Over 1 million tech questions and answers.

Constant BSOD failure. pci.sys driver power state failure

Q: Constant BSOD failure. pci.sys driver power state failure

So I have a pirated windows 8.1 which I have been using for more than a year now. Since the past one week my drivers ( especially the internet driver) keeps crashing and stops detecting any networks. Upon an attempted restart I get the Bsod for which I have attached the files ( All the minidumps.) I run a Dell 5521 R and have updated the drivers, uninstalled and reinstalled them too. Kindly help ASAP as I require my wifi urgently tomorrow.
Note: After restart the drivers get refreshed automatically and start working for sometime. And then the same issue. Please help.VATSAL-Tue_02_09_2016_101910_61.zip

Read other answers
RELEVANCY SCORE 200
Preferred Solution: Constant BSOD failure. pci.sys driver power state failure

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

RELEVANCY SCORE 140.4

Hey, I hope someone can help me with this. I'm currently stuck in China for another three months and I'm not too keen on taking my laptop to the techs here. My computer skills are... limited so I'm not sure how much I'll be able to do on my own but hopefully, you guys can help me figure out something.

Over the past two weeks, my computer has been freezing a lot at certain periods. It can freeze about 10-20 times in the space of an hour. It usually begins with a crash while I'm browsing the internet (Firefox or Chrome) or working on a word document. After I do a force reboot, my laptop freezes again within the first 5 minutes after the startup screen as my startup programs are loading, sometimes after I've re-opened my browser or Word, or even when I'm not doing anything. I usually have to reboot a few times within a short timespan after the first crash. My laptop also freezes after inactivity; I go away to do something and ten minutes later when I get back, I find that my laptop has frozen.

Today, I got a BSOD. I forgot to write down the error but from memory, it was for a Driver State Power Failure. It occurred after I left my computer on when I went out for a bit.

Here are the details I could find:

OS: Windows 7
x64
Full retail version
Age of system: bought in June 2011
Haven't reinstalled the OS
Intel Core i5-2410M CPU @ 2.30GHz
4.00GB RAM
NVIDIA GeForce GT 520M
Thanks in advance!

A:BSOD Driver Power State Failure and constant crashes

This was a timeout waiting for a driver to respond. Usually a driver. The two best candidates (with only one crash to examine it is not definative) are your Avast, and this driver Related to SSPORT.sys 32bit Port Contention Driver from Samsung Electronics. This driver is from 2005 and needs to be updated or removed.

Avast can be a contributing cause of BSOD'S . Please remove and replace with Microsoft Security Essentials AT LEAST TO TEST


http://files.avast.com/files/eng/aswclear5.exe

Microsoft Security Essentials - Free Antivirus for Windows

Read other 8 answers
RELEVANCY SCORE 139.2

Hi,

I'm getting frequent random BSOD Power_Driver_State_Failure on my ASUS G551JM Laptop (https://asus.com/support/Download/3/...RbVetG02i5/41/) It happens while plugged in and running off battery but more frequently on battery power. It usually happens within 30 minutes of powering on the laptop or waking it up from sleep/hibernate. It primarily happens after logging into windows but on rare occasion will blue screen prior.

I've updated drivers from Asus and chipset manufacturers websites: intel rapid storage driver, Intel MEI driver, Intel INF driver, Intel wifi and bluetooth drivers, clean installed nvidia gtx 860m drivers. I tried to update intel HD graphics drivers but got this error message:
Computer Manufacturer Graphics Driver Detected. Your computer manufacturer customizes the drivers that run Intel components on your machine. You might lose functions and cause other technical issues by installing the Intel drivers.
Windows updates are up-to-date and no virus or malware.

Please help,
Thank You.

DM Log collector Tool LOST-Wed_08_03_2016_190523_80.zip

A:ASUS Laptop Constant BSOD Power Driver State Failure

Hi rapidvodka,

I would recommend to install the Nvidia drivers from ASUS

Code:
2: kd> !irp
Irp is active with 0 stacks 0 is current (= 0xffffe001e81748c0)
Mdl=ffffd0006f0853c8: No System Buffer: Thread ffffd0006f085458: Irp stack trace.
cmd flg cl Device File Completion-Context
2: kd> !irp ffffe001`ed49d010
Irp is active with 6 stacks 4 is current (= 0xffffe001ed49d1b8)
No Mdl: No System Buffer: Thread 00000000: Irp stack trace.
cmd flg cl Device File Completion-Context
[N/A(0), N/A(0)]
0 0 00000000 00000000 00000000-00000000
Args: 00000000 00000000 00000000 00000000
[N/A(0), N/A(0)]
0 0 00000000 00000000 00000000-00000000
Args: 00000000 00000000 00000000 00000000
[N/A(0), N/A(0)]
0 0 00000000 00000000 00000000-00000000
Args: 00000000 00000000 00000000 00000000
>[IRP_MJ_POWER(16), IRP_MN_SET_POWER(2)]
0 e1 ffffe001e9fb3540 00000000 fffff80103cfe590-ffffd0006a7eb8f0 Success Error Cancel pending
\Driver\pci dxgkrnl!DpiFdoPowerCompletionRoutine
Args: 00000000 00000001 00000001 00000000
[IRP_MJ_POWER(16), IRP_MN_SET_POWER(2)]
0 e1 ffffe001ed481040 00000000 fffff80352fa875c-ffffe001ef323f08 Success Error Cancel pending
Unable to load image \SystemRoot\system32\DRIVERS\nvlddmkm.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for n... Read more

Read other 3 answers
RELEVANCY SCORE 132.4

Hi,

I've been browsing the site and the internet for a sollution to my problem, but can't seem te find it. There are similar postings, but they're always just a little different. So that's why i posted the new thread.

Since a couple of days i've been experiencing troubles shutting down my PC and using my USB ports. It started when i tried to log onto my work from home. It failed and the IT guy from work told me to reinstall citrix reciever. So I did and I was able to work from home. After finishing and logging out (to get back to my own PC) I found that my USB portst didn't work anymore. I tried rebooting, but af 10 minutes of "shutting down" I got a blue screen: Driver Power State Failure with code 1000009f.

I did the following:
- tried system restore - it failed with different time stamps
- update drivers - they were all up to date the system said
- Malware Bytes, CC Cleaner, MS Essentials, Hitman pro - Did them all, had some minor stuff, fixed that, problem remained.
- SFC/scannow - no problems
- Memory check - no problems

As it is now, the only update I have left is the update to WIN10. However it has tried and failed during a few of the reboots, so that doesn't seem to be and option.

After try all different kinds of things from a lot of posts I decided to refresh my windows install. Did a lot of updating and still the problem remains. Although I now found out that USB devices that are plugged in upon startup work. Once I unplug en replug them, t... Read more

A:BSOD Driver power state failure when shutting down /failure USBports

Are you still having BSOD problem?

Read other 1 answers
RELEVANCY SCORE 126

I upgraded my spiffy trouble free VAIO F a couple of days ago and have had nothing but trouble since. 4 or many more times per day I get a message Driver_Power_State_Failure and then my computer restarts. I would add dump file information but I am not sure how to even do that. I may just need to wipe my computer and go back to Windows 7, but thought I would look for help here first. Any help would be appreciated...Jack

A:Driver Power State Failure Messages and constant crashing since upgrad

I had this problem. I solved it by getting rid of the free AVG anti-virus software. I'd had to move to this software because my favoured free AV, Avira, didn't support Windows 8. Removing AVG means that since that time (5 days ago) I haven't had a single BSOD, with the computer constantly on, whereas I was having 5 or 6 reboots per day immediately before.

I thought it might have been a dodgy battery - I knew my battery was failing anyway - so I replaced this as well. But the new one didn't arrive till two days after I'd removed AVG and in those two days I hadn't had a BSOD anyway.

So check any programs that install on boot, would be my suggestion.

PS The revised Windows Defender seems to suffice as an AV anyway, now.

Read other 14 answers
RELEVANCY SCORE 119.6

Hey, I got some BSOD problems. Do you got time & experience to help me?

I got Windows 8 at the moment, I will install 8.1 shortly. Had 8.1 before i re-installed OS when the first BSOD showed up, so I doubt that 8.1 will fix things completely.

My problems ATM!

- Driver Power State Failure
- Video TDR Failiure (nvlddmkm.sys)
- Screen freezes at start up or when I get to the desktop
- Have to Disable my NVIDIA GeForce GTX 675M to use the CPU (Windows has stopped this device because it has reported problems. (Code 43).

Got two other kinds of BSOD before I re-installed windows but don't remember what they said, I just felt like "Hey I need to re-install my OS anyways so w/e". But apparently that didn't solve the problems.

