Over 1 million tech questions and answers.

No Repair IE5 function

Q: No Repair IE5 function

I did a reinstall of windows 98Se and now have IE5.0....It is giving me nothing but problems, I think...i want to use IE repair but there isn't any function like that on my computer...I have been to add/remove programs>>no IE there, went to System Tools\information>>no IE repair there, went to msinfo32>>no repair there either....I have slow page turning and my Outlook Express will not function...cannot download folders, messages, have removed accounts, rebooted, reinstalled accounts...nothing...what do i do????
thanks donna

RELEVANCY SCORE 200
Preferred Solution: No Repair IE5 function

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: No Repair IE5 function

Read other 6 answers
RELEVANCY SCORE 49.6

Using XP Professional

Is there a general repair tool I can try before I reformat?
 

A:XP - Is there a Repair function?

well, the xp cd has the repair stuff on it you could try(if its not booting properly or at all). Dont know exactly what it does but i know its there. You just pop the cd in, start up the computer(make sure it boots off of cd ie cd before ide-0 in bios) and pretend your making a fresh install and somewhere along the way it will ask if you want to fix a current xp install(or something like that). Hope this helps
 

Read other 2 answers
RELEVANCY SCORE 49.6

When using the XP repair function, what do you use for an administrative password if you did not use a password when you set up windows? I left the PW Blank and now I need to use the repair function and it's requiring a PW> What do I do?

Thanks, Sherm

A:Win XP Repair Function

http://www.dslreports.com/forum/remark,14828505

Read other 2 answers
RELEVANCY SCORE 48.4

I'm using an application which is using MAPI functionalities. OL 2000 needs another version of this file. Therefore the self-repair function tries to replace it all the time when I start OL2000. I'd like to disable this feature. Does anybody know how to do so?
 

A:How to disable repair function in OL2000?

From what I know, the repair function is automatic and can not be turned off. The only solution I can give you is to contact Microsoft and see if they have the file you need.
 

Read other 1 answers
RELEVANCY SCORE 48.4

Hi:
The troubleshooter & Repair tool has stopped functioning since I have updated my Windows version to 2004 (OS Build 19041.1). Could you tell me is there any way that I can get it fixed?
Thanks,


RezaNiazi

Read other answers
RELEVANCY SCORE 48.4

I have a version of windows XP Home where the boot up is corrupted or damaged. What happens is that the system trys to reboot when it gets to the screen that indicates that it has not been properly shut down.

As there are some personal files on the drive I want to keep I have been trying to use the Windows XP Home Edition Repair function.

I have been trying to use the command to restore the files that I found in Windows XP Professional Help

"msiexec /f[p][o][e][d][c][a][m][v]"

When I try this command the system doesn't recognize it.

The system has a NTFS File system so a boot disk to read my files hasn't helped me

Does Windows XP Home have a different command for this function?

Any help I can get to resolve this problem and recover my personal files would be much appreciated.
 

A:Windows XP Home Repair Function

Kuwaiti Kid,

You might try fixmbr;Install and Use the Recovery Console in Windows XP .
 

Read other 1 answers
RELEVANCY SCORE 48.4

Hello everyone

I decided to make this post because I used to have a lot of problems with xp logo. Somehow it look like, with help of google, I fixed it but it doesn't work as it should, so I would like to kindly please for your help.
Here is description:
About a week and a half ago when I boot my PC (no matter from restart or from turning PC on), it used to freeze when XP Logo appeared on the screen. Everything I have done (before this began) was uninstalling, reinstalling and using once Spybot Search & Destroy. Progress bar stopped in the middle of "filling". I haven't been able to come to the desktop. I couldn't use safe mode and I was getting the error message:
"We apologize for the inconvenience, but Windows did not start successfully. A recent hardware or software change might have caused this. If your computer stopped responding, restarted unexpectedly, or was automatically shut down to protect your files and folders, choose Last Known Good Configuration to revert to the most recent settings that worked. If a previouns setup attempt was interrupted due to a power failure or because the power or reset button was pressed or if you aren't sure what caused the problem choose start windows normally.
Safe mode
Safe mode with networking
Safe mode with command prompt
Last known good configuration (your most recent settings that worked).
Start Windows normally."

Bootable Windows XP (I had SP2) always worked.
However I fixed this pro... Read more

A:Repair Function - Majority Unwanted Changes

Read other 14 answers
RELEVANCY SCORE 48.4

Cannot Repair Windows 7, 64 bit, with Disk provided with computer.

My problem started with right clicking on a remote drive and hoping to view the Properties of the drive. I got that infamous "Windows explorer has stopped working" message.

I tried most of the solutions listed on the forum to no avail.

As a last resort I was going to use the disk provided and access the repair capability. That did come up but when selected I got the message "This version of System Recovery Options in not compatible with the version of windows you are trying to repair. Try using a recovery disc that is compatible with this version of windows".

Has anyone run into this? Other than the above everything seems to function OK.

I do use MS Security Essentials and Spybot Home.

Thanks in advance

A:Win 7 Disk Repair Function Don't Work

Is the system failing to start now? What messages are you getting at startup?

Is this a pre-built system or a home built PC? If it's pre-built (DELL, HP, etc) turn off the PC and restart, as soon as you turn the power on press F8 repeatedly until you get to the alternate boot menu. There should be an option to Repair Computer which should allow you to access the repair function.

Read other 11 answers
RELEVANCY SCORE 48.4

Hey guys... I have some problems with IE6.0... it won't let me log into my web-based email accounts...

I keep getting an "intrusion detected" notices (even if I ask to "expire page views" at login).

so I want to REPAIR IE6.0 using the ADD/REMOVE option in Control Panel, and then Click REPAIR.

I tried to re-install IE6.0 from the Add/Remove Programs dialogue.... BUT my computer came pre-installed with IE6.0 (I'm using windows XP), so the Add/Remove IE6.0 option is not there.

So how do I start the Repair IE6.0 option if the Uninstall/Add/Remove button is not there????

Please help.
Rgds,
Double07
 

A:How do you start IE6.0 REPAIR Function in Windows XP???

There isn't a IE repair option with XP/6.0.

But what are these 'intrusion notices' you're receiving?
They probably don't point to anything being wrong with IE itself.

Grtz.
 

