Over 1 million tech questions and answers.

v110-15ISK cannot detect external monitor

Q: v110-15ISK cannot detect external monitor

I'm connecting the laptop HDMI port to the monitor DP port using a HDMI<--> DP cable. I've tried the following, but nothing seems to help1. installed latest drivers2. installed latest firmware3. tested connecting to another monitor using HDMI to HDMI cable, and it works4. Tested the DP monitor using other laptops, and it works fine. 5. Used F10 to extend screen6. Used a new HDMI <--> DP cable and doesn't work Any thoughts what i can do differently?

Read other answers
RELEVANCY SCORE 200
Preferred Solution: v110-15ISK cannot detect external monitor

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

RELEVANCY SCORE 68

Hello,Is it possible to buy or to be paid back for PC Lenovo ? Regards Simon

Read other answers
RELEVANCY SCORE 67.2

Does the lenovo v110-15isk have a m.2 ssd slot?Specs:i3 6006ur5 m430 2gb gddr34gb ram ddr4 2133mhz1tb hdd15.6 inch display 1366x768 resolution

Read other answers
RELEVANCY SCORE 66.8

I tried to plug in a BENQ monitor with native resolution 2560x1440, but I can choose only 1920x1080. I tried VGA port and HDMI port, no matter. The specification of Intel HD 520 says, I can set 4K.

Read other answers
RELEVANCY SCORE 66.8

this IdeaPad 510-15isk of mine the built-in screen is defective so i attached a VGA monitor to the VGA port. i learned somewhere that when a laptop senses, on bootup, that there is an external monitor connected it should send its display to the external device. my laptop doesn't do that and instead it uses the built-in display which i cannot see because it's defective. i also try to get into the CMOS settings using that Novo button but it since it shows the display using the built-in LCD screen i am unable to check nor configure the CMOS to direct all output to external display (which i'm assuming is controlled by the CMOS). since finding how to goto the CMOS settings on this laptop (that Novo button is too small is not well labelled) i thought there might be some hidden feature that would allow me to force the display to go to the external device. btw, the F10 hotkey that is supposed to toggle the display output doesn't do anything. appreciate any help.

Read other answers
RELEVANCY SCORE 66.4

Hi folks, I am asking you information to improve my ram. I read on the forum, that my notebook has 2 socket: V110-15ISK: 16GB max / 2133MHz DDR4, dual-channel capable,4GB memory soldered to systemboard, one DDR4 SO-DIMM socketSo, to not opet before my notebook, Do I have available another socker for upgrading the ram?Regards,Emanuele

A:Ram upgrade for v110 15isk 80lt000nix

Hi gabriel90ita,
 
Welcome to the Community Forums.
 
As per product specifications:
V110-15ISK: 16GB max / 2133MHz DDR4, dual-channel capable,
4GB memory soldered to systemboard, one DDR4 SO-DIMM socket
 
There would only be one available socket for upgrade (up to 16GB max) similar to crucial's scanner here.
The other 4GB is soldered part of the systemboard as shown here in page 49 hardware manual.
 
Hope this helps answer your query.
 
Regards

Read other 2 answers
RELEVANCY SCORE 66.4

Hello everyone,I'm in desperate need for some help for this issue with my almost new Ideapad (model as in object). After the automatic Windows 10 1709 Fall Creators Update the laptop started to have problems in recognizing my Panasonic Hd Ready TV via HDMI (wich worked perfectly just before that). No error messages of any sort, it's just like the cable isn't plugged in (Win+P or other combos not working). I thought it could be related with video driver problems, so I ran the Lenovo System Update, which actually solved the problem, but just for a few days. Then it suddenly stopped working again (no other updates or software installation meanwhile). As the drivers as up to date, I obviously can't do any further upgrades. I tried the static discharge methot as well (the battery is built in, so I just kept the power button pressed for 30 seconds with the unit turning on and off repeatedly), but it didn't work for me (maybe I lost something in the process?).I would really be glad for any idea given, as I bought the laptop something like three months ago and, even if i format it (wich won't be a big issue), the Windows update will be reinstalled so the problem will probably show up again. Thanks in advance,Riccardo

Read other answers
RELEVANCY SCORE 66.4

Hello, i just wanna know if it is possible to upgrade the Lenovo v110-15isk cpu and gpu. 

