Over 1 million tech questions and answers.

X260 Keyboard not working after undocking

Q: X260 Keyboard not working after undocking

Hi I have had two X260's now which after undocking ( from a Lenovo Think pad pro dock ) the laptop keyboard stops working, charcaters dont appear on the screen until you tap the small red mouse in the centre of the keypad, each time you want to type you need to hit it again. Once the laptop is redocked the keyboad works as normal again. Is this something anyone has come across before ?

Read other answers
RELEVANCY SCORE 200
Preferred Solution: X260 Keyboard not working after undocking

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

RELEVANCY SCORE 60.4

Hello, I am running LenovoX260 with Windows 7, I additional installed the lenovo updatecenter. All drivers are updated according to lenovo7 update center. Symptom: Basically, when the machine boots on battery all keyboard strokes are delayed for roughly 5 seconds or an easy touch of touchpad or trackpoint -- whatever comes first. The machine has not a high load at this time and no keystroke is lost. It is just delayed strongly. To make it more complicate, this symptom disappears until next reboot when I lock the screen with win+l and reunlock the screen with my password. It also disappears when I plugin the powerplug, but it also reappears when I unplug it again on the login screen. Once I relogged/unlocked this effect does not reappear. Booting with power plugged in is fine. Any ideas?

Read other answers
RELEVANCY SCORE 56

Hi Guys,im searching for a belgium keyboard for the x260 - can't even find the FRU /Partnumber.Backlight-Keyboard X240/X250/X260 Belgium (should be AZERTY)thx for help.maikl

Read other answers
RELEVANCY SCORE 55.2

I have a clean install of Win 10 Pro and current drivers installed. The touchpad and the keyboard stutters sometimes. Partially no reaction for a few seconds. I hope you can help me to fix this issue.This is very annoying for a notebook of this price class. My X230 works fine with Win 10. What i noticed when this occurs is: - During a certain CPU an RAM activity, as an example installing updates- only in battery mode

Read other answers
RELEVANCY SCORE 55.2

Hello.I have a x260 laptop and i want to replace the keyboard with a backlit one.my question is that if the keyboard is if all x260 laptops are compatible with backlit keyboard or there ar specific models for that?if it`s compatible do you know where can i buy one?thank you in advance

Read other answers
RELEVANCY SCORE 54.8

Hi all,  my company gave me  x260 notebook. When i start notebook and see lock screen, i am trying to write my info but keyboard does not respond. When i move mouse all writing came to screen. It is also same in desktop.  To sum up you cant write anything. You need to move mouse everytime.  Anyone knows it?

Read other answers
RELEVANCY SCORE 54.8

Hi all,  my company gave me  x260 notebook. When i start notebook and see lock screen, i am trying to write my info but keyboard does not respond. When i move mouse all writing came to screen. It is also same in desktop.  To sum up you cant write anything. You need to move mouse everytime.  Anyone knows it?

A:X260 Keyboard does not respond unless i nove mouse

Hi there, Burak           -
 
Thank you for writing in to the Lenovo Forum - happy to have you here today.
 
Also, you can also start by flushing out all static, remove battery and AC adaptor and hold down power button for about 20 seconds.
 
Please click here update the synaptic drivers.
 
Update us how it goes.
 
 
 
 
Regards,
 
Tap that kudos button if I helped  If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!

Read other 1 answers
RELEVANCY SCORE 54

Backstory: We are a large university with about 2000 students and 150 or so teachers/employees, we have an SCCM server and deploying Windows 7 Enterprise across all our windows based devices. We recently received 30 X260's from a SLA. We have zero issues with our T450s' and T430s'.  ISSUE: The X260's deploy correctly, but once the login screen is displayed the keyboard becomes unresponsive. It'll accept the first key, then 'freeze' You can still use the mouse, and TAB to change to the password field, which also is unresponsive. Interestingly enough i also experience the keyboard becoming unresponsive at the ThinkVantage bios screen (where you select a diff. boot device). We have opening 4 of the 30 total computers recieved, all with similiar faults. Tried solutions:I manually installed Win7 Enterprise from a USB drive, but during pre installation im prompted for a driver CD/DVD, the x260 doesn't have a CD/DVD drive.... Installation quits. Later today im planning on trying a manual Windows 10 Enterprise install to see what happens then.  Has anyone else experienced these issues with their X260's in conjuction with SCCM at enterprise environments? 

