Over 1 million tech questions and answers.

How much memory can i fit in a Tecra M10-1CN?

Q: How much memory can i fit in a Tecra M10-1CN?

How much memory can i fit in a Tecra M10-1CN and should it be in two 200 Pin SO DIMM DDR2 PC2-6400 800MHz modules

RELEVANCY SCORE 200
Preferred Solution: How much memory can i fit in a Tecra M10-1CN?

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: How much memory can i fit in a Tecra M10-1CN?

Hi

The memory expand possibility depends on the chipset of the motherboard
The Tecra M10 supports the Mobile Intel(R) GM45 Express chipset? and this chipset supports max DDR2 800MHz 8GB RAM

So first of all you can use 2 x 4GB RAM modules and secondly the memory speed is limited to 800MHZ.

Even if you would use faster modules i.e. 1033Mhz the FSB would clock down the speed to 800Mhz? so it?s not worth to use faster modules than DDR2 800Mhz

Read other 6 answers
RELEVANCY SCORE 49.6

Hi all,

I have a Toshiba A11-11G with standar memory : 4,096 (2,048 + 2,048) MB with Tecnology : DDR3 RAM (1,066 MHz)

I would like to upgrade to:
8,096 (4 + 4) MB with Tecnology : DDR3 RAM (1,333 MHz)

Could it be possible?
Did you recommend me?

Thanks and Regards
David

A:Main Memory for Tecra A11-11G

According notebook specification your notebook can be upgraded up to 8 GB. What you should do is to use tested and compatible RAM modules.
Compatible 4 GB RAM for your Tecra has part number PA3677U-1M4G.

Read other 1 answers
RELEVANCY SCORE 49.6

Hi all
This is my first post here - so greetings to all.
This problem is about memory compatibility with several Tecra A11 laptops.
I have two - a A11-12F, and a A11-1F4.
Both computers run well with a pair of Kingston 1333 2x2gb=4gb ram sticks.
Recently I have bought two separate pairs of 2x4gb sticks - neither works - both reboot after seconds, and they don't get more than 10 seconds into memtest before rebooting.
The first pair - which I had bought but now returned - were Samsung 1600 2x4gb. I don't have the model number because they are now sent back. I thought they were too fast or incompatible.
So I bought a pair of Kingston 1333 KTD-L3BS/4G - hoping they would run because my other Kingston 1333 sticks work (even though the Toshiba specs say 1066). Again they did the crashing and rebooting after seconds.
What are the varibles here?
I can't get these specs from Toshiba, and various ram sites like MrMemory or Crucial recommend different things:
1.35v or 1.5v?
C11 or C9?
R1 or R2 (what kinds of chip layouts on the sticks?)
I thought it might be bios - maybe they can't recognise 8gb - but I have having trouble with the Windows-based bios updater, and it didn't work.
I am a bit perturbed now, because I have now bought 2 separate memory pairs, and I really thought the Kingstons would work.
Any suggestions would be appreciated.
Please don't simply recommend that I buy memory of a Toshiba part number, because I'm sure a major-brand ram will work.
Thanks ... Read more

Read other answers
RELEVANCY SCORE 49.6

Greetings,

How many memory slots there are available? And how much memory can it handle? And what memory it uses?

Message was edited by: topini

A:What memory Tecra 8200 uses

Hi

I found this page about memory modules for Tecra 8200:
http://www.orcalogic.co.uk/asp/prodtype.asp?prodtype=5841&ft=m&st=3

It looks like the Tecra 8200 would support max. 512MB and you could use the 144-Pin PC133 SODIMM or 144-Pin PC100 SODIMM memory modules!

Hope I could help a little bit!

Read other 2 answers
RELEVANCY SCORE 49.6

Hi All,

Have ordered some RAM to upgrade my Toshiba Tecra Z40-A, but can't for the life of me find anything online of where to insert it.

I have installed RAM previously under the keyboard (couple of clips holding it in) and on others, a small covering on the bottom, but the Z40 doesn't seem to have anywhere easily accessible.

Has anyone upgraded RAM on the Z40? Or is this a big no no, due to warranty?

Thanks,
Lance

A:Tecra Z40-A - Upgrading Memory (RAM)

Memory upgrade on this Tecra model is a bit complicated and, I think, should not be done by notebook owner. For some models Ram upgrade can be done by notebook owner and exact instructions how to do this is offered in user?s manuals document, but not for your Tecra.

For full access to RAM modules bottom cover must be removed and it can be done by service people only. If you do this alone you can cancel valid warranty.
I recommend you to contact nearest Toshiba service provider in your country and ask for help or advice.

