Over 1 million tech questions and answers.

Drivers for PCI serial port and PCI controller

Q: Drivers for PCI serial port and PCI controller

Hello, I have a desktop hp compaq 8000 Elite SFF pc and need drivers for the following:PCI Serial PortPCI Simple Communications ControllerPlease guide me,Thanks

Read other answers
RELEVANCY SCORE 200
Preferred Solution: Drivers for PCI serial port and PCI controller

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

RELEVANCY SCORE 91.6

I am preparing deployment image for ThinkCentre M57 (6074-A4G). I have manually downloaded and installed all the drivers (excluding those related to AMT etc.) to the SYSPREPped machine but XP "Device Manager" still reports that "PCI Serial Port", "PCI Simple Communications Controller" & and an "Unknown device" (Intel ICH9DO LPC Interface Controller) are missing drivers. Does anyone have any information about this?Tried to use also Lenovo System Update but it only updated Graphics card and Intel Chipset etc. and left even more missing drivers.appreciate the help.- lakend





ThinkCentre M57 (6074-A4G) - ThinkPad T61p (8889-3DG)

A:M57 - XP drivers for PCI Serial Port & PCI Simple Communications Controller are missing

Although the installer run it does not fix the missing devicesright click on the unknown device , update driver , point it to the folders that were extractedC:\swtools   

Read other 9 answers
RELEVANCY SCORE 75.2

I'm looking for two drivers, and have run into a bit os a wall on the Lenovo driver website. - PCI Simple Communicator Port- PCI Serial Port Computer: Thinkcenter M58 8910 ARU.   Windows 7, 64 bit. I dropped a new hard drive and a PCI card into this machine, and everything looks good except that the PCI card is not recognized.  I see similar posts here, but none with solutions that work for my exact situation.  I'm not a tech guru, just a semi-educated user.  8^)  Any help is greatly appreciated! Thanks, 

Read other answers
RELEVANCY SCORE 75.2

I'm looking for two drivers, and have run into a bit os a wall on the Lenovo driver website. - PCI Simple Communicator Port- PCI Serial Port Computer: Thinkcenter M58 8910 ARU.   Windows 7, 64 bit. I dropped a new hard drive and a PCI card into this machine, and everything looks good except that the PCI card is not recognized.  I see similar posts here, but none with solutions that work for my exact situation.  I'm not a tech guru, just a semi-educated user.  8^)  Any help is greatly appreciated! Thanks,Bob 













Solved!

Go to Solution.

A:PCI Simple Communicator Port and PCI Serial Port drivers for M58

I have the same problem with M58P and Windows 8.1_x64.- http://support.lenovo.com/br/pt/products/desktops-and-all-in-ones/thinkcentre-m-series-desktops/thin...On page no information about the PCI Serial Port driver.Any suggestion?

Read other 4 answers
RELEVANCY SCORE 74

I reloaded Windows 7 pro 64 bit and now I cannot find the drivers for the PCI Serial Port and PCI Simple Communications Controller.   Can some one help me?

A:pci serial port and PCI Simple communication controller driv...

Hi: I believe that you need this driver...It should install both devices.  Seems to be missing from all HP support pages for various models. https://downloadcenter.intel.com/download/22093/Intel-ME-8-Intel-Management-Engine-Driver    

Read other 1 answers
RELEVANCY SCORE 74

Install Windows 7 64-bit professional and any of the communication ports (COM) are not working.  Which driver should I install to use the communication ports? Thanks

Read other answers
RELEVANCY SCORE 73.2

I don't see ports menu in device manager.Also, the USB serial controller entry is missing from the device manager menu under USB entries.I need to install a 3D printer driver that connects via USB. However, its driver does not get loaded. The printer devices shows itself under other devices without driver and does not accept many drivers that I have tried.Thanks

Read other answers
RELEVANCY SCORE 72.8

Hey Gurus,

I trust you have been keeping well.

I can't get my usb-serial to work on my XP - 32bit.

