Over 1 million tech questions and answers.

Ideapad Z710 - No Secure Boot Option in BIOS

Q: Ideapad Z710 - No Secure Boot Option in BIOS

I am not able to boot from usb because of security options.Solution would be to switch off security boot in bios, but this option is not available.Bios is up to date.Thanks in advance!

Read other answers
RELEVANCY SCORE 200
Preferred Solution: Ideapad Z710 - No Secure Boot Option in BIOS

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

RELEVANCY SCORE 102.4

I can not find the Secure boot option in my bios although it is uptodate. Can anyone confirm the option exists on a Ideapad Z710?

Read other answers
RELEVANCY SCORE 83.2

no csm option after disabling secure boot and setting up supervisor password. asus e402na. bios version american megatrends 306.

I need your help because no csm option only fast boot on boot tab.
 

A:bios problem no csm option after disabling secure boot

also i would like to downgrade windows 10 to windows 7 but the installer is stucked up on windows logo. maybe if the csm option will appear then i could clean install windows 7.
 

Read other 1 answers
RELEVANCY SCORE 79.2

Does anyone know how to update the BIOS on my computer i have a boot loop problem and I cant fix it.

Read other answers
RELEVANCY SCORE 78.4

Hi All! I have Lenovo IdeaPad Z710, old BIOS and Windows 10How can I upgrade it to a new one now?Lenovo Vantage does not find the update, the site has an update - Update BIOS for Windows 7 (32- and 64-bit versions), Windows 8 (32- and 64-bit versions), Windows 8.1 (64-bit) - Lenovo Z710 7FCN96WW can it be installed from under 10?

A:IdeaPad Z710 BIOS update from Windows 10

Yes, you can install version 96 from windows 10.  Download the update from your support page. Readme:https://download.lenovo.com/consumer/mobiles/7fcn96ww.txt I would not update the BIOS unless you find a change in the readme that is needed on your machine. 7FCN96WW Modified: 1. Correct Intel 3160-AC WLAN combo card SSID.7FCN95WW Modified: 1. Support Intel 3160-AC WLAN combo card. 2. Fix the S3 LED abnormal issue.

Read other 2 answers
RELEVANCY SCORE 78.4

Hi All! I have Lenovo IdeaPad Z710, old BIOS and Windows 10How can I upgrade it to a new one now?Lenovo Vantage does not find the update, the site has an update - Update BIOS for Windows 7 (32- and 64-bit versions), Windows 8 (32- and 64-bit versions), Windows 8.1 (64-bit) - Lenovo Z710 7FCN96WW can it be installed from under 10?

Read other answers
RELEVANCY SCORE 76.8

Hi. I got my hands on an Ideapad Z710 with a broken LCD screen. 1. Does anybody know how to display the boot process on an external screen?2. Is it possible to find some documentation or manual over the UEFI/BIOS menues?  Best RegardsMats

Read other answers
RELEVANCY SCORE 75.6

I'm trying to Install Debian GNU/Linux on my Windows 8 Ideapad Z710, and I can't even get my laptop to boot from external media. From the InsydeH20 Setup Utility, I've so far disabled Secure Boot, set Boot Mode to UEFI, enabled USB Boot, enabled PXE Boot to LAN, and set my EFI boot order to 1) EFI Network 0 for IPv4, 2) EFI Network 0 for IPv6, then 3) Windows Boot Manager (no other options). I'm not actually trying to boot from a network, I just want to boot from the onboard DVD drive or my USB DVD drive. When I boot with these settings, I get the error: EFI Network 0 for IPv4 (...) boot failed, then a similar one for IPv6, then it boots to Windows. Why can't I boot from DVD or USB? Another thing I've tried is setting Boot Mode to Legacy Support and Boot Priority to Legacy First (with Secure Boot disabled) which results in my laptop booting to straight to Windows even when USB ODD is first in the boot order. Please tell me how to boot to a Linux DVD or USB on this machine! This was major purchase for me, and if I can't install Linux on it, this laptop is totally useless for me. Please respond.













Solved!

Go to Solution.

A:Can't boot from disk or USB on Ideapad Z710

Please can anyone help? I just want to boot from a USB or DVD. Is it possible on this machine? I'm willing to do whatever it takes to get this to work.