Read other 2 answers
RELEVANCY SCORE 48.8

I'm working on a Tecra 8100 laptop for a friend. Machine doesn't seem to recognize memory installed in Slot B at all. Is there a trick in the BIOS to force it to rescan or am I simply looking at a broken slot? It looks ok visually and the clips seem sound .....

A:Tecra 8100 not seeing all installed memory

You cannot force anything. Either it works or not.
Try to start notebook with RAM placed in slot B only.

Anyway, if you use compatible RAMs and if this was worked before I believe slot B is defective.

Read other 2 answers
RELEVANCY SCORE 48.8

Hello!

How to remove the memory module?

Get the following message and for me this means that one of the modules is broken:

Memory Error
Address = 00034000H
Read Date = 28034000H
Write Data = 00034000H

For my opinion the computer should boot again when I remove the broken memory slice?

Cheers Australia

A:Tecra R10 - How to remove memory module?

Hi

You can remove easily the memory modules.
I think the bay is placed at the bottom of the unit.
You have to remove the screw securing the bay and you will get a access to the module.

Here is a video how to do this on another notebook Satellite L500. But the procedure is not very different on Tecra R10
http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=81

Hope this helps a little bit

Read other 3 answers
RELEVANCY SCORE 48.8

Hello,

Can i install 16GB Ram in my Toshiba Tecra R950-104?

Currently i have 8GB and i would like to replace the existing 2x4GB with 2x8GB.

Best regards,

LRP

A:Tecra R950-104 - Memory Expansion

Hello

According notebook specification your Tecra can be upgraded up to 32GB and you can use 4 X 8GB RAM modules.
Compatible 8 GB RAM modules have part number PA5037U-1M8G.

Read other 2 answers
RELEVANCY SCORE 48.4

My Tecra R840 will not recognize USB Memory sticks. USB works fine with USB hard drives and USB wireless mouse. Help! Any ideas? Many thanks

A:USB Memory Stick not recognized on Tecra R840

Have you tested t with different USB sticks and connected to different USB ports?

Read other 5 answers
RELEVANCY SCORE 48

Hello,

I jsut installed 4GB of RAM on my Tecra A9 PTS52E; but Windows 7 tells me it can only use 2.99 GB of RAM. In order to get more out of the memory I read that I have to enable "memory remapping" in my BIOS. But where do I find that? I have BIOS version 2.10-WIN installed... If I'm not mistaken this is the most recent version for my model...?


Thanks,

Jan

A:Tecra A9 PTS52E - Enable BIOS memory remapping

If you installed 32bit Windows 7, you won't get more than 3GB due to 32bit addressing limitations.

If you have 64bit Windows 7, the 1GB is probably being used by the graphics chip (GPU) as Video RAM.

Read other 2 answers
RELEVANCY SCORE 48

Hi,

I have a Tecra 8200 p3 (850 i think) that currently has 2x 128MB RAM.

The laptop only registers 128MB, so I think one of the sockets may be faulty.

I understand the maximum memory the tecra 8200 will address is 512MB, but can this be in a single Dimm, or must it be in 2x256?

Thanks

Ian

A:Tecra 8200 recognizes only one 128MB memory module

Hi

You can use 2 x 256MB memory modules 144-Pin PC133 SODIMM or 144-Pin PC100 SODIMM

Best regards

Read other 1 answers
RELEVANCY SCORE 48

My Tecra R850-11U has 8GB (2x 4GB) memory inside. I am running W7 professional 64bit and the machine only shows 4GB as memory.

I allready upgraded the bios, but the bios also shows 4GB. I have 2 banks of original samsung memory in it; changed one to an kingston bank but it still doesn't show more than 4GB.

How can i solve this problem?? I like full memory

A:Tecra R850-11U doesn't recognise full memory

The chipset supports 8GB RAM so you should be able to use the 8GB.
But if the BIOS does not recognize the 8GB RAM then one of the modules could be faulty or not compatible with another module.

This is only and one plausible explanation for me

Read other 4 answers
RELEVANCY SCORE 47.2

Hello all

I need help with some issue:
My system says that I have 2,66GB RAM available for applications, services etc. The rest of it (between 1,1 and 1,3 GB RAM) is shared and reserved for the graphic card. I searched for a way to reduce it via BIOS (how it normally works), tried an update for the bios hopping that it would add this feature. But that wasn't the case.