They instance ID is USB\VID_067B&PID_2303\5&2988E0FF&0&2 , any ideas where I can get this driver

Thanks in advance

Ngara
 

A:USB - Serial Controller Drivers

have a read here
http://forums.techguy.org/windows-nt-2000-xp/547010-usb-serial-controller.html
same ID as you have and the driver fixed that problem
 

Read other 1 answers
RELEVANCY SCORE 72.8

My PC's OS: Windows XP (Professional, Version 2002, Service Pack 2)
Computer Info : Intel (R)
Pentium(R) 4
CPU: 2.66 GHz
Ram: 960 MB

I use a Nokia phone, Model: 2630, Type: RM-298
Yesterday I bought a data cable home to connect my phone to my PC and copy my messages via Nokia PC Suite (Version-3.4.40) to my PC.
Unfortunately, when I connected the data cable(fits perfectly to my phone) a window showed up saying "New found hardware installation" and the name written as the new found hardware was "USB serial controller"
I had a CD that came with my data cable,but my DVD-ROM doesn't work(and I won't be able to fix it myself or by other means,at least for a while) so I couldn't install it, so I inserted the CD to my sister's laptop and asked her to copy it's contents for me so that I can install them into my computer with a pen drive. But the files written in the setup CD were read only,and could not be copied. I asked my sister to install the CD to her PC but she refused because the anti-virus was detecting a virus there(Avira free anti-virus)
So, now I have to go to a friend's house to install the CD and get my messages copied to a computer, But I don't want my messages to be seen by others and if I transfer( or copy,whichever) my messages there I don't know if I can copy them to my PC and the virus might cause problems to my friends computer.
I really need the drivers from the internet,and I really need a driver ... Read more

Read other answers
RELEVANCY SCORE 72

Hello!I have hp notebook 15-ay089tu  Laptop, i installed windows 7 ultimate 64bit, but i can't finding Universal Serial Bus (USB) controller Driver. Please help me as soon as posible. Regards lovekesh

Read other answers
RELEVANCY SCORE 72

Hey all, I've been using this computer for a long time and always when i start up windows (vista) it says that windows needs drivers for my serial ata controller located on PCI bus 3 (which i assume is one of my graphics cards). Well I search for it automatically, nothing.. Search the driverstore on system32, nothing. Put in the ATI catalyst disc, nothing.. I usually do the whole "Ask again later" option, but i just wanna solve this thing and get it over with, anyone? Thanks
 

A:Serial ATA controller drivers not found

The Serial ATA controller is on the motherboard, its for connecting hard drives.

You need to install at least the chipset drivers:
-> Chipset: INF Update Utility for Intel® Desktop Boards.

And maybe the RAID Driver:
-> RAID: Intel® Matrix Storage Manager Driver

Both are located here: http://downloadcenter.intel.com/fil...ndows+Vista*+32&lang=eng&strOSs=164&submit=Go!
 

Read other 2 answers
RELEVANCY SCORE 71.6

Where can I find the drivers for the PCI Serial Port on this machine ?  I loaded all the drivers from HP for this macine after an upgrade to windows 7 enterprise and this driver is not available.  Thank you

A:PCI Serial Port drivers

Hi: You need this driver...manually install it if the auto install method doesn't work. This package provides the Intel Management Engine Components Driver for supported desktop models that are running a supported operating system.  ftp://ftp.hp.com/pub/softpaq/sp75001-75500/sp75384.exe

Read other 1 answers
RELEVANCY SCORE 71.2

For the love of god I cannot find a USB2.0 DRIVER! My dad is working on his PC which needs USB drivers or else the USB ports won't work. Hes running XP reformatted and I am running seven. Im looking for a 7 USB driver and an XP USB2.0 Driver. And I cannot find either one!

And Service pack 2 & 3 for XP did not include them. Service pack 1 no longer exists. They fused it with 2.

