Over 1 million tech questions and answers.

BSOD Occurs At Random Intervals While Browsing (Firefox)

Q: BSOD Occurs At Random Intervals While Browsing (Firefox)

The crashes are completely random.
The computer does not appear to be under any significant strain.
Two have occurred thus far.
Attached are requested files.
Thank you.

RELEVANCY SCORE 200
Preferred Solution: BSOD Occurs At Random Intervals While Browsing (Firefox)

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: BSOD Occurs At Random Intervals While Browsing (Firefox)

Please enable driver verifier and allow it to crash your system, once it has crashed disable driver verifier and post back here with your new files the same way you posted the first time.

Driver Verifier - Enable and Disable

Tip: If you can not boot normally after enabling driver verifier boot into safe mode and then disabling driver verifier.

Read other 9 answers
RELEVANCY SCORE 91.6

I recently essentially built a new computer (old case and old ssd+hdd, everything else new) and have been getting BSODs. I did the build around a month ago and got a couple BSODs less than a week later but they stopped so it seemed fine. However, the past couple of days, I have been getting them again, and more frequently. They are mostly MACHINE_CHECK_EXCEPTION, at least one was SYSTEM_SERVICE_EXCEPTION. They happen usually while using Chrome or playing Overwatch, but have happened while doing other things as well, including using various programs such as Speccy trying to figure out what was going on.

CPU: Intel i5-6600k
GPU: Sapphire Nitro+ RX 480
MB: ASUS Z170-AR
RAM: HyperX Fury 16GB (2 x 8GB)
PSU: EVGA 650 GQ

I have attached my DM Log Collector zip.

Read other answers
RELEVANCY SCORE 84.4

Hello all,
I hope you all are well, I've been having issues with this computer and I'm not quite too sure what the issue is, I'm trying to post this quickly before I have another BSOD lol. I will edit it later and include more information such as specific hardware components. Thank you for your time and patience!

System specs:

Computer type : PC/Desktop
Computer Manufacturer/Model : Custom built
OS : Windows Ultimate x64
CPU :Intel Core i5-660 Clarkdale 3.33GHz LGA 1156 BX80616I5660
Motherboard : Asus P7p55-Pro
Memory : G.SKILL 6 GB (3x 2GB) 240-Pin DDR3 SDRAM DDR3 1600
Graphics Card :EVGA GeForce 9500 GT 1GB PCIe w/Dual Link DVI
Hard Drives:
WD Caviar 640GB Serial ATA HD 7200/16MB/SATA-3G

A:Multiple BSODs (Occurs at start-up or random intervals) unknown errors

It is a stop ox1. As far as I have noticed, it is caused mostly by the third party antivirus programs. And it appears to be the same for you, too.

Some of your subsequent crash dumps are also indicating to the same observation, directly and/or indirectly.

Klif Mini-Filter fre_wnet_x86 (Kaspersky) is the failing module here.

Code:
fffff880`08f16398 fffff880`0463ef0fUnable to load image \SystemRoot\system32\DRIVERS\klif.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for klif.sys
*** ERROR: Module load completed but symbols could not be loaded for klif.sys
klif+0x36f0f
-------------------------------------------------------------------------------
BugCheck 19, {3, fffff8a010145500, fffff8a010145500, 41006e00690057}

*** WARNING: Unable to verify timestamp for klif.sys
*** ERROR: Module load completed but symbols could not be loaded for klif.sys
Probably caused by : Pool_Corruption ( nt!ExDeferredFreePool+cbb )

Followup: Pool_corruption
Description here: Driver Reference Table - klif.sys

Uninstall Kaspersky using Kaspersky Removal Tool. Use Microsoft Security Essentials as your antivirus with windows inbuilt firewall, and free MBAM as the on demand scanner.
Download, install and update those, and then run full system scans with both of them, one by one.

Never use multiple AV programs. It is really not a good practice. Uninstall McAfee.
Start Menu\Programs\McAfee Security Scan Plus
Free up the startup. Windows does not need any other program to au... Read more

Read other 9 answers
RELEVANCY SCORE 77.6

Hello. I've been getting BSOD, sometimes a few in a hour, or othertimes I wouldn't get one the whole day. I might even get the BSOD a few minutes after restarting. Mostly its been while I'm browsing, and sometimes when I'm away from the computer doing nothing. Attached zip. Any help would be appreciated. Thanks.

Attachment 341411

A:Random BSOD - mostly while browsing IE, FireFox

Ran Memtest found on this site and quickly encountered error. Tried suspect RAM on another slot and still error. Thank you for those who have read my post seeking help.

Read other 1 answers
RELEVANCY SCORE 77.2

Hi,

I posted about this issue last night, but there seems to have been a problem with the forum and my thread got deleted some how. Britton30 was giving me a hand, but I thought I'd repost my issue.

My computer has been randomly freezing about every 2 or 3 days (no BSOD). When it freezes there is no activity on the HDD light, and everything just locks up. It has happened while browsing (both Firefox and Chrome), while gaming, and while working in Maya 2011. I recently wiped my hard drive (using Derik's Boot n' Nuke) and reloaded Windows. I ran into an issue validating it because I forgot I had changed my video card. I called Microsoft and they got it all figured out for me. I reloaded all everything onto my computer without any problems.

I thought the freeze might have been caused for some reason by Steam, so I reloaded that. When my computer continued to freeze I updated my GPU drivers (wiping the old ones with Driver Sweeper). My computer is set up to run a weekly sweep with AVG free and Malwarebytes, and I regularly scan with Spybot.

Britton30 had me check my HDD with the Western Digital Data Lifeguard program, and after a full scan everything checked out. Over night I ran a memory test with memtest86+ (8 full passes), and that returned no errors.

My system specs:
OS: Windows 7 Professional
CPU: AMD Phenom II x6 1050
MoBo: Gigabyte GA-690FXA-UD5
GPU: HD 6050 (shaders are unlocked, but I did that way before reloading everything without any issues).
HD... Read more

A:Random freeze (occurs while browsing, gaming, and using Maya).

I thought I would go ahead and give an update on this issue. I just hit this same issue again while watching a flash video in Firefox. I'm still unsure of the cause.

Read other 6 answers
RELEVANCY SCORE 74

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 4105

Additional information about the problem:
BCCode: a
BCP1: 0000000000000000
BCP2: 0000000000000002
BCP3: 0000000000000001
BCP4: FFFFF800032D1F2C
OS Version: 6_1_7601
Service Pack: 1_0
Product: 768_1

Files that help describe the problem:
C:\Windows\Minidump\082412-45458-01.dmp
C:\Users\Owner\AppData\Local\Temp\WER-89794-0.sysdata.xml


Please help, I really don't know how to fix this LOL, happens every once in a while

A:BSOD while browsing, occurs every once in 2 weeks or so

Every one of your dumps blames scmndisp.sys - Netgear Neutral Wireless Solution

Driver Reference Table - scmndisp.sys

Take a look for updated drivers/software for any netgear equipment you have.

Read other 1 answers
RELEVANCY SCORE 73.2

I don't really know much about computers, I bought a new one only a few months ago and I keep getting this Worker Thread at bad IRQL problem. Occurs maybe once a week or so. I did the crash dump thing. Please help.

Thanks

Rhian

A:BSOD occurs while just browsing/word processing

Welcome.

Please upload your msinfo32.nfo file. To get this: Start Menu -> Type msinfo32 into the Search programs and files box -> When it opens, go to File, Save -> Save as msinfo32.nfo and save in a place you will remember -> Let it finish the process of gathering and saving the system info -> Right click the .nfo file, click send to compressed (zipped) folder -> Upload the .zip file here.

Please upload your msinfo32.txt file. To get this: Start Menu -> Type msinfo32 into the Search programs and files box -> When it opens, go to File, Export -> Save as msinfo32.txt and save in a place you will remember -> Let it finish the process of gathering and saving the system info -> Right click the .txt file, click send to compressed (zipped) folder -> Upload the .zip file here.

BCC E1 is common when McAfee is present.

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck E1, {fffff800039cf560, 2, fffffa8009d4f470, fffffa8009d4f470}

Probably caused by : ntkrnlmp.exe ( nt!IopProcessWorkItem+0 )

WORKER_THREAD_RET... Read more

Read other 9 answers
RELEVANCY SCORE 71.6

Originally this problem occurred when I played League of Legends ONLY.

