Over 1 million tech questions and answers.

Solved: After HP 'surgery' display not right

Q: Solved: After HP 'surgery' display not right

Presario V3000 laptop, XP, NVIDIA GeForce Go 6150, drivers up to date, so Windows says.

Modem went out, sent to HP twice. Finally fixed. They had to change main board. Now it looks like a wide screen TV receiving nonHD signal and stretching it to full screen. What should be a square is wider than tall.

Also seems to be glary. White fonts on desktop under icons were opaque until I changed to bold font. Menu font (black) sometimes seems to fade together.

It's probably settings, but I don't know where.

I can call HP (AGAIN) but (no offense to anyone) I just hate to talk to people I have trouble understanding. Thought someone here might be able to help.

Appreciate any help.

RELEVANCY SCORE 200
Preferred Solution: Solved: After HP 'surgery' display not right

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: Solved: After HP 'surgery' display not right

Read other 16 answers
RELEVANCY SCORE 48.8

Hi,i was hoping someone can tell me what i should do next.i had Empire monkey
virus and cleaned it from my computer ,you were recommended by the people over
at McAfee,they said someone can explain what to do next.

respectfully,
LL
 

A:After the surgery!

Hi,
From what you say I think you need to post a HijackThis log and then wait for someone qualified (gold shield next to their name) to take you through what needs to be done. Please go no further than the steps below and posting your results for now.You may want to print off this guide just in case.

Using Hijackthis with the self-installer that puts it into Program Files for you:

go to Click here to download HJTsetup.exe

Save HJTsetup.exe to your desktop.
Double click on the HJTsetup.exe icon on your desktop.
By default it will install to C:\Program Files\Hijack This.
Continue to click Next in the setup dialogue boxes until you get to the Select Additional Tasks dialogue.

Put a check by Create a desktop icon then click Next again.

Continue to follow the rest of the prompts from there.
At the final dialogue box click Finish and it will launch Hijack This.

Click on the Do a system scan and save a log file button. It will scan and then save the log and then the log will open in Notepad.

Click on "Edit > Select All" then click on "Edit > Copy" to copy the entire contents of the log.
Paste the log in your next reply.
DO NOT have Hijack This fix anything yet. Most of what it finds will be harmless or even required.

Once you've done this, hang on for further guidance.

Richard.
 

Read other 3 answers
RELEVANCY SCORE 48.4

Yesterday I spent two hours opening a Radeon 5850, cleaning and lubing it. It was noisy as hell and now it's quiet, so time well spent.
 

A:My most complex surgery I ever did

Did you happen to document your progress? Like take pictures of the before, during and after? How about recording fan speeds and temps for the before and after? What did you use to clean it?
Just thinking if someone comes here looking for information on how to do what you just did, by having such information attached, it may very well help that person make a decision on doing it themselves versus bringing it to a "Computer Repair" shop.
 

Read other 4 answers
RELEVANCY SCORE 47.2

Good morning, all! I would like to transplant a Samsung EVO 850 SSD into my Ideapad Z580 notebook from another machine of mine. The SSD has a different OS on it (Linux Mint) than what is on the Lenovo's HDD (which is Windows 8.1), and it is also half the size of the HDD (SSD=250GB, HDD=500GB). When I attempted the transplant, the Lenovo would not boot up past the opening screen and gave me an error message that stated something along the lines of (it went by fast, so I couldn't get the exact wording) "PCI (?) media test failure, please check cable." When I put the original HDD back in there, it booted up as though nothing had happened. I'm wondering why this happened, and would putting a new SSD in there to do a clean install of my OS of choice be preferable? Also, when I attempted to use both a USB drive and a disc to install my OS of choice on it, I could not get it to boot from either of those options in BIOS. What am I doing wrong, here?

A:Ideapad Brain Surgery Not Working!

I would expect it to work.  Are you sure the SSD is good?

Read other 1 answers
RELEVANCY SCORE 47.2

Hi all,
Haven't made a post in a long time and I'm surprised my account is still active.

Here's the verdict; my laptop came shipped with an OEM Windows Vista installation. I wanted to dual-boot it with Windows XP but needed XP on the C: partition (plus the issue with older version of windows should be installed before a new version is installed) forced me to re-format, install XP SP3, install all the drivers and bring me to what it is now.

My laptop is fully functioning with Windows XP. I have a Linux Ubuntu 8.04 CD, Windows Vista OEM dvd and windows xp sp3 cd at hand. I want to dual boot my system with either windows vista, linux, or both.

