Over 1 million tech questions and answers.

Error--service Control Manager Event Log Provider

Q: Error--service Control Manager Event Log Provider

I have had lots of trouble with my Vista freezing & just generally being a mess--shutting down & starting slow--really operating slow on the net. So lately I have been trying to speed it up & correct problems. I've finally gotten it running much, much faster & I am using Firefox as my browser--which I've optimized so its slick as a whistle--way faster. (I previously posted about the application error w/ Winword.) Here is another error I don't know what to do with. I must confess to what I did at this point--I didn't want Windows Defender on my system, so I deleted it using add/remove programs & I also went in & manually deleted some files to try to get it completely uninstalled. So if you look at this computer's list of installed programs in Windows you won't see it listed. But I am getting these error messages #'s 7000, 7001, 7022 & 7023--Here are 2 of them (see below). Is there anything I need to do with this which will tweek the system & make it operate any faster/perform better? Can I make it stop getting freaked out because it thinks something is wrong? Is changing the registry the only way to stop this? Thanks again.Log Name: SystemSource: Service Control ManagerDate: 7/25/2008 11:24:37 AMEvent ID: 7001Task Category: NoneLevel: ErrorKeywords: ClassicUser: N/AComputer: User-PCDescription:The Remote Access Connection Manager service depends on the Telephony service which failed to start because of the following error: The service cannot be started, either because it is disabled or because it has no enabled devices associated with it.Event Xml:<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">" target="_blank" class="wLink">http://schemas.microsoft.com/win/2004/08/events/event"> <System> <Provider Name="Service Control Manager" Guid="{555908D1-A6D7-4695-8E1E-26931D2012F4}" EventSourceName="Service Control Manager" /> <EventID Qualifiers="49152">7001</EventID> <Version>0</Version> <Level>2</Level> <Task>0</Task> <Opcode>0</Opcode> <Keywords>0x80000000000000</Keywords> <TimeCreated SystemTime="2008-07-25T16:24:37.000Z" /> <EventRecordID>99310</EventRecordID> <Correlation /> <Execution ProcessID="0" ThreadID="0" /> <Channel>System</Channel> <Computer>User-PC</Computer> <Security /> </System> <EventData> <Data Name="param1">Remote Access Connection Manager</Data> <Data Name="param2">Telephony</Data> <Data Name="param3">%%1058</Data> </EventData></Event>Log Name: SystemSource: Service Control ManagerDate: 7/25/2008 7:22:07 AMEvent ID: 7000Task Category: NoneLevel: ErrorKeywords: ClassicUser: N/AComputer: User-PCDescription:The mrtRate service failed to start due to the following error: The system cannot find the file specified.Event Xml:<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"> <System> <Provider Name="Service Control Manager" Guid="{555908D1-A6D7-4695-8E1E-26931D2012F4}" EventSourceName="Service Control Manager" /> <EventID Qualifiers="49152">7000</EventID> <Version>0</Version> <Level>2</Level> <Task>0</Task> <Opcode>0</Opcode> <Keywords>0x80000000000000</Keywords> <TimeCreated SystemTime="2008-07-25T12:22:07.000Z" /> <EventRecordID>99227</EventRecordID> <Correlation /> <Execution ProcessID="0" ThreadID="0" /> <Channel>System</Channel> <Computer>User-PC</Computer> <Security /> </System> <EventData> <Data Name="param1">mrtRate</Data> <Data Name="param2">%%2</Data> </EventData></Event>

RELEVANCY SCORE 200
Preferred Solution: Error--service Control Manager Event Log Provider

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Error--service Control Manager Event Log Provider

If a service tries to start, and is unable to start for any reason, it'll give it several tries before giving up. This will cause a little bit of slowdown on the system - but it shouldn't be enough of a slowdown for you to notice it.Not every error in the Event Viewer is serious enough to warrant an investigation. For example, HP systems will usually spit out an error about the parallel printer port (LPT1) - even though there aren't any hardware parallel ports installed on the system. This is, IMO, because the BIOS contains code referencing this feature even though the hardware doesn't exist.Deleting/uninstalling of Windows components from the Programs and Features applet in Control Panel is safe. Once you venture outside of that area, the chances of hosing your system grow drastically. My first suggestion is that you don't delete things without creating a backup of them (and a description of where they're located). My next suggestion is to do things one step at a time. That way you'll be able to assess the impact of a change before moving on to the next change.The key to researching an Event Viewer error is comparing it to the other entries in the Event log (Information and Warning). Then a search for similar errors with Google, and a careful analysis of exactly what the message says.In your examples, the first error is that the Remote Access Connection Manager service couldn't start because the Telephony service couldn't start. Here's a description of the Telephony service: http://www.blackviper.com/WinVista/Services/Telephony.htmAnd here's one of the Remote Access Connection Manager service: http://www.blackviper.com/WinVista/Service...ion_Manager.htmSo, the first thing to figure out is if you need the Remote Access Connection Manager service (also investigate the Dependencies because they will impact your decision about needing the service). If you do, then you've gotta enable the Telephony service. If you don't, then you can set it to Manual (much safer than disabling it) to see if it works well without the service. If you set the service to Manual and you don't need it - then it won't launch and you won't get the error message in the Event Viewer. If it does launch, despite being set at Manual, then some program is telling you that you need it.As for the second error, the MRT Rate service is commonly associated with the automatic update function in Quicken/QuickBooks. Do you have that installed on your system? If so, try disabling the automatic update to see if that stops the errors.

Read other 5 answers
RELEVANCY SCORE 100.4

Keywords: Classic
SstpSvc fails to start; Starts then stops; 

Solution: Under Device Manager: Network Adapters: Enable Wan Miniport SSTP

Read other answers
RELEVANCY SCORE 99.6

Hi,

I'm getting this error on every restart, event id 7022 Service Control Manager Hung on starting. I've taken a look at it in services and it has "do nothing" if Diagnostic Service Host fails. I've tried to change it to restart but get an error and it won't let me change it. Any ideas? Don

A:Event ID 7022 Error - Service Control Manager Hang

Hi everyone,

I still haven't resolved this issue. I have investigated this error to death. I am wondering if there is another service that is causing this error. I don't know how to get more details on this issue Any help on this would be very appreciated.