I reformatted my HD and installed a fresh copy of Windows 7 Professional 64 Bit (upgraded from Windows Vista)

Now I get BSOD NON STOP. It is so aggravating.

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.256.48
Locale ID: 1033

Additional information about the problem:
BCCode: 116
BCP1: FFFFFA8003EB6010
BCP2: FFFFF88002C08E6C
BCP3: FFFFFFFFC0000001
BCP4: 0000000000000003
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\072912-24625-01.dmp
C:\Users\Chris\AppData\Local\Temp\WER-47343-0.sysdata.xml

Read our privacy statement online:
Windows 7 Privacy Statement - Microsoft Windows

If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

This is the error I receive. Also the attachment includes System Info, Minidump, and Driver files using the SF Diagnostic Tool.

Comp Specs:
CPU - Intel Core 2 Duo E7200 Wolfdale ~2.53 ghz
Mobo - Intel DP35DP
RAM - 2GB Kingston PC2-6400 (400 MHz) x2 [4GB Total]
GPU - Radeon HD 4830
Power Supply - Antec 650W
HD - 1 x Seagate Barracuda 7200.10 ST3250410AS 250GB 7200 RPM SATA 3.0Gb/s 3.5" Internal Hard Drive -Bare Drive

Literally encountered 5 BSoD's (SAME ERROR) while making this post!!!!!!! Help!!!!

A:BSoD Windows 7 Pro [From Internet Browsing to Gaming] Occurs Randomly

I've had a look at dumps and quite a few are blaming atikmdag.sys - ATI Video Driver

Driver Reference Table - atikmdag.sys

Have a look if you can find a newer version and see how you get on, if that doesn't work please post back on one of the BSOD analysts may be able to help further.

Read other 5 answers
RELEVANCY SCORE 71.6

Hi there,

I am getting random BSODs with my Acer Aspire 8943G laptop. I was wondering if someone can help out and shed some light as to what might be causing it.
I am not doing anything extraordinary with this laptop but use Firefox 7.0.1 for web browsing, Office 2010 with latest updates for e-mail / productivity.
The laptop is running the Win 7 OS that came with it (Home Premium 64bit).
It's an i5-430m, 2.26Ghz per core.
ATI Mobility Radeon HD 5650
8GB of DDR3 ram.

I've been experiencing these type of BSOD pretty much from day one, and they can occur from as often as several times a week to maybe once a month.

Thanks so much,

x56h34

---

Is Windows 7 . . .
- x86 (32-bit) or x64 ? x64
- the original installed OS on the system? Yes
- an OEM or full retail version? OEM
- OEM = came pre-installed on system
- Full Retail = you purchased it from retailer

- What is the age of system (hardware)? 1-2 years old
- What is the age of OS installation (have you re-installed the OS?) 1-2 years, original installation

A:BSOD occurs randomly during regular usage (web-browsing, e-mail).

Dumps point to netw5s64.sys, Intel Wifi driver
Update it using update utility: Intel? Driver Update Utility or at Acer Support
Acer Europe - Service & Support, Drivers & Utilities, Downloads


Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 9F, {3, fffffa8007fdf060, fffff80004610518, fffffa800dfa4380}

*** WARNING: Unable to verify timestamp for NETw5s64.sys
*** ERROR: Module load completed but symbols could not be loaded for NETw5s64.sys
Probably caused by : NETw5s64.sys
DRIVER_POWER_STATE_FAILURE (9f)
A driver is causing an inconsistent power state.
Arguments:
Arg1: 0000000000000003, A device object has been blocking an Irp for too long a time
Arg2: fffffa8007fdf060, Physical Device Object of the stack
Arg3: fffff80004610518, Functional Device Object of the stack
Arg4: fffffa800dfa4380, The blocked IRP

Debugging Details:
------------------
DRVPOWERSTATE_SUBCODE: 3

IRP_ADDRESS: fffffa800dfa4380

DEVICE_OBJECT: fffffa800a911050

DRIVER_OBJECT: fffffa800a94f8f0

IMAGE_NAME: NETw5s64.sys

DEBUG_FLR_IMAGE_TIMESTAMP: 4b4df6b9

MODULE_NAME: NE... Read more

Read other 3 answers
RELEVANCY SCORE 68.4

Hello everyone,

Randomly I will receive a BSOD. It doesn't happen after I do anything specific.
I think it might be because of my programs. Some are 32x, and I am running 64x.
I have ran memory tests and they all come back without a problem.
So far I have received: Bad_Pool_Header, Memory_Management, and System_Service_Exception.
I mainly run IE8 , Mozilla, Trillian, MSN Messenger, Word 2007, Excel 2007, Symantec, iTunes, and Outlook 2007.

Anyone one care to help me? This is creating a major problem.

Ask me what you need to know, and I will try and supply an answer.
Thank you in advance.

------------------
System Information
------------------

Time of this report: 4/26/2010, 13:14:14

Operating System: Windows 7 Ultimate 64-bit (6.1, Build 7600) (7600.win7_gdr.100226-1909)
System Manufacturer: Gigabyte Technology Co., Ltd.
System Model: EP45T-UD3LR
BIOS: Award Modular BIOS v6.00PG
Processor: Intel(R) Core(TM)2 Duo CPU E8500 @ 3.16GHz (2 CPUs), ~2.8GHz
Memory: 8192MB RAM
Available OS Memory: 8190MB RAM
Page File: 1396MB used, 14984MB available

A:BSOD at random intervals . . .

  
Quote: Originally Posted by Becca


Hello everyone,

Randomly I will receive a BSOD. It doesn't happen after I do anything specific.
I think it might be because of my programs. Some are 32x, and I am running 64x.
I have ran memory tests and they all come back without a problem.
So far I have received: Bad_Pool_Header, Memory_Management, and System_Service_Exception.
I mainly run IE8 , Mozilla, Trillian, MSN Messenger, Word 2007, Excel 2007, Symantec, iTunes, and Outlook 2007.

Anyone one care to help me? This is creating a major problem.

Ask me what you need to know, and I will try and supply an answer.
Thank you in advance.

------------------
System Information
------------------

Time of this report: 4/26/2010, 13:14:14

Operating System: Windows 7 Ultimate 64-bit (6.1, Build 7600) (7600.win7_gdr.100226-1909)
System Manufacturer: Gigabyte Technology Co., Ltd.
System Model: EP45T-UD3LR
BIOS: Award Modular BIOS v6.00PG
Processor: Intel(R) Core(TM)2 Duo CPU E8500 @ 3.16GHz (2 CPUs), ~2.8GHz
Memory: 8192MB RAM
Available OS Memory: 8190MB RAM
Page File: 1396MB used, 14984MB available


We need the actual DMP file. use these to find and upload i t. http://www.sevenforums.com/crash-loc...d-problem.html
thanks

Ken

Read other 9 answers
RELEVANCY SCORE 68.4

Hi All,

I started have this problem while using normally my PC after a installation of Windows 7 Home Premium Edition.

The PC makes BSOD during normal operations: browsing, installing Program, or download upgrade for Windows.

Here attached my Dumps Files.

Thanks in advance for your help,

bye

A:BSOD at random intervals while using my PC

The PC makes BSOD during normal operations: browsing, installing Program, or download upgrade for Windows.

Read other 2 answers
RELEVANCY SCORE 68.4

Hi all,

I'm trying to troubleshoot a BSOD error that happens randomly. However, I've tried looking into this and I'm really bad at it. I'm hoping I could get some help.

Here's the problem information

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.0.6002.2.2.0.768.3
Locale ID: 1033

Additional information about the problem:
BCCode: 1000008e
BCP1: C0000005
BCP2: 9C724370
BCP3: 8FE41AE0
BCP4: 00000000
OS Version: 6_0_6002
Service Pack: 2_0
Product: 768_1

I'm not sure if it's related, but I've also been unable to install some windows updates (error code 643). I tried applying the solution here, but it didn't work: When you try to install an update for the .NET Framework 1.0, 1.1, 2.0, 3.0, or 3.5, you may receive Windows Update error code "0x643" or Windows Installer error code "1603"

I would appreciate any and all help.

Thanks in advance!

