Over 1 million tech questions and answers.

Solved: no internet through switch (Netgear router Netgear switch)

Q: Solved: no internet through switch (Netgear router Netgear switch)

Good Evening
hope someone can help

i have a netgear router dg834gt and netgear switch gs608

2 computers connected direct to router work fine (using vista!)

yet 4 computers through switch have no internet access!! (using xp)

switch is connected via Cat5E cable to router
have tried everything i can think, with exceptions of upgrading firmware!

any help would be greatly recieved! (am having to make do with dongle!)

Cheers

RELEVANCY SCORE 200
Preferred Solution: Solved: no internet through switch (Netgear router Netgear switch)

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: Solved: no internet through switch (Netgear router Netgear switch)

Read other 13 answers
RELEVANCY SCORE 125.2

Hi everyone,

Hi, I'm a sorta newbie/intermediate. I don't have professional networking experience. I'm even a little unsure of subnet masks.

I hope my newbie questions won't be too irritating.

A local charity wants to keep costs low by separating out their office computers from the student computers and also a satellite charity in the same building. That makes effectively three separate networks. Right now they have one simple 16 port switch on which all the machines are connected. Both the office computers and the dependent (rather smaller) charity have sensitive info on the computers and the charity boss is adamant that he want the networks unable to see each other so that at least his office computers are in a walled garden, so to speak. There's no real server just a shared folder on one of the desktops (only 3 computers in the main office).

Rather than a real physical separation, which would expensively entail 3 separate internet connections, I was thinking to do this with vlans. Am I on the right track?

Presumably I would configure 3 vlans with different subnets. How might this work with the (rather old) consumer netgear broadband adsl router?

For example, presumably the netgear would have its DHCP server switched off. Then presumably the managed switch would hand out the correct ip addresses for each vlan with its own dhcp server. Is that right? I am supposing that each vlan would have a different subnet, but maybe this isn't necess... Read more

A:one netgear router/modem and a managed switch for this...?

Read other 9 answers
RELEVANCY SCORE 123.6

Hi Guys,

I'm relatively new to this sort of thing and need some help, please.

I have two personal PC's and two laptops from work + a Netgear NAS NV+ that I wish to link up for: 1. backing up my work files, 2. editing photographs and videos, and 3. personal use of MS Office.

I have broadband into the house and get the internet without problems on any of the computers.

The NETOPIA 3397G is a modem router with only four LAN connections.
The NAS NV+ requires an extra connection as does one of my printers.

I have bought a Netgear GS-605 1GB switch.

I connected the switch to the modem router using Cat 6 cable - straight through type. Unfortunately, the switch doesn't appear to recognise the router as the LED is on amber.

I can connect the PCs and the NAS NV+ to the switch and make a fully working network but if I connect up to the modem/router I am unable to get the Internet.

Question 1. Should I be using a cross-over cable for the link between modem and the switch?

Question 2. As the GS-605 is just a switch, shouldn't the link to the modem-router just work, without any configuration changes to the router?

Any ideas for solving this problem would be greatly appreciated.

Phyllis
 

A:Netgear GS-605 1GB switch and a Netopia 3397G modem router

bump
 

Read other 2 answers
RELEVANCY SCORE 118.4

Hi all !

Quick Question re: 24 Port Unmanaged Netgear Switch

Seems that there are two Amber lights showing on the LEDs others are Green

Are the Amber LEDs indicating a slower speed?

thanks
 

A:Solved: Netgear Switch

Incase anyone was interested

Green = Full Speed in this case 1Gb
Amber = Half Speed in this case 100Mb
None = Slow Speed in this case 10Mb
 

Read other 1 answers
RELEVANCY SCORE 117.2

Hi all....

1. Can i put a Netgear FVS318 (VPN-Firewall) behind a Cisco E3000 (Wireless router), and the Netgear act as a switch for my local LAN...

Thank you in advance
 

A:Solved: Netgear FVS318 as a switch

Yes.

JohnWill's procedure (Aug. 30, 2008) for configuring a secondary router as a switch and, optionally, wireless access point follows.

Connecting two (or more) SOHO broadband routers together.

Note: The "primary" router can be an actual router, a software gateway like Microsoft Internet Connection Sharing, or a server connection that has the capability to supply more than one IP address using DHCP server capability. No changes are made to the primary "router" configuration.

Configure the IP address of the secondary router(s) to be in the same subnet as the primary router, but out of the range of the DHCP server in the primary router. For instance DHCP server addresses 192.168.0.2 through 192.168.0.100, I'd assign the secondary router 192.168.0.254 as it's IP address, 192.168.0.253 for another router, etc.

Note: Do this first, as you will have to reboot the computer to connect to the router again for the remaining changes.

Disable the DHCP server in the secondary router.

Setup the wireless section just the way you would if it was the primary router, channels, encryption, etc.

Connect from the primary router's LAN port to one of the LAN ports on the secondary router. If there is no uplink port and neither of the routers have auto-sensing ports, use a cross-over cable. [You will not need a cross-over cable if one of the "routers" is a computer.] Leave the WAN port unconnected!