I can't understand why Toshiba doesn't allow his customers to modifity this setting!
I can understand to put such a setting by default, but also giving an option for advanced users to modifiy this setting.

2,66GB RAM are not very much and I often need more than that... 500MB more RAM for sys would be really nice.
And 64bit OSs are currently not supported in our company.

So does anyone know a way to reduce the shared memory to e.g. 500MB?

My system specs:

Windows 7 Pro SP1 (32bit)
Modell: TECRA R850
Serialno.: 7B042670H
Partno.: PT525E-03E00KGR

Thanks in advanced for your answers!

null

A:Tecra R850 - How can I reduce the shared memory of the graphic card?

As far as I know shared memory works automatically and notebook user cannot control it.
It is nothing new and the same principle is on all Toshiba notebooks.

Sorry but there is nothing to do about it.

Read other 2 answers
RELEVANCY SCORE 41.6

I possess a tecra A10 complete with Windows Vista Business installed (and backed up to an image file using Easeus Todo backup


However I also have access to a Tecra M10 which came with no operating system, although the COA sticker (product key) is likewise for a windows Vista Business.


My question is: would my Windows Vista Business back up from the A10 work on the M10 (ie would it load onto the M10 hard drive and then work properly

If anyone can advise on this matter I would be appreciative please

Best wishes
Ian

A:Can I use Tecra A10 OS disk to install OS on Tecra M10?

At first I must say that Toshiba recovery image is created for each notebook model separately and it is 100% created to work on specific model. Why?
Every notebook model has different hardware platform and all drivers, tools and utilities for certain model are part of recovery image. These recovery images are also tested.

Generally speaking if both models have identical hardware platform (hardware parts) it can be used.

Read other 4 answers
RELEVANCY SCORE 38.4

Dear forum
The above says it all really.

I see the two look similar, but one is smaller. Are these two models different in other ways please.
Ian

A:Difference between Tecra A10 and Tecra M10

Of course the both notebooks are different.
There are different Tecra A10 models and there are different Tecra M10 units.

For example:
Tecra *A10-13B* supports an Intel Core 2 Duo P8400 2,26 GHz CPU and Intel GM45 chipset.

Tecra *A10-1D2* supports an Intel Core 2 Duo T9600 2.80Ghz CPU and Intel GM45 chipset

You can find details about different discontinued notebook models here:
http://www.toshiba.eu/discontinued-products/
Then you can compare all the hardware parts.

Read other 7 answers
RELEVANCY SCORE 32.4

---------------
Display Devices
---------------
Card name: NVIDIA GeForce 8600M GT
Manufacturer: NVIDIA
Chip type: GeForce 8600M GT
DAC type: Integrated RAMDAC
Device Key: Enum\PCI\VEN_10DE&DEV_0407&SUBSYS_15151043&REV_A1
Display Memory: 2028 MB
Dedicated Memory: 237 MB
Shared Memory: 1791 MB
Current Mode: 1920 x 1200 (32 bit) (62Hz)

------------------
System Information
------------------
Time of this report: 4/22/2008, 14:37:30
Machine name: NICK-PC
Operating System: Windows Vista™ Ultimate (6.0, Build 6001) Service Pack 1 (6001.longhorn_rtm.080118-1840)
Language: English (Regional Setting: English)
System Manufacturer: ASUSTeK Computer Inc.
System Model: G2S
BIOS: Default System BIOS
Processor: Intel(R) Core(TM)2 Duo CPU T7700 @ 2.40GHz (2 CPUs), ~2.4GHz
Memory: 4094MB RAM
Page File: 1506MB used, 6857MB available
Windows Dir: C:\Windows
DirectX Version: DirectX 10
DX Setup Parameters: Not found
DxDiag Version: 6.00.6001.18000 64bit Unicode

A person in my thread here: http://forums.worldofwarcraft.com/thread.html?topicId=5784544444&postId=59801079620&sid=1#24

said:

That doesn't look right , my 8800GTS 512 displays

Memory:512 MB
Dedicated Memory: 512 MB
Shared Memory: 512 MB
Could you have bad videocard memory? Or maybe reinstal direct X? Click to expand...

So I'm not sure where to start and I'm hoping someone here can point me into the right direction as to what it is I need to do to fix this problem I've been having wit... Read more

A:Display Memory,Dedicated Memory,Shared Memory not consistant

Read other 6 answers
RELEVANCY SCORE 30.8

Hello,

we are encountering unusual problems with one of our Tecra devices.

Background info:

(The Laptop is used mostly in docked mode).

Occasionaly the screen won't turn on (laptop aswell as ext. monitor) while the laptop is used in dock-mode when the system is powered on by the user.