Read other 1 answers
RELEVANCY SCORE 48

My son recently bought himself Skyrim for his HP Probook4525a laptop (which he also bought himself, so it's not top of the line). He said that it doesn't play well, glitches or freezes. He has tried reinstalling it a couple of times.

I see that it requires 2gb ram, but his laptop shows 1.8gb. So I assumed that means I should add ram. My brother told me he needs a new hard drive or video card. How the heck do you know what to add or change?

I tried scanning at crucial.com but after I open the download nothing happens. No results, nothing.
 

A:How do I know what to upgrade/repair on laptop for game to function well?

using the laptop in question go here; http://www.systemrequirementslab.com/cyri
select Skyrim from the games menu and run a test. It will point out the areas that fall short. (with the java problems of late, you may want to download and install the test scanner if you have Java disabled)

also, the 1.8 gigs shown does mean 2 gigs. just the way computers read the bits and stuff. Also might not be showing the chunk of Ram it took for video memory. (All depends on what is in the system specs.)
More ram would help, but for heavy 3D games usually a graphics card is the best option.

Think TSG has a system analyzer, might want to run that on the laptop so we can see what is in it.
 

Read other 1 answers
RELEVANCY SCORE 48

I started up my laptop the other morning an just as windows is loading a BSOD flashes for a millisecond and then the computer restarts. It did this 5 times in a row before I finally gave up. I found the windows vista cd that came with the computer and booted from it. Once the DVD loaded I clicked accept and it took me straight to a new install with no repair function which should be included on the recovery disc. I rebooted multiple times, here is no repair option. To make matters worse, I only have 5.9 gigs free on my hd and vista requires 6.6 to install. The only option I have is to reformat the drive, which is out of the question as I have lots of documents saved that I cannot lose. So at the moment the recovery DVD is useless to me, and I cannot load windows to delete some files to make room for a new install.

I took a video of the loading screen and was able to pause it at the frame when the BSOD flashes, here is the stop message: STOP: 0xc0000005, 0x00000200, 0x83354964.

I tried removing one stick of ram at a time thinking maybe one had gone bad it didn't make a difference. I'm at a loss right now. No matter how I try to load windows, safe mode, etc, I get a BSOD and it restarts, and my windows recovery DVD is useless with my hd nearly full.
 

A:BSOD during startup, no repair function on recovery cd

Nobody? There's no way to delete files/folders without using the command prompt on the recovery disc?

This really makes no sense and I'm beyond frustrated. Why is there no repair selection when I boot from the vista DVD.
 

Read other 2 answers
RELEVANCY SCORE 46.8

Dear Everyone,

Sorry to trouble all of you, but I've pretty much exhausted my google-fu. Thus, I figured that I should stop trying to throw things against the wall, and rather just see if there's someone wiser here who can help me out. Now, before you tell me, I am totally aware that I could easily cut my losses just by doing a re-install, which would make the Windows.Old folder and such, most of which can be easily put back via a command prompt script. However, being that this computer has software whose installation disks I do not have, I do NOT want to do a re-install, since it'll break program association and possibly other things which I cannot correct by re-installing them.

As far as I know, the machine in question is a Dell XPS M1530, with Intel Core 2 Duo T7250, Nvidia 8400M GS, 2GB RAM, and WD Scorpio Blue 250GB Hard Drive. It is running Windows 7 Ultimate, upgraded from Vista Home Premium, with all updates, software patches, and security fixes current according to Windows Update. As far as virus and malware goes, it has ESET NOD32 v4.7, Malware Bytes, and Spybot-S&D installed, with each being fully updated and scans immediately prior to the crash stating that the machine was clean. In addition, after the crash, I attempted to scan it with Avira, Dr. Webb, and Hiren's Boot CD, all of which stated that the machine is free of infection/threat.

Below, I'll attempt to take you guys and gals through everything, from the initial symptoms to the bag of tricks that... Read more

A:Dell XPS M1530 Startup Repair Loop, Offline SFC does NOT function

Nevermind, see you tried Startup Repair Infinite Loop Recovery... It appears you have done everything humanly possible to fix it through Windows. Try TestDisk through PartedMagic which you can obtain from the Ultimate Boot CD Overview through the download link.

Regain a lost drive using Test Disk - An Illustrated Guide will help you repair the hard disk partitions.

Read other 9 answers
RELEVANCY SCORE 42

Is this what the future has come to? When I have a fatal problem with my OS I have to start all over again? XP repair install is way better than this.

A:Is 'Upgrade install even meant to function as a repair install at all?

In Windows 7, a repair install is also known as an "in-place upgrade install". This tutorial explains how to perform a repair install and also shows how to obtain a legal installation disk if one is needed.

Repair Install

I've successfully repaired several Windows 7 machines and in each case it took less than 90 minutes. After completing the process it will be necessary to reinstall Windows Updates. That could take another 90 minutes or more depending on how many updates are available.

Some folks prefer doing a clean install just to get rid of the factory bloatware and start off with a wiped hard drive. One of the Forum experts prepared a tutorial on how to clean reinstall a factory OEM machine.

Clean Reinstall - Factory OEM Windows 7

And the basic clean install tutorial.

Clean Install Windows 7

Hope this helps.

Read other 8 answers
RELEVANCY SCORE 39.2

Starting a new post on an old topic as most answers are years old and reference solutions that don't work anymore (e.g. editing , or using lenov settings software) Question:How do i lock the function keys?  I.e. if the key with F1 has the mute symbol on it, how do i get it  where i just need to push F1 to mute the laptop.  to put it the way another poster did, "how to swap FN function keys to just press F1 without Fn+F1?" All the litterature says "My Device Settings" but all i see there are- Battery- Power- Energy Star- Other (all this has is the Lenov Vantage toolbar)   

Read other answers
RELEVANCY SCORE 38.8

I wanna make sure if a path exist or not? I'm using this code but it's not working:
Code:
If dir("C:\Text Files", vbDirectory) = "" Then
MsgBox "dir worked"
End If
but it lead to a compile error, any idea why?
 

A:Solved: dir function error; Expected function or variable

How about this one:
Code:
Sub test()
On Error GoTo NoDir
ChDir "C:\Text Files"
MsgBox "dir exists"
Exit Sub
NoDir:
MsgBox "dir does not exist"
End Sub

Jimmy
 

Read other 2 answers
RELEVANCY SCORE 38.8

I have an Acer aspire one netbook and I've heard about some keyboard problems. My volume function isnt working at all. All the other function keys work except for the volume control (up and down arrow). They work when scrolling etc. They only DONT work when I have the function key pressed as well. Help!!!
 

