Over 1 million tech questions and answers.

failed new Windows Update installer code 800F081F after code 80072EE2

Q: failed new Windows Update installer code 800F081F after code 80072EE2

Hello,

I have been working patiently for the better part of three days, but cannot resolve the issue. I can no longer use Windows Update. Something seems to have happened on or after 19 July -- the final date that updates were installed. Thereafter, only failure messages in the log (now wiped clean, as a result of following one of the suggestions I found). When I click "check for updates", I receive a message that a problem occurred. The error code is 80072EE2
When I then click in that same window on "Check online for updates from Microsoft Update" I always get the message "Install new Windows Update software. To check for Windows Updates, you must first install an update for Windows Update. Install now." Naturally I click on this, only to receive error code 800F081F.

I have tried out several suggestions that did seemed relevant, including the 12 methods I found at
Windows Update service not running/ cmd says parameter incorrect - Microsoft Community

While trying to execute Method 5, I found that HKLM\COMPONENTS was missing from view. I found instructions on how to use Load Hive to make this visible again. No difference to Win Update.

I skipped Method 7, because my antivirus software is a MS product and has been in use for years, without any problems.

Method 10 proved impossible to execute: it seems to contain outdated information: you can no longer manually download these elements; instead you are redirected to a page that helpfully (irony) tells you that you should use Win Update on your own PC.

Method 11 tells me to take ownership of pending.xml: that is not present on my system.

Method 12: chkdsk results in the answer: "the drive, the path, or the file name is not valid"
I have now found this forum and have followed the instructions here to prepare for asking help.
Windows Update Posting Instructions

SURT has been run once more
SFC scan has not found any problems
I have included the error codes and described the sequence in which they are presented to me.
I attach the logs: however, the copy of the entire CBS folder is too large as a zip to attach (12 MB), so I have only attached the most recent logs.
Oh yes, and I have also "lost" my internal CD/DVD-drive somewhere en route: the driver has been identified as correct, but it won't appear in file explorer anymore, nor do (music) DVDs start up anymore when inserted. So I can also not make recovery DVDs etc.

I am very much hoping someone can help me, or maybe just tell me that it's OK to continue working without any Windows and Office updates coming in ? So far, my main programs (Outlook, Firefox, Word) seem to be doing fine.

Thanks,

Gert

RELEVANCY SCORE 200
Preferred Solution: failed new Windows Update installer code 800F081F after code 80072EE2

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: failed new Windows Update installer code 800F081F after code 80072EE2

Sounds likely to be a malware infection to me.
The error code you are getting implies that WU cannot access the servers at MS.

Please download and install Malwarebytes Anti-malware (free version) from http://www.malwarebytes.org/products/malwarebytes_free/ - UNtick 'Enable free trial of MBAM Premium' at the end of the installation - and update it, then run a full scan in your main account, and Quick scans in any other user accounts.

Quarantine everything it finds

Read other 9 answers
RELEVANCY SCORE 115.6

i keep getting these two error codes every time i try to update these programs through windows update: Update for Windows 7 (KB974332) Update for Windows 7 (KB974431) Update for Windows 7 (KB976098) Ive tried to download these updates from the download centre with out any success. please help me to fix this problem im using is windows 7 ultimate 32 bit

A:error Code 800F081F and Code 8024200D with window 7 update

Hello,Some third party programs can affect the Windows Update service. If you are running any third party applications such as Spyblocker, Internet or web accelerators (programs designed to boost the speed of the Internet connection), security or anti-virus programs (Norton, McAfee, etc.), I recommend you temporarily disable or uninstall them and then try accessing Windows Update later. If the problem still happens, try the following steps:Rename the Windows Update Softwaredistribution folder================================================1. Close all the open windows. 2. Click "Start", click "All programs", and click "Accessories". 3. Right-click "Command Prompt", and click "Run as administrator".4. In the "Administrator: Command Prompt" window, type in "net stop WuAuServ" (without the quotes) and press Enter.
Note: Please look at the cmd window and make sure it says that it was successfully stopped before we try to rename the folder. However, if it fails, please let me know before performing any further steps and include any error messages you may have received when it failed.
5. Click "Start", in the "Start Search" box, type in "%windir%" (without the quotes) and press Enter.6. In the opened folder, look for the folder named "SoftwareDistribution".7. Right-click on the folder, select "Rename" and type "SDold" (without the quotes) to rename this ... Read more

Read other 2 answers
RELEVANCY SCORE 108.4

I can't check for updates for some reason. The thing is, I think this may be part of a larger issue with connectivity. I'm also having connection issues with gmail and youtube as well. In Gmail, sometimes things don't load after I click on them, and I can't attach files to e-mails. Another forum I like to go to loads very slowly on firefox and won't load at all on IE 11. My internet appears to be fine as most sites aren't giving me trouble that I know of. Are they all connected?

I did do a windows update last week and installed a bunch of security updates and everything seemed fine then. So, what's going on? I can't attach the CBS folder, as it is way too big. It is 285 MB. Is that normal?

I ran SURT and it installed hotfix KB947821 and it didn't fix anything. I then ran sfc /verifyonly and it said there were no violations.

A:Windows Update error code 80072EE2

Hi Canuck or Die & welcome to sevenforums.

Probably some corrupt/missing files/folders

CBS folder can be large don't need entire folder

Run SURT & post CheckSUR.log

located at: C:\Windows\Logs\CBS

Read other 2 answers
RELEVANCY SCORE 108.4

Hi,
I can't get updates as evidenced by the error code above. Any other info needed?
thanks
casey

A:Windows 7 won't update error code 80072EE2

Windows Update error 80072ee2
Same with 7

Try again, and see what happens. Good luck

Read other 1 answers
RELEVANCY SCORE 108.4

My antivirus software recently began detecting all kinds of infections, and windows defender has also been giving me alerts so after attempting to disinfect the files i went to windows update and realized that it hasnt been updated since late April. I tried to update it then and it gave me error code 80072ee2 and would not allow me to update. also my antivirus software will not update either. I'm not quite sure what to do at this point but any help would be appreciated. thank you.

A:Windows Update Error Code 80072EE2

Hello and welcome to Bleepingcomputer.Please go to this link and download MalwareBytes by clicking the FREE version of it, install MalwareBytes and update it by going to the UPDATE tab.Once it has updated please run the program with a fullscan and let it finish.MalwareBytes will create a log, save it to your desktop. If it finds any infections please allow it to remove what it finds.If it fails to run, run it in safe mode, by rebooting and pressing the F8 key when you see the windows splash screen.If your computer is infected, your post will be refered to someone in our malware removal team.Please post back your results.Mawarebytes Anti malware http://www.malwarebytes.org/Bruce.

