Over 1 million tech questions and answers.

Rio Chiba 128 Mass Storage Device not being recognized?

Q: Rio Chiba 128 Mass Storage Device not being recognized?

Hi all, well this is a long shot now to post a question about my prety old mp3 player(Rio Chiba 128). The thing is that I have a good amount of good music I would like to copy off of it. Anyways I have Vista Home Premium 32bit and when I plug in the mp3 player, it recognizes it as being a Rio Chiba device but can not find any available drivers for it. I already tried the following:-changed the cable-directed the "New Device" wizard to look for drivers in C:\Windows\INF , C:\Windows\winsxs-copied different copies of "usbstor.inf" & "usbstor.PNF" into C:\Windows\INF and different locations but none of those have worked-I have even tried deleting INFCACHE.1 and nothing. -went to: http://www.digitalnetworksna.com/support/r....asp?prodID=109 which is Rio's support page for this device but they claim it doesnt need a driver as the OS should read it as a mass storage device.The mp3 player still works fine and plays music as it should it just doesnt want to be recognized in either vista or xp. any help or suggestions is really appreciate it as Im very little away from giving up on it. Thanks all!

RELEVANCY SCORE 200
Preferred Solution: Rio Chiba 128 Mass Storage Device not being recognized?

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: Rio Chiba 128 Mass Storage Device not being recognized?

With it plugged in go to the Control Panel>Administrative Tool>Computer Management. Double-click on Storage. Double-click on disk Management.
On the top, click on Action and select Refresh

If it doesn't show, go to your Device Manager and see if there are any yellow exclamation points by the USB Root Hub Controllers

Read other 4 answers
RELEVANCY SCORE 102

I have WD 1 TB drive that was working fine. I noticed it had 3 partitions on it so I removed 2 of them with AOMEI Partition Assistant.
Aomei competed the operations and now my box will not recognize the drive. I tried it on my desktop and it also will not recognize the drive.
When I connect the drive, on either machine, it makes that "beep/bump" sound that lets me know something has been inserted but that is it.

Any ideas.

Also:
I went into device manager and told it to scan for hardware changes, that did nothing.
I tried to update drivers but that never completed. The progress bar just kept looking and did not find anything.
 

Read other answers
RELEVANCY SCORE 100

Hi there,
Could someone please tell me why is the HL-DT-ST CDRW/DVD GCC4244 drive on a Dell Latitude D500 being recognized by the system as a usb mass storage device?...and how to fix that in case it is not normal?
Thanks in advance,
osmany
 

A:Dvd room drive being recognized as a usb mass storage device

Disconnect the drive and tell us what the computer then reports. Your HLDS optical drive is among the most basic of all drives installed by Dell, but it has an extremely high failure rate.
 

Read other 6 answers
RELEVANCY SCORE 84

7 Month old HP Win7 6gb x64 machine. Keyboard and mouse drivers unaffected.USB Mass storage device properties messagewith driver check on:"Windows cannot verify the digital signature for the drivers required for this device."with driver check off:Tells me drivers are corrupt or missing.Search show diver where it should be: C:\Windows\System32\drivers\usbstor.sys (also usbfilter.sys).Used the HP Recovery Manager to restore factory setting for USBStor.sys, it indicates it is successful but no changeon reboot, still cannot use flash drives, SD cards, external HDs. Units work find on my laptop.Called HP 4 times, after extensive troubleshooting each time, following their instructions, go to hp.com/go/instant, get screen saying request has been received. Each time tech tells me he cannot find my request.After a while, read 2 hours, told they need to talk to supervisor, will call me back, KISS OF DEATH, never hear from them.So can I fix this or am I going to have to pay for repairing a seven month old HP?Or am I going to have to buy yet another pc?

A:USB Mass Storage Device will not recognize external storage devices

Nobody has a clue, huh?
I guess I am the only one ever to have this happen!
Ok, thanks, goodbye.

Read other 2 answers
RELEVANCY SCORE 81.2

Hello all....Help ...I can't seem to access my USB flash drive on my computer (XP professional operating system) once I insert it into the usb port...my computer acknowledges that there is a mass media device however when I go to My computer to access it there is no Letter associated with it..all my network drives and device drives are listed but no letter associated with my USB flash drive...How do I assign a letter to it so I can access it?

Thanks

Marci
 

A:USB flash drive mass storage not recognized

Read other 6 answers
RELEVANCY SCORE 78.4

Im having a problem with my usb mass storage device. I have a external io magic dvd 4x dual drive burner. I install the drivers restart my computer it detects the usb storage for when the computer boots till windows is loaded up and then i get the the yellow sign in the device manager. I havent changed or added any software. It has worked for the last 5 months till this last week. Anyone have any ideas?
 

A:Usb mass storage device

What does the yellow sign say?

You could try uninstalling all USB related drivers and let Windows reinstall them from scratch.
 

