Over 1 million tech questions and answers.

BSOD Enabling 2nd Core(Processor) in BIOS crashes Startup

Q: BSOD Enabling 2nd Core(Processor) in BIOS crashes Startup

Greetings Everyone,

My laptop suddenly shut down and sometimes showing Whea_Uncorrectable_Error(BSOD) on loading while logo shows up but when I disable the second core and set it to "always low" my laptop boots normally. I tried to reinstall the heat sink with new Thermal Paste(maybe this is low quality TP) but still no luck

Some relevant info:
System specs: Toshiba Satellite L505-S6959, Windows 10 x64 Enterprise, Intel(R) Core(TM)2 Duo CPU T6500, 4GB RAM DDR2, Insyde Bios 1.50

Blue Screen View has red highlight on hal.dll and ntoskrnl.exe

I think the cpu over heats or some software error
Please don't expect my reply immediately
Thanks for the reply in advance

Read other answers
RELEVANCY SCORE 200
Preferred Solution: BSOD Enabling 2nd Core(Processor) in BIOS crashes Startup

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

RELEVANCY SCORE 71.2

Okay so Windows 7 64 bit system...has started acting weird (odd freezes, shuts down, etc) tried to run Malwarebytes and this causes system to crash. Checking event viewer shows a "processor core" error. Tried running jv16 to clean up some registry issues (there weren't many, like 11 registry issues) but that seemed to work fine.

System is still crashing and I can't figure out why, not getting a BSOD report just shuts down, I've left it running without doing anything and it has been on for 20+ minutes. However, if I try to do Windows update, or Malwarebytes etc it crashes almost immediately. I'm stumped anyone with any guesses or help would be GREATLY appreciated.

I'm going to post a couple pictures, if I can, of the error report in event viewer...If you cannot read the details of the attached image I can post them separately.

Attachment 236725

Attachment 236723

Attachment 236724

Attachment 236726

A:Constant Crashes...processor core? PLEASE HELP!

http://www.sevenforums.com/crashes-d...tructions.html

Read other 9 answers
RELEVANCY SCORE 61.6

I unlocked my amd athlon II x3 445 to a phenom II x4 b45... I ran hwmonitor to see the temps, and my computer blue screened. I figured it was unstable because of this and reset the cmos in order to set it back to an athlon II x3. I set the bios settings to fail safe defaults and loaded up windows. I ran hwmonitor again to test it out, and a blue screen still occurred. Before I unlocked the 4th core I was able to use hwmonitor on a regular basis. I included the dmp file. I'm using windows 7 64 bit if that helps any. The dump file date will probably be wrong since resetting the cmos set my clock to 2001 XD...

A:hwmonitor causing bsod after resetting cmos/unlocking processor core

This one related to hardware. If we had more than one DMP we might be able to spot trends, etc.

Stop 0x124 is a hardware error

If you are overclocking try resetting your processor to standard settings and see if that helps.

If you continue to get BSOD here are some more things you may want to consider.

This is usually heat related, defective hardware, memory or even processor though it is"possible" that it is driver related (rare).






Quote:
Stop 0x124 - what it means and what to try
Synopsis:

A "stop 0x124" is fundamentally different to many other types of bluescreens because it stems from a hardware complaint.

Stop 0x124 minidumps contain very little practical information, and it is therefore necessary to approach the problem as a case of hardware in an unknown state of distress.
Generic "Stop 0x124" Troubleshooting Strategy:

1) Ensure that none of the hardware components are overclocked. Hardware that is driven beyond its design specifications - by overclocking - can malfunction in unpredictable ways.
2) Ensure that the machine is adequately cooled.
If there is any doubt, open up the side of the PC case (be mindful of any relevant warranty conditions!) and point a mains fan squarely at the motherboard. That will rule out most (lack of) cooling issues.
3) Update all hardware-related drivers: video, sound, RAID (if any), NIC... anything that interacts with a piece of hardware.
It is good practice to run ... Read more

Read other 1 answers
RELEVANCY SCORE 60.4

I am buying a new rig tomorrow, just wanted to see what you thought about it.

I have a choice between a $269 used pentium dual core vs a brand new 299 AMD Athlon? Single-Core Processor LE-1620?

Whats better and how faster is the AMD Athlon? Single-Core Processor LE-1620 vs my pentium III/600MHZ?
 

A:Pentium Dual core vs AMD Athlon Single-Core Processor LE-1620?

Depends on what the specs are with the Intel dual core and what specs you're getting with the AMD.
 

Read other 19 answers
RELEVANCY SCORE 60.4

I am looking to build my own PC as I can't afford 1,000+ to get someone to make one for me, I will be using it for gaming and communication and a little college work, I will probably be using Bullguard to protect it and OpenOffice instead of Microsoft Office with a Win 7 64bit OS.

Bearing this in mind what would be the best Processor for the Intel Core i5 3.4 GHz Quad-Core (BX80637I53570K) Processor and what would be the maximum Memory and Storage I could attach to it? ( I preferably want 8GB of Memory and 1tb of storage ) but I can be flexible.
 

A:What would be the best motherboard for a Intel Core i5 3.4 GHz Quad-Core (BX80637I53570K) Processor?

The CPU you want is the i5 3570K. That runs on the socket LGA 1155. When you are on a budget, any mid range mobo will suit your needs. Use the savings from the mobo towards a better HDD or even an SSD. You will also need a GPU.

I would recommend the ASUS P8Z77-V LK motherboard. As for RAM, 8GB is enough. As for the HDD, 1TB is great. I recommend the WD Caviar Black 1TB HDD.

Make sure you can get in a GPU.
 

Read other 37 answers
RELEVANCY SCORE 60

I have running TDA-ThinkorSwim Investing software which experiences periodic performance issues, which reeves the fan or Hard disk then locks up all performance until the TOS performance issue is acknowledged.  TOS uses an internal 7.0 Java.  typical
CPU usage is 30-45% but I have seen CPU surging usage as high as 119% with frequency at 132%.  Processing seems to halt, graphics halt or are severely retarded at best.  Using Speedfan software Seeing CPU temps. peak at 85C or 185F. 