Please answer these two questions:

1.) If I create a new partition and install Vista on the new partition, is it possible to upgrade the Vista installation to Windows 7 WITHOUT DOING ANY HARM AT ALL TO THE XP PARTITION OR IT'S BOOT LOADER? So I will then have a dual boot system with Windows XP and 7 (and both OS's fully working)?

2.) If I install Linux in a new partition alongside my XP partition will it be possible to install vista on a third partition AFTER I have installed Linux? So the order in which the operating systems have been installed would be:
- 1. Windows XP installed first
- 2. Linux Ubuntu installed second
- 3. Windows Vista installed third

Any help will be very much appreciated (as long as it's from someone who knows what they are talking about).

Thanks

Read other answers
RELEVANCY SCORE 47.2

Hi I think there,s a problem in here. I have BB (Comcast) running XP sp2 IE sp2
i'd sure be grateful if someone would please take a look ay my HJT? My puter is running so slow at times and doing other strange mysteries. I thought at one point I may be have a trojan, but NIS , S&D, Spyware Dr and Spywre Blaster & Ad Aware don't pick anything up. Thank you all. Bad

Logfile of HijackThis v1.99.1
Scan saved at 10:28:57 AM, on 5/1/2005
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)

Running processes:
C:\WINDOWS\System32\smss.exe
C:\WINDOWS\SYSTEM32\winlogon.exe
C:\WINDOWS\system32\services.exe
C:\WINDOWS\system32\lsass.exe
C:\WINDOWS\system32\svchost.exe
C:\WINDOWS\System32\svchost.exe
C:\Program Files\Common Files\Symantec Shared\ccSetMgr.exe
C:\Program Files\Common Files\Symantec Shared\SNDSrvc.exe
C:\WINDOWS\Explorer.EXE
C:\Program Files\Common Files\Symantec Shared\ccEvtMgr.exe
C:\WINDOWS\system32\spoolsv.exe
C:\WINDOWS\Nhksrv.exe
C:\Program Files\Common Files\AOL\ACS\AOLAcsd.exe
C:\Program Files\Common Files\AOL\TopSpeed\2.0\aoltsmon.exe
C:\Program Files\Common Files\Symantec Shared\ccProxy.exe
C:\Program Files\Common Files\EPSON\EBAPI\SAgent2.exe
C:\Program Files\Norton Internet Security\Norton AntiVirus\navapsvc.exe
C:\Program Files\Norton Internet Security\Norton AntiVirus\SAVScan.exe
C:\Program Files\Common Files\Symantec Shared\CCPD-LC\symlcsvc.exe
C:\Program Files\Common Files\Symantec Shared\Security C... Read more

A:i tnink this puter needs some brain surgery

Read other 8 answers
RELEVANCY SCORE 46.8

Both epithelial- and genes associated with the argument. Strikingly, when he was interrogated expression of the genetic signature of stem cells in the two cohorts TNBC independent large tumorMiracle Bust s with the signing of stem cell activation showed more likely to relapse in the first years after diagnosis, compared with lower scores enabled to stem the si Miracle Bust Reviews gning of cellular genes. In contrast, in three groups of ER + breast cancer independent of large data, which are tumors activate the stem cell signature identified at least prone to metastasize. Discretion issued by stem cell gene .

http://www.optimalnutritions.com/miracle-bust-reviews

Read other answers
RELEVANCY SCORE 46

Hello, I'm Audiotape and I'm in a bit of a pickle,
 
 
--- Before you read the meat and potatoes, I made my thread here as I don't have an active out of control infection or major booting problem, but please let me know if I accidentally bleepposted somewhere and will attempt to fix my post lol. You might be able to avoid reading this whole thing because I have given you (what i think) is the most important info in the next three paragraphs. ---
 
 
Meat and potatoes
 
Yes, as the thread title partially suggests, I ran disk cleanup, Eraser, unhide, rkill, Fixexec, Combofix, and finally Malwarebytes in a normal boot, without being asked by a helper. I have other minor computer issues and although neither new issues nor previous issues were caused or exacerbated by Combofix, respectively, I feel you should know about them.
 
 
Why? Took the advice of another forum and I think they are erroneous. The professionalism and shear number of threads and guides I have seen here suggests this. 
 
 
Everything below this might be info contained in some log Il be asked to produce, idk, but regardless I provided background info. Hope I didn't waste time. Since idk how things work on this forum, if you know what my next steps should be and will stop reading now, atleast skip to the note in red below please!
If not, onward!
 
