Over 1 million tech questions and answers.

Belkin wireless router problems

Q: Belkin wireless router problems

I have a Belkin n+ f5d8235-4 v2 and I have reset the router and then I had to manually reconfigure everything and I may have messed something up. The router has two blinking amber lights: the modem and internet lights.
-I began with my modem booted up, then I booted up my router while my modem and router were connected via yellow ethernet cable and another cable from my router to computer.
-First, I set up a new password
-Next, I went to Connection Type and set up - Dynamic, then entered my ISP host name and clicked apply.
-Next, I went to MAC address cloning, and just clicked apply as the boxes were already filled with characters.
-Next, I went to Channel and SSID and left everything the same except I changed my SSID name and took off the box marked broadcast SSID then clicked apply . The wireless channel was set to auto and current channel was 11 and extension channel was set to auto.
Next, I went to Security, Security Type: WPA-PSK, Authentication: WPA-PSK + WPA2-PSK and entered a new PSK and clicked obscure PSK then apply
Next, I went to Guest Access and enabled radio, created ssid name, Security: WPA/WPA2 PSK, Authentication: WPA-PSK + WPA2-PSK then entered the same PSK as before and clicked obscure PSK then apply.
For some reason, when I go back to both of the previous two screens, the new password I created does not show up, only my old one but when I type the new password into my wifi network, it connects.
This is as far as I have been and I'm not really sure what to do now. My internet connection from my modem is fine and I've updated the firmware on my router.

Read other answers
RELEVANCY SCORE 200
Preferred Solution: Belkin wireless router problems

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

RELEVANCY SCORE 79.6

1.) My friend told me that i should put a password on my wireless router.

I have a belkin "2.4GHz - 802.11g Wireless" Model # -f5d7230-4
-------------------------------------------------------------------
2.) When i go Start> All Programs > Belkin > Belkin Wireless utility
i get this error message

How do i fix this?
-------------------------------------------
Just incase...
 

A:Belkin Wireless Router problems

Read other 8 answers
RELEVANCY SCORE 79.6

Hi everyone. My router is a Belkin N Wireless Router model number F5D8233-4-v1(01A). It's upgraded to the latest firmware. My problem occurs when I put my PS3 in the DMZ, it cuts off internet access to all the other computers on the network. Can anyone help me? Thanks.
 

A:DMZ Problems for Belkin N Wireless Router

Read other 6 answers
RELEVANCY SCORE 79.6

Hi guys,
I have a brand new Belkin N+ router. It was working fine from last 10 months. But recently , say from last 20 days happening a issue with the wireless router. the internet will work for few hours properly, suddenly Internet will cut off or wireless router hanged up for a few seconds. the led for internet will either go off or go orange. Sometimes even the modem led will turn off or go orange. It takes about 10 seconds then its back on or else I need to restart the router. After restarting the router, the Internet will work fine.

Any suggestions on what the problem could be?

Much appreciated.

--
Thiyagarajan
 

A:Belkin n+ wireless router problems

If the modem is losing the connection, I'd start there. Make sure the connections to the modem and router are secure, make sure you have good power (a UPS is a good idea here).

Another thing that you can do is update the firmware to the latest available and then reset to factory defaults and reconfigure. You wouldn't happen to be using P2P applications now, would you? Those will drive many routers up the wall.
 

Read other 1 answers
RELEVANCY SCORE 79.6

well im not sure what happend with my belkin wireless router just yesterday afternoon it was working fine but like around like 11:00pm i just stopped working and now the modem light on the router just keeps blinking and at first i though it was the modem so i went to exchange it for a new one and it is still doing the same thing so now the only way that it will work is if i just use the modem by its self wich is ok for when i just use the computer but i cant sign in to xbox live so can anyone tell me what happend to the router or let me know if i need a new one
 

Read other answers
RELEVANCY SCORE 79.6

Belkin G wireless router 2.4ghz-802.11g
Dell Wireless 1390 WLAN mini-card

I am having an odd problem with the wireless capability of my wireless router. When I first got my router I used the Software included but that did not work so I set up my network manually. For several months everything was working perfectly and both physical and wireless connections to the router were working. Recently the wireless capability of the router has stopped working, however it still emits a strong signal and functions perfectly as a non-wireless router.

The problem my laptop encounter when it is try to connect is that the connection status constantly displays "Authenticating". I have tried to rebuild the network, no effect. Have clicked on the repair button, it sits indefinilty on the step "renewing IP address". I have tried physically entering my IP address, no effect. I am positive the problem is not my laptop wireless card because it still fuctions perfectly on all other networks.