A:BSOD at Random Intervals

Update, I received one a few hours later:

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.0.6002.2.2.0.768.3
Locale ID: 1033

Additional information about the problem:
BCCode: 7a
BCP1: C058C3F8
BCP2: C00000B5
BCP3: 1C610860
BCP4: B187FA11
OS Version: 6_0_6002
Service Pack: 2_0
Product: 768_1

Files that help describe the problem:
C:\Windows\Minidump\Mini082311-02.dmp
C:\Users\Nick\AppData\Local\Temp\WER-629120-0.sysdata.xml
C:\Users\Nick\AppData\Local\Temp\WER88FD.tmp.version.txt

Read our privacy statement:
Microsoft Online Crash Analysis

Read other 2 answers
RELEVANCY SCORE 68.4

Hey again,

Currently have a new BSoD.. Oh the fun of it all :P Random intervals

Win 7 Ultimate 64bit

bsod driver_irql_not_less_or_equal

The computer has rebooted from a bugcheck. The bugcheck was: 0x000000d1 (0x0000000000000008, 0x0000000000000002, 0x0000000000000001, 0xfffff880082bb2e6).

Attached is the mini dump.

Cheers

A:BSoD random intervals

  
Quote: Originally Posted by mattikinsmatt


Hey again,

Currently have a new BSoD.. Oh the fun of it all :P Random intervals

Win 7 Ultimate 64bit

bsod driver_irql_not_less_or_equal

The computer has rebooted from a bugcheck. The bugcheck was: 0x000000d1 (0x0000000000000008, 0x0000000000000002, 0x0000000000000001, 0xfffff880082bb2e6).

Attached is the mini dump.

Cheers



Related to Rt64win7.sys 8101E/8168/8169 NDIS 6.20 64-bit Driver from Realtek Corporation. I would re-install with newest driver avail.

Read other 1 answers
RELEVANCY SCORE 68.4

I just recently got new parts for my computer and installed two solid state drives raid zero'd and a new processor fan. I've been getting the BSOD ever since and it would occur at random intervals.

A:BSOD at Random Intervals

Welcome aboard.

The zip uploaded does not contain any crash dump.

Dump Files - Configure Windows to Create on BSOD

Follow it manually in the default path: C:\Windows\Minidump or %SystemRoot%\Minidump.

Upload it at next system crash, following the Blue Screen of Death (BSOD) Posting Instructions.

Read other 1 answers
RELEVANCY SCORE 68.4

I tend to randomly have BSOD's. I could be idle overnight and it'll do it, or in the middle of gaming. Before it wasn't a problem, it would happen once in a blue moon, but lately the BSOD's have gotten more frequent. Below is a copy of the error I get once it reboots






Quote:
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 4105

Additional information about the problem:
BCCode: 1000007e
BCP1: FFFFFFFFC0000005
BCP2: FFFFF88009399088
BCP3: FFFFF88006EEB9D8
BCP4: FFFFF88006EEB230
OS Version: 6_1_7601
Service Pack: 1_0
Product: 768_1

Files that help describe the problem:
C:\Windows\Minidump\081812-21824-01.dmp
C:\Users\Cupcake\AppData\Local\Temp\WER-46269-0.sysdata.xml


I've also attached both the seven forums .zip and a .zip with the sysdata and .dmp file that BSOD points to. Any help would be appreciated.

A:BSOD at random intervals

Hello there!

Seems like the crashes are caused by lvrs64.sys i.e. Logitech Camera driver. Remove the existing drivers and download a new copy and install it. Logitech - Support & Software Downloads
BSOD BUGCHECK SUMMARY


Code:

Loading Dump File [C:\Documents and Settings\Shyam\_jcgriff2_\dbug\__Kernel__\081812-21824-01.dmp]
Built by: 7601.17835.amd64fre.win7sp1_gdr.120503-2030
Debug session time: Sun Aug 19 06:01:05.617 2012 (GMT+6)
System Uptime: 1 days 0:41:09.631
*** WARNING: Unable to verify timestamp for lvrs64.sys
*** ERROR: Module load completed but symbols could not be loaded for lvrs64.sys
BugCheck 1000007E, {ffffffffc0000005, fffff88009399088, fffff88006eeb9d8, fffff88006eeb230}
Probably caused by : lvrs64.sys ( lvrs64+e088 )
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
PROCESS_NAME: System
BUGCHECK_STR: 0x7E
FAILURE_BUCKET_ID: X64_0x7E_lvrs64+e088
Bugcheck code 1000007E
Arguments ffffffff`c0000005 fffff880`09399088 fffff880`06eeb9d8 fffff880`06eeb230
BiosVersion = A15
BiosReleaseDate = 02/04/2010
SystemManufacturer = DELL Inc.
SystemProductName = Studio XPS 435T/9000
MaxSpeed: 2670
CurrentSpeed: 2660
??????????????????????????????????????????????????????????????????????????????????????``
Loading Dump File [C:\Documents and Settings\Shyam\_jcgriff2_\dbug\__Kernel__\081712-22152-01.dmp]
Built by: 7601.17835.amd64fre.win7sp1_gdr.120503-2030
Debug session time: Fri Aug 17 16:38:01.027 2012 (GMT+5)
System Uptime: 0 days 6:48:33.041
*** WARNING: Unable to v... Read more

Read other 5 answers
RELEVANCY SCORE 68.4

Hi There,

Keep getting the BSOD at random intervals not when starting any specific programs. Getting worse and worse recently though - already had 3 today.

Windows 7 Home 64bit OEM.
Toshiba Satellite P750 bought around 8 months ago.
NVIDIA GeForce GT 540M

Running Eset NOD32 Antivirus 4.2.58.3


Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 2057

Additional information about the problem:
BCCode: d1
BCP1: 0000000000000029
BCP2: 0000000000000002
BCP3: 0000000000000000
BCP4: FFFFF8800725433B
OS Version: 6_1_7601
Service Pack: 1_0
Product: 768_1

Files that help describe the problem:
C:\Windows\Minidump\062312-19936-01.dmp
C:\Users\Richard\AppData\Local\Temp\WER-49795-0.sysdata.xml

Read our privacy statement online:
Windows 7 Privacy Statement - Microsoft Windows

If the online privacy statement is not available, please read our privacy statement offline:
C:\windows\system32\en-US\erofflps.txt




Thanks for any help.

A:BSOD at Random Intervals

Crashes point to your ESET software. Remove the software via the ESET uninstall tool. Download a fresh copy of the 2012 version; yours is a version behind and probably causing conflicts for that reason. Install the 2012 version 5 ESET software.

Read other 1 answers
RELEVANCY SCORE 68.4

Hi all,

First time poster, long time listener.

I started having BSODs about a week ago. They seem to happen randomly, even when I'm not at my computer doing anything. They first started after I attempted to install drivers for my Samsung Galaxy SIII, though I don't necessarily know there is a correlation. Things I've done:

1) Ran a boot-time virus scan using Avast! free antivirus. There were 3 corrupted zip files, but they had been on the computer for a long while, so I thought nothing of it.

2) Ran a full scan using Malware Bytes... clean.

3) Ran a full checkdisk. Clean.

4) Ran the built-in HP memory, HD, and CPU testing software. Clean.

5) Tried to use system restore, but says there are no restore points available (!).

Any help you can give would be greatly appreciated! Thanks! I've attached the requested .zip, as well.