Thank you,
Don

Read other 1 answers
RELEVANCY SCORE 99.6

Hi,

I'm getting this error on every restart, event id 7022 Service Control Manager Hung on starting. I've taken a look at it in services and it has "do nothing" if Diagnostic Service Host fails. I've tried to change it to restart but get an error and it won't let me change it. Any ideas? Don

A:Event ID 7022 Error - Service Control Manager Hang

Hi everyone,

I still haven't resolved this issue. I have investigated this error to death. I am wondering if there is another service that is causing this error. I don't know how to get more details on this issue Any help on this would be very appreciated.

Thank you,
Don

Read other 1 answers
RELEVANCY SCORE 88.8

Not exactly sure what the issue is here
But have hundreds of this error.

A:Service Control Manager Event ID 7001

From Microsoft, give this a try

Event ID 7001 Is Logged in the System Event Log

Read other 2 answers
RELEVANCY SCORE 88.8

I was just checking in Event Viewer today, and there are some errors detailed as;

ID 7000 Service Control Manager Event service start failed Parallel Port driver service failed to start .. blah blah .. either because it not been enabled or it has been disabled (or words to that effect)

Truth is, im not getting any effects really, but I would like to know what this is, and how to get around it.

A:Event Id 7000 Service Control Manager

Do you have any hardware, i.e. printer, using the parallel port?

Read other 5 answers
RELEVANCY SCORE 88.8

Hi, I am receiving this error at every boot:
Event Type: Error
Event Source: Service Control Manager
Event Category: None
Event ID: 7000
Date: 10/30/2008
Time: 9:38:08 PM
User: N/A
Computer: PRESARIOXPP
Description:
The PCASp50 NDIS Protocol Driver service failed to start due to the following error:
The system cannot find the file specified.

For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

I searched my hard drive for the file PCASp50.sys, but it is not present. The registry indicates the service is installed but shows INITSTARTFAILED with value 1 under HKEY_LOCAL_MACHINE/SYSTEM/CurrentContolSet/Services/PCASp50/Enum

I don't know what service this is, or if some driver/software was uninstalled that created it. I looked on my notebook that has windows xp home installed about the same time as my desktop, but can't find the file and the service is not listed in the registry as on my desktop.

Any help would sure be appreciated!

Thanks!

A:Service Control Manager event 7000

anyone?

Read other 3 answers
RELEVANCY SCORE 88

Hi guys everytime i turn on my pc and look at my Event Viewer log i see Service Control Manager Error does anyone know how to fix this problem? Here are the details :

System

- Provider
[ Name] Service Control Manager
[ Guid] {555908d1-a6d7-4695-8e1e-26931d2012f4}
[ EventSourceName] Service Control Manager


- EventID 7000
[ Qualifiers] 49152



Version 0


Level 2


Task 0


Opcode 0


Keywords 0x8080000000000000

- TimeCreated
[ SystemTime] 2013-04-18T05:09:19.150702800Z



EventRecordID 89340


Correlation

- Execution
[ ProcessID] 628
[ ThreadID] 840



Channel System


Computer Amir-PC


Security
- EventData

param1 Diagnostic Service Host

param2 %%1069
im using OS Windows 7 Home Premium x64 SP1
CPU Intel(R) Core(TM) i5-2500K CPU @ 3.30GHz
Motherboard ASUSTeK Computer INC. P8Z68-V GEN3
Memory G.SKILL Sniper Series 8GB DDR3 1866 (PC3 14900)
Graphics Card ASUS GTX660 TI-DC2O-2GD5
Sound Card HT | OMEGA Claro Halo
Monitor(s) Displays ASUS VE247H Black 23.6" 2ms
Screen Resolution 1920 x 1080
its just every time i open my event viewer log i see this error on it can someone explain to me how to fix it thanks

A:Service Control Manager Event Viewer System

Hi can you try the sfc /scannow command and see if it finds anything? SFC /SCANNOW Command - System File Checker

Read other 9 answers
RELEVANCY SCORE 86

It started less then a month ago and I can't figure out what is causing the issue. I've looked over Event Viewer, but can't seem to get answers on specifics over the net. I then read about the crash and debug section here and figured I might be able to get a little, or more, understanding about the issue. All help is greatly appreciated!






Quote:
Event Viewer Issues;

12:02:05 The PnkBstrB service entered the stopped state.
EventSourceName="Service Control Manager"
EventID Qualifiers="16384">7036</EventID
Keywords>0x8080000000000000</Keywords
EventRecordID>261885</EventRecordID
Execution ProcessID="476" ThreadID="168"/
Binary>50006E006B00420073007400720042002F0031000000</Binary
12:02:10 The Application Experience service entered the running state.
12:02:15 The DNS Client service entered the running state.

A:Game crashing. Event Viewer says 'Service Control Manager'=ID7036

No DMP's included.

We do need the DMP file as it contains the only record of the sequence of events leading up to the crash, what drivers were loaded, and what was responsible.

If you are overclocking STOP

You may be able to get the DMP files without crashing by booting into safe mode (F8) with networking.

To enable us to assist you with your computer's BSOD symptoms, upload the contents of your "\Windows\Minidump" folder.

The procedure:





Quote:
* Copy the contents of \Windows\Minidump to another (temporary) location somewhere on your machine.
* Zip up the copy.
* Attach the ZIP archive to your post using the "paperclip" (file attachments) button.
*If the files are too large please upload them to a file sharing service like "Rapidshare" and put a link to them in your reply.


To ensure minidumps are enabled:





Quote:
* Go to Start, in the Search Box type: sysdm.cpl, press Enter.
* Under the Advanced tab, click on the Startup and Recovery Settings... button.
* Ensure that Automatically restart is unchecked.
* Under the Write Debugging Information header select Small memory dump (256 kB) in the dropdown box (the 256kb varies).
* Ensure that the Small Dump Directory is listed as %systemroot%\Minidump.
* OK your way out.
* Reboot if changes have been made.