Is this a networking problem or is it just time to get a new router?
 

A:Solved: Belkin G Wireless Router, Wireless Problems

Reset the router to factory default settings and reconfigure. Initially try to connect wirelessly with encryption disabled.
 

Read other 3 answers
RELEVANCY SCORE 78.8

Ok, as the topic suggests, I currently have a 4 port wireless Belkin router and also a 5 port hub. The setup is like this, Cable Modem --rj45--> Belkin Router --rj45--> 5 port hub. There is usually one laptop using the wireless connection while most of the computers are connected to the hub via rj45. Our setup is like this because the modem/router is upstairs and then the hub is in the basement where most of our computers are.

So the problem is when we're using the router, it lags like hell. I did a test, I connected the hub directly to the cable modem. The expected and normal pings (10-30) came back. I was wondering if we might have a virus over the wireless network, or if someone might be leeching off of our wireless service.

Basically, I wanted to know if I could get the instructions to listing all the IP's/users connected to the router, especially wireless connections. Secondly, I learned somewhere to clean a network I'd have to connect each infected PC separately to the modem and clean that system of infections, and then connect each clean systems back onto the network. Is that right?

Much help is appreciated, thanks!
 

A:Leeching/problems with wireless Belkin router?

If someone is leaching your connection, they will probably show up in the DHCP table on the router. If they have a static IP then they may not.

Both my routers show me the mac addresses of machines that have connected to the router.

I would enable either WEP or WPA-PSK on your router... that should preven others from using your broadband.
 

Read other 3 answers
RELEVANCY SCORE 78.8

hi guys im new to the site and i have some questions for the support team hopefully you guys can give me some answers (take it ez on me)

I use my linksys compact wireless-g usb for internet

OK , i am using Internet Connection Sharing with my PC to Playstation 2 the ICS works fine i have internet on my computer and PS2 (im online with madden 08) then after about 7 mins i lose internet to both my PS2 and PC

Now i can fix this problem when i unplug ,,,then plug my belkin router and the ICS is back on, then 7 mins later the same the it goes off.

i have my firewall completely off, and im not using ports cause i dont know how to use them, i have tried going to my routers page 192.168.0.2 but nothing happens

this is getting annoying it takes at least 40 mins to complete a madden game. Someone plz help me
 

A:Problems with Belkin wireless router f5d7230-4

Read other 16 answers
RELEVANCY SCORE 78.8

hi has anyone had this problem and if yes how to fix I have brand new router set it up connected 2 laptops was working fine for 4 days switched laptop on today no internet connection checked connections the router had switched from plusnet home network to bt wifi with FON public unsecured network. how did this happen and how to stop it happening again.I unplugged to router from power for 1 min pluggeg back in it re set back to plusnet home network secured wpa2. all help welcome thanks.

A:Belkin N wireless Modem router problems

well check and make sure your network security settings are all right and in place. Also, check the wireless settings on the laptop and make sure it is always set to connect your "home" network or wherever the network may be located. You might try resetting the settings to default also and try connecting everything again. Keep in mind you will probably have to re-enter any custom settings such as network name, passphrase for the network and also set up the proper security settings. I cant help you with the security settings however as i do not know how the belkin routers are set up.Post back here if needed.

Read other 1 answers
RELEVANCY SCORE 78

I have a vista x64 pc and and belkin g router model F5D7230-4 and i just got a gigabyte GN-WP01GS wireless card. It picks up the network excellent but when it trys to connect it some times says succesfull or unsuccessfull. When it says it succeds it stil doesnt connect to the router b/c i cant go to the routers options or other pc's. I've disabled firewalls. Im thinking the wireless card might not be compatible with the router but that is the last thing i want to hear. If you need more info just let me know. Thanks.

A:problems connecting wireless desktop pc to belkin g router

Hi,lamborn5
welcome to vist forums.
your belkin router is in 54g or 802.11g? is router equiped with MIMO?
you PC desktop or laptop?
most likly whats wrong is the area your computer is in.
eg:your router upstairs and your pc downstairs router have issues traveling vertical. Also this wireless card is it a BELKIN product? if not you may want to exchange it for a belkin product.the other options are to have a look at BELKIN USB wireless adabters which sit on your desk. and they recive much stronger signal.
check out Belkin : Home
this link will also explain what maybe wrong as you may have the wrong type of hardware for your home/office
http://www.belkin.com/flash/networking/

BELKIN also offer 24/7 tech service on
1 800 2BELKIN

thanks
skript kiddie.

