. Is there some way to fix this problem? If not, can an update be released to fix the issue? If I need to clarify something about the problem, please let me know. 

A:Yoga 900 waking from sleep

Hello, I know there have been BIOS updates in the past to address this issue, but my laptop still occassionally wakes from sleep with the lid closed. Is anyone else having this issue? If not, is there a setting I may be looking over that would fix this problem? 

Read other 2 answers
RELEVANCY SCORE 44.4

I have a Yoga Pro 2. i7, 512 GB harddrive(the most expensive one).  The computer will not wake up from sleep mode. I have tried modifying the sleep settings. I have updated all the drivers(this laptop is less than 2 weeks old). If I use the settings on the laptop or if I close the lid, it goes into sleep mode. But Nothiong I do short of doing a hard restart will bring if out of sleep. Does anyone have any suggestions to overcome this.  Thanks. 













Solved!

Go to Solution.

A:Yoga Pro 2 Sleep Mode

So I just updated the non essential microsoft updates, and sleep mode seems to work again.... If anyone is having this issue try this to see it if helps. 

Read other 2 answers
RELEVANCY SCORE 44.4

When I try to put yoga 900s to sleep (both press power button and close lid) light at power button still on (not blink). Once I open lid or press power button then nothing happend. Yesterday it works fine. This issue just happended today.. Please someone help me. Thank you.

Read other answers
RELEVANCY SCORE 44.4

I sold my Yoga 460, and downgraded to the Yoga 12, now the Fn + 4 does not put to sleep. Any solution?
 
Mod's Edit: Additional information added to Subject line for clarity of issue and moved post to its own thread.
 

Read other answers
RELEVANCY SCORE 44.4

Hi everyone,  I bought a Yoga 920 about a month ago, and in the last week or so have had an issue with the computer's sleep function. Essentially, when I put the computer to sleep (either by shutting the lid or clicking using the mouse or pressing the power button), after a few minutes, it will not wake like you would expect it to do so under regular operation. The only way to awaken the laptop is to hold the power button and do a hard reset. This has caused me to have to do a hard reset multiple times a day.  The issue appears to be similar to this: https://forums.lenovo.com/t5/forums/v3_1/forumtopicpage/board-id/ll06_en/thread-id/34896  Has anyone had a similar problem? What solutions are there? 

Read other answers
RELEVANCY SCORE 44.4

I've had this happen a few times and only when I least expect it.  I thought that perhaps it didn't like me disconnecting devices after shutdown but after several rounds of testing, I think the problem is closing the lid (which is set to sleep) but not always. Is anyone else finding that sometimes when the computer should sleep that it's shut down completely, without hibernating, thus resulting in a cold boot the next time it's started up? Each time it's happened, I've found the following event in the event log at the same time that I expected the computer to sleep, so I know that it's not a case of an attempt at hibernation that failed. Log Name:      SystemSource:        EventLogDate:          5/22/2017 5:11:59 PMEvent ID:      6008Task Category: NoneLevel:         ErrorKeywords:      ClassicUser:          N/AComputer:      FennelDescription:The previous system shutdown at 3:01:37 PM on ?5/?22/?2017 was unexpected.Event Xml:<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">  <System>    <Provider Name="EventLog" />    <EventID Qualifiers="32768">6008</EventID>    <Level>2</Level>... Read more

Read other answers
RELEVANCY SCORE 44.4

Hi there, I'm not sure if this topic's been brought up since I couldn't find it. But I recently purchased the Yoga 920, and everything works fine except that the laptop goes to sleep after some time on it's own. I've changed the power settings for both screen lid down as well as the "put computer to sleep" to "nothing" and "never" respectively and it still happens. Even in my advanced power settings, there's only a very limited power menu. Also possibly related, there's only a "balanced" power plan, no battery saver or high performance. Regardless, it's driving me insane and any help would be appreciated, thanks!

Read other answers
RELEVANCY SCORE 44

Installed IE9. How can you prevent IE9 from exiting when closing the last tab?

A:Prevent IE9 Exiting on Last Tab Closure

You cant as far as I know. In chrome you have this extension called Last man standing that does this job, but nothing for IE. But you can turn off tabs completely.

