Over 1 million tech questions and answers.

converting from metric to us imperial measurement system

Q: converting from metric to us imperial measurement system

I have both Windows XP and Office XP. Currently, I'm working on a Word document in which I need to set the margins all around to 1.5". My software, however, is only giving me measurements in cm.
I tried, following some advice, to go into my computer's control panel to regional settings, and then to the numbers tab. Unfortunately, my computer has no numbers tab. It only had a general, languages and advanced tab.

Any help would be appreciated.
Thank you.

Preferred Solution: converting from metric to us imperial measurement system

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: converting from metric to us imperial measurement system

Is there a customize button. Under that, there should be measurement system setting.

Read other 3 answers

Hi all,

I have 2 adapter, same model same speed. When I use "route print" command to check the table, they are the same metric.

I need to use the designated adapter to connect a server. How can I make sure this adapter is higher priority in the route table. 
Remark: This PC is not allow to set the route table. I have to use the automatic metric algorithm.

Read other answers


Lately, I've noticed all of my applications (Word, Photoshop, etc.) use the metric system of measurement. I'm not sure why this started, but I'd like it to go back to the imperial system. Do you know how I can change this default setting? Thanks!


A:Metric system!

I don't know about Photoshop, but in Word you can go to

Tools -> Options -> General tab and check that the measurement units are in inches

Entering "measurement" in Windows Help gained this information:

To change the way your computer displays numbers
Open Regional and Language Options in Control Panel.
On the Regional Options tab, under Standards and formats, click Customize.
On the Numbers tab, specify any changes you want to make.
Among items you can change are the decimal symbol and list separator, the format used for negative numbers and leading zeros, and the measurement system (U.S. or metric).


To open Regional and Language Options, click Start, click Control Panel, and then double-click Regional and Language Options.

Read other 2 answers

Hi I have a Imperial GL VE that I want to install my Radeon 9600 XT on but I can't find the company's website so I can download the driver. Any help you can give would be greatly appreciated.

A:Where to get AGP Driver for Imperial GL VE

Welome to TSG.(Not that I represent TSG or anything, I'm just some guy that would like to welcome you to TSG )

You can't find ATI's website?

The type of motherboard you have should have no bearing on video drivers, just download the Radeon driver package from ATI and you should be golden.

I'd start here.

Read other 1 answers

I use Adobe Acrobat Pro version 8 at work, which is fine. We use it for general mark up, measurement, so on, so forth. At home I have Acrobat Pro Version 9. I cant get 8, as we have no more licences for 8, and our wonderful IT department decided to buy licences for 9, as it MUST be better, without asking anyone.

Problem- If I measure in 9, I can set scale fine, but if I close the measurement for any reason, the scale defaults to default. This is annoying to say the least, when I have a lot of measuring to do in different areas. Anyone know how I can get this to set a scale and keep it? Its 2D measuring.


Read other answers

hi all
i need to find a trigem imperial motherboard ver 1.03 manual
imperial gl ve2002629
cant seem to find one any where
whant to see what i can do to it to make it perform better
can u help me

A:Trigem imperial motherboard ver 1.03 manual

Contact Trigem -


Read other 1 answers

Okay, this is random, but I try to install the game but it just closes the menu and nothing happens after I click on the "install" button, I have had this game installed before, but, it was so long ago I don't remember how I got it on there. I even have an image file and when you run that it does the same thing and there is nothing wrong with the disk, no scratches. I'd really appreciate help with this.

If you know anything about this problem and how to fix it can you please post a resolution or statement in this thread. I didn't post this in the Imperial Glory forum because it won't let me post for no reason.

A:Imperial Glory? Can't Install Game....

This menu comes up and wen I click "install Imperial Glory" nothing happens... it just closes.

Read other 3 answers


I recently switched from DSL to Charter Cable. Charter represents up to 3Mbps .

I went to toast and ran 10 tests over 1.5 minutes and came up with an average speed of 2629Kb. Toast

Is this acceptable?

One of my concerns is that I notice that I generally get a much slower speed when actually DL'ing. Often as low as 50Kb.

Is the slowness of that simply due to the server on the other end?

Thanks in advance!

A:Bandwidth Measurement Help

Can no one help me?