On this higher end and equipped 64 Bit HP Envy Laptop, with a Intel(R) Core(TM) i7-4700MQ CPU @ 2.40GHz, 2401 Mhz, 4 Core(s), 8 Logical Processor(s) Machine containing an Intel HD Graphics 4600 card.   

any suggestions on how to choke off these problems? 

Read other answers
RELEVANCY SCORE 59.6

I have a Pentium D dual Core 820 2,8 GHz on my Dell E510. 1 GB RAM and Radeon XT 1600 Video card. It constantly freezes during game play(Planetside) Four sessions with Tech support have me nowhere. Can I replace processor with a fast single core on the same motherboard?
 

A:Can I replace dual core processor with single core

Read other 12 answers
RELEVANCY SCORE 59.6

Okay, here is the scenario.
There are 2 laptops.
One has a 3.0GHz single core.
The other has a 1.5GHz dual core.
The thing I'm asking is: When you buy a laptop that says it's 2.66 GHz triple core, does that mean there are 3 processors each clocked at 2.66 GHz? Or does it mean that there are 3 processors and in total they add up to 2.66 GHz?
Also, is it better to have a 3.0 GHz single core or a 1.5 GHz dual core if you want to run games?
Thanks
 

A:Solved: Which is better-Dual core or single core processor?

Read other 9 answers
RELEVANCY SCORE 59.6

Hi,

about 2 years ago I have upgraded my computer with a new motherboard, rams and a processor and since we moved in between I cannot find the boxes or bills from that time.

The problem:
I am 90 percent sure, that at the time I wanted a quad core processor and my computer properties say that I have Intel Core i5-3450.
I googled around and all retailers as well as Intel list this processor as quad, but I whenever I use aplications where cores are displayed (i.e. playclaw or some kind of benchmarking), it only ever shows core 0 and core 1.
When I go to task manager > processes > and go to select affinity on a random process, once again only 2 cores are aviable to choose from.

Any ideas what might be causing this? Because if I am not mistaken I have had my computer on a leash for 2 years...
 

A:Quad core processor acting as dual-core?

in windows 7 press the start key > type msconfig > click the boot tab > advanced options
in the top left there is a box that says number of processors. if it is checked you can uncheck it, or change the drop down box below it to 4.
 

Read other 2 answers
RELEVANCY SCORE 58.4

First and foremost thanks go out to anyone and everyone who can help me with this.

I've recently installed 7, clean install, not an upgrade. I have an Amd Athlon X2 3800+ installed and I installed 7 as a 64bit OS as well. I had this problem before 7 and could never solve it. The core doesn't show up in task manager and I've tried installing drivers from AMD, which say they are the incorrect version for the windows 7 Operating system so i installed them in compatibility mode which didn't seem to solve anything. I've uninstalled and reinstalled the processor and frankly I just don't know what to do! In Pc Wizard 2009, It tells me the number of cores is 2, but then only one core is enabled.

If anyone has any help for me that would be fantastic. Thank you! If you need any additional information please let me know.

A:Dual Core Processor, only 1 core active

SHow us your processor from device manager.

Read other 7 answers
RELEVANCY SCORE 58.4

I'm having an issue with my CPU. It seems that it is only using one of its cores. This issue first became apparent to me when I was trying to run Blacklight Retribution. It popped up a warning message saying that my computer does not meet the minimum requirements of have at least a dual core. And indeed the game was unplayable, with single digit fps constantly.

However when i go to the performance tab of my task manager it shows 4 graphs, meaning that 4 cores must be running. Then I go the boot tab of my systems configuration, click on advanced options and underneath the "Number of Processors:" check box (which is unchecked), it shows 1 as the number of processors.

My processor is an Intel(R) Xeon(TM) CPU 3.60GHz (4 CPUs), ~3.6GHz.

These seem to be conflicting and I'm not sure what to do. Please help me.

A:Quad core processor only running on one core.

This will answer it for you........
Processors - Limit Number Used by Windows 7

Read other 2 answers
RELEVANCY SCORE 58.4

Hi all,

Is it possible at all to set a program to run on one core of a dual core processor?

If so...how?

Reason for info request: My DVB-T dongle is very jittery afetr upgrading processor from Athlon 64 3500+ to Athlon 64 x2 6000+ - worked flawlessly on 3500.

Surely there must be a way to resolve this?
 

A:Single core on dual core processor?

Read other 6 answers
RELEVANCY SCORE 58.4

Firstly, in task manager, there is only one core recognised (one cpu graph). I have no option to select "one graph, multiple cpus".

Secondly, in device manager, there is only 1 core with no option to select 2 or box for detect HAL.

Lastly BIOS doesn't detect more then 1.

I have processor box unchecked and have uninstalled my CPU from device manager in hopes a restard would re-detect it. I have also updated my mobo & vid card drivers from the site and updated my bios to the latest.

I just bought COD: Black Ops for $60 and it requires a dual core processor to play it, anything else I can try short of re-installing windows?

A:Dual Core Processor detected as 1 core

just checking that you realise dual core will only show as single cpu?

Read other 9 answers
RELEVANCY SCORE 57.6

Hey all,
I have some proprietary software that works great on a single-core processor. When I try to run it on a dual-core or above, the software loads, works once, and then messes up.

The software uses modems to dial out to our payphones. We found a work-around by turning off one processor in the bios, but then, what's the point of having a dual-core processor.

Please help. The software is doing this on Windows XP.