Read other 1 answers
RELEVANCY SCORE 77.2

Okay I'm trying to connect my Trendnet TEW-430APB access point to my Belkin wireless router with cable broadband. So I can use the access point with my ps3. So far I set up the access point as "AP-Client" and entered the WEP encryption. Okay so I hook up the access point to my PS3 and it connects to the internet/PSN but then after a few minutes it starts saying "the attempt to obtain an IP address timed out".And each time the access point reconnects it reassigns a new IP and I get the same error a few minutes later. So I went into the PS3 connection settings and turned off dhcp and entered in IP manually. Kept DNS 1 as the router IP and DNS 2 blank. So now it stays in for 30 minutes or more but then another error comes up. Which says "DNS error" and when I go to test the connection I get"IP address timed out".

So its obviously able to connect to the wireless router and the WEP key is correct. So what do you think it can be? Do you think it could be the access point is going bad? What causes an access point to go in and out when all settings are correct?Also i had to assign the access point a static IP to access the settings of the access point on my computer.
 

A:Coonection problems connecting to Belkin G+ mimo wireless router.

Read other 13 answers
RELEVANCY SCORE 74.8

I recently bought a Nintendo DS for online gaming, and so when I couldn't get it online (Error code 52100, Nintendo's site not helping) I tried everything. Last week, I typed my own IP into IE and got my router page, then seen "Turn into Access Point" or something meaning change, and then it asked me to type a ???.???.???.??? style number into the IP box on that page. So I did and then it came up loading in top right hand corner. I waited and nothing so I F5'd it, then I lost my connection.

Then for a week I could only get internet (Wired) on my Xbox and neither Wireless nor Wired on anything else. But a few days ago, I read the customer support (MS, the one preloaded on the computers) and it said something about changing your IP settings, so I followed those steps and found my computer only wanted to use the DNS ___.___.___.___ the underscores being blanks. So I made it revert to what it should be with a reset button or whatever it was and now I get my Wired connection back on my Laptop.

But still when I hooked everything back up, no internet or network light on my wireless router.

Sorry for blabbing, but I really need it and after also recently buying an iPod Touch, really would like my Wi-Fi back.

Thanks,
Jameseh
 

A:Belkin N1 Wireless Router & Scientific Atlanta (Virgin/Telewest) Cable Modem problems

Please supply the following info, exact make and models of the equipment please.

Name of your ISP (Internet Service Provider).
Make and exact model of the broadband modem.
Make and exact model and hardware version of the router (if a separate unit).
Model numbers can usually be obtained from the label on the device.
Connection type, wired or wireless.
If wireless, encryption used, (none, WEP, WPA, or WPA2)
Version and patch level of Windows on all affected machines, i.e. XP (Home or Pro), SP1-SP2-SP3, Vista (Home, Business, Ultimate), etc.
The Internet Browser in use, IE, Firefox, Opera, etc.


Please give an exact description of your problem symptoms, including the exact text of any error messages.


If you're using a wireless connection, have you tried a direct connection with a cable to see if that changes the symptoms?
For wireless issues, have you disabled all encryption on the router to see if you can connect that way?
Have you connected directly to the broadband modem to see if this is a router or modem/ISP issue?
If there are other computers on the same network, are they experiencing the same issue, or do they function normally?


On any affected computer, I'd also like to see this:

Hold the Windows key and press R, then type CMD (COMMAND for W98/WME) to open a command prompt:

Type the following commands on separate lines, following each one with the Enter key:

PING 206.190.60.37

PING yahoo.com

NBTSTAT -n

IPCONFIG /ALL

Right click in the comm... Read more

Read other 3 answers
RELEVANCY SCORE 69.6

Hi friends ...

I hav bsnl broadband connection in my home.... I connected a tplink wired for browsing...

I also have a belkin wireless router..... I connected those routers.... And only wired communication is possible
and i cant access in wireless connection... Pls help me

i m sttuggling....
 

A:How to connect tp-link adsl router with belkin wireless router???

Read other 9 answers
RELEVANCY SCORE 69.2

I have a belkin wireless/wired router, and it's really starting to stress me out. I have the wireless part working just fine, all my wireless computers connect to each other/the internet just fine. BUT, my wired computer is not connecting to the internet at all, but the DHCP is still assigning it an IP address and the computer thinks everything is fine. When I click on Internet Explorer, it says that the page cannot be displayed. It's driving me mad, can anyone help?
 