Read other 2 answers

I'm new to etehreal. I can capture and see packets along my network, but I cand find a way to find out what the avg bandwidth utilization is. In the past, I used Avg Bandwith Utilization, packet throughput, and top-talkers to analyze network performance. Is Etereal capable of performing these operations?

Read other answers

Hi, What is Red Sheriff Measurement, and what is it doing in my Java console?
It says at the bottom of the page....Report sent....Is this something I need to get rid of?

A:What is Red Sheriff Measurement???

I think it's legit. It counts the number of visitors to a certain webpage i believe.

Read other 1 answers

After many months of fine help from people on tsg forums, i have realised that this computer is clunking towards a halt and have ordered a new one from dell. The realisation that the average ipod has 10x the hard drive of my pc helped, but the local company offering broadband for less than my dial up means i am switching at the end of the month and want a fresh start.

The new machine will be a dell dimension 8400:
P4 530 (3.00GHz, 800fsb, 1MB cache)
1024MB Dual Channel DDR2 400MHz
160GB (7200rpm) Serial ATA Hard Drive with 8MB DataBurst cache
128 MB PCI Express x16 ATI Radeon X300 SE
48x/32x/48x/16x CDRW/DVD-ROM combo drive

I mainly use the desktop for work and pootling (my current word of the month: http://www.answers.com/pootle) about on the internet.
I do have a modest interest in games when i have the time though. I realise this machine is not for high end gaming, however i do not want to run the very latest games with all the graphics maxed out.

The only thing i am concerned about is the graphics card. I couldnt find many reviews googling the model although those i did find were not all together complimentary. Adding £250 to the price for a 256mb nvidia card seemed VERY pricey. To get to the point, would i be able to play rome:total war or imperial glory at a reasonable level with this system or would i need a new gfx card? If these are beynd its capabilities would something like battlefield 1942 run ok? I understand these are relatively new and system draining ... Read more

Read other answers

I need help finding what would replace a imperial GLVE motherboard for a emachines T2385 Please help

A:What would replace a trigen imperial GLVE motherboard?

you have an OEM system and there is no guarantee that its case conforms to industry standards and will fit a standard motherboard. but you can still try... what is the current configuration of your system?

Read other 3 answers

Data Measurement Chart hope this helps
Data Measurement Chart

A:Data Measurement Chart

That is useful as explanation in certain postings. Thanks.

Read other 3 answers

I am lucky enough to use Acrobat 8 at work mostly, but due to IT upgrades (it would be nice if they asked us what we wanted, just for once) I am using 9 more.
Problem is that I need to do a lot of measuring, both linear and area, and 9 will not keep the values I use. as an example, I bring up measure tool, do a few areas, then need to use a different tool, go back to measure and the scale has reset to 1:1. After the first 20 or 40 times it gets annoying. Acrobat 8 kept the scale as long as a document was open, is there any way to od this in 9? Tried the normal measure options, and have not managed to find it yet.
thanks :0

Read other answers

Trying to investigate Time to Ready from a standby (also called S3 time).

The question I have is why when you go from a Standby to Ready, the time it takes for the 1st and/or 2nd pass of this measurement (from when the power button is pressed till when the windows taskbar appears) is usually longer on the 1st & 2nd runs compared to the later runs. I know this involves paging data from the disc, which may need to be reread during those first few attempts. I am looking for any good documentation that explains this in detail. Would appreciate any pointers as to where to look.

Read other answers

This is a small but irritating problem with Word 2003.

In tools / options / general, I change the units to inches, and it is fine for a few times of usage, but every so often I open Word and it has reverted to centimeters. I'm baffled as to why it does this, but am probably missing something obvious.

Read other answers


My notebook is behaving oddly, and I suppose it is due to overheating.
In the past I had a small program that indicated if the fan was running (rpm) and the chips temperatures.
It even showed this on graphics, but I don't have it anymore.
Would you people recommend a good software to replace the old missing one?
Any help will be much appreciated.

A:Chip Temperature Measurement: Overheating?

What temperature do you want to measure? CPU or GPU? Try HWMonitor.

Read other 7 answers

Bonjour,,je me suis récemment acheter l'édition limité du Notebook Star wars et dans les documents de la boîte j'y retrouve le feuillet: About the content included with your HP special edition. Sur celui-ci il est indiqué que je suis sensé retrouvé un icone impérial sur mon bureau hors il n'y en a pas. L'appareil était le dernier en magasin et était donc en présentoir les vendeurs l'ont ''préparer'' avant de me le laisser ensuite. Je voudrais savoir comment retrouver cet icone car après tout j'ai choisi cet appareil pour ses fonctions spéciale. La corbeil n'est pas non plus en forme de Death Star comme elle devrait l'être... Merci beaucoup.