Thanks
 

Read other answers
RELEVANCY SCORE 57.6

System specs:
Athlon 64 x2 6000+ Windsor (3ghz, 125W tdp)
Gigabyte GA-Ma770DS3 rev 1 (AMD770+SB600)
His radeon 4850 512MB (had 3870 before)
2x1GB Kingston DDR2 800mhz CL5
2xSeagate ST3500 418AS in RAID 0 on SB600
Chieftec 460W power supply.
LG DVD rewriter
Bunch of fans
Windows XP pro 32bit x2, windows 7 (temporary)

I'm having a strange problem from quite a long time. PC just reboots randomly when I use internet applications like p2p or browser. It's that I can click "favorities" in firefox and puff, reboot. Leave pc for a night - reeboot at 3 o'clock. I tried to find the cause, updated drivers, bios, reinstalled windows several times - still getting the random crashes. But, if I use the numproc=1 statement and run my PC as single core, it stays perfectly stable for week+. But sadly the low power mode doesn't work then, and CPU is getting hotter than in dual core mode, also uses more energy. However, I don't think the low power mode isn't the cause - ran a prime95 for half a day on processor tuned down to 1ghz and 1,1V (low power mode) without a crash. Ran memtest in dos mode for 8 hours - no problems.
Also I have secondary XP pro without NIC drivers installed (no web) just for gaming and I can play for 12 hours straight and never got any crash of this kind. On the the primary OS, open two windows, start unpacking archive and try to browse web and I get a crash in 3 minutes. But sometimes nothing happens for a week or so. Also I notic... Read more

Read other answers
RELEVANCY SCORE 57.2

Can any body tell me the main diff between the core 2 duo processor and core 2 duo processor with centrino.

Thanks
_______
 

A:Diff between centrino processor and core 2 duo processor

In a word nothing, the centrino branding does not refer to any specific additions to the processor, it is simply a label that is attached to laptops which use intel branded processor, integrated graphics and wireless chips.

Centrino is more of a marketing tool that Intel use to boost sales of their graphics and wireless chips, so you can pretty much ignore it
 

Read other 2 answers
RELEVANCY SCORE 57.2

I was so thrilled to find out how well my laptop would last in term of battery with Windows Server 2008 R2, and how did a server OS perfom so well instead of Windows 7.Well it was the Core parking Technology.I wish if anyone could point me to some documentation about Power Management.I found out the way to enable Core Parking in Windows 7, but I need documentation to understand some more things.To enable, go to Registry and to keyHKLM\SYSTEM\CurrentControlSet\Control\Power\PowerSettings\54533251-82be-4824-96c1-47b60b740d00and enable each subkey by changing the Attribute to 0.

A:Enabling Core Parking Technology in Windows 7

Hi,

Regarding the document about Power Management, I just got the following:

Reducing Power Consumption with Windows 7?s Power Management Features

Power Management in Windows 7 Overview

For Core Parking, I could find an article which is written in Japanese:

Windows 7 ? Core Parking ???????

Meanwhile, I would like to share the following with you:

powercfg - Useful if you know the GUIDS!

Hope this helps. Thanks.Nicholas Li - MSFT

Read other 11 answers
RELEVANCY SCORE 57.2

Hey guys,

I need to enable my dual core AMD X2 5200+

Originally I had a single core, but I have moved on to greater things lol

I need to be able to do this without reinstalling the OS.

Just as a heads up, if you find that thing from notebookforums.net or .com or something, don't link it plz, cause I tried it 3 times, and it left XP in a non-boot-able state and I had to run Ubuntu to undo everything. Or maybe I or the instructions are wrong, and they actually do work. Either way, help will be greatly appreciated.
 

A:Enabling Dual Core Support Without Reinstalling the OS

Any help at all?
 

Read other 1 answers
RELEVANCY SCORE 56.4

Hey,
I just bought a Used Radeon x1650 AGP 256MB Video Card to replace my Radeon 9200 AGP 126MB Video Card. I uninstalled the 9200 Drivers and turned the computer off. I then put the x1650 in the computer and I turned the computer on. The computer started up, beeped correctly. Gets to the BIOS or Windows Loading screen and the computer will just turn off. I took everything out of the computer (CPU, HeatSink+Fan, RAM, Video Card), cleaned the cpu, Added new thermal compound and added a different stick of RAM I had spare. I didn't put in a Video card I'm just using the Motherboards VGA. Now the computer starts up but I am missing the Video Card and More RAM. What is the problem and how can I fix it? Also it is a hot day and the CPU was a bit hot, Could this be the problem and I solved it by taking it out and cooling it down and adding new thermal compound?

Specifications
CPU: Intel Pentium D 820 2.8GHz
Motherboard: Gigabyte GA-8VM800PMD-775-RH
Link: http://www.gigabyte.com.tw/Products...roductID=2333&ProductName=GA-8VM800PMD-775-RH
PSU: 400W
RAM(Before crash): 1GB DDR2 533 + 512MB DDR2 533
RAM(Now): 512MB DDR2 533
Video Card(Before crash): ATI Radeon 9200 AGP 126MB
Video Card(After crash): Sapphire Radeon x1650 AGP 256MB
Link to (After crash) Video Card: http://www.sapphiretech.com/presentation/product/?psn=000101&pid=67

Any Information Appreciated

*Extra Info Edit: I have a 400W Psu with 1 CD Drive, 3 HDD, 2 Fans, 1 Motherboard hooked up to it and the ne... Read more

A:Solved: Computer crashes during BIOS or Windows Startup

So we can rule out my old RAM, I just reinstalled them and the computer has started up fine. Will continue to post proggys
 

Read other 1 answers
RELEVANCY SCORE 56.4

can i use that fan? they are the same socket.. LGA775.. tnx..
 

A:Can I use fan of my Dual Core for my Core 2 Duo processor?

It will probably be OK but if the replacement CPU is a higher wattage keep a carefull watch on the temperatures. Make sure you apply new thermal paste when fitting it. Use this free software to watch the temperatures, set it up so it displays the temps in the task bar.

http://www.alcpu.com/CoreTemp/
 

Read other 7 answers
RELEVANCY SCORE 56.4

Hello, i have just purchased an HP Pavilion G7 Notebook Laptop PC that is fitted with an i3-Core 2330M 2.2Ghz Processor. I would like to replace this with an Intel Core i5-2540M Laptop CPU Processor 2.6GHz 3M Cache SR044 that i have spare. Can someone tell me if this is a possible Upgrade please. I am running Windows 10 Pro 64-bit. I have already upgrade the memory by 4Gb to give me 8Gb in total of DDR3 So-dimm Memory. I am also using a 240Gb SSD Hard drive. Many thanks, Kenny Shaw 

A:Upgrade from an i3-core to an i5-core Processor

@kenny57singer To better help you we would need the exact model number or product number of your laptop/desktop??? http://h20564.www2.hp.com/hpsc/doc/public/display?docId=emr_na-c00033108 REO

Read other 1 answers
RELEVANCY SCORE 53.2

So my processor is broken, and im thinking about wich one to buy, is this i5 really better then i7 for gaming and such? the one i had in my computer wich is broken are Intel Core i7-4790K and ive been told the upgrade package Intel Core i5-6600K is better then Intel Core i7-4790K. So is this true?
 

