Over 1 million tech questions and answers.

BSOD dont know how to read dump files but have attached

Q: BSOD dont know how to read dump files but have attached

Hi,

I get random BSOD a lot since updating from 8 to 8.1. I don't know how to interpret these files, but I followed the instructions to make a zip with the diagnostics tool. I've attached this file, anyone who could help me interpret what is going wrong would be greatly appreciated.

Thanks

RELEVANCY SCORE 200
Preferred Solution: BSOD dont know how to read dump files but have attached

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: BSOD dont know how to read dump files but have attached

Hi pinksock.

Your BSODs are all stop 0x109 and they are not showing any possible cause.

Test your RAM modules for possible errors.
How to Test and Diagnose RAM Issues with Memtest86+
Run memtest for at least 8 passes, preferably overnight.

If it start showing errors/red lines, stop testing. A single error is enough to determine that something is going bad there.

Stress test the CPU.
Hardware - Stress Test With Prime95

If those tests are free from errors, enable Driver Verifier to monitor the drivers.
Driver Verifier - Enable and Disable
Run Driver Verifier for 24 hours or the occurrence of the next crash, whichever is earlier.



Information
Why Driver Verifier:
It puts a stress on the drivers, ans so it makes the unstable drivers crash. Hopefully the driver that crashes is recorded in the memory dump.

How Can we know that DV is enabled:
It will make the system bit of slow, laggy.



Warning
Before enabling DV, make it sure that you have earlier System restore points made in your computer. You can check it easily by using CCleaner looking at Tools > System Restore.

If there is no points, make a System Restore Point manually before enabling DV.



Tip

If you fail to get on the Desktop because of DV, Boot into Advanced Boot Options > Safe mode. Disable DV there. Now boot normally again, and try following the instruction of enabling DV again.
If you cannot boot in Safe mode too, do a System Restore to a point you made earlier.

Let us know the results, with the subsequent crash dumps, if any. Post it following the Blue Screen of Death (BSOD) Posting Instructions.
__________________________________________________________________________________________________

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 109, {a3a01f58967ff692, b3b72bdee8ff2c6d, ffffe00000fc20d0, 1c}

Probably caused by : Unknown_Image ( ANALYSIS_INCONCLUSIVE )

Followup: MachineOwner
---------

0: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

CRITICAL_STRUCTURE_CORRUPTION (109)
This bugcheck is generated when the kernel detects that critical kernel code or
data have been corrupted. There are generally three causes for a corruption:
1) A driver has inadvertently or deliberately modified critical kernel code
or data. See http://www.microsoft.com/whdc/driver/kernel/64bitPatching.mspx
2) A developer attempted to set a normal kernel breakpoint using a kernel
debugger that was not attached when the system was booted. Normal breakpoints,
"bp", can only be set if the debugger is attached at boot time. Hardware
breakpoints, "ba", can be set at any time.
3) A hardware corruption occurred, e.g. failing RAM holding kernel code or data.
Arguments:
Arg1: a3a01f58967ff692, Reserved
Arg2: b3b72bdee8ff2c6d, Reserved
Arg3: ffffe00000fc20d0, Failure type dependent information
Arg4: 000000000000001c, Type of corrupted region, can be
0 : A generic data region
1 : Modification of a function or .pdata
2 : A processor IDT
3 : A processor GDT
4 : Type 1 process list corruption
5 : Type 2 process list corruption
6 : Debug routine modification
7 : Critical MSR modification

Debugging Details:
------------------
CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT

BUGCHECK_STR: 0x109

PROCESS_NAME: System

CURRENT_IRQL: 2

STACK_TEXT:
ffffd000`20994088 00000000`00000000 : 00000000`00000109 a3a01f58`967ff692 b3b72bde`e8ff2c6d ffffe000`00fc20d0 : nt!KeBugCheckEx
STACK_COMMAND: kb

SYMBOL_NAME: ANALYSIS_INCONCLUSIVE

FOLLOWUP_NAME: MachineOwner

MODULE_NAME: Unknown_Module

IMAGE_NAME: Unknown_Image

DEBUG_FLR_IMAGE_TIMESTAMP: 0

BUCKET_ID: BAD_STACK

Followup: MachineOwner
---------

Read other 4 answers
RELEVANCY SCORE 82.8

from past 1 month this bsod has started again.. don't know why..
plz help

A:BSOD....dump files attached

Pretty simple, AVG appears to be causing it. Please remove it with this tool: http://download.avg.com/filedir/util...avgremover.exe

Install MSE instead (also free): http://www.microsoft.com/security_essentials


...Summary of the Dumps:
Code:

Built by: 7600.16617.x86fre.win7_gdr.100618-1621
Debug session time: Tue Aug 17 00:09:25.956 2010 (UTC - 4:00)
System Uptime: 0 days 1:00:17.063
BUGCHECK_STR: 0x4E_99
PROCESS_NAME: svchost.exe
??????????????????????????????????????????????????????????????????????????????????????
Built by: 7600.16617.x86fre.win7_gdr.100618-1621
Debug session time: Sun Aug 15 23:21:45.877 2010 (UTC - 4:00)
System Uptime: 0 days 0:07:37.984
BUGCHECK_STR: 0x1a_3452
PROCESS_NAME: avgcsrvx.exe
??????????????????????????????????????????????????????????????????????????????????????
Built by: 7600.16617.x86fre.win7_gdr.100618-1621
Debug session time: Thu Aug 12 02:32:54.531 2010 (UTC - 4:00)
System Uptime: 0 days 1:05:40.638
BUGCHECK_STR: 0x1a_61940
PROCESS_NAME: explorer.exe
??????????????????????????????????????????????????????????????????????????????????????
Built by: 7600.16539.x86fre.win7_gdr.100226-1909
Debug session time: Mon Aug 9 02:53:02.422 2010 (UTC - 4:00)
System Uptime: 0 days 4:03:04.530
BugCheck A, {c0019078, 0, 0, 828c561e}
Probably caused by : memory_corruption ( nt!MiEmptyWorkingSet+16f )
BUGCHECK_STR: 0xA
PROCESS_NAME: avgchsvx.exe
??????????????????????????????????????????????????????????????????????????????????????
Built by: ... Read more

Read other 1 answers
RELEVANCY SCORE 81.6

Hey guys,

I hope someone can help me. I got some dump files from a client's computer i built a few months ago. Its a brand new build, modern hardware, windows 7 pro.

Never had an issue with it when i was building it. now about every 2-3 weeks it gets a BSOD. Since it is a client machine, i dont know when it happens or how it happens or why. All i have with me is the mini dump files.

can someone take a look at it for me? Thanks

Specs:

EVGA H55 Mobo
Intel Core i3
no video card - uses the new onboard chip rendering on the i3
4 gb ram 1033
430W PSU Antec
 

A:Win 7 Pro x64 BSOD, can't figure it out, dump files attached

F.Y.I. the mods will most likely move this to the BSOD forum.

I read the first five minidumps of Zip1 and the first four are the same error code of 0x00000050: PAGE_FAULT_IN_NONPAGED_AREA
Requested data was not in memory. An invalid system memory address was referenced. Defective memory (including main memory, L2 RAM cache, video RAM) or incompatible software (including remote control and antivirus software) might cause this Stop message, as may other hardware problems (e.g., incorrect SCSI termination or a flawed PCI card).