The user is also facing this issue, when the device is used outside the dock (eg. presentations) and reputting it into the docking station.

As said, the issues arrive occasionaly and we can't spot the problem.

Things I've already did:

- Update BIOS/UEFI to newest version
- Check multiple BIOS/ Windows settings e.g. Power-Settings -> disabled most of them that could cause this weird behavior
- Checked display drivers (Intel) and updatet them to the newest (no beta drivers)

The solution now exists of powering off the device via hard reset (pressing the power button for multiple settings), restarting the system and then putting it back into the docking station.

As you can imagine, this problem is very frustrating to us when the user has worked on something important and hasn't saved his progress before leaving meetings, because he knew he will be at his office, putting his device back in, but nothing happens and we have to hard reset it.

I appreciate any kind of help.

Best regards,

-user1337

Read other answers
RELEVANCY SCORE 30.8

hi, it is possible to have a functionnaly laptop upgrade with win10
TECRA S11-162 PTSE3E
or it is definitively dead ...

it is easy and no time eating for upgrade windows ?

thanks

Read other answers
RELEVANCY SCORE 30.8

Hi,

I'm trying one of this popular caddy's that allows me to put a second hard drive in the optical slot bay, I use a Sata to Sata adapter, so there is not really an adapter besides connecting properly:

[http://www.akasa.co.uk/update.php?tpl=product/product.detail.tpl&no=181&type=Enclosures&type_sub =2.5%20Enclosure&model=AK-OA2SSA-BK]

My problem is with Toshiba BIOS that is expecting a ODD device in that Sata port and cames out with a "CD-ROM error", disabling the Sata port.

I have a workaround, if I start the PC, after BIOS post with anything in ODD bay, after starting Windows, I insert the second HDD in the ODD bay, go to "Windows Device Manager" do a "Check for hardware changes" and voil?, the second HDD is working fine, to me this proves a BIOS limitation.

Is there any help, a Beta BIOS or something else, I have the last BIOS 3.00 for this machine installed.

A:Tecra M10-17U use second HDD in the ODD bay

Please check this thread:
http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=39412

It seems that Tecra M10 does not support an select bay which would allow you to use an 2nd HDD instead of ODD.
As far as I know select bay is supported on Tecra M1, M2, M3, M4, M5, S1, S2

Read other 7 answers
RELEVANCY SCORE 30.8

Hello,

do you know, if it possible to install a SSD Driver for my notebook?
And if yes, which manufacturer/brand you would recommand?
I want to install Win7 Prof - Anything to take care of? Drivers, firmware, BIOS Version etc...?

Thanks for tips in advance.

kind regards

Peter

A:Can I use SSD for Tecra A8

Generally speaking it should not be a big problem to use an SSD instead of an common HDD.
The notebook supports the SATA interface and you have to use an 2.5? SATA SSD drive.
I cannot recommend any specific brand but in some very rare cases it could be possible that you will need to update the SSD firmware providing by an SSD manufacturer?

Read other 2 answers
RELEVANCY SCORE 30.4

We bought a Crucial M550 256GB disk and want to replace in a Toshiba Tecra Z50-Av1

We do not want to make any transfer of data or cloned.
We want to do a clean install with Windows 8.1
The BIOS recognizes the SSD

But when you install Windows 8.1 does not detect any disk connected to the unit and requested additional drivers. Windows not detect drive

https://www.dropbox.com/s/mlvk6v3lxzi1rrh/2014-05-04%2009.47.18.jpg
https://www.dropbox.com/s/fr2eo5l9xonaoln/2014-05-04%2009.48.59.jpg
https://www.dropbox.com/s/8usxog8wm06funr/2014-05-04%2010.06.09.jpg

i too test with lasted version of this driver (old F6 in boot to locate hdd driver)

https://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=23496&lang=eng&wapk w=f6flpy-x64.zip

and with toshiba package
http://support.toshiba.com/support/viewContentDetail?contentId=4004211
you can see than i have 3.20 version of BIOS. interestingly I see that the last one is the Toshiba has released version 3.1

But always the drive CRUCIAL is not reconized by the boot instalation of windows

The problem is similar with ubunto, kubuntu, .... the drive is detected with the BIOS but not for the OS.

any help?
Thanks

A:Tecra Z50-A-11V: New SSD but Win 8.1 does not detect it

Hi

Did you solve this issue?
Could you install the Windows 8.1 system on this SSD drive?

