Over 1 million tech questions and answers.

Can't install Windows 7/8, error 0x80070570

Q: Can't install Windows 7/8, error 0x80070570

Hi,
I've just bought an Asus X201E. I got the linux version, because as a student I get a free MSDN copy of any Windows OS... Long story short, I've been trying both Windows 8 32/64bit and Win 7 32 bit, all of them dosplaying an error during unpacking system files in the installation process @32-42%. I've tried everything, switching the SATA mode to IDE, rebooting, switching flash drives, etc. Since there are X201E models being sold with Windows 8 I figured there would be no problem installing it? Help please, it's really driving me mad..

RELEVANCY SCORE 200
Preferred Solution: Can't install Windows 7/8, error 0x80070570

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Can't install Windows 7/8, error 0x80070570

Welcome to EightForums.

All Linux code must be deleted using the CLEAN ALL command.As you have had linux on the HD you need do a Clean all & full format.

Clean the HD Drive, using Step one in this tutorial:
SSD / HDD : Optimize for Windows Reinstallation - Windows 7 Help Forums

Read other 3 answers
RELEVANCY SCORE 76

I tried installing Windows 7 64bit on my new build (new HDD) everything was going as expected, but when it got to about 10% "expanding files" I got the error msg in title. When I clicked "ok" it took me back to the "Intall Now" screen where I figured I'd click that again (no reboot) and went through the steps until I got to the "Where do you want to install windows?" part. However, it now shows to locations instead of just one.

Disk 0 Parition 1 System Reserved 100MB total 86MB free System
Disk 0 Partiion 2 596.1MB total 594.1 free Primary

Where do I go from here? BTW, it is the Full Retail version I just bought!

MB Asus P7P55D-E Pro
Intel i5 760

So much for my Saturday gaming fun:(

A:windows 7 install error 0x80070570

Hi -

Wipe the HDD completely with KillDisk -
- http://jcgriff2.com/0x1/killdisk_imgburn.html
- http://www.techsupportforum.com/2789807-post8.html

Try Windows 7 installation again.

Regards. . .

jcgriff2

`

Read other 4 answers
RELEVANCY SCORE 75.2

Every time i try to install windows7 it shows 0x80070570 error.
my pc conf :- 2gb ddr2 ram, duel core processor , 500 gb hdd , os xp2,

A:0x80070570 error showing when trying to install windows 7 !!!!

What is the make and model of your PC?

Try going into bios drives change the drive to RAID Autodetect (ATA) if it is already set to RAID change it to AHCI. Hit F10 to save the changes the try to install Windows again.

Make sure you unplug any USB drives, only have your vga (Monitor) plugged in and your keyboard and mouse when installing Windows.

Try using the Windows 7 Advisor to see if your system is compatible with Windows before upgrading. The link or button is below the install button.

Read other 3 answers
RELEVANCY SCORE 74.8

How can I resolve this common problem I have... unknown error during install of Windows Service Pack SP1 update ? I had to restore my older notebook to factory status and now this important update won't complete the install due to this error code. I also
can't update Internet Explorer browser from version 8. Can somebodey help me with these issues?

Read other answers
RELEVANCY SCORE 74.4

Hey guys I just built a PC and tried to install windows 7 ultimate.
Specs:
-i5-3570k
-gigabyte ga-z68-ud3h b3
-8gb ram
-sandisk extreme 120GB ssd
-coolermaster 525W extreme PSU
Seagate 500GB storage drive

I first tried the DVD and got this error:

I assumed it was a corrupt DVD. I then downloaded the ISO from Microsoft and installed on a USB. I got the same Error. Re downloaded and reinstalled, same error. I looked online and found out it could be a ram error. Tried one stick, tried different slots, tried completely different brand of brand new ram, all to no avail. It always goes to 9% then gives the error. Any ideas?

A:Cannot install Windows 7 on newly built PC (Error 0x80070570)

Unplug all other HD's and peripherals,

Boot into BIOS setup, reset to defaults, save changes. If an EFI BIOS you'll need to decide if you want UEFI BIOS vs. Legacy BIOS: if UEFI (Unified Extensible Firmware Interface) - Install Windows 7 with, or enable Legacy BIOS or Compatibility Support Module. Set DVD drive first to boot, HD second, set SATA controller to AHCI, Save changes and Exit.

Then boot into Windows 7 installer DVD or flash stick burned or written using tool and latest ISO for your licensed OS version here.

At first installer screen Press Shift + F10, or enter System Recovery Options to open a Command Box, type:

DISKPART
LIST DISK
SELECT DISK 0 (after confirming Windows 7 target HD #)
CLEAN
CREATE PARTITION PRIMARY SIZE=102400 (for 100gb partition, adjust as desired)
FORMAT FS=NTFS LABEL="WINDOWS 7"
ACTIVE
EXIT
EXIT

Next click Install Now, then Custom install to Clean Install Windows 7 to the partition you created. If it fails then report back at which step and the verbatim error message.

In addition read over these steps to understand the tools and methods which work best to get and maintain a perfect Clean Reinstall - Factory OEM Windows 7. The steps are the same for retail.

After install you can adjust partition size or Create new partitions for data, etc. in Disk Mgmt.You are creating the partition here for the purpose of marking it Active which overcomes... Read more

Read other 1 answers
RELEVANCY SCORE 74.4

Windows 10 Repair Install Error 0x80070570 - 0x2000C

The installation failed in the SAFE_OS phase with an error during APPLY_IMAGE operation.

So, I want to do a repair install. Have tried many times and keeping getting this error.

I have run sfc /scannow, and Dism, both report no errors.

I have searched here, and tried the install using English and English International ISOs (extracted). Both report the same error. It appears on the first reboot, about 2% into the install.

The install is onto a SSD, which was migrated (a few months ago), using Paragon Hard Disk Manager.

Look forward to your replies, thanks in advance.