All four specifically cited corrupted memory as the issue. You'll need to run Memtest for a minimum of 7 Passes (the more the better) unless you start receiving errors before hand. If so then run it per stick. Any errors and that memory stick needs to be replaced.


*** If Memtest shows no errors then find the voltage specs of your RAM and compare it to the voltage setting in your BIOS. Do they match?
 

Read other 9 answers
RELEVANCY SCORE 81.6

I've built a computer and it keeps crashing.

motherboard dh67clb3

2 pair of Corsair TW3X4G1333C9 XMS3 4GB 2 X 2 GB PC3-10666 1333Mhz Dual Channel 240-pin DDR3

Diablotek 750-Watt ATX Power Supply PHD750

Intel Core i5-2500 Processor 3.3GHz 6 MB Cache Socket LGA1155

C:\ Lexar Media Crucial 64 GB m4 2.5-Inch Solid State Drive SATA 6Gb/s CT064M4SSD2

D:\ Western Digital WD Caviar Black 1 TB SATA 6 GB/S 7200 RPM 64 MB Cache Internal Bulk/OEM 3.5-Inch Desktop Hard Drive

Any help interpreting the dump files and error reports would be appreciated, thanx.

A:BSOD Bccode 1a dump files attached

Test your RAM, seems to be a Memory Management issue
RAM - Test with Memtest86+

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

MEMORY_MANAGEMENT (1a)
# Any other values for parameter 1 must be individually examined.
Arguments:
Arg1: 0000000000041790, The subtype of the bugcheck.
Arg2: fffffa8002040b40
Arg3: 000000000000ffff
Arg4: 0000000000000000

Debugging Details:
------------------
BUGCHECK_STR: 0x1a_41790

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

PROCESS_NAME: MRT.exe

CURRENT_IRQL: 0

LAST_CONTROL_TRANSFER: from fffff80001b03e40 to fffff80001a95d00

STACK_TEXT:
fffff880`17dfd818 fffff800`01b03e40 : 00000000`0000001a 00000000`00041790 fffffa80`02040b40 00000000`0000ffff : nt!KeBugCheckEx
fffff880`17dfd820 fffff800`01a8317f : fffffa80`00000000 00000000`09ff0fff 00000000`00000000 00000000`00000000 : nt! ?? ::FNODOBFM::`string'+0x36024
fffff880`17dfd9e0 fffff800`01a94f93 : ffffffff`ffffffff 00000000`028ce530 00000000`028ce4f8 00000000`00008000 : nt!NtFreeVirtualMemory+0x61f
fffff880`17dfdae0 00000000`771914fa : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`0000000... Read more

Read other 8 answers
RELEVANCY SCORE 81.6

Hi

I have been given a laptop that has never worked correctly. It's pretty much unused, but crashes soon after booting. I have run a CHKDSK and no errors were found.

The dump files are attached - any help will be much appreciated.

A:BSOD soon after boot. Dump files attached.

upload your MSINFO32.nfo file.
Click on the start button
Type "msinfo32" (without quotes) in the search bar of the start menu, click the resulting link. It will open the System Information window.
File>Save. In the "File Name" filed, put "MSINFO32" (without Quote), give the save location to desktop, and click the "save" button.
Give the time for processing, it will save a .nfo file on your desktop.
Zip it, and upload it following the instruction.
Stop 0x50, Ntfs

Read other 9 answers
RELEVANCY SCORE 81.6

For the past week or so I have been getting the BSOD, sometimes multiple times a day, when I'm actively using my computer and have also opened it back up to find them after I've been at work, I have tried everything I can think of to figure out what the problem is but it is beyond my skills, so I am hoping someone here might be able to help me out. I have attached the dump files to this post. I appreciate any guidance you can offer, thanks!

Read other answers
RELEVANCY SCORE 81.6

Hello, I keep getting a BSOD error. I don't know what is the cause so I am putting the dump up here and hopefully someone can help me find the cause.

A:BSOD Crashing/dump files attached

Here is my pc specs as well:

Sony VAIO Notebook
AMD ATHLON(tm) II P320 Dual-Core Processor 2.10 GHz
4GB RAM
64-bit Operating System
Windows 7 Home Premium
Service Pack 1

Read other 1 answers
RELEVANCY SCORE 81.6

Can someone please help me, I get a BSOD about once a day, sometimes every other day. System boots back up ok but would like to solve it. I have zipped and attached the dump files.I am new here but from reading other threads it looks like some very knowledgeable and helpful people on here.

Regards Guy

A:BSOD ntoskrnl.exe - dump files attached

Hi,
Unfortunately the installation appears non-genuine.
The Key is that of a HP OEM computer - and the motherboard is a retail one by Asus.
There is no point analysing your crash logs as your BSOD issues may stem from a counterfeit install.



The best course of action will be to:Purchase a legitimate Windows 7 licence.
Format the HDD.
Reinstall Windows and activate.
Cheers

Dave

Read other 3 answers
RELEVANCY SCORE 81.6

For the past couple weeks I have been getting the BSOD, sometimes multiple times a day, when I'm actively using my computer and have also opened it back up to find them after I've been at work, I have tried everything I can think of to figure out what the problem is but it is beyond my skills, so I am hoping someone here might be able to help me out. I have run my anti-virus as well as malwarebytes and they both finish up clean. I have attached the dump files to this post. I appreciate any guidance you can offer, thanks!

I am running Windows 7 Home Premium 64 bit on a Toshiba Satellite L755 laptop
 

Read other answers
RELEVANCY SCORE 81.6

I was in the middle of a game when it went to BSOD. I can't remember the last time I had one, I've made no hardware or driver changes to my system in a long, long time.

It IS pretty hot where I am and my computer was on for almost 7 days at the time and I also had a ton of other programs open at the same time. Was it a simple memory problem or is it something more that I should be concerned about?

I run CPUID Hardware Monitor to check my temps and nothing was out of the ordinary just prior to this (even after gaming, temps were normal).

Thanks for any help!

---

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.768.3
Locale ID: 1033
Additional information about the problem:
BCCode: 124
BCP1: 0000000000000000
BCP2: FFFFFA80050A6038
BCP3: 00000000B2000040
BCP4: 0000000000000800
OS Version: 6_1_7600
Service Pack: 0_0
Product: 768_1

A:Can anyone tell me what caused this BSOD? Dump files attached

Hi,

1. Remove RivaTuner (it could be relabelled as MSI Afterburner? I can't tell from the info given)

2. Update your graphics drivers - http://www.nvidia.com/Download/index.aspx?lang=en-us

3. Remove SPTD.sys. It is known to cause BSODs; remove Daemon Tools, then use this SPTD installer to remove it (pick the uninstall option when you run the installer): http://www.duplexsecure.com/en/downloads

4. Run some hardware tests:


Quote:




Memtest86+ - Instructions:

Download the ISO (or the .exe for USB drives) from here http://www.memtest.org/#downiso

Then (if you have chosen the ISO) burn the ISO using IsoRecorder: ISO Recorder v3 Download (How to use IsoRecorder)

Boot from the CD/USB and run the test (at least 7 passes per test) with only one stick of RAM in place at a time.

It is a time consuming process but it is the only way to be sure it isn't a RAM fault.

