Over 1 million tech questions and answers.

driver power state failure BSOD

Q: driver power state failure BSOD

i have been getting a blue screen of death when i play games. it says DRIVER_POWER_STATE_FAILURE. from my research this generally shows up during hibernation or shutdown. can anyone help?

RELEVANCY SCORE 200
Preferred Solution: driver power state failure BSOD

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: driver power state failure BSOD

Quote: Originally Posted by salazni


i have been getting a blue screen of death when i play games. it says DRIVER_POWER_STATE_FAILURE. from my research this generally shows up during hibernation or shutdown. can anyone help?



All of these are blamed on acpi.sys. Can we get your system specs, BIOS version and date so we know what hardware we are dealing with?

Read other 3 answers
RELEVANCY SCORE 100.4

Hi,

I've been browsing the site and the internet for a sollution to my problem, but can't seem te find it. There are similar postings, but they're always just a little different. So that's why i posted the new thread.

Since a couple of days i've been experiencing troubles shutting down my PC and using my USB ports. It started when i tried to log onto my work from home. It failed and the IT guy from work told me to reinstall citrix reciever. So I did and I was able to work from home. After finishing and logging out (to get back to my own PC) I found that my USB portst didn't work anymore. I tried rebooting, but af 10 minutes of "shutting down" I got a blue screen: Driver Power State Failure with code 1000009f.

I did the following:
- tried system restore - it failed with different time stamps
- update drivers - they were all up to date the system said
- Malware Bytes, CC Cleaner, MS Essentials, Hitman pro - Did them all, had some minor stuff, fixed that, problem remained.
- SFC/scannow - no problems
- Memory check - no problems

As it is now, the only update I have left is the update to WIN10. However it has tried and failed during a few of the reboots, so that doesn't seem to be and option.

After try all different kinds of things from a lot of posts I decided to refresh my windows install. Did a lot of updating and still the problem remains. Although I now found out that USB devices that are plugged in upon startup work. Once I unplug en replug them, t... Read more

A:BSOD Driver power state failure when shutting down /failure USBports

Are you still having BSOD problem?

Read other 1 answers
RELEVANCY SCORE 100

So I have a pirated windows 8.1 which I have been using for more than a year now. Since the past one week my drivers ( especially the internet driver) keeps crashing and stops detecting any networks. Upon an attempted restart I get the Bsod for which I have attached the files ( All the minidumps.) I run a Dell 5521 R and have updated the drivers, uninstalled and reinstalled them too. Kindly help ASAP as I require my wifi urgently tomorrow.
Note: After restart the drivers get refreshed automatically and start working for sometime. And then the same issue. Please help.VATSAL-Tue_02_09_2016_101910_61.zip

Read other answers
RELEVANCY SCORE 98

BSOD frequent error, it happens a least 3 time a day! Can someone help me please? It drives me crazy, Thank you

OS:Windows 7 Ultimate x86 Full retail
Age: year 2008? I don't know but there is a sticker on the bottom that says that.
OS install: less then 5 months old

A:BSOD Driver Power State Failure

I note you have Avast...
Avast can be a contributing cause of BSOD'S .
Please remove and replace with Microsoft Security Essentials AT LEAST TO TEST.
http://files.avast.com/files/eng/aswclear5.exe

Microsoft Security Essentials - Free Antivirus for Windows

Read other 4 answers
RELEVANCY SCORE 98

Laptop works fine as long as monitor doesn't go to sleep or if computer is shutdown. After a certain period of time when monitor goes to sleep, BSOD appears and then computer restarts. If I try to shutdown the laptop, it hangs. Screen just says "Shutting Down" for approximately 10 minutes and then get BSOD. Works fine in Safe Mode. I have 2 additional files that I will have to post in the thread. Any help would be greatly appreciated.

OS - Win 7 (x64)
HP HDX Laptop purchased in November 2009 with Vista...upgraded to Win 7 in December
CPU - Intel Core 2 Duo - P7450 / 2.13 GHz
Video Card - NVIDIA GeForce 9600M GT
Not sure about motherboard and power supply data...let me know where to find it and I will post.

Thanks!

A:BSOD - Driver Power State Failure

Attached are 2 additional files.

Read other 1 answers
RELEVANCY SCORE 98

Hello,

I have a BSOD problem that states Driver Power State Failure. I read it is caused by a problem with a change in the alimentation mode or something, but this BSOD really happens randomly (last time occurred while I was reading a web page... I didn't even touch a key or the mouse).

I'm running Windows 7 32bits, my laptop is 3 or 4 months old (windows 7 was already installed).

I tried to run the batch from the "Blue Screen of Death (BSOD) Posting Instructions", but no folder is created when it's done... I followed every step (also ran the batch as an admin) so I don't know where the problem is coming from. The batch runs smoothly until the end, but there is just no folder created in my Documents folder. (I don't know if this is normal, but on the line right after "We will begin in 5 seconds..." there is a message saying that "the path hasn't been found" (my os is in french, so I don't know exactly what is the original line in english) but the batch still runs to the end).

I attached my last 3 minidumps, the perfmon file and a msinfo32.nfo file.

Thanks in advance for your help!

A:BSOD Driver Power State Failure

Please follow these instructions --> http://www.techsupportforum.com/f217...ns-452654.html

Read other 9 answers
RELEVANCY SCORE 98

Hey guys,

I recently started getting the Blue Screen with the title driver_power_state_failure every time I try to shut down or even just make it sleep. The BSoD comes up and the computer keeps running until I press on hold the Power button.
Hope somebody can help me. I have uploaded my DxDiag and the AutoRun-file(2 of them).
I tried getting the the performance-report and the file from the BSOD_Windows7_Vista_v2.64_jcgriff2_ program but when it comes to where it says Waiting for Systeminfo it gets stuck and keeps posting that message
Just say if you need something more.

My system is the following(can be found more exact in the DxDiag):

OS: Windows 7
Motherboard : GIGABYTE GA-990FXA-UD3 (rev. 1.0)
GFX : XFX Radeon HD 6970 (2 GB)
RAM : Corsair 8GB DDR3 2000MHz (2x4) XMS3
Processer-cooler : Scythe Mugen 2 rev.B SCMG-2100
PSU : Corsair Enthusiast Series TX850 V2
HDD : Samsung 1000 GB F3 32 MB
CPU : AMD Phenom II X4 965 Black Edition
CD-rom drive : Lite-On iHAS122 - DVD?RW Black

Thanks for reading, and hopefully helping!

Regards,
Sune Christensen

A:BSoD driver power state failure

Hi -

Sorry, but there is nothing I can do with the 4 files in the zip attachment - simply not enough info to go on.

Run Driver Verifier - Driver Verifier - Windows 7 & Vista (BSOD-related)

Driver Verifier needs to run 24 hours minimum or until it BSODs your system, whichever is less. Then . . .

Provide full system info - Blue Screen of Death (BSOD) Posting Instructions - Windows 7 & Vista

Also, run Speccy - http://www.filehippo.com/download_speccy
- "File" | "Publish Snapshot" | Paste URL into your next post

Regards. . .

jcgriff2

`

Read other 1 answers
RELEVANCY SCORE 98

When putting my laptop into hibernate, I've recently been getting a lot of BSoD stating there was a "Driver Power State Failure". I have no idea what is causing this or how to fix it, so as requested, below are my laptop's specs and logs attached.

? OS - Windows 7
? x64
? came installed on the computer
? Age of system: about 8 months old
? Age of OS installation - haven't reinstalled, 8 months old
? CPU - Intel Core i5 CPU M [email protected] 2.27ghz
? Video Card - NVIDIA GeForce 310m
? MotherBoard - not sure
? Power Supply - brand & wattage - not sure
The laptop is a Toshiba Satellite A505-S6020 TruBrite 16.0-Inch Laptop, so I hope that helps in some way. Please let me know if there is any more information I can provide, as this glitch is supremely annoying!