A:Universal Serial Bus Controller drivers XP/Seven/Vista

You need to go to the motherboard manufactures site and down load the relevant chipset drivers

Read other 2 answers
RELEVANCY SCORE 71.2

I am looking for the following drivers for Windows 7 Pro 64bit for HP Pavilion Laptop G6-2200. Ethernet Controller:PCI\VEN_10EC&DEV_8136&SUBSYS_184A103C&REV_05 Universal Serial Bus (USB) Controller:PCI\VEN_1022&DEV_7812&SUBSYS_184A103C&REV_03 Display Adapter Standard VGA Graphics Adpater: (cannot start device error)PCI\VEN_1002&DEV_6840&SUBSYS_184A103C&REV_00Thank you,

A:Ethernet and Univ Serial Bus (USB) Controller Drivers for Hp...

@Dwaynedjr Please try 1.   http://ftp.hp.com/pub/softpaq/sp61501-62000/sp61723.exe2.   http://ftp.hp.com/pub/softpaq/sp55001-55500/sp55102.exe3.   http://ftp.hp.com/pub/softpaq/sp61501-62000/sp61715.exe For 3, I think your machine uses AMD processor, please post back the model of your machine if still having problem. I need to know what is your HP Pavilion G6-2200aa  (I need to know what is aa). Regards.

Read other 2 answers
RELEVANCY SCORE 71.2

Just reinstalled Win& from Recovery disks and is performing well, except for all US ports not working. There is an exclamation mark under ALL Universal Serial Bus controllers.Thur internet, I downloaded a Lenovo website link to Intel file to install the drivers, but it comes back to say the computer does not meet the minimum requirement.I'm lost without use of a USB mouse and other uses of USB ports.Please help











Solved!
View Solution.

A:Need Universal Serial Bus controller drivers for G42-415DX

Hi: See if installing the amd chipset driver from the link below works for you. You want the 1st file listed on the webpage.  Install and restart the PC. http://support.amd.com/en-us/download/desktop/legacy?product=legacy4&os=Windows%207%20-%2064

Read other 4 answers
RELEVANCY SCORE 70.4

Hello, I know that its recommened that I use windows 10, but I dont want to use windows 10, I honestly hate it. I want to keep using windows 7. I went back to windows 7, doing a clean install, (deleting all partitions) and now my 15-f272wm notebook cannot get online. I know I need to download the network drivers, etc. I was missing the PCI, the ethernet controller, and a few others, about 6 things. I came across some help online, downloaded and burned some of the drivers onto a cd, and now my f272wm notebook is still not connecting to the internet, (the wifi adapter is not working or being found at all, not sure what I need to download for that to work again) and also even when I hardwire a ethernet cord into my modem to the computer, its showing as there is no connection. In device manager, under network adapters, im using Realtek PCIe FE Family Controller. The only things in device manager that are coming up as problems are under 'other devices' which is the 'Network Controller' and 'Universal Serial Bus (USB) Controller)... Do I need to find these last two drivers in order for my notebook to be able to connect to the internet again? When in device manager, selecting update drivers does not work. It keeps saying it cant find anything. I tried to be as descriptive as possible. Thank you for the help, I know I dont NEED windows 10 in order to be able to access the internet on this notebook. Plenty of people run windows 7 on this. Also if you guys need to know what my net... Read more

A:network controller/universal serial bus drivers missing

Hi, Firstly please download and install the following driver for LAN (wired) first          http://ftp.hp.com/pub/softpaq/sp71501-72000/sp71906.exe After going online, you can run updates and ith will find more drivers for you. Any missing after that, please post back. We need to konw which one, not general missing few drivers. Regards,

Read other 1 answers
RELEVANCY SCORE 70

I recently upgraded a DELL Optiplex 790 to windows 10 and promptly lost the PCI Serial Port drivers. Now my PCIe slots are no longer functional. 
I understand that this computer is no longer supported by dell, however, I am hoping that someone did the upgrade successfully and can help direct me as to what I can do to fix the issue. 

thanks 

WJC

A:Optiplex 790 PCI Serial Port Drivers Missing

Windows 10 does not install ANY driver that isnt 64 bit and WHQL Certified.
You need Microsoft WHQL certified drivers for windows 10 for your PCI serial card.
The PCI-E serial card is not from dell and not supported here.