Tony

A:BSOD at random intervals

Welcome to the forum Toekneetwo,

Code:
Built by: 7601.18409.amd64fre.win7sp1_gdr.140303-2144
Debug session time: Sun May 25 20:07:55.684 2014 (UTC + 6:00)
System Uptime: 1 days 15:32:50.730
BugCheck 7A, {fffff6fb80000000, ffffffffc0000185, 83eba880, fffff70000000000}
Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+36c1a )
BUGCHECK_STR: 0x7a_c0000185
PROCESS_NAME: itype.exe
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7601.18409.amd64fre.win7sp1_gdr.140303-2144
Debug session time: Sat May 24 04:34:44.590 2014 (UTC + 6:00)
System Uptime: 0 days 0:16:52.011
BugCheck 7A, {fffff6fc40025ff0, ffffffffc0000185, 3395fbe0, fffff88004bfe000}
Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+36c1a )
BUGCHECK_STR: 0x7a_c0000185
PROCESS_NAME: System
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7601.18409.amd64fre.win7sp1_gdr.140303-2144
Debug session time: Fri May 23 03:37:51.583 2014 (UTC + 6:00)
System Uptime: 1 days 0:52:52.004
BugCheck 7A, {fffff6fb800083f8, ffffffffc0000185, 85cb880, fffff7000107fff8}
Probably caused by : volsnap.sys ( volsnap+28649 )
BUGCHECK_STR: 0x7a_c0000185
PROCESS_NAME: System
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7601.18409.amd64fre.win7sp1_gdr.140303-2144
Debug session time: Thu May 22 02:44:37.642 2014 (UTC + 6:00)
System Uptime: 2 days 2:05:26.047
BugC... Read more

Read other 6 answers
RELEVANCY SCORE 68.4

PC Specs:
- EVGA x58 ftw3 Mobo
- Intel I7 9600 (Stock)
- 12gb Corsair Vengeance (3x4)
- Gigabyte GTX 570 Factory OC (left at settings set by Gigabyte)
- Corsair TX750 PSU
- OCZ Agility 3 120 GB
- Case: Coolermaster HAF 932
- OS: Windows 7 64bit pro

Hello,

I've been having a consistent BSOD (BLACK). Usually this occurs while gaming, watching movies, etc. but i've had times where it just does it sometime while idle. Here is a list of diagnostics i've tried with failures and attached is the ZIP file that you requested in the BSOD guide.

1 - Uninstalled video drivers, used DriverSweeper, re-installed current WHQL drivers.
2 - Installed legacy drivers using the same method
3 - Removed graphics card from PC and placed in friends computer (nearly the same machine) and it survived an hour stress test with Heaven Benchmark.
4 - Ran Memtest86 overnight, no errors
5 - Attempted one stick of ram at a time, crashes on all of them.
6 - Reformatted and reinstalled W7, installed current drivers before anything else
7 - Installed Windows 7 on a different HDD in my PC
8 - Updated BIOS to latest version
9 - Updated chipset drivers
10 - Physically cleaned PC of dust
11 - Ran GPU monitoring software while gaming, did not reach above 70C

There may be a few more things i've tried and am not mentioning but those are most if not all of them. I'm thinking its either my PSU or worse, my mobo :( But hopefully it isn't either of those and you guys can help me out. If there ... Read more

A:BSOD at random intervals - Mostly while GPU in use

Hi Welcome to TSF

Do you happen to have another PCI E slot which you can put this card into
I see the mini dumps are all related to the Graphic Drivers and those are up to date drivers
You also went and installed legacy drivers which did not work for you but card seems to do ok in another machine making me think that its is your PCI E slot
Change that run some tests and see what you get

Read other 19 answers
RELEVANCY SCORE 68.4

I have been experiencing a BSOD at ever increasingly random intervals. The system is running Windows 7 Home Premium x64.

Sometimes it will not happen at all sometimes it will happen 8-9 times within one given day. Before I tried to problem solve the problem myself I figured I would give this a shot and see what you guys think.

I have attached the appropriate .zip file for your inspection. Appreciate any help you can offer!

Thanks

A:BSOD Random Intervals

Hello and welcome Jordan first off mate w e need to know the system specs as it is like asking me to change a wheel on a rail train and not even know what I am working with.
So please use this System Info - See Your System Specs

In the meantime use this https://www.piriform.com/speccy & this Screenshots and Files - Upload and Post in Seven Forums so that at least see the temps in the machine.

Read other 1 answers
RELEVANCY SCORE 68.4

BCCode: 4e
BCP1: 0000000000000099
BCP2: 00000000000BE4C9
BCP3: 0000000000000002
BCP4: 00000000000CD648
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1

I have been experiencing this problem for the past week, the BSOD will come up with different error codes each time. I built my computer last month and it had been running fine up until last week after i installed and played Planetside 2. I don't think the game could have caused this. I have tried clean installing the graphics drivers and updated the motherboard drivers to no avail. I have attached a compressed file with the results of the Seven Forums Diagnostic tool, any help would be appreciated. (I'm sorry if this post isn't up to par, it is my first time posting on this forum)

A:BSOD at random intervals regardless of what I am doing

Code:
Microsoft (R) Windows Debugger Version 6.2.9200.20512 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.


Loading Dump File [C:\Users\USER\Downloads\SF_28-09-2013\092813-12168-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*C:\SymCache*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7601.18229.amd64fre.win7sp1_gdr.130801-1533
Machine Name:
Kernel base = 0xfffff800`01e05000 PsLoadedModuleList = 0xfffff800`020486d0
Debug session time: Sun Sep 29 00:33:48.595 2013 (UTC + 6:00)
System Uptime: 0 days 4:30:51.204
Loading Kernel Symbols
...............................................................
................................................................
........................................
Loading User Symbols
Loading unloaded module list
......
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 4E, {99, ... Read more

Read other 1 answers
RELEVANCY SCORE 68.4

I've used memtest. I have replaced the video card. (Using the onboard video) I have swapped out memory. I now need expert advice.

I dual boot xp or windows 7. I get the BSOD on both operating systems.

win 7 x64 ultimate.
xp

Thanks for any advice and help that comes my way.

A:BSOD Need Help random intervals.

Problem Devices:
Code:
LogMeIn Kernel Information Provider ROOT\LEGACY_LMIINFO\0000 This device is not present, is not working properly, or does not have all its drivers installed.
MpKsl9518e5d9 ROOT\LEGACY_MPKSL9518E5D9\0000 This device is not present, is not working properly, or does not have all its drivers installed.
Looks like your LogMeIn and Microsoft Security Essentials programs are not installed properly. Uninstall both through Start Menu -> Control Panel -> Uninstall a program, download fresh copies of each, and then install the fresh copies.
You have no security software set to run on startup of the system. I recommend either of these:Microsoft Security Essentials - Free Antivirus for Windows coupled with Malwarebytes. Do not start the free trial of Malwarebytes. Just use the standalone version, update it, and scan your computer once a week with Malwarebytes and with Microsoft Security Essentials.

Good and Free system security combination.

After installing your security software, update it, and then run full scans today with each program. Report back the results of the scans.
You have a variety of BugCheck codes for your crashes. That usually means hardware is involved. Run some hardware checks.If you are overclocking any hardware, please stop.

If you have an SSD, make sure the following are up to date:SSD firmware
BIOS Version
Chipset Drivers
Hard disk controller drivers/SATA drivers
If you have a Marvell IDE ATA/ATAPI device, make sure the drive... Read more

Read other 1 answers
RELEVANCY SCORE 68.4

Hi....I custom built my system using a copy of Windows 7 Ultimate purchased from Purdue University. It is an upgrade copy.
I have recently been having unexpected shutdowns, which I initially thought were from downloading large files, but I just had one where I wasn't downloading any large file. I just had my two email programs up (Outlook 2007 & Thunderbird)
Below you will find some info about my system. Please let me know if you need more info. Thank you for your time and consideration.

Manufacturer/Model Number Custom Build
OS Windows 7 Ultimate SP1 64-bit
CPU Intel Core i7 860 @ 2.8GHz
Motherboard Asus P7P55D Pro
Memory Patriot 1600EL Series 16GB running XMP-1600
Graphics Card(s) NVidia GeForce 9600 GT 1GB Memory
Sound Card Integrated into MB
Monitor(s) Displays Asus 19" VH198T
Screen Resolution 1440 x 900
Hard Drives ST31000528AS (two)
ST31500341AS (two)
total of 4 physical, but 6 logical
PSU OCZ Stealth X Stream 700Watt
Case Antec Three Hundred
Cooling 4 120mm fans + 140mm top fan

A:BSOD at random intervals

Code:
Loading Dump File [D:\Kingston\BSODDmpFiles\bpierce\Windows_NT6_BSOD_jcgriff2\022112-24928-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (8 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7601.17640.amd64fre.win7sp1_gdr.110622-1506
Machine Name:
Kernel base = 0xfffff800`03252000 PsLoadedModuleList = 0xfffff800`03497670
Debug session time: Tue Feb 21 19:39:25.602 2012 (UTC - 7:00)
System Uptime: 0 days 10:39:10.492
Loading Kernel Symbols
...............................................................
................................................................
...........................
Loading User Symbols
Loading unloaded module list
.....
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 24, {c08a5, 0, 0, 0}

Probably caused by : Ntfs.sys ( Ntfs!NtfsPagingFileIo+155 )

Followup: MachineOwner
---------

4:... Read more

Read other 7 answers
RELEVANCY SCORE 68.4

Hi guys,

Apologies if this has been solved already but couldn't find anything similar to my problem so thought it would be best if I started a new thread.

