Over 1 million tech questions and answers.

Can't read WHEA in my crash dump files. Help!

Q: Can't read WHEA in my crash dump files. Help!

I've been having several regular BSOD(s) for the past two weeks. I suspect that my core is failing.

I reapplied some thermal paste and the temp is 20 degrees lower than it was running before I changed it. The voltage running through it seems to be normal.

I keep trying to pinpoint the exact errors, but my windbg keeps telling me I don't have the right symbols (even though they're configured to Microsoft's symbol server) to read WEA_ERROR_RECRODs.

Can someone with properly configured symbols paste the WEA error logs (!errrec)? That would really help me since I'm pretty much at a dead end since I can't get windbg to cooperate. Or is anyone able to help me pinpoint the exact trouble?'

I've already spent many hours:
memtest86 says my 4 sticks of memory are fine (ran from bootable CD)
western digital data scan says my hard drive is fine (ran from bootable CD)

Specs:
Vista 32-bit SP2
(Dell Inspiron 531)
AMD x64 5600

Periphs:
GTX 295
USB Mouse
USB Keyboard

Power Supply is Turbo Cool 860 ESA and is about 4 years old.

WinDBG not being cooperative:


Code:
Loading Dump File [C:\Users\Emily\Desktop\Kyle's Dumps\Mini082112-12.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: c:\Windows\Symbols
Executable search path is: C:\Windows\System32
Windows Server 2008/Windows Vista Kernel Version 6002 (Service Pack 2) MP (2 procs) Free x86 compatible
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 6002.18607.x86fre.vistasp2_gdr.120402-0336
Machine Name:
Kernel base = 0xe3e4c000 PsLoadedModuleList = 0xe3f63c70
Debug session time: Tue Aug 21 11:22:12.874 2012 (UTC - 4:00)
System Uptime: 0 days 0:02:07.498
Loading Kernel Symbols
...............................................................
.......................
Loading User Symbols
Loading unloaded module list
......
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 124, {0, c4850028, b6000000, 181}

*************************************************************************
*** ***
*** ***
*** Either you specified an unqualified symbol, or your debugger ***
*** doesn't have full symbol information. Unqualified symbol ***
*** resolution is turned off by default. Please either specify a ***
*** fully qualified symbol module!symbolname, or enable resolution ***
*** of unqualified symbols by typing ".symopt- 100". Note that ***
*** enabling unqualified symbol resolution with network symbol ***
*** server shares in the symbol path may cause the debugger to ***
*** appear to hang for long periods of time when an incorrect ***
*** symbol name is typed or the network symbol server is down. ***
*** ***
*** For some commands to work properly, your symbol path ***
*** must point to .pdb files that have full type information. ***
*** ***
*** Certain .pdb files (such as the public OS symbols) do not ***
*** contain the required information. Contact the group that ***
*** provided you with these symbols if you need this command to ***
*** work. ***
*** ***
*** Type referenced: pshed!_WHEA_ERROR_RECORD_HEADER ***
*** ***
*************************************************************************
*************************************************************************
*** ***
*** ***
*** Either you specified an unqualified symbol, or your debugger ***
*** doesn't have full symbol information. Unqualified symbol ***
*** resolution is turned off by default. Please either specify a ***
*** fully qualified symbol module!symbolname, or enable resolution ***
*** of unqualified symbols by typing ".symopt- 100". Note that ***
*** enabling unqualified symbol resolution with network symbol ***
*** server shares in the symbol path may cause the debugger to ***
*** appear to hang for long periods of time when an incorrect ***
*** symbol name is typed or the network symbol server is down. ***
*** ***
*** For some commands to work properly, your symbol path ***
*** must point to .pdb files that have full type information. ***
*** ***
*** Certain .pdb files (such as the public OS symbols) do not ***
*** contain the required information. Contact the group that ***
*** provided you with these symbols if you need this command to ***
*** work. ***
*** ***
*** Type referenced: pshed!_WHEA_ERROR_RECORD_SECTION_DESCRIPTOR ***
*** ***
*************************************************************************
*************************************************************************
*** ***
*** ***
*** Either you specified an unqualified symbol, or your debugger ***
*** doesn't have full symbol information. Unqualified symbol ***
*** resolution is turned off by default. Please either specify a ***
*** fully qualified symbol module!symbolname, or enable resolution ***
*** of unqualified symbols by typing ".symopt- 100". Note that ***
*** enabling unqualified symbol resolution with network symbol ***
*** server shares in the symbol path may cause the debugger to ***
*** appear to hang for long periods of time when an incorrect ***
*** symbol name is typed or the network symbol server is down. ***
*** ***
*** For some commands to work properly, your symbol path ***
*** must point to .pdb files that have full type information. ***
*** ***
*** Certain .pdb files (such as the public OS symbols) do not ***
*** contain the required information. Contact the group that ***
*** provided you with these symbols if you need this command to ***
*** work. ***
*** ***
*** Type referenced: pshed!_WHEA_ERROR_RECORD_HEADER ***
*** ***
*************************************************************************
*************************************************************************
*** ***
*** ***
*** Either you specified an unqualified symbol, or your debugger ***
*** doesn't have full symbol information. Unqualified symbol ***
*** resolution is turned off by default. Please either specify a ***
*** fully qualified symbol module!symbolname, or enable resolution ***
*** of unqualified symbols by typing ".symopt- 100". Note that ***
*** enabling unqualified symbol resolution with network symbol ***
*** server shares in the symbol path may cause the debugger to ***
*** appear to hang for long periods of time when an incorrect ***
*** symbol name is typed or the network symbol server is down. ***
*** ***
*** For some commands to work properly, your symbol path ***
*** must point to .pdb files that have full type information. ***
*** ***
*** Certain .pdb files (such as the public OS symbols) do not ***
*** contain the required information. Contact the group that ***
*** provided you with these symbols if you need this command to ***
*** work. ***
*** ***
*** Type referenced: pshed!_WHEA_ERROR_RECORD_HEADER ***
*** ***
*************************************************************************
*************************************************************************
*** ***
*** ***
*** Either you specified an unqualified symbol, or your debugger ***
*** doesn't have full symbol information. Unqualified symbol ***
*** resolution is turned off by default. Please either specify a ***
*** fully qualified symbol module!symbolname, or enable resolution ***
*** of unqualified symbols by typing ".symopt- 100". Note that ***
*** enabling unqualified symbol resolution with network symbol ***
*** server shares in the symbol path may cause the debugger to ***
*** appear to hang for long periods of time when an incorrect ***
*** symbol name is typed or the network symbol server is down. ***
*** ***
*** For some commands to work properly, your symbol path ***
*** must point to .pdb files that have full type information. ***
*** ***
*** Certain .pdb files (such as the public OS symbols) do not ***
*** contain the required information. Contact the group that ***
*** provided you with these symbols if you need this command to ***
*** work. ***
*** ***
*** Type referenced: pshed!_WHEA_ERROR_RECORD_HEADER ***
*** ***
*************************************************************************
Probably caused by : AuthenticAMD

Followup: MachineOwner
---------

0: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

WHEA_UNCORRECTABLE_ERROR (124)
A fatal hardware error has occurred. Parameter 1 identifies the type of error
source that reported the error. Parameter 2 holds the address of the
WHEA_ERROR_RECORD structure that describes the error conditon.
Arguments:
Arg1: 00000000, Machine Check Exception
Arg2: c4850028, Address of the WHEA_ERROR_RECORD structure.
Arg3: b6000000, High order 32-bits of the MCi_STATUS value.
Arg4: 00000181, Low order 32-bits of the MCi_STATUS value.

