Over 1 million tech questions and answers.

Hp pavillion boots up but screen remains blank

Q: Hp pavillion boots up but screen remains blank

Hp laptop taking to long to boot up and monitor remains blank

RELEVANCY SCORE 200
Preferred Solution: Hp pavillion boots up but screen remains blank

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Hp pavillion boots up but screen remains blank

Need help

Read other 1 answers
RELEVANCY SCORE 97.2

Hi - I've had my hp laptop for about 3 years. It has been relatively trouble free but yesterday I booted up normally ... but the screen remained blank throughout. I attempted to reboot with the battery out - to no avail. It still boots up normally but the screen still remains blank throughout ....

A:Boots up normally but the screen remains blank throughout,

Hi @jamesmarino?,Thank you for visiting the HP Forums! A great place where you can find solutions for your issues with help from the community!I came across your post about the Notebook, and wanted to assist you! I have looked into your issue about your HP Pavilion dv6-6c36tx Entertainment Notebook and issues with the Notebook not starting.Try performing a hard reset.When performing a hard reset please note remove any and all USB devices. Disconnect all non-essential devices.Here is a link to computer won't start for Windows.Plug the power adapter directly into a different wall outlet. Do not plug it into a power strip, surge protector, or secondary power source as this could cause and issue.Do you hear the Fans? If yes, try to connect to a monitor to see what happens.Have you tried reseating Memory and the HDD?Please let me know how this goes.You can say thanks for trying to help by clicking the Thumbs Up below!.Thanks.

Read other 2 answers
RELEVANCY SCORE 70

After trying all the troubleshooting steps several times, my screen does not come on when I turn on my computer.

Read other answers
RELEVANCY SCORE 70

Hi,
I have a Fujitsu-Siemens (Amilo series) laptop. I have windows XP on my machine.Everything was fine since yesterday.
Now when i turn on the lap top , i can see the power lights and all but there is nothing at all on the laptop screen. The screen remains blank...no cursor...nothing at all just a dark screen. I don't know what has happened. Please guide me to solve this problem.
 

A:laptop screen remains blank

No picture means No device.

When the computer boots and runs just fine, and you can even hear Windows running (sounds and all), but the screen is blank, somehow you have deleted the Display Device from your Hardware profile.

I've accidentally done this before myself while trying to update my video driver. It kept prompting me to switch to the "default VGA driver" and I foolishly thought disabling the existing driver would force it to use the default. But no, when you remove a device, be it a printer or pci card or even your computer screen, Windows happily obliges and just reboots without it (you can't even get it back by using Safe Mode). Once a device has been removed, only redetecting it will get it back. And that is difficult to do with a monitor when you can't even see the screen to do it.

Unfortunately, not even reinstalling Windows or doing a "Repair" will get it back. The only solution I found to such a disaster was to reformat and reinstall Windows.

What was the situation leading up to your screen blanking out? Might it be the result of anything you did yourself?
 

Read other 1 answers
RELEVANCY SCORE 70

I have performed all of HP Steps for Resolution.Step 1:  Hard ResetStep 2:  Listen to Computer for Beeps and LightsStep 3:  Reset BiosStep 4:  Turn off Sata Power ManagementI have also replaced (all new parts) the:MotherBoard andDisplay Power Panel.With the machine powered on, everything is working.  Fans, DVD door will open and light will flash.  You can feel the Hard Drive spinning.****Does this mean the LCD Monitor is Bad?**** 

Read other answers
RELEVANCY SCORE 69.2

My laptop screen won't come on. I have tried the hard disk reset but it still won't show anything, the light will come on but that is all.

A:Computer light will come on but the screen remains blank

   http://support.hp.com/gb-en/document/c03518165 hope this helps you. 

Read other 1 answers
RELEVANCY SCORE 69.2

I have a Dell Inspiron 1526 laptop. I turned it off to let the updates for my computer to install, and when I went to turn on my laptop the next day, I was in for a shock. I press the power button and the battery charge light turns on, along with the WiFi, I hear something click, and the webcam flashes on as it normally does. And that's where it ends. I have tried the Fn+F8 (which is my CRT/LCD) function button, I have tried with an external monitor, and I have also tried removing my battery and holding the power button for a minute. Nothing is working and I'm becoming very frustrated. My laptop is only 5-6 months old and I don't know what to do. I want to get some help from my peers before I go out and spend a ton of money to get someone else to fix it for me. If anyone has ANY ideas/suggestions that would be GREATLY appreciated. Thank you.
 

A:Solved: laptop screen remains blank...

Read other 7 answers
RELEVANCY SCORE 69.2

Hi, My working 410s laptop is not starting up. The power button turns green when i press it but nothing else happens, it stays like this forever. No POST message, no BIOS screen ... nothing. The power button stays green however. I googled about it, and removed the battery and 'discharged the static' by pressing power button for 30 seconds. After that when i press the power button, it turns off after a couple of seconds. I think that is the right behaviour? But when I plug in the AC power cable, the original problem returns, the power button stays on but the screen is black and no other actiivty seems to be happening in the laptop. Please help. 