Read other 6 answers
RELEVANCY SCORE 78.4

I have a Genesys usb mass storage unit. I have the Vista driver and it's been installed properly. The problem is that it doesn't show up as a drive under my "computer."

I have tried to update the driver, uninstall and re-install and it still won't show up. It does show up in the "safely remove hardware" window and the device manager.

A:USB Mass Storage Device

Try these.... they are harmless steps...
1:stop plug and play service in services.msc and restart it... then,
2:start->right click on "computer"-> left click on manage-> on L.H.S. click on storage, click on disk management...on the R.HS. check in disk management if that USB drive shows up as unallocated space. If yes, reply to this post.

Read other 1 answers
RELEVANCY SCORE 78.4

When I put files [eg songs in this case] onto the USB device and then stick it in another computer it lets me play them but it says I can only do so while its plugged in. I got it because I was sure I would be able to copy them onto the second machine. It's not the write-protect switch that's preventing me...I've tried that approach.
I may be able to copy them with WMP by "copying the now playing" but that would be too slow.[if it even works]
Any help and suggestions appreciated.
Thanks.
 

A:USB mass storage device.

Read other 16 answers
RELEVANCY SCORE 78.4

Worked on USB device on Monday at home and it would let me save to and move files from the USB.Tried device on Tuesday on various machines (XP and 2000) but gat message "USB device not recognised". I have also tried on my home PC where it last worked. can anyone help with this problem I am not that technicial , so simple instructions would be best.Thanks
 

A:USB Mass Storage Device

first, what is the name of your device and what is it? does it have a write protection switch on it?

Hello and Welcome to Techspot
 

Read other 2 answers
RELEVANCY SCORE 78.4

On my tool bar at the bottom of the screen there is a safely remove hardware icon. When I select it takes me to screen that gives me 2 selections to safely remove hardware. One is my printer and the other is USB mass storage device. When I highlight either it shows me the device name again and says at location 0.
" HP Photosmart 3100 series at location 0"
" USB mass storage device at location 0"

Why is the icon there to give me the option of removal? Should I remove? What is the term "mass storage device referring too?

Thank you
 

A:Usb mass storage device

Your printer probably has a sdcard slot on it. You can remove the memory card from your camera and put the card directly into the printer and print pictures directly from it. No need to bother to remove it or shut it down.
 

Read other 2 answers
RELEVANCY SCORE 78.4

Where can i download a usb mass storage device/driver or how can i get it back on my pc? I believe i deleted it because i remember removing it from add/remove programs and now i can't see it in device manager.

Before and after i deleted it my Iomega External USB CDRW Drive has suddenly not been detected by my computer(was not detected even when i had the usb mass storage device so this is not why it's not being detected). While i was removing other programs that i thought might have been causing this i accidently deleted USB Mass Storage Device from Add/Remove programs and i believe that is a driver i need for my usb plugs to work. As far as the cdrw drive goes i have tried everything on the Iomega troubleshooting page except for one thing that involves the usb mass storage device but now i don't seem to have it on my computer and i was wondering if there was somewhere i could download it or how i would get it back.

A:usb mass storage device?

What make/model computer do you have?

Read other 3 answers
RELEVANCY SCORE 78.4

I recently bought a new Dell XPS 600 and after a few days it now shows four removable discs installed under my computer's "Devices with Removable Storage" section. I have no clue what these are... they are listed next to both my DVD drives as... Removable disk F:, Removable Disk G:, Removable Disk H: and Removable Disk I: Can anyone please tell me what these are? When i use the Safely Remove Hardware it shows these 4 together as USB Mass Storage Device. Thank You!

Sanfus Barron
 

A:USB Mass Storage Device???

Sounds to me like you've got a memory card reader on that machine...and or one built in to your printer.

patio.
 

Read other 4 answers
RELEVANCY SCORE 78.4

Hi All,

Been using the new Windows 7 for a week or so now, everything is great! But i have one big issue. Every time i plug in a USB pen drive or my tomtom device, a window appears with a message saying that the device drivers can not be installed. When i click on the ballon message it just displays the device followed by a red X and 'Failed'

I have tried many usb mass storage devices and i still have the same issue.

Can anyone help???

Thank you for your time.

Gareth

A:USB Mass Storage Device

Sounds like you have some issue involving "uppers filters" and USB ports and devices. Do any USB devices work well?

You could Google that and try to find an answer or how to edit the registry to repair it. I'd tell you but I forget where to look in the registry to do this.

In any case, if you attempt, set a restore point before.

Try a Windows Update while device(s) is/are attached. See if they need a drive letter assigned in disk management.

If not, pick your favorite one and right click on it in the device manager. Properties. Details tab. Change dropdown to hardware ids. Copy and paste results here. No screenshots as alternative, please.