A:Processor Intel Core i7-4790 or Intel Core i5-6600K

U have a socket 1150 motherboard???
I5-6600k is a socket 1151 processor
 

Read other 2 answers
RELEVANCY SCORE 53.2

Hello,Today I have discovered the limits of my computer self-sufficiency. I have had numerous virus and spyware related debacles over the years, but I have always been able to dig my way out myself by searching around online and finding forums like these where someone had the same problem and posted solutions. After four hours tonight, I must finally admit defeat and humbly ask for help from those smarter than I.My setup:Is a Dell Inspiron 530, running Windows XP Home, SP3The problem:Just at the completion of startup, when all desktop icons have appeared and taskbar items have loaded up, the system crashes and displays a BSOD, telling me: ""Plug and play detected an error most likely caused by a faulty driver"The stop code is: 0x000000CA (0x00000005, 0x8A8EBD98, 0x00000000, 0x00000000)I am still able to operate in Safe Mode.Background: I was browsing normally with Google Chrome, but also had IE open, as it's the only browser that works with Remote Desktop to access my work computer. I started getting pop-ups from my antivirus, Avast, indicating that intrusions from malicious sites had been prevented. I was getting a bunch of them every 30 seconds or so, so I did quick research, which suggested I had a trojan downloader trying to bring down the pain, and while Avast was stopping the intrusions, it was still highly disruptive.I updated Spybot Search and Destroy, and ran a scan, which found a dozen or so pieces of spyware/adware operating. I told Spybot to fix... Read more

A:PC crashes to BSOD at completion of startup

DownloadTDSSkillerLaunch it.Click on change parameters-Select TDLFS file systemClick on "Scan".Please post the LOG report(log file should be in your C drive) Do not change the default options on scan resultsDownloadaswMBRLaunch it, allow it to download latest Avast! virus definitionsClick the "Scan" button to start scan.After scan finishes,click on Save logPost the log results here.If you get crashes in normal mode,run it in safemode with networkingDownloadESET online scannerInstall itClick on START,it should download the virus definitionsWhen scan gets completed,click on LIST of found threatsExport the list to desktop,copy the contents of the text file in your reply

Read other 38 answers
RELEVANCY SCORE 53.2

My computer has been crashing on first startup for the last few months. I've done a bit of digging but I can't seem to find the problem. SF file attached and this is the message I got this time. It's not always the same Blue Screen message and the minidump sometimes stalls.

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.256.1
Locale ID: 6153

Additional information about the problem:
BCCode: 7f
BCP1: 00000008
BCP2: 80DC9750
BCP3: 00000000
BCP4: 00000000
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\071813-19593-01.dmp
C:\Users\Leo\AppData\Local\Temp\WER-42588-0.sysdata.xml

Read our privacy statement online:
Windows 7 Privacy Statement - Microsoft Windows

If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt
I suspect the power supply but I don't know.

A:BSOD and multiple crashes on first startup

Post this report:Activation Issue Posting Instructions

Read other 3 answers
RELEVANCY SCORE 52.4

I have a 2 and a half year old HP Pavilion P7-1020 desktop with the following specs:

Motherboard H-Alvorix-RS880-uATX
Chipset: AMD 785G (integrated ATI Radeon HD 4200 video)
Processor: AMD Phenom II X4 960T quad core
Ram: Hynix 8 gig (2 sticks of 4 gig) non ECC DDR3-1333 in slots 3 & 4 (dual channel architecture)
Integrated ALC888S-VD audio
802.11 Wireless b/g/n PCI-E Mini card
PCI Realtek RTL8105E
1 TB Seagate Barracuda 7200 rpm HD (just installed)
500w Corsair Modular PSU (just installed)
OS - Windows 7 Home Premium (64 bit)

The full computer info is located here:
HP Pavilion p7-1020 Desktop PC | HP? Support

About 3 weeks ago, the computer started crashing with BSOD's, and frozen screens which would turn into a jumble of blue and white. Quite often, after these crashes, I couldn't even boot into bios for 15 minutes. The Memtest86 tests I've run show no errors. although I didn't run 10 passes like some here recommend. I ran about 2.5 passes for 3+ hours. I also have used a video graphics memory test from a Hirens boot CD and that also showed no errors. A WD HD diagnostic of the old WD disk didn't show any bad sectors.

Eventually I decided to use the HP recovery disks (burned from the old hard drive with the HP utility several months after I first started the computer), but after choosing recovery, I realized that their recovery meant reformatting the entire hard drive and wiping all my files. I stopped it after 4% and lost the boot record in the proces... Read more

A:BSOD's, crashes and delays in being able to boot into Bios

Additional information is required.

1. Download this .BAT file to your desktop

2. Right-click the .BAT file and 'Run as Administrator'
3. Locate the .ZIP file created on your desktop, and upload it here in your next reply.

Read other 9 answers
RELEVANCY SCORE 52.4

Newbie here, I usually just looking at the forum to solve my pc problems or my friends'. I considered myself as someone who at least know generally what to do to fix pc problems. But for this case I give up and hope the good folks here could give me some clues.

There are 2 major issues here:

1. BSOD during Windows Startup
The problem
So after the loading screen loads up for some time (where you see the windows logo) it will then go straight to BSOD. This happens in random occurrence and happens like 70% of the time. Sometimes it won't go to windows at all, just keep on restarting for like 4 hours.
The error message is 0x101 "A clock interrupt was not received on a secondary processor..."
Some of the monitoring tools like hwmonitor sometimes also caused the same BSOD.
I think all the minidump files come from this error.

