Over 1 million tech questions and answers.

"TF51005: The query references a field that does not exist. The error is caused by «[System.Links.LinkType]»"

Q: "TF51005: The query references a field that does not exist. The error is caused by «[System.Links.LinkType]»"

I am running the below query but getting this error "TF51005: The query references a field that does not exist. The error is caused by [System.Links.LinkType]"
workItems = workItemStore.Query(string.Format(@"SELECT [System.Id], [System.WorkItemType], [System.Title], [System.AssignedTo], [System.State], [System.Tags] FROM WorkItems WHERE ([System.TeamProject] = 'TIA' AND [System.WorkItemType]='Request' AND [System.State] = '" + comboBox2.Text + "'AND [Siemens.Industry.Common.ProductVersion] = '" + comboBox1.Text + "'AND [Siemens.Industry.Request.RequestType] = '" + comboBox3.Text + "') And ([System.Links.LinkType] = 'System.LinkTypes.Hierarchy-Forward') And ([Target].[System.WorkItemType] = 'Test Case') ORDER BY [System.Id]"));

Not able to under stand the error message.

Read other answers
RELEVANCY SCORE 200
Preferred Solution: "TF51005: The query references a field that does not exist. The error is caused by «[System.Links.LinkType]»"

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

RELEVANCY SCORE 112

I am trying to get BGInfo to use custom fields with the WMI Query to hide the network adapters not in use from showing "none" many times on the screen.
I have used the following query:
IP  Address
WMI Class: Win32_NetworkAdapterConfiguration   Class Property: IPAddress
WMI Query:
SELECT IPAddress FROM Win32_NetworkAdapterConfiguration WHERE IPEnabled=True AND NOT description LIKE "%VMware%" AND NOT description LIKE "%Virtual%"
After using this custom field and deleting the default IP Address field, the results show properly during the current session.  After rebooting the computer, the IP Address field shows correctly the IP Address for 5 seconds then changes to <IP Address>
after the network card initializes or something else happens to it.
Would someone please help to offer advice how to make this change permanent so the IP address displays properly.

Read other answers
RELEVANCY SCORE 103.2

Hi All,

I'm attempting to import data from an Excel spreadsheet into Access. As I'm just trying to get it to work first and then properly attempt to use it, I've simple exported my table "tblTenants", and renamed it Import.xls and changed one column of data.

Code:
Public Sub ImportExcelData()
DoCmd.TransferSpreadsheet acImport, acSpreadsheetTypeExcel9, "tblTenants", "C:\Documents and Settings\Greg Webster\My Documents\Property DB\ImportFiles\Import.xls", True, "A3:I5"​End SubClick to expand...

However, I get the following error:
Field "F1" doesn't exist in the destination table "tblTenants."Click to expand...

And I don't know why, please help.
 

A:TransferSpreadsheet :: Field "F1" doesn't exist in the destination table

Read other 8 answers
RELEVANCY SCORE 96.4

Hello - I've repeatedly tried and failed to install Service Pack 1. I have run the update readiness tool, and have run chkdsk and sfc. I've tried installing through Windows Update, as well as downloading the standalone installer from Microsoft.

The former results in an "unknown error"; the latter results in a window saying that "the specified service does not exist as an installed service" almost immediately after trying. A similar message has come up occasionally in recent days when trying to install a couple of other programs.

I'm currently out of ideas and would appreciate any help. Thanks!

Read other answers
RELEVANCY SCORE 92.8

Hey everyone,
        I am trying to get the REST queries to work with the sharepoint end points instead of graph end points. I first created an app with relevant permissions and have given it the admin consent. Then I am hitting the https://login.microsoftonline.com/<tenant>.onmicrosoft.com/oauth2/token?Content-Type=application/x-www-form-urlencoded end
point with https://<tenant>.sharepoint.com as resource. I am then using the access token retrieved to give the rest call to https://<tenant>.sharepoint.com/_api/v2.0/drives/b!3indYSbqZ0-hVSPnCgIZy-2xDMh7jH9AuQnEzJMc6TEfQoSJvJT-R6tT0lFBQiPr/root/delta
but it is failing with "error":{"code":"generalException","message":"General exception while processing"}}. The REST response code is 401 Unauthorized. I have filed a Microsoft support ticket but they
have asked me to post on these forms. Can someone please help me with this? I am not able to move forward because the error is pretty generic and doesn't give any additional details.
Thanks,
Sai Kiran Katuri.

Read other answers
RELEVANCY SCORE 91.2

"A problem caused [name of program] to stop working correctly. Windows will close the program and notify you if a solution is available." But no solution shows. I have been using the same HP Pavilion tx1000 for a year and a half with no software or compatibility issues. I run Vista Home Premium, Service Pack 1 - 32 bit. Slowly this message began to appear with every microsoft program I opened and then started to spread to non microsoft programs. I tried reinstalling the programs, doing a system restore to the oldest restore point I could, I also tried uninstalling any window updates that were installed right before my problems. I have read some strings that indicate it may be a compatibility issue between the service pack 1 and vista but the service pack came with the computer and it has been working fine until recently. I am at loss what to try next. Has anyone using Vista Home Home Premium experience anything like this!!!
 

