Over 1 million tech questions and answers.

How I print Custom Paper and Custom Margin

Q: How I print Custom Paper and Custom Margin

hellow...

I use microsoft office 2010, My first first install.
I can print my document with the custom paper.

govertment legal size paper choice is not available in ms office
The height is 33cm and not 35cm.

Now I set the print custom1 with 21.5 width and height 33cm. with each of the top margin, left, right, bottom 2cm.

when i print dialog box appears to [fix] [ignore] after I ignore. document that I printed out with the bottom margin of 4 cm (terpotong. ...)

please anyone can help me ..

RELEVANCY SCORE 200
Preferred Solution: How I print Custom Paper and Custom Margin

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: How I print Custom Paper and Custom Margin

Your paper size is called 8.5x13in.
Go to Page Layout tab - Size and scroll down to 8.5x13in and select it (see first screenshot attached).

Then on the same tab go to Margins and click Custom margins (see second screenshot attached). In the new window change margins to desired size.

Read other 1 answers
RELEVANCY SCORE 107.2

Hi, I need to print on 3.3 x 8.0 card stock.

From Page Setup, set the custom page size and margins. Margins are set
outside the printable area message comes up when I try to print.
From the print properties I try to create a custom page and get the
following errors:
"The custom paper size you have just defined will not become available
for selection until you have exited and re-entered the Printing
Preferences/Properties."
"This custom paper size could not be modified because it is currently
in use. Please close all applications and try again."
"Function address 0x4f4abe05 caused a protection fault. (exception
code 0xc0000005) The application property sheet page(s) may not
funciton properly." When you click Ok the screen goes crazy and you
have to cancel out.
This template has been used by other departments and we cannot figure
out why we cannot use it.
Thanks so very Much!
 

Read other answers
RELEVANCY SCORE 87.2

Hope this is in correct forum.

Unable to delete or add custom paper sizes for default printer in windows 7(all updates installed as of 5/22)
As seen in screen shot, there are 20 identical custom paper sizes.
How do I delete these and/or add addt'l custom paper sizes for
default(only) printer?
The only thing I haven't done is uninstall printer and then reinstall
only because it takes approx. 45 mins to reinstall!(Last resort!)

A:custom paper sizes in W7

B heavens above 45 minutes to reinstall what on earth is the printer?? It maybe just that you need to update the driver mate.

Read other 3 answers
RELEVANCY SCORE 87.2

I am not getting custom paper size when i m installing dotmatrix printer in windows XP!!!!
is ther anyway to get custom paper size in winxp??pls help me
 

A:Custom Paper Size

Read other 9 answers
RELEVANCY SCORE 86.4

Back again. *sighs*

I've got a tough one for you this time. Well, maybe.

I need to create a custom paper size for an Epson LQ-590 dotmatrix printer. Currently running Windows XP Pro, and got the latest printer driver from Epson today.

I've gone into the "Printers and Fax" window, opened the "Server Properties" window in the "File" drop down menu. In the "Forms" tab, I've created and saved the paper size I need.

I go back to the "Properties" for my Epson, get to the "advanced printing preferences" and open the dropdown menu for paper size....and my form is not there.

What the heck am I doing wrong? This is the same procedure I used for my previous printer (OkiData Microline) and everything was cool.

I suddenly don't like Epson.
 

A:Custom Paper Size for Epson LQ-590

Read other 9 answers
RELEVANCY SCORE 85.2

Help! My HP 4P Laserjet worked fine in Windows 98. I changed to XP Pro (reformatted hard drive, installed XP Pro full version) and now I cannot print on 3 x 5, 4 x 6, or 5 x 8 sizes. I downloaded and installed lj631 driver file from the HP website; problem continues. Problem exists in either MS Word or WordPerfect. I'm stumped. Anyone fixed this problem? CAHeeter
 

A:HP Laserjet 4P won't recognize custom paper shapes in XP Pro

When you say you "cannot print" on these sizes, can you actually tell us why?

What I mean is, are the sizes not in the options available, or does it give an error or...?
 

Read other 1 answers
RELEVANCY SCORE 84.4

I have an HP Officejet 6700 Premium printer and I'm trying to print a custom size sheet. Specifically a sheet that is 6" wide by 9" long. Does anyone know how to do that? I'm printing wirelessly.

