Over 1 million tech questions and answers.

Solved: Windows Update shows no updates needed on a fresh install of XP- no way!

Q: Solved: Windows Update shows no updates needed on a fresh install of XP- no way!

Just did a fresh install of Window XP. Went to Windows Update to get current and scan came back clean- nothing needed, not even sp2- NO WAY! I must need a ton of updates, patches, etc- how do I determine what I need in order to get current when MS's own scan says I don't need anything?

Any help would be appreciated!
thanks
WEBZ

RELEVANCY SCORE 200
Preferred Solution: Solved: Windows Update shows no updates needed on a fresh install of XP- no way!

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Solved: Windows Update shows no updates needed on a fresh install of XP- no way!

Read other 16 answers
RELEVANCY SCORE 84

Basically my old HDD died from bad sectors and I had to format and install Windows 7 Enterprise on a back up hdd that was flooded with useless documents from the past.

Went ahead done what I had to do and left Windows to check for updates, Steam install some games and League of Legends update.

However everything finished but Windows was still checking for updates and I noticed the svchost.exe (netsvcs one) uses about 1.5 GB out of 4 RAM. Immediately knew that this was caused by the Windows Update service that's under it.

However turning Windows Update off is never a smart thing to do and I don't have the kind of time to manually download updates.

I know that it will probably blast me with 200+ updates (has happened in the past but never used up so much RAM and finished way faster than 6 hours with all my usual post installation stuff.

Anyways some info you should probably know:
-I'm using a Wireless adapter (TP-LINK TL-WN722N) and I have read threads here that Windows Update would sometimes fail to do what it should with Wireless adapters, unfortunatelly that isn't an option at the moment.
-Resetting Windows Update manually and through Fix It doesn't work.

So first thing I'm looking at is updating the Windows Update client, please do tell if you think otherwise, or if not link me to the newest Windows update client or probbably any hotfixes that could fix the problem (never done this before and wouldn't want to mess up, so I decided to ask you guys )

An... Read more

A:Windows Update stuck on checking updates (on fresh and clean install)

Hi Qualtrox,
might be due to fact that Enterprise and Ultimate, are different versions.
If you using the Ultimate key on an Enterprise install, or visa versa, then it will hang as its failing validation.
We can check if you run this too, copy/paste the output
http://go.microsoft.com/fwlink/?LinkID=52012

Roy

Read other 6 answers
RELEVANCY SCORE 82.4

Hello,

So here is my problem, I reinstalled my windows 7 ultimate x64 using the fresh backup I did the day I bought my laptop.

So the installation was done without any issue and everything seems to be working fine apart of Windows Update. When I launch the update, Windows Update just keep looking for updates withtout finding nothing and then after a long time, it show an error msg, I got two different for the moment : 8024400a and 8024402F
I have attached the CBS logs if someone can have a look.

Thank you in advance.

Read other answers
RELEVANCY SCORE 79.6

Hello,

After viewing some great tech support on your forum today that looked like a similar problems I am having, I decided to join the site in hopes of getting the same help.

I went ahead and made a log1, log and info files via that .bat file mentioned in someone elses topic but I also read that I'm not suppose to post any of that until asked. Sooo... I'll wait. :0)

Problems? Well, Avast seems to have more more traces off the viruses I mentioned in the description however I am still unable to update any malware/spyware protection software in order to run it on this laptop; moreover I am unable to get to the windows update page to try to update the computer... the owner of this laptop said they received an update from windows about a month ago.

When I click on the windows update from my programs files, I get directed to google search instead. :0( Before running the avast(avg was installed before but stopped responding) I would get directed to a depression website when trying to type in microsoft.com

Pleaaaaaaaaaaassseee send help.

I'm on windows xp 2002 home edition service pack 3. Thank you

A:Windows updates shows google search instead, can't update any spyware,malware software, can't download/install programs...

As no logs have been posted, I am shifting this topic from the specialized HiJack This forum to the Am I Infected forum.==>PLEASE DO NOT NOW POST LOGS<== unless a log is specifically requested.

Read other 15 answers
RELEVANCY SCORE 76.4

Hi everyone, I think I've got a fairly tricky problem here.
I just finished installing Windows 7 Pro (SP1 included) x64 on my laptop. Pretty much the first thing I did was go to check for updates. This was taking forever, and upon looking at the resource monitor, it appears that svchost (you can just which services
it's hosting) was hung at %50, or one CPU core. No HDD activity to speak of, just a process spinning its wheels.
I've tried multiple troubleshooting steps, from running the Update readiness tool (Which didn't find anything wrong), resetting windows update using multiple tools, running an SFC (which said the system was in perfect condition), and of course rebooting
several times in between.
Checking the CBS log file, there are many lines reading "Failed to internally open package. [HRESULT = 0x800F0805 - CBS_E_INVALID_PACKAGE]". Windows Update appears to soldier on past that however, where it apparently reads out its last cached package
(successfully it would seem) then stop dead. When I net stop wuauserv, the log seems to mention TrustedInstaller a few times, then that's about all the interesting information I can gather.
The WindowsUpdate.log file is not terribly helpful either; just before the hang it says "PT: Synchronizing extended update info", then it lists off a ServiceId and Server URL. Nothing after that!
Any help would be greatly appreciated!

Read other answers
RELEVANCY SCORE 75.2

I just installed Windows 7 Home Premium 64 bit on an HP Envy m6 laptop. I went to check for updates due to the fact that this laptop originally had Windows 8.1. Windows updates just keeping Checking for updates with the green progress bar keeps turning and
turning. I had this problem awhile back and there is an issue with two KB files which are windows update agents but I did not write them down. Does anybody have that information?
Thanking you in advance,
Dennis Sturgill

Read other answers
RELEVANCY SCORE 75.2

FYI, I know there are a million "solutions", problems and situations regarding delays while performing Windows Updates, but this worked well for me.

Fresh install of Windows 7 x64, installed update package KB3135445, then I was able to check for updates in under 2 minutes. I did it over and over again, it never failed. Got all updating done in a little over an hour.

Read other answers
RELEVANCY SCORE 72.8

Hello All

Just done a fresh install of XP Home SP3, Installed IE8, attempted to run Windows Update - normally it wants to run an Active X which shows at the top of the page. This is not showing so cannot download updates. Would appreciate any help please.

Regards SilverSurf
 

A:Solved: Fresh Install - No Updates?

Read other 16 answers
RELEVANCY SCORE 72.4

T460p here. After I updated my Windows 10 to Fall Creator Update - Lenovo System Update Shows 11 Updates that are already installed - so it want's to install the same drivers over and over again. Probably a bug. Anyone with the same experience?