Read other answers
RELEVANCY SCORE 38.8

Here's the deal - I have a quick shortcut to my C drive on the desktop, so that I can just double-click it and go straight to browsing my files. However, today, the search function decided to make itself the primary function. When I double-click it now, it opens a search window instead of the C: drive.

Can someone tell me how to make it so double-clicking it will, by default, use the "open" function instead of "search?" Thanks in advance!
 

A:Solved: Search function has overridden open function in XP

Read other 13 answers
RELEVANCY SCORE 38.4

Hello,

I've been unable to access my custom build computer since around 5:00 yesterday. I chose to restart my computer at around that time just because it was slowing up a little and I usually do that to help, I had not installed any updates or new programs since 2 days ago when there had been a few windows updates.

Upon returning to my computer I noticed that it had been unable to startup and had gone straight into system repair with it being 'unable to repair this computer automatically.' I rebooted several times and noticed that it was not a visible BSOD but as soon as the 'starting windows' icon began to appear it went straight into startup repair. I tried to boot into safe mode, tried to load previous good configuration and all of the other advanced recovery options (including system restore/image and many command prompts).

This is what it shows after being unable to repair automatically:

Problem signature name:Startup repair offline
Problem signature 1: 6.1.7600.16385
Problem signature 2: 6.1.7600.16385
Problem signature 3: unknown
Problem signature 4: 21200552
Problem signature 5: Autofailover
Problem signature 6: 11
Problem signature 7: Corrupt file
(then my O.S. version)
Locale ID: 1033

This diagnostic occurs every single time I run the startup repair. Also, command prompts I have tried using the WindowsRE command prompt and the one found on the 'repair your PC' option on the windows 7 installation disk are:

-All bootrec.exe ( /fixmbr /rebu... Read more

A:Startup repair loop - Can't repair with system restore/repair/commands

Have you tried copying over the backed up reg hives from the regback folder? Follow steps 8 onwards in this tut.

Startup Repair Infinite Loop Recovery

Read other 6 answers
RELEVANCY SCORE 37.6

Hello

My pc is :C440 Touch All-in-One (Lenovo)


Operating system : Windows 10

I can't run my PC, every time i try to run it shows me blue screen wrote on it

" Automatic repair couldn't repair your PC

Press " Advanced options" to try other options to repair your PC or "Shut down" to turn off your PC.

Log file :\System32\Logfiles\Srt\SrtTrail.txt "

I tried to use the most options but none of them worked such as System restore, every time i click on it, it says : System restore could not find the offline boot volume. Please ensure it is currently accessible.


By the way before one day since this problem happened i created system restore point



My pc is Lenovo while running it i clicked F2 and it opened for me Onekey Recovery its Lenovo Tool, it has option called initial backup but i dont know if it backup from the system restore point i've created or what exactly.
Please help i need to solve it ASAP, i have many important university files on my PC and i don't need to lose them

NOTICE : I tried all the options in the repair screen such as " Reset this PC" , "Startup repair" ... and more, all of them give me message when i click on them please if u want know what message i get, let me know what option and ill write it because too many erorrs

and i got a dvd contain install of windows 10 ( ISO file ) and able to run it on my pc

A:Automatic repair couldnt repair your PC (Repair screen win10)

You might be better off doing a clean install. You won't need to enter the key as its already been associated with your computer.

Backup any files you want to keep first.

I am not certain but it may take the install files from the recovery partition (perhaps someone can confirm this), I know this worked with a recent HP job I did.

Read other 1 answers
RELEVANCY SCORE 36.4

Just recently, my Windows 8.1 desktop seems to have developed two issues. Not completely sure they are related, but upon doing some research on the internet, it seems that they may be.

First issue I noticed is that I cannot open any of my pictures using the photo app. Normally I open images with Windows Photo Viewer, which still works, but occasionally, I open them using the "open with" function with the photo app (Photo) for quck editing, like cropping, etc. Today, when I tried to open anything in the app, the app comes up, thinks for a second, then goes black and minimizes itself to the tray at the bottom of the screen. If I click on that, it simply goes through the same process. No error messages, just no image and it won't stay up on the screen. So in googling this problem, some mention the Windows Search indexing may not be picking up the photos. I go to the "start" screen as I normally do and simply start typing services.msc to bring up that services window, but nothing happens, and instead of getting a list of search choices as normal, the screen just freezes for a minute. I then clicked on the little magnifying icon to bring up the search box, and again, nothing happens and the screen freezes for a minute.

So I manually went to Services and checked to make sure that the Search service is on, and it is, it is set to "automatic (delayed start)" I tried switching it to just the automatic start, but that did not make any difference. ... Read more

Read other answers
RELEVANCY SCORE 33.6

I am using my cellphone because my computer is stuck in startup repair mode. I have windows vista.I can choose repair or normal, both run start up repair. It always fails after multiple attempts. I chose advanced options after failures and tried to do a hard drive restore to several different dates. It always says its successful and restarts, but goes into startup repair again every time. I have called ms tech support, and not surprisingly my problem requires advanced help that costs money. They did have me restart and push f8 to launch safe mode, but it ended up in startup repair also. I have agreed to pay them but set up an appt for next tues. They said i can cancel and get my money back if i want. They said my problem is fixable and my photos and files will be there. I just feel like i may have a better option and I'm hoping this website is it. I can restart my computer and give the details if its needed. I am desperately seeking your help and would definitely donate if you can fix my computer and i dont have to pay ms. I am not a computer idiot, but definitely NO expert.
 

A:stuck in startup repair, vista startup repair, repair failures

Hi, check the following link.
http://support.microsoft.com/kb/927392/en-gb
Boot from the Vista DVD
Follow the link above to reach - Command Prompt.
At Command Prompt - Type.
bootrec.exe
Press Enter.
It will now give you some options.
Type
bootrec /fixmbr
Press Enter.
Let it finish fixing the Master Boot Record.
Type Exit and exit Command Prompt [remove the DVD] and restart you pc.

If the above does not work - use the DVD and back to Command Prompt.
Type
bootrec /fixboot
Press Enter
Let it finish fixing the boot sector.
Type Exit and exit Command Prompt [remove the DVD] and restart you pc.