 
 
 
 
 
I did not run Comb... Read more

A:Performed Surgery On My PC With No Knowledge Of Post-Op Care...(I ran Combofix)

Since you ran combofix, Please follow the instructions in ==>This Guide<==.Once the proper logs are created, then make a NEW TOPIC and post it ==>HERE<== Please include the link to this topic in your new topic and a description of your computer issues and what you have done to resolve them.If you can produce at least some of the logs, then please create the new topic and explain what happens when you try to create the log(s) that you couldn't get. If you cannot produce any of the logs, then still post the topic and explain that you followed the Prep. Guide, were unable to create the logs, and describe what happens when you try to create the logs.Once you have created the new topic, please reply back here with a link to the new topic.

Read other 4 answers
RELEVANCY SCORE 45.6

AUBURN, Ala. -- Auburn All-Southeastern Conference linebacker K.J. Britt will undergo thumb surgery.
Team spokesperson Kirk Sampson said Thursday that Britt is scheduled to undergo surgery on Friday, a day before the 13th-ranked Tigers host Arkansas. It wasn't immediately clear how long Britt will be out.
Britt is leading the team with 23 tackles through two games, including one tackle for loss. He was a first-team Associated Press All-SEC pick last season and is a team captain.
Britt had 69 tackles last season, including 10 for a loss and 2.5 sacks. Freshman Wesley Steiner is listed as his backup.
Fellow linebacker Chandler Wooten had already opted out for the season.
More site:cffanstore.com

Read other answers
RELEVANCY SCORE 38.4

My Dell Insipron 6400 laptop will not support multiple monitors. I think I may not have a key driver installed. Help!!

I have attached two separate images, screen shot of my device manager and display properties and a screen shot of the same image on my mothers PC. (which is also a Dell Inspiron 6400)

On my PC, In my device manager I can not view the display adapters (there must be something installed and I do not have visiblilty?? correct??)

Also, on my display properties I do not even have the option for Multiple monitor support. (these are the same PC's)

I inserted my Drivers and Utilities CD from Dell, but I did not see any driver on there that was applicable to a display adapter.

Am I on the right track???

Thanks

CoachKrav
 

A:Solved: Display Adapters - Display Properties - DualView - Multiple Monitor Support

Read other 6 answers
RELEVANCY SCORE 38

this is a strange one to me...

the hdwe is a hp "minitower" athlon processor, embedded nvidia vid, fairly fast and responsive on a good day.
I worked on this system a year ago, obsessively, setting up Vista as well as is possible - lean/clean/stable.
recently the primary user account, upon logging in, gets a "noise" display on the monitor that looks like an inability to sync.
I shall not rule out the possibility that an "extortion-ware" malware is causing this but extensive checks don't show any malicious thingies. There is a lightly used, tech-support second user account that logs in fine.
I set the display properties on the troubled account, the display looked normal again, but after a couple of days of use, the bad display issue is back.

is this a known issue? video refresh rate anomaly ??? why would it be "fine" for a year, then suddenly develop the problem? debug steps?

I worked on it 2 weeks ago and it was fine when I finished, now in the ditch again so I'm fishing for new debug steps to try and determine what exactly causes it to go non-linear...

thanks for your suggestions
 

A:Solved: Vista loses display settings - garbled display

Read other 7 answers
RELEVANCY SCORE 37.6

hello,

haven't been here for a while because haven't got much time to sit and enjoy the computer how are you guys doing?

well, I believe that vista comes with loads more problems than XP. I messed up my XP because I mess with it, but vista? doesn't even touch it but it messed up by itself! argh.

to make the story short. about 3 hrs ago I went online and presented with 14 new CRITICAL updates from windows update. I picked everything that's under 1MB in size so I can speed up the install process. the last time I tried to install everything, got many problems from some updates refused to install and some are even failing and wants to be re-downloaded only to fail again because the order of installing those stuff isn't correct. nuts. well anyway, so I picked about 6-8 updates if not mistaken. then the computer wants to reboot, so I did let it reboot, and it came back OK. then I left for the bathroom for about 5 minutes, when I came back the screen already go to screen saver mode and when I move the mouse all I see is this garbled display. so I shut the computer down, waited about 10 minutes and turn it on. the problem is worse, the whole screen is white! I can't see a darn thing. it turned black for a while when the windows green bar thingy supposed to came on, but then it goes back to white. geez!

even though I want to roll back those updates so much, how can I do it without being able to see what's on the screen? and I've been rea... Read more

A:Solved: display fails to display anything after latest winupdate

What happens if you start tapping F8 immediately on startup what do you get?
 