On my old Officejet 6310 which was a USB printer, I could trick it into thinking it was an HP Photosmart 3300 and then specify any custom size.

Any help would be greatly appreciated.

BaileyCat
 

Read other answers
RELEVANCY SCORE 84.4

Hi fellow members,

I'm facing a problem about my printer under Windows 8.1. I cannot create custom paper size.

My previous printer is a HP P2035 printer. According to HP, the driver is built into Windows 8.1 and thus does not offer any driver for w8.1. The printer is detected correctly and I'm able to print, except I cannot create a custom paper size.

I raised this issue on the HP forum and a couple of members explained that the printer is pretty old and thus there is no incentive for Microsoft nor HP to develop a driver for Windows 8.1

Then I change to Fuji Xerox DocuPrint p355db. Again this printer is able to print just fine by Windows 8.1 built in driver, except the driver just won't allow me to create a custom paper size!

Help please.
Henry

A:Printer Driver - No Custom Paper Size Option

Hi gnulab and welcome to the forum! There is a driver for the Xerox posted on their site: Fuji Xerox Printers : Downloads

Read other 1 answers
RELEVANCY SCORE 83.6

My 8550dt does not take the inputs for custom size paper I specify in the print setup. I will specify 5x7 paper and the control panel on the printer is asking for 8 x 11.67, for example. I have tried multiple drivers. This is the 5th xerox phaser printer I have owned and have never had this problem before. I print invitations and it is very important to be able to print on different size papers. I am running Windows 7 if that may be an issue with this problem.
 

Read other answers
RELEVANCY SCORE 78.4

Ok.. I'm just throwing this out here...it's darn late hihi

I have written a 'program' (script), which will automate a recovery system for windows 7, full with a working bootmanager, (custom) partitioning, ramdisks, custom environment (winre/pe), and backup imaging , all legal and licensed according to microsoft as long as its not distributed (aka single computer [home] end user).

I decided after hourrrrssss and weeeks of reading, researching, testing, failing, testing again, reading again, installing F amounts of programs, running sysprep, MDT2010, WAIK, dism, imagex, winpe, winre, bootsect, bcdedit, you name it, I came to the conclusion.. I gotta write something up for the other poor souls around out there.

I'm not going into more details now, but I was thinking of writing this up in c++ or so and asking for donations, which will entitle support in the odd event it would not* work in your case.

However, to just test it all that it works, I wrote it in scripts (batch and vbs) which I realize now I never shall do again :P (more an OOP man myself)

I write programs normally so dealing with exceptions extensively in batch is just .... well about as time consuming as 20 % of the time I spent on R&D on all this.

Anyway, I am wondering, given I always been used to the share way, if there are people who actually are willing to donate 5 bucks or so, on a script which would take about 2 hours max to execute to set up a total personal home recovery partition system. This me... Read more

A:Easy Custom image + custom recovery OEM like system?

OKi.. update. I see now more how this program will work. shame its all working fine with .hta, .vbs and .bat.
ANyway, a full gui app will be present in windows 7 and lets a person set up all his wishes and desires for how he wishes ot have his recovery partitions system set up, incl. the option of other partitions to include in this.

When everything is done, a mikepe disk is created (a custom recovery disk which inclues a wimpe native application of this program ) which will run the precompiled settings from win 7 and will rebuild the partitions, all ready to go. It will also link this system to one single computer only (due to licensing issues and piracy protection.. I'm guessing the latter is easily hacked lol). Anyway, after that, it's all just some hours of installoing, setting up, and voila off to go.

A base windows 7 installation (no extra programs), will create a recovery partition of ~ 3 GB and will be redeploiyed all set to go with your own old account and password in less than 5 minutes.

If you add all your own programs etc, the rebuild can take up to 1 hour.

Still much faster than installing windows, changing all your settings, creating yoru account, installing all those programs... etc.

Will also I think add several boot options, as to recover damaged boot loaders, including support for adding boot entries and back up of linux, vista, xp any OS partitions. You will also be able to give the boot entries any name u fancy like:

my fancy win7 box
my rusty xp bo... Read more

Read other 3 answers
RELEVANCY SCORE 77.2

Have a user that is trying to print to a 5 x 8 sheet of paper that can be form fed into her printer (an HP LaserJet 2100). Needs to do this from both Lotus Notes and Word.