A:Belkin Router, Wireless and Wired... Wired Problems...

Read other 6 answers
RELEVANCY SCORE 69.2

My network needs to connect to 6 wired PCs and 1 wireless PC.

Right now the Linksys 4 port router connects to the ADSL modem and 4 PCs -and I want to add a new Belkin wireless router to provide a wireless LAN access and have 2 add'l LAN ports.

Therefore, can I, and how do I configure the devices, so that the ADSL modem would go into the Linksys router; the Linksys would provide LAN connection to 3 PCs and the 4th port would go to the input of the Belkin router, which in term would provide wireless access and 3 more LAN ports?

Thanks.
 

A:Combining Linksys Router and Belkin Wireless Router

Connecting two SOHO broadband routers together.

Configure the IP address of the secondary router to be in the same subnet as the primary router, but out of the range of the DHCP server in the primary router. For instance DHCP server addresses 192.168.0.2 through 192.168.0.100, I'd assign the secondary router 192.168.0.254 as it's IP address.

Disable the DHCP server in the secondary router.

Setup the wireless section just the way you would if it was the primary router.

Connect from the primary router's LAN port to one of the LAN ports on the secondary router. If there is no uplink port and neither of the routers have auto-sensing ports, use a cross-over cable. Leave the WAN port unconnected!
 

Read other 3 answers
RELEVANCY SCORE 68.4

I set up everything and if I have it wired it works fine but wireless it says can't find page when you try to get on the internet. I have set up networks before and never had a problem. first time I have used a Belkin router G+ I guess one of my question is this. I was reading on the Belkin site that it is already set for dynamic and that is for a cable modem and sounds like I should change it to pppoe for a DSL modem. would that make the difference. It is a brand new laptop and the wireless card is on and it sees the network and works when wired, it says it is connected wirelessly but wont get on the internet when not wired. Would the pppoe thing make a differnce? Please give me some help here. Thanks
 

A:Belkin wireless router with vista-wired works wireless doesn't

Read other 8 answers
RELEVANCY SCORE 68

Hi all,
I just connected with WiMax, problem is I have the wimax wireless router in the house(all good).

But my office is in the garage! I was hoping to run an ethernet cable from WiMax Zylex router to my Belkin Wireless Router.

Is this the way to go about, sharing my internet connection? Also can anyone
give me any pointers on how to go about doing this.

cheers,
LiverKing.
 

A:Connect WiMax wireless (Zylex) with my Belkin N wireless router

I am no expert but will try to help. If I have understood you correctly, you only require the one router.
If the router in the house is a wireless router and your computer in your office is equipped for Wi-fi you could connect wirelessly. You will need the access code for the router when you try to connect. I think it will be a WEP or a WPA PSK code.
Otherwise run a ethernet cable from your house router to your office and connect it direct to your office computer (not too a second router) This is probably the safest method anyway if you do not need wireless.
You will then need to set up a network by going to "Control Panel" and clicking on "Network Setup Wizard" and following the instructions.
Hope that is of some help to you.
 

Read other 5 answers
RELEVANCY SCORE 67.2

I have a Microsoft Wireless Network Router and a Microsoft Notebook wireless 11g adapter and they work great. I am running the Base station on a desktop running Windows XP and the laptop is running Win 98. I bought a Belkin wireless USB 11b adapter for a third desktop running Win 98 but can't get the belkin adapter to connect to the network? Any advice or help would really be appreciated.
TIA for any help!!!
 

A:Using Belkin wireless adapter with Microsoft Wireless Router

Read other 7 answers
RELEVANCY SCORE 66.4

I tried to set up my password on my belikin wireless G router from the 192.168.2.1 screen and once i did set it the router rebooted and hasn't came back on since. I have reset the thing every way I can think of and the wireless and the 192.168.2.1 screen will not come back online the power button just keeps flashing but I can still access the internet thru the hard wired connections any help will be greatly apprieciated
 

A:Belkin Wireless Router

Reset the router to factory defaults by holding the reset button down for 15 seconds with power on.
Turn off everything, the modem, router, computer.
Connect the modem to the router's WAN/Internet port.
Connect the computer to one of the router's LAN/Network ports.
Turn on the modem, wait for a steady connect light.
Turn on the router, wait for two minutes.
Boot the computer.