Read other 3 answers
RELEVANCY SCORE 108.4

I could not update my Windows 7 for last month. Usually I get this error or checking for update is infinite. I did not change any of my hardware nor the router. I did not change my firewall and I use microsoft security essentials. Please reply

A:Windows Update , error code 80072EE2

Have you EVER used Norton or McAfee products on that machine?
Try resetting the winsocks....
In an Elevated Command Prompt window, run the command

NETSH WINSOCK RESET

reboot on request, and test Windows Updates

Read other 9 answers
RELEVANCY SCORE 108.4

Have not been able to update since August 27, 2015 when updates were installed.

Read other answers
RELEVANCY SCORE 107.6

My Windows Update has been failing to update for a while now and I can't seem to find the solution. Here's the run-down of what happens step by step:Launch an update scan for Windows Update
It scans for a few seconds then says:





Quote:
Install new Windows Update software

To check for updates, you must first install an update for Windows Update.



Once I click Install it begins to "Install and Update," but then immediately returns to "Checking for Updates."
The next box I see says:





Quote:
Windows could not search for new updates

An error occurred while checking
for new updates for your
computer.

Error(s) found:
Code 800F081F


This happens every time I've attempted to update. After looking up the error code, I found the main Windows site that gave me the following explaination:
If you receive Windows Update error 800F081F, it means that Windows Update or Microsoft Update cannot determine the cryptographic service provider, or a file Windows Update requires (named catalog store) is corrupted.

I've looked through multiple Windows forums and How-To's and have tried all the fixes I found. SURT, sfc/ scannow, the standalone download for WU, Windows Update Diagnostic, multiple malware scans, and Microsoft Fixit. Ultimately, I always get the same error code, (800F081F).

I should also say this problem has been here for a few months now, and it's becoming more worrisome as more time passes. The longer I... Read more

A:Windows Update fails to update, error code 800F081F

Hi Mookeylee & welcome to Sevenforums.

Please follow Windows Update Posting Instructions

We need to see the logs to determine the cause of the error.

Worst case scenario, and last resort, repair install windows 7. No big deal I just did 2 yesterday win7x64 Home Premium. Brink posted a great tutorial Repair Install.

Read other 3 answers
RELEVANCY SCORE 107.2

i just reinstalled windows vista home premium last last week but up to now i couldn't update... the first error i got was 8024402C.. then after "google-ing" my problem, i found some tips like replacing the preferred and alternate dns.. but still i couldn't update.. the error code is 80072ee2.. please help....

A:Windows Vista Update Error Code 80072ee2

Hi, I just saw this problem in another forum and the person who had the problem said to do the following , See if it helps you to.

1) Go to Start -> Run
2) Type in MSCONFIG and press enter
3) Under the 'BOOT' tab, tick the 'Safe Boot' box and select 'Minimal'
4) Press OK and proceed to restarting the computer when prompted
5) Once computer restarts log in and open Window Explorer
6) Navigate to your Windows directory and look for SoftwareDistribution
folder
7) Rename this folder to SoftwareDistribution.old
8) Go back into MSCONFIG and turn off 'Safe Boot' and restart
9) Run Windows update again.

SUMMARY: Windows has somehow managed to corrupt its own system files,
possibly during one of its previous updates... Once you get the Windows
update to work, you will notice that Windows Defender will start to
work.

HIH

Read other 7 answers
RELEVANCY SCORE 106.8

Hi there,

I'm having an issue with a laptop running Windows 7 Home x64 SP1. It has failed to install Windows Update Agent 7.6.7600.320 and keeps trying every time I try to run updates.

I've downloaded the installer and tried to run it manually, but that gives me the error 0x80070002

I've attached my CBS log from the last time I attempted the install. Any help will be much appreciated!

A:Windows Update Agent install fails, Error Code 800F081F

The v320 update installer isn't commonly available (unless you know where to look) - where did you attempt to download it from?

Here's the error-sequence from your log...

Code:
2014-09-10 23:15:06, Info CBS Exec: Staging Package: WUClient-SelfUpdate-Core-UIComp~31bf3856ad364e35~amd64~pt-PT~7.6.7600.256, Update: UI, PinDeployment: amd64_microsoft-windows-w..oyment-languagepack_31bf3856ad364e35_7.6.7600.256_pt-pt_76bae7f7dbc23d63
2014-09-10 23:15:06, Info CBS Calling client to resolve source, cannot find file 'wuaueng.dll.mui' at path: \\?\C:\Windows\Servicing\Packages\amd64_microsoft-windows-w..ient-core.resources_31bf3856ad364e35_7.6.7600.256_zh-cn_8aefebe76d4c7c4f\wuaueng.dll.mui
2014-09-10 23:15:06, Error CBS Exec: Failed to pre-stage package: WUClient-SelfUpdate-Core-AdmComp~31bf3856ad364e35~amd64~pt-PT~7.6.7600.320, file: wuaueng.dll.mui, source: \\?\C:\Windows\Servicing\Packages\amd64_microsoft-windows-w..ient-core.resources_31bf3856ad364e35_7.6.7600.256_zh-cn_8aefebe76d4c7c4f\wuaueng.dll.mui, sandbox: (null) [HRESULT = 0x800f081f - CBS_E_SOURCE_MISSING]
2014-09-10 23:15:06, Info CBS Failed to gather all required files. [HRESULT = 0x800f081f - CBS_E_SOURCE_MISSING]
2014-09-10 23:15:06, Info CBS Failed to gather all missing files for package: WUClient-SelfUpdate-Core-TopLevel~31bf3856ad364e35~amd64~~7.6.7600.320 [HRESULT = 0x800f081f - CBS_E_SOURCE_MISSING]
2014-09-10... Read more

Read other 4 answers
RELEVANCY SCORE 102

Just built a new gaming pc myself, all new parts, first build so maybe there's something I'm not doing right. But I was following this guide for windows 8.1 installation However I decided not to do any of those tweaks under "System Setup after Installation" I just skipped to installing drivers so it's a pretty normal installation. That's just extra information, probably not relevant.
 
Installed windows 8.1 OEM.
 
Installed my drivers and I connected to internet but when I try to check for windows updates I get this error
 
Code: 80072EE2
 
Looked online for a solution, found one on windows website. I then downloaded WindowsUpdateDiagnostic from another PC and ran it on the PC i'm having issues with, it fixed something but I still can't update.
 