You have to disable the driver signature enforcement in Windows 10
which makes your system vulnerable to malware.
Press the Win + C and click on PC settings.
Switch over to the “Update & recovery” section.

Then click on the Recovery option on the left hand side.

Once selected, you will see an advanced startup section appear on the right hand side. You will need to click on the “Restart now” button.

Once your Computer has rebooted you will need to choose the Troubleshoot option.

Then head into Advanced options.
Then Startup Settings.

Since we are modifying boot time configuration settings, you will need to restart your computer one last time.

Here you will be given a list of startup settings that you can change. The one we are looking for is “Disable driver signature enforcement”. To choose the setting, you will need to press the F7 key.
 

 
 

Read other 1 answers
RELEVANCY SCORE 70

i've looked at the support site and i can't find 2 drivers for the x230 that i have rebuilt. one is for the biometric coprocessor and the other is the pci simple communications controller. a search of the site for either of those doesn't come up with anything. i have downloaded and installed lenovo update and all the webpage does is spin and nothing ever comes up. are there any direct links for the drivers available?

Read other answers
RELEVANCY SCORE 69.6

Can't find the drivers for the above mentioned devices.

A:OptiPlex 790 Universal Serial Bus Controller,Unknown device drivers for Win 7 pro 64-bit

Intel Chipset driver
Intel Management Engine
Intel AMT
NEC USB 3.0 Driver
www.dell.com/.../advanced

Read other 1 answers
RELEVANCY SCORE 69.2

Have these above drivers missing -  managed to solve PCI Simple Communication Device missing driver by downloading  some drivers from HP Support and running these from 'command prompt (Admin)' with them running in Win 7 compatability Mode.  What driver(s) do I need to run to overcome this or where else should I look to resolve. 

A:Win 10 PCI Serial Port & PCI Unknown Device Drivers misiing

Hi: For the PCI Serial Port you need this driver... This package contains the Intel Local Management Service (LMS) and Serial-over-LAN (SOL) support for Intel Active Management Technology (AMT) for the supported desktop models and operating systems. This software is part of the Intel Digital Office Initiative. ftp://ftp.hp.com/pub/softpaq/sp46001-46500/sp46134.exe Please post the hardware ID for the PCI Unknown device you are missing the driver for. To find the hardware ID, go to the device manager and click on the unknown device needing the driver. Then click on the Details tab at the top of the device window. Now you will see a Property drop down list, and it will be set to Device Description. Drop down on that list and select the 3rd item (Hardware ID's). Post the top string of characters that you see in the window.

Read other 1 answers
RELEVANCY SCORE 69.2

PCI\VEN_8086&DEV_2997&SUBSYS_2801103C&REV_02PCI\VEN_8086&DEV_2997&SUBSYS_2801103CPCI\VEN_8086&DEV_2997&CC_070002PCI\VEN_8086&DEV_2997&CC_0700 and PCI\VEN_8086&DEV_2994&SUBSYS_2801103C&REV_02PCI\VEN_8086&DEV_2994&SUBSYS_2801103CPCI\VEN_8086&DEV_2994&CC_078000PCI\VEN_8086&DEV_2994&CC_0780 Experts in the house should please come to my aid. I just upgraded my Hp DC7700. I was able to get all the drivers except for the PCI SERIAL PORT and PCI SIMPLE COMMUNICATIONS CONTROLLER that are missing. above are the hardware ids of the two missing drivers I have checked the HP drivers download page but could not find anything. The only drivers I saw were for windows Xp and vista which I tried downloading and installing but got error message that it does not support the operating system. I have done windows update, yet the drivers are still missing. Kindly help me because as it is now, I cannot instal any printer on my system. I have HP printers (Laserjet 1200, 1320 and CP1515) that I needed to instal on the system. Thank you.