Read other answers
RELEVANCY SCORE 52

I just got my new x260. I inserted the new sim card today, and it is not recognized by my computer. How can I fix the problem?

Read other answers
RELEVANCY SCORE 50.8

Hi all, appologies for the long post. I am using Windows 7 and re-building an image for the Lenovo X260 as a few users have reported an error with Power Point in Office 2010.  When on battery Power Point slide shows won't advance through the slides, it just stops and won't move to next slide on keypress or mouse click, on mains power it works fine, I had a mess around with a users laptop that has the issue and installing Lenovo System Update and installing all the available updates and drivers solved the problem so I re-created the image on another X260 and the problem returned but now, installing Lenovo System update and all software & drivers doesn't fix the issue, this is on a clean install of Windows 7. when the slide show pauses I can press the Windows key and click Power Point and there is a little box that says Resume slide show, clicking this sometimes works and sometimes doesn't, all windows updates are installed, if I use an external keyboard and mouse it works OK, I've tried disabling all power management in BIOS and Windows, the only permanent fix I've found that works everytime is to disable Hardware Acceleration in Office settings but some of the docs users have are massive so don't want to cause any slowdowns or issues (plus it's anoying that I can't find another solution even though it worked on a users laptop) Anyone else seen this issue or have an idea of a fix Cheers

Read other answers
RELEVANCY SCORE 50.8

I try to connect my x260 to TV by HDMI but the TV doesn't recieve a signalI have installed de Intel Drive:

Read other answers
RELEVANCY SCORE 50.8

Hello! I have Lenovo x260 with windows 10 x64 (Build 10240) and wireless mouse Logitech MX Anywhere 2.After installing Lenovo updates mouse stop working. Now I can pair mouse, but it doesn't work. Reinstalling bluetooth drivers - also did not help.Bluetooth driver version - Intel 8260 Wireless Software for Bluetooth Technology for Windows 10 (64-bit) v.19.30.1648.920

Read other answers
RELEVANCY SCORE 50.4

I have a Thinkpad X260 and a Sierra Wirless AirPrime WWLAN card.  When the card is installed the system fails to boot an Operating system throwing an error: 1802: Unauthorized network card is plugged in - Power off and remove the network card.  System is halted. The Box for the WWLAN card has Lenovo's Tape Seal, and a Lenovo FRU label/number.  The compatibility matrix says this card is compatible.  Please help. Notebook Details: * UEFI BIOS Version: R02ET50W (1.23) * Embedded Controller vserion R02HT29W (1.11) * Machine Type Model: 20F6CT01WW WWLAN Details: * FRU P/N: 00JT542 * Model: EM7455

Read other answers
RELEVANCY SCORE 44

I have a Lenovo Thinkpad x61s with a docking station. Is there any way that I can disconnect it from the dock without turning it off?

Thanks.
 

A:Undocking w/o turning off

You can for USB docking ports
Usually by clicking "disconnect" on the connected USB device icon near your system clock

But for the ones mounted at the back (or underneath) and usually clipped in. No
 

Read other 1 answers
RELEVANCY SCORE 43.2

Running into an issue where the machine completely powers down after undocking.  Drivers have been updated, battery has been swapped out and so has the docking station. Just curious if this is a board issue or a larger concern.  Any insight would be appreciated. Thanks, NALIT

Read other answers
RELEVANCY SCORE 43.2

Hi All, I have a T440s in an Ultradock with the monitor closed and three external monitors connected (1 HDMI, 1 DVI, 1 VGA). Everytime that i undock the laptop and open the display, the display stays black.  This doesn't seem to happen if i put the laptop to Sleep, undock the laptop, and then turn the machine back on.  The only solution after undocked is to do a hard shut-off (losing any open data) and then turn the laptop back on. I've used the Lenovo Updates and Drivers application as well as the support website to validate that the Intel HD Graphics drivers are on the latest version. Any help is appreciated!  