Debugging Details:
------------------

*************************************************************************
*** ***
*** ***
*** Either you specified an unqualified symbol, or your debugger ***
*** doesn't have full symbol information. Unqualified symbol ***
*** resolution is turned off by default. Please either specify a ***
*** fully qualified symbol module!symbolname, or enable resolution ***
*** of unqualified symbols by typing ".symopt- 100". Note that ***
*** enabling unqualified symbol resolution with network symbol ***
*** server shares in the symbol path may cause the debugger to ***
*** appear to hang for long periods of time when an incorrect ***
*** symbol name is typed or the network symbol server is down. ***
*** ***
*** For some commands to work properly, your symbol path ***
*** must point to .pdb files that have full type information. ***
*** ***
*** Certain .pdb files (such as the public OS symbols) do not ***
*** contain the required information. Contact the group that ***
*** provided you with these symbols if you need this command to ***
*** work. ***
*** ***
*** Type referenced: pshed!_WHEA_ERROR_RECORD_HEADER ***
*** ***
*************************************************************************
*************************************************************************
*** ***
*** ***
*** Either you specified an unqualified symbol, or your debugger ***
*** doesn't have full symbol information. Unqualified symbol ***
*** resolution is turned off by default. Please either specify a ***
*** fully qualified symbol module!symbolname, or enable resolution ***
*** of unqualified symbols by typing ".symopt- 100". Note that ***
*** enabling unqualified symbol resolution with network symbol ***
*** server shares in the symbol path may cause the debugger to ***
*** appear to hang for long periods of time when an incorrect ***
*** symbol name is typed or the network symbol server is down. ***
*** ***
*** For some commands to work properly, your symbol path ***
*** must point to .pdb files that have full type information. ***
*** ***
*** Certain .pdb files (such as the public OS symbols) do not ***
*** contain the required information. Contact the group that ***
*** provided you with these symbols if you need this command to ***
*** work. ***
*** ***
*** Type referenced: pshed!_WHEA_ERROR_RECORD_SECTION_DESCRIPTOR ***
*** ***
*************************************************************************
*************************************************************************
*** ***
*** ***
*** Either you specified an unqualified symbol, or your debugger ***
*** doesn't have full symbol information. Unqualified symbol ***
*** resolution is turned off by default. Please either specify a ***
*** fully qualified symbol module!symbolname, or enable resolution ***
*** of unqualified symbols by typing ".symopt- 100". Note that ***
*** enabling unqualified symbol resolution with network symbol ***
*** server shares in the symbol path may cause the debugger to ***
*** appear to hang for long periods of time when an incorrect ***
*** symbol name is typed or the network symbol server is down. ***
*** ***
*** For some commands to work properly, your symbol path ***
*** must point to .pdb files that have full type information. ***
*** ***
*** Certain .pdb files (such as the public OS symbols) do not ***
*** contain the required information. Contact the group that ***
*** provided you with these symbols if you need this command to ***
*** work. ***
*** ***
*** Type referenced: pshed!_WHEA_ERROR_RECORD_HEADER ***
*** ***
*************************************************************************
*************************************************************************
*** ***
*** ***
*** Either you specified an unqualified symbol, or your debugger ***
*** doesn't have full symbol information. Unqualified symbol ***
*** resolution is turned off by default. Please either specify a ***
*** fully qualified symbol module!symbolname, or enable resolution ***
*** of unqualified symbols by typing ".symopt- 100". Note that ***
*** enabling unqualified symbol resolution with network symbol ***
*** server shares in the symbol path may cause the debugger to ***
*** appear to hang for long periods of time when an incorrect ***
*** symbol name is typed or the network symbol server is down. ***
*** ***
*** For some commands to work properly, your symbol path ***
*** must point to .pdb files that have full type information. ***
*** ***
*** Certain .pdb files (such as the public OS symbols) do not ***
*** contain the required information. Contact the group that ***
*** provided you with these symbols if you need this command to ***
*** work. ***
*** ***
*** Type referenced: pshed!_WHEA_ERROR_RECORD_HEADER ***
*** ***
*************************************************************************
*************************************************************************
*** ***
*** ***
*** Either you specified an unqualified symbol, or your debugger ***
*** doesn't have full symbol information. Unqualified symbol ***
*** resolution is turned off by default. Please either specify a ***
*** fully qualified symbol module!symbolname, or enable resolution ***
*** of unqualified symbols by typing ".symopt- 100". Note that ***
*** enabling unqualified symbol resolution with network symbol ***
*** server shares in the symbol path may cause the debugger to ***
*** appear to hang for long periods of time when an incorrect ***
*** symbol name is typed or the network symbol server is down. ***
*** ***
*** For some commands to work properly, your symbol path ***
*** must point to .pdb files that have full type information. ***
*** ***
*** Certain .pdb files (such as the public OS symbols) do not ***
*** contain the required information. Contact the group that ***
*** provided you with these symbols if you need this command to ***
*** work. ***
*** ***
*** Type referenced: pshed!_WHEA_ERROR_RECORD_HEADER ***
*** ***
*************************************************************************

BUGCHECK_STR: 0x124_AuthenticAMD

CUSTOMER_CRASH_COUNT: 12

DEFAULT_BUCKET_ID: COMMON_SYSTEM_FAULT

PROCESS_NAME: System

CURRENT_IRQL: 2

STACK_TEXT:
e3f3ef38 e3e1f9dd 00000124 00000000 c4850028 nt!KeBugCheckEx+0x1e
e3f3ef8c e3f0d4e0 c4850028 c32b9008 c32b9008 hal!HalBugCheckSystem+0xe1
e3f3efb8 e3e1f8f1 c32b9008 e3e32fb4 e3f3eff4 nt!WheaReportHwError+0x1d0
e3f3efc8 e3e1ffed 00000003 c32b9008 00000000 hal!HalpReportMachineCheck+0x31
e3f3eff4 e3e1b99f e0164000 00000000 00000000 hal!HalpMcaExceptionHandler+0x115
e3f3eff4 00000000 e0164000 00000000 00000000 hal!HalpMcaExceptionHandlerWrapper+0x77


STACK_COMMAND: kb

FOLLOWUP_NAME: MachineOwner

MODULE_NAME: AuthenticAMD

IMAGE_NAME: AuthenticAMD

DEBUG_FLR_IMAGE_TIMESTAMP: 0

FAILURE_BUCKET_ID: 0x124_AuthenticAMD__UNKNOWN

BUCKET_ID: 0x124_AuthenticAMD__UNKNOWN

Followup: MachineOwner
---------
Minidump files attached in a .zip:

RELEVANCY SCORE 200
Preferred Solution: Can't read WHEA in my crash dump files. Help!

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Can't read WHEA in my crash dump files. Help!

Still looking for anyone to take a look at the minidump files.

Read other 2 answers
RELEVANCY SCORE 87.2

Please help, been having a problem for about a month now, thanks..

I cant run that Windows_NT6_BSOD_v3.03_jcgriff2_.exe file I downloaded from this site, so i hope the crash dump files will do. Thanks..

A:Crash dump (help me read the files)

   Information
Bugcheck 0xA0 - Usual Cause : Drivers, Sleep problems or Hardware (PSU Mainly)

Probably caused by : ntkrpamp.exe ( nt!PopAllocateIrp+a0 )

If you have any Overclocked Hardware then please return back to Default Clock speed

Run a full scan with your AV

Could you also tell me the Make/model of your PSU and If you added any Hardware then please remove.