A:Windows Error Message "{Name of Program} has stopped working" "A Problem caused ...

hi and welcome the first thing to do is run your anti virus and malware progs this will check for issues there and hopefully rule it out the next thing to try is sfc/scnw http://www.vistax64.com/tutorials/66978-system-files-sfc-command.html its a how to and also try this http://searchenterprisedesktop.techtarget.com/generic/0,295582,sid192_gci1276029,00.html this will check for other problems in both your files and your hard drive
 

Read other 1 answers
RELEVANCY SCORE 89.2

This happens on a windows xp, srvice pack 3. Not using any programs that is using a lot of memory, no videos or games. Started last week.

also have received error saying "not enough storage is available to proceed with this command" when I try to open up any other programs.

I've ran numerous scans, and the next step is for me to do some work in the registry, but wanted to get some advice first.

I've read to increase the IRPStackSize, haven't done that yet. Any suggestions?

A:"insufficient system resources exist to complet the requested service"

tell about your computer, cpu, ram, harddrive size and free space on c, and video card

Read other 12 answers
RELEVANCY SCORE 88.8

Hello all, I started having problems with my pc a few days ago and kept getting this message while trying to boot it up. I'm using a friends lap top to post this to try and get some answers.

Every single time I start up my pc, I get the message that's in my title. I've even tried booting it in safe mode and I still get this message. I've seen threads and posts about this issue, but they all started receiving this message while thier pc's were actually able to get xp to boot.

I'm hoping that this is posted in the right forum.

Can anyone tell me something I can do to get it to work again?

Thanks!

A:"Insufficient system resoures exist to complete the API"

Hmm, I've seen anything from too much ram Vs. not enough HDD space, to hibernation issues.

A suggested fix is detailed below, considering you can't get into the system, even in Safemode:

Removing all but 1 stick of memory, booting into Safemode, unchecking the "Enable Hibernation" box in power Properties, deleting the 'hiberfil.sys' file and then reinstalling your memory.

See 'http://support.microsoft.com/kb/909095' and 'http://support.microsoft.com/kb/330909' for further insight.

Read other 2 answers
RELEVANCY SCORE 88.8

Currently i am running Windows XP Home and the following message apears whenever i click on any item on desktop or try to run a program such as internet explorer or even open a section of control panel.

"Insufficient system resources exist to complete the requested service"

I cannot open any program other than access My Documents, My Computer or Control Panel.

I dont know what has happened and what i should do to be able to use my system again. My system is only 8 months old and currently has over 16GB of free space.

Any help would me much appreciated as i need the computer for work purposes.

A:Crisis! - "insufficient system resources exist..."

From your info you may want to Go through the Highjack this procedure Read this First

Read other 1 answers
RELEVANCY SCORE 88

I am experiencing an interesting problem with system resources in Windows XP which, quite frankly, is driving me mad!!!

When the PC has been on for some time (say 10 hours +) it grinds to a halt and I get the following message when I try to open an application etc.

"insufficient system resources exist to complete the requested service"

Nothing will fix it, other than to crash out and re-boot. The PC is then fine for another 10 hours or so.

I have already re-formatted this PC, reinstalled Windows XP and a conservative repertoire of well known programs, but to no avail.

Can anyone please tell me why this is happening and what I can do to fix it? The PC is running perfectly, otherwise. I just wondered if there were any issues with Norton Antivirus, as this program seems to be quite memory intensive??? Spec: AMD Athlon XP 2200+, 1.80ghz, 512 RAM, Win XP (Home) fully updated with all patches.

Many thanks, Esmeralda

Below is my Hijack This log:

Logfile of HijackThis v1.97.7
Scan saved at 20:00:00, on 24/07/2004
Platform: Windows XP (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 (6.00.2600.0000)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\Explorer.EXE
C:\WINDOWS\System32\brsvc01a.exe
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\System32\brss01a.exe
C:\PROGRA~1\NORTON~1\navapw32.exe
C:\PROGRA~1... Read more

A:"Insufficient system resources exist..."

Read other 13 answers
RELEVANCY SCORE 87.6

Hi,

I have a Gmail account. I have a problem that when i send a mail TO any one and CC to others, when i see in sent items, it displays like normal but at the recipents end, the addresses in CC displays in TO field while CC dont appears. For example, i sent a mail and when i see the sent items, i found as following;

To: [email protected]
CC: [email protected]; [email protected]; [email protected]

when i see that mail in my yahoo account or other receipents, i/they found as;

To: [email protected]; [email protected]; [email protected].

While [email protected] also recieved that mail. it means mail sends correctly but addresses appear abnormaly.
Please help how to resolve this issue.
 

Read other answers
RELEVANCY SCORE 87.2

If you are trying to burn a DVD, get 99% completion, and then get the error message:

"the owner sid on a per-user subscription doesn&#8217;t exist"

I can't tell you why, nor how to fix it, but the following SHOULD get you back to burning...

1.) From the start menu choose "Windows Movie Maker", (NOT: Windows DVD maker)...

2.) Start a new project, from the menu on the left, click "videos", select the videos you want on the DVD.

3.) Then highlight and drag the videos onto the storyboard...

4.) Click publish, and choose the DVD option...

The program then will then open the DVD maker program. And your project SHOULD complete without any snags. (I have done this several times, and it has worked every time! Hope it does for you too!)

I searched all over creation for the answer, and there were so many other people asking the same question, but no answers. Thus, when I figured this out, I ran back to my home base, (Techguy.org), to share in hopes of saving someone else from the same frustration.