A:PCI Serial Port and Simple Communication Controllers drivers...

@olasdot? Try this one. http://h20564.www2.hp.com/hpsc/swd/public/detail?swItemId=vc_96436_1 REO

Read other 2 answers
RELEVANCY SCORE 68.4

My new card is not working. The CD that came with it doesn't even recognize my new PCI card. It's a DVI, and I have a DVI dual to VGA piece where it can turn the DVI output into VGA. I thought perhaps it had arrived DOA from e-bay, until....I went into Device Manager. Problem is, in my Windows 7 Device Manager, under OTHER DEVICES? My PCI Serial Port has a yellow question mark next to it. I learned from Windows XP that this means there's a problem with my component. Hence my new card won't work until my PCI Serial Port is straightened out. I've tried to click on it and update it, but when I do that, Windows 7 says UPDATING...and then it says DEVICE did not update successfully. So it seems this is something I can't do through Windows update, or something Windows update won't do itself. Anyone else had this issue? Seems to be driver related.

My pc is a Gateway e4610 small form desktop...

Gateway E-4610S SB Desktop
Intel Core 2 Duo 1.8GHz, 2GB DDR2, 70GB HDD, CD-ROM/DVD-Rom.

A:Installed new video card, but PCI Serial Port is marked/ drivers?

Hi there ... Looks like you need a chipset Driver ... Go to Gateway website to download the Driver

Gateway Support - Downloads & Support Documents - Desktop / E Series / E-4610S

Read other 9 answers
RELEVANCY SCORE 59.2

Need some advice a quick as possible.

Windows XP Pro
ofc had a built in serial port go bad, it was hooked to a charicter generator (don't no how to spell charicter) for a tv channel.
Installed a Controller Card with two serail ports PCI Multi I/O Controller Card, it didn't show up in the device manager was having problems getting the driver to work. says to load driver first then put in the pci card. Anyway it wouldn't work. The port that was built in (that went bad was on com 1) When the new card didn't work I used a usb with a serial adaptor and it went in fine and showed up in the divice manager and it said it was working and it started out on com 3, I no each time you plug the adaptor into a different usb port it goes to a different com port. That isn't a problem cause it would stay in the same port. Anyway device manager said it was working we changed the charicter generator to com 3 but it wouldn't work. We no the cables are good. I then got a PCI Card with one serial port instead of two and installed it and it show right up in the device manager and said it was working and I for get what comport it was on but changed it to com 1. that port didn't work either. Finally brought in another windows xp computer and hooked everhthing to it and it works. The xp computer I brought in had no serial port so used the same usb to serial adaptor that we had used and it work the first time. Show up in the device manager just like on the first comp... Read more

Read other answers
RELEVANCY SCORE 57.2

I have an amateur radio program installed on my desktop Dell PC runnning Windows 7. The program is correctly installed but when I try to communicate using the Internet I hear no sound from my speakers. I am connected to the other station but still no sound.
I get a message saying "cannot open serial port COM1. I would like to know how to convert a USB port to a Serial port. Please advise.
Thank you

Read other answers
RELEVANCY SCORE 57.2

I have a Pavilion 23-h150 All-In-One. It originally came with Windows 8. For lots of reasons, it now has Windows 7 Ultimate 64-bit. I have managed to find all the drivers that I need except for these two pieces of hardware: 1.) SM Bus Controller - Hardware Ids:PCI\VEN_1022&DEV_780B&SUBSYS_2B09103C&REV_16PCI\VEN_1022&DEV_780B&SUBSYS_2B09103CPCI\VEN_1022&DEV_780B&CC_0C0500PCI\VEN_1022&DEV_780B&CC_0C05 2.) Universal Serial Bus (USB) Controller - Hardware Ids:PCI\VEN_1022&DEV_7814&SUBSYS_2B09103C&REV_09PCI\VEN_1022&DEV_7814&SUBSYS_2B09103CPCI\VEN_1022&DEV_7814&CC_0C0330PCI\VEN_1022&DEV_7814&CC_0C03 I don't know what the first one is but I've installed chipset drivers and it hasn't fixed the problem. The second one is definitely for the USB 3.0 ports (I know because they don't work but the 2.0 ones do) but I can't find the drivers I need for Windows 7 and the Windows 8 ones are not working. Any help here would be greatly appreciated.

