Over 1 million tech questions and answers.

No display on Portege Z30-A screen but HDMI / RGB ports work

Q: No display on Portege Z30-A screen but HDMI / RGB ports work

Hi,

I have a 6 month old Z30-A Portege i7 laptop (PT243A-0HW02X) running Windows 7 64bit, and the 13.3" 1920x1080 internal display screen is not working - nothing is displayed on the screen.

However I can connect an external monitor via the RGB cable port or to the HDMI port and still use the laptop that way.

I have tried various Function F5 Output toggles choosing Clone, External, Extend, Switch Display, but nothing works to get output back again to the laptop display screen.

On the External option I see a laptop icon in grey colour with a X on the screen, and a '1' on the other display icon, and a window appears for 'Toshiba Flash Cards' with red x error message " Failed to initialize Output Configuration dialog!".

There is no further help available to tell me what the problem is.
When I choose the Function F5 Output Configuration option, the 'Internal' line is greyed out, so I can't select it.

Has anyone else had this issue?
Could a BIOS update help to tell me if there is a hardware issue?
There is nothing about the display error in the Windows event viewer.

Thanks.

RELEVANCY SCORE 200
Preferred Solution: No display on Portege Z30-A screen but HDMI / RGB ports work

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: No display on Portege Z30-A screen but HDMI / RGB ports work

I have a similar problem.

When I boot up, I see the Windows 7 logo, but then everything goes black after that.

I can start the computer in safe mode and the laptop screen works no problem. In Safe Mode I can even switch to 1920x1080 resolution. So the video hardware + drivers are working, just not in normal Windows mode.

Tried reinstalling video drivers but no luck.

I also wiped the computer and reinstalled Windows 7 + video drivers and still no luck...

It started happening literally out of the blue... after six months, like yourself.

I have a Z30t-A-123.

Does anybody from Toshiba respond here or are we left to our own devices?

Read other 5 answers
RELEVANCY SCORE 69.2

I bought a second hand gaming PC (i7 4770 RX480 win10) recently, the only way I can get any display to show on my monitor is through the HDMI port, it has three other display ports on the GPU, and HDMI/VGA/dvi on the motherboard.

I've checked using multiple monitors and two brand new cables and the only port that seems to send any signal is the HDMI in the graphics card.

Is this a drivers or config issue?
 

Read other answers
RELEVANCY SCORE 68.4

I have a aspire ME600 intel 7. Ive tried plugging a usb drive into all the ports but the usb drive does not get power it usally glows red when its connected but nothing happens on this pc. I cant see anything on my monitor the monitor its self works and ive tried using the hdmi port and it doesnt work anymore. It was working fine one minute then after i turned it off all of these problems started. Halp!

Read other answers
RELEVANCY SCORE 66.8

I have an HP Pavilion 550-154na desktop connected to my Dell monitor by HDMI cable from the graphics card, it works fine. But I'd like to connect a second monitor (or projector). The graphics card only has one HDMI port, but the back of the machine has two HDMI ports (covered with black caps), which presumably come off the motherboard. I tried plugging my monitor into one of these ports but the screen stayed blank. What are my options? Is it possible to get output from these ports or do I need to use a splitter or something?

A:Should my motherboard HDMI output ports work?

Hi: When your model has a discrete (add-on) video card, the onboard graphics is automatically disabled. Look under the Integrated Graphics specs. http://support.hp.com/us-en/product/HP-Pavilion-550-100-Desktop-PC-series/8499648/model/9242957/docu... You can get output from those ports if you remove the graphics card. If you leave the graphics card in, you can either hook up a DVI cable from the DVI out port on the graphics card to the DVI input of your monitor.  I would think most monitors have multiple inputs. If your other monitor only has a HDMI input, get a DVI to HDMI cable. You will not get audio from a DVI port.

Read other 1 answers
RELEVANCY SCORE 66

Only the blank port out of my PC works. HDMI ports labled as"1" and "2" do not work. Why? I need to set up multiple moniters.