For the life of me, I can't think of a way to get a permanent form type put in so that it can be selected by her Word template to print to that particular paper size (currently it tries to print as Letter with the text flowing to the left and off the sheet of paper).
 

A:Custom print form

Read other 6 answers
RELEVANCY SCORE 76.4

I have an hp 8620 that  I am unable to print pages 1-2 of 10. Is there anyway you can help me fix this problem. Sometimes I only need a few pages and not the whole amount. Thank you

Read other answers
RELEVANCY SCORE 75.6

Hey folks

Have just tried several search terms to try to find
a previous thread related to my question to no avail, so
aplogies if there is already an answer up for this one and if
someone knows and could post the link to save time then thankyou
in advance.

I needed to print a specified range from a MS Office 2010
document today with much frustration. I searched several forums
for an answer and many seem to have been having the same problem
with Office 2010.

Here is what I tried to print only the pages I required:
P16S3-P21S3 (NO ACTION AT ALL- PRINTER REMAINS IDOL)
S3P16-S3P21 (ERROR ABOUT NOT CORRECTLY DEFINING PAGES- NO ACTION)

S3,P16-S3,P21 - this one printed, however it printed the whole of section 3.
Please note that Section 3 actually started at page 11 so what was actually printed was pages 11 -21 being the end of the document. Also note that this section was a lanscape orintated section.

Considering that I am using an inkjet and the cartridges are around $18 each for my model of printer, I was wondering if anyone could clearly explain how to print only the pages I require?

Thanking you.

A:Print Custom Range- MS Office 2010

  
Quote: Originally Posted by AllOnTheBus


S3,P16-S3,P21 - this one printed,


Using a comma ends the current term and starts the next term so S3,P16-S3,P21 would try to print S3 then P16-S3 (which would probably generate an error hence no further pages printed) and then print P21.

Of course you can always Highlight the text you want (since in this case it's all in one block) then print selection.

But s3p16-s3p21 should have worked for you, I dont know why it did not.

Read other 6 answers
RELEVANCY SCORE 75.6

Hi,

I have an Epson LQ 300+ dot matrix printer network shared from a Windows XP machine.
I use a specific custom print size (W: 21.6, H: 13.95). I have a Windows 7 machine
that uses this printer. I have added the custom print size to the Windows 7 list of
print sizes.

When I print from the Windows XP machine, it prints ok.

However, when I print it from the Windows 7 machine, it prints the stuff but form feeds
as if it was set to print to an A4 page size.

I've deleted the printer and re-added it on the Windows 7 machine and I've set the
print size to use the specific custom print size; but it still acts as if it's printing A4.

Can someone shed some light as to what's going on?
Thanks
 

A:Windows 7 ignoring custom print size

What driver are you using? One that Windows found? Or Windows 7 from Epson? Or Vista from Epson?
 

Read other 3 answers
RELEVANCY SCORE 74.8

I am trying to print a Word 2000 document that has a number of connecting text boxes (a family tree), which makes the document wider than a standard sheet of paper. (it would end up being the width of two pieces of paper side by side in a landscape formation.) Initially, to accomplish this, I went to Page Setup; under paper size, I chose "custom" and selected 22" wide by 8.5" high. Below that under Orientation, I chose Landscape.

The document is finished now and looks just right. The only thing is I can't figure out how to print it. It either prints out microscopic or if it is normal size, it only prints the part that fits on a normal size of paper. It leaves the entire right half of the document out.

What could be the solution? Thanks.
 

A:How do you print custom size word 2000 documents

I also chose "custom" and selected 22" wide by 8.5" high. Then I downloaded this http://postersw.com/ & tested it a little (copied & pasted from Word). It seemed to stretch graphics vertically, but maybe you could play around with it.

HTH,
Andy
 

Read other 2 answers
RELEVANCY SCORE 74

Hi all,

I've been trying to find a way to add my own icons to libraries that I make. I have tried navigating to:


Code:
C:\Users\Username\AppData\Roaming\Microsoft\Windows\Libraries
And after right clicking the Library I made, I don't get an option to change the icon. Is there any way to do this? It would just be easier to tell the difference between user-created libraries if the icons could be changed, instead of only using the one default icon provided.

I've tried searching through the tutorials section, and looked through the first five pages or so of results that came up from a search here on the forums, and haven't been able to find the info I'm looking for.

Thanks for any help!

A:How to add a custom icon to a custom library?

