Over 1 million tech questions and answers.

BSOD usually first thing in the morning

Q: BSOD usually first thing in the morning

I leave my computer on all the time. Five or six times in the last month (but getting more frequent), the computer has restarted itself overnight and I am greeted with the message that there was an unexpected shutdown and the computer has restarted. I have never gotten the BSOD while using the computer. I noticed that my 1 TB Western Digital drive was not appearing in the file system the last few times the computer restarted itself so I replaced it yesterday with a 3 TB Western Digital drive; however I had the same message this morning. Any help would be appreciated.

RELEVANCY SCORE 200
Preferred Solution: BSOD usually first thing in the morning

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: BSOD usually first thing in the morning

Hi Shelley H,

Welcome to the 7forums.

Please run the DM Log Collector tool again, there are a few important files missing.
Before uploading the zip, please make sure it contains at least following files18 .txt,
1 .nfo
If it doesn't, please try booting in safe mode and run the DM Log Collector tool again.

Read other 5 answers
RELEVANCY SCORE 64.8

Last night I shut down and did hear it stop, this morning I went to turn on my machine and it was running. The task bar only had about 2/3 of the usual stuff loaded, I rebooted and all seems fine. When I shut down at night I have a habit of watching Windows Washer do its thing and listening for the computer to stop, I do this as I have inadvertently left it running a few times. Coming and finding it on and only partially loaded was odd, it has me thinking about a recent security update by HP. I bring up the update as it has slowed my load time and also now has added stupid HP pop up, there may be no relevance!

Phil

Read other answers
RELEVANCY SCORE 63.2

Hi there, If I shut down the computer and then want to restart by pressing the power button my computer starts up as normal. However if I don't restart till the next morning pressing the power button does nothing.
I then have to turn off the power at the power point wait for the standby lights to go out and then turn the power back on and press the start button on the computer once or twice and it starts as normal as if nothing has occurred, all very frustrating and inconvenient. would someone please be able to help with this problem. Many thanks.

A:Computer will not start first thing in the morning.

You say you turn off the power at the power point.

What is meant by power point?

Read other 9 answers
RELEVANCY SCORE 62

I have a client who indicated they have one of their 4 office pcs that, when starting up for the 1st time in the morning, will not connect to the internet. They say, they have to restart it again, and then it will connect, and subsequent restarts throughout the day work fine...

I am scheduled to check out this PC next week, so I wanted to see if anyone had any suggestions on what might be causing this, and/or what I should investigate?

This is a general use PC, which is only used a few times during the day (by multiple persons), and typically only for viewing web sites and checking email. With the exception of possibly one employee, users do not know much about PCs and I don't believe anyone has altered the PC settings. Up until about a month ago, this PC had worked flawlessly..

Thanks in advance for any suggestions you might have.

A:Win7 Startup 1st thing in the Morning won't connect to Internet

Check if they are also powering off their internet modem at night. I've seen cases where everything is powered off at night, in the morning they power the PC and Modem on at the same time, but the PC boots up faster than the modem connects and synch's with the ISP end. Thus there is no connection because the modem was not "ready". Subsequent PC boots are OK because the Modem is now ready for operation.

Generally, its best to leave the modem on at all times. But, if they want to power it off, they need to power it on first and wait until its "ready" and then power on the PC(s).

Read other 2 answers
RELEVANCY SCORE 50

Powered on my computer this morning. Windows starts to load. Desktop image appears and bang.

STOP: C000021a (Fatal System Error) The windows logon process system process
terminated unexpectedly with a status of 0xC0000005 (0x00000000 0x00000000)
The system has been shut down.

Turn the computer on again and now it is normal. No minidump was generated and no system error in Eventlog was created. This BSOD never happened to me.

Anyone?
 

A:New BSOD this morning

0xC000021A: STATUS_SYSTEM_PROCESS_TERMINATED

This occurs when Windows switches into kernel mode and a user-mode subsystem, such as Winlogon or the Client Server Runtime Subsystem (CSRSS), is compromised. Security can no longer be guaranteed. Because Win XP can?t run without Winlogon or CSRSS, this is one of the few situations where the failure of a user-mode service can cause the system to stop responding. This Stop message also can occur as a result of malware infestation or when the computer is restarted after a system administrator has modified permissions so that the SYSTEM account no longer has adequate permissions to access system files and folders.


Have you scanned for malware, etc.? Have you modified the system administrator?
 

Read other 9 answers
RELEVANCY SCORE 50

Zip files in bottom

Microsoft (R) Windows Debugger Version 10.0.10586.567 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.


Loading Dump File [C:\Memdumpmini042916-19765-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: srv*
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 7601.19135.amd64fre.win7sp1_gdr.160121-1718
Machine Name:
Kernel base = 0xfffff800`0305d000 PsLoadedModuleList = 0xfffff800`032a4730
Debug session time: Fri Apr 29 12: 06:51.754 2016 (UTC - 4:00)
System Uptime: 10 days 23:14:34.405
Loading Kernel Symbols
.

Press ctrl-c (cdb, kd, ntsd) or ctrl-break (windbg) to abort symbol loads that take too long.
Run !sym noisy before .reload to track down problems loading symbols.

..............................................................
................................................................
.................
Loading User Symbols
Loading unloaded module list
..................................................
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 1000007E, {ffffffffc0000005, fffff88003db0831, fffff880031cb6d8, fffff880031c... Read more

Read other answers
RELEVANCY SCORE 50

HP dv6 laptop
Intel I7
OEM Win7X64
upgraded to Win pro

Hello,
This forum has helped me in the past and I hope someone will analize the attached log file. The computer blue screens/(Driver-IRQL_NOT_LESS_OR_EQUAL) on boot.
1. I tried system restore and it seemed to restore, but did it again within moments and there were no restore points displayed.
2. I ran scannow until it was clean,
3. tried to uninstall norton on one sucessful safe boot
4. Ran chkdsk
see attached zip

Please help!

A:BSOD this morning

  
Quote: Originally Posted by Slick1983


HP dv6 laptop
Intel I7
OEM Win7X64
upgraded to Win pro

Hello,
This forum has helped me in the past and I hope someone will analize the attached log file. The computer blue screens/(Driver-IRQL_NOT_LESS_OR_EQUAL) on boot.
1. I tried system restore and it seemed to restore, but did it again within moments and there were no restore points displayed.
2. I ran scannow until it was clean,
3. tried to uninstall norton on one sucessful safe boot
4. Ran chkdsk
see attached zip

Please help!


Certainly not a clean install

several problems

1-iastor.sys your storage driver is both very old and corrupt. It needs re-installation with the newest available.

2-A lot of old drivers from as far back as 2005
these at least should be updated.

Code:
iirsp.sys 12/13/2005 16:47:54 0x439f418a fffff880`01287000 fffff880`01298000 0x00011000
adpu320.sys 2/27/2007 19:04:15 0x45e4c6ff fffff880`015cd000 fffff880`015fc000 0x0002f000
adpahci.sys 5/1/2007 12:30:09 0x46377921 fffff880`012fa000 fffff880`01350000 0x00056000
arc.sys 5/24/2007 16:27:55 0x4656035b fffff880`01397000 fffff880`013b0000 0x00019000
SiSRaid2.sys 9/24/2008 13:28:20 0x48da86c4 fffff880`01be0000 fffff880`01bee000 0x0000e000
sisraid4.sys 10/1/200... Read more

Read other 2 answers
RELEVANCY SCORE 50

I've received 6 BSOD's this morning while I've tried to get together enough information to submit this request for help. All have been of the watchdog type. The attached log has the first four BSOD's, but frustration prevented me from obtaining a more recent one. These have all occurred within the last two hours, and I finally had to copy the zip file from my useless Windows 8 computer to a working Windows 7 laptop. Any help would be greatly appreciated.