I would try and back up any needed data and files first, before you do the above.
How to use Linux live Cd to backup files from a dead Pc
 

Read other 1 answers
RELEVANCY SCORE 33.2

Hello

a few examples are. - just looking for a brief explanation thanks.

like:

void someFunction()

or

someFunction (void)

thanks for any help.
 

A:Solved: need help with the function (void), or void function()... idea.

Read other 11 answers
RELEVANCY SCORE 32.8

Windows failed to start, startup repair cannot repair this computer, safe mode cannot load, chkdsk freezes, sfc scan cannot perform the requested operation

Hi, I cannot start my Windows 7 at all. With power on, the system tries to load up but: ' windows failed to start.A recent hardware or software change might be the cause'. Trying to open safe mode or last good configuration doesn't work, it goes automatically to startup repair but after about an hour trying it says ' Windows 7 Startup Repair Cannot Repair This Computer ' (tried a few times). After another reboot with a windows 7 repair disk in the drive I managed to open the recovery manager from the DVD instead of the HDD and tried all the options - system recovery does not work, i have no previous images of the system, I ran a scan on the memory - it was all clear but still windows not starting. Then I did CHKDSK and it froze at 11% on stage 4 of 5, that happened a couple of times so I decided to run an sfc scannow but another error: 'Windows Resource Protection could not perform the requested operation'. So I'm totally stuck and don't know where to go next, I've got no windows installation disk, only repair disk. Any ideas would be much appreciated!

A:Windows failed to start, startup repair cannot repair this computer, safe mode cannot

Hi and welcome to TSF what is the make and model of the computer,is just a repair disc or is it a recovery disc does your machine have a recovery partition,have you tried removing and reseating the ram or running any diagnostic test like memtest 86 + or seatools for dos

Read other 3 answers
RELEVANCY SCORE 32.8

I bought a brand new X1 Extreme directly from Lenovo, delivered a few months ago (Dec 2018).I initially got a 'single fan error' very rarely.A few days ago I updated the Thermal driver and, perhaps coincidentally, started getting single fan error on every restart. I did a system restore, but not sure it rolled back the Thermal driver. Today I updated the BIOS hoping this might somehow help.Interestingly, the 'single fan error' (which shows up at boot time before Windows loads) happens on every Windows 10 'restart'; however the 'single fan error' does not happen if I perform a Windows 'shutdown' and then start the laptop manually (using power button). Given it is not consistent is this always a hardware issue or could it be some type of driver / setting issue?Is there an easy way to check the dual fan operation is working, using system info or another utility / app?I don't want to have to send the whle laptop in for repair if not a hardware issue and I use my laptop daily. If it does turn out to be a hardware issue, can Lenovo send a new fan so i can install it myself?

A:3 month old X1 Extreme with 'Single fan error' - Repair required? 'Carry in' or 'send in for repair?

I updated everything (latest BIOS and drivers) and it is still occurring, so it appears to be a hardware issue.Disappointed since this laptop is only 3 months old! Never had a fan go on a computer, let alone one that is only 3 months old. Guess I need to send my laptop in for repair, unless there is a local service provider I can take it to for the fan repair / replacement? Any recommendations on best option to handle this?Based on others' experiences here, what is the approximate repair turnaround time for something like a fan replacement / fan repair? https://pcsupport.lenovo.com/us/en/contactus Thanks for any guidance! 

Read other 1 answers
RELEVANCY SCORE 32.8

I need some help, please.
I couldn't find Windows 7 Repair Disc / Repair System / rewrite MBR for x64
Can you give me some advices, please ?
Thank you

A:couldn't find Windows 7 Repair Disc / Repair System / rewrite MBR

Please give us the exact problem you're experiencing if there is one.

Otherwise: System Repair Disk
System Repair Disc - Create
System Recovery Options

Read other 1 answers
RELEVANCY SCORE 32.8

We have a VGC-LS25E Series Sony Vaio desktop computer. When we attempt to start, start up fails and when we run start up repair, the error message says start up repair cannot repair this computer automatically. When we view problem details we recieve a message saying problem event name: StartupRepairV2 followed by 10 problem signatures.
Problem signature 01: AutoFailover
Problem signature 02: 6.0.6000.16386.6.0.6001.18000
Problem signature 03: 6
Problem signature 04: 1310740
Problem signature 05: NoRootCause
Problem signature 06: NoRootCause
Problem signature 07: 0
Problem signature 08: 1
Problem signature 09: SystemRestore
Problem signature 10: 0
OS Version: 6.0.6000.2.0.0.256.1
Locale ID: 1003

Please help? What should we do next?

A:Vista startup repair cannot repair this computer-- problem event name StartupRepairV2

Hi jessie,
Did you get any factory recovery disc's when you purchased the PC, Or do you have any repair disc's from microsoft, If you do, try them, Try going into safe mode and doing a system restore,let me know how you do, good luck patch41

Read other 2 answers
RELEVANCY SCORE 32.8

Hi all - my laptop refuses to boot and when I start in repair mode I get the BSOD with just the cursor visible and nothing happens.

If I reboot in safe mode then it hangs at windows\system\drivers\bootdefragdriver.sys

I have researched and believe this driver is linked to Glarys Utilities, but am obviously unable to uninstall the program or driver because I can't boot into Windows.

I therefore downloaded an ISO file and created a USB boot disk (as per one of your tutorials) with the intention of rebooting into repair mode, but when I boot from the USB and press F8, there is no repair mode option. All it does it try to reinstall windows from scratch, which I am reluctant to do.

Does anybody have any suggestions of how I can either delete the bad driver (if that is indeed the problem) or how I can still get into repair mode from the USB drive?

Many thanks

A:BSOD upon repair mode, UBS boot disk created but no repair option

I think if you don't want to reinstall then you could try booting the laptop with a Linux live cd/usb and renaming/deleting bootdefragdriver.sys and seeing if that helps

Peppermint Live CD/DVD/USB - Create for Emergency Backup

Read other 3 answers
RELEVANCY SCORE 32.8

Hi,

I have a problem with my HP Pavilion MS228UK. When I power it on, it runs Startup Repair and then gives me the mesage 'Startup Repair cannot repair this computer automatically'. In the details all the tests were completed successfully with error codes '0x0' except the last one which gave 'error code 0x490' with the message 'No OS files found on disc'. I ran the memory diagnostic tool which found no faults. I have tried to boot system recovery using F11 but that is not working either.

