Over 1 million tech questions and answers.

[SOLVED] BSOD - Windows and Memtest freezing

Q: [SOLVED] BSOD - Windows and Memtest freezing

Hello, I recently upgraded to a new computer (less than 2 months ago), built the system myself and had it running very smoothly up until this last week. The last few days I have received 5 blue screens, with 3 occurring today alone. Today I also experienced two complete freezes, where the computer would respond to nothing for 15 or 20 minutes and required a hard restart. The first freeze occurred inside Windows, the second while I was running the first pass of tests in Memtest. The blue screens seem to occur both before I log in (the computer will have just been started up and left at the login screen when it crashes after 10 minutes or so) or while I am working in Windows. Can anyone help me out? Thanks in advance if you can, I've attached the reports as per these instructions: http://www.techsupportforum.com/foru...ta-452654.html

? OS - Windows 7 Professional SP1 x64 (original OS)
? OS is a student edition, not OEM
? Age of all system components < 1 year (GPU and PSU are oldest while the rest are brand new)
? Age of OS installation < 2 months

? CPU - Intel i7 2600
? GPU - MSI nVidia 460GTX 768mb
? Mobo - MSI P67A-GD65
? PSU - 730W

? Manufacturer - Self-built

RELEVANCY SCORE 200
Preferred Solution: [SOLVED] BSOD - Windows and Memtest freezing

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: [SOLVED] BSOD - Windows and Memtest freezing

Freezing of MemTest is not a good thing. This is most likely a hardware problem (and the BSOD memory dump analysis below tends to confirm this).
Try other memory tests (such as MemTest86, MemTest86+, Windows Memory Diagnostic, Prime95, etc

Try testing the sticks one at a time and in each slot to see if there's a pattern that you can see (to determine if the sticks or the slots are bad).

Start with these free diagnostics and stress tests:

Quote:




I suggest starting all troubleshooting with the following diagnostic tests. They'll save you a lot of time and heartache if there is a hardware failure, and you'll have the disks on hand in case you need them in the future:

Quote:




H/W Diagnostics:
Please start by running these bootable hardware diagnostics:
Memory Diagnostics (read the details at the link)
HD Diagnostic (read the details at the link) - Test ALL of the hard drives.

Also, please run one of these free, independent online malware scans to ensure that your current protection hasn't been compromised: Free Online AntiMalware Resources (read the details at the link)
There are also free, bootable antivirus disks at this link: Free Online AntiMalware Resources - Bootable Disks




Then
I'd try these free stress tests:

Quote:




FurMark download site: FurMark: VGA Stress Test, Graphics Card and GPU Stability Test, Burn-in Test, OpenGL Benchmark and GPU Temperature | oZone3D.Net
FurMark Setup:
- If you have more than one GPU, select Multi-GPU during setup
- In the Run mode box, select "Stability Test" and "Log GPU Temperature"
Click "Go" to start the test
- Run the test until the GPU temperature maxes out - or until you start having problems (whichever comes first).
NOTE: Set the alarm to go off at 90?C. Then watch the system from that point on. If the system doesn't display a temperature, watch it constantly and turn it off at the first sign of video problems. DO NOT leave it it unmonitored, it can DAMAGE your video card!!!
If the temperature gets above 105?C, quit the test - the video card is overheating.
- Click "Quit" to exit





Quote:




Prime95 download site: Free Software - GIMPS
Prime95 Setup:
- extract the contents of the zip file to a location of your choice
- double click on the executable file
- select "Just stress testing"
- select the "Blend" test. If you've already run MemTest overnight please run the "Small FFTs" test instead. (run all 3 if you find a problem and note how long it takes to error out with each)
- "Number of torture test threads to run" should equal the number of CPU's times 2 (if you're using hyperthreading).
The easiest way to figure this out is to go to Task Manager...Performance tab - and see the number of boxes under CPU Usage History
Then run the test for 6 to 24 hours - or until you get errors (whichever comes first).
Monitor the CPU temperature and DON'T let it exceed 85?C. If it does, then you probably have a CPU cooling problem.
This won't necessarily crash the system - but check the output in the test window for errors.
The Test selection box and the stress.txt file describes what components that the program stresses.
More details on the use of this test: Torture test your CPU with Prime95





Quote:




More Video Stress Tests:
1. Thanks to VirGnarus for finding this test: https://simtk.org/home/memtest
2. Two other video stress tests (may be more stressful than FurMark):
NOTE: I have had reports that some ISP's will block this website
Video Memory stress Test - ???* NVIDIA / ??????? / VMT
Artifact Locator - ???* NVIDIA / ??????? / Artifact Locator
Sorry, but I don't read the language that this website is made in.
3. Another interesting test that came to my attention: Download - OCCT Website english
USE AT YOUR OWN RISK - the program doesn't have a whole bunch of safety features to protect you from yourself!





Quote:




CPU Stress Tests:
- http://downloadcenter.intel.com/Deta...19182&lang=eng
- 7Byte : Hot CPU Tester Pro
- 7Byte : BurnIn64
- CPU Stress test - Overclock.net - Overclocking.net
- Fossil Free Online CPU Load or Stress Test.
- CPU Stability Test description, System Resources Tune-Up. Downloads List By All Time Popularity | PCWorld | PCWorld
- CPU Stress test - Overclock.net - Overclocking.net
- |MG| CPU Stability Test 6.0 Download
- LinX - A simple Linpack interface









perfmon and MSINFO32 show these drivers are missing. PLease install the chipset drivers for your motherboard:

Quote:




SM Bus Controller PCI\VEN_8086&DEV_1C22&SUBSYS_76811462&REV_05\3&11583659&0&FB The drivers for this device are not installed.

PCI Simple Communications Controller PCI\VEN_8086&DEV_1C3A&SUBSYS_76811462&REV_04\3&11583659&0&B0 The drivers for this device are not installed.




The lack of a pattern in the BSOD memory dumps also suggests a hardware cause - as does the actual cause cited in some of the memory dumps:
BSOD BUGCHECK SUMMARY

Code:

Loading Dump File [C:\Users\FUBAR\_jcgriff2_\dbug\__Kernel__\082611-25802-01.dmp]
Built by: 7601.17640.amd64fre.win7sp1_gdr.110622-1506
Debug session time: Fri Aug 26 23:39:35.931 2011 (UTC - 4:00)
System Uptime: 0 days 0:10:08.806
Probably caused by : hardware ( nt!ObpWaitForMultipleObjects+273 )
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0x3B
PROCESS_NAME: audiodg.exe
FAILURE_BUCKET_ID: X64_IP_MISALIGNED
Bugcheck code 0000003B
Arguments 00000000`c0000005 fffff800`031cf75e fffff880`09b83970 00000000`00000000
BiosVersion = V1.11
BiosReleaseDate = 04/20/2011
CPUID: "Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz"
MaxSpeed: 3400
CurrentSpeed: 3392
??????????????????????????????????????????????????????????????????????????????????????``
Loading Dump File [C:\Users\FUBAR\_jcgriff2_\dbug\__Kernel__\082611-19437-01.dmp]
Built by: 7601.17640.amd64fre.win7sp1_gdr.110622-1506
Debug session time: Fri Aug 26 23:28:14.022 2011 (UTC - 4:00)
System Uptime: 0 days 0:22:54.896
Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+14382 )
BUGCHECK_STR: 0x1a_41201
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
PROCESS_NAME: MsMpEng.exe
FAILURE_BUCKET_ID: X64_0x1a_41201_nt!_??_::FNODOBFM::_string_+14382
Bugcheck code 0000001A
Arguments 00000000`00041201 fffff680`00018ed8 00000000`00000001 fffffa80`0e888b60
BiosVersion = V1.11
BiosReleaseDate = 04/20/2011
CPUID: "Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz"
MaxSpeed: 3400
CurrentSpeed: 3392
??????????????????????????????????????????????????????????????????????????????????????``
Loading Dump File [C:\Users\FUBAR\_jcgriff2_\dbug\__Kernel__\082611-16380-01.dmp]
Built by: 7601.17640.amd64fre.win7sp1_gdr.110622-1506
Debug session time: Fri Aug 26 16:07:01.801 2011 (UTC - 4:00)
System Uptime: 0 days 1:30:27.675
Probably caused by : fltmgr.sys ( fltmgr!DeleteNameCacheNodes+143 )
BUGCHECK_STR: 0x19_20
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
PROCESS_NAME: System
FAILURE_BUCKET_ID: X64_0x19_20_fltmgr!DeleteNameCacheNodes+143
Bugcheck code 00000019
Arguments 00000000`00000020 fffff8a0`08ad1640 fffff8a0`08ad17e0 00000000`051a030c
BiosVersion = V1.11
BiosReleaseDate = 04/20/2011
CPUID: "Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz"
MaxSpeed: 3400
CurrentSpeed: 3392
??????????????????????????????????????????????????????????????????????????????????????``
Loading Dump File [C:\Users\FUBAR\_jcgriff2_\dbug\__Kernel__\082311-431576-01.dmp]
Built by: 7601.17640.amd64fre.win7sp1_gdr.110622-1506
Debug session time: Tue Aug 23 17:29:23.028 2011 (UTC - 4:00)
System Uptime: 0 days 4:28:13.902
Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+46485 )
BUGCHECK_STR: 0x1a_41287
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
PROCESS_NAME: wmplayer.exe
FAILURE_BUCKET_ID: X64_0x1a_41287_nt!_??_::FNODOBFM::_string_+46485
Bugcheck code 0000001A
Arguments 00000000`00041287 00000000`00000030 00000000`00000000 00000000`00000000
BiosVersion = V1.11
BiosReleaseDate = 04/20/2011
CPUID: "Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz"
MaxSpeed: 3400
CurrentSpeed: 3392
??????????????????????????????????????????????????????????????????????????????????????``

Read other 3 answers
RELEVANCY SCORE 67.2

Here's my problem,

I've put together a new computer for a friend of mine the stat's of which are;

Intel e8400 3.0ghz
Gigabyte Ep45-ds3l motherboard BIOS revision f4 and f7 (updated on the first motherboard)
2X2gb OCZ 1066 platinum ram
2X750Gb WD greenpower hdds Sata
Pioneer 215 BK DVD burner Sata
MSI 9800GT OC edition
500w Coolermaster extreme power pro PSU 2 X 18 amp 12v rails
In a Coolermaster Centurion RC330 case

Posted fine but took nearly 30 secs to post on startup.
I got Windows XP to install and latest drivers. and it started freezing randomly usually while copying files pver network or running 3d mark 06, and memtest to check for stability. no errors come up i.e. BSOD for windows or memory errors for memtest, 'IT JUST FREEZES'. I've swapped out the ram, Powersupply, Videocard, and BIOS updated and bench tested the first motherboard as well as disconnected hdd's during memtest, and used a different optical drive(IDE), all of which still froze in memtest/3d mark. I've even plugged the computer into another outlet to rule out power current problems. While at the place that i purchased most of the computer parts from the powersupply tested fine, and the motherboard, with my own ram and CPU in it did not freeze during memtest, but it did take nearly 30 secs to post and they replaced it with another board. Brought it back home and it still freezes during memtest..... I'm at a loss does anyone have any suggestions????!!!!

oth... Read more

A:Solved: Memtest freezing in new build

Read other 13 answers
RELEVANCY SCORE 60.4

so I got a computer that keeps freezing up on me. sometimes it runs for hours before hanging, and sometimes it hangs every 5-10 minutes.

I ran memtest and it seemed to freeze up during memtest. the little blinking icon was normal, but the test wasnt running and the commands didnt work.

does this mean that my memory sticks are bad?
 

A:freezing computer.(memtest freezing aswell)

Read other 16 answers
RELEVANCY SCORE 58.8

Can someone confirm if my memory is bad?

The day before yesterday I was converting a video file and got a BSOD. Then upon restarting the windows machine I got another blue screen on startup. This continued for about 3 more tries before I got windows started without crashing. Although today it has been fine and has not crashed I decided to run Memtest86 and found that it got about 712 errors during test 6 [Moving inversions, 32 bit pattern].

BTW, my machine has 2Gb of DDR400 in dual channel

I was reading up and the forums and came across this thread[HERE] that said it may be the DDR socket in the mobo. Which i decided to check for myself:

Test 2: Memory stick 1(1Gb); Memory slot A1

680 Errors - Test 6 [Moving Inversions, 32 bit pattern]
Test 3: Memory stick 2(1Gb); Memory slot A1

2 Errors - Test 4 [Moving Inversions, Random Pattern]
691 Errors - Test 6 [Moving Inversions, 32 bit pattern]
Test 4: Memory stick 1; Memory slot A2

688 Errors - Test 6
Test 5: Memory stick 2; Memory slot B1

2 Errors - Test 4
680 Errors - Test 6

My question is, this would signify that my memory is at fault, correct? And not my mobo? I just want to make sure before I RMA them.
 

A:Solved: BSOD's galore. Memtest failed. Bad memory?

Read other 7 answers
RELEVANCY SCORE 55.6

A few week ago I started having issues with my GPU freezing while in game, sometimes not freezing but the screen would turn black. The ATI Utitlity can sometimes recover from the error but most of the time I have to reset my computer. Unplugging my computer / turning my PSU off and on can extend my use of computer without freezing.

I had a feeling that it might be the video card but I tried testing my ram modules anyways jsut to be sure. I cant complete a single memtest (freezing) if I occupy more than 1 slot. I can finish a test if I use one module on one slot. Anything more, the test would freeze.

A few hours ago, I tried test my memory slots to test out which of the four is the fault one. But the same thing happens, I cant finish a test with more than one slot occupied. I dont know if this is related to my GPU problem.. but its one of my problems now.

After doing all these test... I cant properly boot now.. I cant get to the POST screen but i could the screen would freeze just before the OS loads. I tried resetting my CMOS but it doesnt work either.

Any ideas?

EDIT:

Im adding to note that my northbridge chipset fan is faulty.. but it does turn and provide airflow.. It slows down then accelerates but doesnt completely stop
 

Read other answers
RELEVANCY SCORE 53.6

Hi there,

I recently went to a link, I am not sure that I got a virus or not, or if I am having a random hardware issue all of a sudden.
I did remove a Virus called Rogue: FakeYak though.

I am still having issues though, I took pictures of the Blue screens on my phone:



I also tried to run the repair tool, that didn't do much good.

I have now gotten into windows normally, but whenever I click on a program the computer completely locks up.

Please help!
 

A:Solved: BSOD Windows 7 and programs freezing

Try booting into Safe Mode and then run anti-virus programs such as:
MalwareBytes: Anti-Malware
Spybot: Search & Destroy
SUPERAntiSpyware
Spyware Doctor
Let me know how this goes
*SE
 

Read other 2 answers
RELEVANCY SCORE 53.6

Ok, so i have been running windows 7 for a couple of years now with no problem. recently it has been freezing. the freeze takes place within typically 2-5 minutes of being in the operating system. there is no BSOD, the image on the screen freezes and i have to do a hard reboot. i hadn't changed anything. since this started i have tried: cleaning the registry, running memory diagnostics. running chkdsk, and defragging. i am about to pull all of my hair out.

I was trying to run the programs that im supposed to post the results of, but the system keeps freezing before it can complete.

Specs:
Windows 7 Ultimate 32-bit Retail
Pentium 4 3.2GHz
1Gb RAM
Nvidia Geforce 6200 256mb
Mobo: Asus p4p800 SE
PSU: Antec 500 watt

A:[SOLVED] Bsod-windows 7 randomly freezing.