Wasn't able to find the answer on here, but did find it here:

Libraries Icons - Change

Thought I'd share for anyone else that wants to try it.

Read other 1 answers
RELEVANCY SCORE 72.4

Hi,
I'm currently working on a OKI B6500 for a local sports club.

The issue is: They regularly print score cards for the patrons
of the sports club from two different OKI printers, which are

set up to two different Computers. The B6500 is a newer model

than the other one, but some some reason, the older one prints

them fine, and the b6500 cuts the tops off each page, and

prints a second page with a single line.
The dimensions for the paper are 145 x 290.
I've tried different trays, checked all the settings within the

computer. Both printers/computers have the EXACT same

settings. The issue is very consistant, despite the changing

of the trays. Speaking to OKI support yielded no real results.
I'm really unsure as where to go from here, what am i missing?

Any help here would be greatly appreciated.


Thanks.
 

Read other answers
RELEVANCY SCORE 67.6

Upon opening sealed box from SAM's club and trying to set up, I found a paper jam when i tried to set it up with perforated paper. We don't have perforated paper in our new home so this was a frustration and surprise. I hope that HP will surprise me with compensation of a new black cartridge as this was obviously used before, refurbisheshed and sold as new.Thank you,Kitty1854

Read other answers
RELEVANCY SCORE 67.2

My final question for this week is to do with Custom Menus.

I only want users to "Exit" or "Print..." from the menu. Everything else is handled by forms.

I have the custom menu running for the Exit choice but I can;t see a "Print..." choice in the Customisation options list for the "Files" menu. I DO see "Print" but not "Print...".

The difference being that with teh elipsis, the choice of printer is provided where as the "Print" version just send the report to print. Grrr.

Is there a way to add "Print..." to a custom menu?

Can I also set "right click" on reports to do nothing? Or can I edit the right click options on a report?

Chris
 

A:Solved: Access 2003: Custom Menu - "Print..."

Bump!

Any ideas guys?

Chris
 

Read other 3 answers
RELEVANCY SCORE 63.6

Some web sites have text that I wish to save by printing. Sometimes the print on the right is lost for 3 or 4 characters. Sometimes I can get all the words onto my paper by changing the setting on my (HP) printer from Portrait to Landscape. Is there a way to get all the characters in Portrait?
 

A:Lost print right margin

Read other 6 answers
RELEVANCY SCORE 62.8

I'm using WORD XP under Windows XP Home. Recently, when I start to print a document, I sometimes get an error message saying the area to be printed is outside the printable margins. It looks fine on the print preview but when I print it, the text is shifted about 2" to the right from the left margin and does run off the page on the right. My wife found that turning off the "Allow A4/Letter Paper Resizing" option resolved the problem temporarily. After a few days it reappeared, at which time I found that turning the option back on fixed it. Apparently toggling this option fixes the problem temporarily. There may be other options that would work also since this particular one doesn't seem to be related directly to the margins.
Has anyone else experienced this problem?
 

A:WORD XP Print Margin Problem

You say the problem was fixed temporarily by toggling "Allow A4/Letter Paper Resizing". Does this mean the same Word document's margins suddenly changed, or was it 2 different documents?

If it is occurring with different documents, it sounds as though some were created and saved on A4 size (21cm x 29.7cm the standard paper size for UK) and some in Letter size (I think the standard size for USA = 21.59cm x 27.94cm).
The reason for this could be that you are viewing some documents originating from different countries. Alternatively, as Microsoft is a US company, I think the default paper size is "Letter" - even if you're in the UK.

The size differences may account for the margin shift.

Gram
 

Read other 3 answers
RELEVANCY SCORE 62.8

when I try to print emails from aol7(just upgraded from aol6),bit behind the times I`m afraid! the left hand margin knocks out some of the characters.operating system is win98se.can anybody help please?system is p1/233 with 128 meg sdram.8gig harddrive-told you I `m behind the times.
 

Read other answers
RELEVANCY SCORE 61.6

Hello everyone,

PLEASE help!

About 50% of the time, when printing Word 2007 documents with comments added in bubbles in the margin, the comment bubbles fail to print EVEN WHEN I have "print with markup" selected in the print dialog.

The grey area on which the bubbles should print is printed, but the comment isn't; instead the commentator's initials are printed inline.

I thought it was the printer, but it also happens when printing to pdf or saving to pdf.