Read other answers
RELEVANCY SCORE 73.6

windows cannot install required files. The file may be corrupt or missing. Make sure all files for installation are available, and restart the installation. Error code: 0x80070570. This happens when im trying to do a clean install on a blank ssd - Samsung using windows 8 or windows 7 ultimate. My computer is an Avatar Pitbull gaming computer and you can find the specs here :

Newegg.com - Avatar AMD FX-Series 16GB DDR3 2TB HDD+120GB SSD HDD Capacity Desktop PC Windows 8 64-Bit Gaming PitBull

A:Windows cannot install required files. Error code: 0x80070570

Unplug all other HD's and peripherals,

Boot into BIOS setup, reset to defaults, save changes. (If an EFI BIOS you'll need to decide if you want UEFI BIOS vs. Legacy BIOS. If UEFI follow these special steps for Install, otherwise enable Legacy BIOS or Compatibility Support Module to proceed with normal install.) Set DVD drive first to boot, HD second, set SATA controller to AHCI, Save changes and Exit.

Then boot into Windows 7 installer DVD or flash stick burned or written using tool and latest ISO for your licensed OS version here. Your installer is questionable so if it fails after one more attempt, try another ISO burned with tool in link, then try flash stick method.

At first installer screen Press Shift + F10, or enter System Recovery Options to open a Command Box, type:

DISKPART
LIST DISK
SELECT DISK 0 (after confirming Windows 7 target HD #)
CLEAN
CREATE PARTITION PRIMARY
FORMAT FS=NTFS LABEL="WINDOWS 7"
ACTIVE
EXIT
EXIT

Next click Install Now, then Custom install to Clean Install Windows 7 to the partition you created. If it fails then report back at which step and the verbatim error message.

In addition read over these steps to understand the tools and methods which work best to get and maintain a perfect Clean Reinstall - Factory OEM Windows 7. The steps are the same for retail.

After install you can adjust partition size or Create new partitions for data, etc. in Disk Mgmt. You are creating the partition here for the purpose of wiping the... Read more

Read other 7 answers
RELEVANCY SCORE 67.6

I am getting the error code 0x80070570 Everytime I try and install Windows 7. I am trying to do a custom install so it cleans out the computer. I have Windows 7 Pro OEM 32bit. I have the requirements it takes to put Windows 7 on a computer. I have tried two different discs same results. System is custom built, with Gigabit GA-H55M-S2H motherboar, Intel core i3, 4gb Memory, 500gb hdd. It gets past the part of coping files and then comes up with the Error code of 0X80070570. I have tried to install several times using two different discs and allways the same result.
 

A:Error 0X80070570 in WIN 7 Pro Install

Read other 7 answers
RELEVANCY SCORE 67.6

Been getting this error for the past few days. I have tried just about every recommendation I've seen on this error; Ive gone through 8 sticks of RAM, multiple ISO's and burns, USB install, different DVD drives, removing all extra USB devices, 2 video cards, multiple HDD's, canceling the install before it errors out and then restarting, all without luck. Anybody have any other ideas? Using a Maximus IV Extreme Z, no overclock.

A:Win 7 0x80070570 install error

Use 2gb of RAM for install. Test your RAM using memtest86 for 5-6 passes or overnight. Then when known good, test good stick in all slots to test slots: RAM - Test with Memtest86+

Where did you get the ISO? Try slow burning DVD at 4x speed with ImgBurn once you confirm the ISO hash against official Win7 HASH: Windows 7 RTM SHA-1 hash - checksums.
Win7 SP1 hashes are on TechNet Download page under details for each download and accessible even if not subscriber.

Next try writing ISO to flash using this simple tool with Win7 in dropdown: Universal USB Installer – Easy as 1 2 3 | USB Pen Drive Linux

Next check for BIOS update for mobo. If none, reset the CMOS: Clear CMOS - 3 Ways to Clear the CMOS - Reset BIOS.
While in BIOS setup set SATA controller to AHCI to try install.

Next try wiping the HD for possible boot corruption: SSD - HDD Optimize for Windows Reinstallation

As a last resort, move HD to another computer to install. SysPrep install before moving back to problem computer: SysPrep to move HD to another computer

Read other 9 answers
RELEVANCY SCORE 67.6

Hi everyone. First post here because I?m getting really frustrated with this error message. Error code: 0x80070570. I?ve tried searching around on the internet for a fix but I?m not coming up with a lot that pertains to my situation. I am clean installing a copy of Windows 7 professional x86 on an HP DV6700 laptop. This is an actual release copy obtained through Microsoft store front download. Everything works great when booting from the DVD until it starts expanding files. It has gotten as far as 49% before giving the error. Always seems to be a random number, I?ve tried probably 4 times.
I am positive that the disc is not corrupt because I installed Windows 7 without any problems using the same disc on my desktop. I have deleted every partition on the HP except for the recovery partition it comes preinstalled with. My next option is to delete this too but I would rather not. Anyone have any ideas how to fix this issue?
I also have another semi-related issue that I would love input on if anyone has any idea. After Windows 7 was unsuccessful I attempted to recover Windows Vista using the recovery partition. Everything installed fine until it tried to reboot. Now I get an error message ?Missing boot manager? and only an option to restart the computer. I?m afraid this is going to happen even if I get windows 7 to install so any help would be greatly appreciated. Thanks!

A:Install error 0x80070570

Hello rjw24. Welcome to sevenforums.

Please inter your system spec`s. you will fin it at the left hand side bottom of your post.

0x80070570 error code means that a file or a dir is corrupted.

Have you ever installed window 7 in this computer before??
If yes, format the 100mb partition before reinstalling windows 7.

Read other 9 answers
RELEVANCY SCORE 66.8

I'm trying to install windows 7 on my asus p4p800se 3.2ghz, 3.0gb pc3200/400 ddr ram...no matter clean install or upgrade options when files extracting at 20% usually i get this error (0x80070570) i can install winxp home no issues, no worries, stable works fine same settings/setup...i'm ready to keep winxp if i cant figure out a solution. maybe someone has similar issue that was resolved...thanks!