Read other answers
RELEVANCY SCORE 71.2

-Running Windows 7 Ultimate 64bit Service Pack 1

Hello there, I've just built a new computer and am having trouble installing Windows updates on my fresh install.

When I go to Windows Update, I get the following message:

--
Install new Windows Update software

To check for updates, you must first install an update for Windows Update. Your automatic updating settings will not change

To install the update, Windows update will automatically close and re-open.
--

When I click 'Install now', the window disappears and I am then confronted with the following message:

--
Windows could not search for new updates

An error occurred while checking for new updates for your computer.

Error(s) found:
Code 800F081F Windows Update encountered an unknown error.
--

Does anyone know how I can get updates to work? Is there some way that I can manually download and install this update for Windows Update?

Thank you.

A:Unable to install updates on fresh Windows 7 SP1 install

I'm guessing that your installation media already contained SP1, is that correct? Since this is a clean install my first thought is something happened during the installation process to damage or corrupt some system files. I'd try the Microsoft troubleshooter first.

Troubleshoot problems with installing updates - WindowsUpdate_dt000

If that doesn't work I'd try running the System Update Readiness Tool.

What is the System Update Readiness Tool?

If still no joy, and only because this is a very recent clean install, I'd just reinstall Windows 7 again. If the problem persists I'd start looking into the possibility of a bad installation disk, hardware issues, etc. Please post back if any of this helps or not.

Read other 9 answers
RELEVANCY SCORE 70.4

Hi Everyone, just joined.
I have just had to do a fresh install of Windows 7 Home premium 64 bit.
A question i have is: are there any methods to find where these updates are being downloaded to, so that i may keep them on a disc for the next time i need to do a fresh install, or do i have to check in installed updates and manually find and download them?

A:Fresh Install - Updates download (Windows 7 )

I'm pretty sure that there is no way to separately save the updates so I guess you will have to go the normal download route.

As an alternative to a fresh install next time why don't you make an image backup when you have the system the way you like it and restore that instead. You will then have most of your updates and installed programs in place.

Read other 5 answers
RELEVANCY SCORE 70.4

I installed all the updates last tuesday and two of them (while installed successfully ) keep popping up as needing to be installed.   This is happening when i run Secunia PSI as well .
 
The two are  Internet Explorer 11  updates 
 
KB3021952 and KB3032359 
 
 
Any ideas as to why ?
 
Thank you

A:Windows update shows two updates need to be installed but already are

Windows downloaded updates could be corrupted you can delete "C:\Windows\SoftwareDistribution" directory which holds Windows updates cache. 
Close all running programs and save open files then open Command Prompt as a administrator type sc stop wuauserv  press Enter key. Type rd /s /q  C:\Windows\SoftwareDistribution press Enter key. Type Shutdown /r /t 2 press Enter key to restart your computer and after login to Windows check and install updates if needed.

Read other 55 answers
RELEVANCY SCORE 69.6

My daughter bought this Windows 8 OEM OS HP Pavilion g6-2240sa 64bit Notebook PC around three years ago and lately it was very slow and she asked me to have a look at it. As it was three years old I decided to do a factory reset from the built in recovery option. I copied the files etc she wanted backed up onto my own PC and followed the instruction in the recovery tool. All appeared to go well and before continuing I deleted some bloatware including Norton Security which had installed even though I unchecked the box telling it not to.

I then began the Windows 8 installation bit and eventually got back on line connected to the internet and ready to begin updating the OS intending to go right through to Win 10. After checking for updates it found 198 files which I set it to install and when it was finished and I had clicked on restart all went well until it hung on the dreaded 13% while configuring updates. I found a solution to this via google but it took a long time (5hr) before it eventually started again and I could sign in. I checked and all seemed well so went back to Windows Update and this time I got 111 which installed perfectly as did the 78 files after that. I restarted the PC again and went back to Windows update where it found 2 more important updates which failed one had the error code 80070002 which I solved via the msn walk through I found on Google. The other which had the error code 80070436 and was for the HP-Other Hardware, HP Wireless Button Driver, has ... Read more

Read other answers
RELEVANCY SCORE 69.6

Hello,

I have a Toshiba laptop that will not do Windows updates. It just hangs on checking for updates. Here's what I have done.

completely wiped and reformatted hard drive
fresh install of of 2 different versions of windows 7 - Home premium - what the laptop came with, and Win 7 starter (mine), and I have the same problem with both

changed update options to check, but let me install
I've done MS fixit 50202 in aggressive mode
System Update Readiness Tool for Windows 7 (KB947821)
I've done the stop wuauserv and bits services, deleted the SoftwareDistribution folder and restarted services.

It just hangs on checking for updates - eventually all network activity stops, cpu hangs around 50% and memory at about 60%, with all that being taken up by svhost

I even checked to see if the network adapter needed newer drivers...
the machine seems to be running fine - I can get online, and can install other programs..

CBS log attached,

Thanks for your help

Read other answers
RELEVANCY SCORE 69.6

Hello, Quick recap

Thursday I reformatted my pc due to long time issues that finally piled up. I installed windows 7 home 64bit from my original legit windows 7 upgrade disc I got when windows 7 was released. I've used this disc for this before and worked fine. The install went smooth and windows activation worked perfectly right when I booted up I was able to activate no problem. I installed my drivers and enabled automatic updates. Windows went through a series of 5-10 updates installing at a time then it had one big spurt of about 120 updates. All were installing fine, but a few were failing and kept re trying during the next update.

Finally I'm at a point now where the same 9 updates keep failing. I've tried running Fix it, SFC/ Scan shows no problems. System update readiness tool installs and finishes and still The updates fail. Attached is the CBS folder.