For Reference:

Code:
Microsoft (R) Windows Debugger Version 6.12.0002.633 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\Josh\AppData\Local\Temp\Temp1_crash dump files.zip\Mini060111-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*C:\Symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows Server 2008/Windows Vista Kernel Version 6001 (Service Pack 1) MP (4 procs) Free x86 compatible
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 6001.18063.x86fre.vistasp1_gdr.080425-1930
Machine Name:
Kernel base = 0x8244c000 PsLoadedModuleList = 0x82563c70
Debug session time: Wed Jun 1 01:40:06.236 2011 (UTC + 1:00)
System Uptime: 0 days 2:35:14.266
Loading Kernel Symbols
...............................................................
................................................................
............
Loading User Symbols
Loading unloaded module list
...
*******************************************************************************
* ... Read more

Read other 19 answers
RELEVANCY SCORE 66.4

Hi guys,im getting alot of BSOD everyday and i want someone to read the dump files.i have attached in rar the latest dmp files.

I would really appreciate if someone helps me. Cheers

A:Dump files to read for me

Dump Files is (.zip) Format...

Read other 9 answers
RELEVANCY SCORE 66.4

Hey everyone so I've been having some issues lately with my laptop bluescreening randomly. I'm running Windows 7 Ultimate x64 and can't seem to figure out what exactly is the issue with my computer. I've run chkdsk and have found no bad sectors as well as ran memtest 86 for 5 passes on each stick and came back ok. Also ran sfc /scannow and it came back with no errors. When I do get a blue screen the error it says is something like IRQL_DRIVER or something along those lines...so maybe it's possibly a driver issue? All my drivers have been updated.

So I attached 4 dump files and was wondering if someone could read them for me and possibly point me in the right direction?

Thanks!

A:Can someone read my Dump files?

Hi,

Remove Zone Alarm.

Zone Alarm Removal tool -> http://download.zonealarm.com/bin/fr...cpes_clean.exe (run in Safe Mode without Networking)

Also - turn driver verifier on

Using Driver Verifier to identify issues with Drivers

Regards,
Reventon
BUGCHECK SUMMARY

Code:

Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Debug session time: Fri Oct 1 08:44:23.043 2010 (GMT+13)
System Uptime: 0 days 2:07:52.056
BugCheck D1, {ffffffff00000000, 2, 8, ffffffff00000000}
Probably caused by : ntkrnlmp.exe ( nt!KiPageFault+260 )
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0xD1
PROCESS_NAME: System
Bugcheck code 000000D1
Arguments ffffffff`00000000 00000000`00000002 00000000`00000008 ffffffff`00000000
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Debug session time: Fri Oct 1 06:35:50.015 2010 (GMT+13)
System Uptime: 0 days 0:15:46.028
BugCheck D1, {ffffffff00000000, 2, 8, ffffffff00000000}
Probably caused by : ntkrnlmp.exe ( nt!KiPageFault+260 )
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0xD1
PROCESS_NAME: System
Bugcheck code 000000D1
Arguments ffffffff`00000000 00000000`00000002 00000000`00000008 ffffffff`00000000
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Debug session time: Fri Oct 1 05:22:46.291 2010 (GMT+13)
System Uptime: 0 days 0:03:47.305
BugCheck ... Read more

Read other 8 answers
RELEVANCY SCORE 66.4

My computer has been experiencing BSOD lately through out this month. I have attached some files with the dumps. Please help me figure out what was the cause of the BSODs. Thank you very much in advance.

A:Please help me read dump files

  
Quote: Originally Posted by monsteranh


My computer has been experiencing BSOD lately through out this month. I have attached some files with the dumps. Please help me figure out what was the cause of the BSODs. Thank you very much in advance.


Your video driver, re-install using this method.

When upgrading your graphic driver you MUST remove all traces of the current driver. In order to do that we recommend using Guru3D - Driver Sweeper
Or Phyxion.net - Driver Sweeper

When it is removed then download and install the fresh copy.

Code:

Microsoft (R) Windows Debugger Version 6.11.0001.404 X86
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\K\Desktop\Seven Forums\053111-26754-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*C:\Symbols*http://msdl.microsoft.com/download/symbols;srv*e:\symbols
*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7601.17592.amd64fre.win7sp1_gdr.110408-1631
Machine Name:
Kernel base = 0xfffff800`02c1d000 PsLoadedModuleList = 0xfffff800`02e62650
Debug session time: Tue May 31 22:09:52.090 2011 (GMT-4)
System Uptime: 0 days 21:16:40.932
Loading Kernel Symbols
...............................................................
..................................... Read more

Read other 2 answers
RELEVANCY SCORE 66.4

All my dump files as well as others I've looked at in this forum, looks like hieroglyphics when I open them in Notepad, "PAGEDU64 `B x, p& P3$ d? ? ?? H X?? ??? ? Y ?? ? @? < <......"

What I'm doing wrong?
 

A:How to read dump files?

Download and use Bluescreenview...
 

Read other 2 answers
RELEVANCY SCORE 66.4

My pc started getting bsod and i have no idea why. Thanks in advance.

A:Can anyone read my dump files?

so i guess i should try to fix it myself? oh well.

Read other 7 answers
RELEVANCY SCORE 65.6

Hello!

I've done a forum search before opening a new topic, and the solutions I found in other topics are for reading BSOD minidumps, not application dump files, so for example BlueScreenView won't do me any good.

I have a 3rd party application that crashes frequently. The last time I created a dump file. After searching google for the better part of an hour on how to read dump files of applications specifically, I only came up with using dumpchk.exe for a solution, but the dump file is so large, I can not read the entire dump in the command line.

Is there a 3rd party application I can read entire dump files with?

Thanks in advance!

A:How do I read _application_ dump files?

The short version is you don't. Dump files are really only useful if you have access to the source code of the program they're for, so even if you could read them, it wouldn't help you much. Those dump files are intended for Microsoft's developers to be able to analyze what was going on at the time and determine if it had anything to do with Windows (or some other MS program). They're not intended for the average person, even the average developer.

Read other 7 answers
RELEVANCY SCORE 65.6

Hello everyone,

I am running Windows 7 Utimate 64-bit and I have gotten many random BSOD's while being use on internet . I have opened the dump files. And all of them say that probable cause is: ntoskrnl.exe ( nt+71f00 ).

Attachment 53661

I have attached a .zip file with these dump files too.
I've passed the test of memory, no erreurs was dectected.

Any information very much appreciated.

A:BSOD Please help me to read my dump files

Please help me, many thanks to you.

Read other 9 answers
RELEVANCY SCORE 65.6

Hello everyone,

I am running Windows 7 Pro 32bit on HP and I have gotten many random BSOD's while being use on internet (play game online). I have updated lastest Windows , VGA, all driver from HP but still have BSOD. I can not read dump files. please help me

Thanks

A:BSOD Please help me to read my dump files

Only ran the 9 memory dumps from July - the one's from May (a total of 21) suggest the same thing.
The 9 from July are STOP 0x1 errors - Although I did see one STOP 0x119 (video driver) error in the May dumps along with several other errors blaming your ATI video drivers.

If you haven't done anything to fix the May errors (there were no errors in June), then please do the following:
- download the Display Driver only (NOT the entire Catalyst Control Center) from Global Provider of Innovative Graphics, Processors and Media Solutions | AMD
- uninstall the current ATI stuff from your system
- install the Display Driver and monitor for further BSOD's.

Then, if the errors are still occurring, try running Driver Verifier according to these directions:





Quote:
Using Driver Verifier is an iffy proposition. Most times it'll crash and it'll tell you what the driver is. But sometimes it'll crash and won't tell you the driver. Other times it'll crash before you can log in to Windows. If you can't get to Safe Mode, then you'll have to resort to offline editing of the registry to disable Driver Verifier.

So, I'd suggest that you first backup your stuff and then make sure you've got access to another computer so you can contact us if problems arise. Then make a System Restore point (so you can restore the system using the Vista/Win7 Startup Repair feature).