For your final test, run the test with all the RAM in place.




http://www.sevenforums.com/tutorials...t-prime95.html (run the Blend test as well as the Small FFT test)

http://www.sevenforums.com/tutorials...t-furmark.html

5. If you get any more BSODs, then follow these http://www.techsupportforum.com/f217...ml#post2545708

Also, what Brand/Model PSU do you have?

Regards,
Reventon

BUGCHECK SUMMARY

Code:

Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Debug session time: Sun Nov 7 19:05:59.404 2010 (GMT+13)
System Uptime: 7 days 9:54... Read more

Read other 3 answers
RELEVANCY SCORE 81.6

I think I've followed all the BSOD posting instructions. BSOD happened the first time after I finished downloading GW2 for the free trial weekend. I've tried system restore twice and it worked for a day, then back to the same thing. I have no idea what I'm doing. Thank you in advance for any help!

A:BSOD on start-up. Dump-files attached

Hello SpiritSprite, Welcome to SF

First off if your OCing in anyway stop, return everything to stock settings for the purposes of testing

If you havent already, fill in your system specs so we know what we are dealing with
System Info - See Your System Specs

Run some scans to check against virus or infection
http://support.kaspersky.com/5350
Windows Defender Offline

Run some basic hardware tests
RAM - Test with Memtest86+
Disk Check (windows based check)
Hard Drive Diagnostic Procedure (bootable disk check)

Theres a lot of dumps there i ran the ones for december and they are a mix of
0x1E KMODE_EXCEPTION_NOT_HANDLED BSOD Index
0xA IRQL_NOT_LESS_OR_EQUAL BSOD Index
0x50 PAGE_FAULT_IN_NON_PAGED_AREA BSOD Index

I would run through the above and in particular memtest, make sure you run it for multiple passes or preferably overnight

Read other 2 answers
RELEVANCY SCORE 80.8

I have been using my laptop frm past 2 years. Now from past few days I get a bsod and the dump file is getting created. I checked the forum and found few details and I have attached the dump file that was created. could you please tell me why is this happening??

A:Getting BSOD and laptop getting restarted, dump files attached

Need more information.

Run this .bat file as administrator. Locate the .ZIP file it creates on desktop, and upload here in next reply.

Attachment 301106

Read other 3 answers
RELEVANCY SCORE 80.8

hello,

my pc is getting a BSOD whenever I restart or shutdown, apart from those times it runs perfectly well. I recently relocated my page file off of my SSD onto one of my other HDD's but have allocated the same size of page file.

Apart from that change I havent installed or done anything else of note recently to cause these BSOD's.

So far I have checked my RAM, checked the integrity of my windows files, disabled the drivers of my graphics card, audio card, modem and restarted (recieving the same BSOD with all disabled) and run windows in safe mode with networking, in which it restarted fine.

My dump files can be found here

any help or analysis of my dump files would be great thanks.

A:BSOD on restart and shutdown, dump files attached

  
Quote: Originally Posted by mrmimz


hello,

my pc is getting a BSOD whenever I restart or shutdown, apart from those times it runs perfectly well. I recently relocated my page file off of my SSD onto one of my other HDD's but have allocated the same size of page file.

Apart from that change I havent installed or done anything else of note recently to cause these BSOD's.

So far I have checked my RAM, checked the integrity of my windows files, disabled the drivers of my graphics card, audio card, modem and restarted (recieving the same BSOD with all disabled) and run windows in safe mode with networking, in which it restarted fine.

My dump files can be found here

any help or analysis of my dump files would be great thanks.


Most recent crash was blamed on eketo.exe and there is no English reference to it. I would download malwarebytes and run it.

Read other 2 answers
RELEVANCY SCORE 80.8
A:BSOD While playing games .. please help!!! .Dump files attached

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

CRITICAL_STRUCTURE_CORRUPTION (109)
This bugcheck is generated when the kernel detects that critical kernel code or
data have been corrupted. There are generally three causes for a corruption:
1) A driver has inadvertently or deliberately modified critical kernel code
or data. See Patching Policy for x64-Based Systems
2) A developer attempted to set a normal kernel breakpoint using a kernel
debugger that was not attached when the system was booted. Normal breakpoints,
"bp", can only be set if the debugger is attached at boot time. Hardware
breakpoints, "ba", can be set at any time.
3) A hardware corruption occurred, e.g. failing RAM holding kernel code or data.
Your crash dumps are not showing any finite probable cause.

Test your RAM modules for possible errors.
How to Test and Diagnose RAM Issues with Memtest86+
Run memtest for at least 8 passes, preferably overnight.

If memtest comes free from errors, enable Driver Verifier to monitor the drivers.
Driver Verifier - Enable and Disable
Run Driver Verifier for 24 hours or the occurrence of the... Read more

Read other 1 answers
RELEVANCY SCORE 80.8

Hey all,

I've been having about 2-3 BSOD's a month since I built this computer, and since they were fairly intermittent and my rig rebooted immediately after, I had been ignoring them. However, since yesterday I have had about 4-5 of them and decided it's about time I poked around looking for a solution.

Details:
>I'm not sure what causes them. It never seems to be when I'm doing the same thing. For example, last night I was simply watching Netflix. Earlier today it happened when working in MS Word.
>I have not done any overclocking until today. I wanted to see if I could get anything with my GPU, but with black screening with even +50MHz, I decided it wasn't worth it and reapplied default settings.
>I was poking around in my BIOS earlier and discovered my RAM is operating at 1333 rather than the rated 1600. A couple of hours later, I had another BSOD, but because of the gap in time I can't be sure if that caused it. I dropped it back down to 1333 just to be sure.
>Booting up has been really sluggish today specifically.

That's everything I can think would be pertinent.

I talked with MS support and they want 100 bucks to help out. I'm looking to avoid that.

Any help would be vastly appreciated,
Derek Dordan

A:BSOD With Unknown Triggers (Dump Files Attached)

Hi ...







  
Quote: Originally Posted by Golden



Additional information is required.

1. Download the Designer Media Log Collector application to your desktop by clicking the icon below

2. Run it by double-clicking the icon on your desktop, and follow the prompts.
3. Locate the .ZIP file created on your desktop, and upload it here in your next reply.

Read other 9 answers
RELEVANCY SCORE 80.8

Hello everyone. I am a newbie here and really need some help. I have a few dump files attached and was able to open them in debugger but don't truly understand what it could mean. If anyone could please take a look at them and tell me if it is a hardware issue that would be great.

I have tried chkdsk, CPU stress test, GPU stress test, Power supply stress test, and RAM test, all passed.

Any help would be greatly appreciated.

Thanks in advance.

A:BSOD during random times, dump files attached

Welcome aboard.