Read other answers

Hi all, I am new here so Hello and thank you for reading
I wanna get me a CM Storm Trooper case for part of a new project and I need to know the rear exhaust placement dimensions so I can prepare my desk area.
I have at the moment an Antec 300 and I drilled a 4" external filtered vent for the exhaust to draw cold air in from outside, The case at the mo is sat on a plinth on
the desktop and I have searched everywhere for a detailed plan of measurements for the Trooper but no avail.
I have attached a pic of the measurements I need if any Trooper users out there could verify please
Appreciate any help as I am eager to get this case ordered.
Thank you.
EDIT - I sorted it.

Read other answers

3D Scanning / wide range time of flight measurement

Hello everybody,

I am currently involved in a new technology that captures environments and creates 3D models thereof. In particular, the technology offers the following cool benefits:

- Captures large areas of up to 32x32ft (or 10x10m)
- Offers high precision of 0.03" (or 1mm)
- Detects motions in real-time with up to 1000fps (Response time: 1ms)
- Offers high resolution of 640x480 (VGA)
- Works independent of light (both bright and dark light conditions)
- Is resistent to interference due to HDDM (High Definition Distance Measurement)
- Is portable (0.8"x0.8")
- Consumes low power (50mW-500mW)
- Captures an angle of 180°; when combining two modules 360° would be possible.

Do you have any application fields in mind?
We would be highly interested in applications or problems with focus on a rather large group of users.

Thank you in advance for your support!

cheers, Thomas

Read other answers


I'm looking for an solution for an random issue on my clients computers (Windows 7 or 10).
They connected to an business vpn with Juniper network connect.
As usual, to be sure the computer use the vpn network to make dns reolution etc... the virtual network card created by juniper is using metric 1 to have the top priority.
That's working well since 1 or 2 years.
For an unknown reason When they connect to the vpn some computers keep the internet gateway instead of using the one provided by juniper vpn...
The solution we've found is to edit the juniper metric from 1 to 2 and after ipconfig /flushdns the route table is using the vpn gateway..the pb is, juniper create an virtual card each connections, so it is deleted when the users disconnect his vpn session.
I don't know why but the computers seems not update the route table when connecting to vpn..
We tried :
 - changing from ethernet to wireless or 3G/4G internet source
 - change the network card order in advanced parameters from the networking center..
 - route -f is not workingg

Do you have any idea..?

Read other answers

I've started a virtual machine which has two nics with qemu-kvm on server, one nic with qemu-kvm param "-redir tcp:40037::3389" is in "user" mode which IP is, so if I connect to, it will map to, the other is in bridge mode which IP is, my pc is, In the vm, "route print" shows two default gateway as below:    5    5
When I use my pc connect to, always cat not connect, so I change the metric value to 100 of, it works well.I am confusing. My question is:
I capture packet on nic, when connect, the src IP  is, src mac is the mac of, all these are right, but when reply, why it still select default gateway of I mean the dst is and there is a route
item like:            on-link    261
why doesn't it choose this one?
Or it doesn't find routing table at all when reply, just according to the receive interface? But if really this, why doesn't it work when metric value are the same? 
Or it doesn't find rou... Read more

Read other answers

Got a problem with Vlan's, I have created 2 different Vlan on Realtek or intel network card.
Work ok, virtual cards getting the correct IP address, but Windows 8 using DNS server from virtual network card  who has the lowers metric.
PC show takes DNS server setting from Vlan200 with metric 5 but instead, he using the DNS server from Vlan37 with metric 22.
Maybe someone know how can I fix this issue?
On Windows 10 don't have this problem.

Read other answers


Does anyone know whether Excel 2010's ruler units are in any way affected by/set by Window 7's Regional and Language, Measurement Settings?

A:Office7 Regional & Language\Measurement Setting & Excel2010 Ruler unit

Hi Heather

Your answer is likely to be in here:
Change the default date, time, number or measurement format - Support - Office.com

I just noticed that the link above does not include Windows 7 - sorry!