Read other 2 answers
RELEVANCY SCORE 44

i run my process viewer.. i startup up spyblaster. i see the process in the viewer. At the end, as Spyblaster suggests, I close the application by selecting the X. spyblaster is no longer in the process viewer. How is it still protecting me.
 

A:spyblaster -- how does it protect after closure

Hi qblitz

SpywareBlaster places sites in your Restricted Sites Zone.

Check for updates about every other week and it will update your Restricted Sites Zone when you click Enable All Protection.
 

Read other 2 answers
RELEVANCY SCORE 44

Okay, so I have worked this problem for 3 weeks now. I am a Computer Engineering Student so I understand a lot of the terminology. So basically randomly when I close the lid of my laptop instead of going to sleep it shuts down. Attached is everything the SF tool picked up great information but still cant decipher the problem. Any help would be greatly appreciated.

Also side note I noticed the problem happening more when my Razer Naga Epic is plugged in and/or removed. I have uninstalled and deleted drivers for it and started from scratch but with no success in improvement.

A:BSOD DRIVER_POWER_STATE_FAILURE (9f) on lid closure

Uninstall Asus bloatware, take care of the npf.sys: Driver Reference Table - npf.sys, update nvidia drivers and disable Nvidia Streaming Kernel Service within services.msc. Bluetooth driver is casing a lot of issues on your system, please update it. I'd recommend physically detaching Razer devices and removing their drivers as they were known to cause issues (BSODs) in the past.


Code:
ASMMAP64.sys Thu Jul 2 11:13:26 2009 (4A4C7A36)
LENOVO ATK Hotkey ATK0101 ACPI UTILITY (also found in Asus systems)
http://www.carrona.org/drivers/driver.php?id=ASMMAP64.sys

npf.sys Fri Jun 25 18:50:58 2010 (4C24DE72)

npf.sys - this driver hasn't been added to the DRT as of this run. Please search Google/Bing for the driver if additional information is needed.

AiCharger.sys Fri Sep 23 04:04:40 2011 (4E7BE938)
Asus Charger Driver [br] Likely BSOD cause - haven't seen recently (15Jan2013)
http://www.carrona.org/drivers/driver.php?id=AiCharger.sys

btwl2cap.sys Thu Jul 26 17:14:41 2012 (50115EE1)
Broadcom Bluetooth L2CAP Servicen
http://www.carrona.org/drivers/driver.php?id=btwl2cap.sys

kbfiltr.sys Thu Aug 2 05:22:22 2012 (5019F26E)

kbfiltr.sys - this driver hasn't been added to the DRT as of this run. Please search Google/Bing for the driver if additional information is needed.

atkwmiacpi64.sys Tue Jul 2 10:35:32 2013 (51D290D4)
ATK WMIACPI Utility
http://www.carrona.org/drivers/driver.php?id=atkwmiacpi64.sys

plctrl.sys Thu Jul 11 05:23:44 2013 (51DE2540) ... Read more

Read other 14 answers
RELEVANCY SCORE 44

20/5/01
When I exit/shut down IE5, my internet connection remains connected and i have to close this separately.
How can I close my connection on shutting down IE.
M Flowers
 

A:IE% /Internet connection closure

Within IE select Tools, Internet Options, Connections tab. Click your Dial-Up Networking connection, and then click Settings. Under Dial-up Settings, click Advanced. Click the "Disconnect when connection may no longer be needed" check box to select it. Click OK a few time to save and exit. Enjoy.
 

Read other 1 answers
RELEVANCY SCORE 44

Dear People
I am currently using a c compiler on my Windows O/S, however after about 5 mins the compiler shuts down without warning. Please help this problem is causing hitherto unknown depths of despair :

A:Unexpected window closure !

Have you tried un-installing/re-installing yet?