Can you run Windows through safe mode with networking?

Read other 6 answers
RELEVANCY SCORE 52.8

I am in the process of fixing a friends computer that has Vista installed. The computer is very slow, would freeze and occasionally get the BSOD. I performed many Anti-Virus scan's and it detected a couple of trojans which I removed. Also did disk clean up, disk check, sfc/scannow, deleted cookies, temp files, defrag, Updated the video card driver, deleted some old programs and files. I turned off some services and start up items. This all seems to have really helped the overall performance and speed. I am trying to multi-task, to see if the BSOD will come back and so far it hasn't. It does randomly freeze sometimes, but I think most Vista machines do this. Any tips on speeding up the shutdown as it just hangs for a few minutes before turning off. Thanks.
 

A:Solved: Windows Vista slowness/freezing/BSOD!

Read other 9 answers
RELEVANCY SCORE 51.6

So today I booted my computer only to find that Windows telling me my Windows copy wasn't genuine with the "Build 7600" next to it. It IS registered, and this occured after I got a BSOD. I can't use my computer without the screen freezing, turning black, and then showing fragments of the desktop and then repeating. (I am using Safe Mode as I type this)

I have been getting BSODs for a while now, and have tried so many things to fix it before with nothing working. I tried using Memtest +86 to try and see if I had bad RAM, but it found 0 issues. I seriously doubt it has anything to do with my registry. My RAM sticks are in the right place.

Here's a screenshot of my BlueScreenView:



Uploaded with ImageShack.us

I couldn't get PERFMON to work, so all I have is my .dmp files, sorry about that.

Is Windows 7 . . .
- x86 (32-bit) or x64 ? 64-bit
- the original installed OS on the system? Yes
- an OEM or full retail version? Full Retail version
- OEM = came pre-installed on system
- Full Retail = you purchased it from retailer

- What is the age of system (hardware)? Running since July 2011, 3 months.
- What is the age of OS installation (have you re-installed the OS?) Reformatted once, on September 19, 2011

A:BSOD after Memtest said nothing wrong, "your windows is not genuine"

  
Quote: Originally Posted by brentfindley


So today I booted my computer only to find that Windows telling me my Windows copy wasn't genuine with the "Build 7600" next to it. It IS registered, and this occured after I got a BSOD. I can't use my computer without the screen freezing, turning black, and then showing fragments of the desktop and then repeating. (I am using Safe Mode as I type this)

I have been getting BSODs for a while now, and have tried so many things to fix it before with nothing working. I tried using Memtest +86 to try and see if I had bad RAM, but it found 0 issues. I seriously doubt it has anything to do with my registry. My RAM sticks are in the right place.

Here's a screenshot of my BlueScreenView:

Uploaded with ImageShack.us

I couldn't get PERFMON to work, so all I have is my .dmp files, sorry about that.

Is Windows 7 . . .
- x86 (32-bit) or x64 ? 64-bit
- the original installed OS on the system? Yes
- an OEM or full retail version? Full Retail version
- OEM = came pre-installed on system
- Full Retail = you purchased it from retailer

- What is the age of system (hardware)? Running since July 2011, 3 months.
- What is the age of OS installation (have you re-installed the OS?) Reformatted once, on September 19, 2011


Disk hardware error. Please run chkdsk and then download the mfr HD app and run it.
A- CHKDSK /R /F:

Run CHKDSK /R /F from an elevated (Run as administrator) Command Prompt.
... Read more

Read other 5 answers
RELEVANCY SCORE 50.4

RAM: F3-10666CL9Q-16GBRL
MOBO: GA-870A-UD3
GRAPHICS: EVGA 01G-P3-1370-TR GeForce GTX 460 (Fermi) 1GB
CPU: AMD Phenom II X4 840 3.2GHz 4 x 512KB L2 Cache
OS: Windows 7 Ultimate 64bit

I just built this box a week ago and have been getting random BSOD's
0x0000003B
0x0000001E
dxgmms1.sys
seem to be the recurring culprits.

I have run memtest86 and am part way done. These are the errors I have so far.

Failing Address GOOD BAD Err-Bits
001c1e401d0- 7198.2MB fffffdff f7fffdff 08000000
001c5e401b0- 7262.2MB fffffdff f7fffdff "
0027be47690-10174.2MB 7fffffff 77ffffff "
0027fe475f0- 10238.2MB 7fffffff 77ffffff "
003f9740ad0- 16279.2MB ffffffff f7ffffff "
003fd740a30- 16343.2MB ffffffff f7ffffff "

I have no idea how to read these. I know there is a problem now with the memory but don't know if it lies with the motherboard or the RAM.
Also, the dxgmms1.sys apparently refers to DirectX so that makes me think it's a video card issue.

Any other details you need to know feel free to ask. I just really want to get this figured out. Thanks for the help.

A:BSOD's and Memtest Errors

sorry the spacing on my memtest86 readout didn't keep but I think you get the idea

Read other 2 answers
RELEVANCY SCORE 50.4

Hi all, I'm after experiencing an onslaught of BSOD's today, each with a different error code.
Also, After doing a MemTest, on the first Pass, It counted up a total of 200'000+ errors
I restarted the Memtest after getting over 200'000 errors (it tending to go on and on and on . . .), and on the first pass it read up no errors.
I am heavily confused and worried, can anyone give me some help on the matter?
Attached is the Windows 7 Diagnostic folder.
Thanks!

A:Many BSOD's and very bad MemTest Results

You clearly must have RAM or motherboard problems, follow these steps:RAM - Test with Memtest86+
Run Memtest86+ for least 7-8 passes, and preferably overnight as it can take a while to fully complete.

Test each RAM stick individually, if an error is found then move the same RAM stick into the next DIMM slot and test again, if errors are found for the same RAM stick in every available slot then you have a faulty RAM module. On the other hand, if no errors are found in the next slot or the other slots for the same RAM module, then you have a faulty DIMM slot.

Test each RAM stick and every motherboard DIMM slot available.








  
Quote: Originally Posted by Arc


testSlot1Slot2RAM1ErrorErrorRAM2GoodGood It is a RAM, a bad RAM.

But if you have got a result like that:
testSlot1Slot2RAM1ErrorGoodRAM2ErrorGood It is a motherboard issue. The particular slot is bad.

Read other 1 answers
RELEVANCY SCORE 50.4

Hi guys. I've noticed how helpful everyone is on this forum and I'm happy that I found it. I'm not very experienced with PC diagnostics/tests but I learn pretty quick. I was hoping to get some help.

I've been having erratic BSoD's for over a week with errors around Memory_mgmt , bad pool header, dxgkrnl etc. and they occur in normal use/browsing, gaming and even when idle sometimes. I read that memtest would help so I ran it and from how it looks so far, it looks like my RAM sticks are pretty much annihilated! Oddly enough I can browse and sometimes run games fine even with this many errors.

Before going into the detailed BSoD diagnostics as instructed in the BSOD thread - is it safe to assume my RAM may be causing all my issues? I had to get the RAM dimms changed 2 weeks after purchasing the PC and these new ones have been fine for many months (about 4-6 months) until the past week. It has been gradually getting worse and now it's too bad to ignore restart and carry on with life. Maybe it's a compatibility issue?

Gigabyte mobo Z77-D3H
Intel core i5-2500k
4gb Cosair ddr3 (x2) dual-channel
Radeon HD9600

EDIT: I forgot to mention that I also formatted my windows drive last night as I saw a bunch of system files were messed up after running sfc scan. It didn't fix it ofc. The memtest image attached is happening as I type this

A:BSOD (memtest question)

I highly doubt your ram is incompatable, it is possible although unlikely that your cpu cache is bad try turning it off and running memtest again does the error still occur? What voltages is the bios reporting on your hardware?