A:T440s Display off when undocking

Hi Fightnaggie08,
 
Welcome to Lenovo Community Forums!
 
I?m sorry to hear that you are facing the issue with Display issue on ThinkPad Ultradock with ThinkPad T440s.
 
Regarding this issue I suggest you to check with updating the ThinkPad Ultradock firmware to resolve the issue.
 
Please click here to visit the link to know the steps on how to perform the firmware update.
 
Hope this helps. Do post back if issue persists!
 
Best regards,

Hemanth Kumar

 




Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Follow @LenovoForums on Twitter!

Read other 9 answers
RELEVANCY SCORE 43.2

On http://www.xbitlabs.com/articles/mobile/display/a4-roundup-2_33.html I can read

"The docking station is connected via Toshiba?s exclusive connector. It is very handy that you can disconnect the station ?on the fly?, i.e. without powering the notebook down. To do so, you should use a special lever and look at the indicator ? when it goes out, the station can be undocked."

but the manual tell you to turn off computer before docking and undocking.

What is the right, can you do hot docking or not???

A:Libretto U100 hot undocking

Hi

Well, I don?t know exactly how to handle the undocking procedure on the Libretto but a friend of mine uses a Tecra with a docking station and he don?t turn off the notebook for undocking the notebook.
But maybe it?s is another case on the Libretto.
I would recommend following the guideline the user manual and turn-off the notebook if you want to remove the docking station.

You are on the safe side if you will follow the instruction in the user manual.

Read other 1 answers
RELEVANCY SCORE 43.2

Hi,

I work in the helpdesk and am having trouble resolving an issue for a co-worker. I asked him to best describe the issue and here is his response....

"I will undock it from my desk, close the lid,take it to a meeting where it?s left undocked and unplugged, open the lid, andit?ll bluescreen within a few minutes of the screen coming back up"

Its a Lenovo T430 running Windows 7 (32 bit) and SP1. There is no minidump folder in the Windows directory (I followed the tutorial on how to create one but it still doesnt create one). I ran the System Update and updated the drivers that were available. I am not sure what else to try here.

I have had past success resolving issues by getting help from the gurus on here, so if you might have a suggestion on what to try, please let me know. Any help is greatly appreciated.

Thanks,
Kevin

A:BSOD when undocking laptop

Hello Kevin mate it seems like that machine has a real problem if it is not giving up those dump files.

If you haven't already can you run these for starters

http://www.sevenforums.com/tutorials/1538-sfc-scannow-command-system-file-checker.html

http://www.sevenforums.com/tutorials/433-disk-check.html< if necessary include the /f and /r in the command line as per Option2
then these if no go

http://www.superantispyware.com/

http://www.malwarebytes.org/products/malwarebytes_free/

http://www.bleepingcomputer.com/download/adwcleaner/

ADW download from bleeping computerdelete any rubbish found with the malware scans

(with ADW ifyou are running Kaspersky it will throw it up as malware just overrideKaspersky by ignoring it or disabling it for the duration of the scan)

Read other 1 answers
RELEVANCY SCORE 42.8

I used to use ThinkVantage's Access Connections to manage my network connection profiles on my Thinkpad. I just recently uninstalled it because I decided to just rely on the Vista has natively.

Since our office requires static IP, I set that up at the LAN properties.

Everything works fine when I start from a clean boot. It's when I undock and redock to the docking station that problem starts.

I lose the static IP configuration. Instead Vista assigns:
IP: 169.254.77.37 (supposed to be 10.11.2.xxx)
Subnet: 255.255.0.0 (supposed to be 255.255.254.0)
Gateway: blank
DNS: correct

I now find myself having to do a reboot everytime I just need to undock and go to a 30 minute meeting when I used to be able to undock and redock without any problems whatsoever.

Why does Vista assign this random IP when it is hard configured?

How can I solve this problem?

Thanks.
 

A:Vista loses IP config when undocking

I suggest re-installing the working solution, perhaps that's why it's there.
 