A:Lenovo V110-15isk CPU and GPU upgrade

In all modern laptops the CPU and GPU are soldered to the motherboard. It's called BGA socket. And to upgrade them you have to replace the whole motherboard with new CPU and GPU soldered to it.

Read other 1 answers
RELEVANCY SCORE 66.4

As the title says V110-15ISK keyboard/trackpad not working - these are brand new out of the box (i've had 3 out or 10 so far do this) so with no OS or bios modifications, any ideas I've tried holding power button for 15seconds as in this link for an unrelated lenovo device (figured it was worth a shot)https://forums.lenovo.com/t5/Lenovo-IdeaPad-100-305-500-Edge/flex-15-keyboard-and-touchpad-suddenly-... In fact one of the 3 that have decided to do this one has decided to do it after being able to use keyboard / trackpad to change bios setting then pxe boot the install windows 7 64bit in install drivers edit: oh this 'feature' also appears to kill LAN capabilities although external USB keyboard works... (O_e)edit2: also takes out wifiedit3: set bios back to default with no success bios version on this particular laptop I'm working onBIOS: 1KCN29WWEC: 1KEC01WW any ideas any one? (re-posted since original got deleted)-ash

Read other answers
RELEVANCY SCORE 66

I bought a Lenovo V110 15ISK 80TL Notebook in June 2018 and for the last 5 days, it shows me only hibernating in the middle of the screen and nothing else. No start button or anything is displayed on the screen. I can force switch off the notebook by pressing the power button but when I turn on I get the same screen "Hibernating". Kindly help me in bringing my notebook to its normal working mode.  Thanks in advance!Fred

Read other answers
RELEVANCY SCORE 66

I have a Lenovo G510 i7, and now I have bought a Lenovo V110-15isk i3 for my daughter. The notebbok has no DVD/CD unit, so I was planning to make a Bootable USB with Windows 8.1. I used the free program Rufus and got it. But then when I change the BIOS Boot section to state boot from USB and UEFI, the system si not able to start the instaltion. Any ideas.Thank you.Bets RegardsJose

Read other answers
RELEVANCY SCORE 66

Hi.First time I tried to connect my new LG TV to my V110-15ISK, everything went fine. However, after that it no longer manages to connect. Is anybody here able to help me, please? Halstein.

Read other answers
RELEVANCY SCORE 66

Hello Everyone, I was at my laptop like always when suddenly it turned off. NOTE: the laptop was charging when it turned off. after that no sings of life, no charging led indicator, no nothing, it is now a 500$ anti stress power button machine, tried evey single method i can find, i even opened the cover and removed the battery, pressed the button, removed ram, removed cmos battery for 30 seconds. Any other suggestions? maybe this could help: THe laptop was connected at a extension cord when this happened and there was only a monitor and my laptop.

Read other answers
RELEVANCY SCORE 66

I have (or had) a new, working lenovo laptop. Everyting was normal but after downloading updates from its official  red lenovo app that was loaded in the computer, it said it needed to restart, black cmd appeared, it counted down from 5 to 0 and then nothing but a working fan, orange led light that shows the computer is charging and caps lock light. I remember before the update i closed num lock's light but now i can't open it. So I can say keyboard also doesn't work. I read some solutions by holding the power button for some time. Non of them worked, it just powers on and powers off. There is no light in the screen. I am confused and sad. I have an assingment 2 weeks later and have a brick in my hands that can cool itself. I mean how can a company wreck its own computer by updates? Please tell me it can be repaired and warranty covers it.