Thanks!

A:Driver Power State Failure BSOD

Possibly one or more installed drivers is not compatible with Hibernation mode.

Try updating all the drivers for your laptop model from the Toshiba support website here:
Laptop Support - Toshiba

The easier fix is to stop putting Windows into hibernation.

Read other 11 answers
RELEVANCY SCORE 98

Over the last two days I've been getting excessive amounts of BSODs, sometimes I'll get 3 or 4 in a row when trying to start up my laptop. I attached a few of the dump files and I'm hoping someone can help me out, it would be very much appreciated.
 

A:BSOD driver power state failure

jhawk90 - please place your minidump files in one Zip file.
 

Read other 1 answers
RELEVANCY SCORE 98

Hello,

i have started to get BSOD on the last couple of days. I can't think of anything newly installed or changed that might cause this. I hope that maybe you can find whats wrong from the information that I have attached.

Thanks in advance
Best regards
John

? OS - Windows 7 Ultimate SP1
? x64
? Original os Windows XP.
? retail
? Age of system less than two years
? Age of OS installation less than two years
? CPU - Intel Core2 Duo T9600
? Video Card - Nvidia Quadro NVS 160M
? MotherBoard - unknown
? Power Supply - unknown
? System Manufacturer - Dell
? Exact model number Latitude E6500

A:Driver power state failure BSOD

Hello,

It seems your Dell HSPA drivers are causing the issue. Try uninstalling the drivers for now, and if you really need the device, install these ones: Drivers and Downloads

...Summary of the dumps:

Code:

Built by: 7601.17592.amd64fre.win7sp1_gdr.110408-1631
Debug session time: Tue Aug 9 16:32:04.422 2011 (UTC - 4:00)
System Uptime: 0 days 23:44:45.475
*** WARNING: Unable to verify timestamp for Unknown_Module_00000000`00000000
Probably caused by : Unknown_Image ( ANALYSIS_INCONCLUSIVE )
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0x9F
FAILURE_BUCKET_ID: X64_0x9F_3_ANALYSIS_INCONCLUSIVE
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7601.17592.amd64fre.win7sp1_gdr.110408-1631
Debug session time: Mon Aug 8 15:05:25.831 2011 (UTC - 4:00)
System Uptime: 0 days 8:29:32.160
*** ERROR: Module load completed but symbols could not be loaded for WUDFRd.sys
*** WARNING: Unable to verify timestamp for d554gps64.sys
*** ERROR: Module load completed but symbols could not be loaded for d554gps64.sys
*** WARNING: Unable to verify timestamp for d557bus.sys
*** ERROR: Module load completed but symbols could not be loaded for d557bus.sys
Probably caused by : d557bus.sys
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0x9F
PROCESS_NAME: vlc.exe
FAILURE_BUCKET_ID: X64_0x9F_3_IMAGE_d557bus.sys
BiosReleaseDate = 07/30/2010
SystemProductName = Latitude E6500
??????????????????????????????????????... Read more

Read other 2 answers
RELEVANCY SCORE 98

I'm running Windows 7 Home Premium on an HP Pavilion Elite e9180f machine. I have an Intel core i7 processor (2.66 GHz), 9GB RAM.

I received a BSOD when Windows was shutting down. The message said "DRIVER_POWER_STATE_FAILURE".

I've attached the results of running the BSOD_Vista_v2-2_jcgriff2_.bat file and perfmon.

Thank you in advance.


Brad

A:Bsod driver power state failure

Please start by going to Device Manager and right clicking on the Microsoft Teredo Tunneling Adapter(s). Select Uninstall and let it uninstall the adapter. Don't be surprised if the adapter doesn't come back when rebooting - the only problem would be if it still shows an error condition after rebooting.

I suspect that this will fix the BSOD's, but we'll have to look at the dump files and (at a minimum) replace the networking drivers just to be sure.

....Running the dump file now.....

The dump file blames e1y62x64.sys - a component of your Intel(R) PRO/1000 Gigabit Networking Adapter

Please download a copy of the latest Windows 7 64 bit driver for this device from the Intel Download Center ( http://downloadcenter.intel.com/Default.aspx )
Then uninstall the current Intel networking driver from your system
Then install the freshly downloaded driver and monitor for further BSOD's.

Please also update this driver: 000.fcl Fri Sep 26 09:11:22 2008
It is a component of the Cyberlink program installed on your system.

Summary of the BSOD:

Code:
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Debug session time: Thu Jan 28 19:05:24.908 2010 (GMT-5)
System Uptime: 0 days 10:14:11.188
BugCheck 9F, {3, fffffa80083a6060, fffff800044e8518, fffffa800b85a790}
*** WARNING: Unable to verify timestamp for e1y62x64.sys
*** ERROR: Module load completed but symbols could not be loaded for e1y62x64.sys
Probably caused by : e1y62x64.sys
DEFAULT_BUCKET_ID: ... Read more

Read other 1 answers
RELEVANCY SCORE 98

Hello,

I am new to this forum, which I found online while searching for a fix to a BSOD I'm repeatedly having. I am hoping someone could help me out because it is getting extremely frustrating. The PC is used as a dedicated media center. So having the system go down multiple times during a movie is not fun at all.

I first noticed a problem with Win 7 about 10 or so days ago. The OS seemed to be slower than normal when logging on, but no issues other than that. Shortly thereafter when I would switch my TV input to my PC I was continually getting the login screen. I did a little research and it was suggested to change the Windows option to not restart on failure, which I did.

After making that change I noticed a repeated BSOD, with a Driver_Power_State_Failure message. The time varies on how long it will take before I get the crash, but it happens with certainty right now. Windows is also extremely slow logging in, and completely crashes after initial login frequently as well.

The only change that I can pinpoint is that I used a SATA to USB HDD converter to backup a hard drive. Well, attempted to backup. I cannot complete this due to system crashes. Also, I was having repeated system crashes with a portable HDD plugged in, and after unplugging it the system started on the next boot. This could be a coincidence, but I have not troubleshooted that further.

System Specs

? OS - Windows 7 ? x86 64bit ? What was original installed OS on system? - Win 7 Pro ? Is th... Read more

A:BSOD - Driver Power State Failure

I currently have Driver Verifier running, and installed Speccy. Link to output - http://speccy.piriform.com/results/e...uBcUrMpiUSPB2G

Read other 4 answers
RELEVANCY SCORE 98

My computer crashes randomly. Giving me the blue screen error, Driver Power State Failure. Not sure how to resolve this issue.
Assistance required ASAP.
I'm working on a senior project and my computer crashing is eating up valuable time.

A:BSOD Driver Power State Failure

Hello win7ndhlp.

You are facing some extensive network related crashes. And this is behind them all.

Code:
fffff880`031d72f8 fffff880`02ecf96eUnable to load image \SystemRoot\system32\DRIVERS\SymIMv.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for SymIMv.sys
*** ERROR: Module load completed but symbols could not be loaded for SymIMv.sys
SymIMv+0x196e
Description here: Driver Reference Table - SymIMv.sys

I dont believe that the best policy of network security is network blocking.

Uninstall Norton and all Symentec products using Norton Removal tool.
AND OMG

Code:
Start Menu\Programs\AVG 2011
Start Menu\Programs\AVG PC Tuneup 2011
Start Menu\Programs\AVG PC Tuneup 2011\Utilities
Start Menu\Programs\McAfee Security Scan Plus
What have you done! 3 AV programs at a stage, specially two crapware!!! Get rid of them at once. Uninstall AVG using AVG Remover. Uninstall McAfee Using McAfee Removal Tool. NEVER use more than one real time protection program. Use Microsoft Security Essentials as your only antivirus with windows inbuilt firewall, and free MBAM as the on demand scanner.