Read other 1 answers
RELEVANCY SCORE 86

Hi guys! hoping for some pointing in the right direction here with an intermittent issue.

I use a Dell XPS17 with W7 Ultimate for work (which entails visiting various clients and login on to their networks via mapped drives (don't know if that is relevant to issue)).

Anyhow, some days on starting up the laptop, after I login to my profile, it hangs with a black screen for times between five and fifteen minutes or until I force a hard shut down (other days it starts up fine albeit slower than I would like!).

The days that this happens the Event viewer Administrative Events will show maybe 5,000 lines of
Event ID 7001 "The Computer Browser service depends on the Server service which failed to start because of the following error: The dependency service or group failed to start"
Log Name: System, Source: Service Control Manager.

Likes its continually attempting this same task until it gets a result or gives up..

Searches I have done regarding this issue return so many results (unrelated to my circumstances) I am struggling to see were to go to try and resolve it.

I appreciate this is a brief description of the issue but as I don't know what it is I don't know what is relevant to tell you..

My IT knowledge is pretty basic.

Thanks in advance for any assistance.

A:Event ID 7001 Service Control Manager causing slow logon

Hello and welcome Mugel mate I don't know if this will help but worth a try
Event ID 7001 ? Service Start Operations

Read other 9 answers
RELEVANCY SCORE 81.6

Hello guys,
 
I have a computer running Windows 7 Ultimate SP1.  2 Quad CPU, 3GB RAM.  Computer is on a domain, however user complains that every so often when she tries to login, she gets the Welcome Screen and it freezes with the circle rotating.  She hard powers the computer to get it working "normal" again.
 
I checked the Event Viewer and found that on the times where she mentioned she had the issues, there were several Event Messages on the System Category.  Each error was reported around every minute.  For this machine the error is the same one:  "A timeout (300000 milliseconds) was reached while waiting for a transaction response from the Winmgmt service."
 
I did some research on that error message, Event ID: 7011, however found many links that did not seem to correspond with my issue.
 
I ran a Minitoolbox and the following is what it found:
 
MiniToolBox by Farbar  Version: 21-07-2014
Ran by Gay (ATTENTION: The logged in user is not administrator) on 21-07-2014 at 11:23:17
Running from "C:\Users\Gay\Downloads"
Microsoft Windows 7 Ultimate  Service Pack 1 (X86)
Boot Mode: Normal
***************************************************************************
========================= Flush DNS: ===================================
Windows IP Configuration
Successfully flushed the DNS Resolver Cache.
========================= IE Proxy Settings: ==============================
Proxy is not enabled.
No Proxy Ser... Read more

A:Multiple Service Control Manager Error Msgs (Winmgmt Service)

Please Publish a Snapshot using Speccy - http://www.bleepingcomputer.com/forums/topic323892.html/page__p__1797792#entry1797792 , taking care to post the link of the snapshot in your next post.
 
Louis

Read other 2 answers
RELEVANCY SCORE 77.6

This is a repeated error message, any ideas. The ptserial service failed to start due to the following error: No serial device was successfully initialized. The serial driver will unload. I'm running XP Pro, with Firefox. It could be a Logitech problem, when it happens the cordless mouse will freeze, have to hit the restart button to start. I have no spyware on this computer.
 

Read other answers
RELEVANCY SCORE 77.6

Hello,
Received a Service Control Manager Error "The DHCP Client service depends on the Ancillary Function Driver for Winsock service which failed to start because of the following error:
A device attached to the system is not functioning."
This caused my W7 Ultimate 64 Bit computer to lock up after the control/alt/delete screen. After I hit Ctrl/Alt/Del the screen does not show any users to log in.
According to the event log this has happened before and I have noticed the same issues before. It will reboot in safe mode.
Can anyone give me some advice on determining which device is not functioning as I can't decipher it and could this be a failing board related problem? I have gotten Kernel Power Errors "the system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly." even though the computer was restarted by a program and did reboot, or from a user shutdown or restart in which it did reboot?
I hope this is the correct area for this question and I appreciate any assistance.
Glenn

A:Service Control Manager Error

It sounds like a hardware error to me. Since Winsock is mentioned I would concentrate on the Ethernet interface. If it's built into the motherboard then I don't know how you'd test it except by swapping the whole thing out. I know when I got defective network cards in the past it was one of the few things that would hard lock the machine. The system would come up, but then when the card heated up, the whole system would freeze. Trip back to the computer store. Insert a good card. All is honkey dorey.

Read other 4 answers
RELEVANCY SCORE 76.8

Hello, everyone. Well, I am in real strife. I am asking for help as a last resort because I just can't solve my problem alone.My problem started a couple of days ago, and I cannot use my computer at all in normal start-up mode.The error that is reported in the event viewer is in the title of this thread. The description accompanying the error message follows:The following boot start or system-start driver(s) failed to load:AmdK8AvgLdx86AvgMfx86FipsIn addition I am getting a blue screen STOP error 0x000000EA when I reboot normally. It reports that the problem file is nv4_disp.I should add that I had this exact same problem a year or two ago. The solution at that time was as simple as changing some setting (or perhaps a single registry value - I can't remember). I found that solution on the Internet somewhere, and I have spent around 12 hours trying to find wherever I found it last time. My point in saying this is that, on that occasion, there was nothing wrong with my video card/display adapter (NVIDIA GeForce 8500 GT) as many of the threads on the Internet regarding this problem suggest.Can anyone please help?

A:Service Control Manager Error 7026

Hello and Welcome to Bleeping Computer,
Have you updated you driver recently? Also can I have your OS. I also need to know if you are using a 64 or 32 bit version.

Thanks

Read other 5 answers
RELEVANCY SCORE 76.8

Hello, everyone. I'm not really sure if I have chosen the right forum for this, but here goes.