Read other 1 answers
RELEVANCY SCORE 42.8

Hello all. We are seeing this issue on a handful of T440's. When the user has the laptop docked and hard wired his network drives are connected and accessable. When they undock the laptop the drives is still showing but when they try to open any home drive folders they get the error " This file is currently not available for use onthis computer". The users are connected to our network wireless before they undock so it would seem that the connection to the home folders would still be there. Any help would be great. thanks, Matt

Read other answers
RELEVANCY SCORE 42.8

Could someone please explain to me why I cannot get an ip or connection when I plug my ethernet cable directly into my laptop. I usually use a docking station. However, I have security issues so I thought I would see what happened when I undocked.

Also, when I am docked I get an ip address for a linksys router as an IP. I don't have any wireless routers connected and the radio on my machine is disabled. Any ideas?

A:no ethernet after undocking and connecting to laptop

I am not sure of the connection between security issues and undocking! But have you tried re-docking the laptop to see if internect connection is re-established, assuming it was working before you undocked??

while undocked, have you checked Device Manager to see that the network adapter was present and had no driver issues.?? also did you click on Start >Settings> network connections to see that the Local Area Connection was listed with a red X on it??

Read other 1 answers
RELEVANCY SCORE 42.8

A user of mine is telling me she gets a BSoD often when she wakes up her laptop from sleep, or if she tries to undock it. My free tools for analyzing the dump file aren't giving me anything useful, so I figured I'd post it here in case someone with better tools would give it a shot.

Thanks!

A:BSoD when coming out of sleep or undocking

I've just had a quick look and the dump is blaming memory corruption, it would be worth doing some memory tests while you wait for the BSOD folks to take a good look at the dump.

RAM - Test with Memtest86+


Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 7A, {c0415e08, c0000185, 46c58860, 82bc15f3}

GetPointerFromAddress: unable to read from 82b74830
Probably caused by : memory_corruption

Followup: memory_corruption
---------

1: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

KERNEL_DATA_INPAGE_ERROR (7a)
The requested page of kernel data could not be read in. Typically caused by
a bad block in the paging file or disk controller error. Also see
KERNEL_STACK_INPAGE_ERROR.
If the error st... Read more

Read other 3 answers
RELEVANCY SCORE 42.8

Hi, I have a User that is being disconnected every time she undocks. It remains disconnected for about 5 mins, unless she reboots and it connects straight away. The Dock is connected via a Ethernet cable, would this override the WiFi connection whren docked? If so would this then when she undocks it has to restart the adadpter and reconnect to the WiFi? If so is there a way to disable this feature?SpecsX250 Thinkpad40A0 basic dockO/S windows 7 enterprise 32 bitIntel Duel band Wireless AC 7265 adapter Thanks in advanceSU91

Read other answers
RELEVANCY SCORE 42.8

used to use ThinkVantage's Access Connections to manage my network connection profiles on my Thinkpad. I just recently uninstalled it because I decided to just rely on the Vista has natively.

Since our office requires static IP, I set that up at the LAN properties.

Everything works fine when I start from a clean boot. It's when I undock and redock to the docking station that problem starts.

I lose the static IP configuration. Instead Vista assigns:
IP: 169.254.77.37 (supposed to be 10.11.2.xxx)
Subnet: 255.255.0.0 (supposed to be 255.255.254.0)
Gateway: blank
DNS: correct

I now find myself having to do a reboot everytime I just need to undock and go to a 30 minute meeting when I used to be able to undock and redock without any problems whatsoever.

Why does Vista assign this random IP when it is hard configured?

How can I solve this problem?

Thanks.

A:Vista loses IP config when undocking

Are you performing the undock as described in Windows Vista Help: Dock or undock a mobile PC?