So in the last 6-8 months, I have been encountering a gradual degradation of stability whilst my system is running, both under load and whilst idling. My system is custom-built (Gigabyte 990FXA-UD5 rev3, AMD Phenom II X6 1100t BE CPU, 2 x 4Gb Generic DDR3 1333mhz RAM, EVGA GTX650Ti graphics card, 1 x Samsung EVO 250Gb SSD (running W7 X64 Ultimate) and a WD 2tb mech HDD for internal storage. All powered by an OCZ modxstream 700w PSU.) The system had gradually over the space of 6-8 months become more and more unstable, with random crashes and BSOD's both under load and whilst just idling or using the system under very light system use (browsing the net/watching streaming media.) Come last weekend, when I get the most horrific BSOD and then can't log back into Windows, both in normal and safe mode, due to a missing or corrupted registry file. Anyhow, subsequently, after recovering the system from a backup I had made, I managed to log back into Windows and ran SFC which showed a couple of hundred system files which were damaged and couldn't be repaired. I formatted both the internal drives (to ensure removal of any malware) and have reinstalled my OS onto my SSD. Had a bit of a 'mare trying to get the chipset drivers in and for the system to actually recognise the mb as a Gigabyte board and accept the drivers but all sor... Read more

A:BSOD's at random intervals

Additional information is required.

1. Download the DM Log Collector application to your desktop by clicking the link below

DM Log Collector.exe

2. Run it by double-clicking the icon on your desktop, and follow the prompts.
3. Locate the .ZIP file that is created on your desktop, and upload it here in your next reply.

Read other 5 answers
RELEVANCY SCORE 68.4

Attachment 52865
I tried to get all the files however I noticed there was some errors when issuing commands such as tasklist (I was running as administrator)

The crashes have occurred ever since I built this computer, been re-installed several times (windows 8/8.1) and has a new GPU as to what it used to have.

There are 3 ways I can BSOD/crash.
1: It will successfully show a BSOD screen and collect data (uncommon)
2: It will just reboot without warning (common)
3: It will just hang and audio stops and no input works (most common)
What causes it
It sometimes happens if I leave my room for a minute, I'll come back and it will be on the start-up screen.
If I'm playing a game or when I first used [email protected]
I noticed today using HandleBrake if I encode using x264 my PC will crash 99% of the time, ffmpeg4 it doesn't.

After a crash there's a high liklihood that applications I have open will lose their settings for example Google Chrome, Puush, Steam.

What have I tried so far?
Previously I have re-installed windows several times
memtest
sfc /scannow
Re-installed AMD drivers after using the clean-up tool I found on these forums.

I know you're not meant to post if your windows is not up to date - however yesterday and today I tried to install the updates, upon restarting I get past the Windows splash screen and then my right monitor will flash white once or twice then both will be black. I can see num-lock flicker off-on every few seconds as well as the power icon on my main ... Read more

A:BSOD at random intervals

Sorry for the delay in responding. There just aren't that many people who do BSOD analysis, so at times we get a bit overwhelmed!

Do your still need help with this problem?
I will be notified if you reply to this topic and will respond within 48 hours.

Read other 13 answers
RELEVANCY SCORE 67.6

The BSOD seems to occur randomly. I need some help to fix it.



Microsoft (R) Windows Debugger Version 6.12.0002.633 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.


Loading Dump File [C:\Windows\Minidump\New folder\062112-26130-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: *** Invalid ***
****************************************************************************
* Symbol loading may be unreliable without a symbol search path. *
* Use .symfix to have the debugger choose a symbol path. *
* After setting your symbol path, use .reload to refresh symbol locations. *
****************************************************************************
Executable search path is:
*********************************************************************
* Symbols can not be loaded because symbol path is not initialized. *
* *
* The Symbol Path can be set by: *
* using the _NT_SYMBOL_PATH environment variable. *
* using the -y <symbol_path> argument when starting the debugger. *
* using .sympath and .sympath+ *
*********************************************************************
Unable to load image \SystemRoot\system32\ntoskrnl.exe, Win32 error 0n2
*** WARNING: Unable to verify timestamp for ntoskrnl.exe
*... Read more

A:BSOD Occurs At Random

Crashes point to a corrupted Windows installation or a service/startup program conflict. Start by going through the steps to Troubleshoot Application Conflicts by Performing a Clean Startup

Read other 1 answers
RELEVANCY SCORE 67.6

Hey!

I have been trying to fix this problem... At random times the computer crashes and has a BSOD. The latest crash report has been attached. Thanks heaps.

Read other answers
RELEVANCY SCORE 67.6

Hi everyone

I have a 6 month old Sony vaio sa that gets a BSOD at seemingly random intervals. The computer half-freezes in the sense that programs work, but when I click on them they freeze. Music still plays, people hear and see me on Skype if I'm on video chat but nothing updates on my screen and the programs hang. After a minute or two the computer goes into a bluescreen and restarts automatically. It's been happening quite frequently over the past two months but I only have mem dump files from 3 weeks back, unfortunately.

I have a feeling it's related to my Corsair Force GT 120GB SSD, but I'm not sure.

Memory dumps attached

A:BSOD at seemingly random intervals

Welcome

I'm taking a look at the dumps.

Have you updated to the latest firmware for your SSD?
Do update it if not done yet.

Edit:

I saw the dumps, they don't show a probable cause.
IF and after you get the latest firmware. Do these:

* To make sure the hard drive is good:
Disk Check

* Run the System File Checker for repairing any damaged
files within windows:
SFC /SCANNOW Command - System File Checker

If the problem persists, let us know. We'll do more troubleshooting.

Let us know your feedback

Read other 9 answers
RELEVANCY SCORE 67.6

I get random BSOD's indicating a problem with arthr.sys

In addition to the wireless card in the notebook I also use a USB TP Link TL722N antenna. Landlord lets me use her wireless but the signal is weak.

Any help VERY appreciated!

A:BSOD at random intervals arthr.sys?

It is crashed by the TP-LINK 150Mbps Wireless Lite N Adapter driver.

Code:
Unable to load image \SystemRoot\system32\DRIVERS\athur.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for athur.sys
*** ERROR: Module load completed but symbols could not be loaded for athur.sys
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 1000007E, {c0000005, b164eca8, aa14ac60, aa14a840}

Probably caused by : athur.sys ( athur+24ca8 )

Followup: MachineOwner
---------
And that is very old.

Code:
b162a000 b179d000 athur T (no symbols)
Loaded symbol image file: athur.sys
Image path: \SystemRoot\system32\DRIVERS\athur.sys
Image name: athur.sys
Timestamp: Tue Jan 05 08:50:06 2010 (4B42AFE6)
CheckSum: 00179489
ImageSize: 00173000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
Update it from Download - Welcome to TP-LINK

Also update:
Network Connect VPN software by Juniper Networks: Support - Juniper Networks
Broadcom 802.11g WLAN: Search in HP's site.
Atheros AR8132 PCI-E Fast Ethe... Read more

Read other 9 answers
RELEVANCY SCORE 67.6

I've been having BSOD problems for the past four days. This is a new install with a new board and processor. I've tried running memtest86 on all my ram chips individually, as well as in every slot and no errors occurred. I've updated all my drivers. I tried replacing the Killer Network driver with the Atheros driver. I updated my bios. I ran Windows Repair off of the disc. None of these have helped anything.

Specs:
i7-4470k
16gb DDR3 1600 16gb RAM (4x4)
Dual 1tb HDD
Sapphire 7870
Windows 7 Home 64bit
MSI Z87-G45

I'm at a complete loss as to what to do. Any help is appreciated.

A:BSOD at random intervals, during different operations.

Welcome to the Forum.

If you are overclocking any hardware, please stop.