I think the additional driver installation while setup procedure isn?t necessary since Win 8.1 should already contain the essential drivers.
From my point of few there could be an compatibility issue (maybe SSD firmware update would solve this).

How about the usage of other SSD drives? Do you have the same problem using other SSD drives from other manufactures?

Feedback would be appreciated.

Read other 1 answers
RELEVANCY SCORE 30.4

Hello,

unfortunately the letter S got loose from the keyboard of my laptop. The plastic retainers came off with it and are still attached to the key pad. After some research on the internet and closer inspection i saw that the metal hooks for the plastic retainer seem twisted and therefore i was unable to reattach the key pad.
Any advice how to fix the problem? My fear is that i would have to exchange the whole keyboard?

Greetings,

Michael.

Read other answers
RELEVANCY SCORE 30.4

Dear forum members

The above laptop turns on but does not boot. The power light flashes amber twice and then green.

Please does anyone know what might be be issue in this case.

Please does anyone know if this particular light flash sequence indicates anything in particular.
Any help would be greatly appreciated
With thanks
Ian

A:Tecra A10-16D does not boot

Does the same happen when you remove battery and start notebook with AC power supply only?

Read other 4 answers
RELEVANCY SCORE 30.4

For the graphics card on Tecra S1, is the mother board attached to it so that it cannot be seperated? If so, how much would it cost to replace the board? Thanks for the help~
 

A:Question about Tecra S1

About $75 to $150, used. Much more new. Better to buy a better laptop. Or lurk on eBay until you see the right package.
 

Read other 4 answers
RELEVANCY SCORE 30.4

Hi,

I would like do a multiboot XP / 98 on a TECRA A11.
Do you think it's possible.
Will I have some drivers dysfonction?

Thanks for answer !!

A:Tecra A11 - Win XP and Win 98 multiboot

Well, Win XP installation should not be a big problem because the Win XP drivers seem to be available on Toshiba European driver page.

But Win 98 might be a problem here since its not supported and the drivers are not available? you will need to search for such drivers at your hand and I think this might be a painful time? I doubt you will be able to get Win 98 drivers because this OS is really, really old.

I would recommend installing the Win 98 only using Virtual Machine (VM) http://en.wikipedia.org/wiki/Virtual_machine
or Virtual PC
http://en.wikipedia.org/wiki/Windows_Virtual_PC

This is very easy? running Win XP you can open virtual PC or VM and could start the Win 98

Read other 1 answers
RELEVANCY SCORE 30.4

Hi, could someone help me find the right driver for the wireless/wifi driver on my Toshiba Tecra A3X.

Model No.PTA3XE-01C00PEN

SERIAL NO. 56042981H

I am using Windows XP.

Thanks.

A:Need Wi-Fi driver for my Tecra A3X

No problem.
Go to: http://www.toshiba.eu/innovation/download_drivers_bios.jsp

Choose:
-Archive
-Tecra
-Tecra A series
-Tecra A3X
-PTA3XE
-Win XP

Now you will get all drivers for this notebook model

Read other 2 answers
RELEVANCY SCORE 30.4

Hi,

I'm looking for how to set the asset tag information int the smbios of a toshiba tecra M11 laptop ?
I have found this post LINK:[http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=40167] but the tool assettag.Exe don't keep the tag after reboot.
Any idea please ?

A:Tecra M11 and asset Tag

I don?t know if you have European notebook model but here in Europe this tool is not available for customers and this stuff must be done by authorized service provider.

If you want you can try to contact nearest Toshiba service provider and ask for help.

As you can see in other thread last user has posted link to Toshiba US support page.

Read other 5 answers
RELEVANCY SCORE 30.4

I want to use this old laptop which originally had win98. I managed to put win xp on it, but it is unworkable slow. Today I tried Lubuntu (a linux distributioon specific for oldies) but that too is too slow.

I just want a simple OS to browse.

A:Which new OS can I use with old Tecra 8100?

I don?t know which ?new? OS do you mean but fact is that you have old piece of hardware and if you want to have well working machine you should install supported operating systems ony.

Drivers for them you can find on Toshiba support page - http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp in archive

Read other 7 answers
RELEVANCY SCORE 30.4

Hello at all,
I have some Problems with the sound of my Toshiba Tecra A10. I already installed the Realtek Audio Driver and I see the little Speaker symbol down on the right side,too.

But I hear nothing. The Device Manager has a yellow Question Mark on "Modem Device on High Definition Audio Bus".

I Installed the Agere Systems Modem, but nothing happened.

Can someone help me and give me a link for this Driver I need.
I use Windows XP.