Read other answers
RELEVANCY SCORE 66.8

Hi,

I'm experiencing a strange problem when installing Windows 7. At the file expansion stage, error code 0x80070570 appears and my installation fails.
Funny thing is, I installed 7048 from a DVD burned image 2 weeks ago and it worked fine. Downloaded 7057 and durned the .iso to DVD and when trying to install to formatted partition this error appeared. Since then I can't re-install 7048 either!
This is driving me crazy, I've tried different DVD drives, re-burned the .iso's at slow speed, but no luck.
Anyone managed to resolve this problem?
BTW, I am installing x64 versions...
Thanks

A:Win7 install error 0x80070570

  
Quote: Originally Posted by Dubya


Hi,

I'm experiencing a strange problem when installing Windows 7. At the file expansion stage, error code 0x80070570 appears and my installation fails.
Funny thing is, I installed 7048 from a DVD burned image 2 weeks ago and it worked fine. Downloaded 7057 and durned the .iso to DVD and when trying to install to formatted partition this error appeared. Since then I can't re-install 7048 either!
This is driving me crazy, I've tried different DVD drives, re-burned the .iso's at slow speed, but no luck.
Anyone managed to resolve this problem?
BTW, I am installing x64 versions...
Thanks


Make sure you take your computer CPU and memory overclocks back to original specs. I can install by x86 without any problems but always have to take off my overclocks when I install or upgrade my x64 versions.

Read other 9 answers
RELEVANCY SCORE 66.8

Hi,

Hope someone can help me with this issue.

I am trying to install Windows 8 64 Bit on a HP 2530p laptop using a USB Flash Drive that I set up with DiskPart and copied OS files to - from DVD disc.
I first tried to install using a DVD disc in a external DVD RW I plugged into USB port of laptop - this laptop has no built-in optical drive.
I got the same error code with DVD disc that I get with USB Flash drive.
I formatted HD during beginning of install so there is no OS on laptop...

Windows cannot install required files. The file may be corrupt or missing. Make sure all files for installation are available, and restart the installation. Error code: 0x80070570.

I ran a MemTest86 and did a HD Test from BIOS and both passed.

Any thoughts?

Thank you all

gregmy123

A:Win 8 64 Bit Install Error Code 0x80070570

I would rebuild your USB install drive, you might have ended up with some corrupted files. Was this computer shipped with Win 8? if not then you'll need to set up your USB to boot UEFI, IE is has to be formatted fat 32, then on boot up hit which ever key on your computer that brings up a boot menu select you UEFI USB drive
UEFI Bootable USB Flash Drive - Create in Windows
Upgrade Install to Windows 8 or Windows 8.1

However I would use RUFUS to create your install USB thumb drive

Read other 7 answers
RELEVANCY SCORE 66.8

I do PC repair for low-income people in our neighborhood, and I was brought a Dell Inspiron 1520 running 32-bit Vista.

It wouldn't boot, even with safe mode, and when I booted from a disk no OS displayed.

I ran a utility that scans for and 'fixes' bad sectors (I assume that it merely makes them unwritable). There were 17 bad sectors that could not be fixed. I used another utility and ran a low-level format.

Hours later I used a Dell Vista CD and attempted to install Windows. Some time before it hit 100% on step 2 (Expanding Files) it gave me the 0x80070570 error. I know there's nothing wrong with the disk, but I tried it again and got the same results. Then I tried an install using a MS Windows CD, which did prompt me for the product key, but when it got to the Expanding Files step it just styed there at 0%. For hours...

Is the drive just too far gone to sustain the OS? I thought that if you did a low-level format it rendered the bad sectors as unusable, but this is a 120GB drive. They really can't afford a new HD. Shouldn't I be able to install and run Vista on the 100 plus gigabytes that are uncorrupted?

A:Install from Dell CD - 0x80070570 Error

To me it sounds like a bad hard drive and not just a few sectors.

Test Hard Drive

Harddrive scan usings SeaTools - SeaToolsfor Windows | Seagate - Both long and shorttests

Read other 3 answers
RELEVANCY SCORE 66.4

File downloaded form a secure place, burned at 1x speed. Downloaded the file 5-6 times burned 10 or so discs.

CRC errors possible hardware config, RAID?

SEE here: http://forums.techguy.org/hardware/806033-crc-all-exe-zip-rar.html
 

A:Solved: Win7 install error 0x80070570

Read other 9 answers
RELEVANCY SCORE 66.4

I am trying to install Windows 7 32-bit RC on a desktop PC. I have previously used this disk successfully to install the OS on a laptop.

I keep getting an error message to the effect thatWindows cannot install required files.
...
Error code: 0x80070570Initially I thought that this was due to a flaky DVD drive but I have now installed a different drive and am still getting the same message. I also tried a SATA DVD drive but it seems that the Windows 7 installation process didn't like (have drivers for) this interface

edit:I have previosuly managed to load Windows 7 64-bit RC on this PC but had some problems with stability so thought I would give the 32-bit version a go.

I notice that some people have got around this problem by burning the DVD at slow speeds and by using a USB drive to boot from; since I have successfully installed using this DVD, the former doesn't seem relevant and I don't have an 8GB USB drive available. I will try running MemTest86+ on the system on the off-chance.Any explanations / other suggestions . . . please . . . ?

ps - I have just downloaded a new copy of Windows 7 32-bit RC, burned it at 1x and have got the same unhelpful error message

A:Error code: 0x80070570 when attempting to install

Welcome surv1v0r.

Burn the iso again with imgburn @4x speed and try again!!

Good Luck

Read other 9 answers
RELEVANCY SCORE 66.4

well then, i think no one will ever able to solve my question ....

A:Cant install win 8 (error:0x80070570) on new tosiba laptop

How far are you actually getting because "when in the middle of installing" doesn't help much. Are you getting to the point where you can "delete existing partitions?" If so, are you wiping the drive clean (erasing all existing partitions) before proceeding?

Read other 7 answers
RELEVANCY SCORE 66.4

Hey Sevenforums,

About a year ago I decided to build my first computer. I did so and there was much rejoicing. That is until it started BSODing everywhere when I played video games or watched Netflix.

Coming to your forums I was encouraged to do a memtest, got new RAM, for a while the problem was fixed (provided to used only one stick on the MOBO) and there was much rejoicing.

Then the BSOD's came back. I believed it to be the motherboard (an ASROCK extreme3 Gen3 Z68) and so I went a purchase a new one. Unfortunately the Micro Center sales person sold me an mATX which I didn't even notice... but I'm attempting to do a fresh install of windows 64 bit professional.