My solution
What I usually do is either let it reboot and pray that it goes through to windows
or I go through safe mode, uninstall the NVIDIA driver (using Display Driver Uninstaller), reboot to normal windows (it always reboot when the display driver is uninstalled), re-install the display driver and reboot. The 2nd method usually has increased chance of successfully going in to windows.

Possible root cause
- something wrong with GPU (bad copy), although I have used it around couple of months without problems whatsoever
- old PSU, unstable
- old processor

Possibly dismissed root cause
- This first happened when I started to try windows 8, thou... Read more

A:BSOD during Windows startup + Random Crashes

Hello and welcome XBABA mate am no expert and only see obvious bugcheck stuff and I cannot find anything that sticks out to me. But just for my curiosity this is your machine you are talking about ? If so and you can slip into safe mode run these if you haven't already

http://www.sevenforums.com/tutorials/1538-sfc-scannow-command-system-file-checker.html

http://www.sevenforums.com/tutorials/433-disk-check.html < use the /f and /r options in Option2 if necessary
Then have read of my ditty here

UsingHW Info PSU

Download HW Info and pick the right bit version - HWiNFO, HWiNFO32/64 -Download - (or copy andpaste this site into the search bar) If you do not need the running informationin the smaller right hand panel close it. In the left hand window click on the+ for the individual device groupings and they will open out to the variouscomponents.

Go on opening out further until you get to the device itself. click on it and itwill highlight. In the right hand window there will be a very detailed descriptionof that device as in brand, speeds model number etc etc These are very detailedand are just what is needed for searching for drivers etc.

To get the PSU volts you need to select the Sensor button circled in yellow inthe pic for PSU testing do the same and scroll down the readout as in my pic towhere it has Nuvoton = yours might be a different section name / title. Postback apic of that please.

If you want a more definitive test see this http://www.sevenforums.com/... Read more

Read other 2 answers
RELEVANCY SCORE 52.4

Ok so I have 2 laptops, the one mentioned here Supervirus and a new one. I was trying to see if swapping the hard drives would fix it, but it didn't. So I swapped them back and when I tried to turn on the new working computer I keep getting a BSOD flash for a split second before it crashes the laptop. I have many many important photos and school papers etc on it and I want to recover them ASAP. But I can't even log into the laptop because it will show the loading windows 7 animation for a few seconds, freeze, and do the BSOD then crash. I have a computer that I can use to burn any cd's or flash drives or w/e but I need to get those documents off the laptop. When I tried to do system restore the first time didn't work and gave me an error code. The second time it worked but when I tried to boot up the same thing happened. Please help

A:BSOD flashes for a second then crashes on startup after switching HDD

swapping hard drives from one computer to another will 99% of the time never work. Drivers can cause all sorts of compatibility issue.

can you boot into safe mode? (hammering F8 normally works) you can at least rescue your pictures that way, or plug it directly into a pc using a sata cable and a serial psu cable (take them both from the dvd drive will be fine)

Read other 2 answers
RELEVANCY SCORE 52.4

I am not very smart with computers and I don't really know much about them, so if anyone requires any info please kindly tell me how to give you that info. My desktop is running windows XP professional and is pretty old. Lately for a while now, my computer tends to crash suddenly a couple minutes after starting up. Sometimes it crashes after 5 to 10 minutes, and then when I turn on the computer, it will just stand at a black screen and I am have to force shutdown by holding the power button. The crashes sometimes give me a BSOD, but the BSOD's are different almost every time. I may get Page_fault_in_Non_Paged_area, Irql_not_less_or_equal, driver_Irql_not_less_or_equal, and sometimes it may show some .sys files such as atapi.sys and etc. And sometimes it decides to crash during the startup. Also, after my computer crashes...lets say.... 7~15 times, it will then stop and I can use the computer normally.

A:Multiple Crashes/BSoD frequently after startup

Please run Driver Verifier according to these instructions:  http://www.carrona.org/verifier.html As for reports, please provide these 3.  I can't recall if the last 2 work in XP (I think they do), so give them a try. 1 - Upload Dump Files:NOTE:  If using a disk cleaning utility, please stop using it while we are troubleshooting your issues.Please go to C:\Windows\Minidump and zip up the contents of the folder.  Then upload/attach the .zip file with your next post.Left click on the first minidump file.Hold down the "Shift" key and left click on the last minidump file.Right click on the blue highlighted area and select "Send to"Select "Compressed (zipped) folder" and note where the folder is saved.Upload that .zip file with your next post.If you have issues with "Access Denied" errors, try copying the files to your desktop and zipping them up from there.  If it still won't let you zip them up, post back for further advice.If you don't have anything in that folder, please check in C:\Windows for a file named MEMORY.DMP.  If you find it, zip it up and upload it to a free file hosting service.  Then post the link to it in your topic so that we can download it. Also, search your entire hard drive for files ending in .dmp, .mdmp, and .hdmp.  Zip up any that you find and upload them with your next post.Then, follow the directions here to set your system for Minidumps (much smaller than the MEMORY.DMP file):  h... Read more

Read other 1 answers
RELEVANCY SCORE 52.4

Hi there, I'm having issues with my Dell Inspiron 545MT. No matter what mode I start up my computer in (safe mode or regular settings), it'll have a BSOD during or after the Welcome screen. The BSOD seems to vary with each, ranging from IRQL_NOT_LESS_OR_EQUAL to SYSTEM_SERVICE_ERROR and sometimes doesn't display any. The STOP errors are also never constant. I can get into Safe Mode sometimes, but it's extremely random. Took around 20 tries to get in without getting BSOD'd.

The BSOD happened randomly one day while I was surfing the web. I haven't installed anything new within the past week or so or updated any drivers. Perfmon /report simply gives me an error so I can't include that in the zip file.

I've tried to narrow down the problem but my luck hasn't been too great. I tried testing my RAM one-by-one and they all seem to work fine. I removed the videocard and tried the built-in chipset and BSOD still occured. I disabled Hamachi and several hidden drivers but no luck.