Hardware Detail:

HDAUDIO\FUNC_02&VEN_11C1&DEV_1040&SUBSYS_11790001& REV_1002\4&9E9AEC4&0&0101

Regards,

A:Tecra A10 - No Sound using Win XP

> I use Windows XP.

Ok, I though similar issues with Win XP on other notebooks with new HD audio from Realtek.
The point is that you need SP2 and SP3!

The SP2 and SP3 provides important fixes and patches for HD audio?
So first of all uninstall the installed Realtek audio driver.
Then install the SP2 and SP3.
Then go to the device manager and delete the devices marked with yellow exclamation mark.
Then reboot the notebook.
Now Win XP should found a new audio device and should ask for the driver.
No you should install the sound driver from Realtek.
Reboot once again? and now the sound should works fine?

Read other 9 answers
RELEVANCY SCORE 30.4

Is there a description available hoe to remove a harddisk in a Tecra R10 and plugin a new harddisc?

A:Tecra R10 - How to remove the HDD?

Hi buddy,

As far as I know the HDD is placed under the notebook cover and therefore a lot of parts must be removed like CD drive, keyboard, base assy, etc.

In my opinion it?s a tricky procedure and should only be done from a notebook technician because a lot of screws must be removed as well.

Is current HDD defective or why you want to exchange it?

Read other 5 answers
RELEVANCY SCORE 30.4

Hi everyone,
I have Tecra Z40 A-17K and i want to upgrade my storage. When i looked up inside of computer I saw another slot looks like ssd slot. I showed in red circle. Can i use it for additional ssd?

Read other answers
RELEVANCY SCORE 30.4

My laptop will not boot up.
When I plug in the PSU the green LED at the front of palm rest (far left LED) flashes slowly on and off.
No other LED lights are on at all. Pressing the power on button produces no effect.

Please can anyone advise what the problem might be with this laptop.

"Perhaps someone knows if that particular "sequence" of flashing is listed as meaning any particular problem lease.

Your kind help in this matter would be appreciated .

Thank you
Ian

A:Tecra A10 won't boot up

Hi
There must be definitely a hardware malfunction.

>"Perhaps someone knows if that particular "sequence" of flashing is listed as meaning any particular problem lease.

Knowing that you can read the blinking code using the following procedure:

The short blinking means 0 and long means 1.
The code might be something like 0001 0001

Error code starts with LSB (least significant bit) therefore the error code has to be read starting with last bit. This means that the code: 0001 0001 would appear as 1000 1000
This code you have to transform in HEX and you will get the error code.

But in my opinion even if you would know what cause this problem, mostly it?s some motherboard malfunction (maybe also a part connected to motherboard like RAM module) and this means that the whole part needs to be replaced.

Read other 1 answers
RELEVANCY SCORE 30.4

has any one had any issues with the cpu temp?
ive reapplied thermal paste and cleaned the fan but its getting rather hot max under load is 87c not enough to shut down but should it be reaching this temp?

Read other answers
RELEVANCY SCORE 30.4

This is my first post so apologies for any mistakes they are unintentional. Now does anyone know of a method that can use the right alt f4 key to be functional instead of shutting the computer down.

It is a requirement of a game.
Thank you

A:Tecra notebook - Right Alt F4 key

As far as I know ALT+F4 closes the applications but it cannot be used for notebook shutdown.
FN+F4 activate hibernation mode and notebook will be “shut down”.

Read other 1 answers
RELEVANCY SCORE 30.4

Hi,

i bought the Z40 with a 500 GB HDD. As a replacement i bought the following SSD:

Crucial CT512MX100SSD1 - 500 GB

Unfortunately i didn't get it to work. On the BIOS i can see that the system recognizes the ssd. But neither the restored system boots, nor windows 8.1 Retail installs. Are there any known compatibility issues?

The problems persist whether the bios setting is UEFI oder CSM.

I upgraded to the latest bios version to 3.7, but that didn't change the result.

A:Tecra Z40 - HDD Upgrade

If the BIOS recognize the new SSD drive, then the drive should be visible also for the system.
May I ask you how did you try to install the Windows 8.1 OS?
What installation media did you use?

The Tecra Z40 does not support internal ODD (optical disk drive). Therefore I?m wondering about the installation procedure

Read other 12 answers
RELEVANCY SCORE 30.4

Hi,

I have recently bought a Tecra M7 off a friend who had neglected it. It has been lying around for over a year with a broken power port. As a result of this he has lost all the discs and the pen!