Perhaps this will help:
Change the display of dates, times, currency, and measurements

Read other 1 answers

Hello all

Let me say this is a nice community with a good lot of resources to get drunk on at times in need or when finding those spare moments to work brain cells

First I will inform you that I have scoured this forum and many many other resources as to my seemingly simple issue in which I must be missing some small detail to which has sidelined my progress.


I have external drives greater than 3+ TB in size with data I wish to keep. Because they were external and using their own firmware/controller, they were using MBR as you may know. I have since ripped them out and placed them in my rig for purposes of better speed and heat dissipation. Of course, windows will not show these drives in explorer alone. I have read up on using the mini tool PA in order to convert. Seems simple, but when doing so (selecting drive and then selecting/applying convert to GPT) and then even rebooting, there is no change, not showing in explorer. These drives were one disk, not partitioned previously or at all. What simple step am I missing here? I would appreciate a point in the right direction. Because of the reason of data, I have been apt to go ahead and "try" anything further before seeking any further help.

Let me itterate that this is not an issue of anything being corrupted by a power failure or otherwise. If I stick the drive back onto the external controller, while MBR, it appears and works, no problem (thats after i toggle back to MBR from GPT convert, of cou... Read more

A:Re-explanation, help, converting MBR to GPT (non system)

Your current systems disk (windows disk) is MBR ???

Disk 4 MBR - shows unformatted and unallocated space..

With all disks install inside PC open a command prompt(admin)

Type> diskpart
type> list disk
type> list volume

post a pic of cmd window

Read other 10 answers

Hey guys,
I am using a 3G modem (Virgin Mobile MC760). In short; I have 2 connections; 1 is wired ethernet and the other is this 3G modem. I want to be able to use the 3G modem in a guest Vmware system while still using my regular ethernet for everything else in the host. (Unfortunately this modem doesn't work in VM so I am stuck having 2 internet connections in Win7 and trying to route this).

I have read up on metric values but heres the problem. I set the ethernet for a metric value of 1 and the 3g connection as 9999, ethernet alone works fine, as soon as I connect the 3g modem it takes priority and changes my metric value of the ethernet higher and creates a default gateway, when my ethernet is The only way around this is if I disconnect my ethernet and reconnect it, it will then take priority and have both be connected and use ethernet.

Is there any solution to this?

A:Using 3G Modem, it changes metric value and default gateway, help?

Quote: Originally Posted by petya124

Hey guys,
I am using a 3G modem (Virgin Mobile MC760). In short; I have 2 connections; 1 is wired ethernet and the other is this 3G modem. I want to be able to use the 3G modem in a guest Vmware system while still using my regular ethernet for everything else in the host. (Unfortunately this modem doesn't work in VM so I am stuck having 2 internet connections in Win7 and trying to route this).

I have read up on metric values but heres the problem. I set the ethernet for a metric value of 1 and the 3g connection as 9999, ethernet alone works fine, as soon as I connect the 3g modem it takes priority and changes my metric value of the ethernet higher and creates a default gateway, when my ethernet is The only way around this is if I disconnect my ethernet and reconnect it, it will then take priority and have both be connected and use ethernet.

Is there any solution to this?

Dont think so. I have a virgin 3g modem and the coding is built into the firmware in the dongle.

Read other 4 answers

I got an iMC alert: Trap of Source: rt0012g.sdd.hp.com( "San Diego R&D"Contact: [email protected] Name: Level-2 Threshold Alarm of Application ManagementSeverity: CriticalTrap Time: 2016-11-30 13:17:00Description: Application monitor (Linux_15.80.33.131) File System(/home/impts)File System Usage Ratio is in level-2 threshold range: 95.0%, and current value is 402.87%; application type is (Linux). What did value 402.87% mean? Why it was over 100%? Thanks,

Read other answers

I changed my OS to Windows 8.1 64bit. my fingerprint scanning software(simple pass identity) not working and my webcam also not working. i have downloaded and installed drivers&softwares from http://support.hp.com/us-en/drivers/selfservice/HP-ENVY-m6-Notebook-PC-series/5296045/model/5305648 ,but still its not working. Regards

Read other answers

I got an iMC alert: Trap of Source: rt0012g.sdd.hp.com( "San Diego R&D"Contact: [email protected] Name: Level-2 Threshold Alarm of Application ManagementSeverity: CriticalTrap Time: 2016-11-30 13:17:00Description: Application monitor (Linux_15.80.33.131) File System(/home/impts)File System Usage Ratio is in level-2 threshold range: 95.0%, and current value is 402.87%; application type is (Linux). What did value 402.87% mean? Why it was over 100%? Thanks,