Read other 5 answers
RELEVANCY SCORE 75.6

Hi! When I start my laptop, I get this message "EFI Network 0 for IPv4 (54-BE-F7-53-1F-14) boot failed". The laptop is 4 months old. How would I get it to work again? pls!

A:ideapad z710 boot failed

Hi,
 
Welcome to Lenovo Community Forums!
 
I?m sorry to hear that your Z710 Laptop is not booting to Windows and displaying initial error, I suggest you to access the BIOS menu and change the first boot device to HDD (Hard Disk Drive) and check if the issue persists. To access BIOS menu turn OFF the computer and then press the NOVO button which is located beside the power button and select BIOS utility, then under boot menu change the HDD to first boot device under boot order. Now click on F10 to save the changes.
 
Do post us back if the issue persists
 
Best Regards

Shiva Kumar






Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Follow @LenovoForums on Twitter!

Read other 3 answers
RELEVANCY SCORE 74

I bought a new SSD and put it on the HDD place and put the HDD instead of the optical drive.Everything works perfectly only at start of the computer every time the lenovo logo loads and then restarts and shows the logo again in an infinte loop. Until I pres fn+f12 and enter the first option which is boot manager sdd.I tried to reinstall the windows it doesnt work.

Read other answers
RELEVANCY SCORE 66.8

Hello.I cannot find something like that in the BIOS.But actually the CPU (AMD APU Kabini, A4-5000) supports virtualization.So did I miss this option or BIOS does not contain it?Thanks anyway.













Solved!

Go to Solution.

A:IdeaPad S215 and AMD-V option in BIOS

hi DreadDendy,
 
Welcome to Lenovo Community Forums!
 
Can you check under Configuration TAB inside BIOS
   Check if you have Virtualization technology option, normally has options for Enable or Disable.
 
If it is not under BIOS option then most likely the Feature is not support by the Motherboard.
 
Best Regards
Solid Cruver





Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Follow @LenovoForums on Twitter!

Read other 4 answers
RELEVANCY SCORE 66.8

Thanks in advance all.. I'm trying to install Windows 10 on my old Inspiron with Phoenix Securecore tiano.  Secure boot options is missing.  Any thoughts or help?  This is a brand new hardrive.

A:No secure boot option in setup

Secure Boot requires UEFI -- and therefore a relatively new system.  If the system is in legacy mode -- or old enough to be BIOS-only  (no UEFI), secure boot cannot be used.  The disc must also be in GPT format.  What model system is it?

Read other 1 answers
RELEVANCY SCORE 66.8

i am trying to load new o/s but i cannot boot through cd rom or through usb drive. while i press f9 i didnt find cd rom option so plz hepl me

Read other answers
RELEVANCY SCORE 66.8

I have a HP Pavilion 15 laptop, I am trying to setup the secure boot option, I managed to enable the legacy support, but for some reason the secure boot option is greyed out, please advise  Spoiler (Highlight to read)secure boot option grayed outsecure boot option grayed out

Read other answers
RELEVANCY SCORE 66.4

My girlfriend's lenovo ideapad Z710 won't boot up past the Lenovo splash screen. She turned it on this evening and it just keeps refreshing to the Lenovo splash screen. She can't access the bios as far as I know, and she tried the CMOS battery thing as far as I'm aware and that didn't work. It won't boot into the OS and just keeps refreshing to the Lenovo splash screen. Any help would be appreciated. it's a fairly old laptop but it's needed and we can't seem to get it to boot up again. 

Read other answers
RELEVANCY SCORE 66.4

I've reinstalled my windows long time ago from 8 to 10. Now the booting/windows starting time takes more than 5 minutes.And I get a second logo at the windows boot, as well as some lag/stutter before i login and enter my password.I might have not installed/reinstalled the windows correctly or not installed it on the SSD or whatever the drive is called for my windows to load at proper speeds.I've been struggling with this for a while and I really need help it really is a pain for a windows to load for 5 minuteson each restart or windows start up...And if its possible id love not to reinstall my windows again, if its possible to move it to the SSD that be great.But...There's another problem, I don't see any SSD on my pc, i might have removed in on install, im not sure about that.When I bought this laptop the boot time was unter 10 seconds.My Bios Mode is Legacy can it be that and can someone tell me how to fix that?Ill provide some screenshots of my drives/system and if anyone can help me it will be much appreciated.

