Over 1 million tech questions and answers.

Partição de backup do Lenovo G470

Q: Partição de backup do Lenovo G470

Read other answers
RELEVANCY SCORE 200
Preferred Solution: Partição de backup do Lenovo G470

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

RELEVANCY SCORE 64.4

Hi, recently i just found my old laptop -G470. I need a laptop to do what my pc can do , so when Im not home i can bring the laptop out. What i need is i can photo editing and video editing without any hiccups in the between. Is it possible to upgrade my G470 to what i need or I should just go buy a new laptop. Anyone can help me out here ? Just give me the best hardware that compatible with G470.Thanks in advance.

Read other answers
RELEVANCY SCORE 64

Hello, I have a Lenovo g470, and I was wondering if it would be possible to get an Ivy Bridge processor. The manual says the following ones are compatible: Intel I7-2620M 2.7G 4M 2c J1 PGA processor CPU.Intel I5-2540M 2.6G 3M 2c J1 PGA processor CPU.Intel I5-2520M 2.5G 3M 2c J1 PGA processor CPU.Intel I5-2410M 2.3G 3M 2c J1 PGA processor CPU.Intel I3-2310M 2.1G 3M 2c J1 PGA processor CPU. But as it Ivy Bridge are backwards compatible with SB, I wonder if I could get a 3 processor and put in this mobo. If not, does it worth to change from i3 2310m to anyone of these above?? i5 2540m has 200mhz higher clock on gpu and i7 has more l3 cache(4MB), or should I just leave like this?? I appreciate any help. Thank you.  (Sorry for my bad english)

Read other answers
RELEVANCY SCORE 64

hi,

it takes almost 15min to boot windows 7 32bit clean installed window.after that some time works fine but most of the time when i open or close some window, it’s open like in slow motion but task manager shows ok(cpu0to5%ram36%of2GB without any background).I have spare fully working HDD so replaced but problem is same ,even BIOS is hanging.i have tried lenovo provided tool to test system and it shows all ok. cd/rom,wifi card and hdd is tested physically.ram is tested by memory diagnostic tool only.

need help!!!

Read other answers
RELEVANCY SCORE 64

Hello! Recently I upgraded my G470 notebook into win7, and my wifi is not working, the button is turned on and I installed the driver in the lenovo support center, I also installed the Energy Magagement program and etc, but when I press Fn + F5, the only thing that appear is the Bluetooth connection, which is turned on, but my wifi does not show there, and also, it does not show in the Device Manager... What can I do?It is enable on the BIOS as well.

Read other answers
RELEVANCY SCORE 64

I encountered the BSOD with the problem about atikmpag.sys It seems like I made a wrong choice about deleting it, (solution from internet searching)  and now the Display Adapters doesn't work anymore as you can see in the pictures  after deleting the atikmpag.sys during safe mode, It somehow resolved the problem about the BSOD and my laptop are finally starting properly now the problem is about the resolution, it's not the same anymore, it's too low and somehow the screen is blurry, as you can see at the Graphics section, the maximum resolution I can only choose is 1024 x 768, which is supposed to be 1366 x 768 (HD) if i'm not mistaken,   I need your help on how to fix this I hope i can turn it back to normal., I don't have a CD installer (if it is supposed to have one) to re-install it, and about downloading from other sites I'm a little bit concerned about that so I haven't tried it yet.. and it seems like Lenovo has its own installer... Pls help ASAP













Solved!

Go to Solution.

A:Lenovo G470 atikmpag.sys problem

hi jm9327,
 
Welcome to the Lenovo Forums.
 
The G470 with a dual GPU (Intel+AMD), uses a muxless driver (this is a custom driver that switches the discrete AMD Graphics to the Intel Graphics to save power). If you have installed a different driver, this may cause system instability (including BSOD).
 
If you're running on Windows 7, try the following::
 
1. Follow this guide on how to disable automatic driver installation.
2. Install these drivers in order (reboot if necessary)
   (1st)  - Intel Onboard Graphics Driver for Windows 7 (64-bit)
   (2nd)  - AMD Video Driver for Windows 7 (32-bit, 64-bit)
 
When finished, check if the yellow exclamation marks are gone under Device Manager > Display Adapters and observe the screen resolution adjustment and BSOD occurrence.
 
 
Let me know how it goes.
 
Regards

Read other 7 answers
RELEVANCY SCORE 63.2

hey, i have an Lenovo g470 laptop with windows 7 Home Basic, Service pack 1, 64 bits and the webcam wont work. when i start up cyberlink youcam, it says: "Warning, No webcam detected. Try plugging in a webcam into your computer now. If you are using an integrated camera, make sure that it is turned on". It worked when i first got my computer for a few months, then it stopped. I havent used it for a few months because of this problem. Please help me! Any help is appreciated, thanks!
 