I also gained "NVIDIA Windows Kernel Mode Driver, Version 340.52 stopped working While playing CS:GO" but that was before I re-installed windows. And now to use my CPU I need to go into Device Manager and shutdown my NVIDIA card to be able to use the CPU and use the Intel card instead. If I don't shut it down my CPU will freeze the screen for days, til I restart or I get a BSOD.

I will buy a can of air and open up my laptop and blow some dust away, perhaps that could help? Perhaps the NVIDIA card is burned/broken and I have to buy a new PC?

I've tried a few different driver for my NVIDIA card also, nothing works.

I'm no computer expert and thats why I'm here begging for help, so if someone could help me out here I would appreci... Read more

A:Driver Power State Failure,Video TDR Failure(nvlddmkm.sys)

Hi Markmsigt60 & Welcome to the forums ^_^,

I have analysed your dump files and below has been provided an analysis of the same for informative purposes :-

Code:
**************************Fri Sep 26 06:15:51.972 2014 (UTC + 5:30)**************************
Loading Dump File [C:\SysnativeBSODApps\092614-55906-01.dmp]

*** WARNING: Unable to verify timestamp for ntoskrnl.exe

*** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe

Windows 8 Kernel Version 9200 MP (8 procs) Free x64

Built by: 9200.16912.amd64fre.win8_gdr.140502-1507

System Uptime: 0 days 0:07:07.738

*** WARNING: Unable to verify timestamp for ntoskrnl.exe

*** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe

Probably caused by : ntoskrnl.exe ( nt+5a540 )

BugCheck 9F, {3, fffffa800892b880, fffff8800326a7f0, fffffa80089c3e10}
BugCheck Info: DRIVER_POWER_STATE_FAILURE (9f)

Arguments:
Arg1: 0000000000000003, A device object has been blocking an Irp for too long a time
Arg2: fffffa800892b880, Physical Device Object of the stack
Arg3: fffff8800326a7f0, nt!TRIAGE_9F_POWER on Win7 and higher, otherwise the Functional Device Object of the stack
Arg4: fffffa80089c3e10, The blocked IRP
BUGCHECK_STR: 0x9F

DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT

FAILURE_BUCKET_ID: WRONG_SYMBOLS

CPUID: "Intel(R) Core(TM) i7-3630QM CPU @ 2.40GHz"

MaxSpeed: 2400

CurrentSpeed: 2395

BIOS Version E16F3IMS.50R

BI... Read more

Read other 3 answers
RELEVANCY SCORE 119.2

info taken from Speccy.


Operating System
MS Windows 7 Home Premium 64-bit SP1
CPU
Intel Core i5 2500K @ 3.30GHz 41 ?C
Sandy Bridge 32nm Technology
RAM
8.00 GB Dual-Channel DDR3 @ 824MHz (8-8-8-24)
Motherboard
ASUSTeK Computer INC. P8Z68-V PRO (LGA1155) 60 ?C
Graphics
BenQ G2420HD ([email protected])
1280MB GeForce GTX 570 (ASUStek Computer Inc) 36 ?C
Hard Drives
125GB M4-CT128 M4SSD2 SCSI Disk Device (SATA-SSD)
977GB Western Digital WDC WD10 02FAEX-00Z3A0 SCSI Disk Device (SATA) 39 ?C
Optical Drives
ASUS DRW-24B3ST ATA Device
ELBY CLONEDRIVE SCSI CdRom Device
Audio
Realtek High Definition Audio

Power
Corsair HX 650 professional series (650 Watt)

home built PC my brother and I made it first time home build. My brothers PC is identical except for his case, and he hasn't had any problems

My computer Randomly blue screens with DRIVER STATE POWER FAILURE, but it doesn't create a minidump in my windows folder.

I tried running verifier but it seemed like nothing happened I followed all the steps but after reboot windows just started up normally like nothing happened, I ran a query and it a command prompt popped up for 1 second then disappeared before i could read anything.

I looked at your thread on forcing a mini dump, but unfortunately i got a bit confused by the lingo and gave up ...

I really appreciate any help as It's incredibly frustrating not knowing why my new shiny powerful computer is crashing.

i've attached t... Read more

A:Driver Power State Failure BSOD

Verifier won't necessarily pop up a BSOD immediately on reboot - it depends on what the offending driver is doing as to when it'll BSOD.

First off, here's the info that I have on SSD's:

Quote:




There's not a whole bunch available to test SSD's. The "easiest" test is to remove the SSD, install a platter-based hard drive, install Windows and test for stability that way.

Here's some suggestions:
- Update the SSD's firmware to the latest available version
- Slow the memory (RAM) down to the next slower speed (I've only seen one person who claimed that this worked for them).
- Use any manufacturer's utilities that you may have. If you don't have any, then try this free one (I haven't used it myself): Crystal Dew World
- Update chipset and storage controller drivers to the latest available from the manufacturer of the device (not the manufacturer of the motherboard)
....NOTE: Recently (Nov 2011) we had BSOD issues with the Marvell 91xx controller and an SSD. You may have to swtich controllers also.-
Replace the SSD with a platter based hard drive and see if that stops the BSOD's. If it does, then it's likely that there's a problem with the SSD OR an incompatibility with your system.
It's my opinion that SSD's aren't reliable enough (with current hardware) to be used on a system that needs to work reliably. Until I see reliability I will not recommend, nor will I use, SSD's for critical applications.
06 Dec 2011 - This post tends to confirm... Read more

Read other 5 answers
RELEVANCY SCORE 119.2

System Specs:
Windows Home Premium 64bit
Original System
OEM
Both hardware and system are 1 week old

Woke up this morning to find the BSOD

A:BSOD Driver Power State Failure

  
Quote: Originally Posted by cuz314


System Specs:
Windows Home Premium 64bit
Original System
OEM
Both hardware and system are 1 week old

Woke up this morning to find the BSOD


This was Related to Rt64win7.sys 8101E/8168/8169 NDIS 6.20 64-bit Driver from Realtek Corporation

I would re-install using newest.

Read other 4 answers
RELEVANCY SCORE 119.2

Hi There,

Need some help, I am getting a driver power failure followed by a blue screen of death a reboot. Not sure what the problem is, can anyone provide some advice. I have tried to attached the minidump files but have not been able to.

Thanks in advance

A:Driver power state failure BSOD

Download BlueScreenView (in Zip file)No installation required.Unzip downloaded file and double click on BlueScreenView.exe file to run the program.When scanning is done, go Edit>Select All.Go File>Save Selected Items, and save the report as BSOD.txt.Open BSOD.txt in Notepad, copy all content, and paste it into your next reply.

Read other 10 answers
RELEVANCY SCORE 119.2

I have been having random BSODs for Driver Power State Failure. I have attached the file requested.

Windows 7 Ultimate x64
Retail Version
Home built PC OS installed 18 months ago

A:Driver Power State Failure BSOD

  
Quote: Originally Posted by TomanSager


I have been having random BSODs for Driver Power State Failure. I have attached the file requested.

Windows 7 Ultimate x64
Retail Version
Home built PC OS installed 18 months ago



HI TomanSager and welcome

These crashes are virtually identical and Related to hidusb.sys Microsoft HID Class Driver.

It is simply taking too long to respond and there is probably a USB device preventing it.

What USB devices do you have connected?


I would run a system file check to verify and repair the OS files.

Run a system file check to verify and repair your system files.
To do this type cmd in search, then right click to run as administrator, then
SFC /SCANNOW

Read here for more information SFC /SCANNOW Command - System File Checker

Let us know the results from the report.


Code:

Microsoft (R) Windows Debugger Version 6.11.0001.404 X86
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\JMH\Desktop\Windows_NT6_BSOD_jcgriff2\051511-19047-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

DbsSplayTreeRangeMap::Add: ignoring zero-sized range at ?fffff800`00b9c500?
Symbol search path is: SRV*C:\Symbols*http://msdl.microsoft.com/download/symbols;srv*e:\symbols
*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7600 MP (3 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Bu... Read more

Read other 4 answers
RELEVANCY SCORE 119.2

Came back to a computer that won't shut down, restart or sleep properly. When it does it takes several minutes and at one time gave me the titular BSOD. Everything works fine in Safe Mode (go figure), so I've got a rogue driver in here and I can't for the life of me figure out which one's causing the trouble.

Other symptoms are slow startup (screen starts black for up to a minute after the welcome screen) and Device Manager hangs whenever I try to change (enable/disable, uninstall) drivers. I picked up a hotfix (KB977307) to alleviate the shut down/sleep symptoms but I'd like a little more information before I install it.