Error(s) found:
Code 8007065E
Code 800B0100
Code 80070490

The 9 Failing updates are

KB3068708
KB3033929
KB2676562
KB2871997
KB3045999
KB2882822
KB2506014
KB3004375
KB3031432


I've read online someone suggested to reformat again, turn off automatic updates. install the Service Pack 1 from the iso from microsofts website. then manually install updates like 5 or so at a time until you're all caught up. Seems like a hassle but I'm willing to do this if this means it will solve my issue.

so I'm trying to upload the cbs.zip folder. and my .zip is 96.2mb. when I try to upload it just times out and g... Read more

A:Windows UpdateS Fail Fresh Win 7 64bit Install

Pleasefollow the WindowsUpdate Posting Instructions and postthe requested data

If thefile is too large (8MB compressed), remove the older CBSPersist cab files untilthe final file is below the limit - you can always post them separately afterzipping them. (the forum doesn't allow the upload of bare CAB files, for anumber of reasons)

Pleasealso post the C:\Windows\windowsudpate.log file

Read other 9 answers
RELEVANCY SCORE 69.6

Hi all, If I wanted to fresh install Windows 10 on my Yoga 530, could you tell me which additional programs I would need to get the different modes working again (such as tent mode and stand mode) and also get all the hotkeys working properly again?  I know where to get the appropriate drivers etc, just not quite clear on the extra few applications I would need to get it running again to perform as a Yoga should. Many Thanks

Read other answers
RELEVANCY SCORE 69.6

Hi all,
I head to this section on advise by a Moderator from the Virus/trojan/Spyware Help section.
After cleaning the machine from a rootkit I have this issue:
I removed and then reinstalled SP3 (twice) and after downoading the updates now my pc prompts me to install updates that appear to be already in the system.
The last update haunting me is KB2633952 (before it was KB981793).
After every reboot I have the yellow update icon on the toolbar (down on the left, close to the clock). If start the installation procedure it ends telling me it is impossible to install. I tried to download it directly from Microsoft download center and the result is an installation error: "update cannot be installed as a newer or same timezone has already been installed on the System".
If I search the system I find the update in these directories:
1) C:\Windows\System32\CatRoot\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}
2) C:\Windows\SoftwareDistribution\Download\be9e26e54f7a2d73396715001d0e1e17\update
3) C:\Windows\SoftwareDistribution\Download.old\be9e26e54f7a2d73396715001d0e1e17\update
4)C:\Windows\Prefetch

Please note that the system now appears to be cleared from malware.

A:[SOLVED] Windows update prompting to install updates already installed

Go to Control Panel/Date and Time make sure that your computer is in the Right time zone for your area, and the check box for automatically update for Daylight Savings time is checked. Then go to the Internet Time tab and update your time to the current time. then you can try the Update again.

Read other 8 answers
RELEVANCY SCORE 68.8

Hello, all. I built my first gaming PC last week. The build went well, but the following day, I got 2 or 3 random bsod's, mainly on start up. Updated mobo bios hoping it would solve the problem. System was stable for a couple days, then started getting bsod's again. One on start up, one after computer was idle. After another crash after booting up my PC last night, I decided to do a clean reinstall of Windows 7 (64 bit) and just start over. Got all "up to date" drivers for all components, did not install any extra programs other than Steam and Norton. Everything was running fine... until I started performing the numerous Windows Updates. Then, it started happening again. BSOD's. I have ran checks on the RAM, SSD, etc, but have come up with no issues. Must be a conflict with 1 (or more) of the windows updates/drivers? I restored from a previous point where windows was working last night, but am getting crashes again now this morning. I tried uninstalling Norton to see if that was the issue, but that did not help. I would really like to figure out what is causing this? I have already had 3 or 4 random bsod's this morning... Any help would be greatly appreciated. I have uploaded the data/reports requested in the "how to post on this thread" with this post. I am new at this, but am somewhat technically sound, and can give you any info you need to provide me with any help. Once again, thank you.
P.S.
My set up- (just in case you need it)

Windows 7 (64 bit... Read more

A:Numerous BSODs on fresh install/new build after windows updates..

Re-install Norton. It most likely is not the culprit (assuming it is up to date and the 2012 version) in your crashes and you need a security program installed on your system.

Code:
Microsoft (R) Windows Debugger Version 6.12.0002.633 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [D:\Kingston\BSODDmpFiles\breakingadam\Windows_NT6_BSOD_jcgriff2\032812-7815-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*C:\SymCache*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (8 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 7601.17727.amd64fre.win7sp1_gdr.111118-2330
Machine Name:
Kernel base = 0xfffff800`0300c000 PsLoadedModuleList = 0xfffff800`03250650
Debug session time: Wed Mar 28 09:26:19.788 2012 (UTC - 6:00)
System Uptime: 0 days 0:02:02.505
Loading Kernel Symbols
...............................................................
................................................................
...............
Loading User Symbols
Loading unloaded module list
....
*******************************************************************************
* *
* Bugcheck Analysis *
* *... Read more

Read other 1 answers
RELEVANCY SCORE 68.8

Code:
=================================
Checking System Update Readiness.
Binary Version 6.1.7601.22471
Package Version 26.0
2014-12-27 12:36

Checking Windows Servicing Packages

Checking Package Manifests and Catalogs
(f) CBS MUM Corrupt 0x800F0900 servicing\Packages\Package_2_for_KB3002885~31bf3856ad364e35~amd64~~6.1.1.2.mum Line 1:
(f) CBS Catalog Corrupt 0x800B0100 servicing\Packages\Package_2_for_KB3002885~31bf3856ad364e35~amd64~~6.1.1.2.cat
(f) CBS MUM Corrupt 0x800F0900 servicing\Packages\Package_3_for_KB3002885~31bf3856ad364e35~amd64~~6.1.1.2.mum Line 1:
(f) CBS Catalog Corrupt 0x800B0100 servicing\Packages\Package_3_for_KB3002885~31bf3856ad364e35~amd64~~6.1.1.2.cat
(f) CBS MUM Corrupt 0x800F0900 servicing\Packages\Package_40_for_KB3008627~31bf3856ad364e35~amd64~~6.1.1.0.mum Line 1:
(f) CBS Catalog Corrupt 0x800B0100 servicing\Packages\Package_40_for_KB3008627~31bf3856ad364e35~amd64~~6.1.1.0.cat
(f) CBS MUM Corrupt 0x800F0900 servicing\Packages\Package_41_for_KB3008627~31bf3856ad364e35~amd64~~6.1.1.0.mum Line 1:
(f) CBS Catalog Corrupt 0x800B0100 servicing\Packages\Package_41_for_KB3008627~31bf3856ad364e35~amd64~~6.1.1.0.cat
(f) CBS MUM Corrupt 0x800F0900 servicing\Packages\Package_42_for_KB3008627~31bf3856ad364e35~amd64~~6.1.1.0.mum Line 1:
(f) CBS Catalog Corrupt 0x800B0100 servicing\Packages\Package_42_for_KB3008627~31bf3856ad364e35~amd64~~6.1.1.0.cat
(f) CBS MUM Corrupt 0x800F0900 servicing\Packages\Package_78_for_KB3008627~31bf3856ad364e35~... Read more

A:Fresh 7 Ultimate x64 install. Windows updates failed/corrupt

scannow comes up with no errors

Read other 9 answers
RELEVANCY SCORE 68.8

I've done about 5 different clean installs this week and have attempted multiple fixes form other forums when it comes to searching for updates. The last install which I started yesterday at 7am pacific time is still going for over 24 hours, Once I registered the product key and activated windows it found a new update for the client and since then it's been searching. Any help would be appreciated. Thanks again!