Remove MSI software with Revo Uninstaller.
RTCore64.sys Tue Sep 6 18:24:50 2011
RivaTuner/EVGA Precision/MSI Afterburner (known BSOD issues w/Win7)
Driver Reference Table -RTCore64.sys

NTIOLib_X64.sys Thu Oct 25 16:27:58 2012
MSI Afterburner driver (known BSOD issues with Windows) Also found to be a part of MSI Live Update 5
Driver Reference Table -NTIOLib_X64.sys



   Note
Download and install Revo Uninstaller free from here: Download Revo Uninstaller FreewareOpt for "Advanced Mode" and uninstall the software (also delete the leftover registry entries).
Update:
LGPBTDD.sys Thu Jul 2 00:47:52 2009
Logitech GamePanel Software
Driver Reference Table -LGPBTDD.sys

Uninstall your current antivirus it seems to contribute to your BSOD's. Replace with Microsoft Security Essentials & the Free version of Malwarebytes, update and make full scans separately:Uninstallers (removal tools) for common antivirus software - ESET Knowledgebase

Microsoft Security Essentials - Microsoft Windows

Malwarebytes Free Do not start the trial version of MalwareBytes

You may also take a look at:Good & Free System Security CombinationReduce items at start up:Performing a Clean Startup in Windows 7

Add, or Remove Startup Programs in Windows 7
Your Antivirus software is basically whats just needed there.

Use the System File Checker tool and... Read more

Read other 9 answers
RELEVANCY SCORE 67.6

I keep getting random BSODs. I have not been able to get the debugger to work in order to narrow down the error. So, I've tried to follow the instructions on the info required (files are attached) and any help gratefully received.

thanks!

Puzzled


System Spec:-
- Win 7 home Premium x64 ?
- it is a home built PC with an OEM version of windows
- Build from new this July

A:BSOD at random intervals tha I am unable to fix

  
Quote: Originally Posted by Puzzled68


I keep getting random BSODs. I have not been able to get the debugger to work in order to narrow down the error. So, I've tried to follow the instructions on the info required (files are attached) and any help gratefully received.

thanks!

Puzzled


System Spec:-
- Win 7 home Premium x64 ?
- it is a home built PC with an OEM version of windows
- Build from new this July


There are 9 suspected causes. It is one of three things.

The OS:

Run system file check

Run a system file check to verify and repair your system files.
To do this type cmd in search, then right click to run as administrator, then
SFC /SCANNOW

It may need to be run up to three times before sucessful

Read here for more information SFC /SCANNOW Command - System File Checker

Let us know the results from the report at the end.

RAM or a driver. Please run these

1-Memtest.





Quote:
*Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Memtest86+ - Advanced Memory Diagnostic Tool

*Boot from the CD, and leave it running for at least 5 or 6 passes.

Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot.

Test the sticks individually, and if you find a good one, test it in all slots.

Any errors are indicative of a memory problem.

If a known good stick fails in a motherboard slot it is probably the slot.
... Read more

Read other 3 answers
RELEVANCY SCORE 67.6

Over the past week I have been getting random BSOD, first thought it was Firefox, but then a few have happened while using other programs. Installed Fan Speed yesterday to check if it is a temp issue, CPU doesn't get above 60C, average around 55.

Any help would be great!

A:BSOD random intervals BCCode 101

|||

Read other 5 answers
RELEVANCY SCORE 67.6

BSOD has been appearing seemingly randomly for a few weeks (I'm so on top of getting things fixed). Here's the information from the error report:

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 1033
Additional information about the problem:
BCCode: d1
BCP1: 0000000000000000
BCP2: 0000000000000002
BCP3: 0000000000000000
BCP4: FFFFF88004E73A45
OS Version: 6_1_7601
Service Pack: 1_0
Product: 768_1
Files that help describe the problem:
C:\Windows\Minidump\061612-38828-01.dmp
C:\Users\Owner\AppData\Local\Temp\WER-52400-0.sysdata.xml
Read our privacy statement online:
Windows 7 Privacy Statement - Microsoft Windows
If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt


I'm using Windows 7 Home Premium 64bit
It's the original OS
OEM, although it was reinstalled a few months ago
Hardware is approximately 3 years old

.zip file attached with all the diagnostic information. Thanks for any help.

A:BSOD at seemingly random intervals

All crashes were caused by your NETw5s64.sys driver, which is your Intel 5100 wifi. I would recommend re-installing the driver with the latest update. You will find the driver in Device Manager under Network adapters. The update you can get from Intel, http://downloadcenter.intel.com/Default.aspx, or from your vendor support site (HP Support).
To fully re-install a driver, use the following steps.First, download the latest driver. Then do the next steps.
Click Start Menu
Right Click My Computer/Computer
Click Manage
Click Device Manager from the list on the left
Find the device you are trying to uninstall by expanding the appropriate set of devices
Right click the device
Click Uninstall (do not click OK in the dialog box that pops up after hitting Uninstall)
Put a tick in Delete driver software for this device (if this option is available, otherwise just hit OK) and hit OK
Restart your computer only if Windows asks you to.
Install the latest driver for the device.

Alternatively:Login as an adminstrative user.
First, download the latest driver. Then do the next steps.
Click Start Menu
Click Control Panel
Click Hardware and Sound
Click Device Manager (the last link under Devices and Printers)
Find the device you are trying to uninstall by expanding the appropriate set of devices
Right click the device
Click Uninstall (do not click OK in the dialog box that pops up after hitting Uninstall)
Put a tick in Delete driver software for this device (if this option is available, oth... Read more

Read other 1 answers
RELEVANCY SCORE 67.6

Throughout the day my computer will BSOD each time it will say a different reason and I will be doing something completely different each time. Sometimes I am gaming, watching live streams, or absolutely nothing. Thanks in advance for any help you guys give me.
P.S.
I hope I did the attachment right lol

Read other answers
RELEVANCY SCORE 67.6

Hey there,

I have started recieving BSOD recently and would love some help. The crashes started after I had spent a while trying to reconnect to my home wireless (I have an often faulty wireless adapter.) At points I had unplugges the adapter and plugged it back in causing it to install drivers again. Once I got reconnected I had my first BSOD while on facebook. I tried going back on but it just kept crashing after a 5 - 10 minutes.

Cheers,
Jack

A:BSOD seemingly random intervals

Welcome your BSOD, seems to be caused by this driver
Netr7364.sys
Productname:Ralink 802.11 Wireless Adapters Description:Ralink 802.11 USB Wireless Adapter Driver Company:Ralink Technology, Corp
Go to the website and look for an updated driver.

Read other 1 answers
RELEVANCY SCORE 67.6

At random points throughout the day I get the BSOD and my computer restarts.

I haven't installed any new hardware, I've played around with the my antivirus and such as well as ensuring everything is firmly in my motherboard.

I have attached my minidump file in the hope that some kind soul can end my misery.

Kindest regards,

Clive.

A:BSOD at random intervals daily.

  
Quote: Originally Posted by CliveK


At random points throughout the day I get the BSOD and my computer restarts.

I haven't installed any new hardware, I've played around with the my antivirus and such as well as ensuring everything is firmly in my motherboard.

I have attached my minidump file in the hope that some kind soul can end my misery.

Kindest regards,

Clive.


ASACPI.SYS
The pre 2009 version of this driver is a known BSOD cause.

Please visit this link: ASUS teK Computer Inc. -Support- Drivers and Download P7P55D LE
ASUSTeK Computer Inc. -Support- Drivers and Download P7P55D LE

Scroll down to the Utilities category, then scroll down to the "ATK0110 driver for WindowsXP/Vista/Windows 7 32&64-bit" (it's about the 12th item down).
Download and install it.
Go to C:\Windows\System32\drivers to check and make sure that the ASACPI.SYS file is date stamped from 2009 or 2010 (NOTbefore).

Read other 2 answers
RELEVANCY SCORE 67.6

Win7 64bit gaming laptop (though used for work and not games..)

Logs attached. I appreciate the help.

A:BSOD random times and intervals

Diagnostic Test

 RAM TEST

Run MemTest86+ to analyse your RAM. MemTest86+ - Test RAM - Windows 7 Forums



   Note


MemTest86+ needs to be run for at least 8 passes for conclusive results. Set it running before you go to bed and leave it overnight. We're looking for zero errors here. Even a single error will indicate RAM failure.