This procedure bypasses the routing functi... Read more

Read other 3 answers
RELEVANCY SCORE 109.2

Recently my school tripped a circuit breaker and possibly caused the death of my 5-6 year old netgear 16 port ethernet fast switch. It no longer has power. Since then I purchased a Netgear Prosafe 10/100 switch model FS 116 and installed it as per the directions. I have some solid green lights and some blinking green lights. The port that connects to the modem has a solid blinking light. I can get an internet connection directly from the DSL line and from the modem, but when I connect the modem to the switch there is no internet connection on any of my network stations. The switch does work fine on a different network across the street. Any ideas? I need to get my network up and running again soon!!!! Thank you.
 

A:new netgear switch

Isn't there a router or firewall in the mix somewhere?
 

Read other 2 answers
RELEVANCY SCORE 108

I have an old, old Netgear 814v2 that I'd like to use as a switch to, in effect, extend my wireless range and allow other old hardware that is NOT WPA-capable to connect to my network. From what I've read, it ought to be fairly easy: disable DHCP on the Netgear, and connect the Netgear to the router via a LAN port not the WAN port. This should, I gather, convert the former router to a simple switch.

Having done this: if I connect to the Netgear-turned-switch via a LAN port (cable) everything works fine (the computer gets valid IP's, subnet mask, DHCP server and DNS server IPs). Great! It's a switch!

But if I connect via wireless it gets an oddball IP address out of range of the normal IP's for a client computer, and no default Gateway or DNS server IP's. Which is to say, hardwired network connection through the Netgear-turned-switch works fine; wireless works not at all.

Why would the Netgear-turned-switch fail to pass through for wireless, and work just fine for wired? What am I missing?

(For those who are concerned, if I get this to work, I'll provide security on the Netgear by specifying MAC addresses that can connect. Sometimes folks get upset by the open security implied and it seems to distract from the original question.)

Thanks to all who can help!

S
 

A:Netgear 814v2 as a switch

Why not just assign a static IP on the switch?
 

Read other 3 answers
RELEVANCY SCORE 106.8

Hi All,

This is driving me crazy at the minute, so I thought I would throw it out to the experts to try and get my sanity back! Here goes...

I have Sky BB (dlink router) and I have been successfully using 4 comtrend homeplugs to share my connection to a spiderbox, sky HD box and HP officejet network printer. I recently had my electricity supplier changing a meter and after he went I found that 2 of the homeplugs had fried - I know they're temperamental so I took it on the chin.

Anyway I have now decided to go a different route and I purchased a Vonets wifi bridge, which works well. My question is this - I have an old Netgear DG834G router and I would like to use this as a network switch so that I can plug my bridge into one of the ethernet ports and draw off from 2 of the other 3 ports to feed my printer and Sky HD box.

I plugged the vonets into port 1 and then a cable to both my printer and my sky box and nothing - then I went into my netgears homepage and disabled DHCP, and hey presto I got a connection on my sky box. I assumed that was that until I tried to print and the printer was not available. I have tried loads of things since - static IP on the printer (I usually have it static anyway as my work laptop doesn't like it otherwise), manually configuring the network on my sky box, changing some of the settings in my netgear router but I cannot get it working. I tried changing the IP adresses on both my printer and sky box to the same as the vonets, ... Read more

Read other answers
RELEVANCY SCORE 106.8

Hi All,

I would be extremely grateful to anyone who can solve this problem for me...

How is it possible to configure 2 VLANs to communicate with each other on the same switch? I have managed to create 2 VLANS and they both work (and can access the internet), but they can't communicate with each other.

VLAN1 has an IP range starting 10.4.160 and VLAN2 has an IP range starting 10.6.192.

Is it VLAN routing that I'm looking for? Are there any Netgear switch experts out there that can help me set this up? My switch is Netgear GSM7328FS.

Thanks in advance
Nick
 

A:VLAN Routing (Netgear Switch)

To allow routing between VLANs on the same switch, you need a layer 3 switch, which you have. I've never configured one of those. The only Netgear switches I've configured are the web managed ones which are layer 2 only but have configured other layer 3 switches. Basically, you need to create a VLAN interface and assign an IP address to it. By default when the switch has multiple VLAN interfaces with IP addresses, it will route between them without needing to have any static route entries or the use of routing protocols. It is known as locally connected. With the connected clients on both subnets, you would make the default gateway the IP address of the switch on that respective subnet/VLAN.
 

Read other 1 answers
RELEVANCY SCORE 106.8

I just bought the switch so I can have more ports at my desk for wired Ethernet. Is port #5 from the router and ports #1 through #4 go to the various computers?

A:ports on a Netgear GS105 switch

It really makes no difference; I would normally do it the opposite from you (Port #1 from router) but electronically it's the same.

Read other 2 answers
RELEVANCY SCORE 106.8

What is the advantage of getting a Netgear smart switch vs. a regular Netgear switch.
Thanks!
 

A:Netgear smart switch vs. regular.