Read other 9 answers
RELEVANCY SCORE 78.4

I am having trouble with my IPOD I was wondering if this error was the reason it wasn't working?
This is what error message comes up for the mass storage device:

Windows cannot load the device driver for this hardware because there is a duplicate device already running in the system. (Code 42)

Click Troubleshoot to start the troubleshooter for this device.
 

A:Mass Storage Device

I always reply to the head scratchers. Please un-plug/turn off all your USB devices EXCEPT the Ipod, your keyboard, and mouse. This includes your printer, and any Jump Drives you may have plugged in.

1.) Open your Device Manager
-Right click on my computer
-Select 'properties'
-Click the 'hardware' tab
-Press Device Manager

2.) Do you see your Ipod on the list? If so, uninstall your IPOD. I don't have an IPOD so i don't know what group it would be stored in, but I would assume your Universal Serial Bus Controllers.

3.) Download a new Ipod driver or load the Ipod driver off your cd like you did the first time you installed it.

I hope this fixes it.
 

Read other 1 answers
RELEVANCY SCORE 78.4

I recently lost my hard drive and had to rebuild from scratch. Everything works well with one exception. Whenever I plug my Olympus D520 camera into the USB hub (powered), windows says it sees new hardware and the promptly reboots. Upon the reboot, the camera is seen as a disk drive. Not liking how this worked, I then installed CAMEDIA 4.0 (Olympus Camera Product). Now when I plug in the camera, it still reboots but when the system gets nearly loaded it see's the camera as new hardware and reboots again. This will go on forever unless I unplug the camera, then the system boots nicely. Any ideas here?

Dennis
 

Read other answers
RELEVANCY SCORE 78.4

i have a Gateway 7803u notebook
WIndows 7 64-bit

specs are




Quote:
Processor Intel? Core?2 Duo T6400 Mobile Processor1 (2.0GHz, 800MHz FSB, 2MB L2 Cache)8
Operating System Genuine Microsoft? Windows Vista? Home Premium (64-bit) with SP12 Memory 4096MB 667MHz DDR2 Dual Channel Memory (2 x 2048MB Modules)9
Hard Drive 500GB 5400RPM SATA hard drive Color Premium Design with synthetic leather palm rest, black polished keyboard surround and deep, rich Jet Black finish
Wireless Network Intel? WiFi Link 5100 802.11a/b/g/Draft-N Wireless10
Adapter AC Adapter
Application Software Microsoft? Works 9.0, Microsoft? Money Essentials & Microsoft? Office Home and Student 2007 (60-day complimentary trial period)4
Battery 6-Cell Lithium Ion 48.84 Whr (2.2AHr)
Chassis Chassis with Intel? Graphics Media Accelerator 4500 with up to 1759MB of Dynamic Video Memory and Intel? GM45 Express Chipset9
Digital Media Software Microsoft? Windows Media Player 11, Cyberlink? Power2 Go?, & Cyberlink? LabelPrint?
Dimensions (Box) 13" (H) x 17" (W) x 6" (D) or 330mm (H) x 431.8mm (W) x 152mm (D) Dimensions (System) 1.3"-1.70" (H) x 15.2" (W) x 10.4" (D) or 33-44mm (H) x 387mm (W) x 264mm (D)
Display 16" High-Definition Widescreen WXGA Display (1366 x 768) True 16:9 Aspect Ratio11
Expansion Slots ExpressCard? Type 54 External Ports (4) USB 2.0, VGA Connector, HDMI V1.3 Connector
Keyboard and Mouse Full-Size K... Read more

A:Mass Storage Device

i also tried to reinstall the Intel_Matrix_v.8.5.0.1032_Vista_all drivers from gateway

they will install

i will restart, it will locate the drive as plugged into usb. it will show that its installing drivers

then said there was problem installing

and the yellow exclamation is back

Read other 9 answers
RELEVANCY SCORE 78.4

I plugged in my external Hard Drive (Laptop Hard Drive in a USB cradle) and it worked fine - Opend it up and browsed some files. I then a day later plugged it in and it asked for drivers, It searched windows update but did not find any. I cannot not access the drive although it worked first time.

Any ideas?

Thanks, John.
 

A:USB Mass Storage Device

are you plugging the external HD to a pc or a another labtop? did you plug it back into the same port as before.
 

Read other 3 answers
RELEVANCY SCORE 78.4

I am wondering if ti normal for me to have the green arrow icon in the start up corner of my desktop I am talking about the icon which when I place my mouse cursor over it "safely remove hardware" . i do have an external drive connected by a USB but it is turned off and the icon remains even when I unplug the USB cable.

A:usb mass storage device?

I think as long as you have anything hooked to USB you will have that. I have 2 printers and a scanner hooked USB and the icon is always there...

Read other 1 answers
RELEVANCY SCORE 78.4

When I insert the Micro Sd card into the USB adapter and insert the adapter, the Explorer sees it as a Removable Disc (F)
then asks me to insert a disc, or format a disk.  The device driver through control panel shows USB Mass Storage Device, and the driver is working properly.