Read other 2 answers
RELEVANCY SCORE 37.6

Recently the backlight went out on the wifes&#8217; laptop display. Thinking that I was pretty smart, I picked up a replacement on eBay.
What came out of the laptop is a 15.0 XGA Samsung with a part number of 5F4G64512F.
What I ended up with (my own fault) was a LG Phillips LP150X2 XGA Display. The cable is different, however it still plugs into the video card.
So I figure ill give it a try any way.

The display only displays on two thirds (left side). See Signature for system info. .

What should I do? I&#8217;m lost.
Thanks,
Eric
 

A:Solved: Inspiron 5160 display, partial display

Read other 10 answers
RELEVANCY SCORE 34.4

I have Dell Inspiron 5547 laptop (Touch Screen, 15 inches, 16 GB RAM and i7 4th Gen processor, Out of Warranty). Some days back, suddenly the display went dim and anything is hardly visible. After some initial investigation, the display chip (may be VGA or LED display chip) on the motherboard appears to be burnt out (may be due to voltage surge). Even the numbers printed on the chip is not readable because of which it is difficult for the local repairing shops to repair this problem.
I think Dell India Service Center doesn't deal with chip level repair and hence replacing motherboard is the only way they can fix this. This will be very costly (considering that the laptop is not under warranty so will have to pay for warranty extension, motherboard replacement and repair service) and time consuming.
Hence, to avoid all this I have come here to seek some assistance.
If there are anyone using the same laptop (Inspiron 5000 series 5547 Touch Screen Display with i7 4th Gen Processor and 16 GB RAM) then could you please take a clear picture of your laptop's motherboard or if you recognize the display chip then only that should be sufficient. In this case, I can read the chip related number from the image and try to repair it.
What are the charges for buying a warranty for the laptop, motherboard of my laptop and repairing charge? 

Request your response and help.

Regards,
Rohit Kumar

A:Display Issue - Dim Display for Dell Inspiron 5000 (Model 5547) - Touch Screen Display with i7 4th Gen Processor and 16 GB RAM

You'll have to call Dell about the possibility of a warranty extension;  in the US, it's sometimes possible but will likely run over $300 -- or about what a board replacement would cost.
If you're getting video, the GPU is OK -- and it's more likely the power circuit to the backlight that's bad.  It'll likely cost as much to repair as to replace the board -- though you'll still be putting $300-400 into an out of warranty system, so replacing the system may be a better idea (if you do this, consider buying a 3-year warranty with the next system).

Read other 1 answers
RELEVANCY SCORE 34.4

Windows 7 EnterpriseSystem does not see or react to external display when connectedNothing displays when connectedExternal display says nothing connectedTried multiple dongles - same results
Other system that include a VGA connector work just fine to same external display.

Read other answers
RELEVANCY SCORE 34.4

Question that I could not find an answer for on Google before I buy. I currently have a Dell 6420 using Win 7 SP1 with a 1366 X 768 display that I have the text set at 125% so I can read it. What display is going to look better on an X1 Carbon if I use that setting, the 2560 x 1440 WQHD IPS LED Display or the 1920 x 1080 Full HD IPS LED Display using Win 7 Pro?

Read other answers
RELEVANCY SCORE 30.8

Display is rotated 90 degrees clockwise. Help!
 

A:Solved: Display

Hi and welcome to TSG.

Try holding down the "Control" (Ctl) and "Alt" keys down at the same time while tapping the up arrow or other arrow keys on the keyboard.

If that does not work, let us know the exact brand and model number of the computer and the exact brand and model number of the video controller card if it uses a plug in video card.
 

Read other 3 answers
RELEVANCY SCORE 30.8

When I click start and then the all programs button, the list of programs is displayed on a single column. How do I change this to a multi column format?

Thanks

John
 

A:Solved: display

If you are using WinXP, right click on the start button and choose properties. With the Start menu tab selected choose Customize. If you have start menu chosen (and not Classic start menu) on the next screen click advanced. Under start menu items mark sure "scroll programs" is not chosen. Post back if not using XP or if using "classic start menu".
 

Read other 3 answers
RELEVANCY SCORE 30.8

Asus A8n-E Mobo-
PCI 16 GeForce card

Get no POST-Black screen

Tried:
swapping Card out with known good card.
changing cmos battery with new one
Swapping out Power supply

Beep Code 1 long 3 short
All fans run
 

A:Solved: NO Display

Read other 7 answers
RELEVANCY SCORE 30.8

Hope you techy people can help me coz i'm useless...