Cheers ~Niki
 

Read other answers
RELEVANCY SCORE 87.2

IN BRIEF:
-asus e900 windows xp service pack 2
-could not get into OS proper. will only reach welcome screen
-netbook restarts when lead to safe mode
-not sure if accidentally pressed hibernate

what can be done?? please help!
 

A:HELP! error message:"memory resources exist to complete the API" seen before welcome

Add any RAM recently? This issue generally has something to do with hibernation mode with systems that have more than 1GB of memory, however this seems unrelated. I would say that your OS is cooked possibly, if it was bad RAM or power supply or mobo it would have more symptons so it is definetly software related in my opinion, my suggestion would be to get the data you need off with a live CD, then install a freash copy of windows.
 

Read other 1 answers
RELEVANCY SCORE 87.2

Hi:

When booting up, Vista does not come up with the usual window that displays username and password box but comes up with a larger box with description "other user". There is only one user on this laptop. When you click on the box a window opens with "username and password". No matter what name o r password (or even administrator with or without password) you get the message " The specified domain either does not exist or could not be contacted". I have tried to do boot in Safe Mode (using F8), but no matter what option you choose from that menu (I have chosen all of them) it just boots up and gives that box "other user" in the middle of the screen.

I tried using TRK (Trinity Rescue Kit) to remove the password but without any success. I don't think it is a password issue. Since this "other user" box suddenly has appeared and was never there before I am suspecting it is due to virus.

This is my niece's laptop. She hasn't backed up the files at all so I am hesistant to reinstall the system at this point. Any help would be greatly appreciated.

Thank you.

A:Vista on logon gives error message "domain does not exist"

Hi Bwaanaa,

The reason you are getting 'Other User' is because your computer is set to be part of a domain. To change this, log into windows with your normal account, press the Windows key + R (which will bring up a Run box), type: sysdm.cpl and press enter, then under the "Computer Name" tab, where it says "To rename this computer or to join a domain or workgroup", click the Change button, then put a check in the Workgroup box, and type a name such as: WORKGROUP and then press OK and then restart your computer.

If that solves it, great. If not, let us know.

If this was caused by a virus, thats another issue.

Read other 7 answers
RELEVANCY SCORE 86.8

Hey everyone. This one has me stumped. I've tried everything I could think of. My work Network has about 15 computers connected. 13 of those are Pentium Celerons about 700 Mhz and up but we have two much much older PC's. The one that just developed this problem is a really old Pentium 1 150 Mhz with a 4 GB HDD. It's running Windows 98 SE (all updates etc done), all the rest except the other older PC have Windows 2000 Pro installed.

Now this one PC (it's a crappy compaq) will no longer connect to the one computer Windows 2000 Pro I basically set up as a file server. It has a number of shares which some programs we use require a mapped network drive. This one computer when trying to connect to the server only gives me an error that "Device Does not Exist" I did have it working last week but now it's crapped out. Funny thing is I can ping the server by name and IP as well I can connect to other old Windows 98 Computer no problem and any other Windows 2000 Pro computer on the network. It's only the server it won't connect to any more. The server has a static ip.

The funny thing is we use a program called Office Tracker Scheduler which connects to the server through the program to download updated scheduling info...this still works, it's only when trying to connect through My Network Places that it won't connect as well as it won't connect when trying to manually map the network drive to either \\ip address\sharedFold... Read more

A:Old computer gets "Device Does Not Exist" error when trying to connect to another PC

Read other 16 answers
RELEVANCY SCORE 86.8

When I Am On A Website And Want To Download From It I Get The Message That The Path Doesn't Exist, Check Path And Try Again.
 

A:ERROR MESSAGE "PATH DOESN'T EXIST"

Read other 6 answers
RELEVANCY SCORE 86.8

I can't download the utilitiy because I"m on a government computer that is about to be upgraded. I'm on Windows 7 Professional (I know).

I have a very simple database. I am not good at VBA so it's basically got queries behind it and a few macros. My problem is that on the main entry form, when I go to a new record and try to enter in any field, I get a pop up error "field cannot be updated". It only happens on the first new field I enter on the form, then I can cancel the error and continue without other issues. I can go back to the form and edit, reedit and the error doesn't happen. It's only on that first field I enter. I have since checked to make sure none of the fields are locked and none of them have data entry set to 'no'. Everything looks fine that I know to check.
 

Read other answers
RELEVANCY SCORE 86

Hi! I'm Having trouble installing Microsoft .Net 4.0. I've tried every solution I found on the internet and still nothing. Also I may have accidentally removed it before from my programs. Is there any way I could fix this without having to lose my files(i.e. reformatting). Thanks a lot!

A:.Net 4.0 error 0x00000424 "the specified service does not exist"

Please download the Farbar Service Scanner from

http://www.bleepingcomputer.com/download/farbar-service-scanner/

Right-click on the saved file and select 'Run as Administrator', and tick all the options, then click on the Scan button - copy and paste the report to your response.

Read other 5 answers
RELEVANCY SCORE 86

I saw all of the errors in this sub-forum, and didn't see one that matched mine. So, I apologize if I did miss it.

I'm trying to Activate a LEGAL, LEGAL copy of Win7 Enterprise 64Bit! I'm getting an error code when I try to do it online:

The Error Code is: 0x8007232B. It says "DNS name does not exist."
I wish geeks would learn how to talk english.