A:Lenovo Laptop Z710 Slow Bios Legacy Boot Time - Can't Change To UEFI.

I tried booting on UEFI and it failed.EDIT: So i found a solution that I havent tried it yet this is it:Enter to the BIOS:1st step: go to bios -security -disable secure boot then2nd step (this wont appear if you dont do the first step) -Advance Tab -System configuration -Change Boot mode from UEFI Boot to - CMS Boot -Save settings and reboot.-Install new fresh OSThis last step is to install a fresh OS which i do not want to do yet.When i try to switch my bios to UEFI from LEGACY i get this error.

Read other 2 answers
RELEVANCY SCORE 66

My daughter was using the above PC the other day, when suddenly it would no longer boot.

I've now tried to do a system restore to a backup I did a few weeks ago, but the system is reporting that the computer is using BIOS, but the backup was done with EFI

Unfortunately, on the bios settings page, I don't have secure boot listed under security.
In addition, on the system configuration page, the computer is listing the BIOS as being CSM mode.

Worse, there is no option to change that mode, as I can't select that entry.

I've now cleaned my hard disk partition, and done a system restore from the recovery media I created, but it still hasn't helped.

This poster [has a similar problem it appears|http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=311568&#311568]

How can I reenable UEFI Boot/Secure boot? There must be a way.
I spent an hour on the phone with "Toshiba Expert Care", and they've now suggested I have a hardware fault.
I'd happily replace the SSD, if I thought that would fix the problem, but it looks like the problem is elsewhere.

A:No Secure Boot Option on Portege Z930-138

Furthermore, If I choose Refresh my PC after booting to my recovery stick, I get
"The drive where Windows is installed is locked. Unlock the drive and try again"

The drive can be read when booting to a command prompt, so I'm not sure which drive is being referred to here.

Read other 3 answers
RELEVANCY SCORE 65.6

Message on PC appeared to be hijackware. I shut down and am trying to boot to Kaspersky DVD rescue disk.Followed instructions according to http://support.hp.com/us-en/document/c03659945Disabled Secure Boot, shut down, restarted; new boot menu only shows windows boot manager options.what to do!

Read other answers
RELEVANCY SCORE 65.6

Helloto the point: i want to underclock the speed of memory from 1333 to 800. But to do that, i need to go into BIOS Advanced option (chipset) and here is the problem. There is no advanced option in my BIOS version 3.7 in my Z500 ideapad. Is there any chance of getting there ? Or this option is locked ? 

Read other answers
RELEVANCY SCORE 65.2

Hi all, I updated my laptop months ago to windows 10 from windows 7 and now wanted to double boot ubuntu along with windows 10. While trying to disable the secure boot option inorder to boot the linux, i saw tat the secure boot is missing and even the PXE boot capability option is missing and the only options that is remaining is cd-rom boot and internal network adaptor option are shown.  and I dont even want to reinstall windows 10 or go back to windows 7 as there are lot of files which might get effected in the process. So is there any other way how I can resolve it???? 

A:Don't have secure boot option in boot option

It is an Intel Core 2nd generation and the motherboard may not support secure boot which is consistent with its being a native Windows 7 machine. Have you tried to install Ubuntu and run into issues or you are just anticipating them? 

Read other 3 answers
RELEVANCY SCORE 65.2

Can anyone tell me if you can disable secure boot in Win10 for Inspiron 3847?

Read other answers
RELEVANCY SCORE 63.2

Hello there, I have a Lenovo IdeaPad 320-15ABR. I wanted to install Phoenix OS (3rd Party Android os) to dual boot, the problem is I get an error when trying to boot into that OS and according to the devs I'm supposed to disable secure boot, but when I go into the BIOS settings Secure Boot is greyed out.

Read other answers
RELEVANCY SCORE 63.2

Hi,I tried to disable secure boot option but this option is not showing on my bias setup.How can I find the secure boot option or can disable it?