Read other answers

I looked forward to opening 'publisher' for the first time to see if I could produce an item to fit into a magazine/newspaper. I made my initial box-size and then discovered that IT'S ALL IN IMPERIAL! Considering that most of the people in the world use Metric and don't mess up our engineering and space stations by making stuff in imperial, why would Microsoft imagine that imperial works here. We went Metric in '71... Put it in Metric and let the yanks find the box marked 'Imperial'...
Anyhoo, I'm looking for the box to tick to choose to have the scales in Metric please, as I can't find it simply. Please may someone tell me...?

A:Changing scales to metric? (Publisher, PPT, etc...)

The horizontal and vertical rulers in Microsoft Publisher 2007 can be changed to display a different type of measurement unit. By default, the rulers in Publisher display inches, but you can change them to a variety of other measurement units.
For microsoft Publisher 2007.


1 Once you're in your document, choose the "Tools" menu, and click "Options" to open the "Options" dialog box.2 Select the "General" tab at the top of the "Options" dialog box, if necessary, to display the basic settings for Microsoft Publisher.3 Click the arrow to display the "Measurement units" drop-down list from the "Options" dialog box. These are the different types of measurements you can display on the Publisher rulers. Choose the measurement you want from choices that include inches, centimeters, picas, points or pixels.4 Click the "OK" button to close the "Options" dialog box and return to your Publisher document. Your rulers will display with the measurement you picked. Use the same process to switch back to the original measurement or to choose a new unit of measurement.

Read other 2 answers

I have had windows 7 for a few weeks and every time the PC is rebooted the Metric for both the Lan (172.17) and Wifi(192.169)goes back to 20, the Lan is set to Automatic and the wifi is set to 10, has anybody seen this problem before?

Active Routes:
Network Destination Netmask Gateway Interface Metric 20 20


A:problem with windows 7 not using correct metric

Sounds quite bizzare, Windows assigns a lower metric to the gateway it can communicate the fastest with, but in this case both have been assigned 20.
If you've manually assigned a gateway and metric you should see that in the list of persistent routes.

I wonder if your issue is similar to that in http://www.sevenforums.com/network-sharing/47280-how-configure-multiple-gateways.html

I'm stumped and have emailed MS as it works as expected in Win XP

Read other 5 answers

My computer turned itself off, but not normally. It was an abrupt shutdown, as if the power was cut.

I was downloading files, converting audio m4a - mp3 from my C drive to D drive, surfing, and listening to music.

The processor was at 100% on all cores.

Tj Max is 70*c the temps were at 73. I was about to close some programs but wasn't able to in time.

I'm using the same system now and everything seems fine.

How much damage could have been done b/c of this?

AMD Phenom II X4 965
500GB Hitachi 7200 rpm SATA III
500GB WD 7200 rpm SATA II

A:System shutdown while converting audio

Hi jago86.
Probably no damage this time if the system has booted OK. Check out the heatsink on the CPU for dust which may be compromising the cooling. If the temps are still high nearly causing thermal shut down it may be time for an after market cooler to keep those temps below 50C to give you some headroom.
I am typing this on a PC with an AMD CPU and the CPU is at 32C idling. I would recommend as you are in a warm climate a Cooler Master EVO 212 Newegg.com - COOLER MASTER Hyper 212 EVO RR-212E-20PK-R2 Continuous Direct Contact 120mm Sleeve CPU Cooler Compatible with latest Intel 2011/1366/1155 and AMD FM1/FM2/AM3+
You should check you have good case fans too.

Read other 2 answers

Currently partition D: is set as the primary parition and is attributed as System.

Parition C: used to be primary and is attributed as Boot.
Additional Info:
OS - Win XP Home Edition

As far as I'm concerned, I didn't convert anything; at least not intentionally.

I have a couple of questions regarding this matter:
1 - Does the pc boot from D: or C: with the current settings?

2 - I'd like to change the primary partition back to C:, will that attribute it back as System?

3 - Assuming conversion, will partition C: still be attributed as Boot and will the PC still load from it?

4 - Why/How could this have happened in the first place?