-Update

Service pack 1 is already installed from the cd version that I have. After I activated windows it prompted me to download and install a windows update agent which was windows update agent 7.6.7600.320 and since then it's been searching for updates.

A:Fresh install Windows 7 64bit searching for updates over 24 hours

Hi and welcome to SevenForums
See post #2 here
Clean install
windows update

Read other 2 answers
RELEVANCY SCORE 68.8

I had to do a clean install for a user of mine and I cannot get Windows Updates to install. I've ran the torubleshooter, stopped the wuauserv service and renamed the softeware distribution folder, restarted the BITS service but it's just hung on that screen
When I check the WindowsUpdate.log I have many line like the one below for many KB's:
DtaStor WARNING: Attempted to add URL http://download.windowsupdate.com/d/msdownload/update/software/secu/2016/04/windows6.1-kb3145739-x64_b9ae7ee29555dce4d1a225fd1324176a2538178a.msu for file ua5+4pVV3OTRoiX9EyQXaiU4F4o=
when file has not been previously added to the datastore

how can I get this fixed?

Read other answers
RELEVANCY SCORE 68.8

Hello, I got moms laptop for repair, and found one problem. I can't install 6 updates, one of them is that Windows 10 one. Windows update gives me error 80070BC9. I already tried sfc /scannow, even on boot, it threw "unfixable" errors on me too.
Any help? (Windows 8.1)
Thanks!

P.S.: I tried to put CBS.log here, but I can't, don't know why.

A:Windows Update shows error 80070BC9, updates fails

Please post the KB{number} list of the updates you are trying to install.
Please upload the cbs.log file located at [windows partition]\windows\logs\cbs\ ,this log might have information about the problem + use this command
Code:
findstr /c:"[SR]" %windir%\Logs\CBS\CBS.log > "%userprofiel%\Desktop\sfcdetails.txt"


after sfc/scannow is finished.
The sfcdetails.txt file shows what sfc could not fix.

Read other 23 answers
RELEVANCY SCORE 68.4

Hi,

I've been running XP on my machine for several years and the latest reinstall went very smoothly until I updated my bios. It may be unrelated to updating my bios but this seems to be the only change I had made at the time. It prevented a lot of applications from running, from Windows Live Messenger, to various games e.t.c.

I assumed it was to do with my bios, so I pulled the battery out of the motherboard (also shorted the 3 pin switch thing). This didn't seem to make any difference.

I recently installed Windows 7 (x86) on the same hard drive and partition, expecting this to cure the problem and start fresh, however Windows 7 seems to be having a similar problem in that I get errors on Windows Update (8007065E,800B0100 and 80070003). I've tried manually installing some of the failed updates too and just get a "failed" message.

This makes me assume that it's either still a problem with the bios, or perhaps with my hard drive.

Does anyone know of any software I can use to perhaps scan for issues with the hard drive, or with the bios?

Regards,
 

A:Solved: Windows Update won't install some updates (XP or Windows 7 on same machine)

Well, after trying all the fixes available on the internet for those particular error codes to no avail, I ran Kill Disk on the partition, re-installed Windows 7 and it appears to be running smoothly, with all service packs and updates installing fine
 

Read other 1 answers
RELEVANCY SCORE 68.4

I built up a new PC before Christmas. These were the components:

Asus P8Z77-V Motherboard
Intel i5 3570K 3.4GHz
2 x G-Skill 8GB DDR3 1600Mhz
PowerColor HD 6870 1GB GDDR5 Dual DVI HDMI PCI-E Graphics Card
OCZ 120GB Agility 3 SSD

Not really used it that much and have had random crashes since built. Today, I decided to start afresh and reformatted the C drive and re-installed Windows. Although the OS installed without a hitch, at various times throughout the Windows Update process, the machine would crash a BSOD would appear.

I have attached the files as requested.

Can anyone advise me on what is the best approach to resolving this issue?

Cheers

Darren

A:Windows 7 - Fresh Install BSOD whilst applying windows updates

Hello DarrenF.

Four crashes, four different stopcodes.

Code:
BugCheck 34, {50853, fffff8800317e738, fffff8800317df90, fffff80002cd1eee}

Probably caused by : ntkrnlmp.exe ( nt!ExAcquireResourceSharedLite+4e )

Followup: MachineOwner
---------
BugCheck 1E, {ffffffffc0000005, fffff80002c8e284, 0, ffffffffffffffff}

Probably caused by : ntkrnlmp.exe ( nt!SwapContext_PatchXRstor+0 )

Followup: MachineOwner
---------
BugCheck 1A, {31, fffffa800ef4fac0, fffff8800e0ed000, fffff8a00a7584e0}

Probably caused by : ntkrnlmp.exe ( nt! ?? ::NNGAKEGL::`string'+7271 )

Followup: MachineOwner
---------
BugCheck 3B, {c0000005, fffff960000f6b32, fffff8800785ffa0, 0}

Probably caused by : win32k.sys ( win32k!FreeObject+12 )

Followup: MachineOwner
---------
Whereas ntkrnlmp.exe and win32k.sys, none of them cannot be the real probable cause of a crash. Do these tests, one by one.

Test your RAM modules for possible errors.
How to Test and Diagnose RAM Issues with Memtest86+
Run memtest for at least 8 passes, preferably overnight.

Stress test the Graphics Card using Furmark.
Video Card - Stress Test with Furmark

Stress test the CPU.
Hardware - Stress Test With Prime95

Enable Driver Verifier to monitor the drivers.
Driver Verifier - Enable and Disable
Run Driver Verifier for 24 hours or the occurrence of the next crash, whichever is earlier.

Let us know the results, with the subsequent crash dumps, if any.

Read other 6 answers
RELEVANCY SCORE 68

I'm currently running the initial version of Windows 10 and i'm planning to do the november upgrade release soon. However, anybody has an idea if your system will be faster when you do a clean install with the november update instead of an upgrade? (similar to the speed difference when installing the clean initial version instead of upgrading from W7)?

A:Windows 10 November update, fresh install or update

Originally Posted by moorken


I'm currently running the initial version of Windows 10 and i'm planning to do the november upgrade release soon. However, anybody has an idea if your system will be faster when you do a clean install with the november update instead of an upgrade? (similar to the speed difference when installing the clean initial version instead of upgrading from W7)?