Read other answers
RELEVANCY SCORE 66

Salve a tutti.Ho un lenovo v110-15isk che al primo avvio mi si ferma sempre sulla schermata "lenovo" senza dare segni di vita, successivamente spegnendolo forzatamente e riaccendendolo nuovamente parte senza nessun errore, ho giÓ eseguito un aggiornamento della bios all'ultima versione ma nulla Ŕ cambiato, potete darmi qualche istruzione su come poter risolvere questo problema?

Read other answers
RELEVANCY SCORE 66

Hi,I want to upgrade my laptop with an ssd and I would need a caddy for the hdd(as it seems the boot drive must be in the internal sata port) and i got a compatible ssd(that is easy) and the problem is picking a caddy,as if i pick by myself and not from the service i escape with atleast 2x moneySo what is the size for my laptop?

Read other answers
RELEVANCY SCORE 66

Hi,we have several v110 devices that have the same issue, when we close the device and after a while we open it again the device not comming up again, it keeps turning on the Lenovo screen. When i push the start button en hold it will stop but when i start the devices again the problem remains.I get in the device when i use the reset button on the right side with a small pin, then choosing recovery, and exit out of the recovery. Then it startup to windows. But if i close the device end reopen the issue is exactly as before. Any idea why this V110 devices facing this issue? Best regards,Benny

Read other answers
RELEVANCY SCORE 66

Hello.  Got this laptop this past Christmas, unfortunately has never worked very well.  Since I bought it, it's had this problem where every time I close the laptop and reopen it, the task bar disappears and the trackpad is unuseable.  I have to manually restart it to get it to work again.  I disabled sleep mode and still this problem would occur.  Then suddenly the trackpad stopped working altogether.  I have to plug in a USB mouse to use this laptop now.  I updated all drivers (including trackpad) and still I cannot use the trackpad.  Windows 10 is also fully updated.  I did not change anything in the control panel so am not sure why it suddenly stopped working.  I am attaching a picture I took showing the problem.  This is after opening up the laptop, you can see the taskbar has disappeared and screen is incorrect resolution.Honestly, this laptop is very disappointing and I'm frustrated that I got it.  I have a newborn at home so spending time on this is really annoying/difficult.  I hope very much that there is an easy fix here.  Please help.  ThanksKC


























IMG_0848.JPG ?1612 KB

Read other answers
RELEVANCY SCORE 66

I'm having to replace the keyboard on a V110-15ISK laptop . However the keyboard and its aluminium cover plate have no screws that can be removed, but seem to be 'welded' to the front cover of the laptop,  using pre-moulded plastic pillars. Has anyone had to replace one of these keyboards or has any suggestions ?? thanks 

Read other answers
RELEVANCY SCORE 66

I have a Lenovo G510 i7, and now I have bought a Lenovo V110-15isk i3 for my daughter. The notebbok has no DVD/CD unit, so I was planning to make a Bootable USB with Windows 8.1. I used the free program Rufus and got it. But then when I change the BIOS Boot section to state boot from USB and UEFI, the system si not able to start the instaltion. Any ideas.Thank you.Bets RegardsJose

Read other answers
RELEVANCY SCORE 65.2

Hello,I've just updated BIOS using BIOS Update from your support page (https://pcsupport.lenovo.com/pl/pl/products/laptops-and-netbooks/lenovo-v-series-laptops/v110-15isk/...). After that instead of loading Windows I get boot menu. In boot menu after selecting HDD I get black screen and after few seconds boot menu appears again.Is there anything that I could do to make this work normally???

Read other answers
RELEVANCY SCORE 65.2

I updated my laptop BIOS yesterday, downloading the file from Lenovo's website. The update went well, and the laptop restarted correctly after it. Then I shut down the lapotop after using it. Today, when I switched it on, I had just the image with the write LENOVO word on it, and the circle below it running as usual. It is maybe one hour that there is this screen on. any tips? 