Read other answers
RELEVANCY SCORE 64.8

Purchased a new M715Q mini and upon connecting using the display port and HDMI for video was not being recognized. I then looked at the the USB mouse and found that it was not being recognized either. Tried all USB ports and none of them recognized the mouse. I have a 3 other lenovo products M900 series and 2 laptops and they all work with monitors and mice. I also found the unit getting extremely hot where the fan kicked on 3 times and turned off. Has anyone else had this issue?

Read other answers
RELEVANCY SCORE 63.2

I recently bought a new PORTEGE Z30T-A PT24CE-01600EN5

It was Win7 pre installed and I upgraded to:
OS Version Microsoft Windows 8.1 Pro 6.3.9600 with their CDs.

The problem is the FN keys do not display on screen.
When I first got my laptop under Win7 I would press the FN key and options would display on my screen, that was great. But after a day it doesnt display anything on the screen.

How can I fix this problem?

Message was edited by: djemo

A:FN keys do not display on screen Portege Z30T-A

Hi

At first I must say that described issue is not a problem.
Under Win8.1 Toshiba has offered FN keys usage in two modes:
-Special function mode
-Standard F1-F12 mode.

If you use Win8.1 open please Desktop Assist > Tools & Utilities > System Settings > Keyboard.

There you can change function keys mode.

Please test it how it works.

Read other 6 answers
RELEVANCY SCORE 62

So i've built a pc, and after some days I changed the stockcooler, after I changed the cooler I booted up the pc. The pc boots up but some usb ports don't work and it shows no Display. I searched for the problem and some people said it was the motherboard that was damaged, so I did that, bought a new motherboard, built the pc again and the problem was still the same. Can anyone help me solve the problem?

PC specs:

- Ryzen 7 2700x

-Ram Memory - 16 GB of Ram Memory

-GraphicCard - Rtx 2070 Super 8 gb

-Power Supply - Corsair RM650x 650W

-Ssd - 1 Tb Ssd

-Motherboard - MSI B450M Pro-VDH Max
 

A:Some usb ports don't work and no Display after changing cooler

Remove the GPU and use the motherboard VGA and see if you get any display.
 

Read other 3 answers
RELEVANCY SCORE 61.6

So I've bought a pen for M200 and reinstalled the operation system.
Now I have M200 with Windows XP Tablet PC edition, a Screen Rotation utility and Pen Button utility. Now Pen Buttons work fine with my new pen, but the screen itself doesn't. I mean, the pen doesn't work with the screen.

I have a Mice and other pointing devices menu in Device Manager and it consists of the following sub-menus:

HID-compliant mouse (Random DELL mouse I'm using)
PS/2 Cimpatible Mouse (?)
--------

I believe there must be something else..
Please tell me, forum, what drivers should I download to make the pen work?

A:Portege M200 - Pen doesn't work with the screen

Wait a moment. Do you use original Toshiba recovery image (operating system) or you have installed your own version?

Read other 4 answers
RELEVANCY SCORE 60.8

New laptop. Good HDMI cable working fine. Sony Bravia TV uses the HDMI port too. I try to use a Display Port to HDMI converter from E-Bay and what happens is the image on TV flashes at 1 sec intervals.  The E-Bay seller is willing for refund as he is sure it worked with WIN 8 OS. IS there any patch I can try in the laptop or alternately should return the adaptor to E-Bay and buy one from HP ??

A:Display Port to HDMI does not work on Elite Pro 9480M ( WIN ...

Hi, Have you found the anwers for this problem? I´m having the same issue with my machine. Please let me know Thank you Kind RegardsKarin

Read other 1 answers
RELEVANCY SCORE 60.4

Hello,

in the instructions:

Changing the screen orientation
When operating the computer in tablet mode, you can change the screen orientation by roting the computer sideways. The screen orientation automatically changes according to the rotation angle detected.

But it does not go!
The operating system is windows 10.

What can i do?

A:Portege Z20T: Windows 10 - Changing screen orientation don't work

This response from Toshiba is an outrage.
Es tut mir sehr leid, dass Sie eine negative Erfahrung mit Ihrem Toshiba Ger?t machen mussten.