When the computer is completely booted, you should be able to access it using the default IP address and blank password.
 

Read other 3 answers
RELEVANCY SCORE 66.4

i have a belkin wireless router; everything went fine until it tried to connect to the internet; i was thinking that because i have aol that i have to do something else to make it work;i havve aol dsl; win xp, and a belkin 802.11g router

thanks from
[email protected]
 

Read other answers
RELEVANCY SCORE 66.4

Hi, I wonder if someone can advice if its possible to increase the power ouptput of the above router I have an Advent 7201 laptop with a Ralink wireless lan card 2 in it; can the power of this card be increased. thanks Al
 

Read other answers
RELEVANCY SCORE 66.4

Hi all, i configured a belkin wireless N1 router for 4 pc's. two of which are vista operated and the other two are xp's but the vista pc's connected to the wireless router easily when i set the security parameters. the xp's on the other hand will not even detect the wreless network lest talk of me configuring it. can someone please me here. it is very urgent. thanks.
 

A:Belkin wireless N1 router

You have to enable Internet and file sharing in XP. Are these XP computers updated to Service Pack 3? Are the Vista computers updated to Service Pack 1?
 

Read other 2 answers
RELEVANCY SCORE 66.4

I have this running with my xp but when I try to change any settings it asks me for a password that I don't remember creating.
How can i find this out.
Many thanks, Allan.
 

A:Belkin wireless router

Read other 16 answers
RELEVANCY SCORE 66.4

Hey all,

I have a Belkin F5D8236-4.....
I completely forgot my password for my router and cannot find the disc that came with the router. I want to change my password. Can someone help? Pleeeaaase?

Sandy
 

A:Belkin Wireless Router

You can reset the router to factory defaults and configure it using the web based setup, you don't need any disk. You can download the manual from Belkin's support site.
 

Read other 1 answers
RELEVANCY SCORE 66.4

Ok well first off I always come here for help and finally I have a need to post =P

In 2003 for Christmas I got an HP Pavilion a305w PC with a Belkin wireless router and adapter. It has worked fine until recently. I noticed that I keep getting disconnected from my network and the internet. My computer tells me that I am connected still and my Belkin Wireless Utility program says I have signal... but I cannot access network resources or internet resources. If I try typing in my router setup page it times out. This happens about every 10 minutes or if I transfer a lot of data and lasts for about 7 minutes. I have almost given up using my computer because I ran a networking cable directly from the router to my computer and there was no problem but my dad wont allow me to do it again. I do not know if there is some sort of interference or if my adapter is going bad. I have reformattes my computer several times, each time reinstalling the driver I got on CD and the driver from the Belkin Website. Still it does not work. I have found that by using the Belkin Wireless Lan Monitor program and hitting Re-Scan, it will search and find the network again and lets me stay on for about 10 more mins. It is getting really annoying and no one anywhere else can seem to help me.

By the way it is a Belkin 802.11b 11Mbps adapter - model F5D6050 (discontinued)
 

A:Help with Belkin Wireless Router please?

Read other 6 answers
RELEVANCY SCORE 66.4

Hello there,

I've installed a Belkin N1 Wireless Router for a client, and it seems to go down every night just in time for the morning. By go down, I mean that although clients are still connected to the SSID, no networking functionality (network drives, connection to the Internet) is available.

This is resolved by hard rebooting the router. Do you think there could be issues caused by cordless phones etc... that cause the connection to go down, without fail every night?

I've tried changing the Wireless options so that "Protected mode" (a setting that prevents interference from other wireless devices) is on, and I moved the connectivity to a different channel number.

Is there anything else that I could try?

Richard
 

A:Belkin N1 Wireless Router

Read other 12 answers
RELEVANCY SCORE 66.4

I have a Belkin Wireless Router model F5D9230-4. I can connect to the internet wirelessly on both of my computers. I cannot connect to the routers admin page even while i have the router directly plugged into my computer. I've tried using both of my computers to do it. It just thinks.. and thinks.. and then says failure. The IP address for the router is 192.168.2.1, I've reset the router, factory reset the router and tech support was less than useful so I'm here...

Here is what I believe I will be asked for soon.. let me know what else I need.

Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.