At first I was getting an error that said I couldn't install windows on a GPT hard drive. After deleting all partitions using the Windows Install Interface, I was able to create a new partition and attempted to install and that's where I am now. Sitting here with this 0x80070570 error code. I've googled it but none of the solutions I've found were of any use.

Additionally, after attempting to boot my computer up post-installing everything to the new motherboard the computer wouldn't go to a splash screen. When I removed my GTX 680 (EVGA) card it went to BIOS and posted just fine.

Any help would be appreciated... Thanks!

Update: I attempted to use Disk Part in Command Prompt to clean all disks, but that didn't work, saying a clean is not allowed ont he disk containing the current boot. So I truly am stuck. I ha... Read more

A:Fresh Install (due to new MOBO) Error 0x80070570

Well, for anyone out there who finds this, I solved the issue. I ended up swapping the new motherboard with my old one, but changing the RAM. This resolved the issue and allowed me to install Windows cleanly with no errors. Not sure why...

Whether the new ram with the original mother board will prevent the BSODs... time will tell. Good luck, and sorry for the forum pollution.

Read other 1 answers
RELEVANCY SCORE 65.6

If you just want the solution page down .. it's in this blue

New shiny windows 7 disk arrives. ...... doesn't want to install ...

keep getting error message 0x80070570 when Windows 7 is expanding files:






Quote:
Windows cannot install required files error 0x80070570
The file may be corrupt or missing.. Make sure all files required for installation are available and restart installation.


Spend an hour googling .. people suggest RAM problems .. I know my RAM is good but spend an hour or two running MEMTEST ...

Then I see a lot of people reduced to trying to install from a USB key .... great .... borrow my neighbours 4GB Cruzer, follow instructions, ... and bork it in the process of not installing the OS.

So eventually I call Microsoft and speak to a very nice lady in India who runs me through a dozen or so workarounds for this .. I'm pressing control +F keys left, right and centre, taking out RAM sticks, disabling EVERYTHING in BIOS.

Always the same thing:






Quote:
Windows cannot install required files error 0x80070570
The file may be corrupt or missing.. Make sure all files required for installation are available and restart installation.


So after maybe two hours on the phone with her she decided to report the issue to the second line team. I'm told they will call me back today as they don't work weekends (all this took place Friday up til now).

EASY SOLUTION:

I don't wait weekends for answers (nor do I usu... Read more

A:0x80070570 Error Code on install - One Easy Solution

thanks for telling them , they're flooded with all sorts of setup issues (most of which are resolved with hardware removal)

Read other 9 answers
RELEVANCY SCORE 65.6

Hey guys, self taught and "usually" self fix but this one has me stumped. Wife has an Acer Aspire One Nav50 netbook running an Intel Atom Processor 1660.0 MHz, with W7 starter. She has had it a few years & like the rest it had started to slow down. I have a genuine ISO of W7 Home Premium mounted on flash drive in boot configuration that I have used on an older laptop that worked without a hitch so I know it is a good copy. Ran DBAN(beginning to think that was my mistake) and went to install 7. Everything goes good until it gets to % count up and 20 is as far as it ever gets. Let me list what I have done so far:

>ran check disk on the hard drive-no errors
>made a bootable flash drive w/memorycheck86 and ran it for 6 passes(around 4 hours) no errors
>decided to try new memory anyway, upgraded to 2 gig stick(only 1 slot, 2gig max)-no luck
>tried the "stop install before the error and go back to install w/o reboot" trick-no luck
>deleted the drives at advanced at beginning of install-no luck
>tried to format the install drive-no luck
>ran "disk part" from command prompt as described on this forum-no luck
>reset the bios to factory-no luck
>reset the SATA mode in bios from AHCI to IDE-no luck

Think I should go buy a lottery ticket tonight?

Been on this for 12 hours, is there anything that I have missed?
7 Forums has always been my "go to" for fixes, that's why I joined to post this!

Thank... Read more

A:Install error 0x80070570 on Acer Nav50 after DBAN

Is it possible you only ran the flash stick installer from Windows before and haven't yet relied on it to boot to install? It sure sounds like a bad installer.

Just in case try another ISO for your licensed version written to stick using the ISO download and MS tool from Clean Reinstall - Factory OEM Windows 7. The steps there will also assure you get and keep a perfect install, even for retail.

Set the SATA controller to AHCI, set HDD to boot first, trigger flash stick to boot using Acer F12 or F10 key at boot. Clean Install Windows 7

If that fails try DVD install using same tool to burn DVD.

Read other 2 answers
RELEVANCY SCORE 64.8

Hi there,

So I have spent the last few days troubleshooting the problem, I have tried most of the solutions I have found online, but still I get the 0x80070570 error at 14% of the install process. I have reformatted the hd prior to trying as well.

some random observations:
I have run hd diagnostics and everything passed
I notice that in the BIOS setup utility that there are 3 SATA HDDs listed though I only have the one 'internal one' and no peripherals
I have downloaded and burned (and burned to USB) the .ISO file about five times with the same result
I haven't tried removing RAM because I only have one chip (4 gb) and I assume I cant have 'no' RAM to proceed

As I am sure you can imagine, it is driving me absolutely crazy.

Any help would be hugely appreciated, even on Christmas Eve!

Thanks for reading,

Tathama

A:clean install failure (0x80070570 error) on a lenoveo t410s w ssd

Unplug all other HD's and peripherals,

Boot into BIOS setup to enable Legacy BIOS if present. Next check BIOS Boot order for an EFI Boot Disk and if present remove it, set DVD drive first to boot, HD second. Then set SATA controller to AHCI. Save changes and Exit.

Then boot into installer DVD or flash stick burned or written using tool and latest ISO for your licensed OS version here.

At first installer screen Press Shift + F10 to open a Command Box, type:

DISKPART
LIST DISK
SELECT DISK 0 (after confirming Windows 7 target HD #)
CLEAN
CREATE PARTITION PRIMARY SIZE=102400 (for 100gb partition, adjust as desired)
FORMAT FS=NTFS LABEL="WINDOWS 7"
ACTIVE
EXIT
EXIT

Next click Install Now, then Custom install to Clean Install Windows 7 to the partition you created. If it fails then report back at which step and the verbatim error message.