Well, I am in real strife. I am asking for help as a last resort because I just can't solve my problem alone.

My problem started a couple of days ago, and I cannot use my computer at all in normal start-up mode.

The error that is reported in the event viewer is in the title of this thread. The description accompanying the error message follows:
The following boot start or system-start driver(s) failed to load:
AmdK8
AvgLdx86
AvgMfx86
Fips​In addition I am getting a blue screen STOP error 0x000000EA when I reboot normally. It reports that the problem file is nv4_disp.

I should add that I had this exact same problem a year or two ago. The solution at that time was as simple as changing some setting (or perhaps a single registry value - I can't remember). I found that solution on the Internet somewhere, and I have spent around 12 hours trying to find wherever I found it last time. My point is that, on that occasion, there was nothing wrong with my video card/display adapter (NVIDIA GeForce 8500 GT) as many of the threads on the Internet regarding this problem suggest.

Can anyone please help?
 

A:Service Control Manager Error 7026

nv4_disp is your NVidia driver. Start by installing the latest version.

The failure of the AVG rootkits to load may well be due to their being blocked by a serious infection.
 

Read other 3 answers
RELEVANCY SCORE 76.8

Ok, so I was dicking around on the comp before I left today, come back to find My comp took a poo on itself

I went into the Event Viewer, and this error was spammed everywhere. I did some checking, and everything points to the BOOT order of my BIOS.

I attempted a restart to boot BIOS, instead it just boot to the start menu. I tried in Safe Mode. Same thing

My BIOS will NOT load(spamming f2 brings up a PC control, and a bios boot menu, clicking on the bios results in the computer starting up)

I have googled, and googled... and no one is having this issue. Seems to be just me HALP!!!!!!!
 

Read other answers
RELEVANCY SCORE 76.8

Hi all , im new here.
I have this error Error 7000 Service Control Manager in my Event viewer.

The NEWDRIVER service failed to start due to the following error:
The system cannot find the file specified.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Service Control Manager" Guid="{555908d1-a6d7-4695-8e1e-26931d2012f4}" EventSourceName="Service Control Manager" />
<EventID Qualifiers="49152">7000</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8080000000000000</Keywords>
<TimeCreated SystemTime="2014-06-28T09:14:25.330831300Z" />
<EventRecordID>144253</EventRecordID>
<Correlation />
<Execution ProcessID="552" ThreadID="556" />
<Channel>System</Channel>
<Security />
</System>
<EventData>
<Data Name="param1">NEWDRIVER</Data>
<Data Name="param2">%%2</Data>
</EventData>
</Event>

I have searched about this error and i discovered that NEWDRIVER service can be found here :RegistryKey : HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\NEWDRIVER
Image Path : C:\windows\system32\WinVDEdrv6.sys

I have found that winvdedrv6.sys belongs to NewSoftwares.net Inc. SDN. BHD (authors of folder lock sof... Read more

A:Error 7000 Service Control Manager

The key point is verifying that winvdedrv6.sys does indeed belong to NewSoftwares.net. Locate the file, right click on it and choose Properties, go to the Details tab and check the copyright name. If it does belong to them and you don't have any of their programs installed, then I would remove the registry key.
 

Read other 1 answers
RELEVANCY SCORE 76.8

I have this one error in my Error Log:

"22 February 2005 Service Control Manager The following boot-start or system-start driver(s) failed to load: i8042prt"

Can anyone shed some light on it please.
 

A:Solved: Service Control Manager Error log

http://www.microsoft.com/resources/...s/2000/server/reskit/en-us/regentry/31480.asp
http://searchwinsystems.techtarget.com/tip/1,289483,sid68_gci1040225,00.html
http://www.ntcompatible.com/thread22746-1.html
 

Read other 3 answers
RELEVANCY SCORE 76

Hi All

Can somebody please help with the following annoying little problem I am encountering?

I can't seem to detect and repair the source of the aforementioned titled 'Error Message'. The message reads (exactly) as follows:

"The Cfg Registry key denied access to SYSTEM account programs so the Service Control Manager took ownership of the Registry key".

It sounds a bit spooky and has got me completely baffled and bemused?

Appreciate any suggestions... THANKS.
 

A:Error, EventID: 7028, Service Control Manager

Well it may be a spooky problem, but the error isn't so much. Permissions are important and in your error its telling you 'hey this registry key did not allow SYSTEM access. SYSTEM is a high level access, and generally has more permissions than administrators. In this case the SCM took ownership of the key.

So the question is, is that ok? Should we allow this? Is there some problem that SYSTEM could not do this as it should?

To understand that we need to know more about the registry key item and error code.

Without knowing what caused this message (where you installing/uninstalling, doing nothing related, browsing the web, etc.) my first result on CFG key is it's a trojan:

http://vil.nai.com/vil/content/v_126220.htm

From the article:

This is a remote access trojan. When run, it drops itself and its config file to the "Program Files" folder such as:
C:\Program Files\Remote\RUNDLLL.exe
C:\Program Files\Remote\setup.ini

It creates the registry key to load itself when the host system is restarted.
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run "sys" = C:\Program Files\Remote\RUNDLLL.exe

It then opens tcp port 4778 and waits for remote commands. It also acts as a keylogger.
Symptoms -

Tcp port 4778 open on host system
Existence of the registry key:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run "sys" = C:\Program Files\Remote\RUNDLLL.exeClick to expand...
If so, then you need to c... Read more

Read other 2 answers
RELEVANCY SCORE 76

This error is from my Friends computer and this is the report from Event Viewer. I really think this is causing the problem that makes his computer freeze randomly

Log Name: System
Source: Service Control Manager
Date: 6/20/2012 1:50:25 AM
Event ID: 7000
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: BigRed55-HP
Description:
The Audio Service service failed to start due to the following error:
The system cannot find the file specified.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Service Control Manager" Guid="{555908d1-a6d7-4695-8e1e-26931d2012f4}" EventSourceName="Service Control Manager" />
<EventID Qualifiers="49152">7000</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8080000000000000</Keywords>
<TimeCreated SystemTime="2012-06-20T05:50:25.239279800Z" />
<EventRecordID>20034</EventRecordID>
<Correlation />
<Execution ProcessID="828" ThreadID="832" />
<Channel>System</Channel>
<Computer>BigRed55-HP</Computer>
<Security />
</System>
<EventData>
<Data Name="param1">Audio Service</Data>
<Data Name="param2">%%2</Data>
</EventData>
</Event>
 

A:Service Control Manager Error Causing Crash

The audio service failing would not cause a freeze. Heat and bad memory are more likely. I know because sometimes when I can't remember something, I'll freeze for a moment, too.
 