It worked properly earlier in the day, but now it doesn't.

Read other answers
RELEVANCY SCORE 78.4

hi, recently my creative zen has died. i believe the problem is the unit and not the 40gb fugitsu hard disk. i really need to recover my music as i am living in europe and my cd's are back in australia. i had 25gb of mp3's on there... i have just bought a hard drive housing and placed the hard disk from my mp3 player into that hoping i would be able to recover my files. my computer recognises the usb device, recognises the hard disk type and model no. , but says that it is not initilized. when looking at the properties of the drive it recognizes the size but not the partition style etc. im wondering if this is because my mp3 player has its own way of accessing the disk and windows xp doesnt recognise the format style??? i dont know much about this stuff and really would appreciate any help with it..

cheers
josh
 

A:mass storage usb device

Josh,

Yes I am guessing, but from what you are saying, it sounds like Creative has its own proprietary disk format?

Have you tried contacting them thru their Website?

Do you know anyone with a similar unit that would let you install the drive to off load the music files?
 

Read other 3 answers
RELEVANCY SCORE 78.4

Hi,
am using Transcent 2GB pendrive.
now my pendrive does not detect in my computer. its LED blue lights blinking.
But does no detection.
I try to uninstall and reinstall this device via device manager and add hardware. no use.
It shows "The deive cannot start (code 10)"
How to solve the problem.
Thankx to all.

A:USB mass storage device:

Can you test the device in another computer? Sounds like it might be broken

Read other 1 answers
RELEVANCY SCORE 78

In Device Manager, there is a USB Mass Storage Device or an Unknown Device, even when there isn't anything plugged in. This is occurring on a Dell Dimension 5100. This is not the pc in my system specs. How do I fix this?
Here are some Device Manager screenshots:

A:USB Mass Storage Device/Unknown Device

The PC is unplugged from power (with all USB devices unplugged, as well as the DVI and ethernet cables) and the CMOS battery is removed.

Read other 9 answers
RELEVANCY SCORE 77.6

My 4 gig Super Talent flashdrive works fine on other computers, and it USED to work on my Windows xp, but suddenly it wants me to "install" it using the Hardware Wizard. And when I do try to install it, it gives me this message:




I STOPPED Installing, because i was scared.

I've had this flashdrive for seven months and it never showed me that message the very first time I plugged it in on my computer. It was instantly recognized and it worked great.
But that message started showing up after I installed the Logitech Camera driver for my webcam.My flashdrive wont show up in "my computer" and "disc management" anymore, but it shows on device manager as "usb (with yellow exclamation point) And when I try the "Safely Remove Hardware" before plugging it out, the "mass storage device" is not even there as if my flashdrive is not even plugged.
I tried unplugging the webcam, then plugging the flashdrive then rebooting, I even unplugged my keyboard, but nothing seems to work.I tried every USB ports on my computer too.

Im thinking of uninstalling the webcam driver, but i also need the webcam.Is there anyway that i could make my flashdrive work with my webcam, if not together, then at least when my webcam is unplugged?

Please help I really need my flashdrive to work again on this computer.

A:USB Mass storage Device problem

Plug the Flash Drive in if you get the Hardware Wizard, let it install. If you do not get the hardware wizard and the device is not listed in My Computer, then go to Start/Run and type devmgmt.msc and hit enter. In the Device Manager, expand Universal Serial Bus Controllers, if you have a Unknown Device, then right click it and uninstall it. Now pull the drive out and put it back in. Go through the hardware wizard if asks.

Read other 2 answers
RELEVANCY SCORE 77.6

I’ll try to keep it short as possible. Been reading the do’s and don’ts most of the day and made it a long way through the elephant in the room post. Already knew the do's and don'ts but wanted to make sure. Haven't been here in a while.
 
One problem - got a few more, slow of course - I can barely write this.
 
Each time I reboot my pc, I get an icon in my systray to remove new hardware. This I really only noticed today so I don’t know if it’s always been there - 2nd/extra computer, desktop/changing to Windows 7 I hope with your help.
 
The message: USB Mass Storage device - Drives -(F; G:, H:, I:,)
Not even sure I have all of those..
.
Second problem, only mention it here because it might be realted. I bought this computer used. It’s obvious that he tried to clean out his data first and most likely got more than his data or it had a bad effect. From the first time it was started a pop-up says:
 
"WELCOME TO THE FOUND NEW HARDWARE WIZARD! (You lucky JERK!) "This wizard helps you install software for: PCI device".
 
Tried the wizard a few times - Windows can’t find the software. I don’t have a disk that it will take either. I just close it but it pops back up every few minutes. Have no idea what it wants or what a PCI device is to try tracking something down.
 