Read other 12 answers
RELEVANCY SCORE 106.8

I have two computers connected to my Ntl Cable/DSL modem (Broadcom 440x 10/100 integrated controller), and external modem, through a Netgear switch (FS605 10/100 Platinum switch). The PCs are both OS Windows XP. The problem is that when I go into 'Network Connections' on the first machine, it only shows the LAN connection from it to the Modem, and no LAN network to another computer, and the other computer shows the LAN network, and says it is connected, yet when I go into Internet Explorer it says: 'This page is not available offline', and I can't use the browser. Is it something to do with the switch? Do I need a router? Please help. This has been driving me crazy, as I want to play online games on the computer upstairs but only the one downstairs is getting a proper internet connection! HELP!

( i have NICs in both PCs, so it can't be to do with that.)
 

A:Netgear Switch Networking Problem

Read other 11 answers
RELEVANCY SCORE 106.8

Hi all,

I am trying to setup a DrayTek firewall (DrayTek Vigor 2830) with my Netgear 24port Managed Switch (Netgear GS724TS).

The DrayTek works fine when plugged directly into a PC however once plugged into the switch the computers connected cannot seem to get an IP even when setting statically.

I have been told things like multicast need to be off for the data to translate this is off on my settings, I must be missing a setting? Anyone got any suggestions?

Thank-you,

A:DrayTek and Netgear Managed Switch

Are you using the firewall as a DHCP server that hands out addresses to the PC's connected to the switch? I'm not familiar with either of these products, but if the switch supports VLANs, make sure that all ports are on the same VLAN.

Read other 9 answers
RELEVANCY SCORE 105.6

Hello,

3 years ago I purchased a Netgear GS608 V.2 8-port switch under the impression that if I connected it to a Cable Modem, it would allow me to connect multiple computers to the Internet. After trying to connect multiple computers and failing, I did some research and found out what I needed was a Router, not a Switch. However, I kept the switch and never ended up buying a router, because in reality I rarely need to connect more than one computer at a time and of all the devices I'd imagined I'd be connecting, only an ether printer ever materialized. I should have done research before my purchase and if I still wanted a switch bought the 5-port, but as I said I was thinking big .
The reason I am posting is that I am going off to college next fall and had a few questions.

1.) The college specifically prohibits Routers, Hubs, and Smart/Intelligent Switches. Is the Switch I bought considered either of these? And will the college know if I connect a router, hub, or switch without coming into my dorm room and seeing it?

2.) All of the dorm rooms have ether ports in them, will I be able to connect the switch to the ether port and use multiple computers, or will I have to connect the switch to a router which is connected to the ether port?

3.) Although more than one computer cannot connect to the switch at one time and go online, other devices like ether printers are able to print from my computer through the switch. Will all other devices that donít go on the... Read more

A:Netgear GS608 V.2 8-Port Switch Questions

1) No, I don't believe that your switch is one of those. If you connect a router/hub/switch (which, by the way, are usually lumped together into a super-device nowadays, that often also has Wi-Fi), they may or may not be able to tell. On one hand, they can tell how many computers are online (so they would notice if that number exceeded the number of dorms), and potentially how many computers are in a room (depending on their wiring). However, if you don't connect to the wall (you connect to some Wi-Fi network), it won't matter, as a Wi-Fi network can have unlimited computers connected to it at once without the use of a router.

2) It depends on what you want to do. If you want to "network" the computers, so that their data can be accessed from each other, I think your switch will do. However, if you want to connect them to the Internet, you will need to connect to a router. If you must, you should probably use one of those "super-devices" that is a switch with a built-in router (usually sold, annoyingly, as just a "router"). But those are prohibited anyway ("smart switches").

3) Yes, as the switch provides networking between devices attached to it, but not Internet access.
 

Read other 3 answers
RELEVANCY SCORE 104.4

Am a new Networking BEE I had built a small network of 20 systems at my office and there I had connected a switch and router.

All the switch ports have been covered by all the systems and one port is given to the router
switch(20)----router(LAN)
|
|
|
HUB(8ports)

And also I connected a HUB to the switch ..

It works fine for my internet connections to all the systems but how do i make authentication of passwords and username to my network systems from one server which I use server 2003 at one system

let me know the detailed step by step procedure to build.........

I would feel very happy If at all any Suggestions for me to make my Business grow.....

As early as possible ................

Thanks in Advance

Smiles....[][]
 

A:Connection of Router to Switch and also a Hub to Switch - N/W systems internet share

>>I use server 2003 at one system

you need to enable Network Login, but that requires that win2003 have

a domain controller
a DHCP service
and a DNS service.
the Domain Controller is just another name for LDAP and it becomes the control point
for all systems.

get some books on Configuring Win2003 Server
 

Read other 4 answers
RELEVANCY SCORE 104.4

I had been using a 6 port netgear hub and wake on lan was working just fine for all my systems including an xp and win7 system. It also worked when the win7 system was plugged into a linksys 10/100 router.

After I replaced the hub with a netgear prosave gs105 switch, my windows 7 system will not wake on lan. If I plug it back into my hub or router, it works again.

And I can dual boot this computer into ubuntu, and wol works, for both hub and switch.

One significant difference when wol doesn't work is that when the system is shutdown, the leds on the network connector on the motherboard, are not lit, nor are they lit on the switch's end. These leds are lit when it does work, and only go out when hooked to this new switch.

So this probably is something uncommon to do with power management, since I've gone through all the usual settings before to get it to work with the hub.