Read other answers
RELEVANCY SCORE 65.2

I have a Lenovo V110-15ISK where the power button does not appear to work, but if I remove and reinsert the power cable the laptop will open up the Novo Button Menu and I can boot to the hard drive from there - from that point the laptop will work fine.  Pressing the Novo button itself will not turn the laptop on. This is a work laptop so I have other laptops I can get spares from, so I've replaced the power button component, the cable, and the motherboard entirely, but the problem still persists.  Pressing the physical power button component while I had the case opened up also did not work, so I don't think it is anything to so with the plastic power button not connecting to the component. I've noticed that these Lenovos will not power on if they are sat on another Lenovo laptop (no idea why that is) so I'm wondering if whatever causes that effect could be affecting this one too, even though it is not stacked on another laptop. Any suggestions or advice gratefully received.

Read other answers
RELEVANCY SCORE 65.2

I just purchased a Lenovo Ideapad V110-15ISK with the intention of replacing the 500 gb hdd with a 480 gb ssd.  I used the Aoemei cloning software but it says the ssd is too small?  I haven't installed anything on the 500 gb hdd, I'm just going with it out of the box, so I thought cloneing to something 20 gb smaller shouldn't be an issue.  I made the Lenovo partician drive that's 24 gb smaller, to about 3 gb, and it cloned fine, but when I installed it back into the laptop, on start up I get a windows 10 boot error 0xc0000225.  I went ahead and made a boot usb and it boots, but then it wants me to install window 10 anew? I don't know what to do.  I love the laptop, I just want it running off of an ssd, and it should be simple, but I spent most of my Sunday on this and the anxiety is getting to me. I posted this a few min ago but the thread was gone a few min later, if this is improper formatting, please let me know and I'll make the changes, otherwise I'm just trying to get some help here.

Read other answers
RELEVANCY SCORE 64.4

Ok so i have Sager np9150 laptop with nvidia 670m 1.5gb ram graphic card and integrated Intel hd 4000.
the monitor im trying to connect to is a Lg Flattron wide 2000:1 digitial fine contrast with 5 ms response time. I bought a hdmi to dvi adapter cable so that i can hook the hdmi side to my laptop and the dvi side to my monitor since it doesn't have a hdmi slot.

before plugging the hdmi side into the laptop my monitor say check signal cable. when i plug the HDMI side into my laptop the check signal cable disappear and it say digital power saving and then it stay in that mode.

I don't think the cable is faulty since i try it on my desktop and extended to it and it work. I plug the HDMI into my gts250. but when i plug it on integrated card it did not work.


I've already try the fn+f key it doesn't work. i try another monitor and it work but i don't why this monitor wont work

A:My laptop cannot detect external Monitor

Have you checked your Display Options?

With the monitor connected, right click on the desktop and choose Screen Resolution. In the window that opens you can (should) see two monitors, and options for using them.

If you don't see 2 monitors, the click the Detect button and see if it is recognized then.

Read other 7 answers
RELEVANCY SCORE 64.4

I can not get my new Yogu 730 13IKB to connect to an external monitor. Worked with Lenova support and ran diagnostics and updated all drivers but can't get either port to detect an external monitor. Surely there is a solution to this issue. Lenova support is now saying that it might be the machine. Before I return the machine I would like to see if there is a solution. Great laptop, but I need it to support external monitor(s)

Read other answers
RELEVANCY SCORE 64.4

T580 (fresh from factory).  Intel(R) UHD Graphics 620 driver (12/27/2017 - 23.20.16.4905).  Intel Core i7 vPro 8th Gen.  Windows 10 64 bit (freshly updated).  Lenovo Vantage system update freshly updated.  (today's date: 4/28/2018) LG display plugged into HDMI port on Thunderbolt adapter which is plugged into the USB-C port on left side.HP display plugged into HDMI port on right side. Either display is detected just fine if I unplug the other one; but when both are present, it only detects one of them. This exact configuration was working fine on my T470, Intel Core i5, vPro, 7th Gen. So, bigger and better (and more $$) is worse. My bet would be on a driver issue.  (Windows won't let me install the Intel April 2018 driver - it says probably because the manufacturer did custom driver coding.)

A:T580 Won't detect a second external monitor

UPDATE: Well, ok, it DOES appear to TRY to "detect" the display when I first plug it in.  But it has no properties (e.g., Resolution) and the #3 icon on the layout panel soon disappears and clicking the Detect button won't bring it back (unless I unplug my other monitor - then it detects fine and works fine).