Then, here's the procedure:
- Go to Start and type in "verifier" (without the quotes) and press Enter... Read more

Read other 1 answers
RELEVANCY SCORE 65.6

I've been running out of ideas now, and windbg somehow doesn't make me open the .dmp files, so I'm desperately asking for help :( I don't know what's wrong with my computer with the tons of BSOD.

Here's the link with attached dump file:
https://drive.google.com/open?id=1kuRVG6KLZhXM3NTuzguDFFDdiyhzDj5S

Read other answers
RELEVANCY SCORE 64.8

Hello,
I am wanting to start reading my own dump files on Microsoft OS's (primarily 7 and 8) so I can figure out problems for myself. I have Windows Debugger (WinDbg) installed and have read a few guides but they are vague. There is still a whole lot I need to
learn. Any guides you guys can recommend? Maybe something a whole lot easier and more detailed or another debugger.
So far I have read these guides from MS ->

How to read the small memory dump file that is created by Windows if a crash occurs - https://support.microsoft.com/en-us/kb/315263
Crash dump analysis using the Windows debuggers (WinDbg) - https://msdn.microsoft.com/en-us/library/windows/hardware/ff539316?f=255&MSPPError=-2147217396
I don't understand symbols and haven't been able to get them to work and it mentions I386 folder but that isn't present in Windows 7 and 8. I wasn't able to get any of my minidumps to load.
Thanks

Read other answers
RELEVANCY SCORE 64.8

i get these Page fault error alot

installed 3 months ago exactly after i biut this PC Win 7 x64

Please look into these Minidumps

A:BSOD in almost every action that i do Please read these dump files

Please remove any CD/DVD virtualization software, such as Daemon Tools/Alcohol 120%, as they use a driver called sptd.sys that is known to cause BSODs. Use add/remove programs to remove the software. After removing the software, use the sptd.sys uninstaller to remove sptd.sys from the system.

I prefer TotalMounter as my CD/DVD virtualization software as it allows me to burn images to a virtual CD/DVD if I just want an ISO file instead of a disc, and it is free.

Many use MagicISO - Convert BIN to ISO, Create, Edit, Burn, Extract ISO file, ISO/BIN converter/extractor/editor as well, which is also free.
Crashes are pointing to memory problems or driver conflicts.If you are overclocking any hardware, please stop.

Run the boot version of Memtest86+ paying close attention to Parts 2 and 3 of the tutorial. Also, in case Memtest86+ misses anything and comes up with no errors, run the extended version of the Windows Memory Diagnostics Tool for at least five passes. These you may want to run overnight since they take a long time to complete (run them an hour before bed each of the next two nights and check before going to sleep that they are still running).


   Warning
Before you proceed with the following, answer these two questions: Are you still under warranty? Does your warranty allow you to open up the machine to check hardware? If you are unsure of the answers to these questions, contact your system manufacturer. WARNING: The steps that follow can void your... Read more

Read other 1 answers
RELEVANCY SCORE 64.8

just got a new comp and final fantasy 14, put it in clicked english for my language and boom blue screen, didnt even get a chance to install and it happened 5 times after troubleshooting, i got system_service_exceeption for an error, finally found my dump files and zipped it with a system health report. please if anyone can decipher this THANKS IN ADVANCE

A:BSOD, someone read my dump files pleeease

Hi -

All 5 dumps had the same bugcheck -

0x3b (0xc0000005,,,) = system service threw an exception - 0xc0000005 = memory access violation. No probable cause named.

I found a loaded driver belonging to Symantec/ Norton -

Code:

SRTSPX64.SYS Wed Dec 02 00:58:24 2009 (4B160200)
Was there a trial offer on the new system for NIS, N360, other Norton product?

Run Norton Removal Tool - http://jcgriff2.com/NRT_N360_Removal.html

Is Webroot anti-virus only or an Internet Security app with a firewall? If firewall - remove Webroot; reboot upon comletion. Install MSE

Run the Driver Verifier -- http://jcgriff2.com/driver_verifier.htm


Windbg Logs
--> http://jcgriff2.net/BSOD_Logs/_99-db..._jcgriff2_.txt
--> http://jcgriff2.net/BSOD_Logs/_99-db...riff2_.txt.zip

Regards. . .

jcgriff2


`

BSOD BUGCHECK SUMMARY

Code:

Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Debug session time: Wed Sep 22 18:13:56.334 2010 (GMT-4)
System Uptime: 0 days 0:15:30.551
Probably caused by : ntkrnlmp.exe ( nt!PspInsertProcess+40 )
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0x3B
PROCESS_NAME: explorer.exe
Bugcheck code 0000003B
Arguments 00000000`c0000005 fffff800`033800c0 fffff880`056f6620 00000000`00000000
??????????????????????????????????????????????????????????????????????????????????????``
Built by: 7600.16617.amd64fre.win7_gdr.100618-1621
Debug session time: Wed Sep 22 17:43:09.841 2010 (GMT-4)
System Upt... Read more

Read other 4 answers
RELEVANCY SCORE 64.8

I have a workstation that has started crashing on the 17th.


It seems to go down 4-6 times per day. Previously it had only crashed 2 times in about 2 years. I asked the user if they had installed anything differently or if they had power issues and was told no.

I have never been great at trying to read dumps, so I am posting here to ask for help .
 

A:Random XP crashes. Can someone help me read the dump files?

First, the cause of your issue cited in all your minidump files is nvufmz.sys but the bad news is there is absolutely nothing on the internet concerning what appears to be a driver.

Second, it is preventing both your Symantec and your Broadcom wireless driver b57xp32.sysw from loading.

* I strongly suggest running your security software.
 

Read other 1 answers
RELEVANCY SCORE 64.8

Blue screen continually can you please read these files thank you
 

A:Solved: Can someone please read my dump check files

Read other 11 answers
RELEVANCY SCORE 64.8

When system crash, i get a bsod like this:

After it crash, windows saves the log in C as prefix crash.dmp Where can i get to that log file?

A:Where are dump files (.dmp) saved after crash ?

Hi,

If you want us to analyse the dump file for you, you need to make sure you are minidumping (not full etc) and the zip up and upload

C:\Windows\Minidump

folder. Busy now, but for general tips see my recent posts.

Richard

Read other answers
RELEVANCY SCORE 64.8

How do i view mozillas crash dump files???

A:Mozilla and crash dump files??

Type about:crashes in the URL box, which will give you a list of your crash reports; click on a link there, you'll get taken to the Mozilla Crash Reporter for that specific report.

Read other 5 answers
RELEVANCY SCORE 64

Hi,

I get random BSOD a lot since updating from 8 to 8.1. I don't know how to interpret these files, but I followed the instructions to make a zip with the diagnostics tool. I've attached this file, anyone who could help me interpret what is going wrong would be greatly appreciated.

Thanks

A:BSOD dont know how to read dump files but have attached

Hi pinksock.

Your BSODs are all stop 0x109 and they are not showing any possible cause.

Test your RAM modules for possible errors.
How to Test and Diagnose RAM Issues with Memtest86+
Run memtest for at least 8 passes, preferably overnight.

If it start showing errors/red lines, stop testing. A single error is enough to determine that something is going bad there.

Stress test the CPU.
Hardware - Stress Test With Prime95

If those tests are free from errors, enable Driver Verifier to monitor the drivers.
Driver Verifier - Enable and Disable
Run Driver Verifier for 24 hours or the occurrence of the next crash, whichever is earlier.



   Information
Why Driver Verifier:
It puts a stress on the drivers, ans so it makes the unstable drivers crash. Hopefully the driver that crashes is recorded in the memory dump.

How Can we know that DV is enabled:
It will make the system bit of slow, laggy.