A:SM Bus Controller and Universal Serial Bus (USB) Controller ...

Hi: Install the amd chipset drivers and restart the PC. You want the first driver listed on the webpage... http://support.amd.com/en-us/download/chipset?os=Windows%207%20-%2064

Read other 2 answers
RELEVANCY SCORE 54

Hello guys,
First post here, but this dam driver has been annoying me too long, time to call in the experts ^^

I'm on Windows XP Pro 64bit, SP2.

My specs i filled out when registering, however this is the information from the driver needed:

USB\VID_067B&PID_2303\5&212E3107&0&2

Thanks, hope this is enough, if you need anything else from me, giveme a shout.

Thanks
Shaun
 

A:USB-Serial Controller

Read other 6 answers
RELEVANCY SCORE 54

Ok, got the problem with the laptop solved in the networking area, hoping you can help me with another problem.... this past weekend we added a Linksys ethernet card to this pc, as well as a cd-rw drive.

Problem is I am getting a message that the system is detecting a PCI Serial controller (new) every time it boots...when I try to find a driver for whatever it is (it doesn't tell me), it says there isn't one available....I rechecked every single thing in my device manager, all are working fine, drivers are installed.....this won't go away...any ideas...

also when bf installed the new cd-rw, the system or he, somehow changed my original cd-rom drive from e to g, and the new one is now f....what do i do with the drive e? just ignore it??? very weird

Thanks for any help you can give me
 

A:PCI Serial Controller

Read other 8 answers
RELEVANCY SCORE 54

When I turn my computer on.. the "add new hardware" wizard says that it detects a PCI Serial Controller and needs a driver. But being a computer novice Im lost as to where I can find this driver. Pleas Help !!!
 

A:PCI Serial Controller

That is your modem. If you have the driver disk for your modem, put it in.

If not, let us know the brand / model and we can probably track it down for you.

------------------
Get free stuff and help out a poor computer tech:
LarryCore begs for money
 

Read other 3 answers
RELEVANCY SCORE 54

hi guys i recently purchased a Nikkai Usb to Serial convertor (RS232). I cannot find the cd anywhere with the drivers on I've searched everywhere online and just cant find anything for it. Im running Windows XP home and the USB id is;

USB\VID_067B&PID_2303\5&2FD9258D&0&2

Can anybody help at all, i dont mean to sound pushy but i kind of need this today.

regards chris
 

A:Please Help with usb serial controller

It uses a driver made by Prolific Technology. A driver for XP is at the top of this page: http://www.prolific.com.tw/eng/downloads.asp?ID=31
 

Read other 2 answers
RELEVANCY SCORE 54

Hello All,
I am tring to install a USB serial cable to enable me to use com port devicse since my laptop doesnt have Com port device.
I have the serial cable and any time i try to install it it asks for a soft ware to be installed, but i dont have the software.
Can any body help me out to solve this problem plz?
This is the spcification what i get from device managar+USB controll+Details

USB\VID_067B&PID_2303\5&5D02DB7&0&1

I will be looking for a quick replay
Regards
 

A:USB- serial controller

Read other 8 answers
RELEVANCY SCORE 53.2

i need the usb controller with the below hadware id  PCI\VEN_8086&DEV_1E31&SUBSYS_2186103C&REV_04PCI\VEN_8086&DEV_1E31&SUBSYS_2186103CPCI\VEN_8086&DEV_1E31&CC_0C0330PCI\VEN_8086&DEV_1E31&CC_0C03

Read other answers
RELEVANCY SCORE 53.2

Hiya.....just done a clean install retail Windows 7 Home Premium OS and have not been able to locate driver for the above. I used the disc which came with the computer for drivers etc and managed to install everything that was showing driver needed except for this. I have not used any USB devices as yet so is totally clean.