All help appreciated
Thanks
 

A:Startup Repair cannot repair this computer automatically(No OS files found on disc)

Does the BIOS detect the hard drive? Is there a hard drive diagnostic that can be run (there usually is when a memory diagnostic is also included)?
 

Read other 2 answers
RELEVANCY SCORE 32.8

My problem started last night as I was trying to boot in safe mode with networking to install and update malwarebytes to get rid of a spyware problem. I was unable to start my computer with safemode using f8, so I used the misconfig boot.ini method and selected safeboot with networking. Then I was able to get to the boot sequence menu, but whichever option I picked (safe mode, normal, last working configuration, etc), the computer just restarts.

Then I tried to repair windows with the xp cd and it completed at 100% and needed to "restart to finish the setup process." However, right now whenever it restarts, it will automatically go into safe mode, and I would get an alert saying "'win xp setup cannot run under safemode. Setup will restart now." I have tried pressing okay, x-ing it out and a manual shutdown. But whatever I do, the same cycle will happen over and over again .

I later found out about the f5 key and tried using that to boot normally, but it still goes into safe mode. My question is.. is there a way to override the msconfig settings so that my computer can boot normally and finish the setup process, OR to get the setup NOT to finish so that I can change the msconfig settings back to original.

I would really like to backup my files before doing a reformat. Any help is greatly appreciated!! Thanks in advance
 

A:Cannot access windows after win repair -- safe mode & repair setup conflicts

First of all you could use any Linux Live-cd program to make a bootable cd from a downloaded iso file and then boot to Linux and then copy and paste whatever files you need to a usb flash drive or external hard drive.
What I would suggest first though is boot to first "r" for Recovery Console and run "chkdsk /r" to repair the hard drive.
http://support.microsoft.com/kb/315265
 

Read other 2 answers
RELEVANCY SCORE 32.8

Firstly, thanks for reading.

My PC runs Windows 7 x64. I built it myself about a year ago for gaming.

Occasionally running games I would BSOD and it would suck. I'd update all my drivers or try some game-specific fix and usually if I didn't fix it, I would just start playing something else until I remembered it and by then, some Windows update or my own tweaking or just divine providence would have stopped the bluescreens. A few games, like GTA IV, Bioshock Infinite and Spec Ops: The Line remain unplayable for me, as they constantly bluescreen no matter my alterations or updates, but that's another story.

My problem is with Startup Repair. I was playing Max Payne 3 last night, all was well, then BSOD. To note, I never actually see the blue screen, the video cuts and the audio stutters for a moment, then the computer restarts. But in the .dmp files they're always reported as BSODs. Anyway, I restart and do some other stuff, then turn it off for the night. Today, I turn the PC on, and it prompts me to Start Windows Normally or launch Startup Repair. I chose to repair, thinking it was probably time I let Windows have a shot at it for once.

Well, I'm sitting a feet away and watching the screen right now, and it's going through the third consecutive automatic repair. In the past few hours I've run memory diagnostic, gone through the Startup Repair Infinite Loop Recovery thread with the MD mybackup stuff, attempted chkdsk (can't due to a lack of write privileges, even... Read more

A:Startup Repair to infinite reboot loops, Repair errors 0x5 & 0x490

Post back a screenshot of your maximized Disk Management - Post a Screen Capture Image - Windows 7 Help Forums so we can check your disk config.

If you can complete collecting the info requested in Blue Screen of Death (BSOD) Posting Instructions - Windows 7 Forums post it up in Crashes forum if this thread is not moved there.

Otherwise work through these same steps for Troubleshooting Windows 7 Failure to Start which try everything to repair unstable Win7 including hardware tests if indicated, and if necessary getting a baseline perfect Clean Reinstall.

You also want to do your System repairs only from the WIn7 DVD (provided) or System Repair Disk, not the automatic repair which depends on possibly corrupted files.

Read other 9 answers
RELEVANCY SCORE 32.8

Hi,
I installed Roxio Easy media creator 7 a while ago and I just did a windows xp repair but now roxio keeps bringing up this message:

* Please wait while windows configures Roxio Easy media creator 7 basic DVD edition...
- The only opton is cancel...

If I cancel it keeps coming up...

If I let it run through it says

*"Error 1706 no valid source could be found for product Roxio Easy media creator 7 basic DVD edition windows cannot continue"

then goes back to the first message and tries again...
Roxio 7 still works perfectly fine when I open it from desktop or start!
however whenever I open a browser, or try and rename a folder or save something it comes up with the error mentioned earlier...
it just keeps doing this and stops me continuing my work...

I have lost my Roxio 7 cd so I can't install the disk to fix this problem...

I found however my Roxio 6 disk so I tried just removing Roxio 7 using add remove programs... but this just brings up the same error... and wont uninstall...

does anyone know how to stop this message coming up?
(note roxio works fine I just want to stop the error message- but failing that does anyone know how to get rid of the program altogether)

thanks for your time

Miki
 

A:Error from Roxio Easy Media creator 7 after repair through windows repair

I encountered the same problem awhile back; it's a known bug with the Windows Installer.
MOPER made this suggestion & it worked perfectly for me. Give it a try..

Download the Windows Installer CleanUp Utility.
here

Install and run it, look for an entry similar to "WordPerfect". Delete the entry and all should be fine.
[*] NOTE: Please replace "WordPerfect" with the name you got from the Windows Installer"
__________________
 

Read other 3 answers
RELEVANCY SCORE 32.8

We have a VGC-LS25E Series Sony Vaio desktop computer. When we attempt to start, start up fails and when we run start up repair, the error message says start up repair cannot repair this computer automatically. When we view problem details we recieve a message saying problem event name: StartupRepairV2 followed by 10 problem signatures.
Problem signature 01: AutoFailover
Problem signature 02: 6.0.6000.16386.6.0.6001.18000
Problem signature 03: 6
Problem signature 04: 1310740
Problem signature 05: NoRootCause
Problem signature 06: NoRootCause
Problem signature 07: 0
Problem signature 08: 1
Problem signature 09: SystemRestore
Problem signature 10: 0
OS Version: 6.0.6000.2.0.0.256.1
Locale ID: 1003

Please help? What should we do next?

A:Vista startup repair cannot repair this computer-- problem event name StartupRepairV2

Please stop posting the same thing over and over. Once is enough. Be patient. Someone will reply in Vista startup repair cannot repair this computer-- problem event name StartupRepairV2.