   Warning
Before enabling DV, make it sure that you have earlier System restore points made in your computer. You can check it easily by using CCleaner looking at Tools > System Restore.

If there is no points, make a System Restore Point manually before enabling DV.



   Tip

If you fail to get on the Desktop because of DV, Boot into Advanced Boot Options > Safe mode. Disable DV there. Now boot normally again, and try following the instruction of enabling DV again.
If you cannot boot in Safe mode too, do a Syst... Read more

Read other 4 answers
RELEVANCY SCORE 64

I'm hoping someone can help me with my problem. I have Windows 7 Home 64-bit. Whenever I try to upload a document (like an email attachment) I get the BSOD. It occurs when my document box pops up so I can select the document I want to attach. The box doesn't fully load - and BSOD. This occurs in email and other websites in Firefox, Chrome and Open... but not in IE for whatever reason. IE is ok. When troubleshooting, I attempted to read the dump files - but BSOD again. I do have the info when my computer reboots and I'm hoping someone can help me:

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 1033

Additional information about the problem:
BCCode: 1e
BCP1: FFFFFFFFC0000005
BCP2: FFFFF88007BBCC40
BCP3: 0000000000000000
BCP4: 0000000000000000
OS Version: 6_1_7601
Service Pack: 1_0
Product: 768_1
 

A:BSOD when trying to Upload Documents or Read Dump Files

Hello BookNerdGirl and Welcome to TSG!

Please go to C:\Windows and copy the minidump folder to the desktop. Compress it and upload it here. Click Go Advanced and scroll down to Manage Attachments to do this.
 

Read other 2 answers
RELEVANCY SCORE 64

Hi, I was trying to figure out what caused the Stop error I last encountered. I tried searching for any clues on Windows XP's mini dump, but I can't seem to find it. All I see are drivers loaded at that time, but the actual file I'm searching for, the file that caused the crash as indicated on the Stop error, is not there. It's actually Speedbit's Video Accelerator file, sbbotdi.sys. I have to find that out the hard way - waiting for the PC to trigger the stop error again. I saw people here asking for the minidump and replying with the exact file that caused the error. Thanks a lot

A:[SOLVED] How to read WinXP's Mini dump files

hello

just a suggestion if you haven't tried it yet but go to the home site of the company and inquire of them of the file and any related problems that might cause this

you might get the info you are lookin for there and reasons as why it is causing the error

for this sounds like it is an application error that is related to the program and not an issue of windows

i may be wrong !!!!

but the makers of the program should be able to answer your questions , if not check back you may find that you may have other advice waiting here

Mike

Read other 6 answers
RELEVANCY SCORE 64

I'm hoping someone can help me with my problem. I have Windows 7 Home 64-bit. Whenever I try to upload a document (like an email attachment) I get the BSOD. It occurs when my document box pops up so I can select the document I want to attach. The box doesn't fully load - and BSOD. This occurs in email and other websites in Firefox, Chrome and Open... but not in IE for whatever reason. IE is ok. When troubleshooting, I attempted to read the dump files - but BSOD again. I do have the info when my computer reboots and I'm hoping someone can help me:

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 1033

Additional information about the problem:
BCCode: 1e
BCP1: FFFFFFFFC0000005
BCP2: FFFFF88007BBCC40
BCP3: 0000000000000000
BCP4: 0000000000000000
OS Version: 6_1_7601
Service Pack: 1_0
Product: 768_1

A:BSOD when trying to Upload Documents or Read Dump Files

Post it following the Blue Screen of Death (BSOD) Posting Instructions

Read other 9 answers
RELEVANCY SCORE 64

Hi. Okay, my reasons for needing to get a crash dump may seem kind of funny... but, anyway here's what's going on. I'm trying to patch Windows 7 to work on a Pentium 1 MMX. Now that you're laughing, no my main computer is an 8 core FX-8150.

I just want to see this happen, because it would be interesting to see how it runs. Anyway, I have an old socket 7 motherboard that is late-model so it has ACPI support. Windows 7 runs fine on it when I have an AMD K6 installed. The K6's instruction set is identical to the Pentium 1 MMX, being 5x86 + MMX support.

However, when swapping the CPU out with a P1 MMX Windows 7.. it crashes during the boot phase shortly after showing the Windows logo on the "Starting Windows" screen. There is a STOP 0x5C blue screen. 0x5C code means HAL init failed.

Considering that the CPU instruction sets are totally identical, I am led to believe that this is an artificially generated error because MS just doesn't want it to run on a CPU as old as the Pentium 1 MMX.

Anyway, I have it all set up to create dump files on a blue screen and I'm using the "bootdebug" option when it starts. It just doesn't create any dumpfiles though. It also doesn't create ntbtlog.txt if I tell it to, or when trying safe mode.

I need the dump files so I can figure out what part of the HAL init fails with WinDbg, so that I can analyze the HAL library in IDA pro and patch the code to skip the (what I think is) artificial error generation.

Does anybody know w... Read more

A:Dump files not created for boot crash

Here's my DRAFT page on BSOD generation: BSOD Crash Dump Generation
It's a draft because I'm pretty sure there's some missing info, but I can't seem to locate it.

As such, I'm going to try attaching a live debugger (with another system) to the machine.
And, I'd expect that that is what you'll need to do also.

From what I've seen, there is no 'secret' block for Pentiums in place. I suspect the HAL spit out the error because the hardware changed - which is what it's supposed to do. Have you tried to install it with the Intel CPU already mounted? If so, what do the error logs look like?

Read other 6 answers
RELEVANCY SCORE 64

I think I have figured out how to post a BSOD Zip file now but, I was wondering what program is used to read one? I tried note book and all I saw was the word page over and over and then a few other odd looking things. Thanks!

A:what program is used to open the crash dump files?

Actually it's this, degugging tools for windows,

Download and Install Debugging Tools for Windows

There is a process to go through, quite a few threads here on how to,

Crash and lockup debug 'How To' - Windows 7 Help Forums

Read other 3 answers
RELEVANCY SCORE 64

[I tried a Search but did not find anything, perhaps my search terms were not so good ]

I have a few application crash dump files (.dmp) in ...\AppData\Local\CrashDumps. Can I delete them safely using Windows Explorer?

I have already removed the reports from the Acton Center and Disk Cleanup did not touch them.

A:Q: Delete application Crash Dump files?

I cant see a problem with it.

Read other 3 answers
RELEVANCY SCORE 63.2

Just the last 2 days I've had these crashes when playing BF3. I had been playing it with no problems until yesterday.

A:Black Screen Then Crash, Dump Files Created

  
Quote: Originally Posted by Cybex


Just the last 2 days I've had these crashes when playing BF3. I had been playing it with no problems until yesterday.


There are a couple of things that need to be examined

1- In the earlier DMPS you show bit defender and it is listed as the cause. Are you still using it?
2- In the later DMPS the crashes point to hardware. Have you made any hardware changes? QAre you overclocking?
3- A quick search of BF3 yields 174, 000 hits on the query of BSOD in win 7. DO you have the most up to date version of the game??


This is the generic help for hardware

Your .dmp file shows a stop error of 0x124 which is a general hardware error .

A "stop 0x124" is fundamentally different to many other types of bluescreens because it stems from a hardware complaint.

Stop 0x124 minidumps contain very little practical information, and it is therefore necessary to approach the problem as a case of hardware in an unknown state of distress.

Some generic advice.

If you are overclocking STOP. return to the default settings at least for now.
If you are running a RAID update its driver.
You can read more on this error and what to try here... Stop 0x124 - what it means and what to try

Read other 4 answers
RELEVANCY SCORE 63.2

Hi all,

First time poster here(although I've used the forum as a resource forever). I have a Lenovo u410 Ultrabook with an odd problem that began 3-4 months ago that I've been unable to resolve.