The only other thing that I can think of that is different with the hub, router and switch, is that the switch claims to have an auto shutdown feature (which I can't turn off) when it senses that the port is off. It's a green feature I guess.


It's an asus MB with a Atheros Communications Atheros AR8121/AR8113/AR8114 PCI-E Ethernet Controller.

Any ideas?

A:wake on lan (win7 only) stops working with new netgear switch

Quote:





Originally Posted by rocket777


...And I can dual boot this computer into ubuntu, and wol works, for both hub and switch...




So this particular system, with the same configuration (no extra connected deviecs, etc.) works with the GS105 for 'Wake on LAN', but when booted into Windows, it does not?

I just looked up the GS105, reading it's technical sheet, it does not mention any support for 'Wake on LAN', but based on what you said, we can assume it does and it works? Have you made any changes, such as port forwarding changes, to your new switch?

This would seem to suggest a Windows configuration step that is required (although you would have thought your driver settings and configuration is already correct, since it proved to work previously).

Perhaps somewhere along the line a firewall is blocking out the 'Wake on LAN' frames?

Try checking your network adapter (device manger -> network adapter properties -> advanced tab) for 'Wake on LAN'/'Wake on Magic Packet', or something like this.

Read other 5 answers
RELEVANCY SCORE 104.4

Hello TechSupport people,

I am relatively good at installing and troubleshooting smaller sized networks... I am having trouble with one of my customer's networks and I think I have the problem narrowed down. Please help me if you see any corrections or issues.

I have a customer with a FS726T switch and ~20 computers connected to this switch running DHCP assigned addresses. The switch is assigning addresses in the 10.0.0.xx range.

The customer currently has an old T1 line coming into a Cisco router, which then directs traffic to port 20 on the switch.

The problem is, we are replacing the old T1 line with a newer 50mbps cable connection. The cable company pre-configured their router with a static IP address the 68.116.xx.xx range. The Subnet is also different than the Netgear's subnet. I would like to keep the old T1 connection in place. I believe they have data that needs to go to their mainframe/backbone server at corporate.

I cannot log in to the cable modem. IT is an SMC SMCD3G with a staic IP. I tried changing my PC's IP address to the same gateway but cannot get into the cable company's modem, even using a static IP with the same gateway as the modem's gateway address. I don't want to reset the modem/router and lose the cable company's settings.

I am pretty sure for the devices to communicate, the following has to be true?:

1) Cable modem and FS726T must be on the same 10.0.0.xx IP range?
2) Cable modem and FS726T must be on the ... Read more

A:Netgear FS726T switch and SMC cable modem connection

Read other 9 answers
RELEVANCY SCORE 104.4

I have a Netgear FS605 switch connected to my Speedstream 5100 dsl modem. Two PC's, 1 XP Pro & 1 Win 2000. I am only able to access the internet on the XP system. Very confusing, if I turn I turn off or disconnect the XP system the Win 2000 system is able to access the net with no problems. I get a conflict error on the Win 2000. Any ideas?
 

A:SBC SpeedStream 5100, Netgear FS605 switch problem

Your agreement with your ISP includes only one connection (only one IP address)?
 

Read other 2 answers
RELEVANCY SCORE 103.2

Im about to purchase this
Netgear GS105 Prosafe 5 Port Gigabit Mini-Switch

But before i do, i would like to ask some questions about this item.

First, the reason im going to buy this, is that i have a ps3 in a room 50 feet away from the room with the computer and the modem and router. I can only recieve about 25 to 40% signal from my router to my ps3 and the games lag online. I was wondering if i get this gigabit mini-switch, will i loose any speed to my computer or ps3. I plan on running a cat6 line to the ps3 in the other room. I have comcast high speed internet. And another question is , can i run my computer and the ps3 at the same time with this item without any problems?
 

A:Netgear GS105 Prosafe 5 Port Gigabit Mini-Switch

Read other 6 answers
RELEVANCY SCORE 102

Need to no if I have this right

they have a dsl modem going to a Linksys router to a 24 port switch then to a little 4 port switch. sure, so then Would it be modem to router then router to any port on the big switch or is there an uplink port on the big switch it should go to? then you would hook a cat5e from one of the regular ports on the 24 port switch and run it to the uplink port on the 4 port switch need to no if the whole sequence is right. Hope someone can help, john will told me the cable would go from the big switch to the uplink on the small switch but I am wondering if I have it all right or not and wonderiing about from the router to the 24 port switch does the cable just go in a regular port in the big switch or if there is an uplink port does it go there. Hope you can understand my rambleing here. Thanks (please don't send me to a link) just need to no modem to router to regular port or uplink port on 24 port switch then from regular port on 24 port switch to uplink port on the 4 port switch. Thanks
 

A:Solved: Windows xp hookup question for modem, router, switch, to switch?

Router to uplink port on 24 port switch, and then normal port on the 24 port switch to uplink port on the second 4 port switch. An auto-MDX port on a device negates the need to worry about uplink ports for that particular cable connection.
 