Aside from those symptoms there's no major hit to running performance. It looks like I can still use my main comp but I have to rely on hard power downs and jump through safe mode to turn on the computer. The device manager issue is such because I often have to reset my network adapter (Unid network kills my internet sometimes, working to fix that). This will become more of a problem when the next rounds of updates come knocking though.

Basic Spec:
Processor/Mobo/Memory Upgraded Feb 2011
Windows 7 64-bit (x64) Ultimate
Retail (received from MSDN)
Installed Feb 2011

A:BSOD: Driver Power State Failure

Run a system file check - SFC /SCANNOW Command - System File Checker

Please run these tests and report back the results
1. Memtest86 - Run for 7-8 passes - RAM - Test with Memtest86+
2. Prime95 - Run all three tests for 3-4 hours each or until fail - http://www.sevenforums.com/tutorials...t-prime95.html
3. Hard drive scan usings SeaTools - SeaTools for Windows | Seagate - Both long and short tests
BSOD BUGCHECK SUMMARY

Code:

Built by: 7600.16695.amd64fre.win7_gdr.101026-1503
Debug session time: Thu May 19 09:21:57.143 2011 (UTC - 4:00)
System Uptime: 0 days 0:14:30.439
*** ERROR: Module load completed but symbols could not be loaded for WUDFRd.sys
*** WARNING: Unable to verify timestamp for win32k.sys
*** ERROR: Module load completed but symbols could not be loaded for win32k.sys
Probably caused by : memory_corruption
BUGCHECK_STR: 0x9F
PROCESS_NAME: System
FAILURE_BUCKET_ID: X64_MEMORY_CORRUPTION_ONE_BIT_LARGE
BiosReleaseDate = 12/24/2010
SystemManufacturer = System manufacturer
SystemProductName = System Product Name
CPUID: "Intel(R) Core(TM) i5-2500K CPU @ 3.30GHz"
MaxSpeed: 3300
CurrentSpeed: 3310
??????????????????????????????????????????????????????????????????????????????????????``

Read other 2 answers
RELEVANCY SCORE 119.2

I've had the same BSOD twice now whilst playing Call Of Duty - Modern Warefare 3. The game freezes then the BSOD appears.

I have also attached the 2 minidumps

? OS - Windows 7 Ultimate Service Pack 1
? x86 x64 ?
? What was original installed OS on system? Windows 7 Ultimate
? OS - Full retail version
? Age of system (hardware) - 3 Years
? Age of OS installation - Approx 1-2 Months old

? CPU - Intel Core 2 Quad Q6600 @ 2.4GHz
? Video Card - HIS ATI 5850
? MotherBoard - Asus P5K Deluxe WiFi
? Power Supply - 600W SEASONIC M12-600 Modular

? System Manufacturer - Self Build

A:BSOD - Driver Power State Failure

Perfmon reports an issue with a PS2 keyboard. If you're using a USB keyboard, it's safe to ignore this message.

You have 2 different wired network controllers (Realtek and Marvell). Why is this? Why isn't the Marvell device either removed from your system or disabled in the BIOS?

You have a Realtek RTL8187 Wireless 802.11b/g 54Mbps USB 2.0 Network Adapter
Win7 doesn't like these devices, and will Blue Screen in a heartbeat if you use older drivers. Here's my rant on these devices:

Quote:




I do not recommend using wireless USB devices. Especially in Win7 systems.
These wireless USB devices have many issues with Win7 - and using Vista drivers with them is almost sure to cause a BSOD.
Should you want to keep using these devices, be sure to have Win7 drivers - DO NOT use Vista drivers!!!
An installable wireless PCI/PCIe card that's plugged into your motherboard is much more robust, reliable, and powerful.




MSINFO32 points to disk issues and cites your jraid.sys (RAID) drivers (as does both memory dumps). Please:
- run hardware diagnostics on all hard drives: HD Diagnostic (read the details at the link) - Test ALL of the hard drives.
- update the RAID drivers (if they are the most current version - uninstall them, then install a fresh copy).
- check the RAID array for problems (I don't have much knowledge about RAID - try over in the Hardware Forums).

The Asus P5 series of mobo's has some issues with memory settings/timings/voltag... Read more

Read other 13 answers
RELEVANCY SCORE 119.2

Just started happening within last 2 days.

Gateway P7811FX laptop (approx 2yrs old), full retail Win7 Pro x86 installed early June 2011. Never had a BSOD until last couple days. Both crashes occurred seemingly at random (not at startup).

Ran verifier as instructed here and OS crashed at startup. Able to turn off Driver Verifier in Safe Mode. Restarted normally to collect dump and perfmon files.

TIA

A:BSOD Driver Power State Failure

A device driver is probably the cause
For that reason old drivers should be updated:

Synaptic Touchpad driver Drivers | Synaptics
SD reader driver Fujitsu Gateway Support - Downloads & Support Documents
Conexant modem driver(s) Gateway Support - Downloads & Support Documents
Marvel Yukon Network driver Marvell - Support


Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

DRIVER_POWER_STATE_FAILURE (9f)
A driver is causing an inconsistent power state.
Arguments:
Arg1: 00000003, A device object has been blocking an Irp for too long a time
Arg2: 87bff2d8, Physical Device Object of the stack
Arg3: 82b2cae0, Functional Device Object of the stack
Arg4: 85e51ef8, The blocked IRP

Debugging Details:
------------------
DRVPOWERSTATE_SUBCODE: 3

IRP_ADDRESS: 85e51ef8

DEVICE_OBJECT: 87999510

DRIVER_OBJECT: 85dc24b0

IMAGE_NAME: disk.sys

DEBUG_FLR_IMAGE_TIMESTAMP: 4a5bbf20

MODULE_NAME: disk

FAULTING_MODULE: 8b218000 disk

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

BUGCHECK_STR: 0x9F

PROCESS_NAME: System

CURRENT_IRQL: 2

LAST_CONTROL_TRANSFER: from 82acbf35 to 82ae3f2c

STACK_TEXT:
8... Read more

Read other 5 answers
RELEVANCY SCORE 119.2

Hey all! I'm new here and hoping you might be able to help me with my BSOD! I'm getting a Driver Power State Failure. It's strange, the computer starts to lag (the mouse pointer starts to get sticky) then eventually it will hang. Only happens when I first boot the machine in the morning then its usually okay after an immediate restart. But it does seem to happen daily.

I've run the memory test & hdd tests as suggested in the sticky and they run fine without error. I have attached the files as requested along with a minidump from the BSOD. The information also requested in the sticky is below:

? OS - Windows 7 SP1
? x64
? Nothing preinstalled - I built it
? OS OEM bought alongside hardware
? Age of system - about 3 months
? Age of OS installation - 2 months (reinstalled OS once to try and repair this issue)

? CPU - Intel i7 2600K (Clocked at 4.2Ghz)
? Video Card - Nvidia GTX280
? MotherBoard - Asus Maximus IV Gene Z
? Power Supply - Tagan TG800-BZ 800W
? Corsair 160Gb SSD
? WD 500Gb HDD

? System Manufacturer: Me

Hope you can help!

Many thanks.

A:BSOD - Driver Power State Failure

Edit: wrong thread. Whoops!

Read other 5 answers
RELEVANCY SCORE 119.2

Hi, i'm constantly receving a BSOD on shutdown. The picture is attached.

These are my specs:
? OS - Windows 7 ?? x64 ? ? This one? ? All purchased from retailer? ? Bought it 2 months ago ? I havent reinstalled anything? ? Intel Core i5 ? Radeon HD 6490m ? HP ? ProBook 4530s

I wasn't able to retrieve the Perfmon report because it crashed. Nevertheless I joined the all the windows .dmp files.

A:BSOD Driver Power State Failure

MSINFO32 blames the drivers for your USB 3.0 controller.
Download and install this driver: http://h20000.www2.hp.com/bizsupport...tem=ob-97228-1

Most likely the above will fix the problem. If not, post back and we'll run hardware tests. Good luck!

Further info on BSOD error messages available at: http://www.carrona.org/bsodindx.html

The following info is just FYI, I've already addressed the issues that I saw in the above paragraphs:
3RD PARTY DRIVERS PRESENT IN THE DUMP FILES
- Create a System Restore Point prior to doing any of this. DO NOT mess with the drivers themselves - leave the Windows\System32\drivers directory alone unless we specifically direct you to it!
- Please either update the older drivers from the device manufacturer's website - or uninstall them from your system. Reference links are included below.
- DO NOT use Windows Update or the Update Drivers function of Device Manager.
- Please feel free to post back about any drivers that you are having difficulty locating.
- Windows Update exceptions may be noted below for Windows drivers.