A:Lenovo g470 integrated camera not working

welcome to TSG.

Please do not create duplicate posts for the same issue. Closing thread, please respond at the one in hardware.

http://forums.techguy.org/hardware/1052268-lenovo-g470-integrated-camera-not.html

thanks,

v
 

Read other 1 answers
RELEVANCY SCORE 63.2

There's always a pop-up message that my Lenovo D: drive is almost out of space, I clicked it, cleared recycle bin, but nothing happened still, I manually checked on the drive but I'm afraid to delete these folders such as applications, drivers, etc.. please help me to resolve this... I would really appreciate your response..
 

A:How to free space on my Lenovo G470 drive D:

What is on the "Lenovo D: drive"?

Please attach a screen shot of the Disk Management window, as that sometimes helps us understand your issue. If you need help with that see TSG Posting a Screenshot. FWIW to take screen shots with Windows 7 or Vista I prefer to use the built-in Snipping Tool.
 

Read other 1 answers
RELEVANCY SCORE 63.2

Here i comes again for another problem and need another solutions.

Why everytimes i plug-in the AC it only charge 50% batteries..That the max..

so is it normal? or any problem to my lenovo? before this it charge 100% but after i install new windows 7 ultimate it only charge 50%...please help~

sorry for my bad english~ ASIAN PEOPLE BAD AT ENGLISH

A:Batteries Charge only 50% for Lenovo G470, is it normal??

Which version of Windows you have shouldn't affect how your battery is charged up so it's probably just coincidence.

You may be needing a new battery. Do you have anyone nearby who can check the battery for you?

Your English is better than my non-existent Malaysian!

Read other 9 answers
RELEVANCY SCORE 63.2

hey, i have an Lenovo g470 laptop with windows 7 Home Basic, Service pack 1, 64 bits and the webcam wont work. when i start up cyberlink youcam, it says: "Warning, No webcam detected. Try plugging in a webcam into your computer now. If you are using an integrated camera, make sure that it is turned on". It worked when i first got my computer for a few months, then it stopped. I havent used it for a few months because of this problem. Please help me! Any help is appreciated, thanks!
 

A:Lenovo g470 integrated camera not working

Read other 9 answers
RELEVANCY SCORE 63.2

As the Title says.... I have a 5 year old Laptop Lenovo G470 with a switchable graphicsIntel HD Graphics Family 3000 (which win 10 reads it)AMD Radeon HD 6300M series (which win 10 reads it) or "6730M" The Problem is everytime i try to install the AMD its causes BSOD when playing games and stop responding error when trying to watch videos....it works fine alone with just Intel HD Graphics Family...I tried:Installing 1st Intel before AMD in a fresh format (Which i read about the issue about AMD)....= Still having BSODInstalled latest drivers for AMD... = Still having BSODDid try to find to downgrade BIOS if thats the case = Failed didnt find lower BIOSdid the atikmpag.sys thingy... = caused me more trouble since it does not go to start windows so what im having now is just my Intel HD working... can someone help me with this issue... im not really that techy guy but i do know how to follow instructions

Read other answers
RELEVANCY SCORE 63.2

Hello guys, I try to be detailed as possible in this problem. While watching a H264 MKV AAC video using mpv using this parameters:mpv --vo=opengl-hq:lscale=lanczos3:cscale=lanczos3:dither-depth=auto my computer suddenly blue screen with this dump. [download here : http://1drv.ms/1ujkdR4], summary detail of BSOD(Nirsoft BlueScreenView): -- SOF OF BSOD --A problem has been detected and Windows has been shut down to prevent damageto your computer. The problem seems to be caused by the following file: atikmpag.sysSYSTEM_THREAD_EXCEPTION_NOT_HANDLED If this is the first time you've seen this stop error screen,restart your computer. If this screen appears again, followthese steps: Check to make sure any new hardware or software is properly installed.If this is a new installation, ask your hardware or software manufacturerfor any Windows updates you might need.If problems continue, disable or remove any newly installed hardwareor software. Disable BIOS memory options such as caching or shadowing.If you need to use safe mode to remove or disable components, restartyour computer, press F8 to select Advanced Startup Options, and thenselect Safe Mode. Technical Information:*** STOP: 0x1000007e (0xffffffffc0000005, 0x000000000000ff00, 0xfffff880031af8d8, 0xfffff880031af130)*** atikmpag.sys - Address 0xfffff88004011b1a base at 0xfffff88004000000 DateStamp 0x4ff4eb9e--EOF OF BSOD -- After my unit restarts, the drivers is gone and display "Standa... Read more

A:[Help] Lenovo G470 video card problem.