Download, install and update those, and then run full system scans with both of them, one by one.

For your USB network adapters (EVDO) you need to do some general USB related troubleshooting. For the port, first, uninstall and reinstall the USB ports drivers.
Right click on Computer icon > manage. It will open the computer management window.
Click on "Devi... Read more

Read other 9 answers
RELEVANCY SCORE 98

Hello, having a driver power state failure. Can't figure out the driver thats causing the problem. Any advice on fixing? Thanks

A:bsod driver power state failure

Hello soupbox.

As a test, can you disable the webcam via device manager, and see if it continues to crash, or stops?

Whatever may the result be, let us know.

Read other 4 answers
RELEVANCY SCORE 98

Hello- First-timer! Sorry, I hope this isn't a redundant post. I'm not too savy and don't understand all the lingo so go easy on me.

Backstory: This is my first post and I'm very new to the computer world (beyond the basics). I decided to try and take on my first build (everything new except PSU and case). Everything seemed fine until recently.

Problem: I keep getting the BSOD shortly after coming out of sleep mode. It mentions "Driver Power State Failure". I have read several posts claiming similar happenings but all of the replies seem very specific to people's hardware and associated drivers so I wasn't sure how to apply it to my situation. Any help is greatly appreciated.

I have attached my dump files.

Thanks!

A:BSOD - Driver Power State Failure

Hello Doonga. This crash is caused my M Audio drivers.

Code:
Irp is active with 9 stacks 7 is current (= 0xfffffa80101bc8c0)
No Mdl: No System Buffer: Thread 00000000: Irp stack trace. Pending has been returned
cmd flg cl Device File Completion-Context
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[ 16, 0] 0 0 fffffa800ee08060 00000000 fffff88004384fd4-fffffa800ee337a0
\Driver\usbhub ks!CKsDevice::CompleteDevicePowerIrp
Args: 00000000 00000000 00000000 00000002
>[ 16, 2] 0 1 fffffa800ee33c20 00000000 00000000-00000000 pending
\Driver\MAUSBFASTTRACKULTRA
Args: 00041100 00000001 00000001 00000002
[ 16, 2] 0 e1 fffffa800ee3be30 00000000 00000000-00000000 pending
\Driver\ksthunk
Args: 00041100 00000001 00000001 00000002
[ 0, 0] 0 0 00000000 00000000 00000000-fffffa800fe96220
And that is very old.

Code:
start end module nam... Read more

Read other 4 answers
RELEVANCY SCORE 98

I am having this BSOD since 14 days , my laptop HP dv6 6165 tx is new and a month old and i play games on it for almost 2-3 hours daily it has OEM windows 7 64 bit installed on it. I have attched the mini dump report files and the perform/report files in the attched file zip folder ,please help me.

A:BSOD Driver power state failure

Problematic software:
Code:
tuneuputilitiesapp64.exe c:\program files (x86)\tuneup utilities 2012\tuneuputilitiesapp64.exe 3972 8 200 1380 12-04-2012 08:09 12.0.2012.117 1.28 MB (1,337,664 bytes) 12-10-2011 18:14
tuneuputilitiesservice64.exe c:\program files (x86)\tuneup utilities 2012\tuneuputilitiesservice64.exe 1184 8 200 1380 12-04-2012 08:08 12.0.2012.117 1.98 MB (2,072,896 bytes) 12-10-2011 18:14
Many of us on the forums actually do not recommend automated optimization tools for Windows 7. Windows 7 does a much better job of handling its own optimization than its predecessors did. We especially do not recommend registry cleaning as an "optimization" step because automated registry cleaning causes more harm to the registry than it actually repairs.

In the future, if you need help optimizing Windows 7, please post a thread in Performance & Maintenance - Windows 7 Forums or follow the tutorial enclosed in that forum to Optimize Windows 7.
Security Software (to check that it is installed and working properly; nothing needs to be done with this information at this time):
Code:
msmpeng.exe c:\program files\microsoft security client\msmpeng.exe 684 8 200 1380 12-04-2012 08:08 4.0.1512.0 12.50 KB (12,800 bytes) 28-02-2012 12:24
msseces.exe c:\program files\microsoft security client\msseces.exe 3140 8 200 1380 12-04-2012 08:09 4.0.1512.0 1.21 MB (1,270,656 bytes) 28-02-2012 12:28


Code:
Microsoft (R) Windows Debugger Version 6.12.0002.633 AMD64
Co... Read more

Read other 9 answers
RELEVANCY SCORE 98

Hello everyone,

My PC was running flawlessly until I woke it from sleep one day to find out that the USB keyboard and mouse and all other USB ports are not working. I figured ok I'll just restart. Well the restart hung at "Shutting Down..." for 5 minutes+ before I got a BSOD and the system eventually rebooted.

This happened a couple of times so I thought I should update all USB drivers and I did download the latest Intel drivers and installed them. This fixed the USB ports freeze after sleep wakeup, but if I use the PC after that for 5-10 minutes, I'll get a BSOD again which you'll see in the attached zip file.

In device manager, I was seeing an error with a driver called wirelesskeyboardfilter_01, but i researched that and found it had to do with HP drivers and I don't have any. I even followed a Microsoft article to fix wirelesskeyboardfilter_01 but the problem persisted.

I would like to know which driver is causing the BSOD so that I update it/fix it.

I did a memory test and it came back with no errors and in advanced power plan settings, USB selective suspend setting is Disabled.

I would really appreciate your help and I thank you in advance.

Read other answers
RELEVANCY SCORE 98

Hey, I have been experiencing the BSOD for around 1-2 months now, its not that frequent but when it happens it consistently happens throughout the day, also after it relaunches the sound it all messed up and crackly. Im currently using the Alienware M17x which i heard it is quite common on, Any help would be greatly appreciated.

dump files in attachment


(Great my dump files are 9.37mb what can i do?)

A:BSOD - Driver state power failure

Not a clue what to do now, just found out my dump files are 9.37 MB which is over the limit you can put on here, any suggestions?

Read other 2 answers
RELEVANCY SCORE 98

I use a Lenovo laptop w/ Windows 7, and occasionally get a BSOD. Attached is the minidump file. Which driver is causing the problem? Any help would be greatly appreciated.

Thanks,

David S :-)

A:DRIVER POWER STATE FAILURE BSOD

Hi dshaw02 and Welcome to TSF,

Please follow the posting instructions found here, ZIP all the files down and attach them to your next post.

After looking through this specific BSOD a bit there are a few thing i'd like you to either inactivate or update as they're old drivers:

STREAM.SYS Tue Jul 14 01:06 : 18 2009 (4A5BCBFA)

Belongs to: Pinnacle Instant DVD recorder

AND

atikmdag.sys Mon Feb 28 16:46:24 2011 (4D6BD160)

There is a newer driver found at ATI's webpage. Uninstall this driver, reboot the machine, install the new ones.

I can't really tell more from this BSOD you've attached, i'll need all the information from the BSOD instructions. All for now is that ONE driver is calling the System Kernel, and sending an invalid command for the operating system, and then crashes.

Read other 1 answers
RELEVANCY SCORE 98

I am getting these "driver power state failure" crashes with increasing frequency. I suspect it's a driver conflict involving my M-Audio Fast Track Ultra (music recording interface), which is connected via USB.

My computer is an HP 671-340US notebook, bought in June or July 2010, with Windows 7 Home Premium (and a whole bunch of HP bloatware!) already installed. I have eliminated some of the HP crap because it constantly interrupted my work, and shut down my computer right in the middle of what I was doing, if I missed the message balloon. Don't know if that contriubuted to the problem. I updated all the drivers and Win7 yesterday and today. Crashed again this morning. No hardware upgrades; using it the way it came.

I have attached all the system specs and diagnostics reports you requested.