I'm requesting this thread also be deleted.

Anyone responding, please use the above thread instead of this one.

Thanks!

Read other 1 answers
RELEVANCY SCORE 32.8

I have a Packard Bell easynote (TM98-GN-030UK), and have had it since Christmas.

On Wednesday, it failed to startup, flashing a quick blue screen and then immediately rebooting. Therefore I cannot get information from the blue screen.
The startup repair option goes to a default blue screen with green nature-y bits. It loads no options, even if I leave it for an hour.

I have tried the system repair disk. It goes to the same background, asks for my language/keyboard settings, and then when I click 'next' again does nothing.

So, I cannot access any kind of repair or restore options as neither does anything beyond show me the default background.
Thanks,
Alsvid

A:Both Startup Repair and System Repair Disc just go to blue backgrounds - no options given!

Have you read the...PB documentation on using these disks?

http://il.packardbell.com/pb/en/IL/content/download

Louis

Read other 4 answers
RELEVANCY SCORE 32.8

Hello, what is the repair cost
for repairing a CPU socket on a Sandy Bridge motherboard?
Sadly i didnt know my motherboard had a damaged CPU socket until the reseller told me and therefore they also refused a refund wich also was the reason i sent it back to them in the first place, same day as i recieved it, when i later on read on hardware forums that intel recalled all Sandy Bridge motherboards.


Sadly these kinds of damages is not covered by the warranty, and I have also been told that
i wont get a refund, and its my word against their and really I dont see how I could have damaged the CPU socket when i didnt even had ordered a CPU yet.

But, not much to do against a big company and therefore i would like to know what the cost is to repair a CPU socket on a motherboard. I have read on some other forums like xtremesystems that moderators there telling that its about a 25 $ cost on repairing or replacing the motherboard CPU socket, and I would like anyone here to confirm this for me, or what other kind of prices there is for repairs that is not covered by the warranty, and sadly my reseller didnt accept the motherboard and told me i damaged it, which i didnt but i cant proof that they are lying so.

Is it true that there is about a 25 $ cost for repairing or replacing a CPU socket on a motherboard, and if not what is the cost?
 

Read other answers
RELEVANCY SCORE 32.8

When there is a failure to boot there can be many error codes.
For windows 7 professional using a windows 7 iso > command prompt > Administrator X:\Windows\system32\cmd.exe
This command can be ran:  sfc /scannow /offbootdir=d:\ /offwindir=d:\windows
1) how do you determine the applicable drive letter?
a) would you run bootrec /scanos ?
b) would you run bcdedit /enum all  ?
c) would you run bcdedit | find "osdevice"
d) diskpart > list disk > list volume > dir c: > dir d: > dir e: etc.
Which of the above can and cannot be run depending on the error message?
2) if you run the command and it indicates that it found corruption and was not able to fix all of it what are the next options?
a) don't all of the dism commands fail to work in a windows RE?
3) There is a command attrib c:\boot/bcd -h -r -s    what do each of the letters mean?  when do you need to use this command?
4) If the failure to boot windows indicates that a critical file is missing that ends in .sys or ends in .dll does that alter the method for troubleshooting?  
a) do you specifically look for a replacement file?
b) if so how would you replace a specific file in the windows RE using command prompt?
c) if you do not look for the specific file is the error indicating that it is a failure to boot and it needs fixmbr, fixboot, bootrec /rebuild?
d) or if you do not look for the specific file is the error indicating that it can ... Read more

Read other answers
RELEVANCY SCORE 32.8

Hi All,

Looking for some advice. I had a sudden BSOD earlier and upon restarting my PC it came up with Startup Repair, only to have it fail to repair the issue. I have been following this thread which seems to have stemmed from the same issue. I too am running Avast, so I suspect that may be the problem.

I have been following the steps in that thread and have reached the point of removing Avast keys in Regedit. I previously ran checks and also attempted to repair from the Win7 OS CD as was suggested in that thread.

I think that following the steps to remove Avast files may be the solution to my issue - however, as I am aware that Regedit can be dangerous to mess around with I wanted to check in and make sure I am following the steps correctly.

System info: Self-built PC, running Windows 7 on a Crucial M4 SSD, with two WD Caviar Black HDDs as storage drives.
CPU: Intel i5-2500k (not OCd)
GPU: EVGA nVidia 970 FTW
RAM: 4x4GB

It appears to have re-mapped my drives, my SSD is C: normally while my HDDs are E: and F:, but the system is currently reading C: as the Windows reserved partition of the SSD, the rest of that drive as F:, and the HDDs as D: and E: instead. This is in line with the user (Lethorio) in the earlier thread, however.

So, where I'm at now. I am around posts #65-70 in that same thread and have found avast keys. Here are the keys in the first folder which appeared in the search results:

(Default) REG_SZ (value not set)
Capabil... Read more

A:Avast Issue - Startup Repair Cannot Repair This Computer Automatically

Use the Avast uninstall tool. It's not necessary to make a Registry change.
https://www.avast.com/uninstall-utility

Read other 14 answers
RELEVANCY SCORE 32.8

I just finished reading this thread http://www.techsupportforum.com/forums/f217/cannot-boot-windows-startup-repair-cannot-repair-this-computer-automatically-663898.html as I'm having the same issue. Here's a brief history.

My computer was built by me and has been fine up until a few days ago after I removed some USB cables for devices that I then hooked up to another PC I have and reconfigured some USB devices as a powered hub I was using would not let them be recognized by Windows. When I opened the Attached Devices window to see if my devices were now recognized it took forever to open with the blue bar at the top never getting to the end. I Googled the problem and found that Bluetooth was may be causing the issues and to disable it. That didn't fix the issue so I tried other recommended fixes such as disabling printspool -- none worked.
I then started having the Cannot Boot problems so I let Windows try and fix it which it could not. I tried to let it restore from a previous good point but that failed and I would click Send Report and then it would shut down. This kept happening for several days until I came across the aforementioned thread here on the forum.
Last night I turned off the power and went to bed. This morning I switched on the PC and let it boot up. Lo and behold WIN7 started right up no problems -- the Attached devices window opened right up as well. Then I saw that it was loading drivers for 3 attached devices -- all USB devices and one r... Read more

A:Cannot boot windows - Startup repair cannot repair this computer automatically

Update
I unplugged two USB cables leaving just the keyboard and mouse an rebooted. Windows starts just fine but then starts to install drivers for three USB devices. Not sure what they are as all I have plugged in are the keyboard and mouse. Any way of finding out what devices Windows installed drivers for?
Thanks

Read other 1 answers
RELEVANCY SCORE 32.8

HELP !!!
I have an Acer desktop running Windows 7 SP1. When I try to start it up I get the Windows Error Recovery screen ? Windows failed to start.