Code:
fffff880`0937ae58 fffff800`032fdda4 nt!RtlSplay+0x2
fffff880`0937ae60 fffff880`017070b4 Ntfs!NtfsAllocateMftRecord
fffff880`0937ae68 fffff800`03256000 nt!KiSelectNextThread <PERF> (nt+0x0)
fffff880`0937ae70 fffff800`034dd000 nt!BBTBuffer <PERF> (nt+0x287000)
fffff880`0937ae78 fffff880`01649000 Ntfs!NtfsFreeReservedMdl <PERF> (Ntfs+0x0)
fffff880`0937ae80 fffff880`016b2b34 Ntfs!__PchSym_ <PERF> (Ntfs+0x69b34)
fffff880`0937ae88 fffff880`01649000 Ntfs!NtfsFreeReservedMdl <PERF> (Ntfs+0x0)
fffff880`0937ae90 fffff880`016b2b64 Ntfs!__PchSym_ <PERF> (Ntfs+0x69b64)
fffff880`0937ae98 fffff880`01649000 Ntfs!NtfsFreeReservedMdl <PERF> (Ntfs+0x0)
fffff880`0937aea0 fffff880`016b2d98 Ntfs!__PchSym_ <PERF> (Ntfs+0x69d98)
fffff880`0937aea8 fffff880`01649000 Ntfs!NtfsFreeReservedMdl <PERF> (Ntfs+0x0)
fffff880`0937aeb0 fffff880`016b26fc Ntfs!__PchSym_ <PERF> (Ntfs+0x696fc)
fffff880`0937aeb8 fffff880`01649000 Ntfs!NtfsFreeReservedMdl <PERF> (Ntfs+0x0)
fffff880`0937aec0 fffff880`016af684 Ntfs!__PchSym_ <PERF> (Ntfs+0x66684)
In this situation, you should check the discs.
Re-seat the sata and power.
Run chkdsk /f/r, following the option two of the tutorial Disk Check
Seatool for dos: SeaTools | Seagate download
Burn it in a blank cd. boot from the CD, click on "Accept", wait for it to finish detecting the drives, then in the upper left corner select "Basic Tests&qu... Read more

Read other 1 answers
RELEVANCY SCORE 80.8

I just built my new pc a couple weeks ago and have been having trouble with constant bsod since the start. Since it was new build i didnt want to jump to conclusions with hardware and instead updated all drivers bios etc but still has problems. A weird thing is i can play games fine its just when they are loading that it would crash not during play time even then its rare (manage to play gta for about 6 hours straight no crashes) however during other things like using the internet or downloading it will crash frequently. i have attached the dump files from my last few crashes to this post.

I would also like to add that i tested my ram with memtest86+ and founf one of the sticks to be faulty and im running my pc on 4gb atm until my new ram arrives however the bsod still occurs even eith the ram that passed.

Read other answers
RELEVANCY SCORE 80

Windows 7
GIGABYTE MOBO
AMD RADEON R9 200 GPU
AMD CPU
8 GIG ram

Troubleshooting so far.
Disabled Hibernation
Disabled Turbo Boost in Bios
Uninstalled Video Card (when uninstalled sleep is not an option anyways) then reinstalled
____

I'm not overclocked. Everything is standard. New install of OS, all updates installed. Can do everything fine except wake up from sleep.

I've checked forums, googled named processes and followed steps in threads i would find, found hot fixes for the error codes (all of which say not applicable).

Check out my DUMP and let me know what you think.

https://drive.google.com/file/d/0B4n...ew?usp=sharing

A:BSOD after sleep, dump files attached, troubleshooted quite a bitsofar

Before posting a BSOD thread, please read the instructions here: Blue Screen of Death (BSOD) Posting Instructions

If you need to add new information like the dump files, please make a new post in your initial BSOD thread. Please do not make an extra new thread.

Read other 1 answers
RELEVANCY SCORE 80

Hi all,
I have received a number of BSOD's in the past 2-3 days. They have started occurring out of the blue, as I had not had one in a very long time (perhaps a year or so), and last time it was due to faulty RAM. This time I have very little understanding of the cause. I have used the Windows Debugger to analyze the crash dump, and have attached a .txt output of the analysis, and I have also attached a DM Log Collector zip file of the crash dumps.

For quick reference, here is the beginning of the output from Windows Debugger:

DRIVER_POWER_STATE_FAILURE (9f)
A driver has failed to complete a power IRP within a specific time.
Arguments:
Arg1: 0000000000000003, A device object has been blocking an Irp for too long a time
Arg2: fffffa8004989a10, Physical Device Object of the stack
Arg3: fffff80000b9a3d8, nt!TRIAGE_9F_POWER on Win7 and higher, otherwise the Functional Device Object of the stack
Arg4: fffffa8003a9c870, The blocked IRP

Thanks in advance

Read other answers
RELEVANCY SCORE 79.6

Hello everyone,

I am running Windows 7 Utimate 64-bit and I have gotten many random BSOD's while being use on internet . I have opened the dump files. And all of them say that probable cause is: ntoskrnl.exe ( nt+71f00 ).

Attachment 53661

I have attached a .zip file with these dump files too.
I've passed the test of memory, no erreurs was dectected.

Any information very much appreciated.

A:BSOD Please help me to read my dump files

Please help me, many thanks to you.

Read other 9 answers
RELEVANCY SCORE 79.6

Hello everyone,

I am running Windows 7 Pro 32bit on HP and I have gotten many random BSOD's while being use on internet (play game online). I have updated lastest Windows , VGA, all driver from HP but still have BSOD. I can not read dump files. please help me

Thanks

A:BSOD Please help me to read my dump files

Only ran the 9 memory dumps from July - the one's from May (a total of 21) suggest the same thing.
The 9 from July are STOP 0x1 errors - Although I did see one STOP 0x119 (video driver) error in the May dumps along with several other errors blaming your ATI video drivers.

If you haven't done anything to fix the May errors (there were no errors in June), then please do the following:
- download the Display Driver only (NOT the entire Catalyst Control Center) from Global Provider of Innovative Graphics, Processors and Media Solutions | AMD
- uninstall the current ATI stuff from your system
- install the Display Driver and monitor for further BSOD's.

Then, if the errors are still occurring, try running Driver Verifier according to these directions:





Quote:
Using Driver Verifier is an iffy proposition. Most times it'll crash and it'll tell you what the driver is. But sometimes it'll crash and won't tell you the driver. Other times it'll crash before you can log in to Windows. If you can't get to Safe Mode, then you'll have to resort to offline editing of the registry to disable Driver Verifier.

So, I'd suggest that you first backup your stuff and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Win7 Startup Repair feature).

Then, here's the procedure:
- Go to Start and type in "verifier" (without the quotes) and press Enter... Read more

Read other 1 answers
RELEVANCY SCORE 79.6

I've been running out of ideas now, and windbg somehow doesn't make me open the .dmp files, so I'm desperately asking for help :( I don't know what's wrong with my computer with the tons of BSOD.

Here's the link with attached dump file:
https://drive.google.com/open?id=1kuRVG6KLZhXM3NTuzguDFFDdiyhzDj5S

Read other answers
RELEVANCY SCORE 78.8

just got a new comp and final fantasy 14, put it in clicked english for my language and boom blue screen, didnt even get a chance to install and it happened 5 times after troubleshooting, i got system_service_exceeption for an error, finally found my dump files and zipped it with a system health report. please if anyone can decipher this THANKS IN ADVANCE

A:BSOD, someone read my dump files pleeease

Hi -

All 5 dumps had the same bugcheck -

0x3b (0xc0000005,,,) = system service threw an exception - 0xc0000005 = memory access violation. No probable cause named.

I found a loaded driver belonging to Symantec/ Norton -

Code:

SRTSPX64.SYS Wed Dec 02 00:58:24 2009 (4B160200)
Was there a trial offer on the new system for NIS, N360, other Norton product?