A:Six BSOD's this morning

You have a very old Video driver dated 9/12/2011, the latest is dated 02/18/2013. Please go to Drivers | GeForce to download the latest driver for your Geforce 8600GTS. Also your audio driver from creative lab is dated 6/3/2009.

and why are you using IE8 as stated in your system specs ?

Read other 9 answers
RELEVANCY SCORE 50

Hello there.

Im quite new in here so im gonna try to see if any one maybe have a solution for my problem.

Ok so my problem is:
When im turning on my pc, its booting as it should everything is fine. Until im on my "login screen". Then it suddenly gives me a Blue screen and restarts. When it restarts and entering the login screen once again there isnt any problem. I only gives me a BSOD ONE time each day and after that there isnt any problem with my computer, and it begins to irritate me abit now.

So now i have contacted a friend and he told me to fix a program called "Blue Screen View".

im reading the lines the program gives me and it gives me 2 light red'ed bars called:

ntoskrnl.exe+ 745fe
tcpip.sys+1719a0

I have looked around on google for this issue and it can be caused by several things. Some are saying its the network driver, some say other stuff.

I found out that if you use another software called "Windows Debugger tool" the .dmp file can be opened and then you can see abit more "specific" information about the error i'm getting.

So here is how far i am.

--------------------------------------------------------

ADDITIONAL_DEBUG_TEXT:
Use '!findthebuild' command to search for the target build information.
If the build information is available, run '!findthebuild -s ; .reload' to set symbol path and load symbols.

MODULE_NAME: nt

FAULTING_MODULE: fffff8000344f000 nt

DEBUG_FLR_IMAGE_TIMESTAM... Read more

A:BSOD in the morning

Hi and welcome to TSF please try running sfc /scannow or a start up repair
http://www.sevenforums.com/tutorials...e-checker.html
Startup Repair - Windows 7 features - Microsoft Windows
I have moved you to Bsod's,app crashes and hangs for further help

Read other 10 answers
RELEVANCY SCORE 50

Please help..Everything was fine until this morning....

060610-14773-01.dmp 6/6/2010 10:06:17 AM
BAD_POOL_HEADER
0x00000019 00000000`00000003
fffffa80`03661760
fffffa80`03661760
d7fffa80`03661760
PSINFile.sys
PSINFile.sys+4c2c x64 C:\Windows\minidump\060610-14773-01.dmp 4 15 7600

060610-15178-01.dmp 6/6/2010 9:47:53 AM SYSTEM_THREAD_EXCEPTION_NOT_HANDLED
0x1000007e ffffffff`
c0000005 fffff800`0312035b
fffff880`0331d8d8
fffff880`0331d140
ntoskrnl.exe
ntoskrnl.exe+c535b
NT Kernel & System Microsoft? Windows? Operating System Microsoft Corporation 6.1.7600.16539 (win7_gdr.100226-1909) x64 C:\Windows\minidump\060610-15178-01.dmp 4 15 7600

A:Two BSOD's this morning..Please help

  
Quote: Originally Posted by imagineyes


Please help..Everything was fine until this morning....

060610-14773-01.dmp 6/6/2010 10:06:17 AM
BAD_POOL_HEADER
0x00000019 00000000`00000003
fffffa80`03661760
fffffa80`03661760
d7fffa80`03661760
PSINFile.sys
PSINFile.sys+4c2c x64 C:\Windows\minidump\060610-14773-01.dmp 4 15 7600

060610-15178-01.dmp 6/6/2010 9:47:53 AM SYSTEM_THREAD_EXCEPTION_NOT_HANDLED
0x1000007e ffffffff`
c0000005 fffff800`0312035b
fffff880`0331d8d8
fffff880`0331d140
ntoskrnl.exe
ntoskrnl.exe+c535b
NT Kernel & System Microsoft? Windows? Operating System Microsoft Corporation 6.1.7600.16539 (win7_gdr.100226-1909) x64 C:\Windows\minidump\060610-15178-01.dmp 4 15 7600



We need the actual DMP file. use these to find it and upload it to us. http://www.sevenforums.com/crash-loc...d-problem.html

Ken

Read other 7 answers
RELEVANCY SCORE 50

One of my users, had a BSOD twice this morning, within an hour. Says she only had Outlook, IE, Excel, and an accounting program open both times. She did not write down the error message. So all I have is the Zip file created from the SF Diag tool. Any help would be appreciated.

A:BSOD twice this morning

It is a hardware failure. intelppm.sys

Your intel processor fails. Download the processor driver utility from http://downloadcenter.intel.com/Default.aspx

Norton is also causing problems there - teefer2.sys . I would suggest you to get rid of Norton, and to use Microsoft Security Essentials - Free Antivirus for Windows .

It is highly recommended that you get rid of norton firewall, out of your 14 dumps , 12 indicated to symantec .

Read other 2 answers
RELEVANCY SCORE 50

Zip file in bottom

Microsoft (R) Windows Debugger Version 10.0.10586.567 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.


Loading Dump File [C:\Memdumpmini042916-19765-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: srv*
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 7601.19135.amd64fre.win7sp1_gdr.160121-1718
Machine Name:
Kernel base = 0xfffff800`0305d000 PsLoadedModuleList = 0xfffff800`032a4730
Debug session time: Fri Apr 29 12:06:51.754 2016 (UTC - 4:00)
System Uptime: 10 days 23:14:34.405
Loading Kernel Symbols
.

Press ctrl-c (cdb, kd, ntsd) or ctrl-break (windbg) to abort symbol loads that take too long.
Run !sym noisy before .reload to track down problems loading symbols.

..............................................................
................................................................
.................
Loading User Symbols
Loading unloaded module list
..................................................
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************... Read more

Read other answers
RELEVANCY SCORE 50

Greetings. I have, unfortunately, had 5 crashes this morning, shortly after one another. I have downloaded and utilized the SF Diagnostic Tool and am attaching a zipped copy of the report. Any and all assistance with this issue will be greatly appreciated.
Thank you in advance.
Ken

A:5 BSOD this morning

Hi there,

Things to do:

If you're over clocking any hardware, reset it to the default value.Make sure Windows is up-to date.Run SFC /Scannow to check/repair file system integrity. Full tutorial here: SFC /SCANNOW Command - Run in Windows 8Run chkdsk to repair any errors on the hard drive. Full tutorial here: CHKDSK - Check a Drive for Errors in Windows 8If the above option fails, enable Driver Verifier to find out which driver is causing these BSODs and upload the dump files again. Here's how to enable Driver Verifier: Driver Verifier - Enable and Disable - Windows 7 Support Forums

Bugcheck Analysis:


Code:
ADDITIONAL_DEBUG_TEXT:
You can run '.symfix; .reload' to try to fix the symbol path and load symbols.

MODULE_NAME: win32k

FAULTING_MODULE: fffff801c4274000 nt

DEBUG_FLR_IMAGE_TIMESTAMP: 509b2e0d

EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.

FAULTING_IP:
+0
00000000`7579a000 ?? ???