A:T410s not starting up, the screen remains blank

Hi Xkcdcode,
 
Welcome to Lenovo Community!
 
As per the query we understood that you are facing issue with No POST on your ThinkPad T410s.
 

Is there any beep sound when you switch on the system?
Have you checked removing system memory & CMOS battery once?
Check connecting external monitor once is there any output from that.

Hope this helps!
 
Best regards,
Hemanth Kumar




Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Follow @LenovoForums on Twitter!

Read other 5 answers
RELEVANCY SCORE 68.4

When powering up my Toshiba Satellite Pro P300, the screen remains blank.

Can anyone please be of help?

A:Satellite Pro P300 - Screen remains blank after powering up

Hi

What does this mean exactly? Can you see nothing on the internal screen or the Toshiba logo after you have powered on the notebook?

You can also test an external monitor. So you can determine what the reason is and maybe the internal screen must be replaced from an authorized service provider.

Read other 4 answers
RELEVANCY SCORE 68.4

My son's laptop monitor hasn't been coming on in a few days. When you push the power button the monitor lights up, and everything appears to be booting just fine, other than the fact that there is no picture on the monitor.  We have tried taking the battery out and doing the 30-1-2 test, and that did not fix the problem. We have also hooked his computer up to an external monitor and it works fine. Could it be the inverter? I do not want to rip the whole thing apart to replace this piece if it isn't that, and I honestly don't want to pay to have it fixed. Can anyone give me some advice? Should I just buy the new inverter and try it? Thanks in advance.

Read other answers
RELEVANCY SCORE 68.4

Hey Guys,

For the past 2 nights I've been getting this weird problem while playing games for which has never happened before. My monitor would just go blank like if its not getting any display, but my computer would be on, i would be still hearing the game sounds even TeamSpeak my friends can hear me and I can talk to them, then I would have to force restart to get back display....What gives?!

This has NEVER happened before, all my games run smoothly without any problems. Fifa 15, HoN, BF4, WatchDogs...nothing. Just since last night it started happening.

Can any help in providing some troubleshooting? Any other information or data needed please let me know.
*praying its not my graphics card*

Regards

A:Screen goes blank during games suddenly but computer remains on

Ok RaviR mate start by letting us know what the temps are for the machine. Use Speccy and post back results
Speccy - Download

However it does sound like either the GPU or monitor is on the blink

Read other 9 answers
RELEVANCY SCORE 67.6

I have tried resetting and tried a new memory stick to no avail. I think it is the graphics chip set but not sure. The next step is replacing the mother board (rather than trying to replace the graphic chipset) but would like to know if theblinking LED on the caps lock key is telling me anything. It blinks 5 times, pauses and blinks 5 times, and repeats this endlessly. Does anyone know what it means or have any other suggestions?ThanxR.J.

Read other answers
RELEVANCY SCORE 65.6

Hey so heres the issue

I have had my dv4 for just over a year and it worked fine up until about a week ago. Now whenever i turn it on all the lights will light up normally however the mute light, the caps lock light, and the num lock light will flash on and off simultaneously about once per second, and the fan will also come on full blast for a second or two at random intervals. The screen also will not come on and the computer itself wont boot up.

I have tried taking out the battery, or using it without the power cable, and even connecting it to an external monitor using an hdmi cable but it still wont work.

the specs on the computer are:
- 320 GB hard drive
- Intel Centrino 1.8Ghz processor
- Nvidea graphics card
- wndows vista OS

I have a ton of important data on the hard drive as well so if there is any way to retrieve it before having to go into the geek squad and pay to have it fixed it would be appreciated. Thanks
 

A:Blank screen on my hp pavillion dv4

Read other 10 answers
RELEVANCY SCORE 64.8

hi my name is thomas has anyone come across this fault

hp pavillion dv 6500 blank screen
 

A:Hp pavillion dv 6500 blank screen

It is an issue that has been reported before. How old is your DV6500? And what is the model number from the label on the back?
 

Read other 6 answers
RELEVANCY SCORE 64

On a Dell Latitude E6400 laptop running Windows 7 Ultimate 32bit, after choosing a user account and providing the password, it boots to a completely blank screen except for the mouse, which can be moved around normally.

Same problem with other user accounts. Same problem booting to Safe Mode.

When I press Alt+Ctrl+Del to try to get into Task Manager, nothing happens.

The screen looks normal when booting up; I see Windows starting, and see the normal screen for choosing a user account. It isn't until after choosing the user account that it goes blank.

This laptop was working normally until this morning.

What can I do to troubleshoot this?

A:Boots to blank screen

Update: I tried System Restore and still have the same problem. I tried System Restore twice -- once with the last restore point from when it was working normally, and again with the oldest restore point in the list, which was from about a week and a half ago. Same result in both cases; looks normal until after logging in, and then the screen is blank.

I thought I'd try a repair install but apparently I can't do that because it can only be done from within Windows, and I can't get there.

My wife has files stored in My Documents etc. If I run a clean install of Windows over the old broken Windows, will she lose those files, or lose access to them?