C:\Documents and Settings\Brandon>ipconfig

Windows IP Configuration
Ethernet adapter Local Area Connection:

Connection-specific DNS Suffix . : Belkin
IP Address. . . . . . . . . . . . : 192.168.2.2
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.2.1

Ethernet adapter Wireless Network Connection:

Connection-specific DNS Suffix . : Belkin
IP Address. . . . . . . . . . . . : 192.168.2.4
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.2.1

C:\Documents and Settings\Brandon>

-----------------------------------------------------------------------

Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.

C:\Documents and Settings\Brandon>ping 192.168.2.1

Pinging 192.168.2.1 with 32 bytes of data:

Reply from 192.168.2... Read more

A:Belkin Wireless Router

Read other 13 answers
RELEVANCY SCORE 66.4

i just recently installed a wireless router -------on my end its working but on the other computer i cant get on internet, when i installed it it had a security thing and i chose my pass word, now im not sure how to find it or unlock it, i think it may be the reason why i cant get online on the other computer (but not sure) the computers ARE close by each other and in the same. If soeone could please help me figure out how to get this working id realy appreciate it. I dont want to sound stupid here but idiot directions would be greatly appreciated. Thank you!
 

A:belkin wireless router help PLEASE!

Read other 12 answers
RELEVANCY SCORE 66.4

took the belkin back and they gave me a dynamde, works with one Laptop ireless, the other tel me it is conect but get the usual message cannot connect to the network, try looking at your connections , losig the will to live
 

A:Belkin wireless router

Try a firmware update, and or change the wireless channel to either 1 or 11.
 

Read other 9 answers
RELEVANCY SCORE 66.4

can i use the belkin wireless router in the place of the wireless adapter to connect to the internet thank you much for your time
 

A:belkin wireless router

Read other 8 answers
RELEVANCY SCORE 66.4

hi........

want to connect my 2 laptops to the internet using an old belkin router that i found from a friend...

when i connect them only the xp got the internet connection no luck with my macbook pro i can see the routers name on the macbook but still no connection when i click the routers name it ask me the WEP password which i dont have idea what is it......BTW want the macbook pro to be wireless.

the question is it possible to connect the two laptops to the internet and do you have any suggestions or links on how to do set up this things, really no idea on what i'm doing please help.

thanks,
 

A:Wireless set up with Belkin router?

I'm not an expert on wireless networking but I know just enough to be dangerous. You can connect several devices wirelessly to your router including your two laptops. However, everything does have to be compatible.

How did you set up your Belkin router? Did you set up a security protocol? WEP is an older less secure protocol. Perhaps your router was set up with WPA or WPA2 and the MAC is only compatible with WEP. Just a possibility.
 

Read other 3 answers
RELEVANCY SCORE 66.4

Can someone please tell me how to get my router to be "OPEN" for xbox live.

For years now I have been unable to rectify my NAT being closed.

Thanks
-g
 

A:Belkin wireless g router help

Read other 16 answers
RELEVANCY SCORE 66.4

I recently bought a belkin wireless g router, model F5D7230-4. How clever was I buying it on ebay for half the retail price! Step one was easy enough and I loaded the driver. Step two said I was to connect my existing modem to the router. My modem has a USB connector and the router has an ethernet port. How the hell do I connect USB to ethernet?
 

A:belkin wireless g router

Read other 12 answers
RELEVANCY SCORE 65.6

I need help. I have a Belkin Wireless G router here at home which is currently set at:

ESSID Broadcast > ENABLE
Wireless Mode > 11g only
Wireless Channel > 9
Extend Range > ENABLE
Protected Mode > auto
Turbo Mode > enabled

I can access this network through my Mac laptop, although it cuts out now and then and then i change channels and get it back. but can't ever get my husband's Windows XP to connect. i have tried various channels - no luck. Any ideas?
 

A:Trouble with Belkin Wireless G Router

Which error message do you get when attempting to connect from the Windows XP machine ?
 

Read other 3 answers
RELEVANCY SCORE 65.6

hi there!
i
got the above router, and i want to use the eMule program.
i constantly get a low id, and when i test the ports in the program it says that : "If you use a router, make sure that your router forwards the required ports to your local IP"
the ports are 4662 for UTP and 2673 for UDP.

HELP ME!!!! :-(
 

A:Belkin wireless G router problem

Sorry, TSG does not provide support for P2P software issues.
 

Read other 2 answers
RELEVANCY SCORE 65.6

I keep losing the connection on the router (red light comes on) and I have to keep resetting the router to get the line back. This can take 4 or 5 resets to get the line back. Any suggestions as to the problem?
 