CONTEXT: fffff8801b9a9bf0 -- (.cxr 0xfffff8801b9a9bf0)
rax=0000000000000001 rbx=ffffffffffffffff rcx=39422e16e0fa0000
rdx=0000000028000000 rsi=000000000000003c rdi=0000000000000000
rip=000000007579a000 rsp=fffff8801b9aa5f8 rbp=fffff8801b9aa700
r8=0000000028600080 r9=00000000ffffffff r10=0000000000000000
r11=fffff8801b9aa190 r12=fffff960003f23c0 r13=fffff90100698cc8
r14=0000000000000028 r15=fffff901007b1018
iopl=0 nv up ei ng nz na po nc
cs=001... Read more

Read other 12 answers
RELEVANCY SCORE 49.6

Hello first of all a quick introduction my name is Erik and i am new to Windows 8.
I recently installed 8 maybe 2 weeks ago the professional edition that i purchased. And i encountered a new problem.
Usually every morning i wake up from leaving computer on i wake up to Verifying pool data and it doesn,t boot until
i restart the computer. I have my Dump files and I'm going to post them. I like windows 8 a lot and wouldn't want to
go back to 7. I would be thankful in any kind of help Thanks, Erik

A:Bsod Every Morning i wake up

The uploaded reports are't complete. Please rerun the collection app and let it run for at least 15 minutes (or until the app itself tells you that it's done). Then zip it up and upload it with your next post.

Your BIOS dates from 2011. Please check at the manufacturer's website to see if there are any BIOS updates available for your system. Also check the readme file to see if they apply to the problems that you are having. Please be advised that flashing the BIOS is a very unforgiving process - and one mistake can physically damage your motherboard.

Your Acronis program dates from 2011 - please make sure that it's a version that's compatible with Win8 (the oldest driver dates from July of 2011, Win8 was released on 26 Oct 2012).

One of the memory dumps blames your ATI video drivers.
Please update them to help rule this out. If they are already the latest version; please uninstall them and then install a freshly downloaded copy (to help rule out any corruption).

Please update these older drivers. Links are included to assist in looking up the source of the drivers. If unable to find an update, please remove (un-install) the program responsible for that driver. DO NOT manually delete/rename the driver as it may make the system unbootable! :

P17.sys Tue Apr 21 02:12:47 2009 (49ED63DF)
Creative SB Audigy LS
http://www.carrona.org/drivers/driver.php?id=P17.sys

afcdp.sys Wed Jul 20 10:46:03 2011 (4E26EA2B)
Acronis File Level CDP ... Read more

Read other 8 answers
RELEVANCY SCORE 49.6

Hello,

I have bluescreen problem about 6 mounts. i try everyting what i know but no solutions.

i get bluescreen every start 2-3 times , than computer starts normally and no errors. when i finished my work i shutdown my computer and every morning same problem again.

1-2 mounts later computer can't start and blue screen seriosly.

i reinstalled my windows 7 many times , i changed my mainboard (because i think its about mainboard and memory conflict), i used 2-3 different memory test program and no errors. unplug all HDD except main, unplug all usb devices , remove sound card but no solution every time same problem.

Finally i read Mr.jcgriff2 posts and used BSOD_Vista_v2-2_jcgriff2_ batch file .

i really need help

A:BSOD Problem every morning

bump!

Read other 4 answers
RELEVANCY SCORE 49.6

Every morning this system crashes, then reboots sometimes tells you the Bios changed Y/N, sometimes chkdsk, sometime starts OK. All I can find is the ntoskrnl.exe caused the crash. This issue has been going on for the past several weeks. PC was on 24/7 and recently I've turned it off at night and discovered the problem. I can shutdown mid day and starts OK

I've run Memtest86, Who Crashed, I/O Bit Advanced System Care and Debugging Tools for windows x64 and cannot identify the exact cause, any help would be sincerely appreciated.

zip file is attached,

Ken

A:BSOD Every Morning, ntoskrnl.exe

  
Quote: Originally Posted by pdmken


Every morning this system crashes, then reboots sometimes tells you the Bios changed Y/N, sometimes chkdsk, sometime starts OK. All I can find is the ntoskrnl.exe caused the crash. This issue has been going on for the past several weeks. PC was on 24/7 and recently I've turned it off at night and discovered the problem. I can shutdown mid day and starts OK

I've run Memtest86, Who Crashed, I/O Bit Advanced System Care and Debugging Tools for windows x64 and cannot identify the exact cause, any help would be sincerely appreciated.

zip file is attached,

Ken


These crashes were caused by memory corruption (probably Related to dataserv.exe Single-user I*net Data Server Communications Component from Pervasive Software Inc.) Please run these two tests to verify your memory and find which driver is causing the problem.

If you are overclocking anything reset to default before running these tests.
1-Memtest.





Quote:
*Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Memtest86+ - Advanced Memory Diagnostic Tool

*Boot from the CD, and leave it running for at least 5 or 6 passes.

Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot.

Test the sticks individually, and if you find a good one, test it in all slots.

Any errors are indicative of a memory problem.

If a known good stick f... Read more

Read other 9 answers
RELEVANCY SCORE 49.6

Hey guys,
Just signed up for your expertise.

Here is the info:

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.256.1
Locale ID: 1033
Additional information about the problem:
BCCode: 19
BCP1: 00000003
BCP2: 85101688
BCP3: 00000000
BCP4: 85101688
OS Version: 6_1_7600
Service Pack: 0_0
Product: 256_1
Files that help describe the problem:
C:\Windows\Minidump\082510-19952-01.dmp
C:\Users\Ben\AppData\Local\Temp\WER-34023-0.sysdata.xml

This happened on:
W7 32bit, AMD Phenom 9500 Quad-Core 1.8ghz.

8.00GB ram installed, 3.25GB Usable. (I just put the extra two 2gb sticks in before the bsod, I know its pointless running them in 32bit bit I was planning to do a clean install of 64bit tonight.)

Nvidia GeForce GTX 9800/9800 GTX+

It happened last night whilst refreshing the windows user experiance rating, a small box poped up from the tray saying the graphics driver had been lost and recovered, that was after the screen blacked out for about 1.5 seconds.

Any help wound be great guys thanks
Ben

A:BSOD this morning, Annoying!! Help?

Hey Ben,

Welcome to Seven Forums! Glad to have you here!

Please follow these instructions for the proper posting of BSOD's here.

Thanks,
Ben

Read other 9 answers
RELEVANCY SCORE 49.6

It's been almost 3 years since I needed Bleeping Computers to diagnose my problem, I'm back now with Windows 8 problems... Yay.
 
Anyways when booting the laptop this morning I was greeted with a BSOD with error "SYSTEM_THREAD_EXCEPTION_NOT_HANDLED (Wdf01000.sys)". Last night I put the computer into hibernation with my browser open, so it should have been waking from that.
 
Specs:
Intel i7 3740QM
16GB Kingston RAM
Nvidia GeForce GTX 675MX
Seagate Momentus XT 750GB
The laptop is based upon a Clevo P150EM
 
I'll attach a zip with a minidump.
 

A:BSOD upon booting this morning

Hi
 
Did you use or used any joystick with your laptop ?.

Read other 4 answers
RELEVANCY SCORE 49.6

Good morning (afternoon),

I recently bought a laptop (2 days ago) and just now have had the BSOD appear twice. This is my first time using Windows 10 and from what I have googled about it, it's got me worried.

I have installed steam & updated the nVidia Driver but other than that I haven't done anything to it. I ran a full system scan on the McAfee provided and nothing came up.

Any help is appreciated and thanks in advance.