Code:

iaStor.sys Wed Jan 12 20:50:12 2011 (4D2E5A54)
amdxata.sys Fri Mar 19 12:18:18 2010 (4BA3A3CA)
aswSnx.SYS Mon Nov 28 12:54:05 2011 (4ED3CABD)
btfilter.sys Tue Jan 04 04:41:55 2011 (4D22EB63)
aswTdi.SYS Mon Nov 28 12:52:18 2011 (4ED3CA52)
MfeEpePc.sys Wed Feb 09 06:59:50 2011 (4D5281B6)
hpdskflt.sys Fri May 13 14:47:02 2011 (4DCD7CA6)
sncduvc.SYS ... Read more

Read other 1 answers
RELEVANCY SCORE 119.2

Thanks for reading my post. I've been using my Gateway laptop for 3 years with relatively few problems. Since June or so, I've been seeing random blue screens, with no consistent series of events, or none that I can see. I'm attaching the sevensforum folder. Any help would be appreciated.

A:BSOD- driver power state failure

Welcome
You reports were consistent. The cause seems to be this driver
O2sdx64.sys file descriptionProductname: O2Micro SD Reader Driver Description: O2Micro SD Reader Driver (AMD64) O2Micro
Go to the company website and update the driver or replace the software

Read other 3 answers
RELEVANCY SCORE 119.2

I recently got a BSOD before this BSOD
the BSOD happened yesterday was kernel_data_input_error and I think I have fixed it? but the computer is still a little slow, and I noticed my Disk usage is most of the time at 100% then the apps(Browsers,task managers etc2) doesn't respond and now This BSOD Driver Power State Failure happened. I read that it's about an incompatible driver, but I don't know how to detect an incompatible driver because I refreshed windows 8.

A:BSOD Driver Power State Failure

Now I got the Driver_IRQL_NOT_LESS__OR_EQUAL
Edit: Got a BSOD again it's Driver_irql_not_less_or_equal again and it said tcpip.sys

I think this is about uTorrent.. Whene I open uTorrent and a few minutes later im getting a BSOD
I already fixed the 100% Disk usage on uTorrent but I ddnt know why I got the driver irql not less or equal tcpip.sys
Im using uTorrent to download PSO2(Phantasy Star Online 2) so it's legal the torrent came from their website

Read other 24 answers
RELEVANCY SCORE 119.2

Hello, this is my first time posting, so I hope I have met all the requirements. I have ran into the ole' BSOD caused by a driver power state failure. Just to bring you up to speed with what I have done thus far...I started with a system recovery after making a second copy of discs, thanks to freedrivecommander, and re-upgraded to 64bit windows 7 ultimate, upgraded from vista, and it started the same problem again. I have tried to use my hp health monitor to check my drivers and the only one it showed needing updating was one for the IR receiver, so I thought no big deal. I attached the dump file but was unable to run the perfmon / report. Any input would be greatly appreciated.

Thanks!!!

Finally found my motherboard info

CPU Core 2 Duo p7350
Motherboard Compal 30F7
chipset GM45/GM47 Rev 7
southbridge 82801m (ich9-m) rev 3
Bios HP F.55 date 10/06/09
Single DDR2 4096b gskill 333mhz
intel 4 seriess chipset

Please ask for anything else I can provide to help...

Thanks for reading and helping!!!

A:BSOD Driver Power State Failure...Please Help

  
Quote: Originally Posted by micahl88


Hello, this is my first time posting, so I hope I have met all the requirements. I have ran into the ole' BSOD caused by a driver power state failure. Just to bring you up to speed with what I have done thus far...I started with a system recovery after making a second copy of discs, thanks to freedrivecommander, and re-upgraded to 64bit windows 7 ultimate, upgraded from vista, and it started the same problem again. I have tried to use my hp health monitor to check my drivers and the only one it showed needing updating was one for the IR receiver, so I thought no big deal. I attached the dump file but was unable to run the perfmon / report. Any input would be greatly appreciated.

Thanks!!!


These were virtually identical and Related to hpdskflt.sys HP Disk Filter from Hewlett-Packard Corporation. I would re-install it (or remove it completely). I am not a big fan of HP's bloatware and remove it at all costs.

Code:

Microsoft (R) Windows Debugger Version 6.11.0001.404 X86
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\K\Desktop\Windows_NT6_BSOD_jcgriff2\051111-47205-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*C:\Symbols*http://msdl.microsoft.com/download/symbols;srv*e:\symbols
*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7600 MP (2... Read more

Read other 7 answers
RELEVANCY SCORE 119.2

Hi

I recently changed the case and added some internal peripherials to my computer. I have a 950W power supply so what I have should not be Bluescreening my computer. I cannot open the ,dmp files to find out what is going on. Can anyone help?

My system:
Win 7 Ultimate 32bit
950W power supply
4 hard drives
2 Super Mulit Optical drives
1 flash card bay
Asus motherboard (that was running fine before I changed cases)
in win IRONCLAD case (4 120 fans, and 1 huge fan)

I am attaching the BSOD for today as a zip file.

A:BSOD with Driver power state Failure

Make and model of your Asus mobo?

Please post the info from this topic: http://www.sevenforums.com/crashes-d...tructions.html

Initial triage suggests a problem with vclone.sys - a component of your VirtualCloneCD driver.
This theory is also supported by the presence of drivers related to it that date from 2002 (ElbyCDFL.sys and
ElbyVCD.sys)
I'd suggest uninstalling it to see if that stops the BSOD's

Also, your Norton shows up in the memory dumps, so I'd keep an eye on that.

PLease remove or update these older drivers. DO NOT use Windows Update or the update function of Device Manager:

Code:

ElbyCDFL.sys Thu Nov 28 09:18:04 2002 (3DE6259C)
- ElbyCDIO Filter Driver
- Driver Reference

dvd43llh.sys Mon Feb 07 13:16:49 2005 (4207B091)
- DVD For Free by RIF
- Driver Reference

ElbyVCD.sys Thu Nov 28 05:43:49 2002 (3DE5F365)
- VirtualCloneCD Driver
- Driver Reference

SI3114r.sys Wed Oct 03 17:45:37 2007 (47040D81)
- Silicon Image driver
- Driver Reference

DRVMCDB.SYS Fri Jul 21 14:20:31 2006 (44C11AEF)
- Drive Letter Access Component of Roxio Drag-to-Disc
- Driver Reference

SiWinAcc.sys Thu Jun 14 20:02:27 2007 (4671D713)
- Silicon Image driver
- Driver Reference

PxHelp20.sys Mon Jul 24 20:18:21 2006 (44C5634D)
- Sonic CD/DVD driver (used by many different CD/DVD programs)
- Driver Reference

DLARTL_M.SYS Thu Feb 08 23:04:41 2007 (45CBF2D9)
- Shared Driver Component of Roxio Drag-to-Disc
- Driver Reference

DLACDBHM.SYS Thu Feb 08 23:05:12 2007 (... Read more

Read other 1 answers
RELEVANCY SCORE 119.2

I really have no idea what is causing this BSOD. It seems to happen randomly and it has happened 3 times within the last week.

OS - Windows 7
x64
Originally installed Windows XP
full retail version
Age of system - about 3 years
Age of OS - 4 months
CPU - Intel Core 2 Duo E7200 2.53GHz
GPU - Nvidia GeForce 9600GT
Motherboard - ASUS Striker II Formula
Power Supply - 500W came with case (Raidmax Smilodon)

A:Driver Power State Failure BSOD

And the necessary files

Read other 7 answers
RELEVANCY SCORE 119.2

Hi,

I had a bsod the other day and it said "Driver power state failure" stop 0x0000009f. Can anybody help me?

A:BSOD Driver power state failure

Hi,

BSOD mentions win32k.sys - a Microsoft driver which is probably not the real cause.

So, run the driver verifier to try and get the real cause to show itself.

Driver Verifier - Enable and Disable

Also remove SPTD.sys which is known to cause BSODs; remove Daemon Tools, then use this SPTD installer to remove it (pick the uninstall option when you run the installer): DuplexSecure - Downloads

When you get a few more BSODs then please follow these Blue Screen of Death (BSOD) Posting Instructions exactly.