Read other 9 answers
RELEVANCY SCORE 42.8

HiI have massive problems here with my setup:2 screens connected to WiGig 40A6. 1 HDMI, 1 DPX1 Yoga 1st Gen (20FQ) freezes every time when I undock. Freeze means: only possible way to get out of this is the power button. It seems, that it is not always the same:Worst case is, if both screens are connected. Then it freezes at every undock.A bit better is, if only DP is connected.A lot better is, if only HDMI screen is connected. I tried a fresh Win10 64 Bit install with all windows updates.I tried with the drivers on the X1 Yoga site at lenovoI tried with newest drivers for WiGig, from Intel, with newest driver for Intel HD graphics 520 from IntelI tried with older driver for Intel HD graphics 520 from X1 Yoga site at lenovoI did not find any working configuration. Undocking (and also rebooting, or shut down) is not possible without freeze. Does a working  configuration exist?Thank you for any suggestion!Roger 

Read other answers
RELEVANCY SCORE 42.8

When I come to work I dock my laptop, lid closed, press the power button on the dock and after a few seconds I'm ready to work. When I leave for home I undock and put in my bag. It takes me an hour to reach home during which time the laptop is in my bag, not being used. When I get home it is hot since it didn't go into sleep. At home when I leave it for a while, it goes to sleep (plugged is 15 minutes or unplugged 30 minutes) 1. Why won't it go to sleep after I undock?2. Why won't it go to sleep after an idle timeout wake timers are disabled when unplugged and powercfg -requets shows an empty list. How do I fix this situation? I know I can undock, open the lid (wait for it to come on), then close again, but this is tedious and a lot of times I'm in a hurry and forget. 

Read other answers
RELEVANCY SCORE 42.8

Hi folks, I've just gotten a new laptop at work (Dell E7270 - Windows 7 Pro 64-bit) and every time I undock it I get the BSOD. I've trained myself to make sure nothing is open when undocking but have a been burned a few times, where I lost open files.

Hoping someone can lead me in the right direction to get this resolved.

Thanks in advance.

Read other answers
RELEVANCY SCORE 42.8

Hello,

I have had this problem with both the RC and the RTM builds of Windows 7 Ultimate x86 on two different Dell laptops--a Latitude D830 and a Latitude E6500. Both are running nvidia Quadro display adapters (the D830 is a Quadro NVS 140M and the E6500 is a Quadro NVS 160M). In the case of the D830 I am running the latest drivers from nvidia's site (Dell didn't post Win7-specific drivers for this laptop). For the E6500 Dell has posted Win7-compatible drivers on its support site for the NVS 160M so that is what I'm using there.

In any case here is the issue. I install Win7 on the laptop and install the video drivers... native rez on the laptops is 1900x1200 (WUXGA). Aero glass is enabled and all is well and good.

I then take the laptop and connect it to the Dell-specific docking station (the D/Port in the case of the D830 and the E/Port for the E6500). In both cases there is an external monitor connected via DVI that also has a 1900x1200 native rez. The laptop lid is closed and the laptop is in suspend/sleep mode when docking.

Once in the docking station I power the laptop back on (it resumes from sleep) and then it goes about detecting the presence of the dock and the attached peripherals. The welcome screen comes up on the external monitor and I type in my password to get back to the desktop.

The only problem is that aero is now disabled (the taskbar and window borders are now opaque and aero peek no longer works, etc.). I have looked all over the net and tried ... Read more

A:Aero turning itself off when docking/undocking

I am actually running into a very similar issue. If I try to use Aero Peek with two HD resolutions Aero Peek will disable itself. If I do a monitor that is mirrored Aero Peek works fine. I also have a Dell Latitude E6500. Have you found a resolution to this issue?

Read other 3 answers
RELEVANCY SCORE 42.8

The August 3rd Troubleshooting guide says in order to undock you must "Click the Safely Remove Hardware icon in the notification area, at the far right of the taskbar".  Where is that icon?  I have the Thunderbolt icon, but it does not offer any remove option.  The link is:http://h20565.www2.hp.com/hpsc/doc/public/display?sp4ts.oid=11122586&docLocale=en_US&docId=emr_na-c0...In that same document it links to the Zbook dock white paper (4AA6-5088EEW) which says to just pull the cable out, "When removing the HP Elite Dock with Thunderbolt 3 or HP ZBook Dock with Thunderbolt 3 from your HP notebook or HP ZBook Mobile Workstation, it is recommended to unplug the dock first, wait until the Thunderbolt icon (see Figure 3) in the system tray is gone, and then put the notebook or mobile workstation into Standby, Hibernate, Restart or Shut-down state".Which one is correct?