Whenever the laptop resumes from sleep mode it forces a complete restart and fails to create a dump file. I have verified that windows is set to create dump files and if I force a crash in some other way I will get a dump file but when it crashes when trying to resume my minidumps folder remains empty.

As far as I can tell it enters sleep mode fine and it's not until it tries to resume that the reboot is triggered. When the problem began I was on Windows 8 and since then have upgraded to 8.1 in the hopes of it helping (which it didn't). The laptop was able to sleep normally for the first 2-3 months I had it.

Things I have tried so far:
Installing all the official drivers from the Lenovo support website.Running system file checker.Running the Microsoft Safety Scanner.Sleeping with no peripheral devices connected, tried both while running on AC and battery.Removing and re-seating the memory.Refreshing windows (I haven't tried a complete reset yet, hoping to avoid that if I can).

In event viewer I get the following error and critical event each time after it reboots:
Error: The previous system shutdown at <time> on ‎<date> was unexpected.Critical: The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped respondin... Read more

A:Laptop crash on resume from sleep. No dump files!

For starters:





At work we start all repairs with a set of diagnostics. Often they find problems that weren't even expected. It's a waste of time to try to fix software on a system that has hardware problems.
Please try these free diagnostics for starters: Initial Hardware Diagnostics
Also, please ensure that you have ALL available Windows Updates (it may take several trips to get them all).



Check in C:\Windows for a file named MEMORY.dmp If you find it, zip it up and upload it to a free file-hosting service and post a link to it here.

Realtek network connection is disabled. Is this deliberate? If so, why?

I always suspect USB audio - do you have that installed (I haven't looked in depth yet)

This BSOD error points to networking issues:





10/25/2013 11:52 AM Windows Error Reporting Fault bucket 0x9F_3_POWER_DOWN_IMAGE_raspppoe.sys, type 0
Event Name: BlueScreen
Response: Microsoft Windows Error Reporting
Cab Id: eab793dd-25d6-4df4-a90e-f992528c40b1

Problem signature:
P1: 9f
P2: 3
P3: ffffe00006556390
P4: fffff8007c592840
P5: ffffe000143eb010
P6: 6_3_9600
P7: 0_0
P8: 768_1
P9:
P10:

Attached files:
C:\Windows\Minidump\102513-15062-01.dmp
C:\Users\Micah\AppData\Local\Temp\WER-49406-0.sysdata.xml
C:\Users\Micah\AppData\Local\Temp\WER46F7.tmp.WERInternalMetadata.xml

These files may be available here:
C:\ProgramData\Microsoft\Windows\WER\ReportArchive\Kernel_9f_d01be62a69c9bf52b0bc35a... Read more

Read other 6 answers
RELEVANCY SCORE 63.2

This computer has been crashing after coming out of sleep since I built it.

I appreciate any help on the issue. I have tried changing the hybrid sleep options, but it still crashes like clockwork.

A:Crash after Sleep,not creating dump files windows 8.1

Hi jeremy and welcome to the forums ^_^,

The Attached Zip file does not contain any Dump files for further analysis.

Could you please follow this guide and make sure that the Generation of minidumps has been enabled?

How to configure Windows to create MiniDump files on BSOD

Furthermore, if you are using any Cleaning software like CCleaner, please stop using them immediately as they delete the Minidump files which I think are required to help solving your problem. Also, make sure you run the SF Diagnostic Tool till it says that it has completed collecting the files.

Read other 1 answers
RELEVANCY SCORE 57.2

This is the first game I'm trying in Windows 7 (it's the RTM). The settings are maxed. After a while it crashes on a black screen, with "Out of range" message on the monitor sometimes.
The only way I got the game working was by installing the DirectX 9 that came on the DVD, otherwise the game kept on telling me it misses some D3D9 stuff. This worried me, but Dxdiag seems to report DirectX 11 fully functional.
Also, my videocard (it's speeds are stock) is heating very much with this game (88-90 Celsius), but this should be just fine with HD 4850. The fan also spins like crazy, in XP it never raised above 8700 rpm (which should be ok as far as I know), in this game + Win 7 it's going into 11000...
The CPU, a stock E7200 (2533 MHz) also heats up a lot - 55 Celsius (compared to other games in XP that I played), even if it never goes past 75% usage. Unreal (last ver.) engine games use it 100% and it stays on 50 Celsius. The CPU fan also spins like crazy for a game, 2200 rpm. In XP it never got past 1900 rpm in games, only in testing/benchmarking.
I tested the CPU (and memory) stability with Linpack (57-60 Celsius max), OCCT, and Everest too. The values I mention come from .csv files Everest is logging. The system is stable under the stress tests. As a matter of fact, the Wolfenstein gave my Win 7 the only BSODs and crashes.
Thank you for your help.


The actual event:

Log Name: System
Source: Microsoft-Windows-WHEA-Logger
Date: 20.08.20... Read more

A:Wolfenstein 2009: WHEA-Logger Event ID: 18 crash

The same thing happens to me quite oftenly, and only when I play Wolfenstein 09. It really heats up my GPU and most of the time my PC ends crashing in a BSOD. I don't know what this game does to stress the computer that hard, no other game does it. I do hope they release a patch for it, to make it playable. It's a pity really. I even bought an additional case cooler, but not even that helped in the end

Read other 9 answers
RELEVANCY SCORE 56.4

Hey all,
I'm having an issue with my ASUS F5GL laptop. If I try to launch a game like Counter-Strike: Source, Garry's Mod or Just Cause 2, not long after actually leaving the menu and beginning to play (anywhere between 2-5min), the whole laptop just silently crashes. I checked ALL the logs, and there is nothing in there, except something recorded at boot, saying the computer was not cleanly shutdown. When it does crash, a second before it crashes, a weird thin horizontal line appears in a random location on the screen, going all the way across the screen. This was happening under Windows Vista, but I just bought and did a clean install of Windows 7 Home Premium, and it's still happening. I have updated my drivers and it still happens. Laptop info is below (caution, large block of text)

Code:
System Information report written at: 04/21/11 15:41:47
System Name: BODENEAMONN-PC
[System Summary]

Item Value
OS Name Microsoft Windows 7 Home Premium
Version 6.1.7600 Build 7600
Other OS Description Not Available
OS Manufacturer Microsoft Corporation
System Name BODENEAMONN-PC
System Manufacturer ASUSTeK Computer Inc.
System Model F5GL
System Type X86-based PC
Processor Intel(R) Pentium(R) Dual CPU T3400 @ 2.16GHz, 2167 Mhz, 2 Core(s), 2 Logical Processor(s)
BIOS Version/Date American Megatrends Inc. 214, 16/03/2009
SMBIOS Version 2.5
Windows Directory C:\Windows
System Directory C... Read more

A:Complete system crash (no BSOD or crash dump) when trying to launch most games.

Hello

You can try these to see what is going on with the overheating.

Core Temp

CPUID - System & hardware benchmark, monitoring, reporting

Read other 4 answers
RELEVANCY SCORE 55.6

My laptop, Packard Bell Easynote TM81, has been crashing and restarting by itself, and when it does, the ENTIRE system will not respond. So I try to format the entire thing, and after a few days, when I have gotten used to it, it comes up with a screen for 1 second, and all I could read was "system memory dump" and "CPU memory dump". So during this month, I have had to format the entire thing OVER AND OVER. I can't reinstall the system, because I am using a laptop, which comes with no Windows 7 CD. Please help!

A:Laptop crash no response memory dump crash

It honestly sounds like a heat related issue to me, if you could follow the instructions here:
http://www.sevenforums.com/crashes-d...tructions.html

one of the bsod readers here could help you.
Or perhaps even myself if I ever get the time to reinstall the debugging software on my system.