I found the little $29 doodad ErrorEnd. REALLY? M'soft can't give me a free solution? I didn't do anything wrong. Oh! It doesn't really make sense to do a restore, when I never got Windows activated anyway. Am I correct on this assumption? So, I bought the stinking doodad, and it still didn't work! I could REALLY use some help here.

Thanks in Advance.

A:Error Code is: 0x8007232B. It says "DNS name does not exist."

Hello gplea, welcome to SevenForums!

How are you trying to activate this? KMS activation?
Tom

Read other 4 answers
RELEVANCY SCORE 86

I recently built a call log database in Access 2007 for my team to use when calling agents on our top errors we see from a vendor's error report. My boss is requesting a report to see how many items have been resolved

I have a query started and I am trying to complete this task in a single query (if possible) instead of several queries (as I've done for a couple other things).

I have 3 tables I'm using: Assignment, AgtInfo and CallLog
Joins as follows: Assignment.st=AgtInfo.agcy_st
AgtInfo.agt_id=CallLog.agt_id

Fields in the results: Assignment.assigned_analyst, CallLog.rpt_mnth, CallLog.resolved

Resolved is a yes/no field. I've done a query that converts the -1 to a 1, so that the sum is a positive number for the "Yes" values. I'm not sure how to enter the expression to subract the "Yes" values from the total number of values (yes/no) to get to my "No" count.

Essentially, I'd like the results to display as:

assigned_analyst, rpt_mnth, CountYes_resolved, CountNo_resolved

Somehow the connection is just not clicking in my brain with everything I've read though searches. Any help is appreciated! Thanks!
 

A:Solved: Access 2007 Query: Return count of "Yes" and "No" values for Analyst/Report M

It is easier to add another column to counf the Nos, use
0 or is null
as the IIf statement and use a 1 to count them
 

Read other 3 answers
RELEVANCY SCORE 84.4

I stored some files on my D drive which is an external hard drive ...

Lately I have had this happen a number of times with totally unrelated files in different places on the D drive.

I try to open them (in Excel, but I don't think that matters) and I get an errors saying the file does not exist and to make sure it wasn't deleted or renamed ...

However, if I copy that file to folder on my desktop it works just fine.

Is this a hardware problem with my external drive? It is not true of all the files ... for instance there are say 19 similar files in a folder and maybe 2/3 of them give me errors while 1/3 do not.

Read other answers
RELEVANCY SCORE 84.4

After formatting my Windows XP, i think ive got a virus which is causing CPU Spike.
I scanned my computer with: AVG, NOD32, McAfee and Avast!
All those AV softwares didnt find anything that was causing this.

I was googling for an answer and i went to this site which told me to use "TrueSword"
When i used it, it seems like i have 100 virus or something...

I also thought this was a spyware so i scanned with ALOT of anti-spyware software and it didnt do anything...

Few hours ago, i went to play CStrike and i kept getting killed cause of this.
I got so i "End Task" System and my CPU Spike was gone but computer was shutting down in 1 minute.

Help!
 

A:CPU Usage Spike caused by "System"

Read other 6 answers
RELEVANCY SCORE 84

I have a machine where the customer was trying to restore a user account to point to an "old" user area (my documents, application data etc etc), where XP had created a "new" user area that had the username with the "computer name" appended to the end of it.

He says he went to the registry and changed all of the entries that had "computer name" in them, and blanked the ones where all that was there was "computer name" (this is how he explained it to me). So basically it would seem that there is no "computer name" references in the registry any more. Of course, I don't think he made a backup <sigh>

Now, the computer won't boot and he wants me to fix it...it gets to the blue screen "Windows is starting up..." and the hard drive stops and the machine is hung.

Is this a fixable problem for anyone here?
 

A:Solved: regedit blunder...deleted "computer name" references

Read other 7 answers
RELEVANCY SCORE 84

Today I got my new laptop and decided to dual boot Ubuntu and Windows 7 on it. After several hours of partitioning and researching, I ran into many issues. Eventually I decided to boot Ubuntu from a USB drive, open up Gparted, and delete any and all Linux partitions while expanding the size of the Windows partition back to normal.

Unfortunately, in the process, I must have made an error, because now upon startup I get the "bootmgr is missing" error. I don't have a recovery CD nor does my laptop have a CD drive, so that's out of the question, but I know for a fact my Hard Drive has a recovery partition on it. I want to restore my computer back to normal, keeping my old files if necessary. However, since I just got the computer today, I clearly don't have anything on there I can't afford to lose, so if I must do a factory reset I will.

A:"Bootmgr is missing" error upon startup, caused by human error

Welcome to the forum,

Sounds like quite a mess, you can try Bootmgr is missing - Fix

Since you don't have an optical drive you can USB Windows 7 Installation Key Drive - Create

Since you need a repair disc or an install disc to do that you'll want to create one

With the installer ISO for your licensed version here Official Windows 7 SP1 ISO from Digital River ? My Digital Life



You may just want to get a superior clean reinstall using the COA key on your computer,

Clean Reinstall - Factory OEM Windows 7

Read other 7 answers
RELEVANCY SCORE 83.6

Hey. I receieved a Rootkit virus last night alongside "Windows 7 Recovery" and it emerged into something nasty today. I followed the fairly routine steps to remove it but realised I was still being redirected.
I'm running Windows 7 Ultimate and it was pre-installed so I don't have the disk.