Regards,

DESKTOP-B05JI79-Sat_16_01_2016__81637_66.zip

A:BSOD - crashed twice this morning

Diagnostic Test

 DRIVER VERIFIER

   Warning
Please make a backup of your important files and get your rescue media or create one.
Please create a restore point.
Please follow this tutorial to run driver verifier.

Some windows drivers are blamed in a few crashes, but that usually means that a 3rd party driver is actually the cause.
Driver verifier stresses your drivers and will crash your pc if any driver fails due to a violation.

Driver verifier should be performed for a max of 48 hours, or when you have a bluescreen, whatever comes first.

If driver verifier has found a violation and you can't get back into windows normally, try to boot into safe mode and reset in safe mode driver verifier, or in the troubleshooting options open command prompt and type verifier /reset.


   Note
Your system will act very sluggishly while driver verifier is enabled, this is normal as your drivers will be being subjected to heavy testing in order to make them crash.



Diagnostics Test

 System File Check

Please try following:
Open an admin command promptCopy/paste "sfc/scannow" (without quotes) and press enterWhen it finished reboot your systemOpen again an admin command promptEnter sfc/scannow again
If sfc/scannow does NOT say "Windows Resource Protection did not find any integrity violation" after the second SFC, please upload the cbs.log file located at {windows partition}\Windows\Logs\CBS\, if the file is t... Read more

Read other 0 answers
RELEVANCY SCORE 49.6

Hey Guys, I cant seem to figure this out myself so I decided to make a post on here hoping someone would be able to help me out.

Every morning when i start my PC (Alienware Aurora, Windows 7) im getting a BSOD after one or two BSOD's my computer just works like normal and i dont get any BSOD during the day, but the next day the exact same thing happens BSOD all over again.
If there is someone who could help me out i would forever be thankfull !!

Here are 2 screenshots of the BSOD's:
imgur: the simple image sharer

And a link to my Minidump files:
https://www.mediafire.com/?zp4iz5173nvhfvo

A:Getting BSOD every single morning

Hi,

PAGE_FAULT_IN_NONPAGED_AREA (50)

This indicates that invalid system memory has been referenced.

Bug check 0x50 usually occurs after the installation of faulty hardware or in the event of failure of installed hardware (usually related to defective RAM, be it main memory, L2 RAM cache, or video RAM).

Another common cause is the installation of a faulty system service.

Antivirus software can also trigger this error, as can a corrupted NTFS volume.


Code:
DEFAULT_BUCKET_ID: CODE_CORRUPTION
So we have code corruption, but what kind?


Code:
MEMORY_CORRUPTOR: ONE_BIT
Our type of memory corruption is known as one bit, which is exactly what it sounds like. A single bit is changed from 8 to 9 for example, or from 0 to 1. It can be caused by software or hardware, but it's mostly an indicator of faulty RAM.

With this said, I'd like to skip right to running Memtest for NO LESS than ~8 passes (several hours):

Memtest86+:

Download Memtest86+ here:

Memtest86+ - Advanced Memory Diagnostic Tool

Which should I download?

You can either download the pre-compiled .ISO that you would burn to a CD and then boot from the CD, or you can download the auto-installer for the USB key. What this will do is format your USB drive, make it a bootable device, and then install the necessary files. Both do the same job, it's just up to you which you choose, or which you have available (whether it's CD or USB).

Do note that some older generation motherboards do not support US... Read more

Read other 1 answers
RELEVANCY SCORE 49.6

Hi all,

I'm new to this, but everything I read online said this was the best place to start with this. I followed the instructions on creating and attaching a BSOD zip file, so hopefully this works and hopefully someone can help me. Thank ya kindly.

A:BSOD on Startup This Morning

Free up the startup. Windows does not need any other program to auto start with it, but the auto start programs often conflicts and causes various problems including BSODs.
Click on the Start button
Type ?msconfig (without quotes), click the resulting link. It will open the System Configuration window.
Select the ?Startup? tab.
Deselect all items other than the antivirus.
Apply > OK
Accept then restart.
Report us for any further BSOD. There are some failing modules (like display and antivirus), but a boot time BSOD is all possible with that much garbage in startup. A closer look will be needed at a clean environment.

____________________________________

Code:
BugCheck 4A, {77cb132a, 2, 0, fffff8800760dca0}

Probably caused by : ntkrnlmp.exe ( nt!KiSystemServiceExit+245 )

Followup: MachineOwner
---------

Read other 3 answers
RELEVANCY SCORE 49.6

Hi There

I have recently built a new desktop, of which the specs are attached.

I have tried almost everything I can think of to fix this, but need help with more ideas.

Basically my PC crashes every morning when I turn it on within the first 5 -10 minutes. I generally get 2 BSOD's and then it runs fine for the rest of the day. I have attached the last 4 BSOD minidumps which all appear to point to ntkrnlmp.exe.

It runs Windows 7 Professional 64 bit. I have updated all drivers and have no conflicts. I have updated the BIOS (F4) and chipset, including ethernet driver. I have checked the RAM setting. Spec said 8-8-8-24 and BIOS indicates 9-9-9-24 which is fine. I have changed the DRAM Voltage from 1.5 to 1.66 as recommended by Corsair.

I have run memtest but only for a few hours with no errors. Currently I have pulled out one stick of RAM and will see if that helps tomorrow.

Any suggestions that could be causing this would be appreciated.

All BSOD's Have the same code..... MEMORY_MANAGEMENT and code 0x000000001a

Thanks in advance

A:BSOD Every Morning Windows 7

I've been noting problems with the Gigabyte GA series of boards (similar to the Asus P5 series). It seems that there are special voltages/timings/settings needed for the RAM. Check with Gigabyte and Corsair for the suggested settings.

I would start the memory test with the first boot in the morning - that way you'll replicate the conditions that occur during the BSOD's. Let the test run all day long - and maybe even overnight. The longer the better in this case. If you get any errors, it's OK to stop the tests immediately. Once the memory test is done with no errors - please don't change the settings unless you discuss it here first.

Another thing to try is to boot directly into Safe Mode the first thing in the morning. If this is a system service issue (as I suspect) then the boot into Safe Mode should work without issues.

Also, these older drivers are on your system:

Code:
timntr.sys Fri Sep 12 10:49:48 2008
tifsfilt.sys Fri Sep 12 10:50:44 2008
Please uninstall Acronis True Image, it's possible that the older drivers that it uses could be causing the issues.

Read other 2 answers
RELEVANCY SCORE 48.8

Good evening,

I received a BSOD this morning at around 9:00 AM. I was not at my desktop when it occurred. The last known BSOD that I had occurred a few months back and it was likely related to not updating a wireless network card. Any help would be appreciated.

Attached to this message is the dump file that was generated this morning. Any assistance with this matter is greatly appreciated.

Thank you in advance.

Read other answers
RELEVANCY SCORE 48.8

Just a little background info on the computer.. the MOBO and Memory are new this week.. trying to get it stable but am having some issues. Memtest runs with no errors and any stress test I run on the computer passes with flying colors.

Attached is many files needed to diagnose the problems I will detail below.

In the morning when I try and start my computer I tend to get some errors until my computer has had a little time to wake-up I should say. I turn on the power get to the log in screen and either while typing or after pressing enter on submitting my password I get a MEMORY_MANAGEMENT BSOD. This only happens in the morning when my computer has not had enough efficient time to wake-up I guess because once its running fine it works all day long.

MEMORY_MANAGEMENT is only the BSOD I have seen lately since putting my comp together.. but I have gotten PAGE_FILE_IN_NONPAGED_AREA and SYSTEM_SERVICE_EXCEPTION. I have another motherboard and set of memory in the mail for my second computer but I would like to know 100% that this is a hardware issue not a problem I can fix.