Aufgrund der Themen-Komplexit?t und m?glicher notwendiger R?ckfragen k?nnen Anfragen zur Konfiguration und Installation von Software (Treiber, Betriebssystem etc.) nicht immer vollst?ndig per E-Mail beantwortet werden. Wir bitten daher um Verst?ndnis.

Nutzen Sie hierzu bitte unsere umfangreichen Online Supportangebote <http://www.toshiba.de/innovation/generic/SUPPORT_PORTAL/%20> oder wenden Sie an unsere Experten unter 0900-18674422 (1,56 Euro/Minute).

Sollten Sie noch Fragen haben, z?gern Sie bitte nicht, erneut mit uns Kontakt aufzunehmen. Sie erreichen uns Montag bis Freitag von 8.00 Uhr bis 18.00 Uhr unter der Telefonnummer (0 21 31) 52 40 40 00

Mit freundlichen Gr??en,

i.A. IME Service
Who can help, when the Support dont help?????????????????????????????????????????????? ??????????

Read other 1 answers
RELEVANCY SCORE 60.4

Quick question - will a keyboard for a Portege S100 work in a Portege M100?

Layout looks similar; albeit a different colour.

A:Will a keyboard for a Portege S100 work in a Portege M100?

Hi

I think you cannot use the same keyboard because the Portege S100 supports the an-easy-to-use 84-key (US) or 85-key (UK) keyboard and the Portege M100 supports the an-easy-to-use 85/86-key keyboard.
Furthermore the connector of the S100 supports the CN3230 keyboard interface 34 pin connector and the M100 supports the PJ3230 keyboard 34pin connector.

So possibly this could be a problem.
I recommend using the original keyboards released for the each notebook model.

Read other 1 answers
RELEVANCY SCORE 60

Hi guys, just found out this place, seems to be a good forum so I try it here.

Last night I got hold of a 27" BenQ GL2750HM, so far so good.
I have my main display from the DVI port to HDMI port on the screen and my secondary screen is my 60" TV which is connected through HDMI port on the graphic card into the HDMI port in my reciever.

The main scheme for my setup is like:

- Radeon 7970 DVI > HDMI Main monitor (BenQ GL2750)
- Radeon 7970 HDMI > HDMI Reciever (ONKYO TX-NR609)
- ONKYO TX-NR609 > 60" TV

So to the problem now.
When the HDMI cable is connected to the graphic card, I need to have my TV ON in order for my main monitor, the BenQ, to work and if I turn off the TV the BenQ is getting black, like a standby mode, however, there is "no signal" to the monitor.
This was never a problem with my other screen, I could have the HDMI cable connected to the graphic card, the TV off and the reciever OFF without the main monitor went black.

I hope I expressed myself good enough for you too understand, if not, please reply

Thanks in advance.

A:Issue: Main display doesn't work when HDMI is plugged

Noone got a clue?

Read other 5 answers
RELEVANCY SCORE 59.6

Having an issue with my X1 Yoga  riinning Win10 64-bit and all firmware & drivers are up to date. I often plug in an HDMI screen to my machine and when I do and step away for a few mins the screen goes blank to save power etc. When I return and click these or hit a key the backlight on the laptop comes back on but no image is displayed on either the laptop nor the HDMI monitor. If I unplug the HDMI cable then the laptop screen comes back perfectly and then I can plug the HDMI back in and get the image back on my larger monitor. This seems much different issue then the "blank screen" I read up on and appears to be a detecing from sleep state issue in the driver etc. Anyone else have this? Any fixes for this as I'm plugging the HDMI in/out/in 5 times a day or more... This never occured in the past so appears to be an update issue. 

Read other answers
RELEVANCY SCORE 59.2

Hi, on my Yoga C930, once I have woke up the laptop from sleep, external 4K TV shows that there is no input signal. I need to unplug and replug the HDMI cable for the external display to get signals from the laptop again. How about the X1E with 4K screen? Also, for the X1E with 4K screen, does connection to projectors work 100% of the time? My Yoga C930 doesn't.