Read other 2 answers
RELEVANCY SCORE 64

Hi, I'm having a problem booting into Windows. Whenever I boot regularly the Windows logo screen will show, it'll look normal, then the screen will go black. No sound is played. My monitor on light stays constant. (It doesn't flash like there is no signal.) I've left it in this stage for hours, and there is no change.

If I try to boot into safe mode I'll see a list of system files then it'll hang at gagp30kx.sys. Once again I've left it in this stage for hours and no change.

I've tried to fix this myself. So far I've reinstalled Windows and reformatted then reinstalled. In both cases windows will boot and work normally for roughly eight boots. Then it'll return to the same problem. I've suspected this to be a software problem so I did the reformat and reinstall step three more times. The first time it stopped working after I installed Steam. The second and third time I installed steam successfully and it booted seven and nine times before the problem started. I did not install any new software before the problem started.

I haven't gotten any new hardware for years.

My Computer Specs:
A8V-E SE Motherboard
Athlon64 3700+ Processor
2GB Ram
250GB SATA2 Hard Drive
9800 GT Graphics Card

I also dual boot the computer with Xubuntu. If at all possible I'd like as much help as possible to go through the Terminal.

Thanks in advance.

A:XP Boots to a Blank Screen

What about video card updates or other windows updates for your machine?

Read other 14 answers
RELEVANCY SCORE 64

Having some problems with my dads desktop, shut it down earlier and now its booting up and asks for the start windows normally prompt, starts up then comes to a blank screen that only shows the mouse. Before it would just take a long time to boot but it would, Its a old sony vaio desktop. Thanks for the help~Baird

A:Boots to a blank screen

Try booting in Safe Mode, VGA mode ect... That's as much as I can help and I don't think it's the best diagnostic, but.. Besides, if it works, it should only be temporary...

Read other 4 answers
RELEVANCY SCORE 64

Whenever I try to boot my PC, it loads to a blank screen with only the mouse pointer visible. I tried to right click and pressed CTRL+ALT+DEL but nothing happens. I tried booting up up Safe Mode and Last Known Good Configuration as well, but still get the blank screen.

When I load Safe Mode, the words "Safe Mode" still appear on the screen corners. The top of the screen says "Microsoft ® Windows XP ® (Build 2600.xpsp_sp3_gdr.090804-1435:Service Pack 3)"

I have an HP system, which did not come with a Windows XP CD for me to try to boot the system. I can press F10 to get into HP System Recovery, but am not even sure if that will solve the problem.

I wasn't doing anything odd the last time I used the PC, so I'm not sure what could have happened. I have a lot of files on my hard-drives that I need access to as soon as possible and don't want to lose anything.

Can someone please help?

A:PC Boots up to blank screen

Hi,
Try to remove all external hardware devices except keyboard and mouse then restart the computer and check the status.
Please check if recovery console installed in the computer, So that you can try to fix the problem from there.

Read other 6 answers
RELEVANCY SCORE 64

Running 32 bit RC1 on a dual core 4GB box with 250+ GB HD.

Ran a CHKDSK /r because of error messages in Win 7 System log. Windows was operating OK at that point.

Now boots to blank screen with cursor which will move around using the mouse. Indicates some part of windows is loading.

Tried repair function from RC install disk. All results normal with last message indicating windows booted successfully.

See boot screens up until selection of OS. The only OS loaded is Win 7.

Third party utilities allow me to see files on drive.

Cannot get to safe mode.

Short of reloading Win 7 what suggestions would you have?

Thanks.
 

A:Win 7 boots to blank screen

Read other 8 answers
RELEVANCY SCORE 64

hi there this has been happening all week so here go's,soon as i power up the notebook it boots up for 15-20 seconds then the screen goes blank however if i unplug the power cord the screen comes on but soon as i plug the cord back in it still goes blank screen again but if i force a shutdown then everything works again but this happens everytime i unplug the ac adapter to go out with it and the ac adapter is working fine so i think its a internal problem in the notebook,the notebook is still under warranty, any help on this would mean alot thanks 

Read other answers
RELEVANCY SCORE 64

my laptop is showing this problem for last two days,whenever i am opening it after showing HP screen it shows a blank screen. I even tried opening it in safe mode but it dint started and shows the blank screen only.
Please suggest what can be the cause for this and how to resolve.

Would like to tell one more thing that on the same day i upgraded my RAM,it worked fine but in between it was showing blank screen but after 3-4 times it created this problem,so cn it b the reason fr the same or not.

Read other answers
RELEVANCY SCORE 63.6

Hi
I'm getting a blank screen when my computer boots up. Not even a Bios screen or anything. But, Win 7 seems to boot up fine in the background. I can hear the welcome chime in the background after a little bit.
I was in the process of putting in a new SSD when this happened. Tried to unplug it and restart, but same problem. Now I have everything else unplugged but the graphics card, and the old hdds. Still nothing but blank screen.
I'm wondering if it's the graphics card or the power supply that are spotty. Fan is spinning on the graphics card, but I'm not sure what to make of that by itself.
Not quite sure what to do now....