 
I also can't open a webpage using internet explorer even thought I'm connected to the internet. When I type any address it just loads "waiting for ..."
I've also noticed that windows is not activated when I try to activate it I get "Windows can't activate. Try again later."
 
Don't know if relevant but I actually installed Windows the first two times incorrectly, I mean it installed fine but I was trying to install on a GPT formatted SSD (used diskpart with command prompt at windows install window to clean and convert to GPT) but even though I formatted with GPT I kept ending up with a MBR formatted SSD. The problem was I wasn't booting from a UEFI Device. Third time I made sure I did and it worke... Read more

A:Can't run Windows Update on newly installed Windows 8.1. Error code: 80072EE2

Solved it myself! Only took half the day... All I did was just delete all files and folders in my temp folder and suddenly poofff! like magic I could access the internet and I can update windows. I'm installing updates right now hopefully once I restart my computer it'll still work!
Here is where I found the solution
http://www.tomshardware.com/answers/id-1946566/laptop-connection-shows-connected-access-internet-application.html

Read other 1 answers
RELEVANCY SCORE 101.2

I have Win7 SP1 64 bit. Windows Update Agent 7.6.7600.320 fails to install and now I can't get any Windows updates. I can install other updates if I download the standalone update files from Microsoft's website, just not the Update Agent.

When Windows Update tries to update to the WU Agent 7.6.7600.320 I get the 800F081F error.

I downloaded the standalone update file (from Update to Microsoft Update client) and tried to install it, and I got the 0x80070002 error.

I have used both admin account and my regular account while attempting the install.
What I have tried so far:

- sfc /scannow - found no errors
- installed Windows Update Readiness Tool (May 2014)
- Microsoft Fixit
- Windows Update Diagnostic
- checked my computer with 3 different virus/malware scanners (not at the same time, and only one of them
is for real time scanning, the two others are on an usb stick just for on demand scanning) and nothing was found
- even tried to change DNS on to 8.8.8.8 and 8.8.4.4. and still no go
- renamed the "Software Distribution folder" so a new one was created
- tried the install with clean boot, but nothing
- instructions from Windows Update error 80070002 - Windows Help didn't help either
Any help with this would be much appreciated. Attachment 332188.

A:Update errors: Code 800F081F and 0x80070002

The CBS.log is stuffed with this error...

Code:
Line 46368: 2014-09-01 16:15:00, Info CBS Calling client to resolve source, cannot find file 'wuaueng.dll.mui' at path: \\?\C:\Windows\Servicing\Packages\amd64_microsoft-windows-w..ient-core.resources_31bf3856ad364e35_7.6.7600.256_cs-cz_e813361d9f3045df\wuaueng.dll.mui
Why this isn't found by SFC I'm not sure - unless you're using a hack to have multiple languages installed in a Home Premium machine. Technically, that file shouldn't be there anyhow, so I don't understand why Windows is looking there in the first place.

Let's have a bit of a look at the system in a more general way...
Please follow the instructions here Blue Screen of Death (BSOD) Posting Instructions - but just post the resulting file here in your reply.

Read other 9 answers
RELEVANCY SCORE 101.2

Hi NoelDP,

When Im trying to run Windows updates to search for new updates, Im getting the same error over again:
Code 800F081F - There is a unknown error in Windows update.

To fix it, I tried all sorts of things, but without luck, like:
- Run the System Update Readiness tool (CheckSur.exe), deleting updates, manual installing updates, recovery points.

It is a Windows 7, Home Premium with SP1, 64 bit, HP Laptop.

My CheckSUR.txt:

=================================
Checking System Update Readiness.
Binary Version 6.1.7601.22471
Package Version 26.0
2015-02-03 14:08

Checking Windows Servicing Packages

Checking Package Manifests and Catalogs

Checking Package Watchlist

Checking Component Watchlist

Checking Packages

Checking Component Store
(f) CSI Manifest Failed Catalog Check 0x00000000 winsxs\Manifests\amd64_microsoft-windows-t..cesclient.resources_31bf3856ad364e35_6.1.7601.18540_en-us_d29f327284d9f088.manifest amd64_microsoft-windows-t..cesclient.resources_31bf3856ad364e35_6.1.7601.18540_en-us_d29f327284d9f088

Summary:
Seconds executed: 3214
Found 1 errors
CSI Manifest Failed Catalog Check Total count: 1

Unavailable repair files:
winsxs\manifests\amd64_microsoft-windows-t..cesclient.resources_31bf3856ad364e35_6.1.7601.18540_en-us_d29f327284d9f088.manifest

------------------------------------
My CheckSUR.persist.txt:


=================================
Checking System Update Readiness.
Binary Version 6.1.760... Read more

A:Error Win7 update: Code 800F081F

The update which is failing is: windows update-agent 7.6.7600.320
Perhaps there is way to download this update manually?
The CBS files are growing I see, I have now put the latest here: WeTransfer (.RAR 31 MB)

Thanks

Read other 9 answers
RELEVANCY SCORE 100.4

Hello everyone,

I have a couple of users here on our network that are using Windows 7 but are unable to receive updates at all. They are able to access the internet. That particular office accesses all of their programs via a Citrix connection. They are using a SonicWall Firewall. There are only a handful of users who are using Windows 7 there, and they are the only ones having problems with automatic update. All of the XP users are having no problems at all. I have disabled the ethernet device, but that didn't work. Can I please get some help?

A:Update Error Code 80072EE2

  
Quote: Originally Posted by BBR


Hello everyone,

I have a couple of users here on our network that are using Windows 7 but are unable to receive updates at all. I have disabled the ethernet device, but that didn't work. Can I please get some help?





We need so much more info. Are they able to surf the net? what firewall and anti virus are they using? what is the network setup? etc

Ken

Read other 2 answers
RELEVANCY SCORE 93.2

Hello!

I have been unable to update windows even after trying a plethora of "solutions" on the net.

I'm enumerating the problems and the steps I've tried to rectify them for your kind perusal.

My specifications are:

OS: Microsoft Windows 7 ProfessionalVersion: 6.1.7601 Service Pack 1 Build 7601
System Manufacturer: Lenovo
System Model: 2767W3A (T400)
System Type: x86-based PCProcessor: Intel Core 2 Duo CPU T9400 @ 2.53GHz, 2534 Mhz, 2 Core(s), 2 Logical Processors Installed
Physical Memory (RAM): 2.00 GB

For Internet access, I'm using Easy Tether Lite (No root), tethered to my laptop viaSamsung Galaxy Duos GT-I8552 v. 4.1.2

Everything was hunky-dory till a fortnight ago when these problems started.