Read other 1 answers
RELEVANCY SCORE 55.6

Hi all

I'm new to these forums and hope someone out there may be able to help?

Here is a brief description of events.

Windows vista started running slow whilst browsing the web. As we had had a similar problem earlier this year. A problem/virus I rectified with rootkill and caused by Antivirus suite (virus). I decided to run the rootkill programme in safe mode and started up the Malware Antivirus software (all in safe mode). The Malware software located 22 infections. These were subsequently cleaned / quarantined. I attempted a normal restart and the system came up with blue screen and crash dump.

Despite attempts in all modes of start up the vista will not boot? Just keeps crash dumping? I've run windows vista start up repair without success. Repair window says:-

Start up repair cannot repair this computer automatically

I've run the repair disk several times and it just keeps coming up the same. If this has been caused by virus/spyware can anyone offer any suggestions?

Thanks in anticipation of anyone?s assistance.

A:Crash dump - Vista will not start and just keeps crash dumping

Hi, paulpsb Lets give it a try. Attempt a System Restore to restore the computer to an earlier date throughout the Recovery Environment in your CD. If that does not resolve the issue, follow these steps. You will need a USB drive. (Despite the OS is Vista, it will also be nice to know if you have a Windows XP installation CD, as we can have other options to try.)Download GETxPUD.exe to the desktop of your clean computerRun GETxPUD.exeA new folder will appear on the desktop.Open the GETxPUD folder and click on the get&burn.batThe program will download xpud_0.9.2.iso, and upon finished will open BurnCDCC ready to burn the image.Click on Start and follow the prompts to burn the image to a CD.Next download driver.sh to your USB driveRemove the USB & CD and insert it in the sick computerBoot the Sick computer with the CD you just burnedThe computer must be set to boot from the CDGently tap F12 and choose to boot from the CDFollow the promptsA Welcome to xPUD screen will appearPress FileExpand mntsda1,2...usually corresponds to your HDDsdb1 is likely your USBClick on the folder that represents your USB drive (sdb1 ?)Confirm that you see driver.sh that you downloaded therePress Tool at the topChoose Open TerminalType bash driver.shPress EnterAfter it has finished a report will be located on your USB drive named report.txtRemove the USB drive and insert it back in your working computer and navigate to report.txt

Please note - all text entries are case sensitiveCopy and pas... Read more

Read other 9 answers
RELEVANCY SCORE 55.6

Hi. I've recently been trying to play Metal Gear Solid 5 but every time I boot it up my PC either crashes as soon as the splash screens are done or after a few minutes. It's been crashing while playing other games as well but it's been much rarer. It's not a BSOD crash and it doesn't produce any crash dumps so I'm leaning towards it being a problem with either the PSU, the motherboard or one of the graphics cards. Any help with finding the cause of this would be appreciated.
 
The PSU model is fd-psu-newt2-800, the graphics cards are both Nvidia GTX760s and the motherboard is a ASUS Sabertooth Z77

Read other answers
RELEVANCY SCORE 53.6

I've been having BSoD's for well over a year now, once or twice almost every day. I've tried multiple times to figure out whats wrong but... I dont have ANY dump files.

I've followed instructions on how to enable them but it still doesn't create a file. Im really hoping you all can help me out here.

The current settings are:
Page files on both hard drives enabled.
Set custom page size to 17000MB-20000MB
System managed size and no paging file boxes are unchecked
Write an event to system log box checked
Automatically restart unchecked
Debug information set to small memory dump/kernal. Both settings dont work
Overwrite existing file box is greyed out when debug is set to small memory. Checked when set to kernal
Small and kernal memory dump location set to C:\Windows\Minidump and C:\Windows\Memory.DMP I created these folders as they were not present

I got a SSD awhile back and use it for my windows. However i didnt reformat my other hard drive and windows is still installed on the old one however i boot from the SSD (maybe this is some how the problem)

Im using WhoCrashed from Resplendence Software - Advanced System Tools and Developer Components to force a BSoD when trying to creat a dump file.

There are NO files in either folder. Both on the SSD or old hard drive.

I've searched many forums now and found others with what seems to be the same problem but with no solutions. I would VERY much appreciate the help!
The BSoD's seem to mostly happen when play... Read more

A:No dump file after BSoD. Dump files ARE enabled

Wrote stuff that was wrong. Ignore this reply

Read other 9 answers
RELEVANCY SCORE 50.8

Could someone read my dump and let me know what happend after the BSOD?

A:Please read my dump?

Hi -

The bugcheck = 0xf4 = an object critical to Windows was suddently terminated.

Probable cause - Trend Micro Internet Security -

Code:
tmevtmgr.sys Mon Jul 06 02:10:28 2009 (4A519554)
I believe these drivers were involved as well (specifically the 1st 2) -

Code:
DSI_SiUSBXp_3_1.sys Tue Feb 06 18:12:17 2007 (45C90B51) - a gaming patach ..?
SiLib.sys Tue Feb 06 18:09:13 2007 (45C90A99) - USBXpress 64 bit
nvm62x32.sys Fri Oct 17 17:00:39 2008 (48F8FCF7) - - NVIDIA nForce Networking
Update NVIDIA nForce --> Drivers - Download NVIDIA Drivers

As for the first 2 - they appear to be a possible gaming patch.

I would suggest that you remove Trend Micro --> http://esupport.trendmicro.com/suppo...tID=EN-1037161

Use Microsoft Security Essentials --> http://www.microsoft.com/Security_Essentials/

Regards. . .

jcgriff2

.


Code:
Opened log file 'C:\Users\PalmDesert7\_jcgriff2_\dbug\__Kernel__\_99-dbug.txt'
Microsoft (R) Windows Debugger Version 6.11.0001.404 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.

Loading Dump File [C:\Users\PalmDesert7\_jcgriff2_\dbug\__Kernel__\020910-16859-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available
Symbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7600 MP (2 procs) Free x86 compatible
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.16385.x86fre.win7_rtm.090713... Read more

Read other 3 answers
RELEVANCY SCORE 50.8

Can i get a read on this dump file please trying to find out why some games stop responding

Thanks

( Guess windows 7 zip wont upload will try again soon thanks )

A:dump read plz TY

  
Quote: Originally Posted by niklas


Can i get a read on this dump file please trying to find out why some games stop responding

Thanks


sure but you need to upload it first. use these to find and upload it. http://www.sevenforums.com/crash-loc...d-problem.html
thanks

Ken

Read other 1 answers
RELEVANCY SCORE 50.4

Im consistently getting the irql_not_less_or_equal error, and Id like to figure out whats causing it. I did a memtest so its not that faulty memory and nothing is overheating. Where on my computer can I find the logs or dump that record what happened, and would anyone be able to help me make sense of them?

A:irql_not_less_or_equal read dump

Hi,

Lets get some more info on your system so we can troubleshoot easier:

1. Download SysInternals AutoRuns from Microsoft TechNet - save to My Documents directory

http://live.sysinternals.com/autoruns.exe

2. Download Sysinfo collection app - save to My Documents -

http://jcgriff2.com/BSOD_XP_v1.3_jcgriff2_PROD_.exe

Run the second exe (it runs the first exe as well as other other applications that are included in XP)

You'll find a new folder in My Documents - TSF_XP_Support.

Please zip the folder up up and attach to next post.

Regards,
Reventon

Read other 1 answers
RELEVANCY SCORE 50.4

Please help me parse this dump log file. Our windows server 2003 has crashed recently 4 times.