Details:
Mobo: Gigabyte 870A-UD3 AMD
CPU: AMD Phenom 2 X4 955 Black Edition
RAM: GSkill DDR3-1600 4GB
Graphics: MSI N460GTX Fermi
Power: OCZ Fatal1ty 550W modular
OS: Win 7 Ultimate OEM - clean install

A:Blank Screen, No Bios Screen, Win 7 boots fine, Now What?

You might have the splash turned off in the bios. Have you checked the settings in there. When the computer boots start hitting the button to get you into the bios seeing as you can't see it.

Read other 9 answers
RELEVANCY SCORE 63.6

I was recently playing CS:S online when the computer froze up entirely. I powered off.

Upon restarting, the computer got through POST and the Windows (XP Pro SP2) loading screen. At this point, the monitor went black, excepting for the mouse cursor, which is responsive. This has been the behavior in restarting since then. I've left it in this state for over an hour without any progress.

Using a Windows boot floppy disk and/or using Safe Mode does not help.

I'd like to retrieve my files at the least, and preferably get this computer back in working condition so that I can enjoy it over Thanksgiving.

Let me know if you've got ideas as to how to fix this.
 

A:Windows boots to blank screen

Read other 15 answers
RELEVANCY SCORE 63.6

Hi, I am having a problem with my computer. I have scheduled a chkdsk to take place the next time I restart my computer and when I restarted it, the problem started! After the Boot Screen finished booting nothing happens, the screen stays blank. I have left it for hours and still nothing happens. How can I solve this problem? I also wanted to mention that I have changed my boot screen using this tutorial. I didn't really have any problem after following that tutorial but I only wanted to mention that...

A:Vista boots to a blank screen!

That's probably why your screen is black because you changed the boot screen. There is a warning near the top of the tutorial. You would have to change it back to normal.

WARNING
If you wanted to run chkdsk at startup or the Memory Diagnostic Tool and you have changed the default boot screen, then you will need to temporarily change the boot screen back to the default boot screen to be able to see what is happening first to be able to see what is happening when they run at startup.

Read other 4 answers
RELEVANCY SCORE 63.6

Hi guys I'm very new here and will deeply appreciate it you can help me with this problem.

I have one user in the office, his computer which has windows XP, boots up to a blank screen. It shows the manufacturer logo and windows XP splash screens but after that it just a blank screen. I also noticed that the Hard drive LED is chugging away as if it still is loading windows. But as I said the screen is blank.


Steps taken:

I have already unistalled the video driver. (Nvidia GeForce 8600 GT) and it works fine.
I re-installed the driver again using the CD that came with the video card and the same happens.
I uninstalled again the video driver and downloaded the newest driver for that graphics card from the Nvidia website, installed it and the same thing happens.
Right now I temporarily unistalled the video driver and the computer is working fine, but I need to install the video driver for this because the user has some applications that require that the driver be installed.


Please help?

Read other answers
RELEVANCY SCORE 63.6

Hello,

I have two questions that might be connected.
I wasn't sure about where to post this, because I'm not sure if the problem is my screen, windows 7 drivers, video card, bios or something else.

I used to have two screens connected to my computer, now I only have one (I think it has something to do with the problems).

Problem1: Every time I power my computer, the computer itself turns on, but the screen stays off until windows 7 loads, then the motor turns on.

Problem2: Many of the times I put my computer in sleep mode, and try to turn in back on, I hear the computer turns on, but the screen shows nothing.

The screen itself is fine, if I restart and let windows load properly, the monitor works.
I updated my video card drivers.
And now I don't know what to do, I want to format my computer and reinstall windows 7, but I can't get into BIOS and boot from USB / CD because the screen is blank when booting.


Please, help! :)

A:Computer boots with blank screen

It sounds like the splash screen is disabled. In System Configuration, Boot Tab, uncheck No GUI Boot .

Read other 7 answers
RELEVANCY SCORE 63.6

The user login page never appears after the Windows boot page. All I get is a blank dark blue screen. It was working fine yesterday. I haven't installed or changed anything recently. How do I troubleshoot this? I am new to Windows... Theresa

I have a Dell Dimension. BTW - I am really clueless - I don't know how to boot in "safe mode" or anything.
 

A:After Windows boots, I get a Blank Screen

Hi theresa111, Welcome to TSG!!

You get to safe mode by tapping the F8 key while the machine is booting.

Give that a try and let us know what happens.
 

Read other 3 answers
RELEVANCY SCORE 63.6

Hello people,
It has been a while since I posted. I have a Dell Inspiron N5050 laptop that is giving me fits. It was having an issue with explorer restarting continuously after it was upgraded from windows 7 by the customer. I recommended a clean install and backed up all their data and installed Windows 10. I pulled the latest drivers from dell.com and made sure I had them handy. At boot up the machine boots to a blank screen and boot chime plays. no mouse cursor and ctrl, alt, del do nothing. I found that if I press the power button and put it to sleep then wake it up with the power button it works fine. works for the whole time I am messing with it. If I reboot or power down I get the blank screen. I updated the chipset, video and audio drivers one at a time with a reboot each time and still no change. This only occurs during a reboot or cold boot. If the PC goes to sleep it wakes just fine.