Read other 2 answers
RELEVANCY SCORE 44

My X1 Carbon (model 20A7, 2nd generation I believe) suddenly stopped detecting closure of the lid.  Previously, when I close the lid, it would put the laptop into Sleep but now it just continues running.  I checked the Control Panels setting and it is still setup to go into Sleep when lid closure is detected so it seems it is smply not detecting it.   In addition, I often work with this machine docked and previously when it was docked, it would not use the attached LCD screen but would only display on the two monitors I have attched to the Lenovo docking station.  Now, when I power up hte laptop on the docking station, it displays one monitor on the laptop LCD even though the lid is closed and only on one of the monitors attached to the docking station.  I fix this by going into the Control Panel -> Display where I know see three monitors (two external and once LCD on the laptop) and I can disable it from there, but I shouldn't have to do this everytime I dock.   I don't see any mechanical switches to detect lid closure so it must be a magnetic detetion.  Any ideas on how to diagnose this? Thanks,Matt

Read other answers
RELEVANCY SCORE 44

Hello,

Of late, I am encountering with the problem of some programs (paid .exe programs) are closing by itself within few seconds after I try to launch them.

These programs were working very good for the past few months and this problem has come up for the past few weeks.

When these windows close by themselves, I do not get any error messages. I have tried several times and facing the same probelm.

My computer is Dell 700m and I work on Windows XP professional.

These are my small business related and I am looking for some help from anyone who can tell me what could be the error /s and how to identify the possible probelm and possible solition.

Please please help.

Thanks
 

A:Applications abrupt closure

I'd start by looking in both the event logs and see if anything is being logged when the programs abort. With no additional information, it's pretty hard to be more specific. What "specific" applications are we talking about?
 

Read other 3 answers
RELEVANCY SCORE 43.6

Hello, I have read other people having the same issue. Suggestion seems to be update the bios. But here it comes a second big issue, I can not update bios! I tried from "BIOS Update Utility for Windows 10 (64-bit), Windows 8.1 (64-bit), Windows 7 (32-bit, 64-bit) - Thin..." it starts the procedure but then it re-boots ending up in an (apparently) sleep state with the blinking led. The only way to start again is pressing the button for several seconds, but then once checking the current bios version I realize it did not really update.  I don't know how many times have tried this, getting crazy. Please help!

Read other answers
RELEVANCY SCORE 43.6

Support blew me off and told me I had to pay for software support so this is my last effort to resolve this issue before I return this thing...
 
I have a yoga 900 and have set the power options to make the laptop sleep when the lid is closed. When I close the lid the laptop/tablet thinks that its been switched into tablet mode and prompts you to change to tablet mode in windows. Its as if I flipped the screen all the way around the other way. The unit does not sleep and just sits there eating up battery. Has anyone else encountered this?
 
Thanks,
Landon.













Solved!

Go to Solution.

A:Yoga 900 Lid close sleep issue

Landon wrote:
 
I have a yoga 900 and have set the power options to make the laptop sleep when the lid is closed. When I close the lid the laptop/tablet thinks that its been switched into tablet mode and prompts you to change to tablet mode in windows. Its as if I flipped the screen all the way around the other way. The unit does not sleep and just sits there eating up battery. Has anyone else encountered this?

You seem to be saying that you yourself have "set the power options to make the laptop sleep when the lid is closed". If this is so, I don't understand, because the Yoga 900 should be set this way in the factory by default.
 
This screenshot shows what the settings should be by default:
 
http://1drv.ms/1YJPV7N

Read other 9 answers
RELEVANCY SCORE 43.6

My Yoga 920 is around 6 months old and this issue started about 1-2 months ago. Every time the laptop goes to sleep it won't wake up. The only way to get it awake is to force restart it by holding down the power button. The trackpad won't wake it up, the keyboard won't an extrenal mouse won't, nothing will. The BIOS is updated and I have no other updates that deal with power (as far as I can tell) left to download. I have no idea what to do. This issue is very annoying as I have to restart everything any time I put my computer to sleep.

Read other answers
RELEVANCY SCORE 43.6

Question says it all for the most part.  Just got my Yoga 260.  Works great expect it will NEVER wake from sleep.  this is a huge problem obviously as I have to do a hard reboot by holding hte power button in until it dies then press again to boot the machine. power light blinks just as it should in sleep but nothing will allow it to wake except holding power button down doing a hard shutdown then reboot.  Anyone have a fix for this?  Thanks.

Read other answers