Initially I checked my internet/browser wasn't using a proxy
Fixed my Windows host file to read only "127.0" etc.
Scanned with RKill and it "terminated" the rootkit
Used Unhide to recover hidden files on the Desktop

I was still getting redirected from Google so I:
Then checked Unhack Me... found nothing.
Continually cleared all Cookies
Tried to run TDSKILLER... it did nothing but Bluescreen me. I then used GMER as an alternative and it's came up with scan results, but nothing in red.
Ran Combofix - nothing
Ran a full scan on MBAM - nothing found
Ran a full scan on Spybot - nothing found
Ran a full scan on Pandascan - nothing found
Ran a full scan on CCleaner (cleaning EVERYTHING possible)
Ran a full scan on Spyware Doctor - nothing found
Installed Spyware Blaster
Ran Killbox - nothing found
Checked that nothing fishy was running on Security Task Manager
Checked my Windows startup programs, which were almost all Windows and NVIDIA

I then noticed a file jlvmyfor.exe in Program Files, disguised as winamp, which completely ruined the running of any process - including explorer.exe when I restarted after a scan.
Now I have an error 0x0000... Read more

Read other answers
RELEVANCY SCORE 83.6

Dear Experts,
Recently, I often got Error "A problem has caused a program to stop working". This happened when I was on Paint, Google Chrome, and some other applications. Here's what I found in Event Viewer. Please tell me what to do.
Thanks all

A:error 0xc0000374 "A problem has caused the program to stop working"

I googled the error and found the error may be a hardware or memory problem.
Just copy the error and paste in a windows search.
How old is your system and how much ram does it have?

Some of sites recommended doing a restore back to when your computer was not having this problem.
I am not an export in solving your error problems but someone will be along to help out in the meantime look under the hood and make sure everything is clean and seated properly.
Might even try a restore also.
THW

Read other 9 answers
RELEVANCY SCORE 83.6

Hello All,

I am experiencing a very debilitating issue with my laptop. The error indicated on the title of this thread appears every time I try to open multiple programs on my machine; the error is present in at least the following applications: Windows explorer, HP SimplePass, HP CSI Shell, HP Support Assistant, HP Installer, Adobe Acrobat X Pro, Synaptics TouchPad V7.5... and perhaps more.

I include with this message a zip file with some recent logs (CBS. log, Errors Event Viewer, Last Scan.txt, Malware log.txt, Check Disk Event Viewer log) for your review so that both of us can save some valuable time.

Note: I am not by any means an expert on either computer software or hardware so, I would really appreciate if you help me out to sort this issue having that in mind.

Thanks in advance for your help.

A:Error message: "A problem caused the program to stop working..."

Hi,

Can you remember when this problem started to happen, if so had you made any changes to the computer such as software installations?

If so, you can try a system restore or use a backup if you have one to roll the os back to a time when all was working well and see if this solves your problem

I can almost guarantee that this is either a damaged or corrupt shell or a conflict with some software, as the fact that you can load the operating system up and get past post shows that it's not hardware related in anyway

Thank you

Read other 2 answers
RELEVANCY SCORE 83.6

An unauthorized change was made to Windows.
You will no longer receive notifications, including those about your licence or activation. Use the link below to find out how to fix your system.
Error: 0xC004D401
Description:
The security processor reported a system file mismatch error.

This happened after i used spybot and rebooted computer, i cant open control panel without it disappearing 1 second later, i cant use windows media player, i cant hear any sound on youtube ect,

i tried to do system restore but there was only 1 restore point, which was only made after the spybot clean up.
 

A:Spybot caused error "An unauthorized change was made to Windows"

Read other 6 answers
RELEVANCY SCORE 83.6

My wife keeps getting kicked out of Farmville and Pioneer Trail, both on Facebook, with an error message ("A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available") indicating an issue with the application. It seems to be coincidental with our starting to use McAfee virus protection software. The computer is fairly new (i.e. a few weeks old) running on Windows 7. She did not have this issue on Windows XP using AVG virus protection. Any ideas what the issue/solution
 

A:"A problem caused the program to stop working" error

If this started when you installed McAfee, try temperately disabling it. Double-click the taskbar icon to open Security Center \ Click Advanced \ Click Configure \ Click Computer & Files. Turn Virus Scan off in the right-hand window and set it for how long. Click Internet & Network to do the same with Firewall. Now see if you still get kicked off.
 

Read other 1 answers
RELEVANCY SCORE 83.6

Windows Error: "a problem caused the program to stop working correctly"

I get this error message within 5 minutes of starting my game Knight Online. freeze!

I have been playing Knight Online on this laptop for 1 year with NO problems then boom

My computer:
Gateway model:P-7805u
Intel Duo core 2.26GHz
NVIDIA GeForce 9800M GTS video card
4G RAM / 64 bit operating system ~ under resolution my choices are 16bit and 32 bit ??

I looked up the report yesterday from control panel and it had stuff I didn't understand ..numbers and ID's.. I just went back to see the report but now its turned off and I'm the administrator! ):

Any solutions/ideas for error message and why its crashing my game?