Read other 1 answers
RELEVANCY SCORE 67.6

Just got my new computer set up.

Have installed everything myself, and everything seamed to work perfectly in the beginning.

After a while(same day) I started to get BSOD at random intervals.

I don't know where the problem is, but I have been using Prime95 to stress-test the computer. Everything then went ok. Turned it off and left the computer, but when I came back. i was greeted with message that the computer had turned off incorrectly. The BSOD have happened mostly when I have been away from the computer, but they have also appeared a few times when I have been working on it.

At average a few times a day maybe. Got it up and running on Sunday, so have not been running that long.

I have also ran the Memory Diagnostic tool that is built into Win 8, with no errors.

My Hardware spec:
Motherboard: Asus Z87-Pro
CPU: Intel i5-4679K
RAM: Kingston HyperX blu 2X8GB, KHX16C10B1K2/16X
HDD: Samsung 840 Pro 256GB (system disc)
Intel SSDSA2M080G2GC Intel 80 GB X25M Mainstream SATA II Solid-State Drive
Samsung HD103UJ
PSU: BeQuiet! Straight Power E9 CM 680 W

For referance, the CPU is going on higher speed than the stock set-up. Have been using the Asus automatic 4-way optimization thru the Utility "AI Suite 3". Don't know how to undo these changes. Can manually go into the TPU sectino of the program and reduce the Ratio down so that it runs on the stock speed, but I don't know what else the 4-way Optimization did.
I have also enabled the XMP profile in t... Read more

A:BSOD happening at random intervals

Just had 2 BSOD in a row. First when playing Minecraft, and the second while trying to write this post!

Uploading the latest spec and dumps.

Hope there is someone out there that understands this more than me..

Read other 15 answers
RELEVANCY SCORE 67.6

For the last few days while watching a stream, netflix on chrome, or playing not so high end games, about every hour my computer will freeze and then stutter occasionally. CTRL ALT DEL does nothing and after a few minitues the computer will BSOD then restart itself and one time spewed an error message about memory. But the odd thing is that I happened to be on skype and for most of the duration of the freeze, I was still able to talk to my brother. My CPU and GPU seem to be operating normally. The windows memory diagnostic showed nothing. It may have crashed during a memtest, I uploaded the results from the SF Diagnostic.

specs:
CPU: Intel Core i5-2500
Motherboard: Gigabyte Z68M-D2H
GPU: NVidia GeForce GTX 560 Ti
Memory: 4Gx2|GSKILL F3-12800CL9D-8GBRL
Storage: SSD 64G|CRUCIAL CT064M4SSD2 R
PSU: OCZ|OCZ700MXSP 700W RT
OS: Windows 7 64bit

Thank you for any help you might have!

A:Freezes and BSOD at random intervals.

The issue is sleep/hibernation related. As yours a desktop computer, hibernation is not anything needed there, specially when you have a very limited 11 GB free space only in your C drive.

Disable hibernate following the instruction : Hibernate - Enable or Disable

Get rid of intel rapid storage. First uninstall it from Control Panel > Programs and Features. Then Uninstall the driver from device manager.
Right click on "my computer" icon and click "manage" on the context menu.
It will open the "computer management" window.
Select "Device Manager" in the left pane, It will list all the existing devices up.
Expand "IDE ATA/ATAPI controllers" by clicking on the triangle in front of it.
Select one Intel device item under it, right click, uninstall.
Continue the process for all Intel items under "IDE ATA/ATAPI controllers"
Now restart the computer. At restart, windows will auto configure the appropriate native system driver.
Make it sure that your Crucial M4-CT064M4SSD2 is running with the latest firmware.

Free up the startup. Windows does not need any other program to auto start with it, but the auto start programs often conflicts and causes various problems including BSODs.
Click on the Start button
Type “msconfig (without quotes), click the resulting link. It will open the System Configuration window.
Select the “Startup” tab.
Deselect all items other than the antivirus.
Apply > OK
Accept... Read more

Read other 3 answers
RELEVANCY SCORE 67.6

Hi There,

Started happening around 6 weeks ago, seems happen once a week. Only since I upgraded to Windows 10 so not sure if that is related or not?

Kind Regards

Read other answers
RELEVANCY SCORE 67.6

Hey All,

I was hoping for a little bit of advice/ guidance as I have this ongoing BSOD issue and I am truly out of ideas.

My Desktop goes through phases of BSODing, sometimes it won't do it for a few days then will BSOD upon boot consistently. When BSODing the errors I receive are either "KERNAL_INPAGE_ERROR" or "A process or thread crucial to system operation has unexpectedly exited or been terminated".


I have done a complete re install of the OS on a different Hard Disk to ensure that it was not a Windows issue. After a few hours the issue started again on the new image. Chkdsk and MemTest showed that there was no hard disk or RAM problems.


I am kind of out of ideas at this point so any help you could provide would be greatly appreciated.

Thanks In Advance.

A:Phases of BSOD at random intervals

You should make a post in the Crashes & Debugging Forum. For best results use the instructions given at the top of the forum.
Here: http://www.sevenforums.com/crashes-d...tructions.html

If you want to try self diagnoses, see this here: Crash and lockup debug 'How To' - Windows 7 Forums

Yours seems to be hardware related, an analysis of the crash reports may point to the offending device.

Read other 1 answers
RELEVANCY SCORE 67.6

Hello all
Hoping someone can help shed some light on the problems I'm having.
Recently up(down)graded to W10 and ever since I've had no end of instability issues resulting in BSOD's.
So far I've updated all my drivers which stopped the BSOD's for a few days but now they're reoccurring.
I can't identify a specific causation for them, of late they can occur just after startup, or within minutes/hours.

Look forward to any advice I can get.

G-PC-Wed_02_17_2016_171507_76.zip

A:Regular BSOD at random intervals

   Warning
Programs that claim to update your drivers install either the wrong or corrupted drivers.
If you have installed any driver with Driver Booster 3, please remove them as it may cause trouble.

Please remove Gigabyte software, it is known for being BSOD causes.

Please remove Avira and use Windows Defender as alternative

Code:
*** WARNING: Unable to verify timestamp for avgntflt.sys
*** ERROR: Module load completed but symbols could not be loaded for avgntflt.sys
Please update your BIOS
GIGABYTE - Moederbord - Socket 1156 - GA-H55M-UD2H (rev. 1.0)

Let me know how it goes

Read other 0 answers
RELEVANCY SCORE 67.6

Hi Folks,

Please advise if I have not done this right....

Lenovo Z580 Ideapad, I5, 8gb Ram, 1TB HD

Last week it started freezing randomly and I mean everything froze - Mousepad, keyboard and the whole shebang. Only way to resolve was a hard reset which I loathe doing.

I figured this may be a software issue but after extensive trial and error I could not pinpoint the issue. I backed everything of value up and done a system refresh but didn't help so I done a complete system reset.

It's still freezing but I now know it's not a software problem as all the software not preinstalled have be deleted.

I have done tests on the HD and the processor and they seem fine. I can't do a memory test (memtest86) as there seems to be an ongoing issues with the Z580 series whereas I cannot access the boot menu:

The novo button loads this up but when you select the boot menu option it just proceeds to boot to windows.

All drivers are up to date and all windows (8.1) files are up to date. Virus scans and malware scans have come back clear.

It's hit and miss, sometimes it will go for hours and be ok, other it will happen several time within an hour.

it's since been in for repair under the extended warranty but they returned it first as they could not replicate then after it went back it, blamed in on Utorrent (Which was installed after the first time it had been in for repair)

Since then, I removed the battery and let it run off the mains and instead of freezing I had the BSOD whi... Read more

A:BSOD WHEA_UNCORRECTABLE_ERROR - Random intervals.