I thought at one point it was that most my documents are, though I use Word 2007, in Word 97-2003 format. But the same problem has just occurred with a Word 2007 document.

Turning my machine off and on again *seems* to help, *usually*.

Please help -- this is taking enormous amounts of time and paper!

Thanks

David
 

Read other answers
RELEVANCY SCORE 57.6

I have an all-in-one hp v40 printer. If I try printing photos using the proper 8x10 photo papers will it give good pictures that I can put into a frame? The printing program I will be using is "PRINT WIZARD" a built in feature in XP.
 

A:Print paper

Read other 8 answers
RELEVANCY SCORE 57.6

I have had this problem but with a slight difference, I could print to Notepad and nothing else but this time, I can't print from any program at all, not Word, not Notepad, not to PDF and not to my paper printer. I open "See what's printing" and the print jobs are just stuck there.

The last time it printed was at 9:38 PM yesterday. I have used system restore to backdate to 4 days ago and still can't print. I have stopped and started the print spooler, no help.

I'm lost.
 

A:Cannot print at all, not to PDF, not to paper

Is there any errors to the jobs?
 

Read other 1 answers
RELEVANCY SCORE 56.8

my printer is on pause mode and will not resume so I am unable to print

Read other answers
RELEVANCY SCORE 56.4

hi my hp laptop/notebook is saying the printer is jammed and wont print.the printer isnt jammed and the hp solution centersays the printer is ready . how do i stop this  Please help

Read other answers
RELEVANCY SCORE 56.4

I'm using a Toshiba Satellite laptop running Windows Vista. I have also been successfully using an HP Photosmart B209a "all in one" printer with a wireless connection. I began getting low ink messages, so installed new HP cartridges. When I try to align the new cartridges, I get a message that says the alignment failed, but I can still use the printer. However, when I try to print any document I have generated on my computer, the printer picks up the paper and goes through the machinations of printing, but when it spits out the paper, it is blank. When I print a test page, it works. When I print a page from a website, it works. It will copy a document. It simply won't print anything I generate using my word processor or spreadsheet (I use Microsoft Works).

HP's Monitor program says that the computer is ready.

I have used HP Solutions Center, but nothing it suggests has made any difference. I have checked my wireless connection and it is working, obviously, or the printer wouldn't be getting the message to print, as it surely is, since it starts, picks up the paper and goes through the whole process of printing. However, nothing comes out except a blank piece of paper.

Hope you can help.
 

A:Solved: Paper Goes Through Printer, but won't print.

Read other 16 answers
RELEVANCY SCORE 56.4

I'm taking photo's with a resolution of 220.
Reducing these to 72 for internet use, all working great.
If I want to have some of the photo's printed, will the 220 resolution give me a better quality print
or does it matter ?
Thanks
 

A:Print images on photo paper ?

Read other 8 answers
RELEVANCY SCORE 56.4

Hello,
I'm looking for a program that reduces how much paper is used when printing. I remember reading a thread where someone had written how many pages they had saved by using a particular program. However in my numerous searches I can't find the name of the program. I'm planning on doing alot of printing of lecture notes, however I'd love to not use lots and lots of paper. Any ideas on the programs name?
Thanks.
 

A:Print 'Paper Saving' Manager

Read other 7 answers
RELEVANCY SCORE 56.4

Am using a new 2000XP and received a picture in e-mail that is to big to print out on one sheet of paper. Will you tell me how to print it please.
 

A:Please tell me how to print out a picture that is to big for one sheet of paper -

Read other 9 answers
RELEVANCY SCORE 56.4

Hello:I am running Windows 2000 pro, with all service packs installed, including the final service pack that was issued in place of the service pack 5 that was canceled.The problem is fairly easy to describe:- I open WordPad, type a single space, then use the File pull-down menu to print a blank piece of paper.- The Print dialog box, pages entry has 1-65535 in it. If I go ahead and click on the Print button, I would need more than 13 cases of paper for the job to complete!This is a new phenomenon, as I have used this technique for quite some time to ensure proper connection to the printer and that other programs will be likely to print correctly and never have had the printer spit-out more than one sheet of paper.I can highlight the "1-65535" value and delete it, which will allow me to print the one blank page I want, but I shouldn't have to do that extra step (and the print dialogue box should not show anything in the "pages" box). I would like to know if perhaps something in the configuration files for WordPad causes this to happen and, if so, what it is, where it is, and how can I change it to get things back to normal.I did run Avast!, Spybot, SuperAntoSpyware, and the free Trend Micro scan to see if there might be some malware that contributes to the problem. Nothing was found.Since I run Win2K on of my other computers, I thought a simple approach would be to locate WordPad and its associated files on one of the other computers and simply ... Read more

Read other answers
RELEVANCY SCORE 55.6

toshiba e studio 282.
Why is it printing like that when I aline the paper with in the perimeter guide?
 