Any details or questions you have please direct them to this thread or PM's and I will get back to them ASAP and to the best of my abilities.

Thanks.

A:BSOD When Starting Computer in the Morning.

We need the .dmp files for analysis... Blue Screen of Death (BSOD) Posting Instructions

Read other 9 answers
RELEVANCY SCORE 48.8

I was doing nothing exiting, just browsing forums, when the crash occurred. In fact the computer has been on but idle for some while, whilst I was otherwise occupied. FWIW only other item active was our internet radio.

Can you kindly examine dump file to see what and how serious the crash evebt was.

A:BSOD this morning, but first for a long time.

It is some file system failure.

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 1E, {ffffffffc0000005, fffff880010b08ab, 0, ffffffffffffffff}

Probably caused by : fileinfo.sys ( fileinfo!FIPfFileOpenRemove+5b )

Followup: MachineOwner
---------
And a deeper search reveals that it is caused by avast! File System Minifilter.

Code:
fffff880`08c43b38 fffff880`0647a349Unable to load image \??\C:\Windows\system32\drivers\aswMonFlt.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for aswMonFlt.sys
*** ERROR: Module load completed but symbols could not be loaded for aswMonFlt.sys
aswMonFlt+0x2349
It might be a simple glitch. So better you wait and observe if the BSODs recurs or not. If not, well and good.

But if it recurs, Uninstall Avast using Avast Uninstall Utility. Use Microsoft Security Essentials as your antivirus with windows inbuilt firewall, and free MBAM as the on demand scanner.

Download, install and update those, and then run full system scans with both of them, one by one.

Let us know the results.

Read other 4 answers
RELEVANCY SCORE 48.8

My boss's computer at work is driving me mad.

It seems that once every week or two weeks, when he comes into work in the morning, and then tries to wake up the computer, it end up going into BSOD.

I have to hold the power button down to turn it off, and then when i turn it on again, it reboots fine. It has NEVER crashed while he was using it. Only once in a blue moon first thing in the morning.

I have re-installed windows, and same problem surfaces after about a week.
I have even put in a new image that is made by the IT team, and it still crashes.
I have since replaced the desktop with a different one (same make, model), but after about a week, same thing happens.

So I am thinking that it is either some software he is using/installed, or a driver?

I have also swapped out the ram, and still no joy.

I would be forever grateful if someone could tell me what the heck is causing the BSOD. Thank you,

-Sage

A:BSOD sometimes when waking computer up in the morning

I have also replaced this computer with one fresh out of the box. Unfortunately, NYC dept of Ed has Lenovo put on all programs in a common image for all of their computers.

We also have about 30 of these computers, and they all work fine, except for this. I have even swapped computers, swapped drives, and the common denominator seems to be the user and the programs they use or the drivers for the specific peripherals that they have.

Again, thank you for any helps.

Read other 8 answers
RELEVANCY SCORE 48.8

Hi, thank you for having a look at this post. I'm struggling with not many choices left of what I can do.

This is my first attempt at building a pc and i thought it all went a bit too well. Next morning and every morning since (i.e. after the pc has been off for several hours), I get the dreaded BSOD as soon as Windows 7 loads up.

After deliberation and price constraints I decided upon:

Windows 7 professional 64
AMD Phenom II X2 555 Black Edition 3.2GHz Socket AM3 6MB Cache Retail Box Processor
Asus M4A88TD-V EVO/USB3 880G Socket AM3 8 Channel Audio ATX Motherboard
TW3X4G1333C9A - 4GB (2x2GB) Corsair XMS3 Classic, DDR3 PC3-10666 (1333) Non-ECC Unbuffered, CAS 9-9-9-24, 1.50V
Corsair 400W CX PSU - 12cm Fan 80Plus Certified Efficiency 6x SATA 1x PCI-E

All seem to work well after the initial daily hiccup. It will BS a couple of times then be fine till the next day.

I've ran prime 95 for a couple of hours and memtest overnight and no errors came up.

As I bought these components separately Iím not sure where I stand on warranty as all the parts were purchased individually and even collectively i guess are operational.

I'm assuming its hardware as I have reinstalled Windows 7 pro 64 two days ago and got the BSOD again the very next day.

If someone manages to get to the bottom of this I would feel like kissing them, but instead will jump around the room for a moment and offer a firm handshake.

Thank you once again for taking the time to consider this.
 ... Read more

A:Solved: BSOD every morning on my 1st PC build :( HELP please

Read other 9 answers
RELEVANCY SCORE 48.8

So I started up my PC this morning and logged myself into Windows, then went downstairs to use the bathroom, etc. When I got back upstairs, the PC was at the login screen again, which I knew meant the worst.

Checking Event Viewer revealed that the computer BSOD'd twice in the time I was gone, both times evidently with the "CRITICAL STRUCTURE CORRUPTION" BSOD pointing to ntkrnlmp.exe. I have been free of random BSODs for a little while now and I thought everything was back to normal, but I guess not?

I have uploaded the dump file from today. Another old one got in there by accident, please ignore that one.

Another post asked about voltages in the BIOS, could that be a problem too? If so, how do I change that?

A:ntkrnlmp.exe CRITICAL_STRUCTURE_CORRUPTION BSOD twice this morning

The dump isn't very helpful.

Code:
Probably caused by : Unknown_Image ( ANALYSIS_INCONCLUSIVE )
Please remove ASUS software if any is present as some are known for causing bluescreens, and try following
Please uninstall everything of AMD using Display Driver Uninstaller and install new drivers from AMD. Be sure to ONLY install the display drivers using custom/advanced options.

Code:
AsUpIO Tue Aug 03 04:47:59 2010 (4c57835f) AsUpIO.sys // ASUS softwareAsIO Wed Aug 22 11:54:47 2012 (5034ac67) AsIO.sys // ASUS software
AODDriver2 Tue Feb 11 12:06:52 2014 (52fa044c) AODDriver2.sys // AMD overdrive, known for causing bluescreens

Read other 0 answers
RELEVANCY SCORE 48.8

Hello,

I put my HP 8540p to sleep every night and always come back to a BSOD "DRIVER_POWER_STATE_FAILURE". I have run all Windows Updates, HP Updates, and antivirus scans. My troubleshooting skills do not go any further than this. I have followed the instructions for BSOD postings, and the output zip folder is attached.

Please let me know if you have any questions, and thanks!

A:BSOD Every morning after computer sleeps

Please upload your msinfo32.nfo file. To get this: Start Menu -> Type msinfo32 into the Search programs and files box -> When it opens, go to File, Save -> Save as msinfo32.nfo and save in a place you will remember -> Let it finish the process of gathering and saving the system info -> Right click the .nfo file, click send to compressed (zipped) folder -> Upload the .zip file here.


Please upload your msinfo32.txt file. To get this: Start Menu -> Type msinfo32 into the Search programs and files box -> When it opens, go to File, Export -> Save as msinfo32.txt and save in a place you will remember -> Let it finish the process of gathering and saving the system info -> Right click the .txt file, click send to compressed (zipped) folder -> Upload the .zip file here.

Read other 9 answers
RELEVANCY SCORE 48.8

My pc is:
Windows 7 32Bit Ultimate Full
MSI 785GTM-E45
Phenom AM2+ Quad 2.3
1tb Samsung F3 HDD
Sata DVDR
2bg DDR2 800
Nvidia GTX460
700W PSU

This was on the first boot of the monring, restated and all was ok.