Hi.
The difference of W7 > W10 upgrade vs. W10 clean install is substantial.
The difference of W10 10240 > W10 1511 upgrade vs. clean install is pretty negligible, IMO.

Read other 0 answers
RELEVANCY SCORE 68

Hello all,

My computer recently caught a virus and I had to reformat my computer. I have reformatted this machine before without a single problem.

First problems appeared after the initial re-format and install. Installing various games and drivers would wind up alerting me that various dll files were missing. After following a 10? step guide to troubleshoot these errors nothing worked and the final step was to conduct another fresh install of windows.

I was also considering that maybe my hard drive was going bad so I did a fresh install on my second hard drive and the same problems occurred.

I did however, manage to get one of the installs to remain relatively stable, but it still has the same problems.

And finally, I purchased a brand new SSD (samsung 830 series) and did a new fresh install to it. Everything seemed to go fine until I began running windows updates (after getting Security essentials installed and my video drivers). Windows updates got hung up on the on screen in application install screen in the middle of approximately 130 updates. I then clicked the stop installation button and nothing happened. The updates screen would not change. I left it alone for awhile and came back. Still nothing. I then told the computer to restart. It then proceeded to hang on the shutdown screen. (i let this remain overnight hoping it would shut down) It did not. I was forced to hard reset the system and now the same issue is happening after installing microsofts fix it app... Read more

A:Fresh windows 7 install, windows updates fails and other problems

Work through these Troubleshooting Steps for Windows 7

If you didn't follow the Best Practices for Clean Reinstall after resetting BIOS to defaults, setting SATA controller to AHCI, unplugging all other HD's and peripherals.

Drivers are handled differently in Win7 than before so make sure to read and understand that part. If you changed out any from what Win7 wants then I would do it over. If you're running with the installer chipset then you can try the one from the Support Downloads webpage for your model PC or mobo.

As you work through the Troubleshooting steps post back results as there may be other steps suggested.

Read other 1 answers
RELEVANCY SCORE 68

Hi, I have just done a fresh install of windows xp, I got an automatic update first of all.

I have installed avg free and office 2003, and the drivers for my computer, however xp update just doesn't load, I have installed the required things for it, but no luck. I just press on express, and the green bar will just move for ages.

Same happens with custom.

Any ideas?
 

A:Solved: Fresh Install Can't use microsoft update

Read other 9 answers
RELEVANCY SCORE 67.2

I'm fairly new with computers and recently reinstalled XP Professional on one of my computers and it shows no information for my adapter in display properties. My resolution is fixed at 640x480 and 4bit color. When I look under the monitor tab, it shows default monitor and the properties button is faded so I can't change the monitor. I'm not sure what i'm supposed to do...

Any help with this would be appreciated.

Thanks You!

Elusive

A:Fresh Xp Install (shows No Adapter)

You need to install the video driver for your computer. What it the make/model of your computer? Do you know if you have a video card or onboard?
Mark

Read other 10 answers
RELEVANCY SCORE 67.2

I installed a fresh Windows 7 SP1 64-bit on my Dell Precision M6400 yesterday from a Dell OEM disk I've used before without any problems. At 2PM the disk was installed and I went to Update knowing there will be hundreds of Updates. All afternoon and evening it was "Checking for Updates. I left it on and went to sleep at 10PM, which is 8 hours of checking. I figured overnight it would finish.
 
I was wrong. Checked it at 7AM and it had turned off. Don't know why? So I put it back in the Update mode and hope it will finish today...this morning. The only change I can see after all those hours is Windows does say Activated.
 
This seems like a very long time. Should I reinstall Windows 7 if it doesn't update today? 
 
Lately on other laptops with Windows 7 the Updates have been slow, very slow. 

A:Windows 7 Fresh Install Won't Update? Help

Download the April 2016 rollup package as shown on this page. You need IE to download from the catalog. This will get you all updates and improvements since SP1. After the install make sure you have IE11 and .NET 4.61. If not you can get IE11 here and .NET 4.61 here. 
 
Download and install the June 2016 rollup. Make sure you have the prerequisite KB3020369 as shown on the page. 
 
Reboot after each and install. Then check again for any upadates.

Read other 0 answers
RELEVANCY SCORE 66.4

Hi

Anybody doing fresh install of Windows 7 these days, its a pain to install windows 7 updates. My Windows update uses close to 5 GB of RAM in my 6GB system. Granted, I was able to fix it with the Memory Leak Fix update available online. It just get old if you are trying to install windows 7 in a few systems.

Also, you can never know what happens with the Windows 7 Updates, it ends up sometimes checking for updates or installing takes forever and i have to resort to multiple manual fixes posted online to correct this.

I thought i would just write here lol, its frusturating.
 

A:Windows 7 fresh install update nightmare

That is probably because you have an Iso with Windows 7 that was last updated in 2009 xD
Try to get an Iso with major of updates included. For example I have one with all updates till September this year.
Sorry Horrible english
 

Read other 5 answers
RELEVANCY SCORE 66.4

The error code is CODE 800B0100
Two different updates have failed

A:Windows update fail fresh install

CheckSUR shows these problems...

Code:
Unavailable repair files:
winsxs\manifests\amd64_microsoft-windows-ncrypt-dll_31bf3856ad364e35_6.1.7601.18489_none_bbbd9451086ff7a8.manifest
winsxs\manifests\amd64_microsoft-windows-security-schannel_31bf3856ad364e35_6.1.7601.18489_none_7ff589cd6c16bfc6.manifest
winsxs\manifests\amd64_microsoft-windows-security-ntlm_31bf3856ad364e35_6.1.7601.18489_none_da922b92795eac1d.manifest
winsxs\manifests\amd64_microsoft-windows-security-digest_31bf3856ad364e35_6.1.7601.18489_none_98ac89d69388fcce.manifest
winsxs\manifests\x86_microsoft-windows-ncrypt-dll_31bf3856ad364e35_6.1.7601.18489_none_5f9ef8cd50128672.manifest
winsxs\manifests\wow64_microsoft-windows-security-schannel_31bf3856ad364e35_6.1.7601.18489_none_8a4a341fa07781c1.manifest
winsxs\manifests\wow64_microsoft-windows-security-ntlm_31bf3856ad364e35_6.1.7601.18489_none_e4e6d5e4adbf6e18.manifest
winsxs\manifests\wow64_microsoft-windows-security-digest_31bf3856ad364e35_6.1.7601.18489_none_a3013428c7e9bec9.manifest
winsxs\manifests\amd64_microsoft-windows-lsa.resources_31bf3856ad364e35_6.1.7601.18489_en-us_e4871310ad6f402c.manifest
servicing\packages\Package_121_for_KB2984972~31bf3856ad364e35~amd64~~6.1.1.4.mum
servicing\packages\Package_121_for_KB2984972~31bf3856ad364e35~amd64~~6.1.1.4.mum
servicing\packages\Package_122_for_KB2984972~31bf3856ad364e35~amd64~~6.1.1.4.mum
servicing\packages\Package_122_for_KB2984972~31bf3856ad364e35~amd64~~6.1.1.4.mum
servicing\packages\Packag... Read more