Read other 2 answers
RELEVANCY SCORE 75.2

Hi there i have 2 problems and i need a solution to them

i went to the event viewer and checked what's the problem details.

1) The Application Host Helper Service service terminated unexpectedly. It has done this 1 time(s). The following corrective action will be taken in 0 milliseconds: Restart the service.

and every time i refresh the event viewer this error increases so, ex if i checked it at 12:00 and i refresh the page, the error would show again but the time will increase so the error would be at 12:01 and so on. the source is (Service Control Manager) and Event ID:7031.

2) Faulting application name: svchost.exe_AppHostSvc, version: 6.2.9200.16420, time stamp: 0x505a9a4e
Faulting module name: ntdll.dll, version: 6.2.9200.16579, time stamp: 0x51637f77
Exception code: 0xc0000005
Fault offset: 0x0000000000021723
Faulting process ID: 0x1b10
Faulting application start time: 0x01cf7b7c1f78649f
Faulting application path: C:\WINDOWS\system32\svchost.exe
Faulting module path: C:\WINDOWS\SYSTEM32\ntdll.dll
Report ID: 5d24b513-e76f-11e3-be9b-0c8bfd0a9bef
Faulting package full name:
Faulting package-relative application ID:
and the same issue occurs here where it also refreshes the time of error. the source of error isApplication Error), and Event ID:1000

i was very specific and i hope i can find a solution thank you
 

Read other answers
RELEVANCY SCORE 75.2

Hello!
Not sure this is the correct forum, new here.

I constantly (roughly every 10ms) receive an error in Event Viewer

Screenshot: http://i.imgur.com/rF8Voi1.png
"The WinPcap Packet Driver (NPF) service failed to start due to the following error: The system cannot find the file specified."

There is no such service. How can I find out what process is trying to start the service?

Thank you!

A:Error from Service Control Manager - system cannot find the file

Welcome to Seven Forums Nahoj. This is part of the WinPCap program usually used by network filtering/sniffer type programs. There should be a npf.sys in C:\windows\System32\drivers Do you have any network monitoring software such as Wireshark? A Guy

Read other 5 answers
RELEVANCY SCORE 72.8

My Buddy's computer keeps freezing up. Each time it throws out this error: Service control manager ? the following boot start? szkg. EC driver not working, Embedded control ec hardware didn?t respond in the time out period. Whats the deal and what should be done to fix the problem?

A:Error Message - Service Control Manager – The Following Boot Start… Szkg. Ec Driver Not Working

Worth reading, IMO: http://www.freedomlist.com/forum/viewtopic.php?p=175505Louis

Read other 3 answers
RELEVANCY SCORE 68

Hello, I tried turnong it on in services and get an error code 1079. Can anyone help me?
 

A:The HomeGroup Provider service depends on the Function Discovery Provider Host

Hello kosikfl and Welcome -From Windows 7 forum -I was going to write the directions, but if you scroll down a bit, there is a pictured detail of how to fix this.The HomeGroup Provider service depends on the Function Discovery Provider Host I hope that this is your version of the problem. Thank You -EDITED to correct link -

Read other 1 answers
RELEVANCY SCORE 67.6

sorry to bombard you all with al these different errors at once but I hope that again you will be able to help me out.

in the eventvwr i am also getting this:





Event Type: Error
Event Source: Service Control Manager
Event Category: None
Event ID: 7023
Date: 12/31/2006
Time: 8:14:47 PM
User: N/A
Computer: STEVE
Description:
The Application Management service terminated with the following error:
The specified module could not be found.

For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.Click to expand...

the support link reads:




Details
Product: Windows Operating System
Event ID: 7023
Source: Service Control Manager
Version: 5.0
Component: System Event Log
Symbolic Name: EVENT_SERVICE_EXIT_FAILED
Message: The %1 service terminated with the following error:
%2

Explanation
The specified service stopped unexpectedly with the error indicated in the message. The service closed safely.


User Action
To troubleshoot the error:

Review the error information displayed in the message.
To display the WIN32_EXIT_CODE error that SCM encountered, at the command prompt, type
sc query service name
The information displayed can help you troubleshoot possible causes for the error.



Version: 5.2
Symbolic Name: EVENT_SERVICE_EXIT_FAILED
Message: The %1 service terminated with the following error:
%2

Explanation
The specified service sto... Read more

A:a "Service control manager error"

"This issue may occur if the server is infected with the Code Red worm or a variant."

You might be infected with this virus...

"Some of the services controlled by Service Control Manager (SCM) depend on other services running successfully before they can operate. In this case, a required service was not running, which prevented the service that depended on it from starting."
 

Read other 1 answers
RELEVANCY SCORE 66.4

I have a few customers with the error.....The Windows Cryptographic Service Provider reported an error:  The security token does not have storage space available for an additional container.  Error Code: 2148073507
I have this issue pop up with Adobe, IBM Viewer, or even emails...I am an admin but I am not sure why this works this way with her.  She is able to work around by going to another computer but I really need to get her and two other computers fully up
and running.  All the programs are updated. 

Read other answers
RELEVANCY SCORE 65.6

um i have windows xp pro now and i was setting up another user account but when i get on the user account it has a continuous popup saying "failed to get service control manager"
 

A:Service Control Manager?

muchichi said:

um i have windows xp pro now and i was setting up another user account but when i get on the user account it has a continuous popup saying "failed to get service control manager"Click to expand...
Did you make this an admin account?