Read other 1 answers
RELEVANCY SCORE 64.4

I am trying to connect my yoga 710-14isk to my external monitor through the micro hdmi port on the side of the computer. When I plug it in and go into display settings it isn't being detected. I'm not sure if I need certain drivers to do this or what. Please let me know what I can do to make this work.Thanks

Read other answers
RELEVANCY SCORE 64.4

Hello,
I just bought an HP Envy 23" All-In-One desktop a few months ago and am just now attempting to pair it with an external monitor (TV) via the HDMI port. The computer doesn't even detect that it's been hooked up to anything and the TV still says "no signal". I tried the same HDMI cable and TV with my laptop and it works fine, so it must be the computer. Any suggestions? Is it a driver problem? I don't know much tech-wise, but am willing to try if anyone has any ideas on how I can fix this.

The operating system is Windows 8.1 and the monitor is an AOC Envision 22" TV, model number L22H998. I visited the AOC website in search of a driver and didn't see the model listed. Is there perhaps an equivalent I could use? I don't know much about drivers.

Thanks and let me know if any more info is required for an accurate diagnosis.

A:New Computer (Win 8.1) Won't Detect External Monitor

Hi Dejalive, welcome to the Eight Forums.

Couple of questions:
Is the TV signal input set to correct HDMI port (for instance if the cable is in HDMI2 in TV, the TV signal input must be set to HDMI2)?Does the Windows Screen Resolution Tool show the TV when HDMI cable is connected both to PC and TV?If Screen Resolution does not show the TV by default, does clicking the Detect button help?
Kari

Read other 13 answers
RELEVANCY SCORE 64.4

I have done what is suggested on these pages:
 

Checked the devise driver
Checked settings
Downloaded driver for EasyCam from site for my laptop
Added an extra key to the register EnableFrameServerMode =0x0

Nothing works.
 
But starting Lenovo settings, it asked me to update it. Twice I've done that and it asks again to download updates.
 
What gives? 
 
 
Mod's Edit:  this post was moved to its own thread.
 
 

Read other answers
RELEVANCY SCORE 64.4

Hello and good day, I have successfully created the free Win10PROx64 recovery media. Unfortunately I am getting the error below at the very beginning of the recovery procedure. Any help would be greatly appreciated. Thanks,Massimiliano 

Read other answers
RELEVANCY SCORE 64.4

I have done what is suggested on these pages:
 

Checked the devise driver
Checked settings
Downloaded driver for EasyCam from site for my laptop
Added an extra key to the register EnableFrameServerMode =0x0

Nothing works.
 
But starting Lenovo settings, it asked me to update it. Twice I've done that and it asks again to download updates.
 
What gives? 
 
 
Mod's Edit:  this post was moved to its own thread.
 
 

Read other answers
RELEVANCY SCORE 64.4

Recently bought v110 15isk 80tl.Right after installing Windows 7 downloaded fresh BIOS (1KCN37WW) and drivers from official site.After successfully updating BIOS the system ceased loading at "loading windows" screen.Safe mode loading stops after loading "\windows\system32\drivers\classpnp.sys"Attempts to reinstall win7 stop at "(C) Microsof Corporation" with runner screen.Downgrading BIOS to versions 28,32,33,35 didn't bring any results.It does successfully load win8pe x64 though, both in legacy support and uefi options in bios.How do I fix this problem?   

Read other answers
RELEVANCY SCORE 63.6

Hi everyone.