A:Windows Error: "a problem caused the program to stop working correctly"

Some good suggestions
Tips on Troubleshooting Game Issues - Windows 7 Forums

Read other 5 answers
RELEVANCY SCORE 83.2

I have this major issue in 2 of my computers. I lost internet connectivity. I run on Wired DSL connection ( always on ). I did try to check ipaddress of my computer and it ends up with Internal error

" An internal error occurred: the system cannot find the file specified. Additional information: Unable to query hostname "

after googleing over internet i found that if we replace tcpip.sys from
c:\windows\system32\drivers
with a new version of tcpip.sys from
c:\windows\servicepackfiles\i386

Tried killing some of the ghost devices from device manager ( non plug and play drivers with exclaimation mark / Band )
I tried winsock reset and loading tcp/ip over again with no success

Any help highly appreciated ... !!
 

A:"Internal Error Unable to Query HOST" when we try to Use ipconfig

ipconfig.exe should be found in c:\windows\system32 and have a version number of 5.1.2600.2180 for XP SP2. A copy should also exist in c:\windows\servicepackfiles\i386

Ipconfig must be run from a command window; eg: Start > run cmd

ipconfig /all

If you still get an error, run eventvwr.msc and look in the event logs for more information.
 

Read other 3 answers
RELEVANCY SCORE 83.2

hi everyone! im having trouble opening my Outlook Express... I already restart/reboot my computer several times and everytime I open my Outlook Express, this message keep coming up "Msimn has caused an error in COMCTL32.DLL." What should I do??? I did some research and I think its because my OE is new and cant find the match in my computer. Can I reinstall my old OE at all??? Please help me!!! I really appreciate it!!! By the way my computer is WinME. Thanks A Lot!
 

Read other answers
RELEVANCY SCORE 83.2

Like the title says. I simply want to set my hard drive to OOBE so that I can install it on my new computer set up, but sysprep has a problem with wevtapi.dll . Here is the error log:


Code:
2012-09-12 22:20:34, Error [0x0f0082] SYSPRP LaunchDll:Failure occurred while executing 'C:\Windows\System32\wevtapi.dll,EvtIntSysprepCleanup', returned error code 1717[gle=0x000006b5]
2012-09-12 22:20:34, Error [0x0f0070] SYSPRP RunExternalDlls:An error occurred while running registry sysprep DLLs, halting sysprep execution. dwRet = 1717[gle=0x000006b5]
2012-09-12 22:20:34, Error [0x0f00a8] SYSPRP WinMain:Hit failure while processing sysprep cleanup providers; hr = 0x800706b5[gle=0x000006b5]
I do have the full log, so if you think it will help, just tell me and I'll upload it. I have also tried download wevtapi.dll from the net and replacing the original, but that results in instant failure. Also I looked for what process was using wevtapi.dll but I couldn't find anything. So please, if anyone has a solution, I'm dying to use my new computer set up! Thanks!

A:Sysprep Fatal Error caused by "wevtapi.dll"

*bump*
(FYI) I have tried sfc.exe /SCANNOW and it reported no errors.
If anyone has another way to get my system to OOBE or running on a different motherboard (even complicated ones) it would be greatly appreciated.

Read other 1 answers
RELEVANCY SCORE 83.2

In MS Word 2007 I created a field code where I click on it and then type something in it, I want another field code to automatically update to whatever I type in X
 

Read other answers
RELEVANCY SCORE 83.2

SP2 - TCP/IP internal error - "Unable to Query host name"

A friend installed SP2 on a Dell Inspiron 8100 laptop, 866M processor, 833MHz & 320MB RAM.

Now he can't get on the net and gets the above error.

Any ideas?
 

A:SP2 - TCP/IP internal error - "Unable to Query host name"

Try this:

1. Backup and delete the following registry keys
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Winsock
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Winsock2
2. Reboot
3. Go to the network connections folder, right click the icon for your
network connection, and select properties.
4. Click install, choose "protocol", and click "add..."
5. Click "Have Disk...", enter "\windows\inf", click OK
6. Select "Internet Protocol (TCP/IP), click OK
7. When the process in complete, reboot
 

Read other 1 answers
RELEVANCY SCORE 83.2

I am on a Windows 7 Professional SP1 system, running IE 11 (11.0.9600.19230C0, update version 11.0.101 (4483187).


When I have Internet explorer opened in "kiosk mode" on one monitor and I open a hyperlink from the other monitor it will open the link in a new IE window (non-full screen) .    If I do the same test with IE not in "kiosk mode"
the hyper link will open in the open window/tab. 

I have Internet Options -- Tab settings "Open links from other programs in"  set to "the current tab or window".  

Any ideas would be appreciated.
Thanks - Tim Reisner

Read other answers
RELEVANCY SCORE 82.8

Hello,
I just did a clean re-install of my Access 2007. It installed without errors and I checked all the boxes for VB to be installed, but "References" in the Tools Menu is disabled for some reason.

Any suggestions are apreciated.

Thanks,
Jake
 

A:"References" not enabled in Access 2007

Did you have a Database open when you did it?
Each database has it's own references.
 

Read other 1 answers
RELEVANCY SCORE 82.8

Does anyone know if its possible to autofill the "from field" as a rule, when your in "another users /delegates" mailbox, so you dont have to add their address in the "from field"? (so it will autopopulate with their email address (and show "on behalf of")?
I hope this was clear.

thanks.
 