In addition read over these steps to understand the tools and methods which work best to get and maintain a perfect Clean Reinstall - Factory OEM Windows 7. The steps are the same for retail.

Read other 9 answers
RELEVANCY SCORE 62

I do a clean install. Delete all the partitions, make a new one, format.Then "Copying files" takes approx 1 second. Then it does to "Expand" and gives me the error.Exact message:"Windows cannot install required files. The file may be corrupt or missing. Make sure all files required for installation are available, and restart the installation. Error code: 0x80070570"

A:Error at "Expanding Files": Windows cannot install required files. 0x80070570

I resolved the problem I had. It appeared to be a memory chip. I do not know whether it is a bad chip or just a compatibility issue.I had 2.5GB of RAM: 1GB 800Mhz and the rest 512MB 688Mhz. I took out the 1GB and the install went through fine. Windows 7 is running just fine with 1.5GB of RAM on a 2.8Ghz Pentium D.

Read other 50 answers
RELEVANCY SCORE 60.4

I recently bought a new SSD ( Crucial MX100 512 GB)
and I wanted to install windows on it, but for the past couple days I've encountered the same error over and over.
Gyazo - cbdee771428da741b21b6b921a8230b5.png
I've burned the ISO on a disk and USB, both of them coming up with the same error. I've even tried a different ISO (Windows 7 Ultimate and Windows 8.1 Pro)
I have updated my bios and also unplugged and plugged back in my ram. I've practically tried everything that came up while googling this error.

A:Installing Windows Error 0x80070570

It's possible that the SATA drivers aren't recognized during the Windows 7 or 8 extraction portion of setup (In your BIOS may also need to be set with AHCI). Usually Load SATA drivers before actual install begins. May need to look for updates to the drivers at manufacturer's site of motherboard.

Make sure did it correctly look at these, something could be corrupt with ISO you made

http://www.eightforums.com/.../2227-create-bootable-usb-dvd-windows-8-iso.html

http://www.eightforums.com/.../18309-windows-8-windows-8-1-iso-download- create.html

Read other 11 answers
RELEVANCY SCORE 60.4

I keep getting error code 0x80070570
An unexpected error is keeping you from creating the folder. If you continue to receive this error,you can use the error code search to help with this problem

any suggestion to fix would be appreciated
Thanks
D

A:Need Some Help New To Windows 8 Error Code 0x80070570

When do you see this error message? Is it during install or while using Windows 8?

Read other 5 answers
RELEVANCY SCORE 59.6

I've seen a lot of threads about Error code: 0x80070570 here, but none of the solutions works for me.

I posted on /r/techsupport earlier today:

https://www.reddit.com/r/techsupport...boot_from_usb/

Where I had trouble getting into the windows installer. I managed to get the installer going, but now I am getting an error message during the installation:

https://gyazo.com/cc6818f7667da1c11a66f360a712a0d3
Error code: 0x80070570

This happened after I formatted my drives; during the installation. I've tried to take out my RAM 1 by 1, but with no luck.
Running Windows 7 Ultimate x64 on a self-built desktop computer. Installing Windows 7 Ultimate x64 with a Kingston USB-stick "burned" with Rufus. This is the ISO I am using:

Download Official ISO's of Windows 7, Windows 8.1 or Windows 10 legally and for free - TechFleece

I have no access to a different Windows computer, only a MacBook Pro Retina. Nor do I have a different USB-stick or drive, so solutions which no not require any of this is appreciated. I am not the most computer savvy guy either, so keeping it simple would be nice

Thanks in advance!

Read other answers
RELEVANCY SCORE 59.6

I am trying to install Windows 7 on an HP Slimline s5220y with a USB installer I made from a Windows 7 ISO (I made the ISO from a working Windows 7 DVD). At around 25% through extracting the files, I get an error message with the error code 0x80070570. Any help is appreciated

A:Windows 7 Installation Error code 0x80070570

Hello and welcome Cave mate I think personally although fiddly using this tutorial and invoking the ie.cfg removal tool would be far less problematical as long as you choose the correct version for which you have the activation code for.

Clean Reinstall - Factory OEM Windows 7 it does also give info on doing it with a stick anyhow.

Read other 5 answers
RELEVANCY SCORE 59.6

Hello:

I had to replace the motherboard, memory and power supply on my computer because the old board was failing. The Computer kept shutting off without warning and would not stay on.

When I try to install Windows Vista Business Full Install, I get the following message and code:

Recovery Disk

Windows cannot install required files. The files may be corrupt or missing. Make sure all files required for installation are available, and restart installation.

Error Code: 0x80070017

Windows Vista Business Full Install Disk (I bought the full install version on 8/8/10)

Windows cannot open the required file E:\source\install.wim. The file may be corrupt or missing. Make Sure all files required for installation are available, and restart installation.

Error Code: 0x80070570

The Hard Drive is formatted. Can someone please be so kind as to what I can do to correct this problem. I am pulling out what little hair I have left on my head trying to install Windows Vista Business, so I can have my computer back.

Thank You

Ray Ramos

Lindenhurst, NY.

E-mail: [email protected]
 

A:Windows Error Codes 0x80070017 & 0x80070570

Read other 7 answers
RELEVANCY SCORE 59.2

Hello,

I am trying to install Windows 7 on my ASUS laptop. I tried different types of harddisks but it still does not work. Also I did a memtest.

I am booting the intallation from a usb disk.

Here a picture of the error:

http://oi59.tinypic.com/710a5d.jpg

Thanks in advance!

A:Error installing Windows 7 - error: 0x80070570

How was the USB stick prepared? For Legacy BIOS use Windows 7 USB-DVD Download Tool
but for UEFI BIOS' you must use Option One from UEFI Bootable USB Flash Drive - Create in Windows and then boot the stick as a UEFI device.