Run Norton Removal Tool - http://jcgriff2.com/NRT_N360_Removal.html

Is Webroot anti-virus only or an Internet Security app with a firewall? If firewall - remove Webroot; reboot upon comletion. Install MSE

Run the Driver Verifier -- http://jcgriff2.com/driver_verifier.htm


Windbg Logs
--> http://jcgriff2.net/BSOD_Logs/_99-db..._jcgriff2_.txt
--> http://jcgriff2.net/BSOD_Logs/_99-db...riff2_.txt.zip

Regards. . .

jcgriff2


`

BSOD BUGCHECK SUMMARY

Code:

Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Debug session time: Wed Sep 22 18:13:56.334 2010 (GMT-4)
System Uptime: 0 days 0:15:30.551
Probably caused by : ntkrnlmp.exe ( nt!PspInsertProcess+40 )
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0x3B
PROCESS_NAME: explorer.exe
Bugcheck code 0000003B
Arguments 00000000`c0000005 fffff800`033800c0 fffff880`056f6620 00000000`00000000
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Debug session time: Wed Sep 22 17:43:09.841 2010 (GMT-4)
System Upt... Read more

Read other 4 answers
RELEVANCY SCORE 78.8

i get these Page fault error alot

installed 3 months ago exactly after i biut this PC Win 7 x64

Please look into these Minidumps

A:BSOD in almost every action that i do Please read these dump files

Please remove any CD/DVD virtualization software, such as Daemon Tools/Alcohol 120%, as they use a driver called sptd.sys that is known to cause BSODs. Use add/remove programs to remove the software. After removing the software, use the sptd.sys uninstaller to remove sptd.sys from the system.

I prefer TotalMounter as my CD/DVD virtualization software as it allows me to burn images to a virtual CD/DVD if I just want an ISO file instead of a disc, and it is free.

Many use MagicISO - Convert BIN to ISO, Create, Edit, Burn, Extract ISO file, ISO/BIN converter/extractor/editor as well, which is also free.
Crashes are pointing to memory problems or driver conflicts.If you are overclocking any hardware, please stop.

Run the boot version of Memtest86+ paying close attention to Parts 2 and 3 of the tutorial. Also, in case Memtest86+ misses anything and comes up with no errors, run the extended version of the Windows Memory Diagnostics Tool for at least five passes. These you may want to run overnight since they take a long time to complete (run them an hour before bed each of the next two nights and check before going to sleep that they are still running).


   Warning
Before you proceed with the following, answer these two questions: Are you still under warranty? Does your warranty allow you to open up the machine to check hardware? If you are unsure of the answers to these questions, contact your system manufacturer. WARNING: The steps that follow can void your... Read more

Read other 1 answers
RELEVANCY SCORE 78

I'm hoping someone can help me with my problem. I have Windows 7 Home 64-bit. Whenever I try to upload a document (like an email attachment) I get the BSOD. It occurs when my document box pops up so I can select the document I want to attach. The box doesn't fully load - and BSOD. This occurs in email and other websites in Firefox, Chrome and Open... but not in IE for whatever reason. IE is ok. When troubleshooting, I attempted to read the dump files - but BSOD again. I do have the info when my computer reboots and I'm hoping someone can help me:

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 1033

Additional information about the problem:
BCCode: 1e
BCP1: FFFFFFFFC0000005
BCP2: FFFFF88007BBCC40
BCP3: 0000000000000000
BCP4: 0000000000000000
OS Version: 6_1_7601
Service Pack: 1_0
Product: 768_1
 

A:BSOD when trying to Upload Documents or Read Dump Files

Hello BookNerdGirl and Welcome to TSG!

Please go to C:\Windows and copy the minidump folder to the desktop. Compress it and upload it here. Click Go Advanced and scroll down to Manage Attachments to do this.
 

Read other 2 answers
RELEVANCY SCORE 78

I'm hoping someone can help me with my problem. I have Windows 7 Home 64-bit. Whenever I try to upload a document (like an email attachment) I get the BSOD. It occurs when my document box pops up so I can select the document I want to attach. The box doesn't fully load - and BSOD. This occurs in email and other websites in Firefox, Chrome and Open... but not in IE for whatever reason. IE is ok. When troubleshooting, I attempted to read the dump files - but BSOD again. I do have the info when my computer reboots and I'm hoping someone can help me:

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 1033

Additional information about the problem:
BCCode: 1e
BCP1: FFFFFFFFC0000005
BCP2: FFFFF88007BBCC40
BCP3: 0000000000000000
BCP4: 0000000000000000
OS Version: 6_1_7601
Service Pack: 1_0
Product: 768_1

A:BSOD when trying to Upload Documents or Read Dump Files

Post it following the Blue Screen of Death (BSOD) Posting Instructions

Read other 9 answers
RELEVANCY SCORE 75.6

Got a BSOD and a .dmp file.

Thanks if anyone can take a look at it

Read other answers
RELEVANCY SCORE 68.8

Been getting BSOD's lately when playing games, doing motion graphics work, watching movies, etc. Pretty much anything that is graphics intensive. Most of them have been linked to a file called "cdd.dll" and the most recent one (an hour ago) was linked to "tcpip.sys" while some aren't linked to any particular file. On a couple of occasions I was getting video artifacts especially in After Effects before the crash. I'm starting to suspect I have a bad video card.

I ran a Memtest overnight that came back fine. I'm pretty sure my HDD is ok, my PSU is giving consistent voltages. I don't think my CPU is to blame as it runs everything (including blue screens).

For a bit of info I recently did a driver sweeper uninstall of my Nvidia display and PhysX drivers and installed a fresh copy of an older driver (as the newest has been giving me lots of problems). This hasn't done much to solve my problem.

Any ideas?

A:Dump files attached, would love somebody to look at them for me

  
Quote: Originally Posted by helpcomputa


Been getting BSOD's lately when playing games, doing motion graphics work, watching movies, etc. Pretty much anything that is graphics intensive. Most of them have been linked to a file called "cdd.dll" and the most recent one (an hour ago) was linked to "tcpip.sys" while some aren't linked to any particular file. On a couple of occasions I was getting video artifacts especially in After Effects before the crash. I'm starting to suspect I have a bad video card.

I ran a Memtest overnight that came back fine. I'm pretty sure my HDD is ok, my PSU is giving consistent voltages. I don't think my CPU is to blame as it runs everything (including blue screens).

For a bit of info I recently did a driver sweeper uninstall of my Nvidia display and PhysX drivers and installed a fresh copy of an older driver (as the newest has been giving me lots of problems). This hasn't done much to solve my problem.

Any ideas?


these were caused by two things. First your networking driver nvm62x32,sys (two years old) and your AVG AV

I would update the network driver and remove AVG and replace with Microsoft security essentials at least to test.

http://www.microsoft.com/security_essentials/

Read other 1 answers
RELEVANCY SCORE 68

Hi everyone. You guys solved my vista bluescreen errors several months ago - but now I have new ones.

I've tried debugging them myself...but i get nothing but symbol errors with windbg

As far as i know, nothing new has been installed lately...
and right now i only have two dump files from today.
 

Read other answers
RELEVANCY SCORE 67.6

BSODs, various messages. This is all post fresh install on a clean drive. Ran Memtest a couple of times, 7 passes each time, no errors. All drivers are most recent versions (as far as I know, I update regularly) Windows update is up to date. I found a bios update but haven't flashed it yet.
It seems to happen most often when I first fire up the computer, but sometimes randomly after that. Additional previous dumps can be found here : http://www.sevenforums.com/crashes-d...tall-win7.html

Here we go again. Ugh. Help?