Read other 3 answers
RELEVANCY SCORE 50.4

Hi folks,
Getting BSOD on my little MSI U100 quite consistently. Disks are almost empty, 2G RAM. Wifi not activated, neither is the camera.
Running chkdisk and defrags works for a bit, but then BSOD comes back.
Set it for a full dump in order to have time to see the errors and suggestions.
XP 2 Pro, SP3.
Found the memtest (3.5) ISO file, burned a CD.
MSI has no floppy, nor own CD.
Changed the boot sequence, booted from external CD/DVD drive (USB variety)
It went through some motions, created partitions, assigned to itself drive A: , booted into DOS and sitting there fat and happy doing nothing. Does not run the memtest.
Doesn't see the ISO memtest file. Sees some Ahead files Nero put on and that's all.
I checked the disk on another laptop, with a native CD drive - it does see the ISO file ok.
So, what am I doing wrong? What else can I do to check the memory?
Or just submit the dump file for your review?
I'm not well versed in admin endeavors, so please spell out the suggestions like you would to a semi-retard.
Thanks!
Nut.
 

Read other answers
RELEVANCY SCORE 50.4

Hi all, need help. I have posted a BSOD issue and and in order to detect possible memory problem, i have execute Memtest-86 v4.0 (bootable) but after 8 minutes working, my PC has begin to ...BEEP! BEEP! BEEP!

I have stooped process and redo it to take some pictures.

While the process, in window memtest did not show any info about errors so i dont know what is happen!

Zip add in post contains Memtest-86 pictures with all info, summary is...

Picture, Pass, Test, Interactions, Time, Beep/snooze

1, 3%,#1, 2,0:00:15, Silence...
2,15%,#3, 2,0:01:57, Silence...
3,29%,#6,10,0:04:14, Silence...
4,41%,#8, 1,0:06:29, Silence...
5,50%,#8, 1,0:08:40, Silence...
6,51%,#8, 1,0:09:12, BEEP!
7,52%,#8, 1,0:09:18, BEEP!
8,52%,#8, 1,0:09:24, BEEP!
9,53%,#8, 1,0:09:32, BEEP!

Fearing an internal damage, stoped process with ESC because beep was continuous.

?Is normal to hear beep during process?

?Can i run program to the end with no problem for my PC?

Please, help

Thanks in advance.
Best regards.

A:Need help with a BSOD and Memtest-86 test

Reset your BIOS values to defaults and stop any overclocking
3 Beeps means defective RAM, you should test each sticks individually with memtest then replace the damaged ones

Read other 3 answers
RELEVANCY SCORE 49.6

Here's my Sys specs:

GIGABYTE GA-890FXA-UD5 AM3 AMD 890FX SATA 6Gb/s USB 3.0 ATX AMD Motherboard
SAPPHIRE 100290SR Radeon HD 5870 (Cypress XT) 2GB 256-bit GDDR5 PCI Express 2.1 x16 HDCP Ready CrossFireX Support Eyefinity 6 Edition Video Card
Rosewill Libertas Series LIB-650 650W Continuous @40?C,80 PLUS Certified, Full Modular, ATX12V v2.3/EPS12V v2.92,SLI Ready, CrossFire Ready, Active PFC, Compatible with Core i7, i5 Power Supply
AMD Phenom II X6 1090T Black Edition Thuban 3.2GHz Socket AM3 125W Six-Core Desktop Processor HDT90ZFBGRBOX
GeIL Black Dragon 8GB (4 x 2GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Desktop Memory Model GB38GB1600C9QC
HITACHI Deskstar H3IK10003272SP (0S02860) 1TB 7200 RPM SATA 3.0Gb/s 3.5" Internal Hard Drive
ASUS DRW-24B1ST/BLK/B/AS Black SATA 24X DVD Burner - Bulk - OEM
Rosewill RK-7310 Black USB Wired Super Slim Multimedia Keyboard
Microsoft Windows 7 Home Premium Full
Rosewill RNX-N180PCe PCI Express Revision 1.1 Wireless Adapter

Hello all:

My system is unstable and I've decided to finally do something about it. I get BSOD's fairly regularly. I'd attach the dumps but I'm writing this from the office computer so it's going have to wait. Checking the 50+ dumps, the bulk of the crashes come from ntoskrnl.exe/ntkrnlpa.exe/atikmdag.sys. The "nt" are apart of the kernel so I really doubt that's the root of the problem, it's something else I'm sure. The ATI, is from the GPU but not real sure what's causing it. Catalyst an... Read more

A:Memtest Fail Questions & BSOD's

Did you try the sticks one by one in the other slots?
(That's how you determin if it's the RAM itself or the slot that is bad. It's rather uncommon that all RAMs give up the same time (unless a surge ran through the comp caused by a thunderstorm or by false handling (static charges)

-DG

Read other 9 answers
RELEVANCY SCORE 49.6

Hi, after getting the BSOD many times, reinstalling windows and trying to debug i still have no idea how to fix my brand new system

I just bought a dell xps 9100 with 12gbs of ram and im assuming that its faulty because memtest returned 18000+ errors in around 10 minutes of checking..

Now that i know there are many errors, what do i do about it?!

Id really like to notsend it into dell because i need it for school....
Can anyone help me please !?
Thanks in advance!

A:MemTest Over 18688 Errors! BSOD help please!!

  
Quote: Originally Posted by AlexBSOD


Hi, after getting the BSOD many times, reinstalling windows and trying to debug i still have no idea how to fix my brand new system

I just bought a dell xps 9100 with 12gbs of ram and im assuming that its faulty because memtest returned 18000+ errors in around 10 minutes of checking..

Now that i know there are many errors, what do i do about it?!

Id really like to notsend it into dell because i need it for school....
Can anyone help me please !?
Thanks in advance!


If it is under warranty and you narrow down which stick (or sticks) it is dell might send you the RAM, but would you be able to put it in yourself?

I would let Dell do it just in case it is more than just that.

Read other 3 answers
RELEVANCY SCORE 49.6

Windows 7 32 bit
2.4Ghz 1M 533
2x512mb ddr 333 PC2700
Nvidia P162
WD 80gb ide drive

Constant BSOD opening program like cpu-z, SIW 2011, etc...despite 24+ hours no errors in Prime95 Small FTTs, 11+ hours no errors in Prime95 Blend, 24+ hours in both memtest86+ and windows memory diagnostic no errors, pass WD diagnostic, etc. Any help would deeply appreciated. Thanks in advance.

A:BSOD despite no errors in prime95, memtest, etc

  
Quote: Originally Posted by virtuman1980


Windows 7 32 bit
2.4Ghz 1M 533
2x512mb ddr 333 PC2700
Nvidia P162
WD 80gb ide drive

Constant BSOD opening program like cpu-z, SIW 2011, etc...despite 24+ hours no errors in Prime95 Small FTTs, 11+ hours no errors in Prime95 Blend, 24+ hours in both memtest86+ and windows memory diagnostic no errors, pass WD diagnostic, etc. Any help would deeply appreciated. Thanks in advance.


The cause of the BSOD is Related to cpuz135_x32.sys CPUID service from CPUID. I would remove it

Read other 1 answers
RELEVANCY SCORE 49.6

Hello, I have started receiving different blue screens over the past week that seem to be caused by ntoskrnl.exe. Everything I have read points to a memory issue, so I let a memtest run over night with no errors. I have removed my overclock and the issue continues. Temperature on my machine is fine as well. Any advice would be appreciated.  Some of the times the machine does not bluescreen, it just reboots without an error message and then powers right back in to windows. My part list is as follows:Gigabyte Z170 Gaming 7Core i5-6600kSamsung Evo 850 500gbEVGA 650W PSUEVGA GTX 1080 SCCorsair Vengeance LPX 16GB (4 x 4GB) DDR4 2800MHzScythe Cooling Motherboard SCKTT-1000 CPU fan

A:ntoskrnl.exe BSOD with clean memtest

adding permon zip and dumps from running driver verifier.  Also I would like to add, I a missing the driver for the bigfoot ethernet controller because it was giving me issues.  I am using the intel ethernet adapter.  Thanks again for any help.