My mate has just downloaded a HP update onto his computer (he's running Vista). since doing it his display has become too big.. ie all his icons are huge on his desktop screen and when he opens any windows they are too big for the screen.

I havent seen his display only talked over the phone so cant physically fiddle with his computer, he's tried playing with display settings and even restoring to before he downloaded the update but it wont let him.

any ideas anyone.. oh and in laymans terms pls like i said i'm rubbish.
thanks...sam
 

A:Solved: display help!!!!

Read other 6 answers
RELEVANCY SCORE 30.8

Hi, this is my very first time here & not sure where to post, sorry? I'm also not sure how, or where I'll see the response? Sorry if I'm in the wrong place? My problem (if anyone can help?) is: I have an ACER Aspire 6930G with no display. The laptop starts up no problem but there's no display whatsoever. Please can you give me any directions on this? Will I need a new screen or is it something simple? The laptop is approximately 4-5 years old, and while I understand that laptops this age will start going wrong, money is tight & I really can't afford anything major. I've attempted to reboot in safe-mode without success, I've also attempted to connect to an external monitor but this hasn't worked either. I've tried the 'FN-F5' method & this has also failed. My suspicion is that the screen and/or video processor on the MB has given up? Any help would be greatly appreciated. Thanks.
 

A:Solved: No display

Read other 7 answers
RELEVANCY SCORE 30.8

I have a computer that can't seem to display anything above 800x600... yeah... i am a member of of the 1% of people that use it(unfortunately) the problem: when i go to change the screen res... it tells me..."can't display this video mode optimum resolution 1280x768" that's all fine and dandy except... it can't display that either... in fact it can't even display 1024x768... windows update already downloaded something for the DELL E197FP(the monitor)... and... i tried finding drivers for the video card... witch is just the standard VGA port on my ASUS P4S533-MX (motherboard)... i can't find anything, i've used a driver checker and it only finds audio updates.... i know the monitor can display 1024x768... if i use a different computer... any help or suggestions would be great thanks in advance
 

A:Solved: Display help

Read other 9 answers
RELEVANCY SCORE 30.8

Hello, this is how the problem started.

I left my pc on while i was gone for hours and when i came i noticed it was off and i turned it on, the screen showed no display and i checked the monitor snd cables and everything is alright, i think my pc is having problems to resume the sleep or hibernate. How can i solve it?

A:[SOLVED] No display

Hi and Welcome to TSF!

Have you tried to force restart the PC by pressing down the power button?

Read other 8 answers
RELEVANCY SCORE 30.8

I have been reading all of the posts regarding the red X being displayed instead of pictures. I have gone through all of the suggestions on all of the posts regarding going into security making sure the scripting is enabled etc. and still nothing. I do not use Outlook for my email I use Incredimail but this happens in other programs as well, Norton's, Turbo tax, Quicken. Can anyone figure this mystery out?
I run xp and have done the new big update. I think I got buttons, paperclips and pictures before I downloaded that but can't be sure.
Thanks for your help!
 

A:Solved: Red X display

Read other 12 answers
RELEVANCY SCORE 30.8

Hi Guys,
I have an HP Pavillion DV9000 which I believe has driver issues but not sure. It is running Vista Home Premium and the attached is what I get after doing a reinstallation. I did a reinstallation because I am only getting a display with an external monitor, once finished the laptop worked again (laptop lcd). Started updates and installed software and restarted and once again no display! Has anyone seen this, could it be the graphics chip? or driver issue?
Thanks in advance!
 

A:Solved: Please look at display!

Read other 14 answers
RELEVANCY SCORE 30.8

I bought an old P3 computer and the first time i turned it on it worked fine, even tried to boot up to windows, but it couldent because it was not formatted. I changed some settings in the bios such as enabling usb controller, and i changed the cpu frequency a little. I know nothing about the motherboard except that it says xcel2000 on it, and when it restarted it showed nothing on the screen. Nothing at all! I know it has a blown integrated graphics, but i tried multiple graphics cards to no avail. The motherboard isnt grounded i dont know what elce can cause this.
 

A:Solved: Help With Display!!

Read other 13 answers
RELEVANCY SCORE 30.8

I have at the bottom right of my display a black box which appears everytime I click on the screen with my mouse. The black box contains the letters "DPI" followed by numbers prefixed with X: & Y:. It appears to interfere with the operation of the mouse. How can I remove this extremely annoying occurence?
 