Adding property (based on details):Hardware Ids:PCI\VEN_1002&DEV_0000&SUBSYS_397517AA&REV_00PCI\VEN_1002&DEV_0000&SUBSYS_397517AAPCI\VEN_1002&DEV_0000&CC_030000PCI\VEN_1002&DEV_0000&CC_0300Driver node strong name:display.inftd.Mfg.NTamd64:vga:6.1.7600.16385ci\cc_0300

Read other 9 answers
RELEVANCY SCORE 63.2

hey, i have an Lenovo g470 laptop with windows 7 Home Basic, Service pack 1, 64 bits and the webcam wont work. when i start up cyberlink youcam, it says: "Warning, No webcam detected. Try plugging in a webcam into your computer now. If you are using an integrated camera, make sure that it is turned on". It worked when i first got my computer for a few months, then it stopped. I havent used it for a few months because of this problem. Please help me! Any help is appreciated, thanks!
 

A:Lenovo g470 integrated camera not working

welcome to TSG.

Please do not create duplicate posts for the same issue. Closing thread, please respond at the one in hardware.

http://forums.techguy.org/hardware/1052268-lenovo-g470-integrated-camera-not.html

thanks,

v
 

Read other 1 answers
RELEVANCY SCORE 62.4

i has been bougth lenovo g470 friend's. with specs core i3.does the g470 I bought do not have dual graphics with AMD radeon?,because every i install amd driver, always failed.i check specs on google all article says it have a dual graphics.

Read other answers
RELEVANCY SCORE 62.4

After spending an inordinate amount of time searching the internet about my problem, and then contacting Lenovo (who told me it was hardware and I needed to return all of the laptops I bought), I managed to magically find the solution to my problem.  Since it wasn't documented elsewhere on the internet, I thought I'd create a post for it here. The problem I was having was that my Lenovo G470 laptop did not display Press F2 to Enter Setup during the boot process, and because of this, no amount of hammering the F2 button would allow access to the BIOS.  I attempted all of the standard fixes, pulled the battery, held power down for 30 seconds, removed the HDD -- nothing would cause this to appear.  Since it was happening on all 3 of the G470s we just purchased, I didn't believe it was hardware.  I reached out to Lenovo Premium Support, and after about 3 minutes of discussion, "Paul" informed me that all three machines were defective and would have to be sent back in for repair, and it would take 4-6 weeks for repair and diagnosis.   As I had been noodling around with the machines for a few days, ONE of the three ended up showing the bios options during the boot process.  At that point, I had been hitting just about every single key on the keyboard during the boot process, so I couldn't identify what it was that I did that caused the options to appear.  A little more troubleshooting and I figured it out: Lenovo G470 machines equip... Read more

A:SOLUTION: Press [F2] to Enter Setup does NOT Appear - Lenovo G470

Now that's a slick solution.
 
Dave

Read other 9 answers
RELEVANCY SCORE 61.6

Please need help,

I can't found newest driver video card Lenovo G470 for Windows 7 Profesional 32bit

A:How to get driver Video Card Lenovo G470 with support Direct3D ?

You should be able to get updates from Lenovo support (Link below). In the Category drop-down select Video. In the Operating System drop-down select Windows 7. Choose the correct driver download for your video hardware.

Drivers and software - Lenovo G470 Notebook

Also, there's numerous other updates for your PC. You should browse the list.

Read other 1 answers
RELEVANCY SCORE 61.6

Hi there,              I am planning to upgrade my lenovo G470 series laptop.I am planning for 8gb or 16gb ram and harddisk 1Tb or 2Tb.Upto how much ram my laptop supports.?Should i buy two 4Gb ram or jus needed only one 4Gb ram(Not sure how many ram chip is inside 2 x 2gb or 1 x 4Gb)? Can i implement a SSD hard disk instead normal hard drive?.Will this upgrade will be supported by my laptop.Will it be worth it after all these years(6-7yrs)?How much will it cost in India for the above upgrade? thank you,Hari Sankar

Read other answers
RELEVANCY SCORE 46

i have already bought a newly used ideapad 700 not y700and it has 256 ssdone parition is called lenovo and does have 75 gigs of old windows and system files and don't know how was all of this formed but i need to delete all the files and leave only the backup files of lenovo. as u see in the images by order the folder is vms contains sp2013 folder contains sp2013.vhvx filewhen i open it it opens a new virtual parition called sys which contains old sys files and backup files which i don't know where exactlyiam sorry for the dark side of the images the cover if the ipad doesn't fit which made images so stupid  ???? 