A:Solved: outlook 2007 "from field" 'on behalf of" issue

No ... its not possible if the user has more than one delegate (that has added them with the applicable rule). from that point on, they will have to choose which person they want to add to "sent" on behalf of field.

However, If they have just one (one only) user who has added them with that permission (to send on behalf of), it will auto-populate with that user.

So, It does not matter even if they are "in" a specific users mailbox (and expect the "on behalf of" to auto fill with that users name). If they have more than one delegate that has added them with that permission, they will still have to choose which user the message will sent "on behalf of"

i figured this out by trail and error etc
 

Read other 1 answers
RELEVANCY SCORE 82.4

Have a 32 bit Vista system. Can't download anything except window updates.

Every time a download is tried an error window pops up saying IE Caused an error and it closes. Window updates and will install.

Try to open MyComputer or Window Explorer and get a class not registered error. Start/run regsvr32 ExplorerFrame.dll will solve the problem with Windows Explorer.

But will not solve other problems.

Tried

System restore to an earlier point
Disabled all add ons
Disabled Firewall
Reset IE Explorer security
Removed check from Require server verification
Ran chk/dsk
Ran Malaybates AVG Scan all scans clean

I even uninstalled all update for Oct, didn't help, since all updates have been installed. no help
Uninstalled all software, no help.

The only thing I haven't tried was getting out that old repair hammer....
 

Read other answers
RELEVANCY SCORE 82.4

Hi, everyone. I'm new here but not to this problem.

I've been having this problem for a while now. I've tested my memory and even replaced it, but I'm still getting BSOD's.

This is the error that I get - http://oca.microsoft.com/en/response.aspx?SGD=d5e72df7-dc5c-4b88-80ec-6a98a63b2005&SID=10

I just put a brand new stick of 512 PC133 in this PC the other day and it didn't do it for a while, but when I get home today, it had rebooted with that error message.

I'm running WIN XP PRO w/SP2, 512 PC 133 SDRAM, ATHLON XP 2200 processor.

I'm adding the last few error reports to this reply. Any help is greatly appreciated!

Thanks!!

Chris
 

A:Keep getting "Error caused by a device driver"

No takers?

Can anyone help me? Please?

Thanks!
 

Read other 3 answers
RELEVANCY SCORE 82.4

When I try to open Outlook Express, when I am not on MSN, it comes up with this annoying error, and it won't go away even if I click on OK. I end up having to turn off my comp the hard way (power button). I know I can use the Repair function in the Add/Remove Programs thing, but after I do it, it will eventually start happening again, pretty quickly. Is there a fix to this problem? Or is it like this because it is the latest MSN, and there are bugs to be fixed? I've heard that downgrading to 5.0 is sometimes recommended. Anyway, thanks in advance.
 

A:"Msnmsgr has caused an error in <unknown>"

Read other 10 answers
RELEVANCY SCORE 82.4

Hello everyone,

I'm very new here, and I've got a problem!! (Sorry if this has been talked about already, but I couldn't really find any relevant information that would help me.)

So I built my computer just over a month ago, and since the very beginning it chooses to crash randomly. Seems to be more frequently now though. I haven't been running similar programs when this happens, so I'm having a hard time figuring out what the problem is.

Anyways, when I get back into windows, a box pops up saying that the system has just recovered from a serious error. If I click on Send Error Report, Microsoft opens up a page saying that it was caused by an unknown device driver.
( http://oca.microsoft.com/en/response.aspx?SGD=6915916a-16b0-4d43-aed9-3ef730bbf60b&SID=10 )

I don't know how to fix this problem, but hopefully there are some big geeks out there who would be glad to help me!

My computer specs are:

-AMD Athlon 64 X2 3800
-Asus A8N32-SLI Deluxe w/ DualDDR400, 7.1 Audio, Dual GB Lan, Dual PCI-E x16 SLI, Cool-Pipe
-Kingston 1GB PC3200 DDR CAS 3
-Kingston 1GB PC3200 DDR CAS 3
-Seagate 120GB Barracuda 7200.9 SATA II w/ NCQ, 8MB Cache HD
-Seagate 80GB Barracuda 7200.9 SATA II w/ NCQ, 8MB Cache HD
-LG Super Multi DVD Writer 16x16 DVD +/-RW Dual-Layer
-MSI NX6600GT-TD128E Geforce 6600GT 128MB DDR3 w/ TV-Out, DVI
-Creative Labs Sound Blaster Audigy2 ZS Sound Card

Just let me know if you need more info to help solve ... Read more

A:"Error caused by a device driver" Help!

Hello and welcome to Techspot.

Go HERE and follow the instructions.

If that doesn`t help. Zip 5 or 6 of your latest minidumps together and attach them here.

Regards Howard :wave: :wave:
 

Read other 9 answers
RELEVANCY SCORE 82.4

Hi there is something seriously wrong with my PC.... when i go into a game, as soon as the game is loading a level (after the menus), the computer crashes to desktop. The last time this happened the computer restarted itself 3 times and the windows error reporting said its been caused by a device driver, but all my drivers should be fine. Ive tried the real and Omega drivers for my radeon 9800 pro, and everything else is just standard stuff from the manufacturers websites... the games ive tried are rome: total war and HL2...

A:"ERROR CAUSED BY A DEVICE DRIVER" -help!