Thanks,
Solomon
 

A:Please help read dump file

Your error is 0x00000050: PAGE_FAULT_IN_NONPAGED_AREA

This means requested data was not in memory and an invalid system memory address was referenced. This error can be caused by:

1. Defective memory (including main memory, L2 RAM cache, video RAM).

2. Incompatible software (including remote control and antivirus software) might cause this Stop message, as may other hardware problems (e.g., incorrect SCSI termination or a flawed PCI card).

This is what I suggest at this time:

A. Run memtest on your RAM for a minimum of 7 Passes. www.memtest.org

B. One processor of note is Sptd.sys which is a driver used by the CD Rom emulation program, Daemon Tools Version 4. There have been reports of problems with this driver. Google it and you'll see what I mean.

Therefore, either uninstall and then re-install or update this program.
 

Read other 2 answers
RELEVANCY SCORE 50.4

Can someone give me an idea whats going on here. Random Reboots have increased quite a bit of late.

Sometimes its when it has been in sleep mode. Other times normal locked desktop.

A:Mini dump to read please?

Are you sure it's random reboots?
Not an update that reboots your computer - as a window behind a window you're working on?
What happens when it reboots exactly?

Read other 5 answers
RELEVANCY SCORE 50.4

C:\Program Files\Support Tools>dumpchk c:\mini052110-03.dmp
Loading dump file c:\mini052110-03.dmp
----- 32 bit Kernel Mini Dump Analysis

DUMP_HEADER32:
MajorVersion 0000000f
MinorVersion 00000a28
DirectoryTableBase 00707000
PfnDataBase 81c46000
PsLoadedModuleList 8055d720
PsActiveProcessHead 805638b8
MachineImageType 0000014c
NumberProcessors 00000002
BugCheckCode 100000d1
BugCheckParameter1 00000006
BugCheckParameter2 00000002
BugCheckParameter3 00000000
BugCheckParameter4 b9e367d4
PaeEnabled 00000001
KdDebuggerDataBlock 8054d2e0
MiniDumpFields 00000dff

TRIAGE_DUMP32:
ServicePackBuild 00000300
SizeOfDump 00010000
ValidOffset 0000fffc
ContextOffset 00000320
ExceptionOffset 000007d0
MmOffset 00001068
UnloadedDriversOffset 000010a0
PrcbOffset 00001878
ProcessOffset 000024c8
ThreadOffset 00002728
CallStackOffset 00002980
SizeOfCallStack 00000534
DriverListOffset 00003148
DriverCount 0000007b
StringPoolOffset 000055d0
StringPoolSize 00001110
BrokenDriverOffset 00000000
TriageOptions 00000041
TopOfStack 805511cc
DebuggerDataOffset 00002eb8
DebuggerDataSize 00000290
DataBlocksOffset 000066e0
DataBlocksCount 00000004


Windows XP Kernel Version 2600 (Service Pack 3) MP (2 procs) Free x86 compatible

Kernel base = 0x... Read more

A:Who can read a dump file?

Hello Bry, not really up on this kind of thing but I have access to a beginners guide so would like to have a go but I think you need to zip the dump in its original ( .dmp ) format and then post it.

Read other 9 answers
RELEVANCY SCORE 50.4

hey guys, i been getting BSOD and getting fed up with it now. I have been looking everywhere about it and they ask me to read my dumpfile. well i would read it if i new what i was looking for but my computer skills are next to nothing. so pls help me and point me out to help fix my PC

Kind Regards
Ryan

A:can someone read my Dump file

Uninstall your current antivirus, it contributes to bsods. Use Microsoft Security Essentials & the Free version of Malwarebytes, update and make full scans separately:Uninstallers (removal tools) for common antivirus software - ESET Knowledgebase
Help protect your PC with Microsoft Security Essentials
Malwarebytes Free



   Note
Do not start the trial version of MalwareBytes

Also take a look at: Good & Free System Security Combination
Virus Check:Make scans with these tools below:TDSSKiller Rootkit Removal Utility Free Download | Kaspersky Lab US
Online Virus Scanner Eset
Application conflict:Reduce the start-up items. This will help avoid software conflicts:Remove Startup Programs in Windows 7
Clean Startup in Windows 7
System File CheckerThe SFC /SCANNOW Command - System File Checker scans the integrity of all protected Windows 7 system files and replaces incorrect corrupted, changed/modified, or damaged versions with the correct versions if possible. If you have modified your system files as in theming explorer/system files, running sfc /scannow will revert the system files to it's default state.Link to full tutorial: SFC /SCANNOW Command - System File Checker
Run Disk Check in Windows 7Run this on your Hard Drive(s). This will show you how to run Check Disk or chkdsk in Windows 7 to check a selected hard disk for file system errors and bad sectors on it. With both boxes checked for all HDDs and with Automatically fix file system error... Read more

Read other 1 answers
RELEVANCY SCORE 50.4

Hey everyone so I've been having some issues lately with my pc bluescreening randomly. I'm running Windows 7 Ultimate Sp1 x32 and can't seem to figure out what exactly is the issue with my computer. I've run chkdsk and have found no bad sectors

So I attached dump file and was wondering if someone could read it for me and possibly point me in the right direction? thanks in advance

A:Can someone please read my Dump file?

You've got an hardware issue here.. You should try
-MEMTEST
-PRIME95
-SEAGATE TOOLS

Hope this gets you going.

Read other 6 answers
RELEVANCY SCORE 50

My desktop will give the "repair" or "start windows normally" screen... when i select start normally it seems to process but doesn't. After some time it goes to a screen that talks about crash dumps.... that screen flashes "dump physical memory" then its gone. Next the hp screen with "boot menu" "setup" and "system recovery" appears. When that screen goes away it goes back to "start windows normally"

Read other answers
RELEVANCY SCORE 50

hi
When I play, at different times it happens
OS: windows 7 service pack 1 64bit
Motherboard: Gigabyte P55-USB3
CPU: intel core i5 760
Ram: 16GB (8*2 Dual Chanel) G.Skill
GPU: Inno3D iChill GTX 980 HerculeZ X4 Air Boss DHS
Power: Green GP685B
hard (first boot): HDD 1TB seagate
HDD 1TB seagate
HDD 4TB green western digital

 

A:Crash dump

Go to C:\windows\minidump and select all the .dmp files. Right-click sending these files to a compressed(zipped)folder. Upload this folder as a file here
 

Read other 1 answers
RELEVANCY SCORE 50

Bought a new HP computer with Windows7. Has plenty of memory and large hard drive. I copied my old files from an XP machine. Have not installed any new hardware. Every time I use the machine, and especially when on the net, the system stops functioning and I get the BSOD with a warning it is performing a crash dump. The screen stays on for a few seconds and then I am asked to restart windows. I cannot understand all the messages but it does mention problem with new hardware or software. I have seen many ads for programs that update drivers, is this the first step? It is a real annoyance to constantly restart windows. HELP!!

A:crash dump

How old is this lap top?We need to know more about your BSODs...Download BlueScreenView (in Zip file)No installation required.Unzip downloaded file and double click on BlueScreenView.exe file to run the program and When scanning is done, go to Edit > Select All.Then go to File > Save Selected Items, and save the report as BSOD.txt.Open BSOD.txt in Notepad, copy all content, and paste it into your next reply.Compliments of Broni

Read other 6 answers
RELEVANCY SCORE 50

My computer, each time I boot it and i'm at the loading screen on Windows 7 where it says ''welcome'', it shows me a blue screen concerning a crash dump or something... I have no idea what to do. I tried rebooting it of course but nothing. I currently running safe mode with networking. I tried to unplug the power cable for 30 seconds but still nothing. I checked if everything was plugged and it's ok. I don't know if it can be useful but I link all the dump files of today.

Sorry for my bad english...
 

A:Crash dump?

Read other 7 answers