Read other answers
RELEVANCY SCORE 44

Hello everyone. I have a Lenovo G470 laptop, i'm having few problems with wireless connection.Some months ago I was using normally my laptop and then I had a internet problem, so I tried to disable my adapter in network connections and then it has dissapeared from my connections.. Then I tried to look on Device Manager in Network Connections tab, my driver was gone.. I already tried everything.. Actually, I'm using Usb wi-fi for using internet on it and Lan cable. 1. Tried to reinstall my wi-fi driver.2. Tried to enable on bios.3. Installed Fn+f5 thing, ps: It only shows up Bluetooth... Also in Windows Mobility Center has no wi-fi to enable.4. Turned on wireless key in left side of laptop, no results.. 5. And last thing, reinstalled windows like 2-3 times, and still no wi-fi..  I really don't know what is happening with my wi-fi, I'm tired to search in a million sites for fixes and no one worked.. So I'm posting this if someone could help with this problem. PS: Sorry for bad english, my main lang is portuguese  

Read other answers
RELEVANCY SCORE 44

?hello. i have a problem here with my battery, the battery icon showed that 87% plugged not charging (i always set it in best battery health mode). but after i check it through lenovo energy management and it showed me a battery exhaustion notice. is the battery reset gauge feature can make it back to normal? 

Read other answers
RELEVANCY SCORE 44

so earlier today i started to get weird issues with video, the screen froze for a few sec then it blinked, tried to restart the game but started to get a notification about keeping it from getting acces to graphics hardware, restarting didnt help and instead of notifications i started to get BSOD, tried restoring the systm but didnt work, now everytime i boot with "Switchable Graphics" on the boot settings i never get video, after the windows 10 flag animation screens turns grey or black, with the fan turning on and off and the screen blinking (i can notice how it gets totally black and black with a backlight), only way to get access to desktop is turning "UMA Graphics" on startup, also reinstalling drivers didnt help

Read other answers
RELEVANCY SCORE 43.6

Hi!I'm having this problem.. mi G470 is showing video without almost any bright. I thought that the LED display was wrong so I replaced it, but the problem persists. Somewhere I read that there is a fuse on the motherboard that gives power to the display. Is this correct? Does anyone knows anything about this? (Windows starts normally, ?I can even login...)Any clue will help! Thanks!!

Read other answers
RELEVANCY SCORE 43.2

Greeting i updated the BIOS to lastest version, and the keyboard start to beep, the operative systems dont work fine, some keyboards have malfunction with the shift key, my keyboard is in spanish, with the english version of the keyborad the problem is solved. The motherboard in the notebook is ok, no conectors damage. PD: excuse my english i'm spansih native speakers

A:keyboard fail in g470 after BIOS update

Rickynet wrote:
Greeting i updated the BIOS to lastest version, and the keyboard start to beep, the operative systems dont work fine, some keyboards have malfunction with the shift key, my keyboard is in spanish, with the english version of the keyborad the problem is solved. The motherboard in the notebook is ok, no conectors damage.
 
PD: excuse my english i'm spansih native speakers

From what I understand  your notebook works fine when using English keyboard layout, but does not work as expected if you change to Spanish keyboard layout.
 
Check your BIOS for a language or region setting and adjust as needed.  Also - look in control panel for keyboard settings and install additional keboard layout for Spanish.
 
Good luck.
 
CB

Read other 3 answers
RELEVANCY SCORE 43.2

Hye..My Lenovo G470 laptop model 20078 is also unable to boot."BOOTMGR is missing" is written.Please help me?
 
Mod's Edit: System model added to the front of Subject line to improve visibility / clarity.
 

Read other answers
RELEVANCY SCORE 42.8

I have a Lenovo Z710 laptop(see spec's)and want to make a recovery USB and also setup a backup system. This is a new machine and I don't want to make a mess of it, so I wanted to get the best advice I could before I did anything to it.

I have a 32GB USB drive to make the Recovery on.
Lenovo refers me to this method to make a Recovery USB :Methodology to create Recovery Media and reload a Lenovo Think system with Microsoft Windows 8 preload

Is this a good way to do this or is there a better way ?

I also need to setup a backup system, what is the best program to use for this, paid or not ?

I have a 1TB HDD in an external enclosure with 3.0 USB cable to use for the backup's.

A:Lenovo backup

Yes, that way works and creates a bootable flash drive to use for recovery. I suggest you try booting it after you create it to learn how as you will have to disable Secure Boot and enable Emulation in UEFI setup.

Edit: Not true, see later posts

Read other 36 answers
RELEVANCY SCORE 42.4

Hello everyone. I installed W10 in a G470 Laptop (Lenovo) - Machine Type 4328. After 10 days it shows a blue screen, error 0xc00000034. I cannot even turn on the computer now. I have files inside that I dont want to lose. Is this a common issue with W10? What should I do? Thank you all. Maria
 
Mod's Edit: System model added to the front of Subject line to improve visibility / clarity.
 