Read other answers
RELEVANCY SCORE 63.2

Hello,My model: Lenovo Ideapad 700-15Is there an option to somehow fasten the boot process? I specifically mean moments before windows loading screen. It takes like 20 sec and right now it's much more slower than my old Lenovo-B590. When the windows logo is appearing everything goes in similar speed. I was looking in my bios for any kind of quick boot and memory check turn off option, but no luck. I have the newest BIOS version.Can you help me out with this? ThanksMichal

Read other answers
RELEVANCY SCORE 62.4

Hello, I've been trying to gain access into my laptop after installing SteamOS for awhile now, but now I'm in this sort of secure boot loop. I'll go step by step in what happened. May laptop was using Windows 10 prior to this problem 1. I installed the SteamOS files and then unpacked them into a USB flash drive 2. I went into the BIOS by Settings > Update & Security > Recovery > Restart Now and then entered firmware. There I disabled secure boot. 3. I then booted the USB and installed SteamOS. After that, I restarted the laptop and went back into the bios and put secure boot back to enabled. 4. Now I'm unable to boot my hard drive or USB. Every time I try to boot up, it says something along the lines of "Unable to boot because of secure boot policy". How do I get out of this limbo?

Read other answers
RELEVANCY SCORE 62

Dear all, I have Ideapad Z710 with a specifical problems. When I turn on laptop my cooler goes frantic 139 % rpm. After trying installing different OS (Windows 7, 8.1, 10) Fans never shuts down nor I can make him slowdown with some softwares, tried (notebook fan control, speedfan). I cannot see fan options except fan speed in any of those programs. Also I cannot install drivers for my second graphic card 740m as it states that graphic card isnt available at all. And yet I see it on board and it worked until these problems with fan came up. I have been looking for the solution all through the internet and forums tried many of the solutions but nothing worked for me. Can anyone help ?

Read other answers
RELEVANCY SCORE 62

I had to buy a new (SSD) HD and had trouble booting from a disc until I enabled Legacy Mode and disabled Secure Boot in BIOS. Boot orders in both UEFI and Legacy are the same, with DVD Rom set to boot first. Also, the settings for IPV4 and IPV6 are set to IPV4 (Legacy) when they were once set to BOTH IPV4 AND 6 and are unable to be changed, if that's important. Now whenever I boot up I always get a "No Boot Device Found" message until I hit "Enter" at which point i'm allowed entry into my precious Win10 laptop.  I disabled Legacy in BIOS, but then i get a different "No Boot Device Found" error, and hitting "Enter" doesn't help. Could some kind person tell me how to correct this, and possibly why it happened and the differences in each option? I'll settle for how to correct this, though, with much gratitude.  MUCH gratitude. GN

Read other answers
RELEVANCY SCORE 61.6

I have an Ideapad Z710 running under Windows 8.1.A few days ago the Laptop suddenly did not come up properly from sleeping mode. In the mean time I found out that I can get it started if I remove both the Li-ion battery and the coin cell battery (CR-2032) and install them again. But then if I switch the computer off (or put it in sleeping mode) it does not come up again.  And I have to apply the a. m. procedure again. Any idea what the root cause could be  ?

Read other answers
RELEVANCY SCORE 61.6

My Z710 retuns the phrase "Please insert a disk into Drive D" when I insert a disk (full or unformatted). I have tried uninstalling/installing the drive to no effect. Is there a diagnostic procedure or software I can try before I go on the drive replacement route please?

A:Ideapad Z710. DVD not working

What are you doing prior to this message?Also does the Optical drive show in Device Manager and is it indicated as working?




T520 Model 4239 Intel(R) Core(TM) i7-2860QMbr>; Nvidia NVS 4200M Windows 7 Home Prem - 64bit w/8GBZ70-80 I7 - 5500U 16GB GB - 1TB HD Window 8.1 64bit FHD 17.3 inch Display, Nvidia G840 w/2GB memory

Read other 1 answers
RELEVANCY SCORE 61.2

When going in to BIOS the Boot Mode is greyed out and locked to UEFI. I've updated to the latest BIOS but alas still no option to change. Am I missing something or have Lenovo locked it out (which would be VERY iritating!). I've disabled secure boot, disabled fast boot and disabled the OS support but still no legacy boot. I want to boot from a USB stick but its just not showing up. I've tried the Novi button but all I get is the Window boot loader. Any ideas?

A:Ideapad 320s 14IKB 80X4 - No legacy boot option

Found the answer. The SATA controller mode needed changing to AHCI. This brought up the option of legacy boot in boot mode.    