Read other 3 answers
RELEVANCY SCORE 101.6

Hi Everyone.....
So, I just got Wireless Broadband hooked up in my business. I hooked the LAN to the Router and then hooked up a 16 port gigabit switch. I have three terminals coming out of it (in the bcak of the building) as well as a line running to the front of the building. At the front of the building I have the line going into another 16 port gigabit switch. I have 4 computer terminals coming out of that switch. I AM getting internet at the back of the building .....but nothing at any of the terminals after the second switch (front of the building). Can someone help?

Thanks!
 

A:Router to Switch to Switch.....No Internet at end terminals

Read other 7 answers
RELEVANCY SCORE 101.2

Hi All,

I recently put in a Netgear firewall, configured it, its running no problem. Then I setup a new Netgear N600 wireless router, configured it, gave it a static IP, connected to it, works like a charm. Thing is, when I try to access the web gui I receive nothing.. Is the Netgear firewall taking priority or something? I went directly connected to the netgear wifi router and double checked to make sure that there was no settings restricting administration from wifi users, etc.. Anyone have a similar setup ?

Thanks All
 

A:Netgear FVS318G FW & Netgear N600 wifi router Can't access webgui

You sure been busy! Have "seen" you all over this place.

Is the FVS318G router connected to the N600 router's WAN port or a LAN port?

If WAN have you changed one of the routers so that they don't both use the same LAN subnet (I didn't check each one, but they probably both default to the same).

If LAN have you disabled the N600's Dhcp server?
 

Read other 3 answers
RELEVANCY SCORE 100.8

Should be easy!....
But I cannot get my NEW Netgear N600 router to communicate with a NEW Netgear WN 3000 RP extender.

The instructions say to press the WPS button on the extender then the WPS button on the router. No WPS button exists on the router!

The instructions also I can use any wireless network manager utility to set this up. Can't find where this is in Windows 7.

The I pad has found the NETGEAR_EXT address but won't connect. And the light on the extender does no indicate teh router is communicating with it.

Thought this process would be a simple plug and play, but...frustration!

A:Netgear N600 router & Netgear WN3000 range extender

You can see the button here pal ... Netgear call it "Push 'N' Connect"

Read other 3 answers
RELEVANCY SCORE 100

to use for for data sharing between my PCs same network...  the Netgear can see its own USB HD, but will not share/show, it on my PCs.  The old Linksys worked fine before.
Hooked up old Cisco and now it does not SEE the shared/router HD to Map.
Have tried Wireless, Wired, both routers and still Windows 7 can not see to map.

Both routers SEE the USB HD but neither PC/Laptop can.
Have turned off, Firewall, no Antivirus, etc.


Is it a OS issue?  Was working on the Linksys before I switch to the Netgear,  Both PCs mapped to the Linksys USB HD.
Nothing wrong with HD as directly attached to my desktop and now sharing the desktop so can see the HD now but prefer SHARING by mapping.

Anyone?

Read other answers
RELEVANCY SCORE 99.2

Hello,
currently i use Netgear DG834G v5 router and i am unable to access the internet both wired and wireless.i used this router since november and this is the first time i have these prbs. i contacted my internet provider and they checked the line and they said that is working properly. i changed the dns servers and the problem remains unsolved!i only have access on the internet only when i restart the router and for the next 10-15mins.i used the cmd to check and it says req.timed out or received 0 % loss i dont know if there is something with the firewall. i recently changed the antivirus from norton to avira but i didnt have any prbs when i changed it.
what do u think?
thanks in advance!
 

A:Solved: Netgear router-internet connection

Read other 16 answers
RELEVANCY SCORE 98.4

Hello! Trying to get my Netgear N600 router to connect to the internet...nothing will get it to connect. Please help...I am able to follow step-by-steps to resolve this. Any ideas much appreciated...please let me know what info you need to start!
 

A:Solved: Netgear N600 router won't connect to internet

Read other 16 answers
RELEVANCY SCORE 98.4

Hi - my first post so please be kind. I have searched for a previous answer, but similar ones all seem more complex problems than mine!

I am running XP on my PC and connecting to the Internet with a Netgear 54 Mbps Wireless ADSL Modem Router DG834G v3.

Most of the time it is fine (and it also runs a second PC upstairs through the wireless network OK).

Then about once or twice a day, the Internet light goes from green to orange, flashing on and off for about 10 seconds, then off altogether for a few seconds, then flashing orange again and so on. At this point if I click on the Internet connection symbol in the bottom right hand corner of the screen (task tray?) it tells me I am connected, but with no speed, and I can't access any websites.

If I try the connection diagnostics in XP, it tells me to check the wires, turn the modem off and on again, but when that doesn't work just tells me to contact my ISP.

Each time this has happened I have tried re-booting the PC, and tried turning the power to the router/modem off for a few minutes and back on, no luck, and then eventually, for no apparent reason, the link seems to recover itself and I am back online. (This morning it took about 30 minutes)

We get our Internet through overhead telephone wires (no cable out here in the sticks) and the best speed I ever show on teh connection status screen is 2.5Mbps, but often much less.

I suppose my real question is this: Is the problem likley to bewith my Router/modem? Or is ... Read more

A:Solved: Netgear Router dropping Internet connection

Read other 6 answers
RELEVANCY SCORE 98.4

Hi All

I have a Netgear Router at home, and both my Laptop and Tablet connect to it via WiFi. Now on both the Laptop and Tablet, Internet has recently become VERY slow. I contacted my ISP and they said everything on their side is fine, so it has to be on my side...