Regards,
Reventon

BUGCHECK SUMMARY

Code:

Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Debug session time: Sat Nov 20 12:56:49.103 2010 (GMT+13)
System Uptime: 1 days 12:26:37.883
*** WARNING: Unable to verify timestamp for win32k.sys
*** ERROR: Module load completed but symbols could not be loaded for win32k.sys
Probably caused by : memory_corruption
DEFAULT_BUCKET_ID: CODE_CORRUPTION
BUGCHECK_STR: 0x9F
PROCESS_NAME: System
Bugcheck code 1000009F
Arguments 00000000`00000004 00000000`00000258 fffffa80`03d03040 fffff800`046614d0
??????????????????????????????????????????????????????????????????????????????????????``

Read other 2 answers
RELEVANCY SCORE 119.2

i get this at least once a day because i dont turn my computer off and it gets really frustrating sometimes.

attached is the minidump file.

please if somebody could help me out :)

A:BSOD power state driver failure

FYI - I have severe eye problems. If I don't respond to your postings, please PM another staff member for assistance.

Please provide this info for a more complete analysis: http://www.techsupportforum.com/foru...ta-452654.html

The memory dump points to your network drivers as the cause. In most cases updating these will fix the problem.

BUT, the antivirus/Internet Security application that you use can also cause this. Uninstalling it and installing a freshly downloaded copy can fix that.

Also, this may be caused by a hardware problem. But the diagnosis of that is done by trying the above things.

Another possibility is the Gigabyte EasyTune software - but I'm not 100% sure that that's involved in this situation. To test, uninstall it and see if it stops the BSOD's.

Finally, the memory dump (crash) seems to have occurred during the sleep/hibernate transition. As such you should also reinstall the chipset, storage, and video drivers for your system.

Good luck!

BSOD BUGCHECK SUMMARY

Code:

Loading Dump File [C:\Users\FUBAR\_jcgriff2_\dbug\__Kernel__\092611-22854-01.dmp]
Built by: 7601.17640.amd64fre.win7sp1_gdr.110622-1506
Debug session time: Mon Sep 26 11:52:36.081 2011 (UTC - 4:00)
System Uptime: 0 days 1:23:55.251
Probably caused by : pci.sys
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0x9F
PROCESS_NAME: System
FAILURE_BUCKET_ID: X64_0x9F_3_Rt64win7_IMAGE_pci.sys
Bugcheck code 0000009F
Arguments 00000000`00000003 fffffa80`03ab1a10 fffff800`044... Read more

Read other 1 answers
RELEVANCY SCORE 119.2

Hi all,

Since I installed Win 7 64 bit Home on my HP 6735s laptop (originally Vista 32 bit) I keep randomly getting the DRIVER_POWER_STATE_FAILURE, it's just random so I wonder if you can help.

I also never got this in Vista though I have swapped the network card for HP's recommended Wireless N card.

? OS - Windows 7
? x64
? Original OS Vista 32 bit
? Original OS was OEM, new is Full Retail
? Approx 2 years old
? Age of OS installation - When Win 7 came out, Oct last year? Never been reinstalled.

Will attach the requested files :)

Cheers,
Paul.

A:[BSOD] Driver Power State Failure Win 7 x64

...and the perfmon file :)

Read other 9 answers
RELEVANCY SCORE 119.2

Hello
I recently have some BSOD's wich lead in reinstalling windows completly,

They when i shutdown my computer, shutting down the computer takes ages, wich lead in BSOD with i think this mssg, the computer didn't make a minidump but did create the folder.

When the computer restarts i can enter my password and then i have just a black screen with a mouse cursor.

also when i use taskmanager to startup devicemanager it doesn't show any exclamation marks in the list.

i have this computer for about 4 months now. just added the new monitor Samsung xl2370 to my setup (currently my second screen is at samsung repair center for RMA, but it's a p2370)

Is there someone who experienced the same problem here or does someone have the solution i would be glad to hear about that,

i didn't reinstall the computer yet the last time it happend. so i can search for something you might need for helping me to get a solution. is

Also my PC setup is entered, and exactly what i have in there. The memory is listed in the compatible list of ASUS. (KHX1600C9D3/6GX)

Let me know when more information is needed. mean while i'm trying to get the BSOD again with my camara pointed at my screen.

Also i can't generate the file with the perfmon /report command. it shows that it can't acces the destination file.

this is the second time i have this problem the second time was 2 days after the complete reinstall.

The number of processes that are listed is: 24
And almost all the service's that are listed ... Read more

A:BSOD Driver power state failure

  
Quote: Originally Posted by Sabertooth


Hello
I recently have some BSOD's wich lead in reinstalling windows completly,

They when i shutdown my computer, shutting down the computer takes ages, wich lead in BSOD with i think this mssg, the computer didn't make a minidump but did create the folder.

When the computer restarts i can enter my password and then i have just a black screen with a mouse cursor, when i task manager (ctrl+shift+esc) i can walk trough the folders to the minidump folder. but it shows up empty, I can't insert a usb stick in the computer nor can i use network capability's

also when i use taskmanager to startup devicemanager it doesn't show any exclamation marks in the list.

i have this computer for about 4 months now. just added the new monitor Samsung xl2370 to my setup (currently my second screen is at samsung repair center for RMA, but it's a p2370)

Is there someone who experienced the same problem here or does someone have the solution i would be glad to hear about that,

i didn't reinstall the computer yet the last time it happend. so i can search for something you might need for helping me to get a solution. is

Also my PC setup is entered, and exactly what i have in there. The memory is listed in the compatible list of ASUS. (KHX1600C9D3/6GX)

Let me know when more information is needed. mean while i'm trying to get the BSOD again with my camara pointed at my screen.

Also i can't generate the file wi... Read more

Read other 5 answers
RELEVANCY SCORE 119.2

ah.....when i try to shut down my laptop....it just shows shutting down for 5-10 minutes and then.....bang!!!
this BSOD occurs..
and i'm not able to run perfmon /report
it says an error occurred
"can't find path specified"
Help please!!

Also,I can't connect to Internet and control panel doesn't respond on starting..

A:BSOD:Driver power state failure

Skip the perfmon /report and upload the zip file

Read other 4 answers
RELEVANCY SCORE 119.2

I've been getting a driver state power failure BSOD, I have no idea where the problem is coming from. minidump is attached. It's started recently, and I've been having problems now with the game Skyrim now too.

A:Driver Power State Failure BSOD

Update: Just encountered another BSOD, this time while browsing youtube. Both minidump files attached.

Read other 1 answers
RELEVANCY SCORE 119.2

Hi,

I an getting BSOD randomly and it is driving me a little loopy.

I was getting a Internal power failure on the machine sleeping but preventing hibernation solved that. I create a task to set the power plan to my preferred plan (never sleeps) and that has solved that issue.

Now I am getting this Driver Power State Failure about 30 minutes after I turn the machine on. Full details in attached Zip File. I tried to uninstall SP1 at one point, but it said it could not uninstall everything.

Windows Debuggers says this:

Loading Dump File [C:\Windows\Minidump\041211-70512-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available
DbsSplayTreeRangeMap::Add: ignoring zero-sized range at ?00000000`00000000?
DbsSplayTreeRangeMap::Add: ignoring zero-sized range at ?fffff800`00b9c500?
Symbol search path is: srv*n:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (8 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7601.17514.amd64fre.win7sp1_rtm.101119-1850
Machine Name:
Kernel base = 0xfffff800`03204000 PsLoadedModuleList = 0xfffff800`03449e90
Debug session time: Tue Apr 12 09:41:28.605 2011 (UTC - 4:00)
System Uptime: 0 days 0:21:38.620
Loading Kernel Symbols
...............................................................
................................................................
................................................................
... Read more

A:BSOD Driver Power State Failure

I have re-attached all the details, I realise the last one was incomplete.

Read other 5 answers
RELEVANCY SCORE 119.2

OS: Win7 Pro-N x64 SP1. I do not know if there was ever another OS on this machine.

Age of system unknown. CPU is an Intel Core2 Quad Q9450, 2.66GHz. I have not reinstalled the OS, and it is unknown when the OS was last installed/repaired/reinstalled. Video card is currently an NVidia GeForce 8400 GS; it used to be an ATI Radeon HD 3650, but that board gave out and was replaced a few months before this problem started happening. MB is an Intel chipset, I don't recall the specific make/model. The computer is a custom build, so no overall manufacturer.

I seem to have a common problem; Windows 7 will take a very long time (10-20 minutes) to shut down or restart, and will eventually fail with a DRIVER_POWER_STATE_FAIL BSOD. After the dump, Windows starts right back up and shows the domain login screen. After entering credentials, there is another long wait before the desktop displays.

A:BSOD - Driver Power State Failure

Hi and Welcome to TSF

Did you install Fresh OS since the motherboard has been replaced?