These are the problems I'm having:

1.) I'm unable to update windows even after setting it to automatic update.First it gave the error code 80072F78 but now it's persistent with 80072EE2.

2.) In the Device Manager - Other devices, the following two programs (devices?) have yellow exclamation marks, and even after trying innumerable times I haven't been ableto update their drivers. These same two devices are listed as 'Problem Devices' in System information. The error code for all of these is that the drivers for these devices is notinstalled (and I'm unable to download them).
A) PCI Serial Port
B) PCI Simple Communications Controller

3. I'm able to access some sites but not others through both Internet Explorer (11) and Google Chrome. For instance, I c... Read more

A:Windows Error Code 80072EE2

You seem to have tried a lot. Maybe time to try a reset? Windows Update - Reset

Read other 2 answers
RELEVANCY SCORE 93.2

I tried to check for windows updates, it gives me a notification for update required for windows update, but it gives me a message of (Windows could not search for new update, code 800F081F).

CBS Logs are in the attachment.

Regards,

A:windows 7 x64 could not search for new updates, error code 800F081F

CheckSUR shows the following problems...

Code:
Unavailable repair files:
winsxs\manifests\amd64_305895c659d1ec256802c823f05edcf3_31bf3856ad364e35_11.2.9600.17107_none_a04fc4acb2745cf9.manifest
winsxs\manifests\x86_microsoft-windows-w..-activex.deployment_31bf3856ad364e35_7.6.7600.256_none_dfc0282f0e6d6c2a.manifest
servicing\packages\Microsoft-Windows-UIAnimation-WinIP-Package~31bf3856ad364e35~amd64~sl-SI~7.1.7601.16492.mum
servicing\packages\Win8IP-Microsoft-Windows-Graphics-Package~31bf3856ad364e35~amd64~sl-SI~7.1.7601.16492.mum
servicing\packages\Win8IP-Microsoft-Windows-Multimedia-Package~31bf3856ad364e35~amd64~sl-SI~7.1.7601.16492.mum
servicing\packages\Microsoft-Windows-UIAnimation-WinIP-Package~31bf3856ad364e35~amd64~sl-SI~7.1.7601.16492.cat
servicing\packages\Win8IP-Microsoft-Windows-Graphics-Package~31bf3856ad364e35~amd64~sl-SI~7.1.7601.16492.cat
servicing\packages\Win8IP-Microsoft-Windows-Multimedia-Package~31bf3856ad364e35~amd64~sl-SI~7.1.7601.16492.cat
SFC shows another couple...

Code:
Line 9824: 2014-09-09 20:25:45, Info CSI 0000035c [SR] Repairing 3 components
Line 9825: 2014-09-09 20:25:45, Info CSI 0000035d [SR] Beginning Verify and Repair transaction
Line 9830: 2014-09-09 20:25:45, Info CSI 00000360 [SR] Cannot verify component files for 305895c659d1ec256802c823f05edcf3, Version = 11.2.9600.17107, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, Pu... Read more

Read other 9 answers
RELEVANCY SCORE 92.8

Hi. having problems getting windows update to work. Tried one of the msu hotfix's but it didn't help. Not really looking forward to a reinstall.

A:800F081F Error Windows update installer x64

The CBS log is filled with error sequences like this...

Code:
Line 1490: 2015-03-28 10:45:25, Error CBS Exec: Failed to pre-stage package: WUClient-SelfUpdate-Core-AdmComp~31bf3856ad364e35~amd64~pt-PT~7.6.7600.320, file: wuaueng.dll.mui, source: \\?\C:\Windows\Servicing\Packages\amd64_microsoft-windows-w..ient-core.resources_31bf3856ad364e35_7.6.7600.256_zh-cn_8aefebe76d4c7c4f\wuaueng.dll.mui, sandbox: (null) [HRESULT = 0x800f081f - CBS_E_SOURCE_MISSING]
Line 1494: 2015-03-28 10:45:25, Error CBS Failed to pre- stage package: WUClient-SelfUpdate-Core-TopLevel~31bf3856ad364e35~amd64~~7.6.7600.320 [HRESULT = 0x800f081f - CBS_E_SOURCE_MISSING]
Line 1497: 2015-03-28 10:45:25, Error CBS Failed to process single phase execution. [HRESULT = 0x800f081f - CBS_E_SOURCE_MISSING]
Unfortunately, this type of error has proved almost impossible to solve in the past - by far the quickest solution is a repair install or the OS, if you have the proper media available.
See the tutorial here.
Repair Install

Read other 1 answers
RELEVANCY SCORE 91.6

Logs attached. Attempting to update Windows results in attempt to update Windows Update Installer, which fails with Code 80073712. Logs attached.

sfc /scannow reported no problems found.

Windows 7 SP1 Home Premium x64

Thanks in advance!

- Tim

A:Windows Update Installer Update failing - Code 80073712

CheckSUR shows the following...

Code:
Unavailable repair files:
winsxs\manifests\amd64_microsoft-windows-w..lient-aux.resources_31bf3856ad364e35_7.6.7600.320_en-us_d5981a6600d138cc.manifest
winsxs\manifests\amd64_microsoft-windows-w..owsupdateclient-aux_31bf3856ad364e35_7.6.7600.320_none_bc07877c65502903.manifest

I'll post a fix protocol soon.

Read other 9 answers
RELEVANCY SCORE 91.2

Hi, I have been trying to update my Windows OS for a few days now via the control panel and keep getting this same error and not exactly sure what it or how to resolve this. If any of you could help I'd be very grateful.
 
Thanks.

A:Problem Updating Windows - Error Code 80072EE2

This may work if updating is the only issue,if not youl need to troubleshoot further.
 
http://www.thewindowsclub.com/windows-updates-fail-to-install
 
Scrole down to item 6 and run the Fixwu tool.
 
Also have a look at
 
http://windows.microsoft.com/en-gb/windows/windows-update-error-80072ee2#1TC=windows-7
 
http://social.technet.microsoft.com/Forums/windows/en-US/11f7f7e5-a826-4e94-af6a-8f5db3206d22/windows-update-error-code-80072ee2?forum=w7itprosecurity

Read other 26 answers
RELEVANCY SCORE 90

This started happening over a week ago. I did try a repair using the Windows 7 Ultimate-64 bit DVD but the problem remains. When the option to search for updates is pressed a message comes up "Windows could not search for new updates" Error Code 800F080D.
Any help will be most appreciated.