A:Belkin FSD9630 Wireless Router

Read other 6 answers
RELEVANCY SCORE 65.6

i am using ADSL internet at my home.

Modem: Huawei SmartAX MT882a
Wireless Router: Belkin Basic Wireless Router N150

my problem is i can connect internet by dialing dialer with my username and password but can't connect wireless router?
how can i connect? my internet is dynamic.
 

Read other answers
RELEVANCY SCORE 65.6

Hello
My Belkin Wireless G Router software won't find my router.
I can access my D-Link modem throught the address:10.1.1.1

I have my D-Link DSL 502T modem plugged into my Belkin Wireless G Router 802.11g connected to my laptop through a local area connection (I have wireless connection Disabled).

I am trying to access my router so i can open my NAT

Laptop info:
Windows edition
Copyright 2007 Microsoft Corporation. All rights reserved.
Service Pack 1

System
Manufacturer: Dell
Model: Studio 1735
Rating: 5.0 Windows Experience Index
Processor: Intel(R) Core(TM)2 Duo CPU T8300 @ 2.40GHz 2.40 GHz
Memory (RAM): 4.00 GB
System type: 32-bit Operating System

ipconfig/all:
Microsoft Windows [Version 6.0.6001]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.

C:\Users\Me>ipconfig/all

Windows IP Configuration

Host Name . . . . . . . . . . . . : Ashton-Laptop
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Broadcast
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

Wireless LAN adapter Wireless Network Connection:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Dell Wireless 1510 Wireless-N WLAN Mini-C
ard
Physical Address. . . . . . . . . : 00-22-69-21-67-C3
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes

Ethernet adapter Local Area Connection:

Connection-specific DNS Suffix . :
Description . . .... Read more

A:Can't Access Belkin Wireless G Router

Read other 14 answers
RELEVANCY SCORE 65.6

I wonder if anyone can help I need to open a Belkin

Hi,
I'.m looking for someone who can assist me in opening a Belkin Wireless Router.
If you have no idea how to do this please dont reply and dont 'close' this topic I will do that if I feel that I'm wasting my time on this forum, thank you. Allan

i



rwireless
 

A:Openin a Belkin Wireless Router

Just stick a screwdriver in the side and crack it open.
 

Read other 2 answers
RELEVANCY SCORE 65.6

Hi everyone, i' new to this forum but i've looked arround and it's awsome.
I have a question that has been bothering me for quite some time now.. This is my third router and all of them have had the same problem!
When i make large downloads (over let's say 50 Mb) or when i vist sites and forums with more than 10 - 15 good quality pictures the router locks up.. the network works fine but it doesen't broadcast tha web .. so there i go.. unplug the router.. wait a while .. reconnect then i comes back to normal until i download again or view those sites again!

Router:
First: Gigabyte .. don't recall the modell but it was 54Mbs
Second : SMC barricade G
Now : belkin f5d7230-4 (with the last firmware installed)

Hope anyone can help with this... cuzi'm about to hit this router with a very heavy hammer
Thanks
 

A:Solved: Belkin Wireless Router

Did you try using different channels?
I would also see if your router supports "Protected Mode". That fixed a similar issue for me awhile back.
 

Read other 3 answers
RELEVANCY SCORE 65.6

Hi all

I recently bought a belkin F5D7231-4 wireless router to replace my old netgear RP614 which was wired.

When I connect it with my modem (D-link DSL-300T) It doesnt seem to find the internet at at all even though it says connected, I tried setting it up with the tiscali (ISP) codes provided on there website even changing the connection type which is supposed to be PPPoA still nothing.

I end up losing my patience with it and plugging in my old router which works perfectly

When I tried doing the easy setup or whatever its called it kept saying my details were not accepted by my ISP even though I corrected them about 6 times so, I'm lost and really need some help from the God's and goddesses the roam the forums

Thanks
any help wil be appreciated
if you need more information let me know
 

A:belkin wireless G plus router problem

Read other 7 answers
RELEVANCY SCORE 65.6

Hi everyone
Ok, newegg.com offered a combo deal for a dlink dir-655 with belkin F5D8013 N Wireless Notebook Card for $65.00 shipped so i jumped on this deal and ordered. but for some reason I'm unable to achieve speed of more then 54 \ 81 Mpbp ( transmit speed showing at 135 and receive speed at 54 and sometimes 81 Mbps ) .not sure if i am still overlooking a step or two or some kind of tweak in router setup that would help achieve the full 300Mbps.i searched thru d link forum for solution but came up empty.