Any Ideas.

A:BSOD, First cold boot of the morning.

MEMORY_MANAGEMENT (1a)
0x1a_41790_nt!MiDeleteVirtualAddresses


Check if updates are available for:

amdsata.sys Wed Oct 07 16:13:04 2009
AMD AHCI 1.2 Device

ctxusbm.sys Mon Sep 07 13:59:10 2009
Citrix ICA Client



Test your RAM sticks for errors:

RAM - Test with Memtest86+


If you get more crashes, please attach the .dmp(-s).



Code:
Microsoft (R) Windows Debugger Version 6.12.0002.633 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.


Loading Dump File [F:\a\Minidump\D M P\112110-28392-01.dmp]

MEMORY_MANAGEMENT (1a)
# Any other values for parameter 1 must be individually examined.
Arguments:
Arg1: 00041790, The subtype of the bugcheck.
Arg2: c0802050
Arg3: 0000ffff
Arg4: 00000000

Debugging Details:
------------------


BUGCHECK_STR: 0x1a_41790

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

PROCESS_NAME: System

CURRENT_IRQL: 0

LOCK_ADDRESS: 83167f60 -- (!locks 83167f60)

Resource @ nt!PiEngineLock (0x83167f60) Available

WARNING: SystemResourcesList->Flink chain invalid. Resource may be corrupted, or already deleted.


WARNING: SystemResourcesList->Blink chain invalid. Resource may be corrupted, or already deleted.

1 total locks

PNP_TRIAGE:
Lock address : 0x83167f60
Thread Count : 0
Thread address: 0x00000000
Thread wait : 0x0

LAST_CONTROL_TRANSFER: from 830b540e to 830bbb2d

STACK_TEXT:
8af93408 830b540e 00260002 00bfcfff 85... Read more

Read other 1 answers
RELEVANCY SCORE 48.8

Hello,

I recently purchased this PC in April 2011 and pretty much from day 1 i have had the BSOD happen to me, i may go a week or so with out then all of a sudden i will get it several times a day and i haven't added anything new or run anything different from the other days, I have attached the files asked of me and will give as much information as i can on my PC

Windows 7 Home Premium 64 bit
Original Installation
Full OEM
Bought April 2011
OS Install - April 2011

Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz
1TB Hard Drive - 8GB RAM
System Manufacturer/Model Number: i7-2600-DH67BL-8G-1T

If you need further information please let me know, thank you in advance for your help.

A:BSOD Happens Regularly - 3 times already this morning

The best information I can give you for this type of error is this:
Code:
CLOCK_WATCHDOG_TIMEOUT (101)
An expected clock interrupt was not received on a secondary processor in an
MP system within the allocated interval. This indicates that the specified
processor is hung and not processing interrupts.
Arguments:
Arg1: 0000000000000019, Clock interrupt time out interval in nominal clock ticks.
Arg2: 0000000000000000, 0.
Arg3: fffff88003165180, The PRCB address of the hung processor.
Arg4: 0000000000000002, 0.





Quote:
Info on the STOP 0x101 error: BSOD Index

Best advice that I've seen about this error (from here: Win 7 A Clock Interrupt... BSOD (101 Error) )
Quote:
What you're looking for will be in one of the following categories:

a) BIOS bug
b) a driver whose activity is causing the target processor to lock up
c) a hardware defect (temperature, voltage, dust, RFI, outright borkedness...)
- H2SO4
So, check the drivers
Then check the inside of the case (temperature, voltage, dust, etc).
Then run some hardware stress tests Quote:
Try this free video stress test: FurMark: VGA Stress Test, Graphics Card and GPU Stability Test, Burn-in Test, OpenGL Benchmark and GPU Temperature | oZone3D.Net
Quote:
FurMark Setup:
- If you have more than one GPU, select Multi-GPU during setup
- In the Run mode box, select "Stability Test" and "Log GPU Temperature"
Cl... Read more

Read other 2 answers
RELEVANCY SCORE 48.8

Hi, I have gotten 2 BSODs and I'm not sure what the root cause is. I have attached the dump files if there is someone who can help analize them. I am running Windows 7 Enterprise x64 Full Retail. Thanks.

A:BSOD when I came back to my desk in the morning

Only 721 mB of RAM available (out of 4 gB) - way, way too much stuff running in the background/at startup
This is probably hampering the performance and may, indirectly, be causing the BSOD's

But, the BSOD's name hardware and NTFS.sys - so I first suspect the hard drive. Please run this free diagnostic on the hard drive: HD Diagnostic If that passes, then run the rest of the free diag's at this link: Hardware Diags

The only seriously outdated driver on the system is the Adobe file system filter drivers - which dates from 2008. In most cases this is from Adobe Reader, but you have more Adobe products so I'd have to suggest updating all of them.

Further info on BSOD error messages available at: http://www.carrona.org/bsodindx.html

The following info is just FYI, I've already addressed the issues that I saw in the above paragraphs
3RD PARTY DRIVERS PRESENT IN THE DUMP FILES

Code:

amdxata.sys Fri Mar 19 12:18:18 2010 (4BA3A3CA)
adfs.SYS Thu Jun 26 16:52:37 2008 (48640195)
Rt64win7.sys Thu Jan 13 06:57:19 2011 (4D2EE89F)
EtronXHCI.sys Fri Feb 25 12:51:52 2011 (4D67EC38)
HECIx64.sys Tue Sep 21 12:59:04 2010 (4C98E458)
igdkmd64.sys Sun Apr 10 14:50:59 2011 (4DA1FC13)
mbam.sys Wed Nov 02 09:07:48 2011 (4EB140A4)
EtronHub3.sys Fri Feb 25 12:51:55 2011 (4D67EC3B)
MpFilter.sys Mon Jul 12 16:27:48 2010 (4C3B7AC4)
RTKVHD64.sys Fri Feb 11 05:16:05 2011 (4D550C65)
IntcDAud.sys Fri Oct 15 04:28:17 2010 (4CB810A1)

http://www.carrona.org/drivers/driver.php... Read more

Read other 1 answers
RELEVANCY SCORE 48.8

I had 4 BSOD's this morning with the DPC_WATCHDOG_VIOLATION error.

Just had another crash here while typing this.

SIMONSONL-W10-Tue_07_26_2016_112245_58.zip

A:4 BSOD this morning. DPC_WATCHDOG_VIOLATION error

Hi LukeSimmy,

Please update Light Speed Systems software.

Code:
0: kd> lmvm LSMFWfp
Browse full module list
start end module name
fffff801`d66a0000 fffff801`d66bf000 LSMFWfp T (no symbols)
Loaded symbol image file: LSMFWfp.sys
Image path: \SystemRoot\system32\DRIVERS\LSMFWfp.sys
Image name: LSMFWfp.sys
Browse all global symbols functions data
Timestamp: Wed Oct 22 18:07:18 2014 (5447D636)
CheckSum: 00020C66
ImageSize: 0001F000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4

Please fill in your system specsPlease follow this tutorial and download the tool. The tool will give you detailed information about your system specs, please fill in your system specs more completely including PSU, cooling and other used stuff like mouse, keyboard, monitor, case, etc.
The PSU, cooling and other stuff are NOT mentioned in the tool.How to fill in your system specs:

Read other 1 answers
RELEVANCY SCORE 48.8

Hi,

my first post and it's a big problem I have. Thank you in advance for any kind of help.
My computer specs are these:

Windows 7 Ultimate 64bit (SP1 updated)
Motherboard: Gigabyte EX58-UD5
Chip: Intel i7 920 2.67GHz
RAM: 12 GB (6sticks of 2Gb each)
Graphics card: nvidia gtx 285
HDD: 5 HDDs

Freezing at fresh morning boot!
During the night I shut down my computer (saving some electricity and I'm not downloading much, lol).
At first boot it shows all RAM and disc at check in the 1st DOS window.
During the end of August 2012 it started to freeze every second day.
I have a Logitech G500 mouse which has lights on it for showing the scroll wheel speed. Those never turn off, except when the PC if off.
When it froze the lights went off (completely dead) and so did the keyboard (no caps lock light). Couldn't do anything except hard rebooting the system.
As I did that it showed only 8GB RAM.
I went into BIOS and upped the voltage of RAM, after investigating on the internet about the Gigabyte EX58-UD5 problems recognizing all RAM.

