Over 1 million tech questions and answers.

Admin share disable or enable?

Q: Admin share disable or enable?

My computer started acting funny after watching videos online and getting tons of pop-ups. Some of which claimed I could have a potential virus. Now I know this came from a site and I should never read into it. but it had me wondering.
Then i noticed all of sudden some of the websites I was looking at like would stop opening and would be unavailble.
Now I have AVG Virus Protection on my computer. It is letting me know that my PC health is not good cause the administrative share is enabled and it says I should disable it.
i do not fully understand what this means and why this was an issue in the first place. What should I do? Do I enable or disable and why?

Read other answers
RELEVANCY SCORE 200
Preferred Solution: Admin share disable or enable?

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

RELEVANCY SCORE 99.6

Hi Team,

As per our security requirement we need to block C$ share on the network,but we need to enable Admin$ as we are using SCCM to push softwares ,how to achieve this?

TechGUy,System Administrator.

Read other answers
RELEVANCY SCORE 73.6

Hello,
I was trying to figure out a way to block admin share access over windows domain network.
These are my requirements:

Desktop Support Engineers should have administrator privileges on all domain joined windows workstation machines. Domain Users should not have administrator privileges on their workstations.Desktop support engineers should not be able to access admin share over the network.Domain Admin must have full access on Admin Share.
So I have added NT AUTHORITY\INTERACTIVE as a member of Buit-In administrators group and I have added Desktop Support Group as a member of NT AUTHORITY\INTERACTIVE.
Which actually blocked admin share access over network for Desktop support engineers. however I was not able to control Domain Users getting Administrative privileges on domain joined PCs from above settings.

How can I control this admin share access?   

Thanks in advance.
Isurinda.

Read other answers
RELEVANCY SCORE 71.2

Let me start by explaining what led to my problem.

I work for an electric utility, and we issue Panasonic Toughbook laptops to our linemen containing our mobile mapping and AVL (Automatic Vehicle Locating) software. They are all running Windows XP Professional SP3. Our AVL software requires an internet and VPN connection to our AVL server at the office (we currently use Verizon Air Cards and the Cisco VPN client to achieve this). Since implementing this, we have found that Cisco VPN and the Verizon Air Cards do not work well when the wifi network adapters are turned on (or enabled). When they are turned off (disabled) everything works nicely. We can't just disable the wifi NIC's and call it good either because our user's need the faster wifi connections to perform database syncs in the mornings (via hotspots inside each garage bay). Once they are all synced up and out of range of our wireless network, the wifi NIC's are no longer needed. Since the wifi NIC's and Air Cards don't get along, we have been having our users turn the NIC's off using a hardware switch on the Toughbooks cassis. However, some of our older models (CF-29's to be exact) do not have these hardware switches. Our solution was to create two batch files and place them on the users' desktops; one that turns the wifi NIC on, and one that turns it off.

This brings you up to my current problem...

Our user?s logon to a non-admin account and because of this, they do no... Read more

A:Problem allowing Enable/Disable WiFi Adapter with Non-Admin Account

I take it that's a "no"?

Read other 5 answers
RELEVANCY SCORE 58

There is a user, Dad, with admin privileges on a Windows 7 machine (this is me).

There are other users, kid1 and kid2, with no admin privileges (my kids ;-) )

I want to let kid1 and kid2 access the contents of a directory in my userspace C:\Users\Dad\ . In fact it's not at the top level, let's say it's C:\Users\Dad\ownCloud\photos (because it is). I want to let kid1 have read/write access and kid2 read only access.

I navigated my way to C:\Users\Dad\ownCloud and then right-clicked on photos, clicked on properties, clicked on the sharing tab, and did what looked like the sensible thing (gave the kids the required access).

I then logged in as kid2 and attempted to find my way to C:\Users\Dad\ownCloud\photos. I got there -- but on the way I saw far too much -- kid2 can see a complete list of the names of all files and directories in D:\Users\Dad (not ideal) and also names of all files and directories in C:\Users\Dad\ownCloud (which is not acceptable, because that is my entire life in the cloud).

Is this expected behaviour when sharing directories in Windows? If not, what did I do wrong?