When you replace a motherboard you need to install Fresh OS on the Hard Drive with the right drivers for the current motherboard

Read other 3 answers
RELEVANCY SCORE 119.2

Hey all, I'm new here, with a BSOD problem.

I have a laptop, HP dv6t Select Edition (LT070AV), I'm running Windows 7 x64 Home Premium, SP1 (came pre-installed). Just got the laptop late November, haven't reinstalled the OS, yet. The CPU is an Intel i5-2410M @ 2.3Ghz, and I have Intel HD Graphics (Integrated). The BSOD is DRIVER POWER STATE FAILURE, and this is probably the third time this has happened to this computer. This happened when I told the laptop to go to sleep, and the screen turned off, but the light around the mousepad, and the power button light were still on. I left the house, and came back to a BSOD. The 'not going to sleep' thing has happened many more times, but I usually just lose patience after about 3 minutes and force-shutdown. Any help would be appreciated! The zipped "Windows7_Vista_jcgriff2" folder is attached.

A:BSOD (DRIVER POWER STATE FAILURE)

I see that memory is being corrupted, but it's always the same 4 bits and it's always the same process. While I can't understand exactly what would cause it to corrupt those 4 bits exactly, I do have an idea that it might be your Broadcom Bluetooth driver. I see it's dated July 2010 so you'll want to go to the HP site and download any potential update for it that's present there. Note that it may be an item that's integrated into the motherboard, so if you can't find a bluetooth driver, look for chipset drivers instead.

Read other 4 answers
RELEVANCY SCORE 119.2

Hi, I have a problem with a blie blue screen.
I have a Toshiba Satellite Vista 64 amd turion x2 with OEM software. I just did a full system restore, and still have the same issue of crashes. For a while it started with seeming to be hot, then turning off, now BSOD.
OS - Vista/ x64
? What was original installed OS on system? same
? OEM version (came pre-installed on system)
? Age of system (hardware) approx 4 years
? Age of OS installation - have you re-installed the OS? two days

? CPU amd turion x2 TL-6 2ghz
? Video Card not sure
? MotherBoard
<DEVICE><DESCRIPTION>System board</DESCRIPTION><HARDWAREID>ACPI\PNP0C01</HARDWAREID></DEVICE> <DEVICE><DESCRIPTION>Motherboard resources</DESCRIPTION><HARDWAREID>ACPI\PNP0C02</HARDWAREID></DEVICE> <DEVICE><DESCRIPTION>Motherboard resources</DESCRIPTION><HARDWAREID>ACPI\PNP0C02</HARDWAREID>
? Power Supply - brand & wattage

? System Manufacturer toshiba
? Exact model number (if laptop, check label on bottom) p305d s8995e

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.0.6002.2.2.0.768.3
Locale ID: 1033
Additional information about the problem:
BCCode: 9f
BCP1: 0000000000000003
BCP2: FFFFFA800613E050
BCP3: FFFFFA80062CF060
BCP4: FFFFFA80050804C0
OS Version: 6_0_6002
Service Pack: 2_0
Product: 768_1
Files that help describe the problem:
C:\Windows\Minidump\Mini121211-03.dmp
C:\Users\Ed\AppData\Local... Read more

A:bsod driver power state failure

ati radeon video card x1250 8.401.0.

Read other 10 answers
RELEVANCY SCORE 119.2

Hey...

I have a Dell System XPS L502X. It's a Microsoft Windows 7 Home Premium edition (64 bit) Service pack 1 and I bought the laptop this July.

I've been encountering this problem since quite sometime. I close my laptop lid to put it into sleep mode, but sometimes when I open the lid, the laptop's automatically shut down. When I press the power button and start the computer it gives me a notice "Windows has recovered from an unexpected shutdown" stating Bluescreen as the cause.
I installed the bluescreen view application and it shows that the crash is caused by driver ntoskrnl.exe and the bug check code is 0x00000009f. The bug check string column says "Driver_power_state_failure".

Attaching the minidump files and the bluescreenview results.

Please help!

101011-19702-01.zip

A:BSOD Driver Power State Failure

The driver SynTP.sys is holding up your system, which is causing the crash. This is for the Synaptic Touchpad, and the file should be located \Windows\system32\DRIVERS\SynTP.sys. I noticed it's dated from Dec 2010, which is pretty dated. Check the Dell website to see if there's an update for it, as well as your BIOS. If there isn't (as in yours is the latest), you may need to contact their tech support for on update. Sometimes the techs will have a hotfix version of the driver available for specific cases. If they ask for information, provide them the following output below. Say that this is identical in every crashdump you've provided to us.


Code:
Microsoft (R) Windows Debugger Version 6.12.0002.633 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\igarvin\AppData\Local\Temp\7zO9580.tmp\121811-19593-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

DbsSplayTreeRangeMap::Add: ignoring zero-sized range at ?fffff800`00b9c3c0?
Symbol search path is: symsrv*symsrv.dll*c:\localsymbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (8 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 7601.17592.amd64fre.win7sp1_gdr.110408-1631
Machine Name:
Kernel base = 0xfffff800`03466000 PsLoadedModuleList = 0xfffff800`036ab650
Debug session time: Sun Dec 18 02:59:02.104 2011 (UTC - 5:00)
System Uptime: 0 days 3... Read more

Read other 5 answers
RELEVANCY SCORE 119.2

hello,
is the second time (after resintalling windows 7 64-bit original copy) that my PC doesn't turn off and the BSOD - Driver power state failure appears. After that, I can't log in into windows (the computer doesn't charge windows). I have attached the dmp file. i don't know how to do to solve the problem.

thank you very much

Andrea

A:BSOD - Driver power state failure

Hi and Welcome back to SF!

This is probably driver issue. Please update the following driver

Code:
iaStorV iaStorV.sys Wed Apr 08 23:57:17 2009 (49DCD76D)
It was blamed in the dmp, the date of driver is old as well, please update it right now.
Intel Matrix Storage Manager driver


Code:
ASACPI ASACPI.sys Mon Mar 28 09:30:36 2005 (42476C4C)
The 2005 version of this driver is a known BSOD cause.
Please visit this link: ASUSTeK Computer Inc.-Support- download_item_mkt
Scroll down to the Utilities category, then scroll down to the "ATK0110 driver for WindowsXP/Vista/Windows 7 32&64-bit " (it's about the 10th item down).
Download and install it.
Go to C:\Windows\System32\drivers to check and make sure that the ASACPI.sys file is date stamped from 2009 or 2010 (NOT 2005).

Please remove any CD virtualization programs such as Daemon Tools and Alcohol 120%. They use a driver, found in your dmp, sptd.sys, that is notorious for causing BSODs. Use this SPTD uninstaller when you're done: DuplexSecure - Downloads

BUGCHECK SUMMARY:

Code:
Microsoft (R) Windows Debugger Version 6.12.0002.633 X86
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\TUANTR~1\AppData\Local\Temp\Rar$DI00.205\090410-1445895-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*e:... Read more

Read other 2 answers
RELEVANCY SCORE 119.2

Hello,

I have been receiving BSODs after a new build. I have been holding off on re-installing the OS to see if there is a fix for this error. I suspect it may have something to do with my samsung 950 pro nvme drive.

? Windows 10 Home
? x64
? Original installation
? full retail version
? 2 weeks
? 2 weks
? I have not re-installed the OS

? Intel Core i5 6600k
? EVGA 780 Ti
? Asus Maximus VIII Heor
? Seasonic Snow Silent 750 watt platinum

Read other answers
RELEVANCY SCORE 119.2

? OS -Windows 7
? x64
? Vista x64 original
? Age of system ~ 4yrs
? Age of OS installation - just reinstalled about a month and a half ago
? Q6700 quad core 2.66
? 2x 8800gt
? Asus p5n-e sli
? Power Supply - xion 800watt


the blue screen usually happens after the computer hibernates or something similar. i know it happens alot more than i actually see because i come back to my computer and it will have a recovery message. if theres anything else i need to post just let me know.

A:BSOD Driver power state failure

Are you overclocking - either the system or the video card? If so, please stop until we're finished troubleshooting.

Please check the KB articles about hibernation/sleep at this link: http://www.carrona.org/bsodindx.html#0x0000009F

There are 11 memory dumps
3 different BSOD errors
and 4 different causes blamed (all are hardware or Windows drivers)
This makes a hardware failure a possibility. In particular, you have 4 STOP 0x124 errors - which are usually either hardware or compatibility based. Please follow the instructions for troubleshooting STOP 0x124 errors here: http://www.sevenforums.com/crash-loc...-what-try.html

The P5 series of motherboards tends to have issues with RAM in Win7. Please don't use the Auto setting in the BIOS - rather, visit the website of the RAM manufacturer, get their recommended settings and use them in your BIOS.