I am at a loss as to the cause. There is no blue screen logs and I cant see anything wrong in the event viewer. No programs have been installed yet and Windows is fully updated.

Specs for the machine as follows:
Computer Model
Inspiron N5050

BIOS Vendor
Dell Inc.

BIOS Version
A03

BIOS Date ... Read more

A:Windows 10 boots to blank screen

I don't have this Laptop but looking at the BIOS A03 dated in 2011. Google it and the latest version is A05. You might want to update the BIOS first.

In addition, try to boot with one stick of RAM since they are not a matched pair (4GB & 2GB) and might create timing issue on cold boot.

Read other 2 answers
RELEVANCY SCORE 63.6

Hi when i start my computer, everything is fine harddrive, fans and everything, but my monitor stays blinking like if the computer is off and my mouse and keyboard arent lighting up either. I have had this problem happen to me before a couple of times when i was using the computer but i usually just restart and it works again. This time when i restart it gives me the same thing, ive tried switching monitors and still no go . Ive tried to attach my other computer to the same monitor and mouse and it works fine im on windows XP
 

Read other answers
RELEVANCY SCORE 63.6

I was at my girfriends last night installing a program and it said i needed to restart to complete installation. As i restarted and after the windows xp splash screen i was left with a blank screen with no mouse.

I turned off the power and turned the PC back on and i was given the option to start in safe mode etc.

I can open windows in safe mode, but am not sure what to do, however i have a feeling it is something to do with my video driver maybe?

I am not too sharp on things like this so any help will be much apprieciated.

Many Thanks

P.S. i have already tried the option: restart windows with last known good config.

A:Windows XP boots to a blank screen.

Hello will1992

Let`s try the easiest option first and see if it helps.

Boot into Safe Mode and try a System Restore.
http://bertk.mvps.org/
Restore to before you installed that program.

.

Read other 4 answers
RELEVANCY SCORE 63.6

My laptop will boot just fine but nothing comes on the screen. Its a bit older so I figured I had nothing to lose so I took it apart. When I did that, I found a piece (which I am not sure what it is) that was broken, and put it back where it obviously went. I booted the computer and the screen came on. I didn't have any drives in so it said "no drives found. " I thought I had found the culprit, so I put the drives back in, and now it won't work again. I've looked online every where to try and find out what the broken piece was or what it does, but can't find it anywhere. My best explanation of the piece is; its a black square
1" x 1", maybe 1/16" thick. It looks like it may be graphite or something. Does anybody have any ideas or suggestions?
 

A:Computer boots but screen is blank

Welcome to TSG...

Can you post a picture? Better yet a picture including where you put the piece to make the display work?
 

Read other 1 answers
RELEVANCY SCORE 63.6

A non-technical friend has asked me to look at his Toshiba Satellite Pro C70-A-159.

It was a Christmas present and has functioned perfectly for eight months ? two days ago (in his words) ?it won?t boot?. Actually it does, into a screen with no login but options for shutdown / restart / enable on screen keyboard etc (reading these forums, not an uncommon problem).

Safe mode works fine, even with network. Regressing the last three system restore points (one at a time) makes no difference. CHKDSK (at the DOS prompt) reports no problems. Service Station (in safe mode) won?t start as ?it may be corrupt ? please re-install or reboot?. I don?t know how to do the former (and am not sure it?s a good idea unless I know it will fix the issue), reboot makes no difference. Booting with logging or debug would maybe be helpful if I knew where it logged to!

I suspect he has upgraded to 8.1 from the Microsoft site, not Toshiba. Before I do a complete backup of data, regress to Windows 8 and follow the (quite complex) instructions for upgrading to 8.1 properly, is there anything else I can try?

A:Satellite Pro C70-A-159 boots to (almost) blank screen

Hi Adrian

I also think that you should test functionality with original ?factory settings?. Talk with your friend and ask him if there are some important data saved on his machine. Make backup and install original recovery image.

Here is short description - http://aps2.toshiba-tro.de/kb0/TSB2A03ES0000R01.htm
What you can also do before you start is to create recovery media, just to be sure you had it if something goes wrong. You can create this media using preinstalled Toshiba recovery media creator.

Reinstall original recovery image and check a bit how it works. Later you can upgrade it to Win8.1.
Here is Toshiba?s page about steps how to do this - http://www.toshiba.eu/innovation/generic/windows8_1-message/

I think your friend will be happy when you do all this and bring him back 100% working machine and Win8.1.