I attached a print screen for anyone who needs a clearer picture of this unpleasant condition.

Thanks in advance


A:Converting Paritions [C: (Boot) and D: (System)]

C: drive is part of an Extended Partition noted by a Dark Green Border. There is no easy way to set this back the way it was. How this happened I can't tell you. I would backup all the files you want to keep to a USB HDD. the best thing to do, would be to delete both partitions, leave the PQService Partitioin and reboot the computer and Run the System Recovery from that partition. By pressing Alt and F10 at the same time at bootup. And restore the computer to Factory Settings. Acer System Recovery Partition Hotkey & Instructions (eRecovery)
You can also try to use a third party utility like Easeus Magic Partition Manager, and convert the Extended Partition to a Primary Partition. And then run do the Factory Restore.

Read other 2 answers

I can no longer convert ANY video file type (AVI, MPG) and burn a DVD from it. When I try, one of three things typically happens;
1) The program gives an error message like 'Instruction at "0x004647..." referenced memory at "0x0766.....". The memory could not be "read"'. Microsoft recommends updating to the latest service pack. I'm running Win2000 service pk.4, all updated.
2) Strangely programs not only stop, but also stop running AND close by themselves. I've run antivirus and anti-spyware programs... no fix.
3) Most often the computer just freezes badly; often the motherboard reset button doesn't even do the job and I have to power off completely.

These problems happen with a number of software packages including Cucusoft AVI Converter Pro, 1st Video Converter, NeroVision Express, AVI to DVD Converter (actual name) and others.

I even reinstalled Windows 2000.... still no fix.

I recently installed a new motherboard, CPU and memory and I suspect one or more to the culprit. I've tested the memory, it's ok. The system also passes all tests using cpu utilities (CPU Burn-IN & CPU Stability Test)

I'm freakin' out here!! Does anyone have any experience with this? A verified solution would be greatly appreciated.


A:System freezes converting file to DVD

My PC keeps rebooting after 5 minutes of converitng an Avi file to the Dvd format. I have tried WinAvi, Cucusoft, dvdSanta, and VSO Divxtodvd converters. I can see the converter doing it's job via the preview window and after about 5 minutes and with no warning, the computer shuts off and reboots.
I am running Windows XP professional on my PC. Shutting down all applications including antivirus programs does not help. The event viewer does not log in any errors! No idea what's causing this problem.
Any help in resolving this issue is deeply appreciated.

Read other 1 answers

I need to mount a 500 GB 2.5" hard drive in a HP Prodesk 600 G1 SFF and I do not have any additional M3 metric isolation mounting guide screws.  The service manual states that these can be ordered fro HP.  Does anyone know where on HP's site these can be found?

A:M3 metric isolation mounting guide screws

?Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).If you are unfamiliar with the Forum's private messaging please click here to learn more.Thank you,Omar

Read other 3 answers

Does anyone have a part number or know where the following can be ordered from:M3 metric guide screws for 5.25-inch drives These are a special screw used in the HP EliteDesk tower drives, but are not included. 

Read other answers

How to convert a NTFS file system to FAT32

A:converting NTFS file system to FAT32

Read other 16 answers

Living in France you cannot avoid a French keyboard, they're everywhere. So I learned using the azerty, but stuck to English.

This is of course beyond the people designing Windows.

So how can I have Windows 8 speaking English, but using French options for the rest (?, keyboard, date format, metric)?

And of course, ALSO WITH METRO please. It seems independent of the "real" OS.

Thanks in advance

A:French Keyboard, €, metric and date with English speak W8

A lot of these changes can be made through the Control Panel > Clock, Language and Region
If it affects Metro, I do not know.

Read other 1 answers

When ever I go to log on to my Dell Latitude E7440 with windows 7 Professional x64 I get an error screen saying that windows could not find a bio metric device. This is true because my computer does not have a fingerprint reader on it. I was wondering if anyone could help me so i don't have to sit through my computer looking for the device and not finding it every time I go to log in. TIA

A:How to Disable Search for Bio metric Device on Windows 7 Start up?

Hi Welcome to Seven Forums .. Strange issue you seem to have ...

Reading the System Specs for your Laptop from the Link below ..

Seems some Models do have the Fingerprint Reader ...

Could it be some Software you have Installed from the Dell Website ..

That is causing this message ? ...