Read other 3 answers
RELEVANCY SCORE 49.6

Right where to start...

I have built a custom PC, needless to say its not my first so I knew what I was doing.
I installed Windows 7 64 Ultimate to it and had it up and running fine, it ran for hours then blue screened on me, I thought it might have been a one off so tried again and it kept blue screening randomly.. no warning signs and not after a set time or a start up of a program, just randomly.

Decided to run Memtest on all 4x 4Gig sticks of corsair vengeance. They all passed twice. Took a hour for each stick to pass twice.
That made me think it wasn't the memory seeing as they were brand new and then tested with memtest.

I then tried to test the computer with only one stick in memory slot 1... still crashed.. memory slot two... still crashed and 3 and 4 still blue screening on all ports.

I tried reinstalling windows and drivers for everything about 6 times. Same issue continued.
Even removed Graphics card and ran without encase it was that causing a issue, and still same thing happened.

Brought another motherboard with same cu/memory slots etc to replace the current mobo so that I could rule out the mobo being the problem. even with new mobo fitted it still crashes.

Only other things it could be in my head is the CPU/PSU or HDD???

I have a mem dump but its about 700meg and is only of one BSOD from fresh install with new mobo no gfx card and basic setup no extras installed other than drivers..

Read this... Crash Reports - Read
Followed instruc... Read more

A:Random BSOD, Tried everything even new Motherboard and Memtest+

The zip you uploaded does not contain any crash dump.

Follow it: Dump Files - Configure Windows to Create on BSOD
Go to Option Two, Point 2. Download the .reg file and merge it in registry by double clicking it.

After the next BSOD, search the .dmp files manually in the default path: C:\Windows\Minidump or %SystemRoot%\Minidump. Post it following the Blue Screen of Death (BSOD) Posting Instructions.

And, as a test, uninstall CPU-z. It is probleming; but at this stage and with the data we have, it is tough to determine that the CPU-z itself is the reason behind the crashes.

Read other 1 answers
RELEVANCY SCORE 49.6

Hello, I have started receiving different blue screens over the past week that seem to be caused by ntoskrnl.exe. Everything I have read points to a memory issue, so I let a memtest run over night with no errors. I have removed my overclock and the issue continues. Temperature on my machine is fine as well. Any advice would be appreciated.  Some of the times the machine does not bluescreen, it just reboots without an error message and then powers right back in to windows. My part list is as follows:Gigabyte Z170 Gaming 7Core i5-6600kSamsung Evo 850 500gbEVGA 650W PSUEVGA GTX 1080 SCCorsair Vengeance LPX 16GB (4 x 4GB) DDR4 2800MHzScythe Cooling Motherboard SCKTT-1000 CPU fan

A:ntoskrnl.exe BSOD with clean memtest

adding permon zip and dumps from running driver verifier.  Also I would like to add, I a missing the driver for the bigfoot ethernet controller because it was giving me issues.  I am using the intel ethernet adapter.  Thanks again for any help.

Read other 1 answers
RELEVANCY SCORE 49.6

Hi, I have a desktop running XP SP3 that has occasional problems with the blue screen 0x0000008E error. The PC will always boot into safe mode and sometime will start normally.

The full error is:

0x0000008e (0xC0000005, Ox806F0753, 0xBA382470, Ox00000000)

Reading some of the posts on this forum suggests it could be a problem with the RAM and that running memtest should help. Thing is I can only find a link to download an ISO file, what do I do with that?

Thanks

Gav

A:Stop:0x0000008e bsod, what do I do with memtest?

Hi

You can download Memtest from here. Download the ZIP file, extract the ISO and write it to CD (Do not just copy the file to the CD). If you need help doing this here is a document that might help you.
Once written to CD, boot your PC with the CD and run Memtest. Allow the test to run through at least 3 passes or until it gives errors. If you have more than 1 memory module run the test on each module separately.

Read other 5 answers
RELEVANCY SCORE 49.2

Hi,

I have today had a bsod which said memory management, i have the mini dump files if required.

I dont understand why this is happening because i have checked my ram for 12 hours on memtest86 and it has come up with no errors, i have had no problems with my hardware before and since the crash i have completely reinstalled windows but i have had the bsod again.

Does anyone know what could be the problem, could it be motherboard / cpu / psu?

Also one side note i run my ram at stock settings from manufacturer, but i undervolt my cpu by a small amount however it is completely stable in stress tests so im not sure this would have any effect on ram either i just thought i would mention this incase.

A:MEMORY MANAGEMENT BSOD - No memtest errors! - Help please!

Yes we need the dump files.

Please follow the instructions in the link below and post all the information

Blue Screen of Death (BSOD) Posting Instructions

Read other 1 answers
RELEVANCY SCORE 49.2

Trying to figure out the cause of my BSOD's. They seem to be getting more and more frequent but I can't figure it out. I haven't found anything that seems to trigger them either. I remember seeing Memory Management, Special Pool Detected, and Page Fault In Non Paged Area but there may be more.. Sometimes I go a few days, other times it's only a few minutes before BS.

I've run MemTest over night a few times with no errors. I ran the driver verifier as well and got BSOD's. I've attached the requested .zip file containing the .dmp's. Any info would be greatly appreciated!

Edit: Just to note, I know one or two BSODs were related to the Panda antivirus.. I've since uninstalled it and have gone back to Windows

A:Intermittent BSOD - Can't Trigger - MemTest Clear

If I'm interpreting the analysis from WinDBG then it looks like the .dmp's are pointing to several .sys files/services...? The driver verifier ones are a bit more confusing. Can someone verify this? I suppose a re-installation of windows is in my future...

Edit: searching for those indicated files showed it was Panda for a the most recent ones. I'm seeing others that seem to indicate critical windows components..? Guess I should stop speculating at this point

Read other 2 answers
RELEVANCY SCORE 49.2

So over the past few months I have started getting blue screens. It started out slow, then got more and more progressive. I have run memtest a number of time and let it run for 24+ hours with no errors. I have reinstalled windows twice. It seems like I go for a while with no problems then one day it will crash a bunch of times. Today it kept crashing a few minutes after startup with errors like "Modification of system code or a critical data structure was detected" and common ones like "Bad pool header" or something.

I am really at a loss because I haven't installed any new hardware recently, all I can think of is Avira is causing it, but it used to work fine for years so I don't know....

I have attached the logs, any suggestions or ideas is greatly appreciated! Its getting annoying haha.

Thanks!

A:Multiple BSOD, Different Every Time. Memtest Passes.

These crashes were probably caused by Pool corruption.
Please run these two tests to verify your memory and find which driver is causing the problem.
If you are overclocking anything reset to default before running these tests.
In other words STOP!!!
1-Memtest.





Quote:
*Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Memtest86+ - Advanced Memory Diagnostic Tool

*Boot from the CD, and leave it running for at least 5 or 6 passes.

Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot.

Test the sticks individually, and if you find a good one, test it in all slots.

Any errors are indicative of a memory problem.

If a known good stick fails in a motherboard slot it is probably the slot.



RAM - Test with Memtest86+

2-Driver verifier






Quote:
Using Driver Verifier is an iffy proposition. Most times it'll crash and it'll tell you what the driver is. But sometimes it'll crash and won't tell you the driver. Other times it'll crash before you can log in to Windows. If you can't get to Safe Mode, then you'll have to resort to offline editing of the registry to disable Driver Verifier.

I'd suggest that you first backup your data and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Win7 Startup Repair featu... Read more

Read other 5 answers
RELEVANCY SCORE 49.2
A:BSOD problem (weird memtest result)

Welcome aboard. From your crash dump:

Code:
Use !analyze -v to get detailed debugging information.