A:printer printing slated print on paper.

The word is slanted not slated. Sorry.
 

Read other 1 answers
RELEVANCY SCORE 55.6

Every time I try to print anything, my WF-2530 feeds a sheet through and reports paper out. The unit has seen little use and has never had a paper jam. I have carefully loaded only a few sheets of regular 20 lb paper and it does it every time. I have done the same with some Kodak photo paper for inkjet and gotten the same results. It simply does not detect that there is paper loaded.

I have tried resetting the unit, powering off then on, disconnecting and reconnecting the power cord. Nothing causes it to recognize that paper is loaded after it feeds the first sheet through. Press the 'OK' button and it will feed another sheet and continue to report 'paper out'.

I don't want to replace such a lightly used printer. If I can correct whatever is wrong with the paper sensor it would be a blessing. Help!
 

Read other answers
RELEVANCY SCORE 55.6

I preparing a display that requires printing very light ink on black paper. I have tried white, although a lack of ink makes sense on white paper, yellow and light orange. Looking very closely at the finished sheet I do not see any evidence of any ink being deposited. However, I can see evidence of black being deposited. The printer is a HP PhotoSmart Premium C310a. Incidentally, my Hp series D2600 acts the same way. Both printers print all colors when white paper is used. Any ideas?

A:Trying to print light fonts on black paper

To get even a light gray text you would have to use black ink on white paper. The "color" white is actually the complete absence of any color at all, so most consumer printers have to turn of all the color cartridges and rely on the paper to produce the "white".

You could buy a printer that uses actual white ink, but I bet they're expensive!

http://www.thenerds.net/EPSON.Epson_...e.T596C00.html
But at $276.99 for just the cartridge you might want to consider a white crayon...:-)

Read other 2 answers
RELEVANCY SCORE 55.6

I have a HP photo smart B110 series printer, and recently when I send a print job to it that has multiple pages and is quite detailed it always gives a paper jam error.
It occurs when printing PDF files, long word documents... basically anything that has a lot of info. As it is going slowly through once the first page is about 2/3rd printed the Jam error occurs. The next sheet has not moved at all so clearly isn't causing an issue.
If I set the quality to Fast Draft it prints with no problem, but obviously it isn't as good a copy.

Can any one shed any light on this issue please?

Thanks

Ben Thomson
 

A:Paper Jam issue with slow print jobs

Sounds like a hardware issue. Paper moving fast through the printer works fine. Paper moving slow fails.
 

Read other 1 answers
RELEVANCY SCORE 55.2

Is THERE ANY WAY OF DEFAULTING THE PRINT SERVER ON A WIN2K3 SERVER TO ALWAYS BE A4 PAPER SIZE. EVERY TIME WE CREATE A NEW PRINTER IT ALWAYS DEFAULTS TO LETTER PAPER SIZE AND WE HAVE TO REMEMBER TO CHANGE IT
 

Read other answers
RELEVANCY SCORE 55.2

I recently had a clean Win7 install done and my computer is much more efficient and speedy. However, today is the first time I've tried to print photos from My Pictures but I'm not having any luck though I can print text from documents. In addition the print dialogue box no longer gives me the template options, only full page. I've inserted new ink and searched everywhere on my PC but can't find a reason for this. I even tried printing pix onto plain paper but that comes out empty too. Can anybody help please? Until the new install I could print photos relatively easily.
Thanks in advance.
Tech Support Guy System Info Utility version 1.0.0.4
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: Intel(R) Core(TM)2 Quad CPU Q8300 @ 2.50GHz, Intel64 Family 6 Model 23 Stepping 10
Processor Count: 4
RAM: 3839 Mb
Graphics Card: NVIDIA GeForce 7100 / NVIDIA nForce 630i (Microsoft Corporation - WDDM), 256 Mb
Hard Drives: C: 111 GB (70 GB Free);
Motherboard: Packard Bell, imedia S3720
Antivirus: Bitdefender Antivirus Free Edition, Enabled and Updated
 

A:Hp Photosmart spewing blank paper when trying to print photo

What's the exact model number and exact product number of that HP Photosmart printer?