HP Pavilllion a630n
MS Windows XP Home Editiion Service pack 3
Intel Pentium 4 CPU 280 GHz, 503 MG
Intel 82516 Express family Chipset.
&... Read more

A:USB Mass Storage device - Drives -(F; G:, H:, I:,)

to Bleeping Computer forum.
 
 

 
The message: USB Mass Storage device - Drives -(F; G:, H:, I:,)
Not even sure I have all of those..

 
According to the official specs ( http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c00210099 ),your PC seems to have come with USB card reader. XP will show the "Safely remove Hardware" message if there is a card reader is plugged so there is nothing wrong with that.
 

 
 
ried the wizard a few times - Windows can’t find the software. I don’t have a disk that it will take either.
 
To identify the device with missing driver, please follow the below steps.
 
1. Open RUN dialogue ( Win key + R ) and enter Msinfo32.exe in it.
 
2. When the "System Information" tool opens, choose File -> Save and give a name a name of your choice. 
 
3. Download and install 7-Zip from http://downloads.sourceforge.net/sevenzip/7z920.exe
 
4. Now right click on the saved file and choose  7-zip --> Add to archive. This will compress and considerable reduce the file size.
 
    
 
5. Attach the file using More Reply Options --> Attach files with next reply.

Read other 15 answers
RELEVANCY SCORE 77.6

When I connect a flashdrive to the pc the pc shows that it found hardware and the hardware is installed.I can however not access the drive because it is nowhere to be seen.
In device manager the drives are also shown and it says that it is working fine.I can click on the "safely remove hardware" button and then it stops the harddrive but there is no place I can get access to the drive.
 

A:USb Mass Storage device is missing

Read other 8 answers
RELEVANCY SCORE 77.6

Went to Device Manager, noticed USB controllers was opened and the USB mass storage device was highlighted. Went in the properties, this message was waiting for me, Code 47, Windows cannot use this device because it has been prepared for safe removal, but has not been removed? (There is no device installed in any of the ports etc.) To fix the problem, unplug device from computer(What device) and plug it in again.? All drivers are up to date as I checked them just now. The driver is from the 2006 year and when asked if I wanted windows to check, did so and found no new drivers. Kasperski has a driver on it more updated but since it is not signed I guess it won't install it. Did everything to try and install Kasperski's driver but to no avail. Also did the check for solutions but got no where, on line or off. Anyway, do use a 2 g storage device but always use the uninstall mass storage device when removing. Not a problem cause it does work with the device, just wondering if you can uninstall it and reinstall the driver under driver details or the uninstall as soon as you click on the USB mass storage device. Is this actually on the computer or is it the mass storage device I plug into the usb port?
 

A:USB mass storage device driver?

Read other 6 answers
RELEVANCY SCORE 77.6

I recently purchased a new digital camera. I brought it home, connected it to my computer by USB, and followed the instructions to upload the pictures to my PC. I had some difficulty realizing that my computer actually recognized it as a mass storage device, but eventually it worked. I was very happy.

Less than a week later I had some more pictures I wanted to upload. I connected the camera to the computer and nothing happened. The camera did not respond (it essentually turns off while connected to my computer), the E:\ drive did not show on My Computer, and when I opened up the software I use to upload the pictures, no mass storage device was detected as being attached to my PC.

I didn't install any drivers for the camera, so there really isn't anything to re-install. It's like the computer is completely unable to realize anything is connected to it. I've tried uninstalling/reinstalling my USB root hubs, editing registry keys (http://support.microsoft.com/default...;en-us;314634), uninstalling the uploading software (hey, it was worth a shot), restarting my computer a million times, plugging the camera into different ports (I read that plugging something in to the ports on the back of my PC that are connected to the motherboard directly would do the trick--this just caused a power surge and froze my PC), and performed an exorcism.

My Device Manager doesn't show anything at all as being connected to my computer. The E:\ drive doesn't show up. Nothing.

I have a W... Read more

A:XP not detecting mass storage device

The fact that your PC froze sounds like a bad cable. The only other logical solution is a bad camera port. Take it to a Drug store self service photo booth & see if it works there. Many give the option of inserting the memory card or the USB cable.

There is probably nothing wrong with your PC.

Read other 2 answers
RELEVANCY SCORE 77.6

I have a portable burner but can't find D drive. I opened the mass storage case earlier and disconnected the burner. To my amazement it worked, D drive was back. Not for long as soon as I rebooted it was gone again. I have the same problem with the laptop.Both computers have worked with it in the past. I can see the mass storage in device manager under USB ports but can't find the burner. I have recently reinstalled XP,but only on the desk top computer.This is the computer I have been using it with.Somehow during or after the install the burner in the tower and the portable burner traded drives.I hope someone can help.It's all pretty new to me but I'm learning to love playing with them.
 