After that it was good for a week and than it started again. I started to manually up the voltage of the VVT, reading several forums, but never into the PINK area or even in the RED. I was allways carefull.

BSOD at the morning boot!
Now for the past 2 weeks I've experienced BSOD several times, every time in the morning boot.
I thought maybe I set the BIOS voltage too high and revert everything back to AUTO settings except the RAM voltage I left at 1.... Read more

A:BSOD on fresh morning startup.

Welcome

All your dumps are corrupted. Could you upload them again following the instructions carefully,
http://www.sevenforums.com/crashes-d...tructions.html

Read other 9 answers
RELEVANCY SCORE 48.8

Every day when I come back to my custom built PC, it recovered from a BSOD. I've attached a .zip with the "GrabAll" files.

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.256.48
Locale ID: 1033

Additional information about the problem:
BCCode: 50
BCP1: FFFFB8A012EF21E0
BCP2: 0000000000000000
BCP3: FFFFF80002C855EB
BCP4: 0000000000000007
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1

A:BSOD every day when I leave PC and come back next morning

It appears that most of the files from the SF Diagnostic tool are missing, please re-run and then re-upload the files that it generates.

Read other 5 answers
RELEVANCY SCORE 48.4

Hello experts...

I think I need some help on determing what causing BSOD of my PC.

Before I installed a new SSD - Crucial M4 128GB, My computer ran perfectly without any problem. The problem started after I install the SSD.
Originally I had it on Marvel II port but it caused a lot of BSOD ....
So, switch it back to Intel port.
I did switch to ACHI mode in BIOS before fresh install the win 7 in SSD.

The system run better in Intel port compare with Marvell port.
but still, for whatever reason, the blue screen would still pop up and I have no clue what causing it.

I done test with Memtest86+ and came back clean [see attached file]

Also, I notice that my computer runing fine in the night time. but in the morning, when I turn it on, the BSOD will come up. That happened in the past 2 - 3 days. Strange....

Maybe is my driver got problem? or hardware problem?

It would be greatly appreciatedm If anyone could help me and give me some clues...or direction on how to fix this thing

Thank you for helping me in advance. Cheers

A:BSOD in the morning only? Cause by newly installed Crucial M4?

Sorry but you uploaded the application instead of the data Try this method

We do need the DMP file as it contains the only record of the sequence of events leading up to the crash, what drivers were loaded, and what was responsible.

If you are overclocking STOP

You may be able to get the DMP files without crashing by booting into safe mode (F8) with networking.

To enable us to assist you with your computer's BSOD symptoms, upload the contents of your "\Windows\Minidump" folder.

The procedure:





Quote:
* Copy the contents of \Windows\Minidump to another (temporary) location somewhere on your machine.
* Zip up the copy.
* Attach the ZIP archive to your post using the "paperclip" (file attachments) button.
*If the files are too large please upload them to a file sharing service like "Rapidshare" and put a link to them in your reply.



To ensure minidumps are enabled:





Quote:
* Go to Start, in the Search Box type: sysdm.cpl, press Enter.
* Under the Advanced tab, click on the Startup and Recovery Settings... button.
* Ensure that Automatically restart is unchecked.
* Under the Write Debugging Information header select Small memory dump (256 kB) in the dropdown box (the 256kb varies).
* Ensure that the Small Dump Directory is listed as %systemroot%\Minidump.
* OK your way out.
* Reboot if changes have been made.

Read other 9 answers
RELEVANCY SCORE 48.4

Lenovo G 570 laptop running Win 7 Home Premium SP1 normally for about a year.will not start after recent update. A BSOD flashes on for fraction of a second, too fast to read error code. Computer will not start normally or in safe mode.
I don't have a restore point or image. Please don't beat me up for that, I too am amazed that I didn't set it up. It is what it is.
I do, however have the original install disk.
I tried selecting upgrade when booted to the install disk, but it won't let me upgrade unless Win 7 has booted normally.
This looks exactly like the update-caused error from last year(?) that messed up so many computers including 3 of mine.

A:finished automatic update this morning - now BSOD

There have been very few (i.e. none that I know of here) reports of this behaviour with this month's updates - until yours.

Have you tried using Startup repair from the Repair My Computer option in the Advanced Boot Menu?

Have you tried using Last Known Good Configuration from the Advanced Boot Menu?

Read other 9 answers
RELEVANCY SCORE 48.4

Okay guys I've been having this issue for a week now ever since upgrading to windows 8.1.
My system specs are shown in the attached image.

Every morning when I boot my PC I get a blue screen at the windows loading screen. Various error messages have been displayed including "NTFS_FILE_SYSTEM", "DRIVER_IRQL_NOT_LESS_OR_EQUAL", "CUSTOM_ERROR" AND "SYSTEM_THREAD_EXCEPTION_NOT_HANDLED". This happens every morning without fail and most evenings too when I get back from work and boot my PC.

I'm at the end of my tether with this issue and am considering just being done with it and reverting back to Windows 7. After running Driver Verifier I instantly got stuck in a loop of BSODs being caused by "l1c63x64.sys" which I think is to do with the on-board network adapter with my motherboard. I have tried using a PCI Network adapter while disabling the on-board LAN but the issue has still not gone away.

I have attached my dump from DM Log Collector Tool.

A:BSOD on cold boot every morning/evening.

Update both wireless network drivers and Ethernet drivers. Test your RAM: RAM - Test with Memtest86+ - Windows 7 Help Forums
one stick at a time eight passes per stick

Code:
HECIx64.sys Tue Jul 3 00:14:58 2012 (4FF21D62)
Intel Management Engine Interface
http://www.carrona.org/drivers/driver.php?id=HECIx64.sys

t_mouse.sys Mon Dec 3 07:19:30 2012 (50BC4472)
iBall Advanced Mouse driver
http://www.carrona.org/drivers/driver.php?id=t_mouse.sys

RTCore64.sys Mon Mar 11 06:32:06 2013 (513D6C56)
RivaTuner/EVGA Precision/MSI Afterburner (known BSOD issues w/Win7)
http://www.carrona.org/drivers/driver.php?id=RTCore64.sys

Rt630x64.sys Fri May 10 11:59:08 2013 (518CC4EC)
Realtek PCI/PCIe Adapters
http://www.carrona.org/drivers/driver.php?id=Rt630x64.sys

netr28x.sys Thu Jul 11 11:27:41 2013 (51DE7A8D)
Ralink RT2860 series Wireless LAN Card (you may have a different manufacturer)
http://www.carrona.org/drivers/driver.php?id=netr28x.sys

L1C63x64.sys Tue Jul 16 08:56:31 2013 (51E4EE9F)
Qualcomm Atheros AR8151 PCI-E Gigabit Ethernet Controller (NDIS 6.30)
http://www.carrona.org/drivers/driver.php?id=L1C63x64.sys

EtronXHCI.sys Wed Jul 17 08:23:45 2013 (51E63871)
Etron USB 3.0 Extensible Host Controller Driver
http://www.carrona.org/drivers/driver.php?id=EtronXHCI.sys

EtronHub3.sys Wed Jul 17 08:23:48 2013 (51E63874)
Etron USB 3.0 Extensible Hub Driver
http://www.carrona.org/drivers/driver.php?id=EtronHub3.sys

intelppm.sys Thu Aug 22 10:46:35 201... Read more

Read other 28 answers
RELEVANCY SCORE 48.4

Last night I clicked the shutdown button. Windows starting shutting down so I left the room. Got up today to find a BSOD on the screen. Previously I had problems with my PC acting if someone were pressing the power button causing a hard reset. Ran a stress test. Everything seemed fine until the BSOD this morning.
Attached are my dump files from the sf diagnostic tool.