What can cause this? I've checked for Malware but the fact that both the tablet and Laptop has slow internet points to the router. I also flushed my DNS on my laptop and booted into safemode with networking, internet still ridiculously slow...

Note, both the laptop and tablet travel with me and did connect to other networks sometimes

Any Suggestions?

Thank You
 

A:Solved: Slow Internet on PC and Tablet via Netgear Router

On the laptop what download reading do you get with Speedtest.net with an ethernet connection and with a wireless connection?

Please attach a screen shot of the Networks page (don't collapse the Radar, Connection or Signal History) of the Xirrus Wi-Fi Inspector. If you need help with that see TSG Posting a Screenshot. FWIW to take screen shots with Windows 7 or Vista I prefer to use the built-in Snipping Tool.
 

Read other 3 answers
RELEVANCY SCORE 98.4

I have a netgear router and i cant get it to connect to the internet through my comcast rca modem. i have tried the power cycle thing many times and the ipconfig/release / renew but nothing. i haven't tried the mac address thing but i need step by step instructions to do it because i am not very tech smart. Also i might not be turning my modem off all the way. the light still blinks but i am not sure how to turn it all the way off. Can anyone help?
 

A:Solved: My Netgear router wont connect to the internet.

Read other 7 answers
RELEVANCY SCORE 97.2

Heres my dilemna, I have installed a netgear wireless router for me (Win2000) and a usb wireless nic card for another pc in the house, to share my internet connection. The router seems to be configured correctly, i have a cable internet connection so my router is configured for dhcp to get ip's from the cable connection my pc runs flawlessly, i also have inplace the necessary wireless security. But my issue is the other (Win98) wireless workstation, it can see my SSID on the network and my connection is reading at 65% but it doesnt seem to see the router i have the worstation configured for dhcp from the router but for some reason they dont see eachother I dont understand why? if i run ipcofig on the win98 pc i get a apipa address instead of a dhcp ip address that my router should be pushing out just like it does for my pc??? I think im missing a major step here but i cant see it...
 

A:Solved: Regarding Netgear Wireless Router and Netgear USB Wireless nic card...

Read other 12 answers
RELEVANCY SCORE 96

Just wondered if anyone can sort a problem i have which is strange, yesterday i bought a brand new
NETGEAR DGND3700 Wireless ADSL Router-N600, Dual Band router/modem
when i installed it all it wont detect my internet ( i'm on plusnet fibre ) if that's any help, when i launch my browser and go inside the router by network genie it wont detect the internet, it keep's saying there's no dsl cable plugged into the adsl port (which it is) everything is connected up properly, ive followed all the instruction's as well, does anyone know what it could be?
 

A:Solved: Netgear N600 router/modem wont detect my internet???

Default font size is much less unpleasant on the eyes.

I've never heard of an ADSL modem or modem/router used with fiber optic. You really have some device that "translates" between the fiber and 2-wire phone cable? Why would you even want to do that?
 

Read other 1 answers
RELEVANCY SCORE 96

My internet works fine with the wire from modem directly connected into the laptop but when the wire from modem is connected to the router, I am not able to access the internet.
I tried to make my laptop (Running windows 7 64 bit os) as the router and i can easily access net on my other devices.

I thought there is a problem with my router. So I took my router to my cousins place who has the same ISP provider. And to my surprise ,my router worked perfectly there.
I cannot understand what i can do to fix my problem.
My ISP just provides me the wire , the modem is installed somewhere out. I just get the wire from the modem.

My ISP gives dynamic ip addresses. I have to login in the site portal.beamtele.com every time i connect the wire to my ethernet port of the laptop.
I took the router to my friends place sharing the same ISP with the same package. My router worked fine there.
i brought his Belkin router to my home to check. And at my place, it didnt work.
 

A:Solved: My INTERNET works fine with my modem but very slow with the router (netgear,

Read other 16 answers
RELEVANCY SCORE 91.2

Hi all,

I am new to TechSpot. Actually, I need some help setting up my wireless network at home. currently, I am using Dlink 502T DSL router for internet and trying to connect the Dlink router to Netgear wireless router WGR614 for wirelss internet connection to other PC's. Could anybody please tell me how to connect these routers. I am trying to connect Dlink with netgear but i am unable to configure the same. When i use Dlink router directly with the PC, my internet works fine but when i try to use netgear inbetween Dlink router and a PC, my internet stops working. Please suggest. I want to distribute internet to my other computer thru netgear wireless router. please help...

ndhingra
http://www.techspot.com/vb/images/icons/icon5.gif
 

A:how to configure Dlink ADSL router and Netgear Wireless router for internet distrib

Ndhingra said:



Hi all,

I am new to TechSpot. Actually, I need some help setting up my wireless network at home. currently, I am using Dlink 502T DSL router for internet and trying to connect the Dlink router to Netgear wireless router WGR614 for wirelss internet connection to other PC's. Could anybody please tell me how to connect these routers. I am trying to connect Dlink with netgear but i am unable to configure the same. When i use Dlink router directly with the PC, my internet works fine but when i try to use netgear inbetween Dlink router and a PC, my internet stops working. Please suggest. I want to distribute internet to my other computer thru netgear wireless router. please help...

ndhingra
http://www.techspot.com/vb/images/icons/icon5.gifClick to expand...