dir-655 Hardware Version: A4 Firmware Version: 1.21
dir-655 Wireless setting as follows:
802.11 Mode : Mixed 802.11n and 802.11g ( 802.11n only with same results )
Auto Channel Scan : Enable ( also tried to lock to specific channels but same results )
Transmission Rate : Best (automatic)
Channel Width : Auto 20/40 Mhz ( locking into 802.11 only with 40 Mhz gave me same results)
Security Mode : WPA-Personal
WPA Mode : WPA2 Only Cipher Type: AES

since I'm not to tech savvy i did not try to tweak any other setting in router so all other settings are at the factory defaults.(other then the wireless setting as per above). if anyone can suggest a solution to increase my speed it would be greatly appreciated.
here are the links for both the router and wireless card:
http://www.newegg.com/Product/Product.aspx?Item=N82E16833127215
http://www.newegg.com/Product/Produ...&cm_re=belkin_wireless-_-39-314-010-_-Product

Thanks,
Amber
 

A:dir-655 router & belkin n wireless card

Read other 9 answers
RELEVANCY SCORE 65.6

Hi guys - hoping some of you can help me with the problem im having - ive tried to search the internet for a solution and tried loads of things but to no avail.

I have a Vista laptop and im trying to setup a Wireless router in my flat. I have a Belkin F5D763-4 router.

My parents have the same router set up in their house and I can access that fine with my computer wirelessly.

I am currently running a Tiscali wired connection for the internet which runs fine.

I go through all the setup options on the Belkin instructions but when I try to connect to the router it gives a message saying connected with limited connectivity. From looking around the internet this seems to be a common problem.

I dont know if this is relevant but when i tried to set up the router via the network car and cable on my PC it would not connect to the router unless i had the wired modem connected through USB and an inernet connection established.

Any thoughts much appreciated.

Thanks in advance

Mike
 

A:Solved: Help with Belkin Wireless router

Read other 16 answers
RELEVANCY SCORE 65.6

Hi, I've got a Belkin Wireless G router, although I'm not using the wireless part of it, tied into a wireless antenna (it's an... interesting... "hi speed" network)

My problem is that web pages (and other things requiring URL-type lookups) will sometimes/often (seems to vary wildly) fail to load. I assume it's something to do with DNS, because if I'm in the middle of an internet based game like World of Warcraft, there is no issues, but if it's "doing it's thing" when I'm trying to first log in, it'll tell me it can't find the login server or somesuch. The same happens with internet-based radio (streaming through Winamp) although the bookmarks I have that seem to have numeric IP addressess instead of someradiostation.com/stationname or whatever, seem to be unaffected.

The cycle appears to be, web works fine, then fails to load (immediatly noticable, pages just pop up "can't find whatever"), then after a bit (10-20 seconds of attempting to reload every few seconds) it'll go into "searching" mode where it doesn't fail to load immediatly, it just hangs out for 10-20 seconds waiting, then things will start loading again like nothing happened. I can be online in World of Warcraft during this time and notice nothing apparently different ingame.

The router firmware is up to date, my ISP requires static IPs which I have set, along with the DNS servers (although I really should ... Read more

A:Belkin Wireless G Router- possible DNS issues?

Read other 7 answers
RELEVANCY SCORE 65.6

Hey guys, I'm tearing out my hair here, this should be so easy.....
I have a Toshiba Satellite Pro laptop trying to connect to a Belkin Wireless G Router F5D7230-4. IP address adress has been changed to 192.168.2.2 since the defualt IP address of the router should be 192.168.2.1. I wasn't sure about the DNS addresses but have tried both what they were before I started and 192.168.2.1 in separate attempts to get this thing working. I've disabled Firewalls, and looked under every rock, but still can't ping the router. I'd love to upgrade the firmware on it, but need to ping it to do that!
Can anyone help?
 

A:can't ping Belkin Wireless router

Forgot to mention that the router looks very happy...it knows what port the PC is connected to, and that the modem is plugged in.
 

Read other 2 answers
RELEVANCY SCORE 65.6

i cant connect my wirless PC to the net

could someone please tell me the preferred settings for
a wireless belkin router

wireless G router f5d7230-4

A:ip config for wireless belkin router

The question is very similar to "How long is a piece of string?". What is actually happening when you try to connect to the router? Is your network showing up in the network list? If so, what happens when you try to connect? What errors are you getting? Supply us with some more info and then we can help.

Read other 1 answers