Any ideas anybody?

Thanks

A:Universal Serial Bus USB Controller

What's the model number of your motherboard or laptop?

Read other 4 answers
RELEVANCY SCORE 53.2

I am trying to present a power point presentation using an older Sanyo Projector. The problem is that the data cable I need to connect for computer to Projector communication only has a COM port for connection to my laptop. My laptop has no COM ports. I purchased a USB/COM Port Adapter and hooked it up to my laptop. I was prompted for a driver and now after a full four hours of searching high and low..I am unable to find any drivers.

I am using windows XP Pro and the controller is a Sanyo remote controller for a Sanyo XtraX Multimedia Projector. I have tried untold numbers of purported drivers with no success...I am lucky that I have not, as of yet, blown up my computer.

I would greatly appreciate any available help in tracking down a usable driver for this USB/COM port Adapter - Controller device.

thanks in advance...
 

A:USB-Serial Controller woes

If the remote expects to see a "real" RS232 com port, then many of the USB adaptors will simply not work.

The USB to RS232 adaptors create a "virtual" com port not a "hardware" one.

Given that, it's hard to point you to a driver when we do not know the make or model of USB to RS232 adaptor, there are hundreds of them.
 

Read other 2 answers
RELEVANCY SCORE 53.2

can somebody please help me? its saying that i dont have any driver software for the Universal Serial Bus (USB) controller and ive already tried searching for a driver and cant find one.  i read another forum that said to change the device description to hardware IDs. can you please tell me what driver i need? PCI\VEN_8086&DEV_0F35&SUBSYS_2213103C&REV_0EPCI\VEN_8086&DEV_0F35&SUBSYS_2213103CPCI\VEN_8086&DEV_0F35&CC_0C0330PCI\VEN_8086&DEV_0F35&CC_0C03

A:Universal Serial Bus (USB) controller?

Is Windows 8.1 the original operating system? You can install the driver from the recovery flashdrive if it is. That device is the usb 3.0 controller.Do the usb 2.0 ports work? You can get the usb driver direct from Intel.https://downloadcenter.intel.com/

Read other 1 answers
RELEVANCY SCORE 53.2

I Have Problem With This But I Not Connect Any Device Except My Mouse, Headset & Xbox Controller

What is This ?

A:Universal Serial Bus Controller

You have a device that needs a specific driver if it is Xbox you need to update it or manually get the driver from M$

Read other 2 answers
RELEVANCY SCORE 53.2

...not installed.
Any idea were I can find one?

A:Serial ATA Controller Driver...

EVGA Z77 FTW
Download the drivers from here:
EVGA | Products | EVGA Z77 FTW | 151-IB-E699-KR

Read other 4 answers
RELEVANCY SCORE 53.2

I have a new USB it's hardware id is USB\Vid_0678&PID_2303\5&2D0EB6E9&0&1.. pls help me
 

Read other answers
RELEVANCY SCORE 53.2

Hi,
Ok so i have a Philips freeline LS2100 yesterday i started my pc up as i usually do when it got to the windows screen (it just says windows and has a blue bar running back and forth) the blue bar just stopped. so i turned my pc off and on again and it did it again. (you'll have to excuse my rambling just wanna make sure i get all the details in lol) so i got into safe mode and i had a hardware update wizard screen appear. it said

This wizard will help you install software for:

PCI Multiport Serial Controller

So i followed the instructions... it searches.... it finds nothing

CANNOT INSTALL THIS HARDWARE

The hardware was not installed because the wizard cannot find the necessary software.

So i did a system recovery.... it started up into windows great until i had turned it off and later that day tried to turn it on again when the whole shinanigans started all over again..

Any help would be muchly appreciated coz i dont wanna have to drag my pc down to pc world.