I have upgraded the ram and have a 120 gig HDD that I would like to put in it but as I do not have any of the discs this is going to cause me a problem.
I have downloaded all the drivers I need from the toshiba website but am in need of the OS.

Is there any way for me to get the XP tablet edition 2005 which is already on it without having to pay a rediculous amount for a brand new copy?
Is it possible to transfer winows from 1 HDD to another? Also does anyone no where I can get 1 of the pens from?
I have looked about on the internet and can't seem to find any!

Any help would be greatly appreciated!

Jay

A:Tecra M7: Where to get Win XP Edit?

Hi mate

I?m not quite sure if you will be able to order such disk for this notebook.
In some cases this is not possible if the notebook series has been discontinued.
But check this page:
http://backupmedia.toshiba.eu/landing.aspx

Usually you could order the recovery disks there.
But if it?s not possible, then you will need to install the Windows using an Microsoft disk!
The necessary drivers could be found on the Toshiba European driver page:
http://eu.computers.toshiba-europe.com/

Note: you have to choose Archive in the driver download form in order to find the Tecra M7 series.

>Also does anyone no where I can get 1 of the pens from?
I think all parts could be ordered from local Toshiba ASP

Greets

Read other 1 answers
RELEVANCY SCORE 30.4

Hi,

I try desperately to update the bios of my old Toshiba A4-161.
I think not, because when I want to download the necessities bios, he asks me if I have an ATI graphics card and the other if it is a bios intel.

So I do not know which to choose.

Can you help me.

Here is my information from Driver Genius.


Summary
--------------------------------------
Computer brand: Toshiba Tecra A4
Operating System: Microsoft Windows XP Professional Build 2600
Service Pack: Service Pack 3
Processor: Intel Pentium M 740 (1733.3 MHz)
Motherboard: TOSHIBA Portable PC (Intel 915PM (Alviso-PM) + ICH6-M)
Memory: 512 MBytes (single-channel)
Hard Drive: WDC WD600VE-00HDT0 (57.231 MBytes (60 GB))
Optical drive: MAT****A DVD-RAM UJ-831S (DVD + R DL)
Video Adapter: ATI Mobility Radeon X300 [Toshiba]
Audio Adapter: Intel 82801FB ICH6 - AC'97 Audio Controller [B2]
Network Adapter: Marvell Yukon 88E8053 PCI-E Gigabit Ethernet Adapter
************************************************** **************Intel PRO / Wireless 2200BG Network Adapter (Toshiba mPCI 3B - MoW)
Battery: PA3399U-1BAS/BRS
--------------------------------------
Processor
--------------------------------------
Processor ID: 000006D8
Codename: Dothan
Stepping CPU: C0
Platform CPU: mPGA479M (Micro-FCPGA/FCBGA)
Revision of the microcode update: 20
Heart (s): 1
Thread (s): 1
Initial Frequency: 1733.3 MHz
Current frequency: 798.0 MHz = 6.00 x 133.0 [email protected] V
Temperature of heart processor: N / A... Read more

A:Which BIOS to use with Tecra A4-161?

You can find latest BIOS version on http://www.toshiba.eu/innovation/download_bios.jsp
Choose archive option to get listed all old models. There you can find Tecra A4. Please choose right short model number.

I don?t know which one has your A4. It can be PTA40E or PTA42E.

Read other 1 answers
RELEVANCY SCORE 30.4

ive just baught my daughter this laptop only it hasnt any operating system on it theres a windows xp pro product key sticker on it how do i download an xp pro onto it?

Read other answers
RELEVANCY SCORE 30.4

I want to purchase Toshiba Tecra Z40-A1402 - 14" - Core i7 4600U
This item has 128 gb SSD on it. Is it possible to install a regular hdd on this ultrabook?
Anyone has an idea?

A:HDD upgrade on Tecra Z40

Hi

Is this the right specification for Tecra you want to buy?
As I can see it has 500GB SATA HDD inside.

Read other 6 answers
RELEVANCY SCORE 30.4

Hi!

I'm in a bit of a dilemma. The current Tecra Z50 is extremely close to what I want in a notebook but the thing is, I currently don't really need it and I don't have the time to set it up. So I would buy one and have it lying around until late summer.

If I get one now and there's a new model out in summer, which I like even better, I would be very disappointed but on the other hand if I want to buy one in the summer and there's a new one with less connectors, a glossy screen with one of those extremely high resolutions or maybe without the pointing stick, it would be even worse!

So the question is: What can I expect from the Tecra Z50 in the future? I know that I probably won't get the information I need but I still had to post this.