A:Windows 7 update installer fails with error Code 800F080D

Please follow the Windows Update Posting Instructions and post the requested data
If the file is too large (8MB compressed), remove the older CBSPersist cab files until the final file is below the limit - you can always post them separately after zipping them. (the forum doesn't allow the upload of bare CAB files, for a number of reasons)

Read other 1 answers
RELEVANCY SCORE 89.6

No-one replied to this post and so the problem was never fixed.
(The updates continued to fail downloading or installing)
I upgraded to Windows 10 Home and thankfully didn't need to have the updates installed to upgrade.

Back in April this year I downloaded two important updates:

1) Security Update for Microsoft .NET Framework 4.5.1 and 4.5.2 on Windows 8.1 and Windows Server 2012 R2 x64-based Systems (KB3023222)

2) Security Update for Microsoft .NET Framework 4.5.1 and 4.5.2 on Windows 8.1 and Windows Server 2012 R2 x64-based Systems (KB3032663)

However during the installation I encountered Error Code: 80073712
I tryed the installation again without anything else open and still the same result
I tryed the installation again having restarted and still the same result
I tryed the installation again after running the DISM Tool and still the same result

Yesterday (17/7/15) I tryed to download another important update:

1) Security Update for Windows 8.1 for x64-based Systems (KB3004365)

However during the download I encountered Error Code: 800F081F
I tryed everything that I tryed previously and still the same result

I searched around and both of these error codes apparently mean that a file needed by Windows Update is either damaged or missing

I thought I might as-well start a thread about it on these forums as not being able to download/install security updates isn't a good thing

Please Reply!

Read other answers
RELEVANCY SCORE 88

I've been getting the 9C59 error for a while with the Windows automatic updater. I've attempted a manual update of IE 10, but had the same error. Not sure where to go from here.

I've attached the CBS file.

Thanks.

Dennis

A:IE 10 Update Failed - Windows 7 - Error Code 9C59

CheckSUR found and fixed a large number of errors - but there are still a couple of errors remaining, which it may be able to fix if you run the tool a second time. Please post (just) the new CheckSUR.log file afterwards.

There are a couple of errors in the CBS.log which may relate to the errors outstanding in the CheckSUR - so we need to get those fixed first, and only then see if it's affected the SFC/CBS results.

Read other 9 answers
RELEVANCY SCORE 88

hi ..., i need help regarding the windows update issue.
i'm using windows vista business sp2 running on lenovo thinkpad sl300.
i want to upgrade my harddrive since i need a bigger capacity. so, i try to move my data on old harddrive to a new one.
i'm already try to migrate my harddrive several ways:
1. i try to clone my harddrive with sector by sector copy
2. i try to use rescue and recovery (utilities from thinkvantage)
3. i try to use backup and restore center (windows complete pc backup)
all of them give me the result, everything works just fine, except i no longer can run windows update and all related to it, for example microsoft security essentials.
i already try to fix the windows update with microsoft fix it
http://support.microsoft.com/kb/971058/en-us with normal and  aggresive mode, none of them works.
can anyone help me on this?Regards, Ferry Huang

A:Windows Update Failed Error Code 0xc8000247

but when i register the dll, there are some error saying the dll is missing or not valid (something like that),
maybe some DLLs are damaged.

Please start the command prompt (cmd.exe) with admin rights [1] and run sfc [2]:

sfc.exe /scannow

Is it able to find and repair broken files (create the txt file shown under [2] and look if all files are restored)?


best regards
André

[1]
http://windows.microsoft.com/en-US/windows7/How-do-I-run-an-application-once-with-a-full-administrator-access-token

[2]
http://support.microsoft.com/kb/929833 "A programmer is just a tool which converts caffeine into code"

Want to install RSAT on Windows 7 Sp1? Check my HowTo: http://www.msfn.org/board/index.php?showtopic=150221

Read other 36 answers
RELEVANCY SCORE 88

I have been trying to update windows 7 for a few days now and i have been getting the same error message over and over again. I only have 1 important update left and like 10 optional updates. The important update is KB295664, and most of the optional ones are similar. I tried to repair network frame and nothing

A:Windows Failed to update,Error code 80070643

Please follow the Windows Update Posting Instructions and post the requested data

If the file is too large (8MB compressed), remove the older CBSPersist cab files until the final file is below the limit - you can always post them separately after zipping them. (the forum doesn't allow the upload of bare CAB files, for a number of reasons)

Please also post the C:\Windows\windowsudpate.log file

Read other 1 answers
RELEVANCY SCORE 88

hello
about a month I have a problem with the updates of windows 7 professional 32 bit. When I turn on the PC, Windows tries to install an update, it hangs at 35% and the pc restarts 3 times before using it.
after, if I click on search updates, I have error code 8000ffff. I tried microsoft fixit but I have not resolved.

this is the file of MGA. please help me.. I'm going crazy...



Code:
Diagnostic Report (1.9.0027.0):
-----------------------------------------
Windows Validation Data-->

Validation Code: 0
Cached Online Validation Code: 0x0
Windows Product Key: *****-*****-*****-*****-XFPHJ
Windows Product Key Hash: FjeWkdSWrMt3bkVKGJPOMAaHKUo=
Windows Product ID: 55041-089-9359655-86153
Windows Product ID Type: 6
Windows License Type: Volume MAK
Windows OS version: 6.1.7601.2.00010100.1.0.048
ID: {B95026A5-128F-4E02-8C35-F8020F3FBD27}(1)
Is Admin: Yes
TestCab: 0x0
LegitcheckControl ActiveX: N/A, hr = 0x80070002
Signed By: N/A, hr = 0x80070002
Product Name: Windows 7 Professional
Architecture: 0x00000000
Build lab: 7601.win7sp1_gdr.120830-0333
TTS Error:
Validation Diagnostic:
Resolution Status: N/A

Vista WgaER Data-->
ThreatID(s): N/A, hr = 0x80070002
Version: N/A, hr = 0x80070002

Windows XP Notifications Data-->
Cached Result: N/A, hr = 0x80070002
File Exists: No
Version: N/A, hr = 0x80070002
WgaTray.exe Signed By: N/A, hr = 0x80070002
WgaLogon.dll Signed By: N/A, hr = 0x80070002

OGA Notifications Data-->
Cac... Read more

A:Windows Update failed - code error 8000ffff

Open Regedit, - File - Export - save to desktop ( creates backup of your current registery

Then locate and remove:

HKEY_LOCAL_MACHINE\COMPONENTS\PendingXmlIdentifier
HKEY_LOCAL_MACHINE\COMPONENTS\NextQueueEntryIndex
HKEY_LOCAL_MACHINE\COMPONENTS\AdvancedInstallersNeedResolving
Reboot - then check for updates.

Source - Microsoft.