If I missed anything, please let me know.

Thanks!

Charlie

A:BSOD Driver Power State Failure

  
Quote: Originally Posted by jgm34787


I am getting these "driver power state failure" crashes with increasing frequency. I suspect it's a driver conflict involving my M-Audio Fast Track Ultra (music recording interface), which is connected via USB.

My computer is an HP 671-340US notebook, bought in June or July 2010, with Windows 7 Home Premium (and a whole bunch of HP bloatware!) already installed. I have eliminated some of the HP crap because it constantly interrupted my work, and shut down my computer right in the middle of what I was doing, if I missed the message balloon. Don't know if that contriubuted to the problem. I updated all the drivers and Win7 yesterday and today. Crashed again this morning. No hardware upgrades; using it the way it came.

I have attached all the system specs and diagnostics reports you requested.

If I missed anything, please let me know.

Thanks!

Charlie


Hi charlie and welcome.

You are of course correct about M-audio. It is blamed. It may be conflicting with one of the older drivers installed. I would update both M-audio and these old drivers. Some of these drivers including y our raid driver is from as far back as 2005.


Code:
iirsp.sys 12/13/2005 5:47:54 PM fffff880`015a0000 fffff880`015b1000 0x00011000 0x439f418a
nfrd960.sys 6/6/2006 5:11:48 PM fffff880`016b3000 fffff880`016c3000 0x00010000 0x4485ef94 ... Read more

Read other 2 answers
RELEVANCY SCORE 98

Hi
I have had for 2 days 20% CPU of SVchost. exe
and now a BSOD 9F Driver power state failure
Before i did this month MS update (only one critical update) and uninstalled Quicktime.
rebooted, running avira and no other virusscanner.
Any help is appeciated.
Thanks
Ar7

Read other answers
RELEVANCY SCORE 98

Hi there, since last week (as far as I remember) I've been having this problem when I try to shutdown my PC.
It takes ages on the shutdown screen and then it crashes, prompting the BSOD.
I'm attaching the files requested made by the SF tool.

A:BSOD: Driver power state failure

Hello Lugdunon.

I guess the Cam3820 PC camera device that you are using in not very much compatible with your system, and the driver is of 2008.

Code:
0: kd> !irp fffffa8006cdbc10
Irp is active with 11 stacks 9 is current (= 0xfffffa8006cdbf20)
No Mdl: No System Buffer: Thread 00000000: Irp stack trace.
cmd flg cl Device File Completion-Context
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
>[ 16, 2] 0 0 fffffa8008a97050 00000000 00000000-00000000
Unable to load image \SystemRoot\System32\Drivers\cam3820.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for cam3820.sys
*** ERROR: Module... Read more

Read other 3 answers
RELEVANCY SCORE 98

After having to do a complete system restore (automatic repair loop) my computer now comes up with the Driver Power State Failure BSOD when restarting, shutting down and turning on normally works fine.
I don't really want to try and navigate through all the windows updates as that requires a lot of restarting, and usually some sort of software conflict means it all gets put back anyway.

As far as I can remember, the 47015-01.dmp and 41125-01.dmp occurred 8 hours earlier than the file creation time, as my time zone was set to UTC-8, and i'm on GMT.

Thanks in advance.

A:BSOD- Driver State Power Failure

Lenovo HD Disk Driver needs to be updated:


Code:
1: kd> lmvm LhdX64
start end module name
fffff880`01e97000 fffff880`01ea5000 LhdX64 (deferred)
Image path: \SystemRoot\System32\DRIVERS\LhdX64.sys
Image name: LhdX64.sys
Timestamp: Mon Jan 11 10:06:58 2010 (4B4B3E92)
CheckSum: 0001784C
ImageSize: 0000E000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4


While at their site, also update Intel and NVIDIA video drivers just to be nice to the system.

Consider removing AVG as a test, if necessary.

Read other 3 answers
RELEVANCY SCORE 98

Hello,

please can you help me with this BSOD?

Thank you

Petr

A:BSOD Driver power state failure

Welcome to SevenForums.

Looks like 5U877 UVC driver for Ricoh camera is the cause of the BSOD.

Description: Driver Reference Table - 5U877.sys

Code:
kd> !irp fffffa800a7f90c0
Irp is active with 18 stacks 15 is current (= 0xfffffa800a7f9580)
No Mdl: No System Buffer: Thread 00000000: Irp stack trace.
cmd flg cl Device File Completion-Context
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000
..........
Args: 00000000 00000000 00000000 00000000
>[ 16, 2] 0 e0 fffffa8009771a00 00000000 fffff880028c3350-00000000 Success Error Cancel
\Driver\usbccgp STREAM!SCDevWakeCompletionRoutine
Args: 00000000 00000001 00000001 00000000
[ 16, 2] 0 1 fffffa80036ed050 00000000 00000000-00000000 pending
Unable to load image \SystemRoot\system32\DRIVERS\5U877.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for 5U877.sys
*** ERROR: Module load completed but symbols could not be loaded for 5U877.sys
\Driver\5U877
Args: 00000000 00000001 00000001 00000000
[ 16, 2] 0 e1 fffffa800971e660 00000000 00000000-00000000 pending
\Driver\ksthunk
Args: 00000000 00000001 00000001 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-fffffa80085d2870

Args: 00000000 00000000 00000000 00000000
0: kd> lmvm 5U877
start end module name
fffff880`0288c... Read more

Read other 1 answers
RELEVANCY SCORE 98

Hi There,

Need some help, I am getting a driver power failure followed by a blue screen of death a reboot. Not sure what the problem is, can anyone provide some advice. I have tried to attached the minidump files but have not been able to.

Thanks in advance

A:Driver power state failure BSOD

Download BlueScreenView (in Zip file)No installation required.Unzip downloaded file and double click on BlueScreenView.exe file to run the program.When scanning is done, go Edit>Select All.Go File>Save Selected Items, and save the report as BSOD.txt.Open BSOD.txt in Notepad, copy all content, and paste it into your next reply.

Read other 10 answers
RELEVANCY SCORE 98

Hi,

i got my notebook (MSI GE60) a month ago and since then i'm experiencing BSOD. It doesn't happen regularly. Sometimes it happens twice a day, sometimes nothing happens for 2 days .

Below i attached the dump files.

If any other info needed let me know.

A:BSOD: driver power state failure

two things, first Uninstall Daemon tools and then run this program:

Duplex secure

when you run the tool if the uninstall box is greyed out then your done If it is not then click it and let it uninstall. DO NOT click the install button It will install a Driver known to cause BSODs.

Second I notice that your video card driver (which is what the crash dumps are blaming as the problem) Is one of the drivers from the Dec 29 batch there are two things you can try, seeing if there is another update, I have heard tell that there is a beta driver that might solve the problem, or you can install an older driver and see if it fixes things. the drivers can be found here.

Read other 9 answers
RELEVANCY SCORE 98

I have an ASUS S56CM laptop with Windows 8.1.

For the past few days I have been getting a BSOD (Driver Power State Failure) upon start up. Leading up to this, my computer would freeze completely at random times not that often and I had to do a hard shut down to fix it.

The past three days have been identical. When turning my computer on from a completlely off state, it takes forever to start then eventually gives me the BSOD. The 0% thing never loads so I do a hard shut down and turn the computer back on. It still takes forever to start (8 minutes +) but I don't get a BSOD and am able to use the computer fine. Then when shutting down, it takes over 6-8 minutes as well. Before all this, my computer would get to the log in screen in under one minute.

I had a program called "WhoCrashed" but it hasn't logged any of the BSOD's from startup, only ones that I had when the computer was already on. For one of them, it told me the error may have been caused by iastora.sys which was the Intel Rapid Storage Technology driver. I tried to delete this as well as installing a newer version but it didn't fix anything.