I have a MSI GS60 ghost pro gaming laptop which has Intel HD graphics 4600 and Nvidia GTX970M GPU, CPU i7 4720HQ, running Windows 10. I study abroad, several months ago i went back home and plugged-in my laptop to the TV via HDMI for gaming like normal. Yesterday i bought an ASUS VC239H external monitor and tried to do the same thing, but there is no HDMI input signal, the Laptop cannot detect the monitor (include display settings, intel HD graphics settings, nvidia settings). This is what i tried:

- Fn+f2, Fn+f8 keys, windows P switching to duplicate or extend or anykind of options
- plug the monitor into my friend's laptop with windows 8 through that HDMI cable and it works fine, the same with other laptop running windows 7==> cable and monitor are normal
- plug my laptop to my neighbor's smart TV. There was ''connected' symbol which appears on the TV but black screen instead of image, Laptop couldn't detect the TV
- reinstalling nvidia and onboard-graphics drivers and update to the latest
- Made a clean install of windows, tried windows 8 also but the same result
- Updated my BIOS and EC
- Bought an adapter HDMI-Mini Displayport to use the mini displayport with HDMI cable

nothing works

Im sorry that i copied my thread from other forum to here therefore some problem with the text color

A:My laptop cannot detect any external screen/monitor

Is there a setting in the BIOS that controls the use of the HDMI output - perhaps it has been inadvertently turned off.

Read other answers
RELEVANCY SCORE 63.6

Hi everyone.

I have a MSI GS60 ghost pro gaming laptop which has Intel HD graphics 4600 and Nvidia GTX970M GPU, CPU i7 4720HQ, running Windows 10. I study abroad, several months ago i went back home and plugged-in my laptop to the TV via HDMI for gaming like normal. Yesterday i bought an ASUS VC239H external monitor and tried to do the same thing, but there is no HDMI input signal, the Laptop cannot detect the monitor (include display settings, intel HD graphics settings, nvidia settings). This is what i tried:

- Fn+f2, Fn+f8 keys, windows P switching to duplicate or extend or anykind of options
- plug the monitor into my friend's laptop with windows 8 through that HDMI cable and it works fine, the same with other laptop running windows 7==> cable and monitor are normal
- plug my laptop to my neighbor's smart TV. There was ''connected' symbol which appears on the TV but black screen instead of image, Laptop couldn't detect the TV
- reinstalling nvidia and onboard-graphics drivers and update to the latest
- Made a clean install of windows, tried windows 8 also but the same result
- Updated my BIOS and EC
- Bought an adapter HDMI-Mini Displayport to use the mini displayport with HDMI cable

nothing works

Im sorry that i copied my thread from other forum to here therefore some problem with the text color

Read other answers
RELEVANCY SCORE 63.6

My just arrived XPS 15 9550 which I have updated to the currently newest drivers (BIOS, Chipset, Video, Audio) does not detect any external display via HDMI. It says no external display has been detected. My previous Dell notebook had no issues at all.
Any ideas what the problem might be and how to fix it?
Many thanks in advance!

A:XPS 15 9550 HDMI does not detect external monitor

I have the same issue.  New Dell, applied all updates.  No luck so far.

Read other 3 answers
RELEVANCY SCORE 63.6

I have a hp pavilion dv7. It has treated me good until I upgraded to windows 7. Windows 7 does not recognize a monitor from vga or hdmi. I just recived me view sonic monitor in the mail to find my laptop does not agree. I have called hp and view sonic, neiter can help. Please Help! I have installed and re installed the driver, I don't know what else to do!

A:Windows 7 wont detect external monitor

right click on the desktop and go to properties, once in there check for a display tab or something like that

if you see 2 'monitors' in there, simple check 'extend monitor'

should work.

if not use the go by from HP, in this example they are connecting a TV and an External Monitor, disregard steps for TV.

Using Two or More Displays in Windows 7 HP Pavilion dv7-1175nr Entertainment Notebook PC - HP Customer Care (United States - English)

Read other 2 answers
RELEVANCY SCORE 63.6

Hi I have a Yoga 910. I had a Dell SE2417HG 24" screen that I would connect through an Alogic hub (HDMI to USB-C) with no issues.I decided to upgrade my monitor to something a bit bigger and got a Benq GC2870H 28". But the yoga isnt detecting it.I checked and the monitor connects to my work laptop no troubles, both through the hub and straight HDMI. Ive had a look through the posts and tried some suggestions (updated everything etc). But as the hub worked before and doesnt now, is it the monitor ? Any ideas how I can get this to work?  Apreciate your help!