Read other 1 answers
RELEVANCY SCORE 60.8

Hi, I have the ideapad 300-14ISK (80Q6) were it comes with a HDD of 1Tb, I recently updagre it with a 250Gb SSD from Sandisk, and the computer does not detect the HDD at first power one, but if I restart with ctrl + alt + supr it restarts and then loads win 10 without problems. bios version is: D5CN43WWEC version is: D5EC43WW I have reset default settings, enter the secure boot to setup mode, reset factory ec from bios, swap to legacy (just testing because win 8 and up must be on UEFI) and nothing works but problem was very identified because only happend when is SSD and detect until second boot. if I power on, then power off and then power on, it be considered as two cold power on so it does not detect HDD, for detect drive must restart after the first boot does not detect in order to work.  

Read other answers
RELEVANCY SCORE 60.8

Best I can tell the documentation HP publishing specifying the method required to disable Secure Boot on an Envy 700-074 was written by someone(s) who had no experience in implementing the methods they list.  IT DOES NOT WORK!  The ONLY way this machine will boot to the harddrive or to a bootable CD/DVD is if SECURE BOOT IS ENABLED. I have spent literally days trying to get it to work.  Formatted harddrive as MBR not uefi, gone through the truly bizarre methods required to get the computer register in bios that I wanted the DVD drive as the first option, F10 and Escaped innumerable times.  Bottom line, whoever designed and implemented the bios on the Envy 700-074 MUST be kept away from future involvement on bios implementation!

Read other answers
RELEVANCY SCORE 60.8

My Lenovo ideapad Z710, after a year of use started telling me the battery was not the correct battery.  I thought the battery might have died.  I eventually bought a replacement battery.  The new battery gets the same message.  My wife has a different model but uses the same battery.  My OEM battery does not function in her machine but the new one does.  So it appears that my machine has a problem recognizing the proper battery.  Once I accept the message, the machine boots and runs fine plugged in.  The battery does not charge so I assume the machine is protecting itself from improper battery.  The new battery is a DR.BATTERY Notebook battery with a two year warranty.  When I was shopping for the battery, there were numerous suppliers and of course they all claimed to have only the highest quality that meets or exceeds the original battery specs. Does anyone know a solution?  Could it be a software problem?  I had assumed it was a hardware problem.  The computer works fine as desktop machine, but with no battery it is pretty worthless as a portable. 

Read other answers
RELEVANCY SCORE 60.8

Is Lenovo IdeaPad Z710 i7-4710 M.2 compatible?  I am considering to replace the WiFi card for an M.2 SSD card.  Now the question is my computer M.2 compatible.with those standard. If you know more about this subject let me know. Sincerely

Read other answers
RELEVANCY SCORE 60.8

I can burn jpegs on a CD/DVD, but when I try to reinsert and view, nothing loads.  It's like the device doesn't recognize the file from the CD/DVD.  Any suggestions?

Read other answers
RELEVANCY SCORE 60.8

Hi to evreyone! So recently I bought a brand new Lenovo Z710 (i7-4700mq, intel hd 4600 and nvidia gt745m). I then installed windows 8.1 (genuine) and all the drivers on the cd that came with the machine. But it seems there is a big problem with the graphics card. Nvidia gt745 seems like its not there. The Geforce Experience and nvidia control panel fail to recognize it, although it's there on Windows Driver Manager.When I try to load a game (WOW) it crashes on the loading screen. "Display driver has stopped responding..." bubble appears and a minute or so afterwards, there is a bsod. The game works on the integrated card (intel hd 4600) when nvidia is disabled or its driver is uninstalled.I tried reinstalling the drivers, downloading and installing the recent ones, removing all graphic drivers and reintalling them in different order, tried safe mode, changed some bios settings, but still nothing happened.Could this be any kind of driver compatibility issue or simply a windows thing, or is it a hardware problem? Could the nvidia be faulty or the laptop itself? I want to try anything before turning it back to where I bought it for a look... So your ideas will be vastly appreciated. Thanks!