BugCheck 1A, {5003, fffff70001080000, c906, 1943c009}

Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+29fd7 )

Followup: MachineOwner
From Carrona.org, STOP 0x0000001A: MEMORY_MANAGEMENT
Usual causes: Device driver, memory, kernel

At first, let us start for a faulting driver. In such a situation, it is better to enable Driver Verifier to monitor the drivers.

Driver Verifier - Enable and Disable

Run Driver Verifier for 24 hours or the occurrence of the next crash, whichever is earlier.

Let us know the results, with the subsequent crash dumps, if any.

EDIT: As you got errors in memtest, you should replace the RAM sticks.

Read other 4 answers
RELEVANCY SCORE 49.2

Hello, my computer experience some BSOD while booting.

The problem happen only when I turn on the PC from a turned OFF state, I get a MEMORY_MANAGEMENT BSOD and when a restart everything is OK.

Recently, I upgrade my RAM from kingston 1 * 8 Gb C11 to 2 * 8 Gb C9 corsair vengeance, and since the problem appeared. My PC is a MSI GT70 2PE dominator pro.

What I did:
memtest : 7 passes with NO ERROR
switch to Windows 10, clean install
re-switch to Windows 7, clean install
try to use the minimum of drivers, use different version of graphic drivers, chipset, audio, lan, wireless...
I only install chrome, ccleaner, ESET smart security, VLC, photofiltre, mydefrag and driverCloud, but the problem is still there.

I need some help now, I don't know what to do, because I think the ram is OK, it's a software problem no ?

Thanks for help, kiss

Read other answers
RELEVANCY SCORE 49.2

Hi guys,

I've built many simple PC's for people, but upgrading my own in January was the worst thing I ever did! I've an Antec P180 case, to which I fitted a new Mobo, CPU, RAM and Gfx Card. The thing was so unstable. I ran out of time trying to fix it, so took it to a shop where they reinstalled the OS and all new RAM. It worked, joy.

Ever since it's always been a little flakey - occasional random reboots, BSOD's, failure to power up after sleep - but the last two weeks it has been terrrible (no hardware changes). After a repair install of Win7 made it no better, I went for a total clean install I had BSOD again within 30 mins - with nothing connected but mouse, keyboard, monitor + SSD and 2nd HDD.

It always seems to be when I am browsing online (even in safe mode!) - yet Photoshop, watching videos etc. is fine. The problem browsing is in IE, Firefox or Chrome; doesn't matter.

Today I ran all RAM modules through Memtest86 individually, all passed; then ran Prime95 for a few hours, then PassMark BurnInTest. I updated the SSD to firmware v2.0 from v1.1 this morning and enabled AHCI, but this hasn't helped any.

Can anyone see anything in the attached info that I may have missed?

I'm would like to return the mobo for replacement under warranty, but I can't demonstrate what is wrong!

A:BSOD even after reinstall, yet passes Prime95, Memtest etc.

First thing I see in your snips is mis-matched ram memory. Size & speed.

You have to wait for some other member to do your BSOD analysis.

How about a snip of each memory stick as seen in CPU-Z

Read other 5 answers
RELEVANCY SCORE 49.2

Hello everyone,
I've been trying to figure out what is going on with my fiances computer.
Yesterday when she tried to shut down it gave a BSOD with this info:
"
irql_not_less_or_equal

...

stop: 0x000000D1 (0xFFFFF8801D60400, 0x0000000000000002, 0x0000000000000006,

0xFFFFF88001D60400)

ntfs.sys - address FFFFF8801D60400 base at FFFFF88001c3D000, DateStamp 4a5bc14f
"

After searching around I've been seeing countless causes and fixes for people having this issue but I can't pinpoint what is causing this one.
I've tried cleaning the registry, updating hardware drivers for graphics, and running memtest.

The BSOD is now happening during use pretty often, I can't download any new drivers or do any scans because it just BSODs on me. When I try to run memtest, it will randomly just restart the comp and have to start the test over. This doesn't seem to have a consistent interval either, sometimes it restarts right away or after 2 hours of testing.
The computer won't even start without having 2 ram cards in, so I don't understand the instructions on other posts stating to test one card at a time.
Let me know if there is any more info I can provide. Thanks : )

A:BSOD randomly during use/on shutdown/ reboot during memtest. >:(

Hi and welcome to SF,








Quote:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
Use !analyze -v to get detailed debugging information.
BugCheck 1E, {ffffffffc0000005, fffff800034a8240, 0, ffffffffffffffff}
Probably caused by : memory_corruption ( nt!MiReplenishPageSlist+c0 )
Followup: MachineOwner
---------
1: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
KMODE_EXCEPTION_NOT_HANDLED (1e)
This is a very common bugcheck. Usually the exception address pinpoints
the driver/function that caused the problem. Always note this address
as well as the link date of the driver/image that contains this address.


Unable to load image \SystemRoot\System32\Drivers\aswSP.SYS, Win32 error 0n2
Unable to verify timestamp for aswSP.SYS

Faulting drivers: aswSnx.SYS, aswSP.SYS
Relates to: Avast AV
Please uninstall Avast as it is causing issues:

http://www.avast.com/uninstall-utility

As an alternative install Microsoft Security Essentials.
Recommended from a strict BSOD perspective, compatibility & stability
compared to other antiviruses/internet security software.

Microsoft Security Essentials - Microsoft Windows

Also please remove Zone Alarm. Also r... Read more

Read other 5 answers
RELEVANCY SCORE 49.2

New build - Win 7 Pro 64 bit. Originally had BSOD problems. Replaced mobo and chip. Still having problems. Relevant info4rmation attached.

A:BSOD - Memtest good, replaced mobo and CPU

Welcome to the forum. Please fill out your system specs in the User CP so we know what hardware you're using. Did you replace mobo and chip with same types? (RMA).

Read other 7 answers
RELEVANCY SCORE 48.8

Hi there. The last few days, I've been having some serious problems withmy desktop running Winxp sp3. I was playing the game F.E.A.R, and after about half hour in, it cut off with an error message about the instruction at (address) could not be read...

After that, whenever shutting down or starting up my PC I got various BSODs with the "STOP" error, and various error messages:

-PAGE_FAULT_IN_NON_PAGED_AREA
-CRQL_NOT_LESS_OR_EQUAL
-MEMORY_MANAGEMENT
-PFN_LIST_CORRUPT

at the end saying, "dumping physical memory to disk..."

I read it could be to do with recent hardware or software changes...the most recent hardware I added was a PCI serial port card, about 3 months ago (and have been using my PC almost every day since, no probs). I can't even remember what the last software I added was. Anyway, I removed the card, and still getting errors.

on two occasions the BSOD pointed to a file. First aswmon2.sys, which is associated with Avast antivirus - I did some searching on these errors, and found that antivirus software can be responsible, so I entered windows in safe mode, went to control panel>avast>change/remove>repair installation, and after that, it hasn't pointed to that file again, but the problem is still there.

I also read it could be a bad partition on the hard drive, so also in safe mode, I de-fragged the Hard drive (Although I do this pretty often and don't really transfer many large files around anyway, so it was already ... Read more

Read other answers
RELEVANCY SCORE 48.8

Hi guys, hope someone can share some advice on this.

Specs:
Mobo: Biostar T5 XE
RAM: Kingston Hyper Blu 8GB (KHX1333C9D3B1K2/8G) (PDF datasheet here)
CPU: Intel Core i3-550 Processor 3.2 GHz
PSU: Rosewill Xtreme Series RX850-S-B - ATX12V 2.2/ EPS12V 2.91 - 850 Watt - active PFC
Graphic Card: ASUS nVidia GeForce GTX570 1280MB DDR5
SSD (OS): OCZ Technology 30 GB Vertex Series
HDD (Data): Western Digital WD Caviar Black 1 TB
Case: AZZA Solano 1000R
OS: Windows 7 Home Premium 64-bit

Problem:
- The computer, after a few reinstalls and a few Win7 problems upon other problems (trying to get the latest nVidia drivers installed, for instance), BSODs seemingly randomly. It has so far done it at the following times:
* During regular Excel use.
* Moments after booting into Windows.
* While browsing YouTube videos.
* Moments before system shutdown.
The error shown on the BSOD is the following: ***STOP: 0x00000124, which I've looked into and it seems it's usually a hardware issue?