Otherwise follow these steps to Troubleshoot Windows 7 Installation Failures - Windows 7 Help Forums

Read other 5 answers
RELEVANCY SCORE 58.8

Error 0x80070017

keeps coming up when I install my windows 7 disk. I've used two different disks and the same error occurs, though at different levels of completion. I've searched the forums and come to the conclusion that either my memory isn't good for this board, or it is the hard drive that i'm installing to.

When I start it hangs at 0% expanded and about two mins later it gets to about 72% expanded and then the error occurs. The first disk i used only got to 39%. I've ran a memory diagnostic and currently have no access to a USB boot disk.

A:Windows 7 ultimate x64 - Error 0x80070570 Asus P5b, q6600

This is almost always an installer error. Where did you get Win7? Check HASH or download another ISO, burn to DVD or write to flash stick using Windows 7 USB-DVD Download Tool.

Boot installer using one-time BIOS Boot Menu key given on first boot screen. Unplug all other HD's and peripherals.

If this fails, wipe the HD first with Diskpart Clean Command accessing DISKPART At PC Startup.

Next reset BIOS to defaults in BIOS setup, set SATA controller to AHCI to try install.

Next test your HD using maker's HD Diagnostic extended CD scan, then test your RAM - Test with Memtest86+ for 5-6 passes. Remove all but 2gb RAM to try install, then swap RAM.

Read other 3 answers
RELEVANCY SCORE 58.8

So, I faced this problem 2 years ago, yet, I can't solve it.

A few years back, I've got a new Toshiba Satellite C850-B797 laptop. It came with Windows 7 64-bit, few months later I forced to format it and install a new Windows; However, since that time, I'm locked out of ANY 64-bit version of Win.

Though, ANY 32-bit version of Win will install without problem (WHY??).

The error code is 0x80070570
I've searched the internet and even did my personal research, but with no luck.

It just stops at 17% while installing, and gives that error.

What I've tried:
- Installing from 4 different USB sticks. (Couldn't use CD/DVD, the driver isn't functional).
- Trying different USB ports both 3.0 and 2.0
- Trying different SATA modes, both IDE and AHCI.
- Swapping out and removing the RAMs.
- Wiping out the HDD many times even with dban.
- Trying many ISOs and different Windows versions (7, 8, and 10).

Out of all of that, 32-bit installs perfectly, but 64-bit is NOT.

Why? What is the problem?
Thanks in advance for any kind of help.

Read other answers
RELEVANCY SCORE 58.8

Hello,
I am working on a Dell Latitude D630 laptop. Intel Duo Core 2. Had Windows XP on it. Trying to install Windows 7 Ultimate (store bought). Tried to do a clean install. (Wouldn't let me upgrade from Win XP).

During installation, about 4 minutes into installation, I get the error
"Windows cannot install required files. The file may be corrupt or missing. Make sure all files required for installation are available, and restart the installation. Error code: 0x80070570"

I tried another copy of Windows 7 Ultimate, which I know is good. Same error.

I swapped the CD / DVD drive, and still get the same error.

I ran Memtest x86 and am getting A LOT of errors with the memory.

Here are my questions:
1) Is the bad memory causing this error?
2) I found one memory slot, directly on the bottom middle of the laptop (2 screws to remove the cover). Where is the other memory located? It has 2 memory modules in it, and I can't find the other one!
3) Is there anything else that could be causing this error?

Thanks alot!

Ox

A:Windows 7 Ultimate Installation Error: 0x80070570... Bad Memory?

SOLVED! The memory was the problem. Also, the other memory module is underneath the keyboard.

Thanks!

Read other 1 answers
RELEVANCY SCORE 58.8

So, I faced this problem 2 years ago, yet, I can't solve it.

A few years back, I've got a new Toshiba Satellite C850-B797 laptop. It came with Windows 7 64-bit, few months later I forced to format it and install a new Windows; However, since that time, I'm locked out of ANY 64-bit version of Win.

Though, ANY 32-bit version of Win will install without problem (Why?).

The error code is 0x80070570
I've searched the internet and even did my personal research, but with no luck.

It just stops at 17% while installing, and gives that error.

What I've tried:
- Installing from 4 different USB sticks. (Couldn't use CD/DVD, the driver isn't functional).
- Trying different USB ports both 3.0 and 2.0
- Trying different SATA modes, bith IDE and AHCI.
- Swapping out and removing the RAMs.
- Wiping out the HDD many times even with dban.
- Trying many ISOs and different Windows versions (7, 8, and 10).

Out of all of that, 32-bit installs perfectly, but 64-bit is NOT.

Why? What is the problem?
Thanks in advance for any kind of help.

Read other answers
RELEVANCY SCORE 58.8

So, I faced this problem 2 years ago, yet, I can't solve it.

A few years back, I've got a new Toshiba Satellite C850-B797 laptop. It came with Windows 7 64-bit, few months later I forced to format it and install a new Windows; However, since that time, I'm locked out of ANY 64-bit version of Win.

Though, ANY 32-bit version of Win will install without problem (WHY??).

The error code is 0x80070570
I've searched the internet and even did my personal research, but with no luck.

It just stops at 17% while installing, and gives that error.

What I've tried:
- Installing from 4 different USB sticks. (Couldn't use CD/DVD, the driver isn't functional).
- Trying different USB ports both 3.0 and 2.0
- Trying different SATA modes, both IDE and AHCI.
- Swapping out and removing the RAMs.
- Wiping out the HDD many times even with dban.
- Trying many ISOs and different Windows versions (7, 8, and 10).

Out of all of that, 32-bit installs perfectly, but 64-bit is NOT.

Why? What is the problem?
Thanks in advance for any kind of help.

A:Error 0x80070570 when installing ANY 32bit version of Windows

Stupid me....
The title says: "Error 0x80070570 when installing ANY 32bit version of Windows"
But my problem is with 64bit

Just changed it now.