A:Solved: DPI on display

Read other 6 answers
RELEVANCY SCORE 30.8

I just downloaded an update to my GeForce 6800 card because I needed the HD setting. Since then I cannot save my display settings. When I turn off my PC I have to go into Properties>Appearance>Advanced and change almost anything to restore my display setting. What could cause this?
 

A:Solved: Display

Sounds like the drivers did not install properly or they were the wrong drivers. Download the latest version for your hardware and OS, uninstall the old drivers, reboot, and install the new drivers.
 

Read other 1 answers
RELEVANCY SCORE 30.8

Alright well I purchased a new mobo and that didn't fix my problem...

I connect everything to the right spot and turn the computer on. Everything that should light up turns on and the fans start running as well but I get no display at all.

I've checked the monitor and that's fine.
The RAM should be good.
Graphics card has been tested and it's fine.
Only thing I can think of that might not be working is the power supply or CPU.

but would those keep the monitor from giving a display?
 

A:Solved: Still no display ?!!??!?!?!?!?!?!?

Read other 16 answers
RELEVANCY SCORE 30.4

I started up my computer this morning and opened OE6 to read my mail and there were only 3 folders available, all created today: 1. In-Box (1) - 3 new messages; 2. Deleted Items (1) - empty;3. Misc (1) - empty. I should have 18 folders and there are a LOT of messages. I looked in 'C' Drive where the OE6 files are located and all the .dbx files are there.

Why did the system ignore them and create these 3 new ones (with the (1) behind them)? I thought I would import all the folders, but the system won't let me. I keep getting a box popping up that says, "The specified message store could not be opened. It may be in use by Outlook Express".

By the way, I have Windows 2000 Pro and scads of virus, spyware, adware software which are all up to date as are all the Microsoft 'updates'.

I guess I could move all the .dbx folders to a safe place and then re-install OE6, and then import all the former .dbx files but that is quite a bit of work and I am worried the same thing will happen the next time I start up my computer. Please help
 

A:Solved: OE6 - All .dbx files won't display

Read other 7 answers
RELEVANCY SCORE 30.4

I have a private web site. It's a vanity thing really. I've always been able to get into my files using ftp:// and then the web address. When one does this to a web site one then gets a dialogue box asking for user name and password. I am now not getting this far. I.E. immediately says that it cannot display this web page. My hoster says it's me but I've got several friends and family to try it and they get the same result. Firefox and Chrome both access it correctly. I can access other sites' ftp with no difficulty using I.E. (at least I can get as far as the log in). It is therfore something quite specific to my site at the hosts and Internet Explorer. If I enter my host's site, ftp:// followed by easyinternetsolutions . co . uk (no spaces of course) then I certainly get their log in. If anyone has any idea then I could get back to them and tell them that are wrong!!!

Before anyone says "well use Firefox then", the beauty of I.E. is that there is the facility to open the ftp page using Windows Explorer and it is then simplicity itself to upload files by "copy and paste".
 

A:Solved: I.E. can't display ftp page.

Read other 14 answers
RELEVANCY SCORE 30.4

I had a dim screen on my m35x satelite toshiba laptop and then it went blank. I have replaced the inverter and now the screen is bright (yet not blank) are there cables I should check and if so where and how. I can hear windows start up music but no change in display.
 

Read other answers
RELEVANCY SCORE 30.4

PNGs used to load on my IE6 fine, but after restoring winsock, i can't view PNGs in Ie anymore. can anyone help me? thanks.
 

A:[SOLVED] PNG display problem

High light a png file and then hold the shift key down and right click on the file and pick "open with" and then pick IE from the list.
Uncheck the all use this program for this file type.
Once you know you had picked the right file type then do the same thing again but put a check in the box and it will always use that program.
 

Read other 3 answers
RELEVANCY SCORE 30.4

Hi, I hope this is the right place to put this. I have Windows XP Home SP2 and yesterday when I started up the computer the task bar and the top of a window is displayed like a windows me theme and not XPs clean design.
The only thing that might have changed it is adobe reader 7 which I installed the day before the display changed.
Is there any way to change it back to the origional display?
 

A:Solved: Display Problem!!!

Read other 16 answers
RELEVANCY SCORE 30.4

I have been getting fragments and underdrawing on my display for a week or so now and I haven't been able to resolve the issue by lowering my refresh rate or any of the other Windows troubleshooting tips. Also, some of my programs will shut down randomly.