A:BSOD Driver Power State Failure

Sorry for the delay in responding. There just aren't that many people who do BSOD analysis, so at times we get a bit overwhelmed!
Add to that the release of the Win10 preview and my system messing up - and I'm way behind on replying to topics. Sorry!

Do your still need help with this problem?
I will be notified if you reply to this topic and will respond within 48 hours.

Read other 8 answers
RELEVANCY SCORE 98

Hello there, I hope someone would be able to point me in the right direction of the cause of a BSOD. I have pasted the memory dump below.

Thanks in advance.
Microsoft (R) Windows Debugger Version 6.2.9200.20512 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.

Loading Dump File [C:\Users\Eden of Africa\Documents\MEMORY.DMP]
Kernel Bitmap Dump File: Only kernel address space is available
Symbol search path is: srv*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 8 Kernel Version 9200 MP (2 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 9200.16912.amd64fre.win8_gdr.140502-1507
Machine Name:
Kernel base = 0xfffff800`6ce07000 PsLoadedModuleList = 0xfffff800`6d0d3aa0
Debug session time: Wed Oct 8 07:14:18.844 2014 (UTC + 2:00)
System Uptime: 0 days 17:52:34.531
Loading Kernel Symbols
...............................................................
................................................................
...............................................................
Loading User Symbols
Loading unloaded module list
..........
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*********************************************... Read more

A:BSOD - driver power state failure - IRP

Hello, Welcome to EF!

To be able to better help you, please follow the Blue Screen of Death (BSOD) Posting Instructions

-Justin

Read other 1 answers
RELEVANCY SCORE 98

Hello, I seem to be having a bit of a problem with Windows 7. The computer seems to crash whenever Im using it. It's not limited to specific tasks... it crashes whenever it wants. When it does happen, i'll get a 0x9f error.
Not really sure what info to include but here's what I know the computer has:

Model: Sony Vaio AR250G
HDD: 180GB SATA drive (I think)
RAM: 2GB
Processor: Intel Centrino Duo
OS: Windows 7 Ultimate 32 bit

Ive attached some dump files too, I hear that they are useful.

Any help is really appreaciated.
Thanks a bunch.

A:Driver State Power Failure BSoD

It appears as if your webcam drivers are causing the issue. Please uninstall them and install the latest version.

These old drivers need to be updated:
Code:
826c0000 826fd000 ti21sony ti21sony.sys Mon Feb 20 19:32:31 2006 (43FA5F9F)
826fd000 827a7880 slim slim.sys Fri Jun 30 04:13:28 2006 (44A4DD28)
88e09000 88ec9000 iaStor iaStor.sys Tue Feb 21 19:44:28 2006 (43FBB3EC)
88efe000 88f0e780 SI3132 SI3132.sys Wed Sep 21 12:04:55 2005 (433184A7)
88f7a000 88f85080 PxHelp20 PxHelp20.sys Fri Oct 28 14:29:12 2005 (43626DF8)
88f86000 88f88880 SiWinAcc SiWinAcc.sys Mon Nov 01 15:21:31 2004 (41868CBB)
895e2000 895e3480 SiRemFil SiRemFil.sys Tue Sep 20 18:18:19 2005 (43308AAB)
8a810000 8a8d0000 dump_iaStor dump_iaStor.sys Tue Feb 21 19:44:28 2006 (43FBB3EC)
8a921000 8a925b20 AegisP AegisP.sys Mon Oct 24 10:38:50 2005 (435CF1FA)
8f421000 8f8615c0 nvlddmkm nvlddmkm.sys Tue Feb 20 20:05:48 2007 (45DB9AEC)
8f971000 8f997e00 e100b325 e100b325.sys Fri Nov 16 13:53:32 2007 (473DE72C)
8f998000 8f9c1000 Apfiltr Apfiltr.sys Tue Dec 05 06:26:00 2006 (45755748)
8fc33000 8fcd6000 stwrt stwrt.sys Tue Feb 06 13:14:55 2007 (45C8C59F)
8fd1e000 8fd4f580 HSFHWAZL HSFHWAZL.sys Tue Oct 18 19:52:32 2005 (43558AC0)
8fd57000 8fd5e580 SonyImgF SonyImgF.sys Mon Mar 06 04:38:59 2006 (440C0333)
8fe19000 8fe30000 5U870CAP 5U870CAP.sys Fri Jun 30 04:27:08 2006 (44A4E05C)
8fe34000 8ff27d00 HSF_DPV HSF_DPV.sys Tue Oct 18 19:53:21 2005 (43558AF1)
8ff2... Read more

Read other 2 answers
RELEVANCY SCORE 98

I have been using my new machine for a little over two weeks now. Twice I have come to sit down at the machine in the morning and the laptop display would correctly illuminate, while the external monitor would not. None of the windows on the screen were responsive to mouse clicks and the machine was not responsive to any of the keys on the keyboard. The mouse cursor would move.

Today I eventually got a BSOD:
DRIVER_POWER_STATE_FAILURE
STOP 0x0000009F (xxx1, xxx2, xxx3, xxx4)

I preserved the minidump and captured sysinfo. They are attached.

Any suggestions or thoughts?

A:9F: Driver Power State Failure BSoD

The dump file blames monitor.sys (a part of Windows Vista) - so I would suspect your video sub-system at this point. I would start with updating any video drivers/video related software on your system.

I notice that you had Visual Studio crashes - are you running any custom programs?

I would suggest running SFC.EXE /SCANNOW from an elevated (Run as Adminstrator) Command Prompt also.

Here's a list of outdated drivers on the system. I would update them also (NOT from Windows Update):

Code:
AtiPcie.sys Mon Nov 06 11:59:54 2006 - AMD PCIE Filter Driver for ATI PCIE chipset - AMD PCIE Filter Driver - Advanced Micro Devices Inc. (I think that this is most likely the problem)
mdmxsdk.sys Mon Jun 19 17:27:26 2006 - Conexant modem driver
rtlprot.sys Fri Apr 20 05:16:48 2007 - Realtek WLAN driver
tdcmdpst.sys Mon Dec 10 21:29:00 2007 - Toshiba ODD Writing Driver
Thpevm.SYS Mon Sep 03 21:13:06 2007 - TOSHIBA HDD Protection - Shock Sensor Driver
tos_sps64.sys Thu Nov 15 00:12:58 2007 - TOSHIBA tos_sps64 Service
TVALZ_O.SYS Thu Nov 08 22:08:41 2007 - TOSHIBA ACPI-Based Value Added Logical and General Purpose Device Driver
Memory dump:

Code:
Microsoft (R) Windows Debugger Version 6.11.0001.404 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.


Loading Dump File [C:\Users\FUBAR\TempDUMP\DATA\01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/d... Read more

Read other 7 answers
RELEVANCY SCORE 98

Hello,

About 50% of the time that I shut down my PC, it freezes on the message "Shutting down" and after a while gives me a BSOD. I also get a BSOD every now and then when I'm browsing the web. I've ran the SF diagnostic tool and will post the results here.

I also came across the following similar looking article:

Driver power State Failure

I would be extremely grateful if somebody could shed some light on the situation, I strongly believe that this is one of the main causes of my insomnia, after bankruptcy and alcoholism of course.