If so then this is no good and I guess I need a workaround. The problem is that I am not at all sure that I can move the directory, because it part of a cloud storage service (like Dropbox, but a different company) and as far as I know that directory ...\ownCloud\photos (the one I want to share with my kids) must be a subdirectory of ...\ownCloud (the one that I really don't want my kids ... Read more

A:Admin wants to share a directory with non-admin users

NTFS Folder Permissions

I'm thinking if you create a symbolic link in C:\Users\Public you may be able to let the kids go directly to the shared folder. Perhaps then you can deny Traverse permission to block the parent folder. But I haven't done it myself.

Stoik Joker,who has the NTFS permissions page in the above link, is also a regular poster on DonationCoder.com. You may be able to ask for clarifications there. And of course someone with SysAdmin type experience may chime in here.

If you succeed using external info please post the solution.

Read other 1 answers
RELEVANCY SCORE 52.8

Hi!

Does anyone here know how to enable the administrative share in Windows XP? I am talking about the c$ in particular, this is the one I want to access. I am a complete newbie when it comes to using administrative shares. But after some research I have managed to enable the administrative share in Windows Vista. But that doesn't help my XP computer.

For those of you looking for this information, here's a short how-to on enable administrative share in Vista:

Open Regedit.
Go to HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System
Make a new DWORD value.
Name it LocalAccountTokenFilterPolicy
Right click it and click Modify, and then change "Value data" to 1.

Now you should be able to access the administrative share of your Vista computer.

Practical example of what this does:
Open the Run prompt (Win+R)
Type in \\192.168.0.3\c$ and press Enter.
You should be able to browse through the file and folder structure of the C: drive on the 192.168.0.3 computer for which you have enabled the administrative share access, as shown above.

Well, of course, you will need to change the IP address above to whatever IP address your computer is having.

How about that Windows XP?
So that's administrative share in Vista for you... So! How do you do the same thing for a Windows XP computer?

From what I have read on various websites this shouldn't be necessary for a Windows XP computer, because administrative shares should b... Read more

Read other answers
RELEVANCY SCORE 52

me and my friend have two new laptops{wireless enable} i wanna share my internet with him. can he access internet without any router and others.
 

A:share internet with two wireless enable laptops

not easily. if you have internet on your laptop through your ethernet cable then you can do a peer to peer setup with your friends PC and do some kind of ICS but its ugly and I really don't recommend it. Best to just use a shared wireless access point or router.
 

Read other 1 answers
RELEVANCY SCORE 52

I'm trying to use PsTools to remotely send messages to clients (using the 'msg' program) regarding the network (e.g. a server is going to reboot). When using it in command prompt, it works for some machines, but for others, it errors about not being able to use the admin$ share on the target computer. I tried accessing the share via Run..., but again, it failed. The targets are all Windows XP. How do I make sure the admin$ share is accessible by the domain controller?
 

A:admin$ share

Usually any share with a $ on it is a default admin share and is
limited to the local computers admin acount.
You probably need to change them to standard shares by unsharing
it and clicking apply,then share it again and apply.
That should change the share to one without the $ limitation.
 

Read other 1 answers
RELEVANCY SCORE 51.6

Hello,
I try to mount a network drive using command net use between 2 computers : 
Windows XP (admin$) (keyboard Qwerty, EN)
Windows 10 Pro (net use) (keyboard Azerty, FR)
net use p: \\<ip_xp>\admin$ /user:<ip_xp>\administrator  <password>
But I have the error inside the sécurity event viewer : 529
Something like that : 
Logon
Failure:
Reason:
Unknown user name or bad password
User
Name: susan (different every few mins)
Domain:

Logon
Type: 3
Logon
Process: NTLMSSP
Authentication
Package: MICROSOFT_AUTHENTICATION_PACKAGE_V1_0
Workstation
Name: 
Caller
User Name: username
Caller
Domain: our romain
Caller
Logon ID: (0x0,0x3E7)
Caller
Process ID: 9692
Transited
Services: -
Source
Network Address: -
Source
Port: -





https://social.technet.microsoft.com/Forums/en-US/afffa8c5-f51e-48e1-a4eb-ad4802035b61/security-alert-event-id-529-logon-type-3?forum=winserversecurity

(The goal is to build a VM through VMware Converter)

Regards,

Read other answers
RELEVANCY SCORE 51.6

I found after the Windows Update in Nov 2017, most of PCs (more than 500) in my company change the Admin$ Share behavior. Now the Admin$ Share can read only but not writable. Any ways to fix it?

Read other answers
RELEVANCY SCORE 51.6

I am trying to enable the administrator account in Windows 10 Pro but without much luck.