What I've Tried:
- Installing up to date Graphic Drivers: I could not for the life of me getting the latest "safe" nvidia drivers loaded. They kept failing over and over, and caused BSODs 4/5 times. I then tried installing the latest beta drivers in Safe Mode, which worked, so those are the ones I'm running. Didn't stop the problem.
- MemTest86 (the 4.0 version that runs from a bootdisk) has returned some errors. The first one was returned whilst testing both sticks at once, th... Read more

A:Memtest errors/BSOD on newly built system

Hi Dhakkel,

I am trying to get this straight, Memtest86 returns errors when you test both ram sticks on the motherboard. On the contrary, if you perform a individual ram test, Memtest86 returns NO errors. Hmmm.......

Try running the computer with only one stick and try updating the BIOS of the motherboard. Hope this helps you out.

Read other 2 answers
RELEVANCY SCORE 48.8

Hello, I've just recently purchased more memory for my computer and everything seemed to be working fine. Recently I've been getting 3B BSOD errors and just 5 minutes ago got one that was a 1E message. I've been trying to figure out why it was doing this, but when I look up the 3B message it says its a memory issue, I ran memtest all night and it ran 3 passes and received no errors so this cant be the issue, right?

I am running a x58 asus mobo, purchased last year. I just purchased 24 gb of corsair 1600 memory (this is the max my mobo can support).

I don't seem to have any other issues, the only thing I've been wondering about is if it might be a problem with my HDD but I don't see any other signs of hard drive damage or slow down.

my latest two (and only two) minidump files are attached.,

and here is the windows problem details from the 1e message:






Quote:
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.256.1
Locale ID: 1033

Additional information about the problem:
BCCode: 1e
BCP1: FFFFFFFFC0000005
BCP2: FFFFF80003274142
BCP3: 0000000000000000
BCP4: FFFFFFFFFFFFFFFF
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\093011-27140-01.dmp
C:\Users\Eric\AppData\Local\Temp\WER-89062-0.sysdata.xml

Read our privacy statement online:
Windows 7 Privacy Statement - Microsoft Windows

If the online privacy ... Read more

A:BSOD after installing new memory, but memtest comes back all passed?

  
Quote: Originally Posted by kynian


Hello, I've just recently purchased more memory for my computer and everything seemed to be working fine. Recently I've been getting 3B BSOD errors and just 5 minutes ago got one that was a 1E message. I've been trying to figure out why it was doing this, but when I look up the 3B message it says its a memory issue, I ran memtest all night and it ran 3 passes and received no errors so this cant be the issue, right?

I am running a x58 asus mobo, purchased last year. I just purchased 24 gb of corsair 1600 memory (this is the max my mobo can support).

I don't seem to have any other issues, the only thing I've been wondering about is if it might be a problem with my HDD but I don't see any other signs of hard drive damage or slow down.

my latest two (and only two) minidump files are attached.,

and here is the windows problem details from the 1e message:






Quote:
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.256.1
Locale ID: 1033

Additional information about the problem:
BCCode: 1e
BCP1: FFFFFFFFC0000005
BCP2: FFFFF80003274142
BCP3: 0000000000000000
BCP4: FFFFFFFFFFFFFFFF
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\093011-27140-01.dmp
C:\Users\Eric\AppData\Local\Temp\WER-89062-0.sysdata.xml

Read our privacy statement online:
... Read more

Read other 1 answers
RELEVANCY SCORE 48.8

As stated in the subject line, I have been having Memory_Management BSODs in Windows 7 64-bit. Strangely, Memtest and Driver Verifier have both come up clean after extensive runs. I ran three full passes of Memtest with a perfect bill of health, and ran Verifier for 4 hours straight, no BSOD. I hae run burn-in programs, CPU stress programs, and applications and games that stress the system to its limits; there is no consistent trigger for the Blue Screen. The code associated with the BSOD is 0x0000001a, which is very generic. My specs are as follows:

8 GB A-Data DDR2 800 Rams in 4 modules
2x nVidia GTX560 Ti graphics cards
Intel Core 2 Quad 2.83 GHz processor
Acer G7700 MoBo

A:Memory_Management BSOD, clean MemTest and Verifier Results

NOTE: I have severe eye problems. If I do not respond to your postings, please PM another staff member for assistance.

NOTE: Please provide the following information for a more detailed response: http://www.techsupportforum.com/foru...ta-452654.html

I suggest starting all troubleshooting with the following diagnostic tests (located at this link: Hardware Diagnostics ). They'll save you a lot of time and heartache if there is a hardware failure, and you'll have the disks on hand in case you need them in the future:

Quote:




H/W Diagnostics:
Please start by running these bootable hardware diagnostics:
Memory Diagnostics (read the details at the link)
Hard Drive Diagnostics (read the details at the link) - Test ALL of the hard drives.

Also, please run one of these free, independent online malware scans to ensure that your current protection hasn't been compromised: Free Online AntiMalware Resources (read the details at the link)
There are also free, bootable antivirus disks at this link: Free Online AntiMalware Resources - Bootable Disks




STOP 0x1A - MEMORY MANAGEMENT errors don't just involve RAM, they also involve virtual memory - both in RAM and in the pagefile (when it's swapped in/out of RAM). A careful diagnosis of the problem using the reports that I've requested above will usually point to an offending driver/program.

Read other 1 answers
RELEVANCY SCORE 48

EDIT: Here's the Memtest86.log file: Memtest86.log - Pastebin.com

I have been having a few issues with my custom build recently. I have noticed my computer randomly rebooting after being idle for a while, but it hardly ever does this during use (still hasn't). It also hangs a little more frequently. It never used to do this before, but I suspect memory faults?

I don't remember if this started happening before or after I enabled XMP in my BIOS.

What should I be looking at? I disabled XMP but the rebooting issue and memtest failures persist.

Thank you for any help you can offer. It's much appreciated!

Here is the memtest86 report (if I need to post something else, let me know):

Summary

Report Date 2015-03-25 10:17:58
Generated by MemTest86 V6.0.0 Free (64-bit)
Result FAIL
System Information

EFI Specifications 2.31
CPU Type Intel Core i7-4790 @ 3.60GHz
CPU Clock 3600 MHz [Turbo: 4000.1 MHz]
# Logical Processors 8
L1 Cache 64K (160451 MB/s)
L2 Cache 256K (60858 MB/s)
L3 Cache 8192K (45488 MB/s)
Memory 8239M (18062 MB/s)
DIMM Slot #0 4GB DDR3 XMP PC3-12800
Corsair / CML8GX3M2A1600C9
9-9-9-24 / 800 MHz / 1.500V
DIMM Slot #1 4GB DDR3 XMP PC3-12800
Corsair / CML8GX3M2A1600C9
9-9-9-24 / 800 MHz / 1.500V
Result summary

Test Start Time 2015-03-25 01:00:28
Elapsed Time 6:10:01
Memory Range Tested 0x0 - 22FE00000 (8958MB)
CPU Selection Mode Single: CPU # 0
# Tests Passed 44/48 (91%)
Lowest Error Address 0x21C4470AC (8644MB)
Highest Error Address 0x21C4470AC (8644MB)
Bits in Error... Read more

A:Random Reboot without BSOD, Memtest Fails Hammer Test

Upon any failures with memory you have either bad memory or a bad memory controller.