Read other 3 answers
RELEVANCY SCORE 88

Hi,

I have encountered error code 800F0900 with the recent Windows Update process. The followings are my screen shots and CBS logs for your perusal.

Thanks for taking time to solve my problem.

Regards.
STLai

A:Windows Update failed error code: 800F0900

Please follow the Windows Update Posting Instructions and post the requested data
If the file is too large (8MB compressed), remove the older CBSPersist cab files until the final file is below the limit - you can always post them separately after zipping them. (the forum doesn't allow the upload of bare CAB files, for a number of reasons)

Read other 9 answers
RELEVANCY SCORE 88

I recently did a clean install of Windows 7 Professional 64-bit on my Gateway LT40 Netbook computer (Atom N2600 CPU, 4 Gb memory, 2.99 Gb usable). Yes, I know this operating system is a stretch for this computer. Be that as it may, I'm determined to use it this way, and it seems to be performing well.

After several iterations, finally got all the Windows Updates installed successfully, except IE 11. I keep getting error code 9c59, both with Windows Update and standalone IE 11 installation.Attachment 337041

I have run the System Update Readiness Tool twice (ran to completion both times, no problems), and I ran sfc /scannow once (ran to completion, reported no problems).

As an aside, when I first installed Win 7 Pro 64-bit, IE came up as IE 8. I successfully ran standalone installs of IE 9 and IE 10. I have since uninstalled IE 9 and IE 10, so I'm back to IE 8.

I have attached CBS.zip and four CbsPersist.zip files. I have one more (most recent, unfortunately) CsPersist.zip file, but it is 9Mb and won't upload.
Attachment 337036

Attachment 337037

Attachment 337038

Attachment 337039

Attachment 337040

A:IE 11 Windows Update installation failed code 9c59

Your problem appears to be related to this error...

Code:
2014-10-16 15:26:37, Info CSI 00000028 Component change list:
2014-10-16 15:26:37, Info CSI 00000029 Couldn't find the hash of component: Microsoft-Windows-IE-IELowUtil, Version = 11.2.9600.17358, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the catalog [l:192{96}]"\SystemRoot\WinSxS\Catalogs\854a4fa1015dcfe133f699224ddaf8184bc76218d56440730bb5bcbf88d59ade.cat".
2014-10-16 15:26:37, Error CSI [email protected]/10/16:19:26:37.493 (F) d:\win7sp1_gdr\base\wcp\componentstore\csd_winners.cpp(1302): Error 80092004 [Warning,Facility=FACILITY_NTSSPI,Code=8196 (0x2004)] originated in function CCSDirectTransaction::AddImplicationsToCatalogsAndVerifyComponentHashes expression: (null)
[gle=0x80004005]

I need to have a look at your COMPONENTS registry hive

Please copy the C:\Windows\System32\config\COMPONENTS file (no extension) to your desktop and then compress it - upload the compressed file to your favoured fileshare site (preferably Dropbox or OneDrive) and post a link.

Read other 4 answers
RELEVANCY SCORE 88

Hoping someone can help me here. I have seen Noel DP post several resolutions but each seem custom to the errors the other user gets.

I ran SFC/Scannow with no errors. Ran Checksur and got errors.

Unavailable repair files:
servicing\packages\WUClient-SelfUpdate-Core-TopLevel~31bf3856ad364e35~x86~~7.6.7600.320.mum
servicing\packages\WUClient-SelfUpdate-Core-TopLevel~31bf3856ad364e35~x86~~7.6.7600.320.mum
servicing\packages\WUClient-SelfUpdate-Core-TopLevel~31bf3856ad364e35~x86~~7.6.7600.320.cat
servicing\packages\WUClient-SelfUpdate-Core-TopLevel~31bf3856ad364e35~x86~~7.6.7600.320.cat

CBS log and CheckSUR Log attached.

A:Windows Update failed error code: 800F0900

This sounds to me like you may have to try going in and deleting the windows update catalog files and re running windows update and see what happens. If that doesnt solve the issue post back and we can take it from there.

Read other 9 answers
RELEVANCY SCORE 88

Today Windows Update ran and failed with code 80070005. There was only one important update as seen below. I unsucessfully tried the following the fix the Windows update code 80070005 error:

1. Running the SubInAcl tool per KB968003. Windows Update still failed. Next I disable Norton Security and try again but Windows Update failed again.

2. Next I enable the Administrator account, switch user to Administrator and run Windows Update. This still failed. Next I disable Norton Security and try again but Windows Update failed again.

I have previously run Windows Update many times with no problems. What do I need to do to fix the issue?


Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 8.1, 64 bit
Processor: AMD A6-5200 APU with Radeon(TM) HD Graphics, AMD64 Family 22 Model 0 Stepping 1
Processor Count: 4
RAM: 7630 Mb
Graphics Card: AMD Radeon HD 8400, 512 Mb
Hard Drives: C: Total - 704831 MB, Free - 223025 MB;
Motherboard: TOSHIBA, Portable PC
Antivirus: Norton Security, Updated and Enabled
 

A:Solved: Windows update failed code 80070005

Looks like this is fixed now. Unsure of what actually fixed it. I restarted my computer and it seems like it is installing some updates, so I waited and when windows starts again, I ran Windows Update and it asked me to install another update which I did but Windows came back and said update not needed. Just to be sure, Windows Update is working, I checked for updates again and this time, there are no more updates. So the original problem is mo more there and thus fixed.
 

Read other 1 answers
RELEVANCY SCORE 88

I'm trying to install update KB2639308 but it keeps saying that it fails and gives me the error code WindowsUpdate_FFFFFFFE. I looked it up online and it says that it can't update because of malware. However, when I run Norton and do a full system scan it doesn't find anything. I also tried to fix it with the Windows Update Troubleshooter and that doesn't help either. Is there anything else I can do without having to fully reinstall Windows 7 like the info on the site says? Please help.

A:Failed Windows Update, error code WindowsUpdate_FFFFFFFE

Hi,

A pre-requisite for this update is having Service Pack 1 installed. Can you confirm that this is the case?

Also, which version of Norton are you running? Is it the very latest? I have found posts where running Microsoft's own MSE doesn't find any malware, yet the error this occurs, so lets try something totally different:

Please perform an online virus scan using ESET
ESET Online Scanner

Can you also please run this tool to allow us to diagnose any other conditions that might prevent this update installing:

http://go.microsoft.com/fwlink/?linkid=52012

1. Click the Continue button.
2. Click Copy button (ignore any error messages if they appear)
3. Paste the results here in your next reply

Regards,
Golden

Read other 4 answers
RELEVANCY SCORE 88

I recently did a factory restore to get rid of some malware and now for some reason updates aren't going through properly.
Everytime i shut down my computer i have 85 updates and they all fail except two.
But the error code is Code 80071A2D

Almost all the updates are Security updates.