Read other answers
RELEVANCY SCORE 58.8

I just bought a M720 SFF and realized their is no HDMI outs (or ins ) , display port on tower. I have a dell monitir with HDMI out ... Do I buy a graphics card with an HDMI slot and pop it into my new machine ? and does it have to be lenovo ? Thx sooo much

Read other answers
RELEVANCY SCORE 58

Am having trouble with a 3 display set up:
1. Laptop display OK
2. HDMI flat screen OK
3. VGA smaller flat screen

Windows 7 will not allow me to duplicate desktops 1 and 3 ( or any other combination) that allows 3 different views.

Suggestions ? Thanks

A:3 display set up , different screen sizes, 1 VGA and 1 HDMI

It isn't Windows that is stopping you but the laptop itself. The laptop may have two additional display ports/hookups in addition to the laptop's own screen but it doesn't mean you can use all three at once. You don't say what laptop, but you will likely find that the video card in it can only support up to two display devices at a time, with one of them being the laptop's own screen.

You want to run three displays off of a laptop, you're going to need an external video device something like this,

Newegg.com - StarTech USB 3.0 to VGA External Video Card Multi Monitor Adapter – 2048x1152 USB32VGAE USB 3.0 to VGA Interface

Read other 2 answers
RELEVANCY SCORE 58
RELEVANCY SCORE 57.6

Hi All I am in a epic battle with a brand new Yogo 460 for a week now. The main focus is to get the HDMI port to work, or to put it better to actual display something on the second screen. Let me tell You a little about the setup, its a Yoga 460 connected to a Dell 22 Monitor via HDMithis is a basic setup and i have done this a thousant time but with this setup the YOu Just dont want work with me. I have updated the screen drivers hoping it wil fix is.I have used diffrent drivers but this Jyst made the Yoga mad.I have tested the cable by using other laptops to the same screen and that worksI have used mutiple screens from diffrent makes but still the Yogo is refusing to budge. any Idea?

Read other answers
RELEVANCY SCORE 57.6

Hello. I have my computer set up to display on my TV through an HDMI cable. But the display won't reach the edges of the TV. Any help would be greatly appreciated!

Read other answers
RELEVANCY SCORE 57.2

My computer doesn't recognize USB ports upon startup. When I turn it on, it says Floppy diskette seek failure, and I have to press F1 to continue or F2. It's always said that... and my mouse lights up and my key board lights up fine... but when I press F1 and it goes to the Windows loading screen, the lights powers off and the keyboard doesn't work.. and I can't use my mouse or keyboard when it reaches my login screen... can anyone help me? D:
 

A:USB ports don't work upon login screen...

Read other 16 answers
RELEVANCY SCORE 56.8

Hello, sorry if this is in the wrong place I'm new here. Anyways, I bought a brand new out of the package HDMI cable today to hook up my laptop to my TV. The cable fits into both my laptop and TV and its on the right input setting on the TV but when I get on my laptop it doesn't recognize 2 monitors. If it helps to know, I have windows 7 on an HP 15 (I don't know if that's the exact name of my laptop but I did buy it brand new from Walmart in 2014) and my TV is a flatscreen Vizio. Anyone know what I may be doing wrong? I really could use the help!!
 

A:2nd display screen wont show up. HDMI cable.

When you click the down arrow to the right of 'Display' in your screen shot there is no other entry, right?

Maybe there is a problem with the cable or with the laptop's HDMI or the cable is not connected quite securely. In the two years since you bought the laptop the HDMI port could have gained some dust or corrosion. Blow gently into the opening to dislodge any dust. Connect/disconnect the cable several times to clean off any possible corrosion.

Try Restarting or powering up the laptop with the cable already connected.
 

Read other 1 answers
RELEVANCY SCORE 56.8

Hi Everyone, Just checking if Lenovo Z560 can support 2 External screens WITH the Laptop Screen on in Extended Mode? I searched on Google and here, couldnt find anything. CheersNelson

Read other answers
RELEVANCY SCORE 56.8

After having looked on TV with hdmi connection I have no lcd display and np more hdmi. Only VGA on an old acer al1914 works.I have updated drivers and BIOS. Hard reset with battery disconnected does not fix problem.Projector setting does not work and I can not adjust screen brightness with f3 or f4 buttons.Properties tell drivers work ok. Unisnstalling and reinstalling amd driver does not cure. Please suggest other possible actions before I leave it for repair. 