Thanx
 

Read other answers
RELEVANCY SCORE 53.2

I use Windows 7 Home Premium on my Gateway NV57H13u with Intel Core , USB 3.0 Super Speed, and when I'm under Devices and Printers it shows an explanation point under my computer name. I went to troubleshooting and it came up that there was no driver for
the USB controller.. It searched for one and cannot find one. I've tried looking through windows update and on the web and no luck... Please help

A:Universal Serial Bus Controller

The primary source of drivers for your laptop is Gateway Support.
If you go to the Gateway Support website, you will find a download titled
USB Driver (3.0).
You download that driver and install it on your laptop to enable the USB 3.0 ports.

Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

Read other 3 answers
RELEVANCY SCORE 53.2

Hello All,
I am tring to install a USB serial cable to enable me to use com port devicse since my laptop doesnt have Com port device.
I have the serial cable and any time i try to install it it asks for a soft ware to be installed, but i dont have the software & unfortunately also no vendor information.
Can any body help me out to solve this problem plz?
This is the spcification what i get from device managar+USB controll+Details

USB\VID_067B&PID_2303\6&1E3C5ED9&0&2

I would certainly appreciate a quick reply
Regards
 

A:USB Serial Controller (Taiwan)

I installed the driver for 067b/ prod 2303, version 2.0.16.166 from Profilic website.
Unfortunately it still does not work.
USBDeview tells me it is not connected.
Windows Device Manager says "This device cannot start (code 10).
 

Read other 1 answers
RELEVANCY SCORE 53.2

Help me...im using w7 (64bit).. i try instal many time bus cant find the right 1...Thanks in advance??

Read other answers
RELEVANCY SCORE 53.2

I have a Dell Dimension 4600 and i just reformatted and redid everything on it to start from scratch and i am just reinstalling all of the drivers.
In the Device manager i have a Question mark next to my Universal Serial Bus (USB) Controller
and i don't know whats wrong with it, and want to fix it.
And also i have a Western Digital External Hard drive that i plug in that wont show up in my computer and i have many important things on it and i would like to access it, and when i plug it in it says that it can preform faster if i plug it into a High Speed USB port and such.
So please help if you know how to do any of this
 

A:Universal Serial Bus (USB) Controller

Read other 6 answers
RELEVANCY SCORE 53.2

I am having trouble installing my software for my epson printer.
I get a error message that the port can not be found, but I had this checked out and was told the port is fine. The printer book said to check the universal serial bus controller.
How do I do this?
 

A:universal serial bus controller

For general USB related links see here :

http://www.intel.com/technology/usb/

Depending which Win OS you're using perhaps try this utility :

http://www.usbmonitor.com/universal-serial-bus-controller-port-check.html
 

Read other 1 answers
RELEVANCY SCORE 53.2

Hello, I have an issue with my small form factor HP dc7800 desktop PCI serial controller card when  I look in the device manager it is showing with the little exclamation mark and yello question mark. Also an error when I open the properties it says it missing the driver. I did try reinstalling it but cannot find the appropriate drivers. There is also another card that shows an error. I have added the device id's below. Please help!  PCI\VEN_135C&DEV_01C0&SUBSYS_01C0135C&REV_01  PCI\VEN_8086&DEV_29B7&SUBSYS_2818103C&REV_02 ThanksHappy!

A:PCI multiport serial controller

 Hi, Try http://downloadmirror.intel.com/18531/eng/MEI_AMT_ALLOS_6.1.0.1042_PV.exe  Regards

Read other 3 answers
RELEVANCY SCORE 53.2

I have a Toshiba Satellite A215-S5818 with a Windows Vista and when I try to turn on the computer, I get an ERROR RESOURCE CONFLICT - PCI SERIAL BUS CONTROLLER ON MOTHERBOARD. Everytime I try to reboot it gives me the same thing, and I really can't change into the default settings since it doesn't do anything.
 

A:PCI Serial Bus Controller Motherboard

Read other 9 answers