It almost sounds to me as if you installed a printer or similar device which relies on a service entry and installed it to a single user instead of to all users.

Does your other account still work?
 

Read other 2 answers
RELEVANCY SCORE 65.6

I'm getting this warning first and then the error and then my computer reboots:

Warning: The driver disabled the write cache on device \Device\Harddisk1\DR3
Error: The DeviceScanner service failed to start due to the following error:
The system cannot find the file specified.

I'm running Windows XP with 2gb memory and I have just installed a new video card Radeon X 1300.

Can anyone please tell me what this is and what I need to do to fix it.
If you need more information about my computer let me know and I will post anything that I can find on it.

I have been dealing with this for a couple of days now and I'm at wits end. I have no idea what its telling me or what to do at this point.

Help

A:Service Control Manager

Am I correct that you did not have a problem before you installed the new video card?
Where did you get the driver for the video card and how did you install it?

If your computer is spontaneously rebooting and therefore not allowing you to be abloe to see exactly what is on the bsod (error message) please do the following:

When a critical error occurrs in Windows XP, the system will reboot automatically by default. After the reboot, Windows will then usually show a dialogue with the explanation that the system has recovered from a critical error and will offer to submit this error to Microsoft.
Most of the time these spontaneous reboots are rather unique and are not an immediate cause for alert. However, if the situation is recurring, there is probably something wrong in the system configuration. To get a good idea of what is wrong, it is best to disable the option to automatically restart the system after a failure, but to let it show the error message instead.

To do so, please perform the following steps:
1. Right-click My Computer.
2. Select Properties.
3. In the System Properties, select the tab Advanced.
4 In the box called Startup and Recovery, click Settings.
5 A new window will open:

6. Uncheck the box "Automatically restart" in the group System Failure
7. Confirm the changes in both Windows by clicking OK.
Whenever a critical system failure occurs now, you will see a blue screen with a cryptic description of the error. However, the content of this m... Read more

Read other 3 answers
RELEVANCY SCORE 65.2

Hey all,
I am having an issue with a user connected to our local domain. Whenever they try to log in, it keeps displaying "Windows could not connect to the System Event Notification Service service." I have tried multiple ways of addressing it and have
had no luck with a fix for this. I have tried:

Using 'netsh winsock reset'Uninstall and reinstall network adapter driversClean booting and trying to isolate the issue (did not find anything)
Deleting the font cache Tinkering with the service settings Disabling anti-virus and restarting
System Restore
None of these are fixing the issue for my particular system. It always comes back. The hardest part about troubleshooting this issue is how sporadic it is. It happens every other time the user logs in.

The only other fix I have not tried the hotfix they released for this yet. I don't want to install this until I have exhausted all of my options as this could create more problems.
We have 50+ other computers running Windows 7 on this domain with absolutely 0 issues. Any help with this would be greatly appreciated!

Read other answers
RELEVANCY SCORE 64.8

I recently reinstalled Win-7 in my Dell XPS 630i to find that now I am getting service control manager errors and upon looking for service control manager under my services tab I fail to see it anywhere. I have run a read write diagnostic on both hard drives and they both passed so at this point I'm not sure what to do. Any thoughts?

A:Service Control Manager missing

The service control manager is the services.exe process. This process is not a service and In Windows 7 doesn't even host any services. The service control manager is not a service and will not appear in the services tab.

What error messages are you receiving? The exact error message would be preferred.

Read other 2 answers
RELEVANCY SCORE 64.8

i need to know what service control manager does because it keeps giving an error in the event viewer and i think that is why my computer freezes rock solid and have to push the restart button. I am running windows xp pro .
 

A:does anybody know the file name service control manager

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\servicename. The Service Control Manager initializes services that the Start entry designates as Auto-load.
 

Read other 3 answers
RELEVANCY SCORE 64

Recently I had set for guest account by removing the Administrator rights. After that Every 5 minutes there is an error throwing on the screen is as follows :
ANIOApi : Fail to open service control manager.

Request you to kindly advise me how to solve this problem
 

A:Fail to Open Service Control Manager

nimishakavi73, welcome to TSG,
Read this and let us know if it helps.
http://forums.mcafeehelp.com/showthread.php?t=131190
 

Read other 1 answers
RELEVANCY SCORE 64

I have a Toshiba Desktop on our 3-computer LAN that I bought used 2 or 3 years ago that has 2000 Server OS. No major problems until last Friday when my wife was online cleaning the webmail on her insightbb.com email account and her computer locked up. I did not know she had some earlier incidents of locking up in either Outlook or the accounting software on this PC. Previously she had a Win98 OS and was used to rebooting if there was a lockup. so this is what she did 2 or 3 times before letting me know there was a problem.

I had been getting error message: Service Control Manger At least one service or driver failed during system startup. Use event manager to examine the event log details. I found the error was 7000, looked on the Microsoft tech support under Q316500 and used the Rms.inf file to install the Removable Storage Manger in the WINNT\system32 folder.

However the machine will NOT startup normally. After restarting from safe mode it reaches LOG ON TO WINDOWS where you enter user and password.
Service Control Manager
At least one service or driver failed during system start up. Use event manager to examine the event log for details. As described above, I thought I had corrected the problem. But obviously have not. Incidently, I am WAY above my head in all this. I ma not an IT guy! Just someone trying to get his wife's home office computer working.

Thank you.
 

Read other answers
RELEVANCY SCORE 64

Hi everyone,

This is my very first time on this board and very glad to have found it. Lots of useful information on this board :_).

I've noticed that I've got a lot of error messages in the "event viewer" for the same problem. And, I went on the web and did some search on the matter. I find that the problem seems to point towards realone player; however, there's no solution to it.

Has anyone ever got th same problem as I do now and how did you go about to fix the problem?

Please look below for the error message.