A:Zbook Dock: Proper Undocking

Hi, Safely remove will remove the thunderbolt icon therefore you have to remove the dock first. Please click the arrow up, you should be able to see remove hardware (USB, Thunderbolt ....).                      Regards.

Read other 4 answers
RELEVANCY SCORE 42.8

Hi, I have a User that is being disconnected every time she undocks. It remains disconnected for about 5 mins, unless she reboots and it connects straight away. The Dock is connected via a Ethernet cable, would this override the WiFi connection whren docked? If so would this then when she undocks it has to restart the adadpter and reconnect to the WiFi? If so is there a way to disable this feature?SpecsX250 Thinkpad40A0 basic dockO/S windows 7 enterprise 32 bitIntel Duel band Wireless AC 7265 adapter Thanks in advanceSU91

Read other answers
RELEVANCY SCORE 42.8

specs of my pc
gigabyte uefi motherboard 
intel dualcore processor
2 gb ram
1TB Toshiba HDD
asus DVD RW
logitech k100 usb keyboard
logitech usb mouse
past weeek my windows afftected by virus and  it become slow i decided to format and perform a clean install
i inserted my win7 cd and selected dvd for booting. it showed PRESS ANY KEY TO BOOOT  FROM CD/DVD...
i pressed enter twice but nothing happend my old win7 started to log on screen 
i thought it was an cd problem i tried another cd and usb stick it wont work. i tried the cd on my friends lap and it worksi changed boot options related to keyboard legacy its looks perfect but wont work
i resetted bios with cmos battery and loaded optimized settings then boot
i have tried ps2 keyboard it wont work

PLEASE HELP ME  

Read other answers
RELEVANCY SCORE 42.8

As I wrote in the title, my Shift and Alt keys stopped working for keyboard shortcuts. However, the Shift key still works when capitalizing letters.

I've been dealing with this problem off/on for the past two weeks and haven't been able to figure it out. I've gone into Ease of Access features and turned on/off all of the available options (Mouse Keys, Sticky Keys, Toggle Keys, Filter Keys). I've pressed Shift for 8 seconds, and pressed it 5 times, and still haven't been able to correct it.

Thank you in advance for any help offered.

Possibly helpful additional information:
I've got a Spanish/Latin American keyboard layout installed in addition to the US English keyboard layout. I toggle back and forth with Left Alt + Shift (which is how I noticed my Shift key stopped working).
I play a game whose controls rely on a lot of Shift key pressing and holding.

A:Keyboard - Shift & Alt keys stopped working for keyboard shortcuts

When was the last time you used a can of air cleaner on the keyboard? If it isn't from contact wear often keyboards tend to get loaded up with dust and debris!

One example of that is having any snacks onhand around a pc where little bits get passed along from your fingers onto and under the keys themselves. Keyboards are known to get loaded up fast with any foods present!

Read other 4 answers
RELEVANCY SCORE 42.4

Hi community, we are using several Thinkpads for years mostly without issues. But for a while now we have to experience issues with our T540p's in combination with pro and ultimate docks. And lately we also run into the same issue with a T570.Here our configuration, there are two external displays connected to the docking and one of them is the primary screen.And this is the issue: When we undock the T540p, the internal display should switch to be the primary and only display, but it doesn't. It seems to be that the T540p is still thinking to have external displays connected. The internal display is all black but I can move the mouse pointer from the right into the screen and can also move it out of the screen by pulling it downwards.All windows are opened on the virtual screen,which means I cannot see any configuration windows to change display behavior. Pressing Fn+F7 and up or down arrow blind does not change anything.It does not matter if I undock the T540p while it is running, or if I shutdown the system before undocking. When this error occurs it also does not matter if I connect an external display to the T540p directly, I still cannot see anything. To set the internal display to be the main display before undocking does not change the behavior anyway.If I put the T540p into the docking again, mostly everything is fine. The two external displays are running as before. If it was a desktop PC that would be fine but it is a notebook and we need to carry it with us an... Read more