A:BSOD: Driver power State Failure

All of your BSODs are being caused by your graphics driver:


Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 9F, {3, fffffa8007957a10, fffff80000b9c3d8, fffffa800717ae10}

Unable to load image \SystemRoot\system32\DRIVERS\nvlddmkm.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
Probably caused by : pci.sys

Followup: MachineOwner
---------
Driver Reference Table - nvlddmkm.sys

Looking at the driver we can see it is very very old:


Code:
kd> lmvm nvlddmkm
start end module name
fffff880`0f000000 fffff880`0fc75d80 nvlddmkm T (no symbols)
Loaded symbol image file: nvlddmkm.sys
Image path: \SystemRoot\system32\DRIVERS\nvlddmkm.sys
Image name: nvlddmkm.sys
Timestamp: Sun Jul 10 18:12:46 2011 (4E1A23DE)
CheckSum: 00C7AFE4
ImageSize: 00C75D80
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
Please update the driver from here: Drivers - Download... Read more

Read other 9 answers
RELEVANCY SCORE 98

Hi all, I've been receiving a Driver Power State Failure BSOD after shutting down/restarting my machine since yesterday. I just installed the Windows 7 RC1. My shutdown is taking around 20 minutes before crashing with the BSOD. How do I find out what is causing the error and fix it? Should I post my minidump? Thanks.

A:Driver Power State Failure BSOD

If you post your mindump files someone can take a look.

Read other 9 answers
RELEVANCY SCORE 98

Hi Everyone,

Got a BSOD yesterday and want to see if you guys could help me isolate the issues. This is my first BSOD in about a week.

Actually, things used to be alot worse like a week ago, I was getting random BSODs due to the installation of a Belking Wireless Adapter. I thought I had everything resolved by uninstalling the drivers and then reinstalling under windows XP because I haven't had a BSOD since then.

Anyways, I am running Windows 7 and would appreciate any help.

Thank you,
Abad

A:BSOD Driver Power State Failure

Hi,

Got the correct files for you to look at.

Thanks again.

Read other 2 answers
RELEVANCY SCORE 98

Hi my Dell Inspiron N5110 laptop has been having the BSOD issues, these days if I shut the lid down, the laptop does not hibernate, even though the power settings are such.

I have got the blue screen a number of times, I have also restored the laptop to an earlier restore point, but it has not helped solve the problem.

I'm attaching the dump files as instructed, plz help me resolve this issue......
Thanks

A:BSOD Driver power State Failure

Welcome to SevenForums.

Please upload your msinfo32.nfo file. To get this: Start Menu -> Type msinfo32 into the Search programs and files box -> When it opens, go to File, Save -> Save as msinfo32.nfo and save in a place you will remember -> Let it finish the process of gathering and saving the system info -> Right click the .nfo file, click send to compressed (zipped) folder -> Upload the .zip file here.

The BSOD seems to be cause by HotSpot shield driver and Symantec/Norton seems to be contributing to it. (FYI, Norton is a frequent cause of BSOD-s.) I would suggest you to uninstall Norton and see if the problem persists, replace with Microsoft Security Essentials at least to test.
Norton Removal Tool
Recommended antivirus program for Windows 7 based on stability compared to others:-
Microsoft Security Essentials - Free Antivirus for Windows
Malwarebytes - The Free version
Good and Free system security combination.
Do not start the free trial of Malware Bytes; remember to deselect that option when prompted.

Run a full scan with both (separately) once downloaded, installed and updated.


Code:
0: kd> !irp fffffa80092dad50
Irp is active with 3 stacks 2 is current (= 0xfffffa80092dae68)
No Mdl: No System Buffer: Thread 00000000: Irp stack trace.
cmd flg cl Device File Completion-Context
[ 0, 0] 0 0 00000000 00000000 00000000-00000000

Args: 00000000 00000000 00000000 00000000
>[ 16, 2] 0 e1 fffffa8008782050 000000... Read more

Read other 9 answers
RELEVANCY SCORE 98

Hi all, I'm on Win 7 RTM 64 bit and have been getting driver power state failure BSoDs when trying to go into standby mode. It doesn't always BSod, sometimes it actually goes int standby, but when it fails, the monitor turns off, the fans slow down, but the computer remains on for about 5 minutes until it eventually gives a BSod. I upgraded from Vista Ultimate 64 bit about a week ago and my other problems have been solved, but the solution to this BSoD still eludes me.
I've updated all my drivers to their newest releases, made sure there are no bad drivers in device manager, and checked for unsigned drivers. The only unsigned driver I have installed is the one I forced to install, XBCD.
Attached is my minidump in zip from.
Thanks in advance.

A:Driver Power State Failure BSoD

A quick look seems to blame your Marvell Yukon drivers (yk62x64.sys) - although the Realtek networking driver (RTKVHD64.sys) on your system are very old also (Oct 07).

I would suggest downloading fresh copies of the above drivers from the Marvell and Realtek websites. Then uninstall the current one's and install the new one's.

I'm unsure about the forcing of the XBCD driver - and would recommend uninstalling it until this problem is resolved.

If you still run into problems then I'd first suspect a hardware issue with the network card - although it's still possible for other drivers/programs to affect this. If you're still getting errors after updating the drivers - then please provide the information requested in this post: http://www.techsupportforum.com/1871981-post2.html

Here's the memory dump analysis:

Code:
Microsoft (R) Windows Debugger Version 6.11.0001.404 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.


Loading Dump File [C:\Users\FUBAR-RC1-Desktop\TempDUMP\DATA\01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

DbsSplayTreeRangeMap::Add: ignoring zero-sized range at ?fffff800`00b9c550?
Symbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7100 MP (2 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7100.0.amd64fre.winmain_win7rc.090421-1700
Machine Name:
Kernel base = 0xfffff800`0305b... Read more

Read other 4 answers
RELEVANCY SCORE 98

Hello, I have had numerous BSOD's with different messages but this is my most recent one.

I have created the zip files requested in another related post. Please let me know if there is anything else needed.

Any help would be greatly appreciated, the problem is very frustrating.

Thank you,
Derek

A:BSOD - Driver Power State Failure

Hi -

I count 28 BSODs that you have had since installing Windows 7 RC on August 3, 2009. There were only 8 dumps in the zip file. I assume the other 20 were removed as a space saving measure.

The "mini" kernel dumps are by far some of the largest that I have seen -- especially for a Windows 7 x64 system. Each weighs in at just around 800k. Average is ~ 275k.

The bugcheck on the dumps is as your thread title suggests = 0x9f

0x9f (0x3,,,) = a device is blocking an IRP longer than permitted causing a driver to be in an "inconsistent state of power". The device in question is hogging the IRP, other devices cannot access it that need to; a stalemate ensues with no way out - and thus the BSOD. Either way, you lose.

IRP = I/O Request Packet

More on IRPs ---> http://en.wikipedia.org/wiki/I/O_request_packets

The non-Microsoft driver that shows up the most in the dumps as a probable cause of the BSODs is your NIC Intel Ethernet driver. I know it is the most recent one available -

Code:

e1e6232e.sys Fri Jun 05 12:08:41 2009 (4A296D39)

This driver has shown up in BSODs of others. I'm not sure of the product it belongs to. I would uninstall the relating product at least for now -

Code:

VSO Software
pcouffin.sys Tue Dec 05 06:39:30 2006 (457584A2)


I found 241 app crashes similar to this IE 8 crash going back to the day Windows 7 was installed -

Code:

Event[2]:
Log Name: Application
So... Read more

Read other 4 answers
RELEVANCY SCORE 98

Hi, I've been getting this BSOD error quite frequently now and I'm not sure what the problem is.
I've attached the zip from the SF Debug Tool.

Note: I have a modded BIOS for lower GPU voltages from
L502X modded bioses download (GPU voltages and more!)
and also have my GPU underclocked if that information is relevant.