Read other answers
RELEVANCY SCORE 77.6

I have assembled a SOYO Dragon 2 v2 with 1 gig mem, SATA Western Digital HD, 2 IDE DVD/CD roms,. device manager shows 2 mass storage controllers under "Other Devices". the 2 Disk roms, and the SATA HD are listed correctly in device manager. My SOYO board has 4 IDE connectors and 4 SATA connectors, should I just delete the other devices and reboot the system or disable the other controllers in BIOS?

Thanks for any assistance
John

A:Dev Mangr, ?mass Storage Device?

Have you got the latest drivers for your motherboard? It sounds like Windows hasn't found drivers for the controllers.

Read other 2 answers
RELEVANCY SCORE 77.6

Can someone please help me.....

I have data on several USB Hard Disks that I have used as backups. When I plug these into a new machine with Vista Ultimate 64 bit, Windows is not able to find the drivers for this.

These are not new-fangled devices - they are even recognised in Win98.... (many years ago!)

Windows is not able to find the drivers even looking on the internet.

Please help!

Thanks

A:USB Mass Storage Device not recognised

i have found if you turn off puter and plug it in another usb slot then boot up it will usually find it and work

Read other 2 answers
RELEVANCY SCORE 77.6

Hi...is there any software I can download, purchase, etc..that will enable me to repartition my mass storage device. It is a "G" and I want to divide it into "f" and "g" let's say. All of the software I have been able to locate allows partitioning of the Hard Drive only and not for peripheral mass storage. My computer is running XP professional.

Thanks
 

A:partitioning a mass storage device

Read other 6 answers
RELEVANCY SCORE 77.6

I’ve been busy with my computer. In the last week I’ve installed new monitor, have had to take out my AGP 8x card and put it back in and I’ve had to take my PC2700 512mb stick of RAM out and put it back in.

So I might have jostled something in my computer.

I have three drives on my computer, a WD 20 IDE drive in C (win98se), a 40GB Seagate IDE in D (WinXPsp2), and a USB mass storage device. The USB device is 250 GB.

My USB device has three partitions, G, H, and I.

I’ve noticed in the last couple of days some knocking coming out of my usb drive. So I’ve taken it out and put it back in. It is connected to my computer via a USB to IDE cable.

Usually this does the trick but today I had some really bad knocking. I took it out and rearranged the power supply wires.

Now my usb device doesn’t show up at all on my computer.

When I am in Win98 and plug the usb cord in, it tries to show up but I get a yellow dotted line at the top of my computer screen and then it reboots.

When I plug my usb device in WinXPsp2 my computer automatically reboots.

My usb drive is less than a year old. I purchased it in December from Tiger direct. I also purchased a three year extneded warranty. It is a WD Caviar 250.

It seems to early for the drive to wear out.

Also, something else: When I reboot my computer I see the notation on my DOS screen

USB to Atapi Bridge

I used to see

USB to Mass Storage Device.

Also, my Device Manage... Read more

A:Problem with USB Mass Storage Device

Read other 14 answers
RELEVANCY SCORE 77.6

I have a computer that is installed Win7 pro SP1, It unable to recognized USB flash recently (all USB ports).
I found the USB keyboard and mouse are work fine after testing (all USB ports) , but USB flash & card reader & hard disk & DVD rewritable drive are all unable to recognized.

Take these USB devices that unable to recognized to another computer to test and result is: they are all fine.

These USB devices that unable to recognized will show under Unknown Device in Device Manager,
but I found USB Mass Storage Device will not show under USB in Device Manager.

I once tried the following solution, but all unable to solve this problem.  
1. Remove Unknown Device in the Device Manager then search again. It's invalid.
2. Remove all USB2 Enhanced Host Controller under USB in the Device Manager then restart. it's invalid.
3. I once suspected USB Mass Storage Device driver was crash. so I copy windows\inf\usbstor.inf & usbstor.pnf and windows\system32\drivers\usbstor.sys from aother computer (same OS) into to this computer. It's invalid.
4. I suspect it's USB Mass Storage Device set to deny access. Check privilege of windows\inf\usbstor.inf & usbstor.pnf, but they have not been changed.
5. same suspect USB Mass Storage Device set to deny access. Check Removable disks: deny execute access & deny read access & deny write access in Group Policy Editor, but they are not configured.
6. same suspect USB Mass Storage Device set to deny acc... Read more

Read other answers
RELEVANCY SCORE 77.6

It has been  quite some time since I have had any issues but I have another one you may possibly assist me with...
 
It has to to with my USB Mass Storage device that shows a code 52 not digitally signed. Been all over the web. What a mess of suggestions! Tried updated everything, Deleted and reinstalled....still the same problem. Checked Windows and HP (sigh) still no solution. 
 
Please do you have any solutions or good advise? 
 
 

A:USB Mass Storage Device Code 52

See http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/error-code-52-usb-ports-not-recognizing-connected/2379017c-d513-478c-a184-0d1b7cd408b2 .
 