My specs are as followed (in the bold)

? OS - Vista/ Windows 7 ?
? x86 (32-bit) or x64 ?
? What was original installed OS on system? Windows Vista
? Is the OS an OEM version (came pre-installed on system) or full retail version (YOU purchased it from retailer)? Received complementary Windows 7 upgrade disk with order of my computer
? Age of system (hardware) 1 Year
? Age of OS installation - have you re-installed the OS? About 6 months
? CPU Intel(R) Core(TM)2 Quad Cpu [email protected]
? Vide... Read more

A:[SOLVED] BSOD Crashes on computer startup

the lowest power we recommend is a quality 550w 80+

it could be a lot higher depending on the what model video card

Read other 4 answers
RELEVANCY SCORE 52

I have a HP Envy 15 laptop, and I have recently upgraded to windows 10. After upgrading, I have experienced two BSOD failures, both with the same error code, which was a "VIDEO_TDR_FAILURE ". It also made reference to a .sys file, although I can't remember exactly which. After each of these crashes, I've needed to restore the BIOS using the HP_TOOLS utility. While I do have a fix, I would rather solve the problem causing these crashes. 
 
Thanks in advance 

A:Repeated BSOD crashes; having to restore BIOS after each crash

Sorry for the delay in responding.
If you still need help, please do this:
 
Please provide this information so we can provide a complete analysis (from the Pinned Topic at the top of the forum):  http://www.bleepingcomputer.com/forums/t/576314/blue-screen-of-death-bsod-posting-instructions-windows-10-81-8-7-vista/
Here's more info on troubleshooting the VIDEO_TDR_FAILURE error:  Please follow these troubleshooting suggestions:  http://www.sysnative.com/forums/bsod-kernel-dump-analysis-debugging-information/35-video-tdr-timeout-0x116-0x117.html#post29532
Also, please monitor your temps with this free utility:  http://www.cpuid.com/softwares/hwmonitor.html
 

Read other 1 answers
RELEVANCY SCORE 52

Hello, new to the forum.

I've been having increasing problems with my Asus g73jh. Love the performance, but been having random crashes concerning video i assumed. Updated the graphics drivers as well as ran a bios flash on the laptop. The unit always has a problem with being moved and I just moved it for the first time in around 6 months (been using it connected to my screen in living room) to bring to class and it crashed with a page fault error when I arrived at class, then again with another bsod when I got home and unpacked it.

Asus g73jh
Windows 7 home 64 bit
2048 mb ram i333
ati mobility radeon hd 5800 series graphics
amd high definition onboard sound
598 gb hd

A:BSOD and Windows Startup Repair with random crashes

Please remove any CD visualization programs such as Daemon Tools and Alcohol 120%.

They use a driver, found in your dmp, called sptd.sys, that is notorious for causing BSODs.

Use this SPTD uninstaller DuplexSecure - Downloads DuplexSecure - FAQ

When finished you can use this Freeware:

MagicISO Virtual CD/DVD-ROM (MagicDisc) in its place

Using MagicISO to create ISO image files

Read other 9 answers
RELEVANCY SCORE 52

Hi Please help. I have just replaced my motherboard on my computer to a asrock g41m-vs3. Using the existing hard drive as soon as the windows logo starts it will crash bluescreen for 2 secs.
Now the problem with that is by looking up on the net, I need to change the sata mode. But with this asrock motherboard I have no sata mode, Cant find it. Must be just been a cheap one. So I put that hard drive in another computer did the exact thing so I changed the sata mode From AHCI to IDE and it starts works perfect.

So there noway off getting it to work on the other computer without reinstalling everything. Problem is that I need all the programs to stay installed because I am a real estate and wont be able to get a new cd key till monday.

So I tried backing up on my other computer to an image. Then found another hard drive and went into recovery mode to install the image. I have got it on a USB external hard drive. So it finds it all I click the image and it straight away says system imaged restore failed. No disk that can be used for recovery the system disk can be found.

Starting to get very annoyed. Any suggestions would be great
 

A:Replaced motherboard, Windows crashes at startup BSOD

Is this your first computer build?
 

Read other 1 answers
RELEVANCY SCORE 52

I'll post what info I think you all might need to know about my comp and I'll include the crash logs for the different types of events that I can find. It's really a mystery to me as to what driver or program is causing the issue. These are just a few of the crashes that I have on my computer it seems to contain errors with avg often in there I've been noticing and some driver. I manually went in and updated all of my drivers a few days ago and still nothing has fixed the issue.
 
 

A:Computer having crashes including BSOD and hangups on startup

1) What is new or different since the last time everything worked properly (ie, new hw, new sw, virus, error, etc)?
 
2) Download BlueScreenView:
http://www.nirsoft.net/utils/blue_screen_view.html
unzip downloaded file and double click on BlueScreenView.exe to run the program.
when scanning is done, go to EDIT - Select All
Go to FILE - SAVE Selected Items, and save the report as BSOD.txt
Open BSOD.txt in Notepad, copy all of the content, and paste it into your next reply

Read other 9 answers
RELEVANCY SCORE 52

I recently replaced and upgraded my memory from 12GB to 32GB (using Cruicial.com)

Since then, I've been having all sorts of inconsistent problems ranging from Startup issues, BSOD, crashes, memory errors.

I ran it through MEMtest and it passed. Ran it through startup diagnostics and it passed.

Still unclear if i have the right drivers since Dell's web site for my PC is so poor with info.

It may be faster to do a clean install. So, I guess I'm here to ask how to prepare for a smooth clean install that won't take 3 days of wrestling with my PC. Any tips would be appreciated.
 