 

A:G470 - Blue Screen error 0xc00000034 after Windows...

That BSOD stop code usually points to a problem with the Hard Drvie (HD) that is preventing it from booting.   If you have another computer running Windows 7, 8.1 or 10, you could Create a System Repair Disk that you can use to boot your laptop, and from the tools on the CD, run a chkdsk of the hard drive.   You can also use another computer to create download the Windows 10 install media directly from Microsoft, and use it to boot your system and attempt a repair, but if your HD is actually going bad, attempting any sort of repair may just make the chance of recovering your important data less likely. If you have data on the existing HD that you simply cannot bear losing, I would leave it off, and take the system to a good local computer shop and have them try to recover your data off the HD before attempting any sort of repair.    A good PC repair shop will be able remove the HD from your laptop, attach it to another computer, and attempt backing up your data off the old drive for you.    How to create a Windows System Repair DiscInsert a blank writable CD or DVD into your CD/DVD driveSelect  Start >> Run and type:  recdisc  and press enter.Select "Create Disk"Good Luck,     

Read other 4 answers
RELEVANCY SCORE 42

I have an older x220 thinkpad; when running backup it gave me an error message that there was not enough room (but there was plenty of room on the external drive!).  I made the mistake of deleting the backups from the external drive manually.  Now, it hangs up.  I thought perhaps deleting the backups showing in the system would force it to start over with a brand new backup instead of looking for the old ones; however when I try to delete the backups from the list in lenovo backup, it also hangs up.  I would like to find a way to clear all of the history out of the backup system so that it will start over with a new image (and work, of course).  Any ideas? 

Read other answers
RELEVANCY SCORE 42

I have just bought lenovo beacon. And I experience the problem with WAN sync/backupEverything works great via LAN, nothing works via WANI have my lenovo ID but still there is no possibility to access my device via WAN. Here is what I would like to have:1. I would like to have several folders local on my PC which are automatically synchronize with floders on my lenovo beacon2. It works great when I am in LAN3. It doesnt work at all in WAN Could you please write me how to configure it? What should I do to achieve the functionality of autosync when i am using my laptop anywhere outside my LAN? thank you in advance for helpSzymon

Read other answers
RELEVANCY SCORE 42

I want to back up my files to install win 8.When i already backed up previously,size of backup files are approx.9GB.
But now when i tried to back up again,size of files exceeding 25GB,which I Had not enough memory in another drive.
Willl it back up only my system files or total files in C Drive??
Can i lower the size of backup files,if so how??

A:Lenovo one key recovery backup memory

You really need to use an External Drive if you are going to use One Key Recovery ...

To utilize the features of the OneKey Recovery system, your hard disk already includes a hidden partition by default to store the system image file and the OneKey Recovery system program files. This default partition is hidden for security reasons, which explains why the available disk space is less than the stated capacity.

Read other 4 answers
RELEVANCY SCORE 42

Ok so i got my Lenovo thinkpad T510 about two weeks ago, and i noticed i had a lot of hdd space that i couldn't access. So i decided to do what my sister had done, delete the R&R partition that comes with thinkpads. after rebooting into windows i find that windows won't load and it said "This is not a bootable disk. Please insert a bootable floppy and press any key to try again"

The only think i did was delete a partition called "System_DRV"

I've been looking around and i found a thread on this forum that said all i would have to do is use the Startup Repair option, yet the laptop says "windows cannot repair this computer automatically"

Here is the tread that i found. Rescue & Recovery Creating System_DRV Drive

Thank you in advanced if you try and help me, even if you don't manage

A:Lenovo backup partition deleted

Ahhhhh....you can't delete that partition. You need to use the link you provided and recover the partition. That will get your machine back up and working.

Here is a link for some free software: http://partedmagic.com/

Read other 6 answers
RELEVANCY SCORE 41.2

A technician unfortunately decided to reformat the hard drive of my Lenovo IdeaPad 100-14IBY (Windows 8.1), and in doing so apparently erased my Lenovo backup partition. Is there any way of restoring it? 

A:Lenovo IdeaPad 100 - Backup partition deleted

Yes you can one time download preinstalled OS from following Lenove site. http://pcsupport.lenovo.com/in/en/lenovorecovery?linkTrack=Body:Box:RecoveryMediaYou need to register yourself as well as need to put your mechine serial no. to create the order. Please be infromed that this process can be done only for one time for free of cost, after getting the email the OS will be available for downloading for next 24 hours to 72 hours and you will need at least 16 GB pendriver. Please cross check with customer support team regarding this. This process is to create boot media and using this bootmedia you will be actually doing factory format. So do save your data before doing this process.