I launched the recovery option it runs for about 20 mins with the message Startup Repair cannot repair the computer automatically.

Problem Event Name: StartupRepairOffline
Problem Signature 01: 6.1.7600.16385
Problem Signature 02: 6.1.7600.16385
Problem Signature 03: unknown
Problem Signature 04: 382
Problem Signature 05: AutoFailover
Problem Signature 06: 1
Problem Signature 07: 0x7f
OS Version: 6.1.7600.2.0.0.256.1
Locale ID: 1033

Startup Repair Diagnosis and Repair Log displays the following details:
Last successful boot time: 7/29/2016 09:50:09 PM(GMT)
Number of repair attempts: 1

Session details

System Disk = \Device\Harddisk0
Windows directory = C\Windows
AutoChk Run = 0
Number of root causes = 1

Test Performed:
Name: Check for updates
Result: Completed successfully. Error code = 0x0
Time taken = 0ms

Test Performed:
Name: System disk test
Result: Completed successfully. Error code = 0x0
Time taken = 0ms

Test Performed:
Name: Disk failure diagnosis
Result: Completed successfully. Error code = 0x0
Time taken = 78 ms

Test Performed:
Name: Disk metadata test
Result: Completed successfully. Error code = 0x0
Time taken = 63 ms

Test Performed:
Name: Volume content check
Result: Completed successfully. Error code = 0x0
Time taken 484 ms

Test Performed:
Name: Boot manage... Read more

A:Startup repair cannot repair this computer automatically - wont bootup....jxl

Hi, have you tried running it from your install disc Repair Startup in Windows 7 from the Windows DVD

Read other 19 answers
RELEVANCY SCORE 32.8

I've been having the same problem as big0 
 Windows 7 update was canceled boots to repair screen can't repair
And in your post try a windows repair from windows disk i go to part b  step 6b but  System Recovery Options does not find Windows 7 operating system What do i do now 
 
Moderator Edit: Split from another topic to prevent confusion
Roger

A:Windows 7 update was canceled boots to repair screen can't repair Too

Hi, Is this the same computer as here?
http://www.bleepingcomputer.com/forums/t/524720/startup-repair-loop/
 
Thank You
Roger

Read other 3 answers
RELEVANCY SCORE 32.8

All of a sudden, my computer crashes every time when starting up the computer. When it gets to the "Windows" screen with the small moving dots that form the windows logo, it crashes just as they start their animation.

I've tried using Startup Repair, as well as command line repair (possibly the same thing?), but they are telling me that they aren't finding anything wrong. Also reverting to a previous state results in an error and I can't do a system restore because I have no system restore points. I was able to backup all of my most important files, thanks to that excellent guide on here which tells you how to use the "load driver" window to do it. So, I'm confident that my hard-drive is still mostly functional, since searching through it went fine, with no corrupt files or anything noticed. At first I thought the problem was something other than my hard-drive/installation, so I put my hard-drive into another computer (which was working fine) and experienced the same problem.

I read about the "repair install" option and got really excited that this might fix my problem. However, I read that you can only do it while logged in (which, again, I cannot do) and this was confirmed when I tried to do it anyway. This sounds like the perfect option for me, but I can't get the computer to let me log in, whether in safe mode or not.

Does anyone have any other ideas about what I can do? I'd really like to avoid doing a fresh install of Windows 7, if at al... Read more

A:Windows 7 crashes on startup. Can't restore, repair or repair install

Have you tried running a sfc\ scannow from command prompt?

Read other 9 answers
RELEVANCY SCORE 32.8

windows update was canceled (purposely by teen) and now computer starts in repair mode.  We selected repair and message says could not be repaired and shuts down.  In recovery tools - tried to load to last known working version and no restore point is available.  Disks did not come with this computer (Dell Inspiron 1545).  Any help would be appreciated.

A:Windows 7 update was canceled boots to repair screen can't repair

You could try going into safe mode, hit F8 during boot up.  Not real sure but I would then go to windows update, it may see the bad load.  It is worth a try!
 
Phil

Read other 48 answers
RELEVANCY SCORE 32.8

I took delivery of a new (and expensive!) PC in January but last week it started giving me constant and varied errors.

The isssues range from Blue screen, black screen, failing to load windows, startup repair needed often, system restore needed often, and when it does load windows there are various error messages.
System info:
Intel Core i5 2500K
Win 7 Home Premium 64bit
Original OS installed on the system, an OEM version
PC just a few weeks old

Any help and guidance is much appreciated...

A:BSOD, Startup Repair, System Repair and other errors on nearlly new PC

These crashes were caused by memory corruption/exception (probably a driver).
Please run these two tests to verify your memory and find which driver is causing the problem.

If you are overclocking anything reset to default before running these tests.
In other words STOP!!!

If you have Raid > update its Driver.
Memtest.





Quote:
*Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Memtest86+ - Advanced Memory Diagnostic Tool

*Boot from the CD, and leave it running for at least 5 or 6 passes.

Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot.

Test the sticks individually, and if you find a good one, test it in all slots.

Any errors are indicative of a memory problem.

If a known good stick fails in a motherboard slot it is probably the slot.



RAM - Test with Memtest86+

Driver verifier






Quote:
Using Driver Verifier is an iffy proposition. Most times it'll crash and it'll tell you what the driver is. But sometimes it'll crash and won't tell you the driver. Other times it'll crash before you can log in to Windows. If you can't get to Safe Mode, then you'll have to resort to offline editing of the registry to disable Driver Verifier.

So, I'd suggest that you first backup your stuff and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you c... Read more

Read other 9 answers
RELEVANCY SCORE 32.8

(first, I posted this on windows7forums two weeks ago, and no one replied. I'm not sure why)

Hello. My friend recently encountered the error "Disk read error occurred."

It seems to be because her MBR is damaged, according to other forums I've read, and a partition recovery program that listed her MBR partition as damaged.