Good luck

Read other 2 answers
RELEVANCY SCORE 63.6

This is a somewhat elaborate problem, and I haven't been able to get to the bottom of it. Here's the story"

I'm running Windows XP Pro with SP1.
AMD64 3800+
GIGABYTE Dual BIOS 939 motherboard
OCV PLATINUM 3200 RAM (1 GB)

About a week ago I powered down my computer via the shutdown option in the start menu. It got hung up, so I shut it down manually. The next day when I turned my computer on, Windows informed me that my C:windows/system32/config/system file had been corrupted. I used the recovery console and replaced each of the five registry files using the method from the Microsoft support website.
Note: For debugging purposes, I took out an old hard drive and and attempted to install XP. It halted about 90% through the installation and reported a Machine Check Exception error. I had a slight overclock on the memory and had the voltages running 0.2V higher than normal. I changed the voltages back and tuned the BUS back to 200 MHz. This error is gone for the time being.
Anyway, when attempted to boot, Windows informs me that it was shutdown improperly and gives me the option of booting from safe mode, normally, from last know configuration. It does not matter what method I choose, Windows boots to a blank black screen with a mouse cursor. At the top and bottom of the screen is says what version of windows I'm running and that I'm running SP1 (and if I boot from safe mode, it says Safe mode too). I can move the mouse around, and theres nothing ... Read more

A:Windows XP boots to a blank screen

Read other 9 answers
RELEVANCY SCORE 63.6

Hello people,
It has been a while since I posted. I have a Dell Inspiron N5050 laptop that is giving me fits. It was having an issue with explorer restarting continuously after it was upgraded from windows 7 by the customer. I recommended a clean install and backed up all their data and installed Windows 10. I pulled the latest drivers from dell.com and made sure I had them handy. At boot up the machine boots to a blank screen and boot chime plays. no mouse cursor and ctrl, alt, del do nothing. I found that if I press the power button and put it to sleep then wake it up with the power button it works fine. works for the whole time I am messing with it. If I reboot or power down I get the blank screen. I updated the chipset, video and audio drivers one at a time with a reboot each time and still no change. This only occurs during a reboot or cold boot. If the PC goes to sleep it wakes just fine.

I am at a loss as to the cause. There is no blue screen logs and I cant see anything wrong in the event viewer. No programs have been installed yet and Windows is fully updated.

Specs for the machine as follows:
Computer Model
Inspiron N5050

BIOS Vendor
Dell Inc.

BIOS Version
A03

BIOS Date ... Read more

A:Windows 10 boots to blank screen

I don't have this Laptop but looking at the BIOS A03 dated in 2011. Google it and the latest version is A05. You might want to update the BIOS first.

In addition, try to boot with one stick of RAM since they are not a matched pair (4GB & 2GB) and might create timing issue on cold boot.

Read other 0 answers
RELEVANCY SCORE 63.6

I just put together a new decent computer for my old lady so she will stay off mine, well everything boots up and starts but the screen stays blank. What could be the problem? If you need more info just ask.

Specs:
Amd 4600+ x2
Gigabyte GA-M55plus-S3G (AM2)
Corsair XMS2 DDR2 (2 1024mb)
Maxtor Hard Drive SATA
evga nVidia 7900 GT KO (not installed)
500 watt psu
 

A:Comp Boots; Blank Screen

is your graphics card plugged in?
 

Read other 3 answers
RELEVANCY SCORE 63.6

Hello,
Thank you ahead of time for taking the time out of your day to help me with my problem.

Laptop information:
HP Pavilion dv2000
AMD 64 Athlon x2
Windows Vista

I am attempting to troubleshoot my laptop, it will not boot past a blank screen. I have tried the following troubleshoots already.

1) Connected external Monitor.
2) Performed a hard reset.
3) Disconnected the battery.
4) Checked the RAM connections
5) Checked the CPU connection.
6) Checked warranty with HP (expired of course!)

So far, the furthest I got was when I started it up ONCE, it said "Operating System Not Found" which was flashing. It never happened again, just once.

I read on a forum that the AMD motherboards in this computer were recalled but I cannot find that forum again, nor can I find any relevant recall information on HP's site. Anywho, just wondering if any of you have any ideas for me to help resolve this issue.

(If possible, I would OBVIOUSLY like to retain the files on my computer. I am a realist and realize this probably is not possible, hahaa)

Thank you ahead of time,
Newman4185!
 

A:HP DV2000 boots blank screen

does it use geforce graphics? cause there's been alot of complaints of faulty nvidia cards in hp laptops.

btw, just buy a $20 SATA / IDE to USB converter and you can retain all your data in your notebook, as long as the hard-drive is not defective.

example

or just buy a cheap 2.5" SATA HDD enclosure and mount your laptop HDD there.
 

Read other 9 answers
RELEVANCY SCORE 63.6

Hi, not sure if this is the right board for this, move if not.

Basically my Windows XP SP 3 boots up into a blank blue screen. Safe Mode is a blank black screen with safe mode displayed around it.

A few days ago I was having a problem with AppleMobileDevices.exe preventing programs being opened, so i used System Restore, got Registry Booster, and fixed some registy errors. Then my firefox crashed a day later, I restarted and thats about how it all came about.

Its worth noting that I had XP Proffesional installed over WMC 2005 in April as my computer was crippled by malware.

Now I cannot even get in to attempt to do anything.

Not much else details I can get right now, as i cant get any logs.