Asus doesn't completely certify your motherboard for Win7 - so you may have issues that involve compatibility. Also, in this case, there is a driver present that is a known cause of BSOD's (ASACPI.sys dated from 2005). As there are no Win7 compatible drivers listed, you'll have to download the Vista 64 bit version and install it in Comaptibility mode. Again, this will be at your own risk as there's no guarantee of compatibility.

Here's the link to the page for the driver: http://support.asus.com/download/dow...ge=en-us&os=30
Expand the Utilities section and download the "ACPI driver for ATK 0110 virtual device&quo... Read more

Read other 3 answers
RELEVANCY SCORE 119.2

I am having this BSOD since 14 days , my laptop HP dv6 6165 tx is new and a month old and i play games on it for almost 2-3 hours daily it has OEM windows 7 64 bit installed on it. I have attched the mini dump report files and the perform/report files in the attched file zip folder ,please help me.

A:BSOD Driver power state failure

Problematic software:
Code:
tuneuputilitiesapp64.exe c:\program files (x86)\tuneup utilities 2012\tuneuputilitiesapp64.exe 3972 8 200 1380 12-04-2012 08:09 12.0.2012.117 1.28 MB (1,337,664 bytes) 12-10-2011 18:14
tuneuputilitiesservice64.exe c:\program files (x86)\tuneup utilities 2012\tuneuputilitiesservice64.exe 1184 8 200 1380 12-04-2012 08:08 12.0.2012.117 1.98 MB (2,072,896 bytes) 12-10-2011 18:14
Many of us on the forums actually do not recommend automated optimization tools for Windows 7. Windows 7 does a much better job of handling its own optimization than its predecessors did. We especially do not recommend registry cleaning as an "optimization" step because automated registry cleaning causes more harm to the registry than it actually repairs.

In the future, if you need help optimizing Windows 7, please post a thread in Performance & Maintenance - Windows 7 Forums or follow the tutorial enclosed in that forum to Optimize Windows 7.
Security Software (to check that it is installed and working properly; nothing needs to be done with this information at this time):
Code:
msmpeng.exe c:\program files\microsoft security client\msmpeng.exe 684 8 200 1380 12-04-2012 08:08 4.0.1512.0 12.50 KB (12,800 bytes) 28-02-2012 12:24
msseces.exe c:\program files\microsoft security client\msseces.exe 3140 8 200 1380 12-04-2012 08:09 4.0.1512.0 1.21 MB (1,270,656 bytes) 28-02-2012 12:28


Code:
Microsoft (R) Windows Debugger Version 6.12.0002.633 AMD64
Co... Read more

Read other 9 answers
RELEVANCY SCORE 119.2

BSOD frequent error, it happens a least 3 time a day! Can someone help me please? It drives me crazy, Thank you

OS:Windows 7 Ultimate x86 Full retail
Age: year 2008? I don't know but there is a sticker on the bottom that says that.
OS install: less then 5 months old

A:BSOD Driver Power State Failure

I note you have Avast...
Avast can be a contributing cause of BSOD'S .
Please remove and replace with Microsoft Security Essentials AT LEAST TO TEST.
http://files.avast.com/files/eng/aswclear5.exe

Microsoft Security Essentials - Free Antivirus for Windows

Read other 4 answers
RELEVANCY SCORE 119.2

Hello,
I have been experiencing BSODs since I bought this cpu almost a year ago. The time between blue screens can range from a couple of hours to over a month. I use my computer mostly as a gaming laptop and most of the blue screens occur while I game. However, they have occasionally occured while I was just surfing the internet. It is always a driver power state failure blue screen. On to the cpu specs:

Alienware M17x R3
? OS - Windows 7
? 64 bit
? The OS came pre-installed
? The system is almost 1 year old, bought in august of 2011
? Dual graphics card: Intel(R) HD Graphics 3000/NVIDIA GeForce GTX 460M
? Processor: Intel(R) Core(TM) i7-2720QM CPU @ 2.20GHz, 2201 Mhz, 4 Core(s), 8 Logical Processor(s)

I heard Mcafee could cause blue screens and so I recently deleted it, however I just got a BSOD earlier today with it deleted.

A:Driver power state failure BSOD

48 hour bump

Read other 14 answers
RELEVANCY SCORE 119.2

I just got my ASUS G750 from Bestbuy a few weeks ago. I've been encountering this same BSOD since I got it (after installing programs). Lately it seems to be happening when I close a game from the battle.net app and attempt to open another. Other than that it almost seems to happen completely at random.

Thanks for the help!

A:BSOD Power State Driver Failure

Hi SnakeDoc919 & welcome to the forums ^_^,

I have analyzed your dump files and they all are of bugcheck code Driver_Power_State_Failure with the first parameter as 3. Below is analysis for informative purposes :-

Code:
**************************Thu Jun 26 03:19:19.764 2014 (UTC + 5:30)**************************Probably caused by : pci.sys

BugCheck 9F, {3, ffffe001e4732880, ffffd001624aa930, ffffe001e4759670}
BugCheck Info: DRIVER_POWER_STATE_FAILURE (9f)

BUGCHECK_STR: 0x9F

DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT

PROCESS_NAME: System

FAILURE_BUCKET_ID: 0x9F_3_ACPI_IMAGE_pci.sys

MaxSpeed: 2400

CurrentSpeed: 2394

BIOS Version G750JM.205

BIOS Release Date 02/11/2014

Manufacturer ASUSTeK COMPUTER INC.

Product Name G750JM

??????????????????????????????????????????????????????????????????????????????????????``


On further analysis, the driver blamed is the "acpi.sys" which is a Windows component, and chance of it being at fault is extremely unlikely. Below is a list of the 3rd party drivers installed on your PC and I think that the ASUS Bloatware is causing all this. I have highlighted those Asus Bloatware drivers as well.

Code:
**************************Thu Jun 26 03:19:19.764 2014 (UTC + 5:30)**************************
ASMMAP64.sys Thu Jul 2 14:43:26 2009 (4A4C7A36)
AiCharger.sys Fri Sep 23 07:34:40 2011 (4E7BE938)
btwl2cap... Read more

Read other 7 answers
RELEVANCY SCORE 119.2

Hi folks. I'm getting the Driver Power State Failure blue screen in Windows 7 x64. Here are my vitals:

It's an HP dv6-3052nr laptop with a fingerprint scanner.

? Windows 7 x64 Home Premium OEM - I have not reinstalled the OS since I got it from HP, and I am ok with doing that if need be.
? This is a brand new laptop, it's only like 2 months old at most
? Intel Core i7 720QM, 6GB ram
? ATI Mobility Radeon HD 5650
? No idea what the motherboard or power supply is

This is your run of the mill new laptop. I use it for web browsing and communication, but I use it as a music recording computer, so I have some music programs installed. Also, I have a USB audio interface for music recording as well.

The blue screen has happened twice in the last two days, and once a few days ago. I have been getting a popup dialog that says "Windows has recovered from an unexpected shutdown" on startup as well too; it happens after the blue screen error but it has also happened after I have closed the lid on the laptop. I think the cause is actually my fingerprint reader, because it has its own sleep/wake cycle and it doesn't always wake when I open my laptop up.

I have attached all requested files as per the BSOD posting instructions. I hope you guys can help me out! Thanks for everything.

Read other answers
RELEVANCY SCORE 119.2

I've been experiencing issues with my computer. It tends to blue screen and reads "Driver_POWER_STATE_FAILURE". I've tried to run some scans and diagnostics and even backed up my PC and then rebooted it with factory new settings, but it is still BSOD. I have a dump file, but I cannot post it because it says I do not have permission to open or attach it. Any help would be greatly appreciated!


Thanks!

A:Driver Power State Failure - BSOD

You need to follow these directions
We do need the DMP file as it contains the only record of the sequence of events leading up to the crash, what drivers were loaded, and what was responsible.
Please attach the DMP files to your next post not to post one.

If you are overclocking STOP

You may be able to get the DMP files without crashing by booting into safe mode (F8) with networking.

To enable us to assist you with your computer's BSOD symptoms, upload the contents of your "\Windows\Minidump" folder.

The procedure:





Quote:
* Copy the contents of \Windows\Minidump to another (temporary) location somewhere on your machine.
* Zip up the copy.
* Attach the ZIP archive to your post using the "paperclip" (file attachments) button.
*If the files are too large please upload them to a file sharing service like "Rapidshare" and put a link to them in your reply.