Read other answers
RELEVANCY SCORE 56.4

My ENVY Touchsmart, when turned "on" runs, but there is a black screen, and no ports work.  Is this a software issue, motherboard issue or hard drive issue?  How can I get it functioning again?  Happened after a Windows 10 update (originally a Windows 8 OS)

A:HP Envy Blank Screen and no Ports Work

Dear Customer , Greetings for the day!!!  issue- BLANk SCREEM AND NOT PORTS ARE WORKING AFTER WIN 10 UPGRADE  PLEASE TRY THE BELOW STEPS: POWER FLEE 1.please turn off the notebook remove all the peripherals connected including the charger .2.keep the notebook turned off for say about 3-4 min and then switching on the notebook. If in case above steps do not work, Turn on the notebook by pressing the power button within 5 seconds continously keep tapping ESC ,once you are at the startup menu - select f11 from the keyboard. f11 recovery - troubleshoot - recovery manager - i need immediate help - system recovery - without backup  NOTE : COMPLETE DATA LOSS IS EXPECTED OF THE F11 SYSTEM RESCOVERY ONLY WIN AND SOME BASIC DRIVERS. link :http://support.hp.com/us-en/document/c04758961 




I'm an HP Employee.The opinions expressed here are my personal opinions, not of HP.Click on Thumbs up if my post helped you.Make it easier for other people to find solutions, by marking an answer ?Accept as Solution? if it solves your problem.Regards,Vijay

Read other 1 answers
RELEVANCY SCORE 56.4

lenova g580 no screen work with windows 10, work only from hdmi monitor.build in monitor do not work.how do repair?

Read other answers
RELEVANCY SCORE 56.4

Tv: Panasonic Viera E6 PC: Asus K55VM with Win8
Basically the tv cuts the corners. Can anyone help me?
Screenshot by Lightshot
Can anyone help me?
Thanks in advance

A:Tv connected by hdmi cable to pc doesnt display the entire screen

Hi and Welcome to TSF!

Is Windows set to the correct resolution?

Are your video drivers up-to-date?

Read other 2 answers
RELEVANCY SCORE 56.4

I was moving our Dell Studio 17 laptop and the screen went blank. I thought it did a power save or something. But I could not get it redisplay anything..no flickers, nothing.

I rebooted, nothing.

I opened up the back and reseated the ram and verified the hard drives were secure. I vacuumed out any dust. No difference.

So I tried using the HDMI with our TV and it displays just fine. I try to toggle the screen (function F8 on my laptop) and it makes no difference. HDMI is always shown.

In the past when we use the HDMI to display netflix movies on our TV, I hookup the HDMI and the laptop automatically switches to the HDMI display and turns off the laptop display. When I unplug the HDMI, it wouldnt turn the laptop screen back on. I would have to reboot with the HDMI disconnected for the display to come back.

Now rebooting doesnt not bring the screen back.

Anything else to try? are there settings somewhere forcing the laptop to not send info to its own screen? BIOS?

This laptop has an ATI card and uses the latest drivers. It does have the Catalyst control center where it detects the displays. It seems the 'unknown' laptop screen and TV (when HDMI is connected, the only way I can see the screen at this time)..but it calls them duplicates and calls both of them #1 display.

Thanks for the help
 

A:Laptop screen went blank - external HDMI display works

Read other 6 answers
RELEVANCY SCORE 56.4

Hello,  I have a problem with HDMI output. my laptop: HP ENVY - 15t Slim Quad Laptop,15t-q300 CTO (ENERGY STAR) (L6E55AV);4th Gen Intel(R) Core(TM) i7-4722HQ Quad Core Processor + NVIDIA GeForce GTX 950M 4GB DiscreteWindows 10 64bitconnected to ext. disp ACER S241HL via HDMI to DVI cable. Using same resolution 1920x1080 on laptop display and ext. diplay  I connet my external display to laptop  and everything fine. Laptop screen is duplicateted. After time (is vary, couple of hours or days) it dissconnect by itself and external display turn black. Sometimes after few second it comes back to normal or screen start jumpping between laptop display and ext. display. More often is just screen come back to laptop and I am try to project (win+P) screen to ext. display but windows respond with no action. If I want to project screen screen back I have to disconnect HDMI cable and wait15 minutes and connect back a everything work until it happend again and problem  appears in shorter and shorter period after finnaly cant do anything iby this way. Sometimes works to dissable intel 4600HD driver in Device manager but more often just unninstall  driver and after restart  windows install driver back(driver is updated to the latest) and everything is working until problem appears again. It really annoying and I tried everything, problem present with WIN 7, 8.1 and 10. Try disable intel HD grafics a... Read more