Read other 6 answers
RELEVANCY SCORE 66.4

My PC:
 
Mobo: MSI A75MA-G55
CPU/GPU: AMD A8-3850  (an APU)
RAM: 8 GB
OS: W7 SP1 Home Premium X64 OEM
HDD: 1 TB spinning rust
 
Computer is self built, i.e., I put it together from parts several years ago, (shortly after the APU came out)
 
I recently put together a new PC for myself, and my wife wants the PC described above. I reinstalled W7, from the OEM disk, used the mobo driver CD to get the drivers. Works fine; Graphics, NIC, etc.I'm using it now. Downloaded Avira Free AV, installed the Palemoon web browser.
 
Went the Windows updates in the control panel, said I needed to update the updater, so I did. rebooted the computer, and went back to WU it showed checked for updates: Never, last updated Never.  Looking at installed updates shows that the updater was indeed updated.  Seemed odd, but I click check for updates, and it was still checking after 2 hours.  This isn't normal W7 behaviour. I closed the update window and rebooted.
 
Tried a MS W7 fix for Windows update. Said it fixed a problem. Tried to update the OS again, but again it never finishes checking for available updates.
 
Any help to get this fixed would be much appreciated, as I don't want to run an unpatched, internet connected PC.
 
TIA,
 
jbarntt56
 

A:Fresh install of W7 SP1, Windows update hangs

Are you getting any Windows Update errors? If you check Event Viewer, System logs, and filter for WindowsUpdateClient, are there any error, warning or critical logs?

Read other 9 answers
RELEVANCY SCORE 66.4

So I installed Windows 7 yesterday. Now when I turn the system off, it downloads something like 70+ updates. When I switch my system back on, I think it tries to install them, but it stays at 0% for 3/4 minutes, then says something about 'reverting' and then goes to the log in screen. The same thing happens everytime I turn it off and back on, it can't seem to install the updates, or whatever it's trying to do when I turn the system on.

Any ideas?

Thanks for any replies.

A:Fresh Windows 7 install, having update problem.

Don't attempt to install such a large batch of updates.

It's more time consuming I know, but try installing them in batches of half-a-dozen or so at a time.

You might also want to change your update settings vis: Start>All Programs>Windows Update>Change Settings>Check for Updates but let me choose whether to download and install them.

By trying to install such a large batch you risk having a load of them fail.

Also, try and install SP1 as soon as you can as a lot of the updates you mention will be included in it.

[SP1] Windows 7 Service Pack 1 (SP1) Download Available

The reverting message can occur when you try and install an update before one in being hasn't finished, but if updates are being installed Windows can and does appear inactive for some time, so give the system time to finish its task.

Read other 6 answers
RELEVANCY SCORE 66.4

Hey people,
So recently I've had a lot of trouble, had a bad hard drive, now it's been replaced and I have reinstalled Vista Home Premium x64. On first start up it says there are 72 updates for my computer. When I okay installation it installs them all except about 5, then it restarts and shows a screen saying that it's installing the updates. Then the wait begins, I fell asleep waiting for it last night, 2 hours down and still no movement.
Is there a way I can just install them a few at a time?
I think it's hanging out cos it can't take that long to apply the changes, can it?

ED

A:Fresh Install Windows update issue

Edhorny,

I recently had similar troubles with updates. Your computer is set to update automatically. If you change this setting to just inform you that there are available updates, then when you view those available you can uncheck and/or check the updates you want to install at any one time.

Once I did that and now only update a handful at a time, I have not had any problems since. Also, I have found out quickly on this forum that other people periodically have problems with a patricular update so it is usually worth your while to investigate the individual updates before you install them. It could save you some headaches.

Hope this helps a bit.

Read other 2 answers
RELEVANCY SCORE 66.4

Have an Inspiron 3268, and just wondering how the licencing works. Currently has Win10 Home, and would like to update to the Creator version - will I need a key, or will it just recognise that it has had Windows 10 on it? For both the upgrade /and/or a full reinstall...
Thanks.

Read other answers
RELEVANCY SCORE 66.4

I've built a new system and after about a week of it operating it has decided to be a complete douche to me for some unknown reason. Everything was okay until I installed the SSD (so I was aware of anyway, the computer belongs to my sister and she never told me when the system used to crash, so it could have crashed before the SSD). Anyways, when I was made aware of the computer issue I checked the Event Viewer logs to see what was wrong and tehre was loads of Kernal Power issues. So I could only assume that maybe the old PSU was not good enough for all the cool new hardware, so I bought a new PSU; although the problem still persisted.

I've had more chance to observe the system today and determine what is going on. I've removed 2 HDDs from the system and kept the SSD in (I ran a health check of the SSD on my own system, and it reported it to be perfectly fine). Anyways, reformatted the SSD and everything was going well after installation. After give the OS a lovely 150 updates it BSOD on me. I read a log which suggested there was bad drivers, so I just assumed the ethernet drivers I had to manually install were incorrect (even though they worked fine before SSD upgrade). So I went to a wireless connection for the time being, did everything all over again and got the same result. At this point I determine Windows Update must be giving me grief. I installed security updates only at first, and everything was going fine. Then installed SP1, and after maybe the odd 3 more updates... Read more

A:BSOD even after fresh install (Windows Update may be the cause)

Hello Mattster.

Scan the system for possible virus infection. It is needed, despite of it being a clean reinstall.
Anti-rootkit utility TDSSKiller
Windows Defender Offline
Roll back to your display driver to an earlier one.
Download and install Driver Fusion.
Reboot the computer in Advanced Boot Options, safe mode. Search Driver Fusion in your start menu, and remove all components of your Intel Graphics Driver.
Download an immediate older version form Intel Download Center and install it.
Install Service pack 1.