A:BSOD (dump attached)

More dumps than staten island. Help?

Read other 8 answers
RELEVANCY SCORE 67.6

Please help with BSOD, DUMP attached

Thanks in advance,

L,

A:Please help with BSOD, DUMP attached

Hi liorlior.

All your latest BSODs are saying this:

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck C2, {7, 109b, 5090322, fffff8a016075230}

GetPointerFromAddress: unable to read from fffff80002ef7100
GetUlongFromAddress: unable to read from fffff80002ef71c0
Probably caused by : Ntfs.sys ( Ntfs!NtfsCommonCreate+257b )

Followup: MachineOwner
---------
Ntsf is the file system, on the HDD. So it is some issue with the disc subsystem.

Get rid of intel rapid storage. First uninstall it from Control Panel > Programs and Features. Then Uninstall the driver from device manager.
Right click on "my computer" icon and click "manage" on the context menu.
It will open the "computer management" window.
Select "Device Manager" in the left pane, It will list all the existing devices up.
Expand "IDE ATA/ATAPI controllers" by clicking on the triangle in front of it.
Select one Intel device item under it, right click, uninstall.
Continue the process for all Intel items under "IDE ATA/ATAPI controllers"... Read more

Read other 1 answers
RELEVANCY SCORE 67.2

Hello. I am experiencing some random BSODs. It happens no matter what program is running. It could be in a game, surfing the internet, or listening to music. It is very random. Happens about once every two days on average. Some days are worse.

I have tried running driver verifier, but it would still only bsod occasionally, except it would bsod on startup instead of being in the desktop and getting a bsod.

I have also ran memtest x86 a few times and found no errors.

My windows 7 is:
-x64 bit Professional Edition
-Original OS installed on my system (I built the system)
-Full retail.
-Built my system over the summer. Been getting occassional BSODs ever since.
-OS installation is about 4 months old.

And if this helps, My system parts are:
-Intel i7 860
-EVGA P55 LE motherboard (using onboard audio as well)
-EVGA gtx 470
-Adata G-Series DDR3 1600mhz ram (2x2gb)
-some low-end hitachi 750gb hard drive
-Thermaltake Toughpower XT 775 watt.

Yes I have installed all the latest drivers from all the manufaturers' websites.

I have also attached a BSOD dump and system health report.

Please and thank you for your help.

A:Random BSOD... Help please (BSOD dump & system health report attached)

Welcome to SF.

Like you indicated, you have the latest video driver.

However, your network and wireless network drivers need updating.

Marvell Yukon:
Driver c:\windows\system32\drivers\yk62x64.sys (11.10.6.3, 384.00 KB (393,216 bytes), 6/15/2009 2:10 AM)

D-Link Adapter:
Driver c:\windows\system32\drivers\athrx.sys (8.0.0.238, 1.47 MB (1,542,656 bytes), 10/5/2009 4:34 PM)






Quote:
Followup: memory_corruption
---------

4: kd> !analyze -v;r;kv;lmtn;lmtsmn
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

IRQL_NOT_LESS_OR_EQUAL (a)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high. This is usually
caused by drivers using improper addresses.
If a kernel debugger is available get the stack backtrace.
Arguments:
Arg1: 0000000000000024, memory referenced
Arg2: 000000000000000d, IRQL
Arg3: 0000000000000001, bitfield :
bit 0 : value 0 = read operation, 1 = write operation
bit 3 : value 0 = not an execute operation, 1 = execute operation (only on chips which support this level of status)
Arg4: fffff8000348856f, address which... Read more

Read other 7 answers
RELEVANCY SCORE 67.2

Hello,

I recently did a fresh install of Windows 8 on my HTPC. This machine is only used as a media center and therefor rather bare bones with no exotic software installed. With that said, I have configured it to sleep to conserve power. Every morning I seem to find a message indicating that the computer restarted unexpectedly. I have attached dump files to this post.

I'm so thankful for any help you can offer...

A:Computer is restarting unexpectedly - dump files attached

Symbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 8 Kernel Version 9200 MP (8 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 9200.16442.amd64fre.win8_gdr.121023-1503
Machine Name:
Kernel base = 0xfffff803`8946d000 PsLoadedModuleList = 0xfffff803`89737ae0
Debug session time: Fri Nov 23 12:37:47.092 2012 (UTC + 5:30)
System Uptime: 0 days 1:34:21.791
Loading Kernel Symbols
...............................................................
................................................................
............................
Loading User Symbols
Loading unloaded module list
...........
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
Use !analyze -v to get detailed debugging information.
BugCheck 9F, {3, fffffa80079c8060, fffff80389298920, fffffa8009469e10}
Probably caused by : pci.sys
Followup: MachineOwner
---------

*******************************************************************************
* *
* Bugcheck Analysis ... Read more

Read other 3 answers
RELEVANCY SCORE 66.8

HI all - i decide to replace my Pentium D with a Q6600 2.4 Ghz on windows 7 . For 20 mins it was fine then the first bsd - then another - re boot ok for 10 mins then another ....... so i re install windows just before desktop -bsd. Try ram sticks one by one but no good. Im sure there is no overheating - i updated the dell bios to 2.4.0 -i applied thermal paste. The main board Q6600 and 775socket are all compatiable - voltage is fine. ran mem test 5 times ok.
I feel that it has somthing to do with the driver i installed for the 8400GS card as i see some people using lap top drivers from different sites -
ANY HELP IS WELCOME

A:BSOD 124 code please help DUmp attached

  
Quote: Originally Posted by sepholdem


HI all - i decide to replace my Pentium D with a Q6600 2.4 Ghz on windows 7 . For 20 mins it was fine then the first bsd - then another - re boot ok for 10 mins then another ....... so i re install windows just before desktop -bsd. Try ram sticks one by one but no good. Im sure there is no overheating - i updated the dell bios to 2.4.0 -i applied thermal paste. The main board Q6600 and 775socket are all compatiable - voltage is fine. ran mem test 5 times ok.
I feel that it has somthing to do with the driver i installed for the 8400GS card as i see some people using lap top drivers from different sites -
ANY HELP IS WELCOME


Hello Welcome to SF,

Follow this article this should help you http://www.sevenforums.com/crash-loc...-what-try.html

Good Luck,
Captain

Read other 7 answers
RELEVANCY SCORE 66.8

i thought i got rid of the bsod by uninstalling zone alarm pro but it was fine till yesterday ..andf so i put in sygate and after 10 hours i got a bsod.i ran a memtest and after 8 tests it gave me a pass of 8 and errors 0..i also checked the hard drive..even that was fine...is there anything to do with symantec anti virus which i have.....
i have the last threee minidump files.
 

Read other answers
RELEVANCY SCORE 66.8

Good morning....

Is Windows 7 . . .
- x64
- the original installed OS on the system? Original
- an OEM or full retail version? OEM

- What is the age of system (hardware)? Purchased Spring, 2011
- What is the age of OS installation (have you re-installed the OS?) New hard drive, OS installed 1/2/12

A:BSOD dump archive attached

I believe the issue has to do with my video, as each BSOD occurred while either gaming or streaming video. If anyone could take a look and see if each BSOD has the same root cause I'd be grateful! Thanks!