Read other answers
RELEVANCY SCORE 56

Hi all,

I have a quandary. Monday morning I was using my PC as per usual and updated iTunes and icloud - darn apple and their updates. restarted the PC and when it came back to the login screen my mouse no longer physically lit up nor would the cursor move. Luckily I was heading to work so I shut the PC down and went my merry way.

After a good ten hours I got home, turned the PC on, fully expecting the problem to be resolved. Sadly, it wasn't. I can not make the cursor move on the login screen.

It's now Wednesday afternoon, I've tried a wired mouse, two wireless mice, a wired keyboard and a wireless keyboard, I can get to the bios commands but F8 doesn't give me any repair option, it just loads to the windows login screen wherein I can't do anything else.

I've been scrolling google for similar issues, a lot of people refer to system restore but isn't that only available once you are in windows?

If anyone has any advice I would love to hear from you, I am stumped.

A:After updating Itunes. no USB ports work on the login screen.

  
Quote: Originally Posted by Kanoshiiva


I've been scrolling google for similar issues, a lot of people refer to system restore but isn't that only available once you are in windows?


You can do a system restore from a bootable Windows CD/DVD, see this tutorial:
System Recovery Options

Read other 1 answers
RELEVANCY SCORE 56

Hi all,

I have a quandary. Monday morning I was using my PC as per usual and updated iTunes and icloud - darn apple and their updates. restarted the PC and when it came back to the login screen my mouse no longer physically lit up nor would the cursor move. Luckily I was heading to work so I shut the PC down and went my merry way.

After a good ten hours I got home, turned the PC on, fully expecting the problem to be resolved. Sadly, it wasn't. I can not make the cursor move on the login screen.

It's now Wednesday afternoon, I've tried a wired mouse, two wireless mice, a wired keyboard and a wireless keyboard, I can get to the bios commands but F8 doesn't give me any repair option, it just loads to the windows login screen wherein I can't do anything else.

I've been scrolling google for similar issues, a lot of people refer to system restore but isn't that only available once you are in windows?

If anyone has any advice I would love to hear from you, I am stumped.

A:After updating Itunes. no USB ports work on the login screen.

  
Quote: Originally Posted by Kanoshiiva


I've been scrolling google for similar issues, a lot of people refer to system restore but isn't that only available once you are in windows?


You can do a system restore from a bootable Windows CD/DVD, see this tutorial:
System Recovery Options

Read other 1 answers
RELEVANCY SCORE 54.4

When viewing the Dell Optiplex 9030 specifications, it states that the device can be used as an external display for other devices, via its HDMI input.
I have followed the instructions given in the link below to link-up a MacBook Air as a video input, using HDMI. One user in the thread below says they have successfully done this, although it is not working on my machine. 

When I switch the display from "PC" to "HDMI" using the OSD (On Screen Display) buttons it only shows a black screen, although my MacBook Air detects that it is connected to the Dell Optiplex 9030, and adjusts its settings accordingly. On the Optiplex 9030, the question-mark below where it says "HDMI" on the OSD disappears, but no signal is displayed on the screen. 
Can anyone please explain a workaround to this problem? 

Read other answers
RELEVANCY SCORE 54.4

I cant turn on the pc but specs are: immpb fm motherboard, amd ryzen 480 graphics card with a intel core i7 (i think) it turns on and was working fine until an expert installed this motherboard. My imgur link shows me trying to turn on the pc and use it http://imgur.com/a/b3BEhvG i know its not the monitors but thats all i know.
 