Note: if you are still confused, my real problem is with 64bit versions.
The correct title is: "Error 0x80070570 when installing ANY 64bit version of Windows"

Read other 1 answers
RELEVANCY SCORE 58.4

Guys i have this problem with my Toshiba laptop:
Several days ago my com crashed..when i started my computer on the very beginning on start up screen when it says windows is starting i get a 1second blue screen with some saying and my laptop restarts by it self.
So,ok i have Windows 7 Ultimate installation dvd and i tried to install it,everything goes well untill on the second line of the very beginning of windows installation 98% i get this message Error Code:0x80070570
I've read some forums people were saying that this could be a RAM problem,so,ok my toshiba have 2 RAMS x 2 Gb..so i taked out 1 tried to install-same error,putted in another slot-same error,replaced and putted my other Ram Memory in the slots same again.
So,is there any solution how to fix this?i can see in bios that bios is reading my HDD,not sure if its working,does that mean that if BIOS is recognizing my Laptops HDD that works 100%???Could be something else causing that error code mentioned above??
Please someone respond and help me...THANK U IN ADVANCE

A:WINDOWS 7 Ultimate installation Error Code 0x80070570 problem!!!

Follow these steps exactly to Clean Reinstall - Factory OEM Windows 7.

Did Ultimate come with the laptop? Install only the licensed version using the Product Key on COA sticker.

Wipe the HD before install with Diskpart Clean Command

Read other 9 answers
RELEVANCY SCORE 58.4

While i am installing Windows 7 Home Basic 64 Bit on my SONY VAIO VGN-NW350F laptop i am getting the following error .

Windows Cannot Install Required files. The file may be corrupt or missing. Make sure all files required for installation are available, and restart the installation. Error code: 0x80070570.

I am getting error at installing Windows level.....while Expanding Windows Files at 5% it struck.

Formatted total HDD and given new partitions, No use

I have tried with 3 Different Genuine Windows 7 Disks but getting same problem every time.

Please provide me workaround or good solution to fix the problem.

Thanks In Advance
Shankar
9986680858

A:Getting Error code: 0x80070570 while installing Windows 7 Home Premium

Work through these steps for Overcoming Windows 7 Installation Failures - Windows 7 Help Forums

Read other 3 answers
RELEVANCY SCORE 54.8

OK, so I'm having this issue with Lenovo G500 (500+8GB SSHD, 4GB RAM, UEFI).
I'm trying to install Windows 8.1 (x64) on this laptop for three days now.
I tried different methods for creating a bootable USB drive (Rufus, WinToFlash, manual), in both UEFI and BIOS (Legacy) modes, both got me a 0x80070570 (missing or corrupt file).
I have the official ISO from Microsoft DreamSpark and I tried around three other downloadable images of Win8.1 in both modes, all gave me the error at some point of Step2. I also tried various UEFI configurations, SATA compatibility mode etc.

Please don't point me to this site's tutorials (create bootable drive and doing a clean install), tried them all with no success.

I also can't remove RAM sticks (some suggest that), my computer is still under warranty and I want it to stay that way.

Thanks in advance.

A:0x80070570 on 8.1 Clean install from USB

8GB ssd ?

Read other 20 answers
RELEVANCY SCORE 54

I'm trying to install vista home premium on my pc. I get to 100% on the "expanding files" part of the installation, and this stupid f#&@ing error message pops up and says error code 0x80070570 windows is missing some file or something. This isn't a pirated copy, it isn't scratched, my hdd is fine, and my dvd drive is fine as well. PLEASE HELP ME!

A:0x80070570 during genuine vista install... PLEASE HELP!

is this an upgrade, oem, or full retail version of vista? Is it 32 or 64bit? Is it basic, business, premium, or ultimate verstion of vista?

What is currently installed on the computer? are you trying to do a clean install or upgrade?

Read other 4 answers
RELEVANCY SCORE 54

Hi heroes,
I can't install win 7 on my brother's laptop. error 0x80070570, file missing or corrupted.
I've seek solution on the net but nothing seems to work.
Laptop decription: ACER Inspire 7250, AMD proc. 64bits,8 Go RAM, HDD 500 Go, 3 partitions : 1.PQSERVICE(OEM) with windows and drivers 2.System reserved 3.Principal
What I tried (I used 8Go USB card with windows usb download tool):
- format principal drive and install clean windows -> format ok, install failed at 4% code 0x80070570
- use (shift) + alt + F10 at startup to reset at factory default -> nothing happened
- download another iso of windows -> same error
- try another version of windows -> same error
- verify integrity of all memories -> errors found on the HDD clusters moved in quarantine -> same error
- plug the HDD on my desktop and try install windows -> same error
- format and delete all partitions on the HDD, except the RECOVERY OEM reserved and create new clear partition -> same problem
No more ideas... please help

A:Unable to install win 7 (code 0x80070570)

Try another flash stick or DVD using the ISO and tool to burn to disk/stick in Clean Reinstall - Factory OEM Windows 7 which steps will assure you get and keep a perfect install. Since Acer Recovery will not run after a Clean Reinstall to C, delete all partitions during the booted install.

If this fails work through these steps for Overcoming Windows 7 Installation Failures - Windows 7 Help Forums reporting back any failure by when it happened and any error or other behavior.

If these fail test your hard drive using the maker's HD Diagnostic extended CD scan, followed by another Disk Check run from installer's Command Line on the full disk partition you created.

Read other 7 answers
RELEVANCY SCORE 52.8

I'm at my wits end here and I have no idea what to do next. I like to think of myself as someone who can solve most computer related problems but this has me stumped. I've browsed through the forums and tried all the solutions I can find [which I'll mention shortly] but it has all been to no avail.

In short the story is I had a decent system running on an asrock mobo and the mobo failed. So i bought the asus board to replace it and instead of doing a repair I wanted to run a clean install. It's been nothing but headaches since.

Specs:
Asus P7P55D-E Pro [using Marvell 9123 Sata3 controller] with i5 760
128GB Plextor Sata3 SSD
8GB Mushkin blackline ddr3 [currently at 1333MHz]
Windows 7 Ultimate x64 on a kingston 8GB usb key

What I've tried:
-Completely wiping the SSD with killdisk
-installing on an unallocated partition
-partitioning the drive then installing
-putting the SSD in each of the two marvell ports
-AHCI mode and IDE mode
-rebuilding the install file on the USB key [twice; once manually and once using the win7 USB DVD download tool] [I unfortunately no longer have my physical CD... though I can still find my Vista CD, not that it does me any good]
-putting the SSD in the intel SATA2 port
-installing the marvell drivers first [I've tried 3 drivers: Marvell 9123-9120_V1001042 from asus website; Marvell 9123-9120_V1001032 from mobo driver cd; marvell_9xxx_1.2.0.1019 from marvell website]
-installing with 2GB ram... 4GB ram... and the full 8GB ram
-plugging the USB key... Read more

A:0x80070570 on install of Win7 x64 on Plextor SSD Asus P7P55D-E Pro

So I'm an idiot sometimes... And I forget about the simple solutions. I didn't mention that I had 2 HDDs plugged into the SATA2 ports... frankly I forgot about them myself.