Hello There,

Have you gone into the Device Manager and looked to see if there are any yellow or red marks by any of your devices that might indicate an error in the device driver?????

My expeience with Omega drivers is that they should not cause any trouble and in fact are usually more stable than the Standard drivers. Just my experience, some others on here may have had a different experience so we will wait to hear from them.

Read other 3 answers
RELEVANCY SCORE 82

Hi, can someone take a look at this Hijack This log? I'm new to all this and all of a sudden I'm getting a GAZILLION pop ups and these strange "sponsored links" when viewing ANY web pages. In addition, I'm getting these strange little icons on my desktop (for instance: poker, jam, Ipod Nano, etc). I right clicked on them and in properties it says "consumeralertsystem.com." This happened all of a sudden!

Thanks! Have a good day,

Leigh

Logfile of HijackThis v1.98.0
Scan saved at 12:30:53 PM, on 11/5/2005
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\spoolsv.exe
C:\PROGRA~1\COMMON~1\aol\ACS\acsd.exe
C:\WINDOWS\system32\cisvc.exe
C:\WINDOWS\System32\CTsvcCDA.exe
C:\WINDOWS\System32\nvsvc32.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\wanmpsvc.exe
C:\WINDOWS\System32\MsPMSPSv.exe
C:\Program Files\iPod\bin\iPodService.exe
C:\WINDOWS\System32\HPZipm12.exe
C:\WINDOWS\System32\svchost.exe
C:\WINDOWS\system32\cidaemon.exe
C:\WINDOWS\system32\cidaemon.exe
C:\WINDOWS\system32\winlogon.exe
C:\WINDOWS\Explorer.EXE
C:\Program Files\Microsoft AntiSpyware\gcasDtServ.exe
C:\WINDOWS\System32\DSentry.exe
C:\Program Files\Roxio\Easy CD Creator 5\DirectCD\Direc... Read more

A:Weird "sponsored links" in webpages. Consumer Alert System?? ...HJT log included

You are using an outdated version of HiJackThis. Please click on the link below to download the latest version: HiJackThis_sfx.exe
1. Delete your current HiJackThis.exe file
2. Double-click on the file you just downloaded.
3. Click on the "Unzip" button to install the newer version.
4. It will by default install to the directory - C:\PROGRAM FILES\HIJACKTHIS\

I require a new HJT log to be from this newer version

Read other 1 answers
RELEVANCY SCORE 82

I am infected with this crap and have used the following tools to try to get rid of it:
Windows Defender, Unible PowerSuite (SpeedUpMyPC, Registry Booster & Spyware Protector) and Norton's One Button Checkup and WinDoctor.

Not sure if it's related, but my DISPLAY is locked at 640 X 480.

Atempted the 5 Step Process before posting and Panda ActiveScan froze and crashed after scanning 59253 files, but not before identifying 28 spyware files.

Here's my extra.txt log from Deckard's:

Deckard's System Scanner v20071014.68
Extra logfile - please post this as an attachment with your post.
--------------------------------------------------------------------------------

-- System Information ----------------------------------------------------------

Microsoft Windows XP Home Edition (build 2600) SP 2.0
Architecture: X86; Language: English

CPU 0: Intel(R) Pentium(R) 4 CPU 2.80GHz
Percentage of Memory in Use: 36%
Physical Memory (total/avail): 1277.95 MiB / 810.39 MiB
Pagefile Memory (total/avail): 1516.89 MiB / 1165.44 MiB
Virtual Memory (total/avail): 2047.88 MiB / 1930.88 MiB

A: is Removable (No Media)
C: is Fixed (NTFS) - 37.21 GiB total, 18.7 GiB free.
D: is CDROM (CDFS)

\\.\PHYSICALDRIVE0 - ST340014A - 37.25 GiB - 1 partition
\PARTITION0 - Unknown - 39.19 MiB
\PARTITION1 (bootable) - Installable File System - 37.21 GiB - C:



-- Security Center -------------------------------------------------------------

AUOptions is scheduled... Read more

A:Netsky Worm-Popups-The Three Icons - "Error Cleaner" "Privacy Protector" "Spyware..."

Bump.

Read other 14 answers
RELEVANCY SCORE 82

I am trying to use the fsutil file setshortname to set "Program Files" to PROGRA~1,

but the system is giving me an "Error: Access is denied" response.
what I have typed:
Microsoft Windows [Version 6.3.9600]
(c) 2013 Microsoft Corporation. All rights reserved.
C:\Windows\system32>cd /d D:\
D:\>fsutil.exe 8dot3name set 0
The registry state is now: 0 (Enable 8dot3 name creation on all volumes).
D:\>fsutil file setshortname "Program Files" PROGRA~1
Error:  Access is denied.
And I try it in Safe Mode.It is also "Access is denied.".
Can someone
help me?

A:"fsutil file setshortname "Program Files" PROGRA~1"=>"Error:Access is denied."

Hi TimFF,
This might be related with the UAC settings, check this thread:
give full permission for the users in program
files folder
The steps in the above thread is not recommended.
For the short name usage, we may consider to create a directory-junction from
PROGRA~1 to C:\Program Files:
With the following commands:
mklink /J "C:\PROGRA~1" "C:\Program Files"
Reference:
Mklink
Best regards


Michael Shao
TechNet Community Support

Read other 3 answers