Event Type: Error
Event Source: service Control Manager
Event Category: None
Event ID: 7000
Date: 4/22/2002
Time: 1:14:09 AM
User: N/A
Computer: DELL2002
Description:
The ASCTRM service failed to start due to the following error:
The service cannot be started, either because it is disabled or because it has no enabled devices associated with it.

For more information, see Help and Support Center at http:// go.microsoft.com/fwlink/events.asp.

Any help would be appreciated and thanks all for your time.

Best, antee
 

A:Service Control Manager & REALONE question, please?

Hiya and welcome

Which version of Windows are you running?

ASCTRM is a real player driver, try removing and re-installing realplayer. That is what the new RealOne used to be called.

Regards

eddie
 

Read other 1 answers
RELEVANCY SCORE 64

Hi,
I have a problem of taskbar poping randomy in the middle of a full screen video, and automatically going back to desktop while playing full screen games.

Reading this post I used EVENTVWR. Here is the result :
There was nothing under 'Application Hang' that matches the time I had the problem.

Service control manager looks guiltier. There is more events under Error, and a lot of timestamps matching the problem under 'windows logs > System'.

How can I fix this ?
Thanks for any help =)
EDIT : everytime this happen I go check the 'windows logs > System' and there is a new event. Either it really is the problem or it is created by me checking it

A:Service control manager is making taskbar to pop

Check this one too event id 7036 flood

Yours don't seem to flood that much but never know.

Which service/s start-stop, does it show in the events?

Read other 8 answers
RELEVANCY SCORE 64

Every time I open CREDENTIAL MANAGER I get: Error Code: 0x80070425 "The service cannot accept control messages at this time" this happens every time. Also, what is the point of CREDENTIAL MANAGER? I never remembers one password!

Read other answers
RELEVANCY SCORE 63.6

Good day all, new here. Problem is my computer RANDOMLY freezes after login, also sometimes when logging in after waking tower up from standy. I can put it into standby numerous times, log back in with no problems at all. Any ideas what is randomly happening. XP Pro sp3 & latest updates....THANX
msi p6n sli
msi 7950gt vc
kingston ddr 800
intel 3.16 duo 2 core
500w ps ??
bios #'s to follow..thanx Dai

A:Random Freezing w/Service Control Manager errors

what are you running
video card
cpu
m/board
ram
power supply
brand
wattage

check the listings in the bios for voltages and tempretures and post them

run
chkdsk /r

Read other 5 answers
RELEVANCY SCORE 63.6

The event viewer is repeatedly showing these errors and performce does seem sometimes slow (like waiting for something to time out). Anyone know what might cause these errors (the MS site suggest system resources might be low, but there's not much running on the PC, and plenty of memory).
 

Read other answers
RELEVANCY SCORE 63.6

I just keep getting these, is this because Window auto updates are turned off.

Could this be shutting Windows down while in use?
Event Type: Error
Event Source: Service Control Manager
Event Category: None
Event ID: 7001
Date: 4/8/2008
Time: 8:52:06 PM
User: N/A
Computer: N/A
Description:
The Remote Access Connection Manager service depends on the Telephony service which failed to start because of the following error:
The service cannot be started, either because it is disabled or because it has no enabled devices associated with it.

For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

added - made request for move to networking forum
 

A:system logs - service control manager errors

I might recommend that you try having this moved to the networking forum and see if you get bites there. Click on the little exclamation point at the top of the post and then ask them to move the post for you.
 

Read other 3 answers
RELEVANCY SCORE 63.6

I need help please in identifying exactly what software is involved. I do not receive any error message, only receive the critical stop audio, and I do not observe any readily discernible software malfunction. My potential suspect is voidtools.com everything.exe.
Details\Properties are:
Log name: System
Source: Service Control Manager
Event ID: 7036

+++++++++++++++++++++++ Properties ++++++++++++++++++++++++++++++++++++++++
Details:
- System

- Provider

[ Name] Service Control Manager
[ Guid] {555908d1-a6d7-4695-8e1e-26931d2012f4}
[ EventSourceName] Service Control Manager

- EventID 7036

[ Qualifiers] 16384

Version 0
Level 4
Task 0
Opcode 0
Keywords 0x8080000000000000

- TimeCreated

[ SystemTime] 2014-03-12T01:29:43.059551700Z

EventRecordID 419237

Correlation

- Execution

[ ProcessID] 996
[ ThreadID] 7648

Channel System

Computer Larry-A54C

Security

- EventData

param1 Application Experience
param2 stopped
410065004C006F006F006B00750070005300760063002F0031000000

+++++++++++++++++++++++++++ XML View +++++++++++++++++++++++++++++++++++++++++++

- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Service Control Manager" Guid="{555908d1-a6d7-4695-8e1e-26931d2012f4}" EventSourceName="Service Control Manager" />
<EventID Qualifiers="16384">... Read more

A:Critical Stop - 7036 - Service Control Manager

Sorry, forgot "Windows 7 Ultimate, 64-bit" if that info is also required.

Read other 1 answers
RELEVANCY SCORE 63.6

Several months ago i got a fake rogue anti virus.I did a clean up with malware bytes , anti virus , register cleaner etc..all the scanners always show clean. And i posted here before to get the other stuff out but the bsod never left.For almost 6 months now. I popped up event viewer that reveals my crash , here ....its always the same , remote access then service control manager.-------------Windows debugger reveals its one of the nt kernal related programs. usually one that reads "nt krnl" or starts with "NT"help appreciated. And thnx in advance.

A:bsod/remote access/service control manager.

Apparently, when you scanned for viruses, it removed iprtmgr.dllWhich is a legitimate service

Read other 3 answers
RELEVANCY SCORE 63.2

I am using a WD Proxkey DSC and while signing I am getting the following error"
"The Windows Cryptographic Service provider reported an error: The parameter is incorrect. Error Code: 2148073511"

Read other answers
RELEVANCY SCORE 62.8

I'm running Win 7 64 bit in a Windows 2003 R2 domain.