A:Startup issues, BSOD, crashes, memory errors

Operating System
Windows 7 Professional 64-bit SP1
CPU
Intel Core i7 4770 @ 3.40GHz 55 C
Haswell 22nm Technology
RAM
32.0GB Dual-Channel DDR3 @ 798MHz (11-11-11-28)
Motherboard
Dell Inc. 0KWVT8 (CPU 1) 28 C
Graphics
FHX2300 ([email protected])
DELL 2009W ([email protected])
1024MB ATI AMD Radeon HD 7500 Series (Dell) 47 C
Storage
931GB Seagate ST1000DM003-1CH162 ATA Device (SATA) 33 C
931GB Seagate ST1000DM003-1CH162 ATA Device (SATA) 31 C
223GB INTEL SSDSC2BW240A4 ATA Device (SSD) 29 C
1GB Generic Flash Disk USB Device (USB)
Optical Drives
HL-DT-ST DVD+-RW GHA2N ATA Device
Audio
Line 6 TonePort UX2
--------------------------------------------------------------------------------------------------
Operating System
Windows 7 Professional 64-bit SP1
Computer type: Desktop
Installation Date: 12/2/2013 8:38:18 PM
Serial Number: 32KD2-K9CTF-M3DJT-4J3WC-733WD
Windows Security Center
User Account Control (UAC) Enabled
Notify level 2 - Default
Firewall Enabled
Windows Update
AutoUpdate Download Automatically and Install at Set Scheduled time
Schedule Frequency Every Day
Schedule Time 3:00 AM
Windows Defender
Windows Defender Disabled
Antivirus
Antivirus Enabled
Company Name Microsoft
Display Name Microsoft Security Essentials
Product Version 4.9.218.0
Virus Signature Database Up to date
.NET Frameworks installed
v4.6 Full
v4.6 Client
v3.5 SP1
v3.0 SP2
v2.0 SP2
Internet Explorer
Version 11.0.9600.18230
PowerShell
Version 2.0
Java
Java Runtime Environment
Path C:... Read more

Read other 1 answers
RELEVANCY SCORE 51.6

hey all
I did a clean Install on a new HDD yesterday, all went well I thought
it was running ok last night responsive and quick I turned her on this morning and it hung up on the boot screen then hung up on the black screen with the pointer (between log on and desktop)
finally gets up to the desk top and its black with icons, I ran msconfig
looked in boot / advanced options/ looked at my start up processors clicked number of processors where it usually offers 2 it is only giving me 1, The alert went off in my head, went to task manager, cpu usage is at 100% i am idle this makes it impossible to do anything I am at a loss what is causing this, I did nothing but install some apps like win rar and my Tune up utilities, start up is limited to what i need at start up windows ,kaspersky,and my synaptics touchpad, I am confused, any suggestions are welcome, will try uninstalling Kaspersky as a start since i have had a problem in the past......Please help!!!

A:CPU at 100% and down to 1 processor on a duo core

Did you check the bios to see if the cpu was detected correctly? Check what the cpu temperature is showing as well. If it's too high check that the cpu cooler is on properly.

Read other 2 answers
RELEVANCY SCORE 51.6

Computer Info below:

Tech Support Guy System Info Utility version 1.0.0.4
OS Version: Microsoft Windows 10 Pro, 64 bit
Processor: AMD A6-7400K Radeon R5, 6 Compute Cores 2C+4G, AMD64 Family 21 Model 48 Stepping 1
Processor Count: 2
RAM: 15313 Mb
Graphics Card: AMD Radeon(TM) R5 Graphics, 1024 Mb
Hard Drives: C: 465 GB (319 GB Free); D: 3725 GB (3492 GB Free); F: 2794 GB (1928 GB Free);
Motherboard: ASRock, FM2A68M-HD+
Antivirus: Windows Defender, Enabled and Updated

In the information above, what does "6 Compute Cores 2C+4G" mean? I bought a 6 core processer but then on the next line it says "Processor Count: 2."
 

A:6 Core Processor

It means the cpu is a dual core with four graphics cores. That cpu is ok for basic use ie web access, email, etc. The apu line from amd is NOT for any type of performance system.
 

Read other 1 answers
RELEVANCY SCORE 51.6

I have 2 Intel 5100 AGN network adapters.  Until today I had just the one but I took one out off a doner machine I have.  I want to to ICS to my phone with the second card so I installed it into the secondary port beside the existing card.  The computer runs fun but when I try to enable the 2nd card in network menue or device manager the computer crashes stating IRQL Not Less Than Or Equal ...  The computer is a Gateway p7811FX   windows 9
013016-23718-01.dmp    
1/30/2016 10:22:17 PM    
DRIVER_IRQL_NOT_LESS_OR_EQUAL    
0x000000d1    
00000000`00000016    
00000000`00000002    
00000000`00000000    
fffff800`cb3eec68    
NETwNs64.sys    
NETwNs64.sys+1d6c68    
Intel® Wireless WiFi Link Driver  
Intel® Wireless WiFi Link Adapter    
Intel Corporation    
14.2.1.2    
x64    
ntoskrnl.exe+14e2a0                    
C:\Windows\Minidump\013016-23718-01.dmp    
2   
15    
9600    
303,480    
1/30/2016 10:23:11 PM    
 

Read other answers
RELEVANCY SCORE 51.2

Hello,

Lately there are weird things going on with my computer.

Firstly, on the 07/01/2014 I had a BSOD. Details below :
71d3160702ca3f91376bc753df0c5547.png (unfortunately my MiniDump folder is empty, so this is all I can provide)

And ever since then every time I come home, and turn my computer on, I log in and after approximately 5-10 minutes, the computer shuts it self down, or freezes and I have to boot it.

Usually, my computer shuts down when I start playing a game, and freezes when I just sit on the desktop, writing on skype etc.

I have completed a SFdebugFiles and I am attaching below (It doesnt let me upload msinfo32 file)

A:BSOD, Then random computer crashes when playing, freezes on startup.

Also, would reinstalling windows system be a solution ? I was thinking about doing it anyways

Read other 9 answers
RELEVANCY SCORE 51.2

Sometimes, and more frequently lately, my windows crashes at starting windows lately. When i logged in, it takes about a minute to 5 minutes until it crashes.
but when those 5 minutes are over i can work and play the whole day without a crash.
dump files attached.