Read other 1 answers
RELEVANCY SCORE 41.2

Hi all,I have lenovo G50-80 laptop, bought 1 year back. Previously i used windows 8.1 and the laptop worked pretty good. It gave around 3:30 to 4 hrs battery backup. Recently I install windows 10 pro. From that time the battery is standing for less than 2 hrs. Just to make sure again I installed windows 8.1 and the battery is giving 3:30 to 4 hrs. I want to use windows 10 but with decent battery backup. I read some blogs about this issue but i couldn't get rid of this problem. Please reply your suggestion. Thanks

Read other answers
RELEVANCY SCORE 40

I have a Lenovo YOGA 3The motherboard has a fail - And when contactiing lenovo support, they need to erase the harddrive. ????It's like saying -The light on my car is broken - OK then we need to change your gear to fix your lights When you buy a Lenovo - You should be informed that you need to have a backupsystem with the computer, and the consequences if you dont have that. -Why isnt that done?

Read other answers
RELEVANCY SCORE 40

Hi all,

I'm trying to set up a laptop for my girlfriend. It's a Lenovo S206. The laptop has a nice little 'one touch' button that lets you automatically restore the laptop to any previous point with a clean re-install. Worked great as win 8 but now it's updated to Win 10 I want to create a new point while it's 'clean' as she's going overseas, just so she can sort it herself if it all goes wrong!

Only problem is, pressing one-touch button and asking it to create the backup, it says it needs 39.9gb of space, and only 25gb is available.

Looking at the Disk Management, currently the hard drive is as follows:

|| 1000MB healthy (recovery partition) || 260mb Healthy (EFI System Partition || 1000mb healthy (OEM Partition) || 250.31GB NTFS Healthy ( Windows8_OS (C Boot, Page File, Crash Dump) || 462MB Healthy (Recovery Partition) || 25GB NTFS Healthy (Primary Partition LENOVO (D ) || 20GB Healthy (Recovery Partition) ||

Free spaces are 1000mb, 260mb, 1000mb, 202.92GB, 462mb, 23.83GB, 20GB

First thing - why so many little drives, with no used data?
Second thing - I assumed that D: (LENOVO) was the drive that the one-touch used - I seem to remember when I clean restored to factory (Win 8) the address was in D: - is that correct? it only seems to have a few mb on it
Thirdly - should I just be extending that drive to make it big enough, if so how? I tried shrinking C but you can't then extend D (it's not 'next' to it)

Any help much appreciated!!!

A:Extend Partition size on Lenovo S206 running Win 10 to create backup

Hi Davince,

Welcome to the 10forums

Just so we can get a clearer picture if your partition situation, please read Disk Management - How to Post a Screenshot of

Read other 12 answers
RELEVANCY SCORE 40

Since you have to hunt around different Lenovo sites (and other sites) to find out about these softwares, I decided to make a post to get feedback from actual Yoga owners on how these programs interact, what they do, which ones are prerequisite, and which ones are unnecessary. Please don't take this as a blanket answer. This is just what I have found. It might be right - it might be wrong. I'm looking for others to post their experiences as well. Lenovo System Interface Foundation Driver - Necessary prerequisite (missing driver in device manager without it). It allows the Lenovo Utility and Lenovo Companion to work. Lenovo Yoga Mode Control - Necessary if you want to use your yoga to seemlessly change between all the different modes (laptop, tablet, tent, stand). This software is responsible for autorotating and putting Windows into tablet mode. Lenovo Utility - Recommended(?) This one I'm not too sure on. I remember that I was missing some function that I wanted but I can't remember what it was now. Maybe battery cycle count and health? Lenovo Companion - I don't have this one installed and don't think it's necessary but would like someone else to shed some light here.

Read other answers
RELEVANCY SCORE 36.8

Hello Girls and Boys, So I recently recovered my laptop with lenovo one button and the problem I had after recovery is that I recovered to windows 7 from allready upgraded windows 10. Then i had to do an upgrade again and it took me a lot of time.....I don`t want to go through that againg....so I made a Imagex capture of freshly upgraded Windows 10 whit all my apps i normaly use....now the file is 9Gb and the cdrivebackup.wim is 11.3Gb. So my question is: Can i swap the cdrivebackup.wim with my freshly created win 10 wim image? I would copy my win 10 wim onto Q:\ and renamed it to cdrivebackup.wim. Would that work? I mean I can do a new install every time with my USB Gimagex and its really simple but I want to have an "On the Way" option for recovery and that "On the Way" option should be windows 10....