Read other answers
RELEVANCY SCORE 42.4

Hello folks.... I have a Lenovo W540 which has a simple problem that is frustrating me to no end. Whenever I undock the laptop, or bring it out sleep, the screen remains blank. I end having to put it back in the dock (or RDP to it), which allows me to view the screen content on the external monitors. I have updated all the drivers using the Lenovo driver app, and even applied the docking driver update. Nothing seems to help. I've searched the forums, but all that I have found is a suggestion to downgrade the video driver, which I dont really want to do. Anybody else have this issue? Any ideas? Thank you!! //EDIT to add that this is Windows 8.1. Important information   

A:W540 - Blank screen after undocking/sleep

Exact same problem here. It looks like the only way to brink the device's lcd back is to boot the machine. Then it will work until the next time it falls a sleep while docked.I'm running Windows 8.1 with latests drivers.

Read other 9 answers
RELEVANCY SCORE 42.4

I have encountered an issue with the volume control on my T460S that occurs when I remove my thinkpad from the docking station hot.  The volume control goes all glitchy, flickering between ON and MUTE rapidly and popping the volume monitor (pictured) up in the top left of the screen on top of everything.  Hitting <Escape> briefly dismisses it, but it comes back randomly.  When I return the laptop to the docking station (hot) the problem goes away.  I've checked the Realtek driver, and it appears to be the most recent one.  Any ideas?   Windows 10Pro, T460s 

Read other answers
RELEVANCY SCORE 42.4

Anyone know of a solution for this? Almost every time I undock or re-dock my laptop after a meeting, something will be unresponsive, i.e. my Ethernet cable will fail to be detected or my wired keyboard becomes unresponsive. This is generally solved by a reboot (reseating the cable to the device that is failing has not generally worked), but I don't think this is necessary to solve the problem each time. I am still needing to look at things such as drivers (knowing that Windows 10 has its own method of fetching compatible drivers over HP Support Assistant or what's offered through the site). Specs: HP Zbook 15 G2Inten 6th gen I7 Processor16 GB RAMWindows 10 Professional 64-bit  Hardware attached to docking station:Wireless MouseWired KeyboardEthernet CableVGA cable to Samsung Syncmaster BX2431Power Cable

Read other answers
RELEVANCY SCORE 42.4

Hi All,

My laptop had a blue screen and keyboard stops working as well, I plugged the external keyboard and re-install the windows, now half of the keys are working and half dosent.

I am wondering has the kyboard damaged, I am also not sure if the I replace the keyboard will it work?

is there any settings in bios or any utility can fix the problem, could some one please advise?

Thanks
Nysoh

A:Keyboard stops working - USB external keyboard is fine

Hello Nysoh

On this virtual way nobody can say for sure what the problem is but if the internal keyboard is not working properly first step is keyboard replacement. If the problem still persists then troublemaker can be keyboard port or keyboard controller.

As far as I know BIOS has nothing to do with this issue.

Read other 5 answers
RELEVANCY SCORE 42.4

I had a problem with my laptop which is certain key on my keyboard is not functioning. The weird is, it happened without a reason. because after I shutdown doing my work when I turn it on again, I discovered my "s", "d", "g", "h", "\", "m", " left shift", "caps lock" and "~" key did not work at all. I try taking the key off, cleaning underneath, but nothing seems to be working. After that I try to use usb keyboard and it seems the key can be entered. So I thought my hardware is the problem. than I replace into the new one, but still having the same problem. I already waste my money buying new keyboard. Does any one happen to know what sort of problem this is and how I would go about fixing it? Is it related to the registry. My laptop is Acer aspire 4740G, ram 4GB, processor i3 2.4GHz. I hope someone can help me to solve this problem.
 

Read other answers
RELEVANCY SCORE 42.4

Hi,
I'm having problems with my All-in-One Keyboard on Windows 8.1(64 bit): it doesn't accept input both from keyboard and touchpad at same time (can't walk in a FPS game while looking with mouse, for example).
Is this a product's limitation or should it work?