Any help would be appreciated

Thanks

A:Windows XP3 boots into a blank screen

Let it fully boot until you see not HD light activity, then hit FN+8 it may just light up. No guarantee but it has bailed me out a couple of times.

Read other 31 answers
RELEVANCY SCORE 63.6

(Notes: Not 100% certain of the OS, but I know it's something Windows 8) So the other day, I had to factory reset my laptop because it started freezing within minutes of loggin on. Wiped everything and had to re-download everything. After it reset, I situated my settings and everything and re-installed a few games and basic programs (iTunes and Chrome). It worked perfectly fine for another day, then my mouse pad froze (keyboard still functioned) so I just force quit the internet browser and forced it to shut down. Upon trying to restart it, I got the hp logo and circular "loading" icon, which lasts for about 3-5 minutes, and then it just goes to a blank screen. The fan is running pretty fast and everything seems to be capable of working, just a blank screen though. I tried hard resets, BIOS recovery and reinstalling the memory modules, all to no avail. Just ran a system extensive test and it reads:"Hard Drive Short DST Check: FAILEDFAILURE ID: 0LWD5A-7338GT-MFPV6J-60VG03PRODUCT ID: F9M03UA#ABAHard Drive 1" So what is going on here, why did this happen, and how do I fix it?

A:HP Pavillion 17-e113dx laptop - Blank screen, won't start

Hello, The failure indicates that the Hard drive has failed and needs to be replaced. If unit is covered by warranty please contact HP Technical support and get the part replaced. If unit is OOW and you need assitance kindly let me know.

Read other 1 answers
RELEVANCY SCORE 62.8

Happy New Year ! Everyone. My friend upgraded his Touchsmart 610-1210a to Win10 recently, and now it boots into blank screen after HP logo and Windows 10 icon with spinning circle. The screen is totally black except the white mouse cursor, which is movable. Have done following troubleshoot, still no luck. Has anyone had the similar issue on Touchsmart ? Can anyone tell me how to get into safe mode for this Touchsmart 610 at least ?  Thanks a lot. 1. Hard reset, unplug power cable from wall, hold power button for 15 seconds. 2. F10 into Computer Setup (BIOS), Apply Default and Exit. 3. F11 into System recovery, Recovery Manager wondows shows up       ---no restore point to do System Restore.       ---Startup repair cannot repair the computer.       ---System recovery --> Back your file first (my friend doesn't want to lose the files, 50G), plug in a 150G blank USB drive, formated as exFAT and NTFS, ----> Recevery Manager could not back up your files. 4. I got into "Choose an Option" screen once only, couldn't remember how now. Tried F8 on starting, or Shift on starting, or Shft + F8 on starting, all these keys doesn't bring up "Choose an Option" screen. When I was in  "Choose an Option" screen, Advanced options --> Start up --> F4 to safe mode, still black screen with ... Read more

Read other answers
RELEVANCY SCORE 62.8

A friend installed some device driver utility yesterday and used it to remove two drivers he thought were unnecessary. Today his mouse does not work. He tried Safe Mode with no luck. Then he tried to repair the OS using the WinXp Pro CD. Half way through it failed, so he brought it to me.

This computer is an Intel P4 2.8GHz running Win XP Pro with 1GB of dual-channel Ram.
It has two serial ATA hard drives.

I am sure a complete reinstall of the OS will work, but he doesn't want to lose any of his installed apps or documents.

It boots to a blank screen with the cursor in the middle of the screen. Nothing seems to work at this screen. Not even Ctrl-Alt-Del.

In safe mode the same thing happens except you see the "Safe Mode" text at the four corners of the screen, with cursor still stuck mid-screen.

I ran a diagnostic app on it in DOS and the mouse functions fine there, so it is not a hardware issue.

I have his computer connected to my home network but can not access it from the other computers as it never finishes booting up plus nothing is shared on it anyway.

Is there some way for me to access System Restore to go back to yesterday morning?

Or any other ideas on what else I could do?
 

A:Solved: XP boots to a Blank Screen with cursor only!

Read other 13 answers
RELEVANCY SCORE 62.8

I never saw this before. Brand new M900 out of the box connected to a Dell monitor, Windows 10. Boots up and does not make a connection to the monitor. Monitor says no input source. Changed monitors, cables, different connections (HDMI, etc). Multiple reboots of each of the different setups. Monitor(s) remain black. Connected to the internet, reboot with Dell monitor and monitor displays comes to life. I thought it just needed to find it's drivers. Registered the machine and powered down. Later, booted up the M900 ? monitor black again. Retried changing everything out again - no monitor. So I purchased a new Lenovo monitor. No luck, still a black monitor. I would appreciate any ideas.

Read other answers
RELEVANCY SCORE 62.8

My laptop boots & the screen appears. I make it to the point where Windows asks for the login password & then shortly after that the screen goes blank. The laptop stays on & there are no blinking lights anywhere on the keyboard, but the screen is dark. When it first boots, it seems like there is an orange hue to the diplay. I just replaced the CPU fan. Before that, it would boot but then die shortly after. The screen would go blank then, too, but the power would also shut off. I feel like there may have been some overheating before the fan finally died. Now that it has a new fan, the power stays on, but the screen still goes dark. I used an HDMI cable to hook it to my TV & the display is fine on the TV. It doesn't disappear like it does on the laptop. When I set it so that the display is supposed to appear on both screens, it appears on the TV & stays, but it flashes on the laptop for a second & then disappears.