In the last 2 weeks I've gotten several blue screens and am not sure how to correct the problems.
I've run sfc /scannow and no problems were found.

I'm also seeing Service Control Manager errors in the Events Viewer and possible solutions from other posts on the Internet have not worked.

Folder redirection of the My Documents folder is setup in Group Policy yet there are errors that show folders like My Videos can not be created located on the file storage server and my account has full permissions.

Lastly, I am experiencing errors with Outlook 2010.

I've run the MiniToolBox utility and have attached the results.txt file so you can see these errors.

Any help is most appreciated.

timcin
 

A:Win 7 errors -Service Control Manager-folder redirection-conflicts

Are you using 64-bit or 32-bit Outlook? Microsoft confesses to a number of problems with 64-bit Office applications.
 

Read other 2 answers
RELEVANCY SCORE 62.8

We have a requirement to get the windows services from one of our remote server. We already have a group with admin rights on that machine and users added to it. But while fetching the services from that details we get below error.
We are using C#.net to fetch the services.
Error:
InvalidOperationException Was caught
Cannot open Service Control Manager on computer :"". This operation might require other privileges.

Read other answers
RELEVANCY SCORE 62.8

After reading the steps to go through before posting I wanted to make sure I was not wasting anyone's time.

In normal mode my computer will run from 2 mins to 3 hours and then lock up, needing a hard reset.
I have run various malware programs, and removed Google Chrome as it seemed to be happening more when I was using that browser.
Currently able to get the system to run consistently only in SAFE mode.
Does this sound like a situation you might be able to help with?

This one in the event viewer under DistributedCom
"
DCOM got error "1084" attempting to start the service WSearch with arguments "" in order to run the server:
{9E175B6D-F52A-11D8-B9A5-505054503030}"

This one for the Service Control Manager
"
The Computer Browser service depends on the Server service which failed to start because of the following error:
The dependency service or group failed to start."
 

A:Random Reboots; Service Control Manager and Dcom errors

Welcome aboard
Please, complete all steps listed here: http://www.techspot.com/vb/topic58138.html
Make sure, you PASTE all logs. If some log exceeds 50,000 characters post limit, split it between couple of replies.
Attached logs won't be reviewed.

Please, observe following rules:

Read all of my instructions very carefully. Your mistakes during cleaning process may have very serious consequences, like unbootable computer.
If you're stuck, or you're not sure about certain step, always ask before doing anything else.
Please refrain from running any tools, fixes or applying any changes to your computer other than those I suggest.
Never run more than one scan at a time.
Keep updating me regarding your computer behavior, good, or bad.
The cleaning process, once started, has to be completed. Even if your computer appears to act better, it may still be infected. Once the computer is totally clean, I'll certainly let you know.
If you leave the topic without explanation in the middle of a cleaning process, you may not be eligible to receive any more help in malware removal forum.
I close my topics if you have not replied in 5 days. If you need more time, simply let me know. If I closed your topic and you need it to be reopened, simply PM me.

 

Read other 31 answers
RELEVANCY SCORE 62

I am having a problem with my fathers computer. I am on vacation and have been trying to figure it out for 2 days... Explorer.exe crashes and restarts. I have done scans and registry repairs with no luck. He had xp home and I upgraded to xp pro thinking that might fix it but no it didnt. Please help!Below are the DDS.txt and hijack this reports.DDS (Ver_09-07-30.01) - NTFSx86 Run by Ron at 17:19:58.98 on Fri 08/07/2009Internet Explorer: 8.0.6001.18702 BrowserJavaVersion: 1.6.0_13Microsoft Windows XP Professional 5.1.2600.3.1252.1.1033.18.2046.667 [GMT -4:00]AV: Trend Micro Internet Security Pro *On-access scanning enabled* (Updated) {7D2296BC-32CC-4519-917E-52E652474AF5}FW: Trend Micro Personal Firewall *enabled* {3E790E9E-6A5D-4303-A7F9-185EC20F3EB6}============== Running Processes ===============C:\WINDOWS\system32\svchost -k DcomLaunchsvchost.exeC:\WINDOWS\System32\svchost.exe -k netsvcssvchost.exesvchost.exeC:\Program Files\Lavasoft\Ad-Aware\AAWService.exeC:\WINDOWS\system32\spoolsv.exeC:\WINDOWS\system32\svchost.exe -k hpdevmgmtC:\Program Files\Java\jre6\bin\jqs.exeC:\Program Files\LogMeIn\x86\RaMaint.exeC:\Program Files\LogMeIn\x86\LogMeIn.exeC:\Program Files\LogMeIn\x86\LMIGuardian.exeC:\WINDOWS\System32\svchost.exe -k HPZ12C:\WINDOWS\System32\svchost.exe -k HPZ12C:&#... Read more

A:Explorer.exe errors, Service Control Manager, DCOM, DHCP, sysavp.dll

Hello and welcome to Bleeping ComputerWe apologize for the delay in responding to your request for help. Here at Bleeping Computer we get overwhelmed at times, and we are trying our best to keep up. Please note that your topic was not intentionally overlooked. Our mission is to help everyone in need, but sometimes it takes just a little longer to get to every request for help. No one is ignored here.If you have since resolved the original problem you were having, we would appreciate you letting us know. If not please perform the following steps below so we can have a look at the current condition of your machine. If you have not done so, include a clear description of the problems you're having, along with any steps you may have performed so far.Upon completing the steps below another staff member will review and take the steps necessary with you to get your machine back in working order clean and free of malware.If you have already posted a DDS log, please do so again, as your situation may have changed.Use the 'Add Reply' and add the new log to this thread.Thanks and again sorry for the delay.We need to see some information about what is happening in your machine. Please perform the following scan:Download DDS by sUBs from one of the following links. Save it to your desktop.DDS.scrDDS.pifDouble click on the DDS icon, allow it to run.A small box will open, with an explaination about the tool. No input is needed, the scan is running.Notepad will open with the results.Foll... Read more

Read other 2 answers