This morning, I got the "ialmrnt5" error that said the ialmrnt5 display driver had stopped working properly and it completely booted me and sent me into safe mode and told me to reboot and that I would get a 'report'. I rebooted and got no report, so I went and downloaded the latest intel driver for my computer, installed it and then rebooted.

The active desktop now won't restore and I am still having fragmenting and underdrawing problems.

Any ideas?
 

A:Solved: Problem with display

Read other 16 answers
RELEVANCY SCORE 30.4

Hi,
I have IE7 loaded and a google toolbar and crawler toolbar loaded as add-ons. It was all working fine untill this morning when I restarted my computer. Then neither of my toolbars would show in explorer. The programs are still listed in the manage add-on section and are listed as enabled. They also work in other browsers. But for some reason not in Explorer.

I have XP as my OS and already tried to reinstall IE. But when I go in the toolbars and right-click, I don't get the option to choose my added toolbars to view.

A:[SOLVED] IE7 won't display enabled add-ons???

Hello and welcome to TSF

Please do this:
Click Here to download ToolbarCop. Save it to your desktop.
Go to your desktop and extract toolbarcop.zip.
Go to the extracted files
Double click on Toolbarcop.exe
Click on the notepad symbol:
A notepad file should pop up, please copy and paste Everything from the notepad file and paste it back into this thread.

Read other 5 answers
RELEVANCY SCORE 30.4

Hi:
When XP started this evening, all of icons on desktop were disarrayed and all fonts and icons got larger even though I never changed to 'larger' from 'normal' size.

I accessed 'Display Property' in my attempt to get display back to the normal, however nothing happened and still display issue existing.

How to get display property back to the original state when I set?

Thanks for your help in advance.

A:[SOLVED] Display Issue

Hi,

Have you tried using the "Last Known Good Configuration" option?

-Start your computer and keep tapping the F8 key.
-When the Windows Advanced Options menu appears, use the ARROW keys to select Last Known Good Configuration (your most recent settings that worked), and then press ENTER.

If that doesn't work, restart your computer again, tap the F8 key, select the Windows Safe Mode, once there use the Windows System Restore feature to restore your computer to an earlier state.

Just curious, did you recently update/install any drivers? The video driver perhaps?

Read other 4 answers
RELEVANCY SCORE 30.4

Hi all,
I am running XP on a Sony Vaio and i think i am having issues with my display settings.
Is it right that i should have 2 displays showing in display properties - 1 is multiple monitors on Nvidia and 2 is default monitor on Nvidia?
The reason i ask is because i tried to update my video driver and ever since the screen quality has never looked as sharp as it used to.
I went onto my desktop pc and that has only 1 monitor showing.
I tried to delete one of the displays in device manager but it keeps coming back.
Any ideas?
Thanks,
Craig.
 

A:Solved: Display settings

Is this a double post?

I see you have this marked as solved, and you have created a new post

joan
 

Read other 1 answers
RELEVANCY SCORE 30.4

I posted the following in another forum where I was also asking for help about a random crashing problem, but please just pay attention to the parts about the display problem:

Not only does my computer freeze randomly, but now the display is messed up. A lot of times when I scroll through pages, the text and images get all garbled and screwed up. Sometimes, when I select the text, the problem goes away, but otherwise it's been annoying me for a few days now.

I did a clean uninstall and reinstall of my graphics drivers, and reinstalled the drivers for my monitor. The problem didn't go away. The only other time anything like this has happened was when my video card was loose, but I fixed that quickly. I also tried changing my display settings, but that only made it worse. And it does it in safe mode, too. I suspect that my video card is failing, now.

Speaking of my dying computer in general, I also cannot scan and remove viruses because the computer always locks up mid-scan. And there was at least 1 virus.

But to give you a sense of what it looks like, here's a screenshot I took:
Because only certain parts of the items displayed are garbled, I don't think it's a connection problem. As I'm finishing typing this, 70% of the text in the box has already become unreadable.

edit: OMG, right after I typed this the problem went away. But it'll come back, because it went away for about an hour after I redid the drivers. But it will always cras... Read more

A:Solved: Serious display problem

Remove your graphics card & clean the contacts on it. (a pencil rubber is good for this).
Replace it & try again.

If this doesnt work, can you beg/steal or borrow a different graphics card to try in this pc, before you replace your current card to make sure this is the prob.
 