Read other answers
RELEVANCY SCORE 36.4

Hi,My Lenovo laptop K2450 wont boot up and always in blackscreen (no boot, no bios, no lenovo logo or anything just blackscreen) when im turn on the power, this happen after im changing some config in BIOS (but tottally forgot what changed). Everything work fine except fan is off after 3 second. Already tried to reset BIOS but nothing happen, then my technician say that my BIOS is corrupt and i need back up for that. Anyone here got BIOS backup for Lenovo K2450? thanks for help.

Read other answers
RELEVANCY SCORE 36


Hi,
I did a full backup using vista backup and recovery centre onto a seagate 160gb usb drive. The backup completed successfully so I rebuilt the machine.

On trying to rebuild, I run bakup and restore center and it cant even see the drive (it can see the C partition, the E (recovery) partition and nothing else. It doesnt see the D (Data Partition) or the USB device.)

Tried copying it to the E partition and forcing it to use it but get backup location not found which is mentioned elsewhere as an issue with mediaid.bin.

any ideas, i now have a shiny sparkly new machine with no data on it.

The data is there in a compressed form but id much rather restore properly.

grateful for any help.

Cheers

Read other answers
RELEVANCY SCORE 32

Hi everybody,
I have an Inspiron 7548 4K with W10 (upgraded from 8.1) and since a few days I've been having the following problem with DBAR (1.9.X.X). When I try to take a SYSTEM back up, it ALWAYS stops/fails to complete at 12% during the Backing Up module (checking system and building list complete OK). The message is "Operation Cancelled. Destination location unavailable or not enough space on the disk". It always happens at 12% of the process. I have tried it more than 10 times, with no avail. Further info:
1. The only change in my system was a W10 update of March 23, 2016. NOTHING else. Up until then everything worked fine.
2. Tried with both the external HDD with previous/existing backups AND a new/clean one. Both are 500 GB for backing up the internal 256 GB, so there is more than enough drive space. Also tried different usb ports in case one was malfunctioning. 
3. Recovery media backup works fine. The problem is when it tries to proceed with system backup. I don't take data backups since I use cloud.
4. Tried uninstalling and reinstalling DBAR, keeping it below latest version 1.9.2.8. Same result.
Anybody?
Thanks,
Michael

Read other answers
RELEVANCY SCORE 32

I've got Acronis True Image 10.
Can I backup all emails and then restore to a new installation of the hard disk?

Erm: OK... that might sound dumb!
That's *exactly* what it's supposed to do right!!?

I've got a copy of XP Tablet which is dying.
I want to do a full original installation restore and restore the emails.

Just wanted to double check!!

Also: I've made a backup (of another PC).
I have a file size that is 9GB.
How can I store this onto DVD discs?
And how can I make the discs be bootable??
So that I can juts restore the whole system by booting from the DVD discs?

Thanks!
OM
 

Read other answers
RELEVANCY SCORE 32

I bought a 128GB "PNY Attache 2 USB 2.0 Flash Drive" so that I could preform a "Bootable Backup" using "Dell Backup and Recovery" yet when I inserted the flash drive and selected Bootable Backup from the list it fails to detect the drive.  Bootable Backup says it requires "a storage USB storage device with more than 100GB of capacity so why doesn't "Bootable Backup" sense my USB flash drive since it has more than 100GB of space on it?

A:Dell Backup and Recovery's Bootable Backup Won't detect USB Flash Drive

Try updating your Dell Backup and Recovery software.  With the update it now seems to work with all USB flash drives I throw at it.

Read other 82 answers
RELEVANCY SCORE 32

Does the following make sense to use for a backup strategy?
Like most people I am terrified of losing my data and I have 75,000 photos on my 2TB C: drive. What I am considering doing is adding a second internal 2TB drive and running Rebit to back up to that drive. Then adding an external 2TB external USB drive and also backing up to there with Rebit.
I would also run the backup program that is part of Win 7 Pro and weekly create a system image and also save it to the new internal 2TB drive. Then once a month create a system image with the Win 7 backup program and save it to the external USB drive.
Currently my C: which is a WD20EARX has 755 GB in use. Not sure if this makes any difference but I am running Intel SRT (Smart Response Technology) in Enhanced Mode and have a Crucial SSD running RAID 0.
BTW, I know that Rebit is always backing up. Can that be a bad thing?
Any opinions on the above will be greatly appreciated.

Thanks
Zack S

A:Does this backup strategy make sense? Rebit, 2 drives and Win7 backup

A few random thoughts:

It sounds like your data (photos) are on the C partition. You might find that putting your data on a separate D partition on that same drive will make your backup strategy a bit simpler. Not a requirement, just a suggestion.

I would not rely on an image as a backup for data. If your data is on C, any image of C will of course include the data, but imaging is not foolproof and can go bad for unknown reasons.