A:BSOD Driver State Power Failure

Hi Aurum & Welcome to the forums ^_^,

I have analysed your dump files and below has been provided an analysis of the same for informative purposes :-

Code:
**************************Sat Dec 20 08:06:04.657 2014 (UTC + 5:30)**************************
Loading Dump File [C:\SysnativeBSODApps\122014-5562-01.dmp]

*** WARNING: Unable to verify timestamp for ntoskrnl.exe

*** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe

Windows 8 Kernel Version 9600 MP (8 procs) Free x64

System Uptime: 0 days 0:08:10.789

*** WARNING: Unable to verify timestamp for ntoskrnl.exe

*** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe

Probably caused by : ntoskrnl.exe ( nt+1509a0 )

BugCheck 9F, {3, ffffe000cf5eb4f0, ffffd00020775960, ffffe000d5bf2bd0}
BugCheck Info: DRIVER_POWER_STATE_FAILURE (9f)

Arguments:
Arg1: 0000000000000003, A device object has been blocking an Irp for too long a time
Arg2: ffffe000cf5eb4f0, Physical Device Object of the stack
Arg3: ffffd00020775960, nt!TRIAGE_9F_POWER on Win7 and higher, otherwise the Functional Device Object of the stack
Arg4: ffffe000d5bf2bd0, The blocked IRP
BUGCHECK_STR: 0x9F

DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT

FAILURE_BUCKET_ID: WRONG_SYMBOLS

CPUID: "Intel(R) Core(TM) i7-2630QM CPU @ 2.00GHz"

MaxSpeed: 2000

CurrentSpeed: 1995

BIOS Version A12

BIOS Release Date 09/07/2012

Manufacturer ... Read more

Read other 8 answers
RELEVANCY SCORE 98

I got a BSOD earlier and the error was "DRIVER_STATE_POWER FAILURE. Requested files attached and I also found this info in my system logs:

The computer has rebooted from a bugcheck. The bugcheck was: 0x0000009f (0x0000000000000003, 0xfffffa8007694060, 0xfffff800045e7748, 0xfffffa8008f9c680).

My system specs are available in my profile.

I hope I did everything correctly, and thanks in advance for the help!

A:Help With Driver State Power Failure BSOD

Hi GirlFriday and welcome to the forum.

Security App

Code:
avgrkx64.sys Fri Feb 8 09:14:05 2013 (51146D7D)
avgldx64.sys Fri Feb 8 09:14:24 2013 (51146D90)
avgloga.sys Fri Feb 8 09:14:29 2013 (51146D95)
avgidsha.sys Fri Feb 8 09:14:48 2013 (51146DA8)
avgmfx64.sys Fri Feb 8 09:14:48 2013 (51146DA8)
avgtdia.sys Thu Mar 21 07:50:47 2013 (514A6777)
avgidsdrivera.sys Fri Mar 29 07:40:56 2013 (5154F128)
avgtpx64.sys Tue May 7 18:38:19 2013 (5188F5BB)
Crashes indicate AVG being a possible cause. Remove AVG and replace with Microsoft Security Essentials to see if it provides more stability. Uninstallers (removal tools) for common antivirus software. Microsoft Security Essentials and Malwarebytes are recommended from a strict BSOD perspective. They do not cause blue screens on the system as other AV products do.

Microsoft Security Essentials, Free antivirus for windows and Malwarebytes Anti-Malware Free



   Information
Do not start the free trial of MalwareBytes, unselect that option when prompted.


Update and make full scans with both separately.


Start up

Keep less stuff at the start-up. Only anti-virus, this helps avoid driver conflicts and improves time to log in to windows.
Troubleshoot a Problem by Performing a Clean Startup in Windows 7 or Vista
How to Change, Add, or Remove Startup Programs in Wind... Read more

Read other 9 answers
RELEVANCY SCORE 98

For some reason, I've started having this problem again, and I can't pinpoint what is causing it. I'm getting the BSOD with the error message "Driver Power State Failure." I've tried certain things to prevent, but to no avail.

Here is my system info:

OS-Vista Home Premium SP2, 64 Bit
This is the original OS on the system
Came pre installed on the laptop
Laptop is about one year old
OS has never been re-installed

Afraid that is all I know, unless someone could tell me how to get other info (motherboard, video card, etc).

Here is the crash dump log (Had to break it into two files). I tried to get the system health report, but I couldn't get it to work.

A:BSOD-Driver Power State Failure

Hello and welcome to TSF.

Bugcheck 0x9F pointing to o2sdx64.sys:
Code:
Microsoft (R) Windows Debugger Version 6.11.0001.404 X86
Copyright (c) Microsoft Corporation. All rights reserved.


Loading Dump File [C:\Users\Devin\AppData\Local\Temp\Rar$DI00.226\Mini101509-04.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*c:\websymbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows Server 2008/Windows Vista Kernel Version 6002 (Service Pack 2) MP (2 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 6002.18005.amd64fre.lh_sp2rtm.090410-1830
Machine Name:
Kernel base = 0xfffff800`0221e000 PsLoadedModuleList = 0xfffff800`023e2dd0
Debug session time: Thu Oct 15 22:59:50.501 2009 (GMT-4)
System Uptime: 0 days 1:49:51.614
Loading Kernel Symbols
...............................................................
................................................................
.......................
Loading User Symbols
Loading unloaded module list
.....
*******************************************************************************
* *
* Bugcheck Analysis *
* *
**************************************************************************... Read more

Read other 6 answers
RELEVANCY SCORE 98

i got blue screen second time in one week, it said driver power state failure, i attached minidump file, running win 7 ultimate

Read other answers
RELEVANCY SCORE 98

Hi folks. I'm getting the Driver Power State Failure blue screen in Windows 7 x64. Here are my vitals:

It's an HP dv6-3052nr laptop with a fingerprint scanner.

? Windows 7 x64 Home Premium OEM - I have not reinstalled the OS since I got it from HP, and I am ok with doing that if need be.
? This is a brand new laptop, it's only like 2 months old at most
? Intel Core i7 720QM, 6GB ram
? ATI Mobility Radeon HD 5650
? No idea what the motherboard or power supply is

This is your run of the mill new laptop. I use it for web browsing and communication, but I use it as a music recording computer, so I have some music programs installed. Also, I have a USB audio interface for music recording as well.

The blue screen has happened twice in the last two days, and once a few days ago. I have been getting a popup dialog that says "Windows has recovered from an unexpected shutdown" on startup as well too; it happens after the blue screen error but it has also happened after I have closed the lid on the laptop. I think the cause is actually my fingerprint reader, because it has its own sleep/wake cycle and it doesn't always wake when I open my laptop up.

I have attached all requested files as per the BSOD posting instructions. I hope you guys can help me out! Thanks for everything.

Read other answers
RELEVANCY SCORE 98

First let me give a huge "THANKS" for this extremely helpful forum and service. I would not have any hope of correcting this issue on my own or without giving up my machine for a few days to an IT pro to fix it, which I do not have the luxury of time to do.

Here are my details:

? Windows 7 Professional (6.1.7601 Service Pack 1 Build 7601)
? x64
? Vista Premium (2009)
? Original Vista was installed already, Windows 7 upgrade came from a retailer and I installed it.
? Age of system (hardware) - 3 years
? Age of OS installation - have you re-installed the OS? I have not re-installed, but there are multiple copies of it because I added a new HDD and cloned the original before making the new one the primary HDD.

? CPU - Intel Core2 Duo T9550 @ 2.66GHz
? Video Card - NVidia GeForce GT 130M (1GM VRAM)
? MotherBoard - Don't know
? Power Supply - 90W, brand unknown

? ASUSTek Laptop
? N90SV


Thank you again for this service. I look forward to your diagnosis.

A:BSOD: Driver Power State Failure

From the last 9, 3 are corrupt, 3 are inconclusive, and 3 name the USB hub driver.
Do you have anything plugged into a usb port?
Is there any memory card in the card reader?(it runs off the USB hub)

athrx.sys Mon Oct 5 12:33:57 2009
Atheros AR928X Wireless Network Adapter Driver, if there is nothing from 2012 on the Asus page for your model this is the best place I know of to get it >
ATHEROS drivers for Microsoft Windows (Atheros?????)