Whatever option I try I am left with a request asking me for an 'admin username and password', which I don't have, but the only active box available is for 'No' anyway.

If I use the 'command prompt' route then I am not offered the same options that are indicated by the guide I am referring to.

Tried the Administrator tab in 'Local Users and Groups', where the Admin. account is ticked disabled but it won't let enable it.

It seems I am blocked at every point from enabling this and I can't carry out certain actions on the PC until it is.

I will be eternally grateful if there is someone who can shine some light on this. I am obviously doing something wrong but I don't know what.

Thanks

A:Can't enable Admin. account

Welcome to the forum. Are you signed in with an admin account why don't you know the admin password?

Read other 2 answers
RELEVANCY SCORE 51.2

http://www.hardforum.com/showthread.php?t=1338456

I have got one of my client has got a simple office network with three PCs (2 desktops A and B and one laptop C,,,,,all of them have got Vista Home edition).

Those desktop are connected through a modem router.

He bought a computer B recently and it has a Trend Micro Internet Security installed on it,,,,,,,a USB printer is connected to this B PC to be shared with A and C.

The other two PCs have not got Trend Micro Internet Security (I am aware of security implication , this is not the issue of our thread)

the printer is shared but A and C can not ping and can not print.

I am sure that the problem lies with the Firewall setting for Trend Micro Internet Security, because when I shut down it from A and C I can ping the B and I can print ,,,,while when Trend Micro Internet Security is running I can not ping B and I can not print.

I tried to search how to configure firewall to enable printer sharing I could not find that
http://www.vistax64.com/network-sharing/191646-xp-vista-printer-sharing-one-big-mess.html
If using Norton, McAfee, Trend Micro I.S., make sure file and printer sharing is enabled in THEIR firewall (or LAN allowed, depending on how their Exceptions are worded in their Firewall)Click to expand...

I tired google without any success.

http://www.google.com.au/search?cli...printer+sharing+how+&meta=&btnG=Google+Search
http://www.microsoft.com/windowsmobile/en-us/help/synchronize/guide/activesync-tren... Read more

A:Trend Micro Internet Security enable USB Share printer

Found this:
http://esupport.trendmicro.com/Page...l-Firewall-Profiles-of-Trend-Micro-Inter.aspx

it appears you have to choose the Office Network Profile.
 

Read other 3 answers
RELEVANCY SCORE 50.8

Hi Guys

Please let me know how to disable DEP temporarily in Windows 8:
I tried the below but did not work:


C:\bcdedit /set {current} nx Always Off


Then I would like to set it back to normal:


C:\bcdedit /set {current} nx OptOut

When I try, the following message appears:
"An error has occurred setting the element data. The value is protected by secure boot policy and can not be modified or deleted".

Read other answers
RELEVANCY SCORE 50.8

Hi,
I want to disable TLS 1.0 and 1.1 on all windows 7 and windows 10 endpoint and enable only  TLS1.2.
I have the following question?
Is TLS 1.1 and 1.2 by default disabled in windows 7? If it is disabled, I just only need to enable TLS 1.2?
IS TLS1.1. and 1.2 by default disabled in Windows 10?
What is the difference between disable TLS by default vs disabled?
Looking forward to the answers.
Thanks
D

Read other answers
RELEVANCY SCORE 50.8

Hello,
I always get a message, probably after 2 weeks, telling me that If you would like your computer plugged in for more than 2 weeks... And then it recommends me to enable "Desktop mode" but I don't really understand what it does.

So, which better? Enable or Disable it?

Thanks.

Read other answers
RELEVANCY SCORE 50.8

Hi All,

Can anyone let me know how to Enable/Disable USB port in Registry ?

Waiting for your reply.


Regards
sivags.

A:How to Enable Disable USB in Win XP

Hi Sivags,
I looked through all my registry stuff and found nothing. But........I do recall that there is s search function in the regedit under the Edit tab I think. You might be able to search for USB and find exactly what your are looking for.

Not much help, but it might pay off.
Regards,
Mack1

Read other 2 answers
RELEVANCY SCORE 50.8

Hi Everyone,
Have an annoying problem.When i turn my computor on, to use the net i have to first disable then enable to get to my home page i use, my router shows a permenant connection, and i have no problem useing the net once i have completed this process. I use windows xp professional and have all the latest updates from microsoft. I also am unable to turn on my system firewall although im advised that my router has its own firewall and im quite safe. Anyone got any idea's

Regards Andi
 

A:Disable Enable

Read other 14 answers
RELEVANCY SCORE 50.8

I am using Nero Rom burn and Nero Vision Express.