You can find out which one it might be by using the link below:
RAM - Test with Memtest86+

Also of help, below is something one of our members Arc posted a while ago.

BSOD at random times, driver problem 99,9% likely

Read other 9 answers
RELEVANCY SCORE 47.2

Hi, My computer is having random Blue Screens and screen distortions, I want to test my memory Rams but they are 4GB each. I need a software like MemTest but compatible with RAMs of 4GB and up, any help? Thanks
 

A:Solved: MemTest

Memtest86+ with the plus on it.
 

Read other 2 answers
RELEVANCY SCORE 47.2

I am about to commence a new round of memtests in this system; discovered that MS offers one for XP.
http://oca.microsoft.com/en/windiag.asp

Does anyone with experience re this have any opinions on it, say, versus memtest????

Thank U.
 

A:Solved: MS Memtest???

Read other 7 answers
RELEVANCY SCORE 46.8

My laptop refuses to boot and when i tried to test the hd it kept switching off, so i decided to run memtest-86 to check the memory.

My question is how long do i leave it running for?, its been going over 5 hours and passed all test so far.

Thanx
Paul
 

A:Solved: A question about memtest-86

That's more than enough. Your memory should be fine, look elsewhere for a problem. See if your HD maker has utilities to check your drive's fitness (most do) or try a 3rd party one.

http://www.google.com/search?q=hd+d...ient=firefox-a&rls=org.mozilla:en-US:official
 

Read other 2 answers
RELEVANCY SCORE 46.8

Hello,

I am trying to run memtest and am having trouble. I made a bootable CD by double clicking on the ISO and making sure to avoid the Roxio button for "Making the CD Bootable". I have gone into my BIOS and changed the boot order so that it does the CD first. However, memtest is not starting, one time the screen was just black with the green light on, and then the other time it just went right into windows in the same way that the computer regularly boots up. Can anyone help me get memtest going? Thanks.

A:[SOLVED] Memtest question

Hi microscopicxp and welcome to TSF !

Use ImgBurn : click the "write image file to disc" button and browse for the memtest .iso file. I've burned a dozen of memtest CD's with it.

Read other 2 answers
RELEVANCY SCORE 46.8

This works back to an active thread of mine re stop screen pool caller issue.

After running MS mem test briefly with good results a couple of days back, I just ran memtest with all 4 sticks in. I let it run for around 1 hr, 25 mins.....it seemed to only finish one actual whole test & with no errors; all the items on upper screen re percentages and my CPU I do not understand.

I only know this is the most turtle/sloth/snail like thing I have ever seen.

Are the above "results" after the interval stated, definitive? Do I need to run it longer or configure some part of it?

Thank U!
 

A:Solved: New Memtest Question

Read other 10 answers
RELEVANCY SCORE 46.8

Hi everyone im having some problems with my computer and think it may just be some settings needing done.

I originally built the computer about 2 months ago and all worked well untill it started freezeing and when trying to start up would get no further than the xp loading screen and reboot. So i thought it was faulty ram as i ran memtest on the system and reported over 2000 errors. So after getting my new ram it was still throwing out errors, i tried changing the slots it was in with no luck but was reporting different amount of errors each time i ran it.

I phoned up gigabyte thinking it was a faulty motherboard and they advised me that the motherboard is designed to run at 1.8v for the ram and crucial ballistix ram to run at 2.2v and suggested upping the voltage. I tried that and there was still errors being thrown out.

I then looked at the timming and realised it was not showing as 5-5-5-15 as crucial specify so manually went in and changed this. On a couple of occasions the bios screen has frozen on me also.

When i try and boot widows it is constantly rebooting but if i try and format it it boots from disk but as soon as it goes to start windows from disk throws out the blue screen of death as i believe its known.

I have tried everything i can possibly think of and its still not working. Im worried i send the motherboard back and it turns out not to be faulty. However one observation i made is even though it standard runs at 1.8v for the ram when i go into the heal... Read more

A:Solved: Ram Errors in MemTest

Read other 16 answers
RELEVANCY SCORE 46.8

Hello everyone,

2 weeks ago I assembled a new system for myself. everything was running perfectly untill 2 days ago.
All of a sudden I started to get a lot of BSOD's.
They all had either one of the following messages.

-Page fault in non-paged area.
or
-Memory management.

The BSOD's occur a couple of times a day, but not at a specific moment. some times it's during gaming, other times it's whilst surfing the internet. The pc reboots automatically and then everything seems normal again.
In addition the programs Im working with seem to stop responding on an average bassis. Allthough a simple restart is enough to solve the problem, it is getting quite annoying because it happens a lot.

Anxious to find out what the problem was I started running a memtest. It is still running (I'm writing this on my laptop) but it already found a shocking 650 000 errors! So something is definitely wrong.

The system is 2 weeks old and I didn't do any overclocking or default changes at all.
Any ideas on what my next step should be?

Oh and here is the Spec of my system:

processor: Intel Core i7-3770K, s1155 3.50GHz, Quad-Core, 8MB
RAM: Corsair Vengeance DDR3, 1600MHz, 2x4GB, 1.5V
Power supply: Cooler Master M2 720Watt.
Motherboard: ASUS P8H77-V
Videocard: EVGA Geforce GTX570 HD DS 1,28GB PCI-012-P31577-KR
Hard disk: WD HI 3.5" 1TB SATA

I really hope you guys can help me, any ideas are welcome!
 

A:Solved: Memtest errors.

Read other 16 answers
RELEVANCY SCORE 46.8

I ran MEMTEST on my wife's PC because of a BSOD ( PC#1). There were NO errors.

When she came down she said "what are you doing to my computer ? " I tries to explain that I was fixing it. But she just wanted back on her PC now !

So I hit excapt and ejected the CD. Now the computer won't boot intp Windows.

She is so pissed at me now !

PLEASE HELP !
 

A:Solved: MEMTEST question

I am unable to get into safe mode. I press F8 > Safe Mode, then when I go to select WIN XP Home , nothing. It is like the keyboard or PC locks up.

Any ideas ?
 

Read other 2 answers
RELEVANCY SCORE 46.4

Hi,

My Computer (Panasonic CF-S9) shuts down whenever I use Excel files that are too large, play intensive flash applications, and the latest, when I run memtest to see what the problem might be.

Can anyone help or suggest how I might investigate this further.

As an aside, soluto.com - is this at all useful to helping to solve this problem?

Peter
 

A:Solved: Computer shuts down during memtest

Read other 11 answers
RELEVANCY SCORE 46.4

Okay not sure if Im posting this in right place..

Pretty much has having problems with guild wars 2 all of a sudden and was recommended to test ram so I downloaded the newest version of memtest got it put onto a usb stick and went to run test. It starts all fine but never makes it past the first pass, the screen just goes no connection but the pc keeps running.

Not sure whats going on.

Any help would be awesome =^.^=
 

A:Solved: Black screen in memtest

Read other 13 answers
RELEVANCY SCORE 46.4

My computer has started crashing, giving 0cx0000005, and other, error codes.

One of the measures I have done is running a Memtest that showed 26 errors on test 5, see the attached .gif .

How shall I interpret this, and how to proceed?

A:[SOLVED] Memtest analysis help needed

Hi Alti, welcome to TSF...

any errors on memtest86 is a bad sign. If you're running your ram at stock speeds and voltages, then you have a high chance of having faulty modules. Perhaps try loading default settings in BIOS and scanning individual sticks for errors.

Read other 1 answers
RELEVANCY SCORE 46

My laptop advent won't boot.
Start up repair wont work, even a system repair cd wont fully load.
Only thing i can get to is launch repair your computer, and the only thing that works there is command prompt.

Tried fixboot & fixmbr... They worked but rebuildbcd never finishes.

Any help please
 

A:Solved: Boot/memtest.exe missing or corrupt

Read other 16 answers