Read other answers
RELEVANCY SCORE 54

I did an upgrade from Win 7 , and Screen Saver / Turn off display after 5 mins was working under Win 7 64 bit
As my title suggest Screen Saver / Lock screen Slideshow / Turn off display after 5 mins are not working under Win 10
The Lock screen Slideshow is there when Win 10 starts but only shows ONE image, never moves to another.
THINGS I've done so far to get any of these working ...Screen Saver / Lock screen Slideshow / Turn off display after 5 mins
I’ve turned off all the Wake on lan functions
Tried different folder/ images for the lockscreen Slideshow ,window spotlight and picture
Tried to set new power options , was able to get SLEEP to show up in "Start" as it was not there before, but once click , the display DID turn off, but wouldn’t turn back on with mouse movement keyboard presses, had to do a hard reboot. Win 10 started without issue and the SLEEP mode was no longer aviable via the power "start" menu.
Anyone have a clue how to get all of these working. Really would like my display to turn off after 5 mins , and the Screen saver to work , the Lockscreen I'm not fussed about

Read other answers
RELEVANCY SCORE 54

Hi folks,I have a 20BT0018US model and it has a native HDMI port & a Mini Display Port The Specifications for this Model state:Your computer supports the following video resolution, if the external monitor also supports that resolution.? Up to 1920 x 1200, with an external display connected to the VGA connector? Up to 2560 x 1600, with an external display connected to the mini DisplayPort connector? Up to 4096 x 2160, with an external display connected to the HDMI connector I have attached two different HDMI cables to three different monitors.Some were native HDMI, others had HDMI to DVI converters on them. All scenarios result in a maximum screen resolution of 1920 x 1080Althought the monitors support a greater screen resolution, I can't seem to get anything higher ?? Has anyone resolved this ?Thanks

Read other answers
RELEVANCY SCORE 54

Hi folks,I have a 20BT0018US model and it has a native HDMI port & a Mini Display Port The Specifications for this Model state:Your computer supports the following video resolution, if the external monitor also supports that resolution.? Up to 1920 x 1200, with an external display connected to the VGA connector? Up to 2560 x 1600, with an external display connected to the mini DisplayPort connector? Up to 4096 x 2160, with an external display connected to the HDMI connector I have attached two different HDMI cables to three different monitors.Some were native HDMI, others had HDMI to DVI converters on them. All scenarios result in a maximum screen resolution of 1920 x 1080Althought the monitors support a greater screen resolution, I can't seem to get anything higher ?? Has anyone resolved this ?Thanks

Read other answers
RELEVANCY SCORE 53.6

Hi, in the playback device list I can only see the default speakers. When I connect to the TV via HDMI I can see the video but no sound reach the TV. I've checked all drivers, uninstalled and re-installed them, tried to install earlier versions of Graphic Card 5500 directly from Intel with no success...

Windows 7 Professional SP1 64bit
Intel Core i5-5300U

Suggestions?

Thanks
Daniele

Read other answers
RELEVANCY SCORE 53.6

Hey!

I have a Portege R705 and for around 2 years I've had a setup with two samsung Syncmaster 2443 displays, one connected by VGA and 1 with a hdmi to dvi cable.

I've never experienced any problems until one of the screens could not detect a signal anymore. Neither monitor can detect the hdmi signal and both detect the VGA.

I have proceeded to purchase a hdmi to dvi adapter and connect the dvi cable that was delivered with the monitor to my screen but without success.

I'm pretty much out of ideas, has anyone experienced something similar or has anyone got any ideas on how to fix it?

many thanks,

Matthias

A:Portege R705 - HDMI output has stopped working

It is somehow strange that you have noticed this problem for no reason.
Have you may changed anything, installed some additional software, update or anything that can be responsible for this?

When you test only one of these both monitor do you have this problems?

Read other 6 answers
RELEVANCY SCORE 52.8

I purchased an external monitor on Friday.  It worked on Friday and Saturday. Sunday when I booted up, the external monitor no longer worked. The history appears to show an automatic update occurred overnight.  I was running Windows 8.1.  I upgraded to 10.  I have uninstalled and reinstalled the intel video driver, I reinstalled the chipset driver.  I have trimmed the micro HDMI cord as suggested in one of the posts.  I have seen enough posts on the various boards to know my issue does not seem to be an isolated case... but I haven't been able to find an explanation of the cause or a reliable solution.  Any help is appreciated.