Hi Gumble316 & Welcome to the forums ^_^,

I have analyzed your dump files and below has been provided an analysis of the same for informative purposes :-

Code:
1: kd> !analyze -v*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
WHEA_UNCORRECTABLE_ERROR (124)
A fatal hardware error has occurred. Parameter 1 identifies the type of error
source that reported the error. Parameter 2 holds the address of the
WHEA_ERROR_RECORD structure that describes the error conditon.
Arguments:
Arg1: 0000000000000000, Machine Check Exception
Arg2: ffffe0014bbbc028, Address of the WHEA_ERROR_RECORD structure.
Arg3: 00000000be000000, High order 32-bits of the MCi_STATUS value.
Arg4: 0000000000800400, Low order 32-bits of the MCi_STATUS value.
Debugging Details:
------------------


BUGCHECK_STR: 0x124_GenuineIntel
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT
PROCESS_NAME: System
CURRENT_IRQL: f
ANALYSIS_VERSION: 6.3.9600.17237 (debuggers(dbg).140716-0327) amd64fre
STACK_TEXT:
ffffd001`76909cf8 fffff803`08dd2213 : 00000000`00000124 00000000`00000000 ffffe001`4bbbc028 00000000`be000000 : nt!KeBugCheckEx... Read more

Read other 36 answers
RELEVANCY SCORE 67.6

Hi,
I've recently bought and put together all the components for a high-spec PC (The Specs should be on my account). However, I keep get BSOD with several different errors at random intervals that can sometimes be days apart from each other. These errors include:

Kindel_Data_Input_Error
Bad_System_Config_Info

And at one point I manage to take a picture of the specific numbers that appeared at the bottom of the blue screen:

*** STOP: 0x000000F4 (0x000000000000003, 0xFFFFFA800DAF0B30, 0xFFFFFA800DAF0E10, 0xFFFFF800033D7510)

There are three situations when the system would crash:
1. The start-up bar and all windowed programs would become unresponsive, but the mouse would still be movable, then, after a while, it would Blue Screen.
2. Whilst running chkdsk on start-up, it would get about half-way through and then Blue Screen.
3. Sometimes, after BSOD, the BIOS would fail to recognize my SSD Drive (I would have to go into boot menu and select it - Although I've heard this could simply be a common problem with the BIOS and the type of SSD I have).

So far all I've done is replace the cables connecting the SSD to the motherboard. I have also re-installed windows four times due to these blue screens.

If anyone could pinpoint the problem I'm having, that would be fantastic as I could easily replace any component within the PC as it's still under the thirty day warranty. The system information should be attached below.

Thanks,
Luke

A:New, self-built PC keeps getting BSOD at random intervals.

Hello Dywindel, welcome aboard.

There is no dump file included in the zip you supplied. It would be better if you provide the dumps too.

Apparently it is seeming that your SSD is keeping terminated. What is the driver you are using for Agility 3 (Marvell most probably?)? I would suggest you to use Microsoft's default drivers.

Read other 9 answers
RELEVANCY SCORE 67.6

I've been having this problem intermittently, sometimes it will be fine for a few days other times it will BSOD 3 times in one day. It doesn't seem to matter if I'm working with the computer or if it's just sitting there. Here is the latest dump, and the SF Diagnostic Tool file is attached.

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 1033

Additional information about the problem:
BCCode: 7f
BCP1: 0000000000000008
BCP2: 0000000080050033
BCP3: 00000000000406F8
BCP4: FFFFF800030C6F24
OS Version: 6_1_7601
Service Pack: 1_0
Product: 768_1

Files that help describe the problem:
C:\Windows\Minidump\012414-25490-01.dmp
C:\Users\Ray\AppData\Local\Temp\WER-34647-0.sysdata.xml

Read our privacy statement online:
Windows 7 Privacy Statement - Microsoft Windows

If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

Thanks in advance

A:BSOD BCCode 7f at random intervals

Welcome to the forum.

AVG is contributing to your BSOD's. Please remove it for testing purpose. Use Microsoft Security Essentials.

Recommended from a strict BSOD perspective, compatibility & stability compared to other security software:

Microsoft Security Essentials - Free Antivirus for Windows

Malwarebytes - Free

Good and Free system security combination.

sptd.sys Wed Sep 11 02:59:02 2013 (522F8816)
SCSI Pass Through Direct Host - Daemon Tools (known BSOD issues with Win7)
Driver Reference Table - sptd.sys

Daemon Tools/Alchohol is known to cause BSODs:
How to remove sptd.sys from system
Registry and SPTD problems | DAEMON Pro Help

Use Revo Uninstaller to uninstall stubborn software. Opt for Advance Mode while uninstalling which allows leftover registry removal:Download Revo Uninstaller Freeware - Free and Full Download - Uninstall software, remove programs, solve uninstall problems

Please update these older drivers. Links are included to assist in looking up the source of the drivers. If unable to find an update, please remove (un-install) the program responsible for that driver. DO NOT manually delete/rename the driver as it may make the system unbootable!:-

Afc.sys Wed Jul 12 11:48:20 2006 (44B48D24)
Arcsoft(R) ASPI Shell (CD/DVD program)
Driver Reference Table - Afc.sys

archlp.sys Fri Feb 6 18:39:29 2009 (498C2F81)
Arcsoft Total Media Player driver
Driver Reference Table - archlp.sys

Perform a clean install of a ... Read more

Read other 5 answers
RELEVANCY SCORE 67.6

I just recently developed a problem with my computer crashing every time i start it up. I ran malwarebytes anti-malware and it removed three trojan viruses and ever since then it constantly comes up with the blue screen of death. i tried using safe mode and it still pops up after the startup screen. Im thinking that the malwarebyte may have removed a system file possibly. I also tried installing and running AVG and when it runs it pops up with a message saying that I am missing a file and AVG cannot perform a restore. Any advice? I can get some time on myh computer before it restarts but dont know how much before BSOD.

A:constant BSOD at random intervals

Hello, would you post that MBAM log?The log is automatically saved and can be viewed by clicking the Logs tab in MBAM.Copy and paste the contents of that report in your next reply. Be sure to post the complete log to include the top portion which shows MBAM's database version and your operating system.Maybe we can get an Online scan in.Please perform a scan with Eset Online Antiivirus Scanner.This scan requires Internet Explorer to work. Vista/Windows 7 users need to run Internet Explorer as Administrator.To do this, right-click on the IE icon in the Start Menu or Quick Launch Bar on the Taskbar and select Run As Administrator from the context menu.Click the green button.Read the End User License Agreement and check the box: Check .Click the button.Accept any security warnings from your browser.Check Check Remove found threats and Scan potentially unwanted applications. (If given the option, choose "Quarantine" instead of delete.)Click the Start button.ESET will then download updates for itself, install itself, and begin scanning your computer.If offered the option to get information or buy software at any point, just close the window.The scan will take a while so be patient and do NOT use the computer while the scan is running. Keep all other programs and windows closed.When the scan completes, push Push , and save the file to your desktop as ESETScan.txt. Push the button, then Finish.Copy and paste the contents of ESETScan.txt in your next reply.Note: A log... Read more

Read other 15 answers
RELEVANCY SCORE 67.6

Hi

PC has just (a few weeks ago) begun to give BSOD. They don't appear to be consistent.

Windows Update is up to date, OS is geniune and I've used 2 different sticks of memory, but its still unstable. And I've not added anything new.

Can someone have a look at the dump file please?

Thanks
Jay

A:BSOD at random intervals. There's no consistency.

Welcome to the forums jamiepugh,


Code:
BugCheck A, {fffff880008b5610, 2, 1, fffff8000308576f}

*** WARNING: Unable to verify timestamp for MpFilter.sys
*** ERROR: Module load completed but symbols could not be loaded for MpFilter.sys
Probably caused by : MpFilter.sys ( MpFilter+b4e4 )
It seems that the MSE driver may have referenced invalid memory address, and then attempted to cause a interrupt at a IRQL level which was too high.


Code:
2: kd> lmvm MpFilter
start end module name
fffff880`011c3000 fffff880`011fb000 MpFilter T (no symbols)
Loaded symbol image file: MpFilter.sys
Image path: \SystemRoot\system32\DRIVERS\MpFilter.sys
Image name: MpFilter.sys
Timestamp: Wed Oct 31 22:43:06 2012 (5091A97A)
CheckSum: 0003BD03
ImageSize: 00038000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
Remove MSE (Microsoft Security Essentials)
Install MSE, and then fully update.
Run a Full Scan
Run Driver Verifier to scan for any corrupted drivers which may be causing problems, this program works by running various stress tests on drivers, in order to produce a BSOD which will locate the driver; run for least 24 hours:Driver Verifier - Enable and Disable


   Information
Additional Help - Using Driver Verifier to identify issues with Drivers

Read other 9 answers