The easiest way is to run the CD that should have come with the Router, if you havent got it then you will have to configure it manually.

Full instructions can be found on the netgear website here.

Regards
 

Read other 1 answers
RELEVANCY SCORE 90

Hello,
currently i use Netgear DG834G v5 router and i am unable to access the internet both wired and wireless.i used this router since november and this is the first time i have these prbs. i contacted my internet provider and they checked the line and they said that is working properly. i changed the dns servers and the problem remains unsolved!i only have access on the internet only when i restart the router and for the next 10-15mins. i dont know if there is something with the firewall. i recently changed the antivirus from norton to avira but i didnt have any prbs when i changed it.
what do u think?
thanks in advance!
 

A:Netgear router-internet connection

closed continue here
http://forums.techguy.org/networking/925588-netgear-router-internet-connection.html
 

Read other 1 answers
RELEVANCY SCORE 90

Ok so my problem right now is that i can't connect to the internet on my other computers via wireless connection. The one i am using right now i had to plug in to the router using an ethernet cable. I have the Netgear wnr2000v3 router, and today i updated its firmware. From there on i could not use the internet and began receiving limited access from my network and it became unidentified network(was called Guardado-HP_Network). I then called some tech support from websites like crestbell and netgeartechnicalsupport they remote logged into my computer and told me that i have malware( csrss.exe) that is causing my problem and that they would charge $99.99 per computer to get rid of it and clean up my router. So i came here to see if anyone could help me and save me the burden of having to pay $100 to get the help i could get from other people.
My system specs that this computer has are:

Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Professional, Service Pack 1, 64 bit
Processor: AMD Athlon(tm) II X2 260, AMD64 Family 16 Model 6 Stepping 2
Processor Count: 2
RAM: 1790 Mb
Graphics Card: ATI Radeon HD 3200 Graphics, 256 Mb
Hard Drives: C: Total - 238372 MB, Free - 177308 MB;
Motherboard: Hewlett-Packard, 2A97
 

A:Netgear router and internet not working

anyone?
 

Read other 2 answers
RELEVANCY SCORE 90

I have two computers. The first is a laptop running Vista and connects to the internet just fine. The second is a desktop running XP. I have a network adapter on the desktop and although it DOES find my network, I cannot get it to connect to the internet. I type in the correct passkey and it just goes on trying to connect, saying that it is acquiring a network address but no connection. Please help with this issue
 

A:Cannot get one computer to log on to internet through Netgear router

Please attach a screen shot of the Networks page (don't collapse the Radar, Connection or Signal History) of the Xirrus Wi-Fi Inspector. If you need help with that see TSG Posting a Screenshot. FWIW to take screen shots with Windows 8 or 7 or Vista I prefer to use the built-in Snipping Tool.

Identify your network if it is not obvious.

Also show ...

Open a (black) Command Prompt window:
Hold the Windows logo key and press r; in the Run box type cmd and click on OK.

Type the following command:

IPCONFIG /ALL

[Note that there is no space between the slash and ALL.]

Right click in the command window and choose Select All, then hit Enter.
Paste the results in a message here.

If necessary use a text file and removable media to copy the results to a computer with internet access.
 

Read other 1 answers
RELEVANCY SCORE 90

I recently moved from one city to another, and I still have my same ISP. However, I can't get onto the Internet through my same Netgear router. I can connect to the Internet when directly connected to my modem, and I can ping my router from my laptop wirelessly, but the router won't let me onto the Internet.

I tried to modify some settings on the router itself (192.168.1.1), but I think I may have just gotten myself in deeper. It's currently setup for no security, and even with that I still can't get on. I might mention that I can't get on through the wireless router either connected or wireless.

I tried Netgear support, but they were worthless - they want $39.99 for one-time support assistance. I discovered my router was only good for 90 days of support. After that it's we'll-help-only-if-you-pay-us.

Any suggestions?
 

A:Can't login to Internet through my Netgear router

Read other 12 answers
RELEVANCY SCORE 90

I have an old netgear router that my tech support is expired on. I hooked it up to my computer, but cannot connect to the internet. Do you have any suggestions on what I might need to do to make it work?
 

A:Can't connect to internet with Netgear Router

Read other 9 answers
RELEVANCY SCORE 90

hello everyone, I'm looking for an answer to a parental question. I have a couple of boys that don't know when to get off the internet! I'm wondering how I can shut down the internet access at a certain time of the day than start it back up again. I'm using a netgear router, don't remember the model # off hand. There is two computers a nd two xboxes wired to the router. Can anyone shed some light on this problem.....telling them to get off obviously didn't work....LOL. Thanks for any help.
 

A:Blocking the Internet using a Netgear router

Are these boys yours, or someone else's kids? How old are they?
 

Read other 19 answers
RELEVANCY SCORE 90

Hello everyone,

I am trying to set my NETGEAR N150 DGN1000 .

I can connect to the router via wireless but no Internet.