Read other answers
RELEVANCY SCORE 63.6

Had this issue, found a resolution so sharing it here, hopefully it may help someone searching here for the same issueWindows 7 64bit OS Driver install kept timing out - did a registry edit to extend the timeout to 1800 - driver installed fine although it took a while offsite link:https://kb.stonegroup.co.uk/how-to-fix-realtek-audio-driver-wont-install-error-code-0x000005b4-displ...

Read other answers
RELEVANCY SCORE 63.2

Hi guys, I enjoy using my v110-15isk laptop, but have some video card problems. I tried different ways but cant solve. I hope there are some suggestions here..  System: Lenovo v100-15ISK 80TL, Intel HD Graphics 520 (Onboard), AMD Radeon R5 M430Symthoms: Program crash when Autocad and Google Earth start. OS: I have dual boot on my laptop: Windows 10x64Bit V.1709 (Fall Creators Update) and Windows 7x64Bit.Both windows are updated but they have same problem. Additional info:1-When i set AMD disabled in BIOS, programs work normally but then system is in low video capability mode of course.2-When both video card are installed and i set Autocad on power saving mode in AMD settings then Autocad works but so slow. GoogleEarth does not start (in openGL mode) or start (in directX mode) without navigating world frame.3-I have tried different driver versions but no difference.4-I have tested hardware with Lenovo Diagnostics. It says others are OK but Intel HD520 test failed on "mathematichal operations test" (Program crashs and close). I think main problem is driver conflicts. But how will i solve it?

Read other answers
RELEVANCY SCORE 63.2

I have a brand new ThinkPad X1 Carbon 6th gen and I can connect it to projectors (I already presented power point presentations), but it does not detect external monitors using HDMI. As has been mentioned in other posts, where similar problems got solved, I tried different cables that I know work, I tried to do the power reset mentioned in other posts, I updated BIOS (V.1.37), I updated the Thunderbolt Firmware (V.17.0.0.1), and Intel Thunderbolt Controller Driver (V.17.4.78.500). Under Device Manager > Systems I see ThunderboltTM) Controller - 15D2. But even if I go in Windows 10 to System > Display and press "Detect", it doesn't recognize an external display. Thank you very much for your help and suggestions!

Read other answers
RELEVANCY SCORE 62.4

My laptop is pending on boot menu and whatever I choose among booting choices the same menu is opened again , the problem began after a BIOS update was suggested by the computer itself . 

Read other answers
RELEVANCY SCORE 62.4

```[[email protected] ~]$ inxi -FxSystem:    Host: master-pc Kernel: 4.12.9-1-MANJARO x86_64 (64 bit gcc: 7.1.1) Desktop: i3 4.13           Distro: Manjaro LinuxMachine:   Device: laptop System: LENOVO product: 80TL v: Lenovo V110-15ISK           Mobo: LENOVO model: Lenovo V110-15ISK v: NO DPK UEFI: LENOVO v: 1KCN28WW date: 11/15/2016Battery    BAT0: charge: 31.7 Wh 99.6% condition: 31.8/32.0 Wh (99%) model: LGC L15L4A02 status: N/ACPU:       Dual core Intel Core i3-6006U (Skylake rev.3) (-HT-MCP-) cache: 3072 KB           flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx) bmips: 7970           clock speeds: max: 2000 MHz 1: 1000 MHz 2: 1000 MHz 3: 1000 MHz 4: 1000 MHzGraphics:  Card-1: Intel HD Graphics 520 bus-ID: 00:02.0           Card-2: Advanced Micro Devices [AMD/ATI] Sun XT [Radeon HD 8670A/8670M/8690M / R5 M330 / M430]           bus-ID: 01:00.0           Display Server: x11 (X.Org 1.19.3) driver: intel Resolution: [email protected]           OpenGL: renderer: Mesa DRI Intel HD Graphics 520 (Sky... Read more

Read other answers