When I plug in her drive, the partition that holds her Windows 7-64 OS is absent(the computer hers interacts with is also Win7-64)

Her recovery partition on that drive seems fine, however. Is there any way I can copy that partition from her drive over to a blank drive that I have, and use that to repair her other drive? Or is there a way to recover her damaged drive? I'm not too good with this kind of thing.

If anyone knows the best solution for fixing this without having to wipe the inaccessible main partition, that would help a ton.

A:Advanced boot with repair partition does not show repair option.

  
Quote: Originally Posted by SuperTechyCow


(first, I posted this on windows7forums two weeks ago, and no one replied. I'm not sure why)

Hello. My friend recently encountered the error "Disk read error occurred."

It seems to be because her MBR is damaged, according to other forums I've read, and a partition recovery program that listed her MBR partition as damaged.

When I plug in her drive, the partition that holds her Windows 7-64 OS is absent(the computer hers interacts with is also Win7-64)

Her recovery partition on that drive seems fine, however. Is there any way I can copy that partition from her drive over to a blank drive that I have, and use that to repair her other drive? Or is there a way to recover her damaged drive? I'm not too good with this kind of thing.

If anyone knows the best solution for fixing this without having to wipe the inaccessible main partition, that would help a ton.


Visit the following site;

MBR - Restore Windows 7 Master Boot Record

HTH

Read other 6 answers
RELEVANCY SCORE 32.8

Hi,

I am unable to start up my laptop (Windows 7 Home Premium). TOSHIBA Satellite C660-1J6
It is stuck in a loop of 'attempting to repair this computer', which is unsuccessful and restarts.
There are no restore points to use.
I have received the BSOD which disappears quickly during startup.
I am able to start up in Safe Mode - however when I get to the login screen, the mouse and keyboard do not work.

I would highly appreciate any help or advice with this.
I am happy to reinstall windows as I have everything backed up. However I am unsure how to do so as I do not have a CD.

Kind regards

A:Startup Repair- windows cannot repair; Stuck in restart loop

Firstly, a Windows 7 install disc is a dvd, not a cd.

You would have to find a working PC to download a Windows 7 Home Premium Service Pack 1 Iso File, either 32 or 64 bit, let`s assume you need 64 Bit.

After you have downloaded the iso file you have to burn it to a dvd at no faster then x4 speed. So the PC has to have a dvd burner and you`s need a blank dvd.

Everything you need is in the following links.

https://www.heidoc.net/joomla/techno...-download-tool

Free ISO Burner

Clean Install Windows 7

You can also use a usb stick to put the iso file on using Rufus. The usb stick must be at least 4 GB in size.

https://rufus.akeo.ie/

You must also have a readable key on your COA to activate windows after you install it.

You will also have to install at least your network/ethernet drivers to get online. Then get your other drivers, and run Windows Update, which will take a long time, sometimes 24 hours.

Have more questions, just ask

Read other 2 answers
RELEVANCY SCORE 32.8

on the 20th i turned my PC on i had been playing left 4 dead 2

and minecraft, the latter of which needing an update, and i

think dungeon defenders and frozen synapse had updated

themselves through steam, i then turned it off. when i came

back to it a few hours later it finished loaded windows but

before it came up with the accout login screen it blue

screened. the computer then automatically re-started and

launched startup repair, which failed. i then tried rebooting

pressing F8 did the startup repair manually, this time writing

down the details:
Problem Event name: startup repair V2
Problem signature 1: Manual repair
Problem signature 2: 6.0.6001.18000.6.1.7600.16385
Problem signature 3: 0
Problem signature 4: 65537
Problem signature 5: unknown
Problem signature 6: OS version mismatch
Problem signature 7: 0
Problem signature 8: 0
Problem signature 9: unkown
Problem signature 10: 1168
OS version: 6.0.6001.2.1.0.256.1
Locale ID: 1033

after trying this a few times and getting now joy i tried to

boot from last known good configuration, which led to the same

result- the blue screen at the same point. i have been able to

get in via safe mode and tried a system restore to the 17th,

which while it did complete the system restore, did nothing to

help the problem. i then tried not telling the system to

automatically reboot on crashing and wrote down what was on

the blue screen:

Bad_System_config_info

Technical info:
*** STOP: 0x00000074
(0x000000000... Read more

A:computer won't start, startup repair can't repair os version mismatch,

Hi and welcome to TSF this is about your error code
Bug Check 0x74: BAD_SYSTEM_CONFIG_INFO
The BAD_SYSTEM_CONFIG_INFO bug check has a value of 0x00000074. This bug check indicates that there is an error in the registry.

Parameters
The following parameters appear on the blue screen.

Parameter Description
1 Reserved
2 Reserved
3 Reserved
4 The NT status code (if it is available)


Cause
The BAD_SYSTEM_CONFIG_INFO bug check occurs if the SYSTEM hive is corrupt. However, this corruption is unlikely, because the boot loader, known as NT Loader (NTLDR) in versions of Windows prior to Vista, checks a hive for corruption when it loads the hive.

This bug check can also occur if some critical registry keys and values are missing. Thee keys and values might be missing if a user manually edited the registry.

Resolving the Problem
Try restarting the computer by selecting "last known good configuration" in the boot options.

If the restart does not fix the problem, the registry damage is too extensive. You must reinstall the OS or use the Emergency Repair Disk (ERD) that you previously created by using the Windows Backup tool.

Read other 5 answers
RELEVANCY SCORE 32.8

Hello, I recently got hit by an aggressive trojan that started with disabling my sound, and crippling my internet connection to finally causing my windows XP to stop booting correctly. It would just freeze moments after the desktop loaded, becoming completely unresponsive.

I tried to do an OS repair but that too failed. Repair was unusually slow then ground to a halt at the 29 minute mark (Performing Configuration Stage) with some sort of +COM failure (sorry forgot to write down the exact details). Repair setup is not able to go beyond that point, so I restart the process. Same thing happens, repair gets stuck at the same point, and now I can't boot up XP at all because it goes straight into repair.

Is there anything I can do to save this installation? A reformat and reconfiguration of my PC takes days to do and I'm short on time.

A:XP repair has failed and computer is stuck in a reboot-repair loop

I doubt there is anything you can do at this point to avoid a full wipe and reinstall. You can run off a live linux version if you need to get work done before you get around to actually reinstalling XP and configuring your computer, but your XP applications will obviously not run in such a setup.

Read other 7 answers