To ensure minidumps are enabled:





Quote:
* Go to Start, in the Search Box type: sysdm.cpl, press Enter.
* Under the Advanced tab, click on the Startup and Recovery Settings... button.
* Ensure that Automatically restart is unchecked.
* Under the Write Debugging Information header select Small memory dump (256 kB) in the dropdown box (the 256kb varies).
* Ensure that the Small Dump Directory is listed as %systemroot%\Minidump.
* OK your way out.
* Reboot if changes have been made.

Read other 3 answers
RELEVANCY SCORE 119.2

In the last couple of months, my laptop occasionally crashes while it is shutting down - it would be "Shutting Down" for 5-10 minutes - longer than usual. Then, there would be a BSOD, sometimes labelled "Driver Power State Failure". Then, it would reboot by itself.

Attached is the output from the DM Log Collector.

Please help.

A:BSOD Driver Power State Failure

Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 9F, {3, fffffa8008244e10, fffff80000b9a4d8, fffffa8007f54b30}

Probably caused by : vwifibus.sys

Followup: MachineOwner
---------

0: kd> !irp fffffa8007f54b30
Irp is active with 4 stacks 3 is current (= 0xfffffa8007f54c90)
No Mdl: No System Buffer: Thread 00000000: Irp stack trace.
cmd flg cl Device File Completion-Context
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
>[ 16, 3] 0 e1 fffffa8007693050 00000000 fffff80003119210-fffffa8003fc2010 Success Error Cancel pending
\Driver\vwifimp nt!PopSystemIrpCompletion
Args: 00016600 00000000 00000006 00000006
[ 0, 0] 0 0 00000000 00000000 00000000-fffffa8003fc2010

Args: 00000000 00000000 00000000 00000000
0: kd> lmvm vwifibus
start end module name
fffff880`056d6000 fffff880`056e3000 vwifibus (pdb symbols) c:\symcache\v... Read more

Read other 1 answers
RELEVANCY SCORE 119.2

I have been getting this random BSOD from time to time. I'm using a laptop and I'm not sure how and when this started. Occurs when the charger is either plugged or unplugged. Any help will be appreciated. Thanks

A:BSOD Driver power state failure

Make sure your dump logging is enabled.
Click Start, point to Settings, and then click Control Panel.
Double-click System.
Click the Advanced tab, and then click Settings under Startup and Recovery.
Check Write an even to the system log, and Automatically restart.
In the Write debugging information list, click Small memory dump (256k).

Location of Dumps:
C:\Windows\minidump

Allot of important info is missing from your zip, please follow Blue Screen of Death (BSOD) Posting Instructions to grab all and upload a new report here.

Read other 4 answers
RELEVANCY SCORE 119.2

I'm getting this error when the system goes to a power down state I think. If I leave it on over night next morning I have the BSOD with this error. Not sure what to do about it. I uploaded the info files.

A:BSOD Driver power state failure

Your crashes are being caused by McAfee. It has a 2008 driver attached to it. You should update to a newer version of McAfee, and if you already have, the old version may not have been completely removed. Uninstall, download a fresh copy of the most up to date installer for McAfee, and re-install McAfee to see if that resolves the crashes.

How to uninstall or reinstall supported McAfee products using the McAfee Consumer Products Removal tool (MCPR.exe)


If the above does not work, remove McAfee completely using MCPR and replace it with either of these:Microsoft Security Essentials - Free Antivirus for Windows coupled with Malwarebytes. Do not start the free trial of Malwarebytes. Just use the standalone version, update it, and scan your computer once a week with Malwarebytes and with Microsoft Security Essentials.

Good and Free system security combination.

After installing your security software, update it, and then run full scans today with each program. Report back the results of the scans.


Also, update the following driver:
Code:
fffff880`04784000 fffff880`047b6000 Rt64win7 Rt64win7.sys Thu Feb 26 02:04:13 2009 (49A65B0D)
It is your LAN driver, and you can find the update through HP Support for your model:
HP Support & Drivers | United States

You can also find it here:
Rt64win7.sys
->
Realtek

Read other 1 answers
RELEVANCY SCORE 119.2

Attachment 215373

Attachment 215374

Attachment 215382
Hey!
I often get a BSOD: Driver Power State Failure. I attached my .dmp file. BlueScreenView says it's related to halmacpi.dll and ntoskrnl.exe. I hope someone knows a solution.

System:
32-bit Windows 7 Professional
Acer 5741 notebook
2-3 years old
OS has been re?nstalled 1,5 year ago
Ridder

A:BSOD: Driver Power State Failure

Problem Devices:
Code:
Ethernet Controller PCI \ VEN_14E4 & SUBSYS_036D1025 & DEV_1692 & REV_01 \ 4 & 12119FE & 0 & 00E0 The drivers for this device are not installed.
Photosmart Premium C309g-m ROOT \ MULTIFUNCTION \ 0000 This device is disabled.
Officejet Pro 8500 A910 ROOT \ MULTIFUNCTION \ 0002 The drivers for this device are not installed.
Officejet Pro 8500 A910 ROOT \ MULTIFUNCTION \ 0003 The drivers for this device are not installed.
Virtual Serial Bus Enumerator ROOT \ SYSTEM \ 0002 39
Photosmart Premium C309g-m ROOT \ IMAGE \ 0000 This device is disabled.
The Ethernet driver and Virtual Serial Bus Enumerator drivers should be taken care of. Please make sure all drivers are installed from Acer support. If you need help determining drivers, let us know.


Security Software: ??? Make sure to install security software. I recommend either of these:Microsoft Security Essentials - Free Antivirus for Windows coupled with Malwarebytes. Do not start the free trial of Malwarebytes. Just use the standalone version, update it, and scan your computer once a week with Malwarebytes and with Microsoft Security Essentials.

Good and Free system security combination.

After installing your security software, update it, and then run full scans today with each program. Report back the results of the scans.


Problematic Software:
Code:
Start Menu\Programs\TuneUp Utilities 2011 Public:Start Menu\Programs\TuneUp Utilities 2011 Public
... Read more

Read other 5 answers
RELEVANCY SCORE 119.2

Atleast once a day i get the BSOD. Usually It will crash while im playing a game. I have attached an SFdebugfiles zip i hope this will help to resolve my issuse.

A:BSOD Driver Power State Failure

Hi Crinall & Welcome to the forums ^_^,

I have analyzed your dump files and below has been provided an analysis of the same for informative purposes :-

Code:
**************************Sun Aug 24 07:36:48.770 2014 (UTC + 5:30)**************************
Probably caused by : pci.sys

BugCheck 9F, {3, ffffe001987d5880, fffff801244d1930, ffffe001987e5b00}
BugCheck Info: DRIVER_POWER_STATE_FAILURE (9f)

BUGCHECK_STR: 0x9F

DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT

PROCESS_NAME: System

FAILURE_BUCKET_ID: 0x9F_3_ACPI_IMAGE_pci.sys

MaxSpeed: 2400

CurrentSpeed: 2394

BIOS Version G750JM.205

BIOS Release Date 02/11/2014

Manufacturer ASUSTeK COMPUTER INC.

Product Name G750JM

??????????????????????????????????????????????????????????????????????????????????????``
**************************Sat Aug 23 05:28:42.138 2014 (UTC + 5:30)**************************
Probably caused by : pci.sys

BugCheck 9F, {3, ffffe001b5dee060, ffffd001dddc6930, ffffe001b5dd6010}
BugCheck Info: DRIVER_POWER_STATE_FAILURE (9f)

BUGCHECK_STR: 0x9F

DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT

PROCESS_NAME: System

FAILURE_BUCKET_ID: 0x9F_3_ACPI_IMAGE_pci.sys

MaxSpeed: 2400

CurrentSpeed: 2394

BIOS Version G750JM.205

BIOS Release Date 02/11/2014

Manufacturer ASUSTeK COMPUTER INC.

Product Name G750JM

???????????????????????????... Read more

Read other 3 answers
RELEVANCY SCORE 119.2

i have been getting a blue screen of death when i play games. it says DRIVER_POWER_STATE_FAILURE. from my research this generally shows up during hibernation or shutdown. can anyone help?

A:driver power state failure BSOD

  
Quote: Originally Posted by salazni


i have been getting a blue screen of death when i play games. it says DRIVER_POWER_STATE_FAILURE. from my research this generally shows up during hibernation or shutdown. can anyone help?



All of these are blamed on acpi.sys. Can we get your system specs, BIOS version and date so we know what hardware we are dealing with?

Read other 3 answers