A:Windows Failed update Error code 80071A2D

Please follow the Windows Update Posting Instructions and post the requested data
If the file is too large (8MB compressed), remove the older CBSPersist cab files until the final file is below the limit - you can always post them separately after zipping them. (the forum doesn't allow the upload of bare CBA files, for a number of reasons)

Read other 1 answers
RELEVANCY SCORE 88

Windows 7 Pro. i7 4790. MSI Gaming 7 board. Corsair SSD for booting Win7. Tried update. Tried SURT. Ran SFC scan with no errors. Crazy frustrated. Wondering if it has to do with the new fandangled msi boot stuff. Even went as far as to DL AVG tune up to see about repairing reg keys, that didn't seem to work either. Downloaded the latest MSI bios file, updated, still no go. Tried several windows "fix it" those didn't work either. Tried manually downloading and running the updated, that just said "failed" after running. I'm officially stuck. Please help.

"Security Update for Microsoft .NET Framework 3.5.1 on Windows 7 and Windows Server 2008 R2 SP1 for x64-based Systems (KB2973112)

Installation date: ‎12/‎25/‎2014 1:32 AM

Installation status: Failed

Error details: Code 800B0100"

I cannot upload my cbs zip file as it exceeds the file limit here. 7z files not accepted either. :-[

A:windows update kb2973112 failed code 800b0100

Screen Shots

Read other 9 answers
RELEVANCY SCORE 88

Hello,

Last week I did a clean install of Win 7. A few days later noticed Windows update had stopped working. I was unable to fix it so did a repair install of Windows.
Now all seems fine except I cannot update to IE 11. I get a 9c59 error and cant seem to fix this.
Windows Resource Protection did not find any integrity violations.

The log files are here: https://www.dropbox.com/s/5r2y7pthy5khtu0/CBS.rar?dl=0

Thanks

A:IE 11 Windows Update installation failed code 9c59

Hi and welcome to SevenForums,
Mag download,
Select all and copy and paste the report contents here,
http://go.microsoft.com/fwlink/?LinkID=52012

Read other 1 answers
RELEVANCY SCORE 88

Hello, My windows update keeps failing on the same 5 updates with the error code 8024200D , This is really annoying me, I have tried everything on the internet i could find and nothing has worked, Can anybody help?, Thank you,

Sean.

Windows 7 Professional 64bit:

Windows 7 Service Pack 1 for x64-based Systems (KB976932)

Update for Windows 7 for x64-based Systems (KB2763523)

Update for Windows 7 for x64-based Systems (KB2533552)

Security Update for Windows 7 for x64-based Systems (KB2864058)

Security Update for Windows 7 for x64-based Systems (KB2620704)

A:Windows Update Failed, error code - 8024200D

Bump

Read other 3 answers
RELEVANCY SCORE 87.2

 When trying to download updates for Vista Ultimate I get the error code 800f081f. I tried to trouble shoot the problem and try it again, but it doesn't work. What do I do to fix this code and get updates automaticaly?

Read other answers
RELEVANCY SCORE 87.2

hi every time i try to update my window 7 ..32bit SP1. IT GO TO 8% THEN give my error code 800f081f, can some one please help me. thanks for any help.

A:error code 800f081f

Hi and welcome to TSF try this How do I reset Windows Update components?

Read other 1 answers
RELEVANCY SCORE 87.2

Can you help me Guys..
cant update sp1.
error code. 800F081F
19% in download then I get this error.

A:sp1 error code 800F081F

  
Quote: Originally Posted by MYangelo


Can you help me Guys..
cant update sp1.
error code. 800F081F
19% in download then I get this error.


Check this out mate.

SP1 error's 800F081F & 800F0A13

Read other 3 answers
RELEVANCY SCORE 86.8

I have a HP mini 110-3000 and am trying to install the Windows 7 Service Pack 1 but every time I have tried to update, it comes up with error code 26. I have tried everything that I could think of and need assistance.

A:Windows 7 Service Pack failed to update, error code 26

Hello Krayola47, welcome to SevenForums!

Can you post the requested data please?

Windows Update Posting Instructions

Tom

Read other 1 answers
RELEVANCY SCORE 86.8

Tried running windows update KB2545698 and it failed due to error code 800B0100. Please help!

A:Update for Windows 7 (KB2545698) failed due to error code 800B0100

Please follow the Windows Update Posting Instructions and post the requested data
If the file is too large (8MB compressed), remove the older CBSPersist cab files until the final file is below the limit - you can always post them separately after zipping them. (the forum doesn't allow the upload of bare CAB files, for a number of reasons)

Read other 9 answers
RELEVANCY SCORE 86.8

I have run Bitdefender Antivirus scan with updated virus definitions.
I have run Malwarebytes with updated virus definitions.

I have run the System Update Readiness Tool. It ran to completion with no errors. It didn't create a file called CheckSur.log. I have searched the entire drive and I looked in:
C:\Windows\CheckSur\v1.0

I have run:
sfc /scannow

I have run a Win7 Update in place.
I have updated all MS updates except for IE11.

The Windows update error I am getting is:
Code 9C59

I have attached the CBS.log to this post.
I have run this BAT file to search for errors. Nothing showed.

Code:
findstr /c:"[SR]" %windir%\Logs\CBS\CBS.log >%userprofile%\Desktop\sfcdetails.txt
start Notepad %userprofile%\Desktop\sfcdetails.txt
DEL %windir%\Logs\CBS\CBS.log
cmd
I have run MicrosoftFixit.wu.Run.exe, Rebooted and tried Windows Update again.

I have run this bat file before the last Windows Update:

Code:
@echo on
msiexec /unregister
msiexec /regserver
net stop bits
net stop WuAuServ
net stop appidsvc
net stop cryptsvc
Del "%ALLUSERSPROFILE%\Application Data\Microsoft\Network\Downloader\qmgr*.dat"
Set i=1
:again
If exist "C:\WINDOWS\SoftwareDistribution.old_%i%" (
set /A i=i+1
goto again)
Set x=%i%
ren C:\WINDOWS\SoftwareDistribution SoftwareDistribution.old_%x%
Set i=1
:again2
If exist "%systemroot%\system32\catroot2 catroot2.old_%i%" (
set /A i=i+1
goto again2)
Set x=%i%
Ren %systemroot%\system32\catroot2 catroot2.ol... Read more

A:Windows update failed Code 9C59 installing IE11

Pleasefollow the WindowsUpdate Posting Instructions and post the requested data
If the file is too large (8MBcompressed), remove the older CBSPersist cab files until the final file isbelow the limit - you can always post them separately after zipping them. (theforum doesn't allow the upload of bare CAB files, for a number of reasons)

Read other 9 answers
RELEVANCY SCORE 86

I'm running Windows 7 x86_64 architecture, and I am trying to install Internet Explorer 10 via the Windows Update service (currently I have Internet Explorer 8 installed). This update is continually failing with a 9C59 error (screenshot attached). I have tried to update to Internet Explorer 10 manually via the .exe to install Internet Explorer 10 and it also fails (as does, IE 9).