Code:
Windows 7 Kernel Version 7600 MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Learn how to install Windows 7 Service Pack 1 (SP1)
Service Pack Center - Microsoft Windows

Let us know the results. And, next time upload your MSINFO32.nfo file.
Click on the start button
Type "msinfo32" (without quotes) in the search bar of the start menu, click the resulting link. It will open the System Information window.
File>Save. In the "File Name" filed, put "MSINFO32" (without Quote), give the save location to desktop, and click the "save" button.
Give the time for processing, it will save a .nfo file on your desktop.
Zip it, and upload it following the instruction.

Read other 9 answers
RELEVANCY SCORE 66.4

Hey guys, I've had my computer running flawlessly for a year now. Recently I bought a external hard drive for school (computer repair class). In class, we installed windows 7 and ubuntu as partitons on the external hard drive. I brought it home yesterday and unplugged the esata cord from my Primary SSD into my external hard drive with ubuntu on it, and tried to boot from the external instead of my primary SSD. I went into the bios also to make sure the computer was reading the new hard drive as the primary, and was #1 in priority.

The boot manager came up asking which version of Ubunto i would like to load, this is all normal. It started doing the postcheck (I think this is what its called). Its where the list of drivers are being collected before ubunto loads, kind of like running windows 7 in safemode and watching the devices load before windows boots up.

After the list of drivers were loaded, my screen goes completly black, and my monitor comes up saying no input signal. I figured this was a driver problem as ubuntu was installed on my external hard drive using my school computer. So I tried to restart the computer in windows again, to get on the internet to troubleshoot.

I turned the computer off and plugged the esata cord into my SSD, changed the bios settings back so that the SSD was primary and in priority, then sure enough i get the error "Please insert a boot device blah blah blah". The error you get when no operating system is installed. I fooled ar... Read more

A:BSOD after fresh install and windows update! HELP

Windows has recovered from an unexpected shutdown


problem details:

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.256.48
Locale ID: 4105
Additional information about the problem:
BCCode: 1e
BCP1: 0000000000000000
BCP2: 0000000000000000
BCP3: 0000000000000000
BCP4: 0000000000000000
OS Version: 6_1_7600
Service Pack: 0_0
Product: 256_1
Files that help describe the problem:
C:\Windows\Minidump\112510-19578-02.dmp
C:\Users\Cameron\AppData\Local\Temp\WER-22105-0.sysdata.xml
Read our privacy statement online:
Windows 7 Privacy Statement - Microsoft Windows
If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

Read other 9 answers
RELEVANCY SCORE 66.4

Hello everyone. Some background: I wanted to redo a fresh install of Windows 7 onto a Samsung 850 EVO SSD. After using DISKPART to set up the SSD the installation went flawlessly. Of note, I have the Users folder on a separate Toshiba 1TB HDD using Audit Mode instructions I found here. I installed my monitor drivers, mobo drivers, wifi adapter, webcam, HP printer drivers and Google Chrome.

I then proceeded to do the Windows Update. It updated to SP1 fine. I continued Windows Update and it was in the process of installing more critical updates when my BSOD occurred. The necessary files are attached. Thanks for taking time to review my case.

A:BSOD during Windows Update after fresh SSD install

So I just experienced a second BSOD, also while performing Windows Update. Latest log files are attached. I've also been experiencing errors with some Windows Update files.

Read other 9 answers
RELEVANCY SCORE 66.4

Morning,

I am rebuilding a workstation here and I am wonder "when" (In terms of order) do you guy run Windows Update during a bare metal reinstall of Windows 7?

I currently do ALL my drivers first (and confirm all devices are working) and then move over to Windows Update. But I see some folks go to WU right after the Windows 7 installer is done and you are placed on the desktop for the first time?

Thoughts?

Cheers,

VP

A:When is the best time to do Windows Update in a fresh install?

Personally I would do as you said and install the up to date drivers first then apply the updates. That way you wouldn't install any outdated drivers windows update may throw up. After all updates create a system image and store it somewhere safe, that way you never have to go through the process again, you can just recover from your image and save yourself hours of time.

Danny

Read other 9 answers
RELEVANCY SCORE 66.4

As the title says, I have problems with Windows Update. I tried some fixes like: Reset_Reregister_Windows_Update_Components, Reset_Windows_Update_History, MicrosoftFixit50362 (which is a Microsoft Installer Fixer that couldn't install PowerShell), MicrosoftFixit50202. But what I really need is installing .NET Framework 4. I tried forcing it to install, installing it step by step, but it couldn't go further than .NET Framework 3.5. I need that Framework, the other updates don't really matter. And the interesting thing is that my antivirus doesn't say that Windows is not up-to-date, which is not normal, in ESET Smart Security, if Windows is not up-to-date.
If specs matter:
6 GB RAM
AMD Athlon ll X4 750K
AMD Radeon R7 240 4GB GDDR3
Vista SP2
 
 
cbs.txt:
http://www.mediafire.com/view/jsoeje0nxt30g5u/cbs.txt
 
I don't know how to obtain CheckSUR.log.

A:Windows Update stuck at Checking for Updates and can't install Updates manually

Hi antoniu200:
 
Many other Vista users have reported that Windows Update seems to get stuck at "Checking for updates..." for long periods of time, and this problem dates back to the August 2015 Patch Tuesday updates - see my screenshots in ScousaJAY's thread windows update just seems to hang while checking in the VistaForums. This month's December 2015 Patch Tuesday updates required a full hour on my machine before it finished the  "Checking for updates..." phase and finally presented a list of available updates, so you might want to try running a manual Windows Update and leaving your computer alone for an hour or so to see if it eventually runs to completion.
 
You might also want to read Nikilet's recent thread Updates were not configured correctly in that same forum.  Some Vista users, including myself, received an error message this month stating "Updates were not configured correctly. Reverting changes. Please do not turn off your computer" when they tried to install the December 2015 Patch Tuesday updates.  Six updates for the Vista OS and one cumulative update for IE9 were marked as "Failed" on my machine after Windows forced an automatic rollback and re-boot of my machine.  I re-ran Windows Update today and all Important updates that failed yesterday eventually installed successfully ("Checking for updates..." still took about one hour and I declined one Recommended update KB3112148 for Vista and one Optional update KB3106614 for Silver... Read more

Read other 7 answers
RELEVANCY SCORE 66.4

Windows Update Shows Windows 7 Sp1 is needed,
but Sp1 has already been installed a while ago.

OS: Windows 7 64 bit with Sp 1 installed
HP laptop

Any advice or reactions?
 

A:Windows Update: Shows Windows 7 Sp1 is needed

Are you sure it is installed? Windows Update wouldn't find it as an update if you already have it. Go to the start menu and search "Computer". Then right click on "Computer" and select "Properties". Tell me what it states under Windows version and/or take a screenshot.
 