Theh INTERNET PORT indicator on the router is goes to OFF mode.

Before I try this I had Internet with the same line with a different router..

I am not too sure what's wrong with this.. Could any one come up with a possible solution..

Many thanks
 

A:How to set up the Internet porton the NETGEAR router

Read other 7 answers
RELEVANCY SCORE 90

Hi

I have configured Netgear router at home. I use a neatgear wireless adapter on mylaptop to connect to my laptop and it works fine.
On my home desktop I directly connect with a Lan cord to one of the 4 ports available on the router.
Until day before yesterday its went all fine on my home desktop, but since yesterday I am not able to surf the net via IE or FF but suprisingly Bit Torrent is working fine, able to download and upload.

I did try Port Triggering but after this problem I have disabled it, but still the problem is not solved. I beleive it something related to the port config I did on the router via routerlogin.com but not sure how to correct it.

Please help.

Regards
Mits
 

A:Netgear Router - Internet not working

Reset the router to factory defaults and reconfigure it.
 

Read other 1 answers
RELEVANCY SCORE 90

Hey everyone, my name is Andre,

I've had a Netgear WPN824 v3 wired/wireless router for over a year now. Recently, the wireless intern connection goes off and on. The desktop computer that's wired to it doesn't lose connection, only wireless devices repeatedly gain and lose connection. To fix it I have to unplug the the router and plug it back in. The connection returns for about 2 minutes and then starts to go off and on again. I'm completely confused about what to do. Any ideas?

Thanks in advance
 

A:Internet randomly goes off and on (Netgear WPN 824 v3 router)

Make sure you have the latest firmware; then reset the router to factory default settings and reconfigure it.

Multiple wireless devices lose internet access at the same time? Can they still access the router (via wireless) during that time? If not, can you still detect the wireless network?
 

Read other 1 answers
RELEVANCY SCORE 89.6

I thought that I had this all figured out, but my dad just asked me a question about my setup, and I can't answer it.

The setup is like this:
[ip-phones + computers]-->[small switch]-->[managed L2 switch]-->[router]-->[modem]

I have several ip-phones and computers grouped into blocks of 8. Each set of 8 is a medley of phones/computers connected to a small switch http://www.linksys.com/servlet/Sate...nksys/Common/VisitorWrapper&lid=3681322279B34

Each of these switches, in turn, will be connected to a managed L2 switch http://www1.ca.dell.com/content/products/productdetails.aspx/pwcnt_3448p?c=ca&cs=calca1&l=en&s=biz that will create 2 VLANS: One VLAN will contain all of the phones, and the other will contain all of the computers. In turn, each VLAN will have its own router and DSL modem, thereby separating the network traffic.

I know that I can use this L2 switch to make the VLANS based on the MAC addresses of the devices. However, the smaller switches do not support 802.1q [VLANs]. Will it be a problem that the smaller switches do not support VLANs? Essentially, will this setup work to split up network traffic?

Thanks once again,
-Roger
 

A:Computer, switch, switch, router, modem

I have the same DELL switch for my phones. You PoE will not carry across the linksys switches, so that is the first problem.
Next are the computers attached to the phones? Or does each device get its own drop?

And whats this about 2 routers and modems? Thats a bit over kill!! QoS would do the trick.

I would run all the devices off the Dell and attach the computers to the Phones (most IP Phones have a passthrough port) Configure the Dell with trunk ports with the Computer VLAN passing untagged traffic making it the native VLAN. While having the phones on a Tagged VLAN(If you phones conig allows you to set the VLAN in its config great! If not you can bind the MAC to the VLAN). The you create a QoS policy giving the VoIP traffic priority!
 

Read other 3 answers
RELEVANCY SCORE 88.8

dgn2000 netgear router will not connect to internet. I reset it but got rid of the red light in the internet but now there is no light. How can i get connected to the internet.


 

A:dgn2000 netgear router will not connect to internet

That's an ADSL modem/wireless router combination unit, right? Is this your initial attempt to set it up, or was it working previously?

By reset to you mean a simple restart or do you mean a reset to factory default settings?
 

Read other 1 answers
RELEVANCY SCORE 88.8

Hi, Recently my Netgear stopped working, Stopped connecting to the internet. I woke up one day, And the internet light on the router was not on. I have tried 2 different Netgear Routers, The same Model but one is a V3 and the other is a V4, The same outcome, Both do not connect to the internet. I have a modem that was provided to me by my ISP, And that works fine and connects to the internet straight away. So I know for a fact I have not been disconected from the internet.

On the V3 Netgear DG834G, The Wireless Light comes on, The Power Light, And DSL, AND Internet Light, But it flashes orange first, Then goes green, But still no internet. On the V4, The internet light dosen't come on at all.

I've tried plugging my Router into my main phone line socket, And no luck there either.

Any help? Please.
 

A:Netgear Router DG834G - No Internet Light

have you configured the router for you account details ?

After completing the Internet connection configuration, your can test your Internet connection.
Log in to the router, then, from the Basic Settings link in the Setup menu, click the Test button. If
the NETGEAR Web site does not appear within one minute, refer to Chapter 9,
“Troubleshooting”.Click to expand...

have you tried this ?
 

Read other 2 answers