I have also attached the C:\Windows\Logs\CBS directory as a .zip file. From this, it seems as though some repair files are missing, although I can't quite figure out where these are supposed to be, or from which package/update they should have been installed from.

Any help appreciated,
Jon

A:Windows Update failed to install Internet Explorer 10 - Code 9C59

The problem seems to be very deep-rooted.
There are C results in your files - but the CBS.log reveals the following error

Code:
Pin (3): flags: 0 tlc: [Microsoft-Windows-ImageBasedSetup-IE-Base-Deployment-Downlevel-LanguagePack, Version = 6.2.9200.16521, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture = [l:10{5}]"en-US", VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral]) ref: ( flgs: 00000000 guid: {d16d444c-56d8-11d5-882d-0080c847b195} name: [l:326{163}]"Microsoft-Windows-ImageBasedSetup-IE-Package-Base-Downlevel~31bf3856ad364e35~amd64~en-US~6.2.9200.16521.Microsoft-Windows-ImageBasedSetup-IE-Package-Base-Downlevel" ncdata: [l:0]"") thumbprint: [l:128{64}]"b691ff0ae0d6ef5035b67c9f9e97a062dc3a88fbf6e1a144209c26be94d5ccd2"
2013-08-09 18:59:20, Info CSI 00000024 Component change list:
2013-08-09 18:59:20, Info CSI 00000025 Couldn't find the hash of component: Microsoft-Windows-IE-IEShims, Version = 10.2.9200.16635, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the catalog [l:192{96}]"\SystemRoot\WinSxS\Catalogs\41f8d72a79f78879f1562ac60358fe1bb87d573fa345bf3a7a35765e101ce5ef.cat".
2013-08-09 18:59:20, Error CSI [email protected]/8/9:10:59:20.258 (F) d:\win7sp1_gdr\base\wc... Read more

Read other 4 answers
RELEVANCY SCORE 86

Hi when running windows update all the updates fail and give the error code 800706F7. I have retried 3 times all to the same result. i have searched for this error code and the only results i found was about removing a previous 2014 update but this was not on my computer. i have ran the System Update Readiness Tool which installed 1 update however i can still not download the other updates

A:windows update error code 800706F7 54 important updates failed

Tried again and am now also getting error codes 80246007 and 8007002

Read other 9 answers
RELEVANCY SCORE 86

Auto security update seems to have created error code C0000142 and saying unable to access (?) as well as volume on computer no longer works - now what folks?  Many thanks as always.

A:windows 7 home 64 bit dell PC update failed caused error code

Please download MiniToolBox  , save it to your desktop and run it.
 Checkmark the following checkboxes:  List last 10 Event Viewer log  List Installed Programs  List Users, Partitions and Memory size.
 Click Go and paste the content into your next post.
 Also...please Publish a Snapshot using Speccy - http://www.bleepingcomputer.com/forums/topic323892.html/page__p__1797792#entry1797792 , taking care to post the link of the snapshot in your next post. 
Louis

Read other 1 answers
RELEVANCY SCORE 85.6

Hello,
I am receiving the titled errors during windows update, I checked at windows support and tried every answer given there with no success.
in addition, i think that this might be the cause that BattleField 3 crashes all the time.

A:Windows Update errors Code 800B0100 and Code 8007065E, tried everythin

First, check that teh file system and disk are OK
type in the Search box
CMD.EXE
right-click on the only file that is found
Select Run as Administrator
- the Elevated Command Prompt window should pop up
At the Command prompt, type
CHKDSK C: /R
and hit the Enter key
You will be told that the drive is locked, and the CHKDSK will run at he next boot - hit the Y key, and then reboot. The chkdsk will take a few hours depending on the size of the drive, so be patient!

After the CHKDSK has run, Windows should boot normally (possibly after a second auto-reboot) - then run the SFC

SFC -System File Checker - Instructions
Click on the Start button
type in the Search box
CMD.EXE
right-click on the only file that is found
Select Run as Administrator
- the Elevated Command Prompt window should pop up
At the Command prompt, type

SFC /SCANNOW

and hit the Enter key
Wait for the scan to finish - make a note of any error messages - and then reboot.

You will have seen that the SFC command leaves a log - please upload the CBS.log and attach it to your response (You will probably have to copy it to the dektop first)

Read other 9 answers
RELEVANCY SCORE 85.2

Hi,
Windows updates are not getting installed in one of  the Windows 7 Enterprise Edtion 32 bit machine. Downloaded updates and tried to install also did not install. I have followed few methods and it did not help. please help to solve the issue. 
Uploaded the Windows Update log in the 
https://1drv.ms/f/s!Aj2wii50lHANhHXE907VrpSPvHyb

Method 1
Executed the below command as administrator 
net stop wuauserv
ren SoftwareDistribution  SoftwareDistribution.oldd
net start wuauserv
Wuauclt.exe /scannow
wuauclt.exe /resetauthorization
wuauclt.exe /updatenow
net start wuauserv
Method 2
Executed the below command as administrator 
sc config winmgmt start= disabled
net stop winmgmt /y
%systemdrive%
cd %windir%\system32\wbem
ren Repository Repository.old
sc config winmgmt start= auto
net start winmgmt







Regards, Boopathi

Read other answers
RELEVANCY SCORE 85.2

VS Code correctly announces update 1.24.1 is available. I click the Install Update button. Then I receive prompt to Restart Visual Studio Code to apply the latest update. After I restart VS Code, the update has not been applied, and I am again notified the
1.24.1 update is available. What gives here?
My VS Code identifiables:
Version 1.23.1
Commit d0182c3417d225529c6d5ad24b7572815d0de9ac
Date 2018-05-10T17:11:17.614Z
Shell 1.7.12
Renderer 58.0.3029.110
Node 7.9.0
Architecture x64

Thanks in adavance,
Sam Dawisha

Read other answers