Read other answers
RELEVANCY SCORE 62.8

My laptop boots & the screen appears. I make it to the point where Windows asks for the login password & then shortly after that the screen goes blank. The laptop stays on & there are no blinking lights anywhere on the keyboard, but the screen is dark. When it first boots, it seems like there is an orange hue to the diplay. I just replaced the CPU fan. Before that, it would boot but then die shortly after. The screen would go blank then, too, but the power would also shut off. I feel like there may have been some overheating before the fan finally died. Now that it has a new fan, the power stays on, but the screen still goes dark. I used an HDMI cable to hook it to my TV & the display is fine on the TV. It doesn't disappear like it does on the laptop. When I set it so that the display is supposed to appear on both screens, it appears on the TV & stays, but it flashes on the laptop for a second & then disappears.

Read other answers
RELEVANCY SCORE 62.8

Did a search but nothing came up.

I just installed a new 1TB WD Black Caviar and successfully loaded the OS. I was enjoying Prototype and all for a while. Then I decided I needed to get adaware and after installation induced a restart my machine wouldn't boot up on my TV. So I hooked up an old CRT monitor I had with a DVI adapter and what came up was a blank screen with just a cursor.

please help...

(thanks for any comments in advance)

A:win7 pro boots to blank screen with cursor. Please.. he

Nevermind Guys!. hehe... I unpluged the TV and used just the monitor and for some reason it booted up fine. If there is a way to delete this thread that'd be nice...

Read other 1 answers
RELEVANCY SCORE 62.8

Brand new T580 here, bought to run Qubes OS.Played around with Windows 10 for a while, downloaded the Qubes iso, put it on the stick, etc, the usual routine.Tried to boot from it, without success.Entered BIOS, played around with various settings, among others disabling secure boot and I *think* setting some video related parameter from 256 to 512. Also changed to boot order to have the USB HDD boot second after Windows.Anyway, saved my settings, tried to boot and got a blank screen. The only things that light up by default are the power and the Esc/FnLock leds, nothing else.The computer responds to Ctrl-Alt-Delete by rebooting, again to a blank screen.All other LEDs such as CapsLock etc light up, USB ports provide power (tried to connect an Android phone and it started charging)So I tried holding power button for X amount of seconds, I tried the emegency-reset pin - nothing, still a blank screen on boot.I removed the back plate, tried to boot without RAM, tried resetting it and setting it in another slot.I tried removing the coin-button battery and the internal battery for about a minute, I tried to boot without the coin-button battery installed.I tried to connect the computer to an external screen via HDMI - still nothing. I do not have a Thunderbolt/USB3 capable monitor to test the other video output.Not sure what else I can try. Start to think that the changed I've done have nothing to do with the problem at hand, it was just a coincidence. Some online searches, among othe... Read more

A:T580 boots to a blank screen after BIOS changes

Hi there,Does it show Lenovo boot welcome screen on poweron? If there is no even that and you tried already the BIOS clear It seems like the case for the service center. With the newset machines it is not impossible for the fiddling with the BIOS settings to cause a permanent system freeze. Recently we had a Dell workstation 5820 that behaved exactly like that, sollution was changing the Mobo under warranty. https://www.dell.com/community/Precision-Fixed-Workstations/Precision-5820-BIOS-crash/td-p/6033407

Read other 2 answers
RELEVANCY SCORE 62.8

Hello everyone. Thanks in advance for reading my post.

When I turn on my computer it boots up to a blank black screen with only the mouse pointer arrow showing.

A little history.....
Yesterday I purchased a DVD writer and installed it and it worked just fine. Today I ran spybot SD update and then ran the immunize feature which also seemed to work fine. At the same time I was updating itunes to Version 9.0 when I got a small windows error. I don't know exactly what it said because I didn't have time to read it but it had something about win32 and that it was malicious software and would shut down windows.

I've tried to boot up with my last known configuration that worked. I've tried safe mode, safe mode with networking. None of these do anything different. All I get is the blank black screen with the white windows mouse cursor (which I can move about the screen). Which does me no good ;) Any assistance would be greatly appreciated. Thanks very much. I have AVG on my computer but didn't run it last night - unfortunately I was in the middle of downloading some music and when it started the automatic system scan I stopped it (dummy) so that it wouldn't slow down my download. Wish I hadn't did that.

Thanks,

Amil Singh

A:Computer Boots Into Blank Black Screen Only - No OS

Take a look...Black Screen (fixmbr) - http://support.microsoft.com/?scid=kb;en-us;314503.The blinking cursor on black screen typically illustrates a MBR problem which is correctable by running the fixmbr command from the XP Recovery Console.Louis

Read other 6 answers