Louis

Read other 3 answers
RELEVANCY SCORE 77.6

I just purchased an Sandisk MP3 Player for my daughter. When I connect the player to her PC, I am prompted to load the drivers (which I have done at least 5 times now) but the device does not then appear to be recognized by her system. It does not appear as a device in My Computer or in Windows Media Player. She has a eMachines T3990.

I did some research and found the MTP Porting kit on the MS web site. I downloaded it but it made no difference.

For comparison, I connected it to my wifest PC (eMachine T3624). It prompted me to install the drivers and once I did, I could sync it with Windows Media Player and it shows in My Computer.

I talked to Sandisk and they told me to reinstall WMP v11 which was already on her machine but I did as requested and it made no difference. My wifes PC also has v11 (exact same version on my daughters pc).

Next, I reviewed the USB serial buss controllers in Device Manager. My wifes pc had two entries: USB Mass Storage and USB Composite Device that were not showing on my daughters PC. I copied to two drivers and was going to load them on my daughters pc until I discovered that the drivers were already on her pc -- same size and version.

The MP3 Player requirements state USB 2.0 but I'm not sure that I have that version on either of these two pc's. They are less than 3 years old. I'm not sure how to determine the version.

I am stumped. Is there some way to force all of the USB drivers to load again?

I would apprecia... Read more

A:USB Mass Storage Device Support

I wanted to add that I get a message that the MTP drivers are not Windows Signed and have not passed Window Logo testing. This is awfully odd in that the drivers (MTP Porting Kit) came directly from MS.

Read other 1 answers
RELEVANCY SCORE 77.6

Hey All,

On my new build (Foxconn G31MXP-K; 4 GB RAM, Pentium Dual Core 2.5GHz) USB drives cause issues.

I've tried three different flash drives and a portable hard drive and have gotten the same result with all of them on both Windows XP and Windows 2000.

When I plug the drives in, they take a very long time to install, then appear to install successfully. On Windows XP, trying to access the drive after it installs would result in explorer locking up. In 2000, it results in an error saying "the disk is not formatted, format now" then when I accept to format the disk: "The disk cannot be formatted"

FWIW, I had started with JohnWill's USB repair technique (registry edit, removing all usb controllers, drives, etc, and reboot twice) but it had no affect on 2000 or XP's situation.

I have absolutely no idea what the issue is. I've got all the chipset drivers installed, and it just won't cooperate. USB is fine with the keyboard and mouse, but it seems as though everything else fails miserably.

Any ideas at all will be appreciated.

Thanks,

Joe
 

A:USB Mass Storage Device Issues

Read other 16 answers
RELEVANCY SCORE 77.6

Hi,

I have a 80gb brand new ipod and it works on my friends computer but simply doesn't register on mine in windows or in itunes. This is def a windows problem as i have also recentrly bought new usb ports to double check it wasn't that. Can anyone suggest any settings i can fiddle with to get this thing working?

My setup is as follows:

vista 32bit
conroe e6300
2gbram
160gb HDD
esata2 conroe xfire mobo (asrock)
80gb ipod classic
usb 2.0

I would be grateful as i've tried alot!!!
 

A:Mass storage device not recognised

can anyone suggest anything please?
 

Read other 1 answers
RELEVANCY SCORE 77.6

Hi,
I am using Nokia Lumia 920 phone which is have windows 8.1 in it. Recently due to uninstall of one my app i lost its backup too. I want to retrieve my backup form the phone. But to my recovery tool its not detecting as a mass storage drive. Can you please let
me know how can I make my Lumia 920 as a mass storage device to recover data using my recovery too

Read other answers
RELEVANCY SCORE 77.6

My laptop, win xp ( Home) sp3, of late has a problem.

Whenever I insert a new device such as a card reader, into the usb port, after it is

detected, and the software (usb mass storage device) starts loading the driver, I then

received the following error message:

'The software you are installing for this hardware: USB Mass Storage Device has not passed Windows Logo to verify its compatibility with windows XP. Continue your installation of this software may impair or destabilize the correct operation of your system either immediately or in the future. Microsoft strongly recommends that you stop this installation now and contact the hardware vendor for software that has passed Windows Logo testing.'

Two options are then presented:

Continue Anyway or Stop installation
If I choose continue, the device will have a Yellow and ? Mark as an unknown device on the Device Manager.

I do not have any problem with this card reader on my other win xp sp3 computers, and I have used the same card reader with this computer for years without any problem.

Any advice would be appreciated.
 

Read other answers
RELEVANCY SCORE 77.6

Good day guys

The pc's at my local library keeps hiding all data on any mass storage devices connected to it and creating broken shortcuts off all data on the data on any mass storage device connected to it. Any other computer is then unable to view data on the mass storage device.

I can recover my data easily and I have put on a warning script on the library pc's to warn people of the problem. Locals using these pc's are in danger and I do fear someone would come in and try to use an external hard drive disk.