A:Lenovo IdeaPad Z710 GPU problem

http://www.nvidia.co.uk/content/DriverDownload-March2009/confirmation.php?url=/Windows/344.11/344.11...try this driver and see how you get on

Read other 9 answers
RELEVANCY SCORE 60.8

Hi everybody, I have the plan to connect a 4k Monitor to my current Z710 Ideapad.As the laptop comes with the GeForce GT745M, which supports resolutions up to 3840x2160 I don't see any bottle neck here. For your reference: Specs of the GT745Mhttps://www.geforce.com/hardware/notebook-gpus/geforce-gt-745m/specifications But how about the HDMI socket? WIth what kind of HDMI Port comes the Z710? v1.0 or v1.4, v1,4a?That's very important to know and unfortantely I couldn't find anything about it in the manual of the Z710 Ideapad. Thanks in advance for your help, Kind regards,Michael

Read other answers
RELEVANCY SCORE 60.8

I purchased my Z710 Laptop 2-3 years ago. Currently I seem to suffer from thermal throttling on both the CPU(i7-4700mq)(85C) and GPU(gt-745m)(75C). I tried cleaning dust from the fan and heatsink but that did not seem to solve the issue. I tried to underclock CPU down to 2.4GHz but still reaches 85C and GPU still throttles as well. So I am thinking of two options:1) Buy a laptop cooling pad and put it under the exposed underside of the laptop and hope that it can cool it down.2)Replace the thermal paste of the CPU and GPU (boy oh boy how sketchy this one is, but exciting at the same time!) and hope for the best? I am looking for your advice on which of these I should choose or if there is anything I am missing? Thank you in advance!  

Read other answers
RELEVANCY SCORE 60.8

I can burn jpegs on a CD/DVD, but when I try to reinsert and view, nothing loads.  It's like the device doesn't recognize the file from the CD/DVD.  Any suggestions?  fyi, I upgraded the device from windows 8 to 10

Read other answers
RELEVANCY SCORE 60.8

Can this laptop be run from a 24V supply, too?Or is that voltage too high?(Two 12V batteries i series)

A:Power supply for IdeaPad Z710

The battery voltage and power supply voltage have nothing to do with each other. It has integrated voltage regulation modules that convert the voltage to the required voltages to power the device and simultaneously drive the battery. The voltage has to match with what the input is designed for, and that is 20V in the Z710. The amperage can basically be higher than required as the devices request an amperage and use how much they need (for the Z710 type 80AK, there were three power supplies: 20V on each, but with either 3.25, 4.5 or 6.75 Amps for 65, 90 or 130 Watts power output), but a differing voltage (unless your device is made for special fast charging types oder mostly USB Type-C, which most laptops aren't) will most likely fry your motherboard/batteries. By the way, the batteries in your Z710 run at either 14.4 or 14.8 Volts, not 12V.





Did I/anybody else help you? Give a Kudo!Did a post solve your problem? Set the post as solution!Lenovo Yoga 530-14ARR (81H9003VGE)

Read other 1 answers
RELEVANCY SCORE 60.8

Hello guys and gals! I need assistance with disabling the led light on my camera. Searching I have found that some registry needs to be edited but unfortunately I can?t find any "LED" "CAMERA_MODE" or similar stuff inside the registry. This is the path where I found camera settings: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{6BDD1FC6-810F-11D0-BEC7-08002BE2092F}\  Anyone with more knowledge than me please assist so I can disable this annoying led.

Read other answers
RELEVANCY SCORE 60.4

I need to put the Windows OS, that means Windows Boot Manager in BIOS at Boot option 2, but in this case it does not boot.
I need to put at boot position 1 PXE boot and if that fails boot from Boot option 2 (Windows). How could I do that?
My motherboard is Gigabyte GA-Z97P-D3.

Thank you!

Read other answers
RELEVANCY SCORE 60

Hi, I have an Ideapad Z710 which I purchased about 3 years ago. Started receiving "The battery is weak, and needs to be replaced" message. Is this a fault or a software update required? I understand degradation of the battery is expected, but do I really need to replace the battery? Thanks

Read other answers
RELEVANCY SCORE 60

Hi
I have ordered a Cruial MX200 Msata card. yesterday i have receive it.
Unfortunately it will not be recognized by the the bios and also not by Windows disk Manager?
According to the Crucial website should my notebook compatible and suitable for this Msata module.
How can i get it working?
 
I have a Lenovo Ideapad Z710
 
Mod's Edit: System model added to the front of Subject line to improve visibility / clarity.
 
 

Read other answers