When I was looking at my mobo I noticed them again. I unplugged them. I ran the install again. It worked flawlessly. It just goes to show...

Read other 1 answers
RELEVANCY SCORE 52.8

First timer here, so please bear with me. Any help you can offer is MUCH appreciated!

Some of the files on my SD card have changed file extensions and appear corrupted (the modified dates are wonky and the file sizes are off). For example, a file that was formerly IMG_3324.JPG is now MG_3324J.PG, and I can't open, copy, or rename the file. When I try, I receive Error 0x80070570: The file or directory is corrupted and unreadable.

I have gone into Properties>Tools>Check. I receive the following: "We found errors on this drive. To prevent data loss, repair this drive now." However, when I click Repair Drive, I just receive the error, "There was a problem scanning and repairing this drive..."

Most of the files on the SD card are readable and work just fine. I was able to copy them to another location; however, there are about 60 or so corrupted files that I would like to repair (I don't want to lose the pictures!).

Also, any ideas what causes these errors? I want to make sure I don't repeat this in the future :-/

I'm running Windows 10, and the SD card is a Dane-Elec Proline 4GB card.

Tech Support Guy System Info Utility version 1.0.0.4
OS Version: Microsoft Windows 10 Home, 64 bit
Processor: Intel(R) Core(TM) i7-6500U CPU @ 2.50GHz, Intel64 Family 6 Model 78 Stepping 3
Processor Count: 4
RAM: 8084 Mb
Graphics Card: Intel(R) HD Graphics 520, 1024 Mb
Hard Drives: C: 237 GB (154 GB Free);
Motherboard: ASUSTeK COMPUTER INC., K501... Read more

Read other answers
RELEVANCY SCORE 52.4

I'm trying to move music onto my micro SD 32gb card but an error msg keeps coming up of 0x80070570 and only xfers 29 of my 3021 songs.

Pls help
 

A:error 0x80070570

Move or copy? Try moving (or copying) smaller groups of files, maybe 3 or 4 folders at a time. This will give you a better insight as to whether a certain file is causing the error (ie. corrupted file), or if it's the micro card, with a bad spot or something on it (although this is very rare on an SD card).
 

Read other 1 answers
RELEVANCY SCORE 52.4

I am using a Intel Core Processor with Windows 7 with a business server. When I am attempting to copy a video (file extention .dvr) from a Micro SD card I recevie the following error:

"An unexpected error is preventing the operation. Make a note of this error code, which might be useful if you get additional help to resolve this problem:
Error 0x80070570: The file or directory is corrupted and unreadable"

This video file is very important and I need to be able to view and save on my computer. If anyone has any idea how to view this file or fix the problem it would be greatly appreciated.

Thank you in advance for your help.
 

A:error: 0x80070570

Read other 7 answers
RELEVANCY SCORE 52.4

Hi this is my first post

I have been usuing bitcommet to download some tv swhows and a few movies on my pc. things have always been fine...after i download them i transfer them over to a nexstar external hard drive. recently tho i have been getting an error when transfering files
The error is:

An unexpected error is preventing the operation. Make a note of this error code, which might be useful if you get additional help to resolve this problem:

error 0x80070570: The file or directory is corrupted and unreadable

Is there a simple way to fix this? I am not really good at working with computer but i follow direction well.
Thank you to all the people that take the time to read this and thank you for any help i may receive

A:Error 0x80070570:

Have a read here: http://forums.techguy.org/windows-vista/75...0x80070570.html

Read other 1 answers
RELEVANCY SCORE 52.4

hi all i have been getting a error message when transferring files to a flash drive the transfer get almost done and then 0x80070570 error can any on help thanks

A:error 0x80070570

Try:
http://windows.microsoft.com/en-US/w...sked-questions

Read other 2 answers
RELEVANCY SCORE 52.4

Hello,
I keep getting this error when I try to create or delete a folder. I also cannot use applications which create temporary folder such as WinRAR.
The error says this:
"An unexpected error is keeping you from creating the folder. If you continue receive this error, you can use the error code to search for help with this problem.
Error 0x80070570: The file or directory is corrupted and unreadable."
I tried all the possible options to solve this problem except for reinstalling the Windows.
Please help!

A:Error 0x80070570

I looked that up- It's an old error - From Vista days. Does this happen with WinRAR from every folder? It sounds like a permissions thing, but I would not mess with folder permissions in Windows 8 unless I had to. But you can make a "downloads" folder, and set the permissions to "Administrators" for that and see if it still happens. From there we can figure out were to go.

You can also try "unlocker" - You can get it at Major Geeks. It detects as a virus in some AV but it is safe. It has to take ownership of the object you use it on, sometimes AV apps detect that ability as a virus.

I dug around more, and it seems like this is a common problem when INSTALLING Windows 7 (And Probably Windows 8 as well as it uses some of the same installation steps).

The best I can find, is that you have some kind of Install process that never completed right, and it's still running, locking out access to the drive. That just from the bits and pieces of the discussions I found. There is no MS Technet discussion of it. Microsoft like to name and number these errors, just to identify that there have been 80,070,570 (80 MILLION) kinds of Windows Errors. They assign a 0x800... number but never tell you what the frell it MEANS.

Read other 1 answers
RELEVANCY SCORE 52.4

I've had this flash drive for about a year and a half or something like that, and when I go to open a specific folder on it, a message comes up that says, "The file or directory is corrupted and unreadable. Error 0x80070570." I am able to open any other file fine except this one. Is there anyway to fix it?
 

A:Error 0x80070570

What operating system do you have? Windows 7?
 

Read other 3 answers