Read other answers
RELEVANCY SCORE 52.8

I have the GTX 560 connected to a 1080p HDTV. Getting fuzzy picture in Windows environment.

A:HDMI - HDMI gettting fuzzy display on HDTV.

Tried new cable? Fiddled around with the options in the control panel? Left nvvsvc.exe and nvxdsync.exe alone?Latest drivers? Not sitting too close to the TV?

Read other 6 answers
RELEVANCY SCORE 52.4

This is a brand new custom built PC for web browsing for a motel lobby.

Win7 Home Premium
AMD A4-3300 Llano
MSI A55M-P33 FM1
Rosewill FBM-02 MicroATX Mini Tower

Running latest BIOS and latest drivers downloaded directly from manufacturer's website.

I tried switching between all 3 internal headers and none of them would detect the flash drive.

If I plug the drive in the rear ports it detects right away leading me to suspect the case's ports might be defective but I don't have another USB 2.0 card lying around to confirm.

Based on this info does it seem likely that the front ports themselves are faulty?

A:Front USB ports not working, but rear USB ports work…

You might check to see if the case end of the USB cables are properly plugged into the front panel holding the headers. Some board need more than one brand of USB drivers, Renesas, NEC, etc.

Read other 9 answers
RELEVANCY SCORE 52

I am so confused. Is my Lenovo 3000 N500 4233 63U HDMI compatible? Why it has the port, why the BIOS recommened/installed is NON-HDMI (version 1.10 BIOS 6GET19WW) and why it doesn't work when connected to any Tv with HDMI capability?  Should i downgrade to 1.09. I m running Windows 10 since July 2015 and ...this is another issue which probably will force mesoon to go back to Windows 7, the last update installed successful for windows 10 was Sep 2015; ever since, all the updates don't install, don't download sometimes, whatever adivse i followed, no windows update can be installed. Thank you so much Vera

Read other answers
RELEVANCY SCORE 52

I have intel i3 laptop when I turn on the button later the display screen color is faded for sometime and finally the display screen off .But now it show nothing on screen when I turn on my laptop, please suggest me something that I can do .

Read other answers
RELEVANCY SCORE 52

Hello.

I have the Portege R930 (pt331a-01w001) running window 7. Everything on the laptop works as expected, however when I plug the laptop into a high resolution monitor (2560x1440) via the HDMI port I get blue screen of death.
I can use the HDMI port to connect to my 1080p LCD TV and my work monitor which is a lower resolution and it works ok.

I have tried multiple cables and different monitors of the same resolution.

Can anyone assist?

A:Portege R930 - BSOD when connecting high resolution monitor to HDMI port

Hi

Simply said: the notebook does not crash using external monitor with lower resolution than 2560x1440. Right?

Found your notebook model.
[Portege R930 PT331A-01W00101 |http://www.mytoshiba.com.au/support/computers/portege/r930/pt331a-01w00101/specifications]


and it seems that the unit supports the Intel? QM77 Express Chipset and Intel? Graphics Media Accelerator QM77

I would recommend updating the graphic card driver.
On the Toshiba page you can find the Intel display driver v8.15.10.2712 (Win 7)
Also you could test the version downloaded from Intel page.

Read other 3 answers
RELEVANCY SCORE 51.6

My screen doesn't work. I updated my Windows 10 (not sure if I have the 32 or 64 bit system), waited until it was done, and then closed my laptop. Now, when I boot it up, I can hear it boot up, and the light for my caps lock flashes. I've tried removing the battery, waiting about 30 seconds, then putting it back. I've also tried removing it completely and just using the plug in charger (not sure what it's called, it's the wall charger to the battery). I've tried turning it off and on multiple times. I don't have an external monitor, and I don't have a monitor scrolling key on my keyboard. Is there anything else I can try before having to take it in to a professional?

Read other answers