I have never even heard of Rebit and assume you know it to be reliable. I don't know if it is a file by file backup program or an imaging program.

Copying the photos to another internal drive is a good idea. As is the idea of copying the photos to an external. The more backups the better. But you might consider some type of offsite backup in case of fire or theft.

I'd probably do this:

Temporarily move all data from C to some other physical drive--internal or external.

Then shrink C considerably to the size needed to hold Windows easily--maybe 100 GB.

Then make a new D (data) partition from the free space now available.

Move all data back to the new D from wherever you temporarily moved it.

Use an imaging program thereafter to make periodic images of C alone, storing the image on either the new internal or an external.

Use a file by file backup program to make periodic backups of D alone to the new internal and the external.

I'd probably just use a single partition on the new internal and the external and separate stuff by a folder struct... Read more

Read other 5 answers
RELEVANCY SCORE 32

My Win 7 x64 machine (Dell) has three hard drives in it. The original 2TB Seagate with the operating system on it, C:, a 2TB WD used for data storage,F:, ..and a 1TB Seagate repurposed from the XP computer it replaced. That last drive contains only data as that was its purpose in the previous machine. There are no programs on it and it's formatted NTFS.

On boot-up, the computer sees the 1TB Seagate as drive E: and it functions just fine until it's time for a Windows Backup. About 30 seconds into the backup, I get the message that "Intel Rapid Storage Technology has detected a disk removed on Port 3." At this point, the backup fails and Windows no longer sees the E: drive until next cold boot. The backup's target is an external Seagate drive J: that is unaffected by any of this.

Yes, I've changed SATA cables. I've changed the Motherboard connection where the E: drive's SATA cable is attached. I've reversed and rerouted cables so there's no odd pressure on any one of them. I've disabled the power-saving settings so the disc spins all the time. Nothing helps.

The E: drive functions just fine until Windows Backup starts, then it acts as if I removed it.

Error code from Windows Backup dialog is 0x80070002 "The system cannot find the file specified."

Suggestions?

A:When Backup Runs, Windows Reports Backup Target Disk Removed

Can you access the external target drive normally?

Also, could you post a screencap of Disk Management for us?
(Windows key + R to open Run, then type "diskmgmt.msc")

Read other 9 answers
RELEVANCY SCORE 32

How do I control how much disk space my Windows Backup takes up? I have a 1TB external disk for backups and other files. My computer's HDD only has about 250GB capacity. I don't know why my backups file got so bloated. What should I do?

I see that I can delete the older backup file: 22-Oct to 11-Nov. But read the text.
""Deleting previous backups will free up space on your backup location."
So far so good.

Then it continues, "All files backed up during the selected period will be deleted."

I'm pretty sure the text is just badly written. I guess that means the backup-files (on the backup drive) will be deleted. They couldn't mean that the original files (on my data drive) will be deleted. That sure is a scary possibility though. How do you understand this?

System: Windows 7 Enterprise

ScreenCap below

[IMG]http://s3.**************/2fxlxl7lw/Backup_Uses_800_GB_2010_00_29_v01.jpg[/IMG]

A:Backup takes 800GB? Manage Windows Backup Disk Space

Yes, it is perhaps, badly written, but true. All files in the backup period from 22-Oct. to 11-Nov. will be deleted. Not to worry, though, because those same files are backed up in a later backup period from 11-Nov. to ? It is safe to delete older backup periods.

Read other 6 answers
RELEVANCY SCORE 32

Where can I find the descriptive definitions of the “reason codes” reported in the Activity Logs when a Backup fails? I have searched all of the DELL site and non-DELL URLS.
Errors with undefined “reason codes: 2, 5 and 32” are reported under the Activity Logs when using the current DELL Backup and Recovery software (Version 2.8.0.62) ran as Administrator in Windows 10 (Version 10.0.10586 Build 10586)
 
EXAMPLES:
Data Backu- - <date at time>
An error occurred during the process
Scheduled Backup No
Multiple files Yes
The following files were not backed up:
C:\Users\Pat\AppData\Local\Comms\Unistore\data\0000000a000000031013.dat (reason code: 2)
C:\Users\Pat\AppData\Local\Microsoft\Office\16.0\OfficeFileCache\CentralTable.accdb (reason code: 32)
C:\Users\Pat\VeriSign Root Certificates\DS_Store (reason code: 5)
 
ENVIRONMENT
OS Name - Microsoft Windows 10 Pro – Version 10.0.10586 Build 10586
System Type - x64-based PC
DELL Backup and Recovery – Dbr.exe – Version 2.8.0.62 – 04-JAN-2016
DELL Update Tray – DellUpTray.exe – Version 1.9.5.0
DELL Update Service – DellUpService.exe – Version 1.9.5.0

Read other answers