Read other 4 answers
RELEVANCY SCORE 66.8

Hello, can someone please help me with the following BSOd analysis:

Instant Online Crash Analysis, brought to you by OSR Open Systems Resources, Inc.

Show DivPrimary Analysis

Crash Dump Analysis provided by OSR Open Systems Resources, Inc. (OSR Homepage - OSR)
Online Crash Dump Analysis Service
See OSR Online - The Home Page for Windows Driver Developers for more information
Windows 7 Kernel Version 7601 (Service Pack 1) MP (8 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 7601.18869.amd64fre.win7sp1_gdr.150525-0603
Machine Name:
Kernel base = 0xfffff800`0401b000 PsLoadedModuleList = 0xfffff800`04262730
Debug session time: Sat Jun 13 06:07:33.647 2015 (UTC - 4:00)
System Uptime: 0 days 1:34:05.427
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

KMODE_EXCEPTION_NOT_HANDLED (1e)
This is a very common bugcheck. Usually the exception address pinpoints
the driver/function that caused the problem. Always note this address
as well as the link date of the driver/image that contains this address.
Arguments:
Arg1: 0000000000000000, The exception code that was not handl... Read more

A:Help with BSOD, dump analysis attached

Please follow the instructions here: Blue Screen of Death (BSOD) Posting Instructions

Read other 3 answers
RELEVANCY SCORE 66.8

Hi,

I'm new here and I seem to can't bring myself to understand the log files. Can someone please have a short Layman's term explanation of what's wrong?

Thanks!

EDIT:
I was suspecting memory at first, so I used MemTest86. Ran 3 passes and no errors. I'm suspecting this could be one of the drivers triggering this.

A:IRQL_NOT_LESS_OR_EQUAL BSOD! Dump attached!

Enable driver Verifier and wait for another crash to happen. http://www.sysnative.com/forums/bsod...ows-vista.html


Code:
lvrs64.sys Tue Oct 23 04:11:24 2012 (5085FCCC)
Logitech Camera driver
http://www.carrona.org/drivers/driver.php?id=lvrs64.sys

lvuvc64.sys Tue Oct 23 04:12:08 2012 (5085FCF8)
Logitech USB Video Class Driver (WebCam)
http://www.carrona.org/drivers/driver.php?id=lvuvc64.sys

L1C63x64.sys Tue Jul 16 08:56:31 2013 (51E4EE9F)
Qualcomm Atheros AR8151 PCI-E Gigabit Ethernet Controller (NDIS 6.30)
http://www.carrona.org/drivers/driver.php?id=L1C63x64.sys

SYMEVENT64x86.SYS Sat Jul 27 04:26:58 2013 (51F32FF2)
Norton Internet Security
http://www.carrona.org/drivers/driver.php?id=SYMEVENT64x86.SYS

SYMDS64.SYS Wed Jul 31 01:29:08 2013 (51F84C44)
Symantec/ Norton NIS/ N360 driver
http://www.carrona.org/drivers/driver.php?id=SYMDS64.SYS

intelppm.sys Thu Aug 22 10:46:35 2013 (5215CFEB)
Intel Processor driver
http://www.carrona.org/drivers/driver.php?id=intelppm.sys

ccSetx64.sys Tue Sep 24 05:58:04 2013 (52410DCC)
Symantec/ Norton Common Client Settings Driver
http://www.carrona.org/drivers/driver.php?id=ccSetx64.sys

SYMNETS.SYS Thu Feb 13 12:25:14 2014 (52FCAB9A)
Symantec/ Norton NIS/ N360 driver
http://www.carrona.org/drivers/driver.php?id=SYMNETS.SYS

SYMEFA64.SYS Fri Feb 28 00:32:07 2014 (530FCAF7)
Symantec Extended File Attributes
http://www.carrona.org/drivers/driver.php?id=SYMEFA64.SYS

avmu364.sys Thu Mar 27 06:49:33 ... Read more

Read other 6 answers
RELEVANCY SCORE 66.8

Hi, Im new to win8. Today I got a bsod... I'm attaching the dump file.. Plz help..

Thanks...

A:New BSOD... Crash Dump attached.. help...

No Windows Updates installed. Most systems have at least 30 or 40. Please visit Windows Update and get ALL available updates (it may take several trips to get them all).

Daemon Tools (and Alcohol % software) are known to cause BSOD's on some Win7 systems (mostly due to the sptd.sys driver, although I have seen dtsoftbus01.sys blamed on several occasions). I strongly suspect that this hold true for Win8 systems also.





Please un-install the program, then use the following free tool to ensure that the troublesome sptd.sys driver is removed from your system (pick the 32 or 64 bit system depending on your system's configuration): [S] DuplexSecure - FAQ [/S] Link broken as of 21 Jul 2012
New link (15 Aug 2012): DuplexSecure - Downloads (pick the appropriate version for your system and select "Un-install" when you run it).
Alternate link: Disc-Tools.com
Manual procedure here: Registry and SPTD problems | DAEMON Pro Help



Your BIOS dates from 2011. Please check at the manufacturer's website to see if there are any BIOS updates available for your system. Also check the readme file to see if they apply to the problems that you are having. Please be advised that flashing the BIOS is a very unforgiving process - and one mistake can physically damage your motherboard.

Cyberlink drivers date from 2010 - please uninstall the program.

Please update these older drivers. Links are included to assist in looking up the source of the drivers... Read more

Read other 6 answers
RELEVANCY SCORE 66.8

Hi Everyone,

Attached you can find my latest 3 dump files.

I've been dealing with the problem for awhile now and I'm hoping someone on here will be kind enough to help me out.

I get a random BSOD every so often (about one a day). It doesn't matter what I am doing. I can be either playing a game or doing nothing and the computer will BSOD for whatever reason.

I've done memory checks and the RAM seems to be fine.

Also, here is the output from WinDbg for my last crash dump:






Quote:

Loading Dump File [C:\Windows\Minidump\041810-17015-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available
Symbol search path is: SRV*c:\symbols*Symbol information
Executable search path is:
Windows 7 Kernel Version 7600 MP (8 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 7600.16539.amd64fre.win7_gdr.100226-1909
Machine Name:
Kernel base = 0xfffff800`02a4d000 PsLoadedModuleList = 0xfffff800`02c8ae50
Debug session time: Sun Apr 18 03:08:53.812 2010 (UTC - 7:00)
System Uptime: 0 days 5:14:18.069
Loading Kernel Symbols
...............................................................
................................................................
...........................
Loading User Symbols
Loading unloaded module list
...........
*******************************************************************************
* *
* Bugcheck Analysis *
* *
********************************************************************... Read more

A:Frequest BSOD Dump Attached

Ugh, it just happened again.