Read other 2 answers
RELEVANCY SCORE 30.4

I updated all my drivers using DriverMax and then verified those uploads against Intel's updated driver support scan. Both agreed with each other on the updates and that all was well. It was some week later when I was working and closed the lid on my HP dv7 (Win 7 Home Premium) opened it again within 10 seconds and ever since the screen simply doesn't come back after closing the lid. I have set all power options to Max Performance, turned off Hibernation and Sleep with no change in outcome. Checked the updated BIOS (updated via OM Intel site) and no applicable (or at least identified) power settings found. Suggestions welcomed!

HP dv7 Entertainment

Win 7 Home Premium 64 Bit
i5 460M @ 2.53GHz / RAM 6 GB DDR3
Motherboard HP 163D (CPU)

Graphics - Generic PnP Monitor
ATI Mobility Radeon HD 6370 HP
625GB HD ATA (SATA)
 

A:Solved: Display Down after Lid Closes

check the video driver is the hp one

check for anything at the time of the problem in the event viewer
 

Read other 3 answers
RELEVANCY SCORE 30.4

I had a previous problem (Windows-No disk) which appeared to be solved. However, shortly afterward, I began receiving the following error at boot up:
"Display.exe-No disk There is no disk in the drive. Please insert a disk into Drive\Device\Harddisk2\DR14"
I am attaching Hijackthis.log.
Thanks for any help.
 

A:Solved: Display.exe=No Disk

I just realized that there are two other error window titles: "weatherpulse.exe-no disk" and Titan B-2.exe-No disk" and that the "DR14" is sometimes "DR1". I don't know if any of that makes any difference. Again, thanks for any help. Ned
 

Read other 1 answers
RELEVANCY SCORE 30.4

Hi all, im trying to sort a neighbours computer out never come accross this problem before I initially thought it was the graphics card. So replaced the graphics card and still no join all im getting is a black screen from what i know of the computer its a custom build and was working fine for ages until recently with no display. On start up all seems to be fine for a few seconds until the beeps which sounds just like the old windows 95 crash screen. Ive fixed computers for a while now and aint come accross thie problem before which is why ive come here as ive used this site before.

Thanks in advance for the help.
 

A:Solved: No Monitor Display

Read other 9 answers
RELEVANCY SCORE 30.4

HI guys

Ok so I wait to the official release of the final Sp3 was available to download (no more Betas). So I decide to download the ISO of Service pack 3 from Microsoft download page and burned into a disk, so from the disk just install it...oh no !!>>> everything was going Ok.

But suddenly ...the bar stopped and a little window appear saying that there's am internal error and the install will close ??!!
Ok... well I try using the normal windows update, downloaded ok , start wizard and then same ting stop and say that there was an internal error and the app. needs to close.
what happened ?? Do I'm missing another update or any special file so I can be able to Install this new SP3 from Microsoft? ?
Any ideas how to fix this? or why is this happening?

Toti

 

A:Solved: SP3 display error

Read other 16 answers
RELEVANCY SCORE 30.4

Hey everyone,

I've got a Dell 17" LCD monitor (model: E173FP) and a question.

I need to fix the driver since I just reformatted; however, I can't edit a particular setting.

Follow me on this part: [right-click desktop] and select "Properties" => "Settings" => "Advanced" => "Monitor".

I need to get to the "Properties" screen, which is where the "Drivers" options are. Unfortunately, the entire "Properties" screen is grayed out, so I can't click "Properties" or change the Monitor Settings like the Hertz rate.

What is the work around for this?


Oh yeah, Dell said I have to pay them $50 if I want them to fix it. Noooooo!


Thanks!

-- Annoyed Dell User

A:[SOLVED] Display Properties

Hello Annoyed,

Have you reinstalled all drivers (Chipset,Graphics,Audio,etc) after reinstalling Windows?
Look in Device Manager and make sure that there is no yellow ?'s or !'s listed.

If you have all drivers installed you can download the driver for your monitor from the Dell site.

http://support.dell.com/support/topi...=19&l=en&s=dhs

Read other 3 answers
RELEVANCY SCORE 30.4

I turned on the computer this morning like the usual. My computer seem to turning normally, you can hear the sound and light. The monitor power is on (the light turned green then to orange).But It only displayed this message "cable disconnected input:HD15. Go to power save". Sorry if I post this in the wrong section, it's my first time posting here and any help is much appreciated!

A:[SOLVED] Monitor does not display help!

Make sure your VGA Cable is properly connected and it hasn't came loose.. Can you see anything on the screen, like the BIOS screen?

Read other 5 answers