Thanks

Read other answers
RELEVANCY SCORE 42.4

My husbands ASUS touch screen laptop-keyboards are not working. I know it has windows 8. Core i3 intel inside. Like I said it is a touchscreen and neither the hardware keyboard or touch screen keyboard will do any thing (well it is like the computer understands i am doing something with the keyboard, but not typing. Ex. i will type and the curser line will do nothing but suddenly go like an italicized line. The mouse works and the touch screen works but I cannot type anything. I have wiggled the keys thinking maybe something is stuck but no help. also I have restored it to its factory settings thinking maybe he accidentally set some keyboard sleep command or something. We are both not smart at this, and again it is not my computer, he has it for work, so who knows what he did to it. But yeah, after restore it still wouldn't work and now I am stuck at the registration "getting started" windows and I cannot bypass them....or don't know how to without being about to type. The last it worked he said he cleaned it with pressurized air, so I don't know if that was too much for the keys...if he actually blew dirt into it, or what strange thing could have happened...but the fact that both touch screen and actual keyboard aren't working I am left stumped. I hope I gave enough information on the computer. It has that surface windows...he normally just uses the desk top mode. Ok thank you for any advice.
 

Read other answers
RELEVANCY SCORE 42.4

Big problems, so i just recently got a new keyboard, the commander multilight combo,
fresh out o
f the box, and as you can see, when I press
f, or enter
f, it types the letter
f, and spaces it automatically, i've tried everything and i need help. i don't know what possibly could have gone wrong, but it's not working, and on top o
f that, the le
ft shi
ft key is not working like it should be so I now have to use the right shi
ft key to capitalize, someone help please! sorry
for the terrible grammar and such, i cannot help it at the moment until this is
fixed..
 

Read other answers
RELEVANCY SCORE 42.4

Hi guys, Something really strange started happening two days ago. Out of the blue the following keys stopped working: GHBackspaceWindows [email protected]' The laptop is a couple of years old and a bit dusty, so I took it to the local shop to get the keyboard replaced and cleaned. Seemed to be working fine when I left the shop. Then, a little while ago the space key and P stopped. Five minutes later they started working again but ctrl stopped and N is temperamental. I haven't spilt anything on it or knocked it. Any ideas what's going on?

Read other answers
RELEVANCY SCORE 42.4

I've had my desktop for a few years and never had a problem.  Just recently, it has started showing a Keyboard Error message on a black screen when I boot it up.  The wireless keyboard and mouse do not work, although it appears to boot up correctly.  Since I have a password on my computer, I cannot log in or do anything.  When this happens, I've rebooted 2-3 times, and it the keyboard and mouse will finally start working.  I have moved the toggle to different USB ports and this does not appear to make a difference.  How do I prevent this from happening?

Read other answers
RELEVANCY SCORE 42

I have a Dell 7737 laptop and from time to time it develops a firmware glitch where random keys stop working for both BIOS Setup and Operating Systems. After such thing happens neither shutdown (Full shutdown / Fast Boot disabled) nor restart get the keyboard back to a normal state. At this point the only workarround is to disconnect the AC power cord and then either drain the battery or physically remove it.
This laptop's battery cover is not designed for daily removal and it is starting to get loose because of this BIOS bug.
I am running BIOS version A14 but this bug was present since I purchased the laptop with BIOS version A07. Sometimes I cannot even type my password because the random keys that stop working match those it uses.
Please Dell could you provide a BIOS hotfix for this annoying issue? 

Read other answers
RELEVANCY SCORE 42

Okay, this a fairly new one as I cannot find a single documented instance of this on the entire internet.....

Hardware - T60 thinkpad
OS - WinXP
512MB RAM
Accessories - Docking station

I've deployed about a hundred of these things and this is the first time I've seen this message.....(not verbatim)

"The undocking sequence cannot continue because the print spool service needs to be stopped."

???????

Fair enough, but I can't tell my user to keep going into the computer management services to turn the service on and off. My boss would kill me.

Has anyone ever heard of anything like this? My final resort would be to re-image the thing (as also suggested by IBM themselves). The problem is that would be a major hassle as this guy is an attorney and always on the run.

Any and all suggestions will be entertained....even the ones involving alchemy.
 

A:Lenovo T60 - Undocking halted by print spooling service??

Disconnect the printer, and then what happens?
 

Read other 5 answers