Have you installed the full-feature software driver package for that printer for Windows 7 64-bit?

--------------------------------------------------------------
 

Read other 1 answers
RELEVANCY SCORE 55.2

My company has several HP1300 LaserJet printers on desks that have developed an extremely frustrating issue. They are printing multiple pages on one sheet of paper. When printing only one page, no problem. But, when printing a multiple page document all pages are printed on top of one another on one sheet of paper. This started all of a sudden, and all of my 1300's are doing it - no other model. I have tried uninstalling the printer, deleting the driver and reinstalling - didn't help. I have tried using drivers for similar printers - didn't help. HP "customer support" is next to impossible to get on the phone. Anyone have any thoughts?
 

Read other answers
RELEVANCY SCORE 55.2

Hello all,

I recently bought a new computer and had it custom made to what i wanted it to be. I have a few questions about it though.

First off i will tell you what it is.
It is made up of the following hardware:

Mobo - Asus m3a76-cm pci-ex 1gb lan
Processor - AMD Athlon II x2 215 2.7ghz dual core 45nm, AM3 2mb Cache
Cooling - Spire Kestrel-King II AMD 64 fan
Ram - 3gb (3x1gb) ddr2 pc5300 667 dual channel
Graphics - GeForce 9400GT 1gb PCI express 16x dual head, tv out
optical drive - 22x Lite On DVD +-RW dual layer
Case - Cooler Master Elite 310 with side window and front usb
power supply - Logysis 480w ATX power supply

OK so here are my questions:

1. What are your overall thoughts of this system?
2. Can i overclock it and if so how much while still being stable?
3. With the fan i got do you know how cold it will be?
4. What the heck is dual layer?
5. Will the 480w power supply be enough for all this?
6. In the picture i chose this case because it looked good, was cheap and it had lights. Will it come with the lights or do i have to add them?

I ordered it online and it has not yet come
Thanks for the help, and all suggestions,comments, and questions are welcome.
 

A:My custom PC

The power supply will handle that system, although i don't know anything about Logysis PSU's. You should be able to get 700Mhz to 1Ghz OC from that CPU with ample cooling. Dual layer is a technology that lets you burn data to two layers of the DVD that sit atop one another. Different light wavelengths reach the upper layer (and 'burn') data, than do the lower data layer...(thats the very short version)
as far as the "what do you think?" question, i guess that depends on what you paid, and what its intended use is. It is not going to be much of a gaming machine with that GPU. but other than that it really goes back to what you are expecting it to do.
 

Read other 15 answers
RELEVANCY SCORE 55.2

Hey there! WittyWidi here.
Anyway, I'm building a custom machine. I want to get Windows 8.1 for it. Windows - Microsoft Store U.S. Here, I can probably see the right thing. However, $119 is a big amount, and it says




Important: Windows 8.1 full version is for Windows 7 users only. Currently running Windows Vista or XP? First upgrade to Windows 8. Upon installation you can update to 8.1 for free.



, which makes it sound like you NEED win 7 to get 8.1 for this price. Can I use this with my custom box with no prebuilt OS?
Thanks,
WittyWidi

A:Win 8.1 on Custom Box?

Clear as mud huh? The way I read it is, if you are running XP or Vista and want to do an "upgrade install", you'll have to upgrade to 8.0 first. Then do the free upgrade to 8.1 though the store. Windows 8.1 will not let you do an upgrade install from XP or Vista, only 7 or 8.0. It states >Windows 8 upgrade is for Windows Vista or XP users. Upon installation you can install the free 8.1 update available through the Windows Store.

If you are buying the full Retail version and not doing an upgrade install you can ignore all that. A full Retail version will let you clean install on your new hardware. Assuming the hardware is compatible that is.

Read other 5 answers
RELEVANCY SCORE 55.2

Alright, I am thinking about making my own PC. I wanted to know what are good brands out there right now or models. If someone could list a good list of good models out there for everything you need for a custom computer. I want to build a computer for programming, web designing and all that cool stuff. Just list a good processor, mother board etc all the stuff you need to build a comp and a good model for that particular part. Thanks
 

A:Custom PC!