A:Please analyze these BSOD dump files - windows crashes at startup

Here is the bugcheck

Code:
BugCheck 9F, {3, fffffa80049d0a20, fffff80000b9c518, fffffa8007ee0170}
*** WARNING: Unable to verify timestamp for NETw5s64.sys
*** ERROR: Module load completed but symbols could not be loaded for NETw5s64.sys
Probably caused by : NETw5s64.sys
Followup: MachineOwner
---------
BugCheck 1E, {ffffffffc0000005, fffff8800b472970, 0, 0}
Probably caused by : tcpip.sys ( tcpip!WfpAleInsertEndpoint+4 )
Followup: MachineOwner
---------
BugCheck A, {fffffffa80091e4c, 2, 1, fffff80003c8e8fd}
Probably caused by : ntkrnlmp.exe ( nt!KeSetEvent+36d )
Followup: MachineOwner
---------
BugCheck A, {fffffffa800950dc, 2, 1, fffff80003cca24f}
Probably caused by : ntkrnlmp.exe ( nt!KiTimerWaitTest+20f )
Followup: MachineOwner
---------
One of the dump indicated internet wifi driver, NETw5s64.sys, please go to intel website to download and install fresh copy of it (Also keep in mind to uninstall previous version of driver in Computer-->manage-->device manager before install new copy)

beside that, other minidumps indicated different causes, but one of them is ffffffffc0000005, which suggest memory corruption, please download third party called memtest86, burn it to cd and let it run for at least 7 passess

Good luck and let us know if you need help

Tuan

Read other 7 answers
RELEVANCY SCORE 51.2

I don't have the option in my BIOS to enable Virtulization (enabling VT-x in BIOS). I have a HP Slimline Desktop - 450-a160. I've run a cpu scan and it does support it. But the BIOS has very limited settings. I tried updating the BIOS to: 10.1.1.9 Rev.A But that didn't help. Please advise, I really need to get this too work.

Read other answers
RELEVANCY SCORE 51.2

windows xp home edition .my computer is a fujitsu siemens scaleo p d1740.2.80 gigahertz intel pentium 4
199.63 hard drive free space,Maxtor hard drive 250 gb.samsung 40 gb.intel display adapter (not enabled) nvidia geforce 6200 (enabled.
8 kilobyte primary memory cache
512 kilobyte secondary memory cache
760 megabytes unstalled memory
slot DIMM 1 256 mb
slot DIMM 2 512 mb
C: 250 gb
d: 40 gb
recently had a sound problem(solved)but while trying to fix the problem I reset the bios to default.since then when I connect to my nvidia 6200 it just shows a message` input not supported`.I was told that I need to enable agp in the bios.I have seached the menus but cannot find anywhere to do this.in avanced I found an agp aperture setting which I have tried changing.no good.
hope some one has the answer `cos Im stumped thanks on anticipation
playbub (frank)

A:enabling agp in bios

Hi Playbub
'input not supported' would normally indicate that either the resolution or the frequensy that you have set for the card are not supported by the monitor, you can check this by starting in safe mode or in vga mode, in these modes you computer will start with the ms default drivers and settings

Read other 1 answers
RELEVANCY SCORE 51.2

Apparently I'm only running my USB 1 ports because I keep getting these "This USB device can perform faster, click here to find a high speed USB 2.0 port" messages.

After an extensive search I've come across this, http://www.techsupportforum.com/har...p4s533-x-how-upgrade-usb-1-0-ports-2-0-a.html
Apparently this link solved someones problem, it says I need to go into BIOS and enable S1, or enabling the USB 2 somehow. But I can't seem to locate where to enable S1 or any other High Speed USB. How should I go about locating this? Your guidance would mean so very much. Thank you.
Windows XP sp3
Asus P4S533 motherboard
 

A:Enabling USB 2.0 in BIOS

John - I'm not familiar with your motherboard or BIOS, however my first suggestion would be to head over to the ASUS website (http://support.asus.com/download/download.aspx) and download updated drivers. There's an update under the Utilities category called "Microsoft KB817900 USB fail to enter S3 patch file for Windows XP." Try that.

I would also make sure that your BIOS is the most recent version.

Let us know if that corrected the issue.
 

Read other 1 answers
RELEVANCY SCORE 51.2

I bought a new computer and have been trying to enable AGP through the BIOS, but the option isn't there.
I've updated the BIOS to the latest version and still no option for enabling AGP.

Anny help would be appreciated on how to enable AGP.

Thanks in advance.

(Intel i865PE <-- Mobo chipset)
(AX4SPE-UN <-- Mobo)
 

A:Enabling AGP through the BIOS

Please don't start duplicate threads for the same problem, this is closed as a duplicate, you're original is at the link below. Thanks ...

http://forums.techguy.org/t264866.html
 

Read other 1 answers
RELEVANCY SCORE 51.2

I had my laptop out for repairs, and when I got it back they had enabled the auto log on at startup. I don't like this because that way anyone could get into my computer when they turn it on.

How do I DIS-able this? I've found plenty of sites that enables it, but I don't want it on. Undoing the checkmark in the place that does it on Vista doesn't seem to do the trick.

Thanks!

A:ENABLING log on at startup

Follow this tutorial here

Read other 4 answers
RELEVANCY SCORE 51.2

I have a debate would you get Dual Core Processor yes or no ?

And why ?Pros and cons ...

What about Hyper-Threading yes or no ?

And Pros and cons
 

A:would you get Dual Core Processor yes or No

Read other 16 answers
RELEVANCY SCORE 51.2

I purchased a barebones kit from TigerDirect.com with the following motherboard and chip combo:

Intel DG965WHMKR Socket 775 Motherboard
Intel Core2 Duo E6600 2.4Ghz Socket 775

Can someone please tell me which RAM I should get (that would give me the most performance).

I know more than one type of RAM will work in my computer but I don't know which ones or what the one with the best performance will be.

Thanks!
 

A:Best RAM for w/ Core 2 Duo E6600 processor?

Here are three links to Intel that you should read carefully regarding the DG965WH board;

http://www.intel.com/products/motherboard/ddr2/index.htm

This is a link to the board's manual, please read section 1.4 carefully.

ftp://download.intel.com/design/motherbd/wh/D5600801US.pdf

Here is a link to tested memory;

http://developer.intel.com/design/motherbd/wh/wh_mem.htm

You can go further in the last link by clicking on "3rd Party Tested Memory" or
"Vendor Self Tested Memory"

Personally, I would use a memory configurator for the board at www.crucial.com or
www.kingston.com since both companies guarantee their memory to be compatible with that board, or use one of the 3rd party tested memories that have been proved compatible with the board.
 

Read other 2 answers