Thanks!

A:The future of the Tecra Z50?

Future of Tecra Z50?
From my experience, Toshiba releases different notebook series within short spaces of time.
In most cases this applies to the ?everyday home? models like Satellite models.

The product life cycle of notebooks belonging to business segment like for example Tecra or Portege series is much longer? so from my point of few the Tecra Z50 should be available in the next couple of month.

But even if new models would be released, I think that older models should be still provided by some online dealers?

Read other 3 answers
RELEVANCY SCORE 30.4

Thinking of replacing the exiting ram with
G.Skill Ripjaws SO-DIMM F3-1600C11D-8GRSL 1.35V (Low Voltage) 8GB Kit (4Gx2) DDR3 1600


Not sure it is compatible. I doubt it is compatible to 8gb ram.
Please advice.

A:Tecra M11 - RAM compability

Can you please post notebook full model name (M11-xxx)?
Just to check which chipset is inside and RAM compatibility as well.

Read other 5 answers
RELEVANCY SCORE 30.4

My TECRA A7 has a 100GB HD and I wonder if I can replace it for a larger one.
Is it possible and what should I do?

Thanks for any help

A:HDD upgrade on Tecra A7

Hello

Your Tecra has SATA HDD connector so it should not be problematic to use HDD with higher capacity.
I don?t know which one you want to use but HDD between 200 and 300 GB should be good enough for upgrade.

What do you think about that?

Read other 1 answers
RELEVANCY SCORE 30.4

Hallo!

I saw in a Youtube Video, that the SSDs that come as standard are mSATA ones and that there's space for a 2.5'' drive beneath.

So my question is: If I buy a Toshiba Tecra Z50-A-12R, which comes with a 500GB HDD, can I install an additional mSATA SSD as my system drive and use the 500GB HDD as a second drive?

Thanks
Martin

A:Tecra Z50 - mSATA SDD + 2.5'' HDD?

Well, some models are are equipped with an mSATA Solid State Drive (SSD) instead of a
hard disk drive. The computer seems to supports a 128GB, 256GB and 512GB SSD drives?

but as far as I know there is only one SATA controller in order to connect SSD or an HDD.
The mSATA SSD drive is connected to the controller using mSATA HOLDER ASSY.

So such holder assy is needed if you want to use an mSATA SSD drive.
Of course, you don?t need it if you use common 2.5? SSD drive or 2.5? HDD

Read other 5 answers
RELEVANCY SCORE 30.4

The first three lights come on,when I try to start it . Nothing else happens no noise or anything. I have tried taking battery out,starting with external power only still the same.

Does it sound expensive to fix.

A:Tecra A2 is not powering up

Can you please post a bit more about this machine?
Have you bought it as used one and now you try to fix it?

Have you maybe tried to update BIOS and now you have this problem?

On this virtual way it is not easy to offer exact diagnostic but it doesn?t sound good to me. Maybe is BIOS screwed-up. Repair can be pretty expencive.

Read other 1 answers
RELEVANCY SCORE 30.4

I have Toshiba Tecra M7-132

I would like to improve everything possible

I want to increase the amount of RAM in my laptop but I do not know does my laptop can handle the memory faster than DDR2 533. I have Windows XP Tablet 32bit, I know it will handle only about 3.5 GB of RAM but it's better than 3 GB

I also want to change the hard drive. My current drive is HTS541080G9SA00 Hitachi, 80 GB, 5400 rpm SATA . Will it run with a bigger hard drive with speed 7200 rpm?

I installed all the most recent official drivers and BIOS

What else I can improve

A:How I can improve my Tecra M7?

Hello

According the specifications of Tecra M7-132 on Toshiba page it supports up to 4GB RAM but all 32bit OS support only up to 3.2GB RAM and for Windows XP 2GB is more than enough because it doesn?t need much RAM capacity.
The specification for RAM is DDR2-667.

Regarding the HDD: Larger HDDs are no problem because there is no capacity limit on SATA interface. That means you can also install 500GB HDD or larger. Only important is that you buy a 2.5? HDD with SATA interface.
Also 7200rpm shouldn?t be a problem but they creating more heat and need more battery power. Usually 5400rpm are enough and quieter.

Read other 7 answers
RELEVANCY SCORE 30.4

Hi all!!!

I'm Tecra A10-11K user and can I upgrade SSD on Tecra A10-11K?

A:Tecra A10-11K - Can I upgrade to SSD

Yes you can :)
You will need to use an SATA SSD drive

Read other 3 answers