My question is: What is wrong with these pc's and how do I fix the problem?

Thanks for the help
 

A:Mass storage device malfunction

Read other 7 answers
RELEVANCY SCORE 77.6

Hi,

I have a 80gb brand new ipod and it works on my friends computer but simply doesn't register on mine in windows or in itunes. This is def a windows problem as i have also recentrly bought new usb ports to double check it wasn't that. Can anyone suggest any settings i can fiddle with to get this thing working?

My setup is as follows:

vista 32bit
conroe e6300
2gbram
160gb HDD
esata2 conroe xfire mobo (asrock)
80gb ipod classic
usb 2.0

I would be grateful as i've tried alot!!!
 

A:mass storage device problem

Read other 8 answers
RELEVANCY SCORE 77.6

Hi
I have an Easydisk 512MB USB flash drive which functions on my W2K PC at work (and several other PCs) but not on my Windows XP PC at home.

When I plug the device into the home PC I get a notification that new hardware has been detected and after a while (about a minute - which is obviously too long) the device gets a drive letter assigned (in this case F).

However, when I click on the F drive icon, I get the message "Please insert a disk into drive F".

My home PC has all the critical updates and SP2.

I have a feeling the device may be USB 1.1 - but surely this should still function?

I tried another approach and connected the USB flash drive when the PC was switched off. I booted the PC and once logged in it detected new hardware, it also stated that it was a USB 2.0 device (though I am not so sure). Once it was installed it asked me to reboot (which is odd). I did this and when I clicked on the F drive icon after reboot it still came up with the same error message as above.

There are no errors in device manager.....

Any help would be greatly appreciated as this is driving me nuts!!

Thank you

hillsa
 

A:USB mass storage device not functioning

You may want to move or copy all your files on the drive to your W2K machine, then plug it into the XP machine. You also might want to look for drivers for it, but XP should be able to detect it.
(I have a SanDisk 256MB and it works fine on XP)

Welcome to TSG
 

Read other 3 answers
RELEVANCY SCORE 77.6

Hello everyone.

I have a PC with Windows 7 Professional 64-bit installed. My problem is that with some usb devices I get an error 28. These devices are working on other PC. For example I have 2 usb sticks 16gb. The one is working fine, and the other has an error 28.
I searched for viruses with Microsoft Security Essentials, Malwarebytes and combofix and nothing was found.
Tried system restore, and also shut down the PC and disconnected it from power supply, just to discharge the capacitors. But still the same.

A:Mass Storage Device error

I run for a second time Malwarebytes, it found more things to delete and then everything was working.

Read other 1 answers
RELEVANCY SCORE 77.6

Hello.
I do have a problem with Mass storage device usb driver and precisely with an iPod Classic 80Go.I tried everything but I always have the problem only on my computer;It detects the iPod as an amovible disk but iTunes doesn't detect it and its content is unreachable.

A:Mass storage device usb driver

Try reinstalling iTunes since iPod drivers come with iTunes, It may not be properly installed.

Read other 2 answers
RELEVANCY SCORE 77.6

Hello, everyone =)

OK, well, I've got an external hard drive that I'm connecting to my USB port. I can mount it just fine in linux (mount /dev/sda1) but in Windows XP Pro, it appears in the system tray as a "USB Mass Storage Device" but I can't seem to access it from "My Computer" in any way. I'm a Linux user who is rather new to Windows, but I still have a feeling that this is not my own problem. Anyone have any ideas of what is going on?

Thanks in advance
 

A:Windows XP Pro not seeing a USB Mass Storage Device

You may not have a windows filesystem installed on the drive yet. If that's not the problem, try this fix:

Unplug ALL USB devices.
Open Device Manager.
View, Show Hidden Devices.
Uninstall all devices under USB Controllers.
Uninstall all devices under Storage Volumes. Say no to any reboot prompts until you are finished. Also, if a Storage Volume doesn't uninstall, ignore it and move to the next one.
If you have a yellow ? with unknown devices, uninstall all of the entries there as well.

When this is done, reboot TWICE.

Reconnect the USB devices and see if they're recognized properly.
 

Read other 1 answers
RELEVANCY SCORE 77.6

hi,

I'm using one of those pen drives(lexar 64mb jump drive) that plugs into a u
sb port. Only the other day, after my computer crashed, the device now fails
to work. It appears in device manager but says that 'the device cannot star
t(code10)' and i can't access it in explorer. I've tried it on a pc with win
98SE and xp and neither works.

And yes, i've tried re-installing the drivers (thanks lexar tech support for
that sage advice). Has anyone else had problems like this? It was work fine
before now and other than the PC crashing i can't think what could have hap
pened

any ideas?

Andy

ps all i really want is the data off the thing! (i know i should have backed it up :-( )
 

A:usb mass storage device problem

Read other 10 answers