Read other 8 answers
RELEVANCY SCORE 66.8

HI all - i decide to replace my Pentium D with a Q6600 2.4 Ghz on windows 7 . For 20 mins it was fine then the first bsd - then another - re boot ok for 10 mins then another ....... so i re install windows just before desktop -bsd. Try ram sticks one by one but no good. Im sure there is no overheating - i updated the dell bios to 2.4.0 -i applied thermal paste. The main board Q6600 and 775socket are all compatiable - could it have somthing to do with grapic card or sound card ? Im lost Any ideas greatly appriciated - info--
BC code 124 124 124
BCP1 00000000 00000000 00000000
BCP2 85CB001C 861C58FC 86DD2024
BCP3 B2000000 00000000 00000000
BCP4 00000800 00000000 00000000
THATS THE 3 LOGS I RECORDED
I have a g force 8400 gs - 3 gigs of ram
I saved a memory dump folder but it is 46mb so i have upoaded to RS RapidShare: 1-CLICK Web hosting - Easy Filehosting thanks in advace for any help

A:Bsod code 124 dump attached

  
Quote: Originally Posted by sepholdem


HI all - i decide to replace my Pentium D with a Q6600 2.4 Ghz on windows 7 . For 20 mins it was fine then the first bsd - then another - re boot ok for 10 mins then another ....... so i re install windows just before desktop -bsd. Try ram sticks one by one but no good. Im sure there is no overheating - i updated the dell bios to 2.4.0 -i applied thermal paste. The main board Q6600 and 775socket are all compatiable - could it have somthing to do with grapic card or sound card ? Im lost Any ideas greatly appriciated - info--
BC code 124 124 124
BCP1 00000000 00000000 00000000
BCP2 85CB001C 861C58FC 86DD2024
BCP3 B2000000 00000000 00000000
BCP4 00000800 00000000 00000000
THATS THE 3 LOGS I RECORDED
I have a g force 8400 gs - 3 gigs of ram
I saved a memory dump folder but it is 46mb so i have upoaded to RS RapidShare: 1-CLICK Web hosting - Easy Filehosting thanks in advace for any help



Hi and welcome

The DMP file on RS is corrupt. Use these too help and fix your problem. http://www.sevenforums.com/crash-loc...-what-try.html

Let us know the result]

Ken

Read other 1 answers
RELEVANCY SCORE 66.8

I keep getting a BSOD on my laptop and it stays for about a second and then the system restarts.

can some one please identify the problem, I have attached the .dmp and the .xml file along with a .txt file

Thankyou

A:BSOD - Dump file attached

Hi there!It is rather hard to read a DUMP file and a long XML file. Next time, please paraphrase the text that you saw from the error message and write down the error number and display it here! It was not impossible to read the file. I found some information to help you.From what I read, you have a Dell laptop with an Intel Pentium M Processor 1.6 GHz, right? (Developer info: Model 13 Stepping 8)Now from what I saw:*** STOP: 0x0000009C (0x00000003,0x80545FF0,0xB2000000,0x0002010A)"MACHINE_CHECK_EXCEPTION" -- happens when processors report uncertain information to the system log.Microsoft Support: Error article 0x9CMicrosoft Support: Understanding and troubleshooting 0x0000009C errorsHelp from Microsoft on troubleshooting errors in hardware/softwareThis error is uncommon, and happens rarely. I have tried many times to help get a resolution from my database, but there is no information in the database.NEW RESOLUTION FOR ERROR 0x0000009C-Make sure your drivers are up to date.-Turn off or unplug external hardware before shutting down or restarting your computer. (DEP)-Make sure you have 256 MB RAM or more installed on your computer.Please tell me if you need any help with the resolution!

Read other 15 answers
RELEVANCY SCORE 66.8

Hey folks,
My machine is blue screening daily. could someone read the dump file for me to help track down the culprit of the issue? I have attached the dump. thanks for the help!

A:Daily BSOD (dump attached)

BSOD caused by the Intel network card device driver
Update it in safemode with networking Intel? Driver Update Utility


Code:
BugCheck 9F, {3, fffffa80079e1a20, fffff80000ba2748, fffffa800d0d4590}

*** WARNING: Unable to verify timestamp for e1k62x64.sys
*** ERROR: Module load completed but symbols could not be loaded for e1k62x64.sys
Probably caused by : e1k62x64.sys

Read other 1 answers
RELEVANCY SCORE 66.8

A new BSOD, wonder whatever could be wrong this time...I just clicked a link on Firefox to watch a Youtube video when it happened.

A:New BSOD Dump file attached

Dump reports error code 0x50 BSOD Index bit of info/causes for you

I would run memtest to check ram Memtest86+ - Advanced Memory Diagnostic Tool
HDD diagnostic HD Diagnostic
System file scan, start>cmd.exe>right click run as admin>type sfc /scannow
Check bios is upto date
If necessary remove AV

Found this old driver on your system
RTCore64.sys Wed May 25 07:39:12 2005, i would update it or remove it, i think it is either part of EVGA Exclusive Precision Overclocking tool/utility or a part of Riva Tuner software

Hope this helps


P.S. If you have anymore problems or BSODs please post back to the same thread and not a new one

Read other 1 answers
RELEVANCY SCORE 66.8

hello all,

I have installed fresh liggle copy of windows 7 ultimate * 32bit, few

days ago.

tonight with not any change from my side, i begam to get BSOD

randomly.
then the computer rebbots and i'm getting black screen with only the

mouse course moving.

when i log in safe mode - evrything is ok. and then it let me log

normal again until next BSOD.
one of the dump file is attaced.

thanks anyone in adanve for reading and helping about this issue.

A:BSOD problem - dump is attached

  
Quote: Originally Posted by nimrodb


hello all,

I have installed fresh liggle copy of windows 7 ultimate * 32bit, few

days ago.



tonight with not any change from my side, i begam to get BSOD

randomly.
then the computer rebbots and i'm getting black screen with only the

mouse course moving.

when i log in safe mode - evrything is ok. and then it let me log

normal again until next BSOD.
one of the dump file is attaced.

thanks anyone in adanve for reading and helping about this issue.


Hello !! Welcome to SF !!

I don't see the Dump file attachment please attach it again !!

- Captain

Read other 5 answers
RELEVANCY SCORE 66.8

EDIT 9/6/10

Thanks for the help guys. I found out the problem and my machine is faster than ever booting up and loading now. It was my power supply that was crapping out on me. I had an exact same model I bought about 1 1/2 years ago and I compared the two and the newer one I had was so crappy, they changed the quality over the years. It was lighter and the wires felt cheap, no wonder it went from 60 to 29.99 :[ oh well thanks though guys.

A:BSOD, Mini Dump Attached. Help?

Hi and Welcome back!

The results from the DMP files do not give a definitive answer. While we investigate further here are a few things that you can do.

1-Run a system file check to verify and repair you system files. You do this by typing cmd in search, then right click and run as admin. SFC /SCANNOW

2. I still suggest that this somehow still related to RAM issue, or bad mobo, but let's get to that later.

3-Event viewer
Go into event viewer (type eventvwr in search). Go to the windows log>application tab.

You want to look for critical errors (they have red in the left column ).

When you find them you want to look for critical errors that say app hang, app crash, or anything that relates to the problem.

When you find them please note the event ID, and the source codes and tell us what they are.

4-Device manager
Please go to start>search>type device manager.
Are there any "unknown devices" with yellow triangles on them?
Is you driver there , listed, and working?

If y our driver is missing, or there is a yellow triangle on it, you will need to update it.

5-Driver verifier
please run Verifier with these settings:





Quote:
Using Driver Verifier is an iffy proposition. Most times it'll crash and it'll tell you what the driver is. But sometimes it'll crash and won't tell you the driver. Other times it'll crash before you can log in to Windows. If you can't get to Safe Mode, then you'll have to resort to offline editing of the regi... Read more

Read other 9 answers