There appears to be a USB web cam set as disabled in device manager, was this done manually by you, or did Windows do it(because of a problem)?
USB 2.0 UVC 1.3M WebCam USB\VID_064E&PID_A116\CN1316-S30B-MI03-VS-R03.01.03 This device is disabled.

I'm also seeing older AVG drivers
avgldx64.sys Thu Jun 3 1748 2010 (4C081968)
avgmfx64.sys Wed Aug 17 07:31:52 2011 (4E4BA6A8)
avgrkx64.sys Wed Feb 10 22:52:44 2010 (4B737F0C)
And
a2ddax64.sys Thu May 19 08:09:43 2011 (4DD50887)
a2dix64.sys Wed Nov 2 05:10:36 2011 (4EB1090C)
a2util64.sys Fri Oct 16 06:26:21 2009 (4AD84A4D)
EMSISOFT/A-SQUARED MALWARE-IDS UTILITY DRIVER

Are you using both programs? Is either one up to date?

ghaio.sys Mon May 30 05:34:05 2005 Way too old for a Win7 driver> ASUS NB Probe program> Check the Asus site for an update.

These are Vista era Suyin USB 2.0 Webcam drivers
sncduvc.SYS Mon Jul 7 06:30:20 2008
snp2u... Read more

Read other 11 answers
RELEVANCY SCORE 98

I just recently got a new laptop and have gotten BSOD twice now with DRIVER_POWER_STATE_FAILURE
I wasn't on the computer at the time of the errors, the first time it was on over night downloading, the second time i think it just had some folders open and google chrome.It is on Windows 7 Home Premium 64bit OEM, I've only had it for about 2 weeks.
HP Pavilion dv6-6b10tx Notebook (DV66B10TX(A3E16PA)) | Techbuy Australia
I couldn't run perfmon /report it said
An error occured while attempting to generate the report.

Access Denied.

Hope you can help!

A:BSOD Driver power state failure 9f

Code:

Microsoft (R) Windows Debugger Version 6.11.0001.404 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.


Loading Dump File [K:\BSODDmpFiles\787Bill\Windows_NT6_BSOD_jcgriff2\012712-21496-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

DbsSplayTreeRangeMap::Add: ignoring zero-sized range at ?fffff800`041733c0?
Symbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (8 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 7601.17640.amd64fre.win7sp1_gdr.110622-1506
Machine Name:
Kernel base = 0xfffff800`02c5c000 PsLoadedModuleList = 0xfffff800`02ea1670
Debug session time: Fri Jan 27 01:38:38.811 2012 (GMT-7)
System Uptime: 0 days 8:57:27.857
Loading Kernel Symbols
...............................................................
................................................................
.................................................
Loading User Symbols
Loading unloaded module list
..............
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*************************************************... Read more

Read other 9 answers
RELEVANCY SCORE 98

Hi,

I have been having a problem with multiple BSOD on my almost-new laptop (got it in November).

The blue screen will happen at completely random times, sometimes I am just surfing the web when it happens.
Today it has happened twice withing 10 minutes.
I have of course Googled it, but there seems to be a lot of different solutions, and they all rely on the mini dumps.

I have no experience when it comes to these crash dumps, but I have gathered them in a zip file and I really hope someone can see what the problem is!

My specs are as follows, please ask if you need more information:
XMG A723 Shark Gaming Edition laptop
Intel® Core™ i7 4th Generation Quad Core
NVIDIA® GeForce® GTX 765M 2GB GDDR5
3 x 204-pin SO-DIMM sockets supporting a maximum of 24GB 1600MHz DDR3 memory
Intel HD Graphics
Intel® HM87 Express Chipset
2x 9.5mm 2.5" SATA-III Drive
1x mSATA-III SSD

Thank you in advance!
- Sophie
 

A:BSOD: Driver power state failure

Read other 8 answers
RELEVANCY SCORE 98

Hello,

I made a thread about this already but no one would reply can someone help me please? I really want to get rid of this BSOD
I want to know what the problem is, thanks

http://sdrv.ms/14ltYEj

edit: windows 8

A:Driver power state failure (BSOD)

I'm late for work, please post back in order to remind me to follow up on this topic (I get email notification when you reply)>

Make sure that you have ALL available Windows Updates
While waiting, start with these free diagnostics: Initial Hardware Diagnostics

Analysis:
The following is for informational purposes only.

Code:
**************************Thu Aug 1 14:52:25.525 2013 (UTC - 4:00)**************************
Loading Dump File [C:\Users\John\SysnativeBSODApps\080113-27580-01.dmp]
Windows 8 Kernel Version 9200 MP (8 procs) Free x64
Built by: 9200.16628.amd64fre.win8_gdr.130531-1504
System Uptime:0 days 4:29:58.649
*** ERROR: Module load completed but symbols could not be loaded for partmgr.sys
*** WARNING: Unable to verify timestamp for amd_sata.sys
*** ERROR: Module load completed but symbols could not be loaded for amd_sata.sys
Probably caused by :amd_sata.sys
BugCheck 9F, {3, fffffa800e4515a0, fffff80017199770, fffffa800e4407b0}
BugCheck Info: DRIVER_POWER_STATE_FAILURE (9f)
Arguments:
Arg1: 0000000000000003, A device object has been blocking an Irp for too long a time
Arg2: fffffa800e4515a0, Physical Device Object of the stack
Arg3: fffff80017199770, nt!TRIAGE_9F_POWER on Win7, otherwise the Functional Device Object of the stack
Arg4: fffffa800e4407b0, The blocked IRP
BUGCHECK_STR: 0x9F
DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT
PROCESS_NAME: System
FAILURE_BUCKET_ID: 0x9F_3_disk_IMAGE_amd_sata.sys
BIOS Version 1503
BIOS Release Date ... Read more

Read other 1 answers
RELEVANCY SCORE 98

Hi, i'm constantly receving a BSOD on shutdown. The picture is attached.

These are my specs:
? OS - Windows 7 ?? x64 ? ? This one? ? All purchased from retailer? ? Bought it 2 months ago ? I havent reinstalled anything? ? Intel Core i5 ? Radeon HD 6490m ? HP ? ProBook 4530s

I wasn't able to retrieve the Perfmon report because it crashed. Nevertheless I joined the all the windows .dmp files.

A:BSOD Driver Power State Failure

MSINFO32 blames the drivers for your USB 3.0 controller.
Download and install this driver: http://h20000.www2.hp.com/bizsupport...tem=ob-97228-1

Most likely the above will fix the problem. If not, post back and we'll run hardware tests. Good luck!

Further info on BSOD error messages available at: http://www.carrona.org/bsodindx.html

The following info is just FYI, I've already addressed the issues that I saw in the above paragraphs:
3RD PARTY DRIVERS PRESENT IN THE DUMP FILES
- Create a System Restore Point prior to doing any of this. DO NOT mess with the drivers themselves - leave the Windows\System32\drivers directory alone unless we specifically direct you to it!
- Please either update the older drivers from the device manufacturer's website - or uninstall them from your system. Reference links are included below.
- DO NOT use Windows Update or the Update Drivers function of Device Manager.
- Please feel free to post back about any drivers that you are having difficulty locating.
- Windows Update exceptions may be noted below for Windows drivers.

Code:

iaStor.sys Wed Jan 12 20:50:12 2011 (4D2E5A54)
amdxata.sys Fri Mar 19 12:18:18 2010 (4BA3A3CA)
aswSnx.SYS Mon Nov 28 12:54:05 2011 (4ED3CABD)
btfilter.sys Tue Jan 04 04:41:55 2011 (4D22EB63)
aswTdi.SYS Mon Nov 28 12:52:18 2011 (4ED3CA52)
MfeEpePc.sys Wed Feb 09 06:59:50 2011 (4D5281B6)
hpdskflt.sys Fri May 13 14:47:02 2011 (4DCD7CA6)
sncduvc.SYS ... Read more

Read other 1 answers