Dell Latitude E7440 User Review

Read other 1 answers

The company I work for has recently gotten a new Internet connection at their farm across the street. Originally the time clock was placed there and monitored over the LAN on the computer that I am at right now. Now that there is a new connection I need to know how to connect the time clock on the other internet connection to this PC. Networking has never been my strong suit. any help would be appreciated!


P.S. The time Clock is an anviz EP300 and the PC is running windows 8.1

A:Solved: Connect Bio-metric time clock to another network?

Hi Bumbers, and welcome to TSG.

Does the new connection at the other building have at least one static public IP address? If not, things may get a bit more complicated.

Beyond that, you will need to set up whatever modems and routers are being used across the street to port forward from the Internet public IP address to the private IP address of the time clock on the LAN. Having the time clock use a static IP address on the LAN, rather than get its IP address via DHCP would also simplify things.

It appeared to me that only registered users on the Anviz web site can download product manuals. I have no idea if or how the time clock can be properly configured to use a static IP address, the port numbers used, or the type of security it offers. Once you have port forwarding configured, the time clock will be exposed to attacks from the Internet.

After you have everything configured at the other location, you should be able to use the public IP address of the other location to access the clock from your location.

Read other 3 answers

How can I manage the option of convert the metric degrees in Weather app in metro screen. In Cuba when i live the wheather messure is in celcius degrees. Thank you

A:Convert the metric degrees in Weather app on metro screen

Hello Kbayin, 1st open the weather app then select settings tab from the start button in the lower left corner. On the right hand side select weather preferences then Celsius or Fahrenheit for temperature.

Read other 3 answers

Hi, I'm new to this forum, and hope to solve my problem with some expert guidance.

The problems started with me trying to create a shared file in onenote, which could be edited and viewed by all users of my computer. In the UAC, it asked me about some permission about "INTERACTIVE" and "SERVICE", if I remember right. I allowed it to do so, and hoped to set up the notebook in the public documents folder.

But, since then, the libraries (Documents, music, etc) reported being "Unresponsive" when I clicked on "Includes: 2 locations".

Also, the "See more results" link in the start menu reports an error as in the picture:

I recently installed Autocad Architecture Metric (US) in my computer, and then tried opening it in Guest account, but it just shows the following:


Then it shows:

And then it disappears, and nothing happens. I'm unable to open the software even when I applied read&exec permissions for guest in the folder containing the program. Path: C:\Program Files\Autodesk\AutoCAD Architecture 2011 (The folder containing the program)... (acad.exe)

All the other apps like chrome, pdf, etc are running without any problem, as this problem arose after their installation.

Also, please tell me why this app runs in guest account only if I select "Run as administrator". Other standard accounts are fine. Thanks!

A:Can't install Autocad Architecture Metric (US) in Guest account

why dont you try using the administrator account

Read other 3 answers

Hi hope you can help me?

I have had this computer for 3 years now and had no problems with it until just lately, it is Windows XP SP2, I have Nero and ConvertX2DVD installed on my computer and use these on a regular basis, but for the last couple of weeks once the converting process starts on these programmes the computer crashes, the screen stays on but the mouse cursor is stuck in the same position and i have to mannually restart the computer by pressing the on switch in for a few seconds. Once the system restarts everything works fine until i try to use the vide converting software. I have uninstalled the Programms and reinstalled to see it this would help me to no avail, i have ran registry cleaning software to no avail and regulary scan my computer for viruses using McAfee and this is always up to date.

I have tried everything i know and have not found the answer please somebody help.

Thanks in advance.

A:System Crashing when using Convertxtodvd or other video converting software.

Hello Borofett, Welcome to TSF!

Could you please post back with your full system specs, so that we can determine if this is a Hardware issue.

Kind Regards

Read other 4 answers

New girl here so please be patient ... merci .

Last night while converting a large avi file to DVD using ConvertXtoDVd .. I had a BSOD . ! First ever .

I have included the dmp file and also the full system info zip Seven forums requested.

Hope you can help identify the culprit ,
Many thanks
Danielle .

A:BSOD Converting avi file . Dmp and full system zip included .

Hello and welcome Danielle now did you use these for sending the dump files? if not please do because I cannt open the RAR stuff and the other has no BSOD dumps in it
Dump Files - Configure Windows to Create on BSOD
Blue Screen of Death (BSOD) Posting Instructions

Read other 9 answers