Hello and welcome. How much money do you want to spend? {
 

Read other 3 answers
RELEVANCY SCORE 55.2

Ok so here's the sich,

about a year ago I constructed my own computer with the parts listed below,
It ran fine just a little GPU issue but after about a month the computer broke down right after I installed a new fan. at first I thought it was a Motherboard issue but after getting the motherbord back it still will not pass POST.

Any help would be appreciated...

The build is as follows:
MSI 970A-G46 AM3+ AMD 970 + SB950 ATX AMD Motherboard
http://www.newegg.com/Product/Product.aspx?Item=N82E16813130637

ECS NGTX560-1GPI-F1 GeForce GTX 560 (Fermi) 1GB 256-bit GDDR5 PCI Express 2.0 x16 HDCP Ready SLI Support Video Card
http://www.newegg.com/Product/Product.aspx?Item=N82E16813130637

AMD FX-6200 Zambezi 3.8GHz (4.1GHz Turbo) Socket AM3+ 125W 6-Core Desktop Processor
http://www.newegg.com/Product/Product.aspx?Item=N82E16819106010

APEVIA ATX-CB700W 700W ATX12V / EPS12V SLI Ready CrossFire Ready Power Supply - OEM
http://www.newegg.com/Product/Product.aspx?Item=N82E16817148046
 

A:Need a little help with a custom rig

Read other 7 answers
RELEVANCY SCORE 55.2

I just built my first computer and I dont know a whole lot but I know enough. I dont know anything about overclocking or how to get the full potential out of what I have. I have a AMD Athlon 64 x2 4600 and 2GB of Corseair dual channel 6400 ddr2. I think this thing is slow as mollasses. Anyone interested in helping me out?
 

A:New to custom pc's

1. Why do you feel it's slow? That system should be fairly fast if you don't have a million things trying to run in the background.

2. Overclocking is overrated. All you will get out of it is maybe a few percent faster and usualy a lot more heat and instability. I forgo it, and I am a hardcore gamer who can always use more performance. Performance at the cost of reliability is stupid.
 

Read other 10 answers
RELEVANCY SCORE 55.2

Anyone who makes custom PCs or made their own PC list the parts you used for the PC.(The companies and models of each part) Everything from the Motherboard to the Mouse and keyboard
 

A:Custom PCs

Hi
I finished my new rig about 2 months ago heres the specs
P4c 3.0 GHz
MSI 865PE NEo 2 board
1GB Kingmax pc3500 RAM
1 Western Digital Raptor HD (37 GB 10k rpm)
1 Samsung 120 GB hard drive (8 mb cache 7200rpm)
Coolermaster wave master case
9600 ATI graphics card fro Sapphire
MX500 logitech mouse
cooler master q keyboard (for the look is alui like case)
Phillips 17" TFT screen with DVI input
Creative 2.1 speaker
Lite on DVD/CDRW combo drive
Lite on 8x DVD +-RW

Thats about everything but I do have a few upgrades in mnd over the next few months, firstly to add a second WD raptor in RAID 0 for the main C: drive possible upgrade of the mother board to an ABIT IC-7 max 3 as I am having a bit of a problem with the RAM on this mother board (and cause it should make the computer faster). The graphics card is low spec cause I don't do much pc gaming and what I do do doesn't need high graphic card plus the new breed of graphics cards are almost here making the older models like the 9800pro much cheaper.
 

Read other 3 answers
RELEVANCY SCORE 55.2

Ok I don't know if it's the os or the hardware but my friends computer is having problems.

Hardware...
MB - Asus m4a77td
RAM - 1Gx2 mushkin 996602
HDD - 640GB WD
CPU - AMD Phenom II X3 720
PSU - 550w Rosewill
Video - MSI N250GTS TWINFROZR

So sometimes when the computer is left on and the monitor goes into power save mode, the computer freezes up and won't come back. And the other problem is when we try to play sims 3 the computer just randomly shuts off. I was looking at other forums and some people said that sometimes hardware is undervolted cause the MB just guesses unless you enter it manually.
Here is some screenshots from cpuid(i guess i can only post two at a time so i'll post a couple more times to get all the information on there). Please help

A:win 7 32 bit custom

More cpuid screenshots

Read other 4 answers