Read other 3 answers
RELEVANCY SCORE 65.6

I am having continuous issues with a BSOD. Here is a little basic info:
Windows 7 Ultimate 64 bit (one week old install)
version of windows is a OEM upgrade (installed fresh from formatted hard drive)
Computer is about 2.5 years old.
Hard drive is 3 months old
RAM is one month old.

I am attempting to update windows via Windows Update. I have also tried to update drivers using Raxco software's Perfect Updater. I can't seem to keep the computer running long enough to get anything updated. Attached is the requested files. Thanks in advance for your assistance.

A:BSOD while trying to update drivers and windows on fresh install

Test your RAM using Memtest86+. Let it run until 6-8 passes have completed or errors have been found.
RAM - Test with Memtest86+

Run an sfc/scannow command in an elevated command prompt at boot. If errors are found, run it twice more with each scan followed by a reboot.
SFC /SCANNOW : Run in Command Prompt at Boot

Run a chkdsk on the system partition to check for bad sectors or system errors.
Disk Check

This may be some sort of hardware issue hence the Memtest & chkdsk.

Read other 2 answers
RELEVANCY SCORE 65.6

Hi guys,

Slight problem I'm having with Vista Ultimate x64. After a fresh install (including format), Windows Update refuses to cooperate. Specifically, it either hangs (downloading of updates either stops at 0% indefinitely, or progresses a bit, then hangs) or crashes (trustedinstaller.exe experiences a crash). I've tried deselecting every update except one to see if it's a certain one that's causing the problem (and further to this, tried this method with different updates), with no joy.

After a format or two, the problem's still around.

System specs:

Core 2 Duo E6850 (3GHz)
4GB DDR2
EVGA e-GeForce 8800GTX video card
Sound Blaster X-Fi XtremeGamer sound card
Vista Ultimate x64, SP1


Really irritating problem - - any and all help is certainly appreciated

-JP

A:Windows Update Hangs/Crashes on Fresh Install

hi one of these may be of help http://support.microsoft.com/kb/906602
http://support.microsoft.com/ph/6527
http://support.microsoft.com/kb/822798
http://www3.telus.net/dandemar/updtcl.htm

Read other 8 answers
RELEVANCY SCORE 65.6

Hi,

This is my 1st BSOD after I did a Bios update on my laptop, followed by a fresh install of Windows 8 Pro. It occurred during my installation of drivers. The BSOD Error message was: Driver Power State Failure. The dump file is attached if anyone can help take a look at it, as its got me worried. The main reason I did a bios update was due to the multiple BSOD I had on my previous Bios.

I did try to open up the Dump file, but have no idea on how to read it. However it did mention the file name ntoskrnl.exe. From online searches, the file is related to my kernel? Does this means I installed the Bios wrongly?

If it matters, during Bios installation, I had to update the EC 1st followed by Bios update which had 2 executable files to run.

Note:
-Bios updated myself, obtained form laptop manufacturer

Edit: Uploaded Files as according to posting instructions. (Running the SF Debug Tool)

If it's I would like to learn how to read these files to solve problems myself if possible. I used WinDbg to open the dumb file, but got lost after that. Possibly tell my how you found the cause of the problem?

A:BSOD after Bios update, and fresh install of Windows 8

Get all available Windows updates, update your chipset driver and your Bluetooth filter driver.

Code:
btfilter.sys Fri Jun 29 09:00:07 2012 (4FED5277)
Atheros Bluetooth Driver
http://www.carrona.org/drivers/driver.php?id=btfilter.sys

HECIx64.sys Tue Jul 3 00:14:58 2012 (4FF21D62)
Intel Management Engine Interface
http://www.carrona.org/drivers/driver.php?id=HECIx64.sys

AMPPAL.sys Tue Jul 17 09:35:22 2012 (500515BA)
Intel? Centrino? Bluetooth 3.0 + High Speed Virtual Adapter driver
http://www.carrona.org/drivers/driver.php?id=AMPPAL.sys

intelppm.sys Thu Jul 26 04:26:48 2012 (5010AAE8)
Intel Processor driver
http://www.carrona.org/drivers/driver.php?id=intelppm.sys

dump_storahci.sys Thu Jul 26 04:30:35 2012 (5010ABCB)
driver created to provide disk access during crash dump file generation
http://www.carrona.org/drivers/driver.php?id=dump_storahci.sys

RtkBtfilter.sys Thu Jul 26 05:16:50 2012 (5010B6A2)
Filter Driver for the Realtek Bluetooth Chip[br]lenovo: Realtek Bluetooth 4.0 driver for Windows 8 (64-bit)
http://www.carrona.org/drivers/driver.php?id=RtkBtfilter.sys

btmaux.sys Mon Aug 27 06:21:13 2012 (503AF5B9)
Intel Bluetooth Auxiliary Service
http://www.carrona.org/drivers/driver.php?id=btmaux.sys

btath_bus.sys Mon Jan 21 10:18:42 2013 (50FD07F2)
Atheros BlueTooth driver
http://www.carrona.org/drivers/driver.php?id=btath_bus.sys

bwcW8x64.sys Wed Feb 13 18:25:48 2013 (511BCC9C)
Killer Bandwidth Control Filter Driver
http://w... Read more

Read other 12 answers
RELEVANCY SCORE 65.6

Hello all,

Installed a new motherboard and everything went well with that untill I start updating windows. Windows downlaods all the updates then does a restart and on the restart I get the blue screen of death. Please help. Many Thanks in advance.

A:Fresh Install - Large Windows Update Crash

Hello powerade,

► This is one, VIRTU LucidInterop WDDM Driver by LucidLogix

Code:
fffff880`04a12090 fffff880`03fd6900Unable to load image \SystemRoot\system32\DRIVERS\VirtuWDDM.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for VirtuWDDM.sys
*** ERROR: Module load completed but symbols could not be loaded for VirtuWDDM.sys
VirtuWDDM+0xe900
Try to upload the driver from lucidlogix with GPU Solution.

► Intel HD Graphics Driver

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck A, {fffffa7fffffffe0, 2, 1, fffff8000316c99c}

Unable to load image \SystemRoot\system32\DRIVERS\igdkmd64.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for igdkmd64.sys
*** ERROR: Module load completed but symbols could not be loaded for igdkmd64.sys
Probably caused by : igdkmd64.sys ( igdkmd64+a376f )

Followup: MachineOwner
Update it from http://downloadcenter.intel.com/Default.aspx.

Do the changes and let us know.

Read other 3 answers