Hopefully this is all the info that's needed.

A:BSOD 0x000000C2 this morning after I shutdown last night.

Hi ThaWade.

The BSOD is caused by Acronis True Image Snapshot Manager driver.

Code:
fffff880`0849dcf8 fffff880`0198b732Unable to load image \SystemRoot\system32\DRIVERS\snapman.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for snapman.sys
*** ERROR: Module load completed but symbols could not be loaded for snapman.sys
snapman+0x22732
And, it is old.

Code:
fffff880`01988000 fffff880`019ce000 snapman (deferred)
Image path: \SystemRoot\system32\DRIVERS\snapman.sys
Image name: snapman.sys
Timestamp: Wed Mar 09 18:52:38 2011 (4D777F1E)
CheckSum: 0004F614
ImageSize: 00046000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
In this situation, you should either install install the latest version of Acronis or uninstall it.

Read other 5 answers
RELEVANCY SCORE 48.4

This morning I went to Dish Anywhere to view Olympics. I was using Chrome Browser with asked to download something to view. (It was the first time using Chrome) Dish anywhere launched, worked for about 3 minutes then got loud static noise and then BSOD.

I tried restore point from yesterday, that did not work, tried repair from Win disk, and memory check, that did not work. Ran Chkdsk with no errors.

I can get into windows on regular basis, but about 40 seconds after desktop loads, BSOD happens again.

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.256.48
Locale ID: 1033
Additional information about the problem:
BCCode: a
BCP1: 0000000000000000
BCP2: 0000000000000002
BCP3: 0000000000000001
BCP4: FFFFF80003C9AC3F
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1
Files that help describe the problem:
C:\Windows\Minidump\021114-18985-01.dmp
C:\Users\Chas\AppData\Local\Temp\WER-85067-0.sysdata.xml
Read our privacy statement online:
Windows 7 Privacy Statement - Microsoft Windows
If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt


The first BSOD happened this morning around 6:30am I have attached the SF file for viewing.

Can someone please help with this?

Thank you

A:BSOD Started this morning while Viewing Dish Anywhere

It looks like your AV is the problem. It looks like you have Norton. Make a system restore point, uninstall Norton, then install Microsoft Security Essentials. If things work the way they should, keep using Essentials. MSE is just as good as any paid AV (In the opinion of many here)

Read other 3 answers
RELEVANCY SCORE 48.4

As title says. The comp doesn't go BSOD immediately when I press sleep, it just goes to sleep and the display goes off as usual. It must come on and BSOD itself a few hours later when I'm asleep.

I havn't had a single BSOD during normal computer use.

Any ideas?!

A:Every night I set computer to sleep...every morning, BSOD

Hello mcplums, please follow the instructions below and post the required information.

Blue Screen of Death (BSOD) Posting Instructions

Read other 9 answers
RELEVANCY SCORE 48.4

I shut down normally last night, there have been no problems. Thsi morning when I logged in after a normal boot I had the "Windows has recovered from an unexpected shutdown" box sitting there on the desktop.
Here is the data it contained. I'm unsure If there is a problem or if this is an anomaly.
Windows has recovered from an unexpected shutdown

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.0.6002.2.2.0.768.3
Locale ID: 1033

Additional information about the problem:
BCCode: 1
BCP1: 0000000077AD6F9A
BCP2: 0000000000000000
BCP3: 000000000000FFFE
BCP4: FFFFFA6004D3FCA0
OS Version: 6_0_6002
Service Pack: 2_0
Product: 768_1

Files that help describe the problem:
C:\Windows\Minidump\Mini012912-01.dmp
C:\Users\User1\AppData\Local\Temp\WER-99637-0.sysdata.xml
C:\Users\User1\AppData\Local\Temp\WER2C8B.tmp.version.txt

Read our privacy statement:
http://go.microsoft.com/fwlink/?linkid=50163&clcid=0x0409
 

A:Solved: BSOD warning after bootup this morning

Read other 16 answers
RELEVANCY SCORE 48

I've had 3 BSOD this morning, looking at BlueScreenView it appeared to be a graphics driver issue so I updated my drivers to the latest available (GeForce 337.88) but I'm still getting BSOD.
Error code is 0x00000116.

I've crashed twice while just browsing Youtube and stuff and once when playing Dark Souls 2.

Updated with another .dmp file.

A:Had 3 BSOD this morning, appears to be a graphics driver issue.

Dusted out the computer and it worked fine for a while but then i Bluescreened again.

Read other 2 answers
RELEVANCY SCORE 48

Hi
I have a strange BSOD Problem.
I turn off my computer at night and every morning it takes two or three restarts to get the computer going from a BSOD Driver IRQL LESS OR NOT EQUAL fault.
Strange thing is if I do a restart once its going it does not do it.
I have had a few random BSODs while its running but they are rare.
Could someone please analyse my logs and come up with suggestions.

Thanks Neil

A:BSOD Driver IRQL LESS OR NOT EQUAL On first boot in morning ZIP Att

Do post the BSOD dumps...

Its not attached along with the zip

Read other 9 answers
RELEVANCY SCORE 47.2

For the past 3 mornings I have come into the office to see a lovely BSOD.
Seems to be fine during the day.
This is a new computer build that I just finished last week.
processor is i7 4770k

Originally I thought it was because I was trying to slightly overclock to 4.0 ghz but I disabled that and it still happens.

and motherboard is
ASRock Fatal1ty Z87 Killer LGA 1150 Intel Z87 HDMI SATA 6Gb/s USB 3.0 ATX Intel Gaming Motherboard

Not sure what else people need but happy to provide any info. Thanks.

A:BSOD every morning when I show up to work. - New i7 4770k Custom Build

Blah it just happened again and I was not even using the computer for anything.

Read other 9 answers
RELEVANCY SCORE 43.2

Im getting BSOD all the time iv reinstalled windows 7 cleared all my hdd changed Ram nothing works..
So here i am looking for skilled help

Is Windows 7 . . .
- x64
- the original installed OS on the system? no
- an OEM or full retail version? Retail
- What is the age of system (hardware) 2.5 years
- What is the age of OS installation : Fresh 1 day

Thx for all the help i can get ..

A:BSOD doing any thing..

Hi ArchTycoon welcome to SF

Please download and install Speccy

Take a snip\screenshot from the summary and upload it here.

Then read very carefully this tutorial and run prime95

Finish with the above steps and post back with any results.

Read other 9 answers