I heard in burning dvds one should enable DMA on your computer ?


Why is this and what does this do ?


How do I enable/disable DMA on Windows Xp ?


Thanks.

A:Enable and Disable DMA on Win. Xp

This article has some decent info -> DMA reverts to PIO | Windows Problem Solver

Read other 4 answers
RELEVANCY SCORE 50.8

Can anyone please tell how to enable/disable the

1.USB port

2.CD/DVD Drive

in the Windows. i have win Xp SP3 installed on my system.

Thanks.
 

A:Enable/disable USB

You could probably disable them using Hardware profiles but probably not what you want.
http://www.lockergnome.com/windows/2005/02/23/setting-up-hardware-profiles-in-xp/

My other suggestion.
Remove the IDE cable from the motherboard for the cdrom.

As for the USB.
http://support.microsoft.com/kb/823732

And another option.
http://support.microsoft.com/kb/555324
 

Read other 2 answers
RELEVANCY SCORE 50.8

Hi everyone,

I'm new to the forum but it looks like a great place.

I was wondering if anyone had found a solution to accessing the default admin shares (c$, d$, etc) on a vista machine over the network.

I've tried the solution mentioned here: Default Admin Share C$

But it didn't fix anything.

I can access other non-admin shares on the computer but can't access any of the admin shares. I'd rather not have to create more shares, but obviously that is a solution.

Thanks in advance.
John

A:Accessing Deault Admin Share

Hi, 06graphite, and welcome to the forums.

I assume you went through the entire thread and tried all 2 (or 3) suggestions?

Read other 5 answers
RELEVANCY SCORE 50.8

So I'm trying to fix my cousin's computer, for some reason they disabled the admin account. Using the command net user administrator /active:no. This wouldn't be a big deal to re-enable, but there's only other account other than the admin account a user account. The problem is that other account has parental controls on it, and the only way to re-enable the admin account is with a password, but since the admin account was disabled it seems to be glitched as the previous password is no longer working.

Read other answers
RELEVANCY SCORE 50.8

Hi everyone !

Recently I discovered that Windows has a built-in default disabled super admin account ( for those who did not know like me I provided a link , but there are many in the Internet , above )

First an "introduction":
I suppose , looking at your config ( if I am wrong please tell me ), that most of you use an admin account ( that one Windows give you when you log in the PC for the first time and you are the only user ).
I don't.
I use ( even if I am the only human user of my PCs) a standard user ( I mean a user without admin privileges ). And I created a local admin account (protected by pw) , so when I have to run something that requires admin privileges, UAC ask me that PW ( like the UAC that you see prompts in some videos , but I fill a pw instead of simply clicking Y/N).
So..

As you can read also in the link I provided , that super is used usually to troubleshoot problems .
But..
As using a standard account is an improvement in security ( MS suggest to use that , at least in Italy ) ..
I was wondering if it would be the same for super admin : so enable it and obviously protect it with a pw( like I protect the local admin with a pw request at every UAC prompt )
Actually I ask this out f curiosity , because I feel already pretty safe with my config .

Looking forward to hearing from you!

Thank you for reading
 

A:Super Admin: did you enable it ? ( pw protected )

I was once advised strongly against using super admin, except when you really need to. It gives super power also to the malware, not just to you.
 

Read other 0 answers
RELEVANCY SCORE 50.8

I keep having problems enabling the adminstrator account on my windows 7 computer.. i tried command prompt but it wont work... whats a good way to enable it??
 

A:Solved: Enable admin account

Read other 6 answers
RELEVANCY SCORE 50.8

Sorry the title limit was too short.

Basically what I was wondering is:

Is there a way to enable the built-in elevated administrator without logging on to a current admin account and without having to ender the admin password?

e.g. from the welcome screen or from a standard user account.

I am on windows 7 home premium 64 bit.

Thanks

A:Is there a way to enable the built-in administrator without admin?

Hello japb, and welcome to Seven Forums.

You could try METHOD II in the tutorial below to see if may allow you to.

Built-in Administrator - Enable from WinRE

Read other 2 answers
RELEVANCY SCORE 50.4

hi . i disable administrator share but when i restart or shutdown my computer again administrator share enable .please help me .

A:Disable administrator share

For Workstations (Vista/Windows7)
Click Start?>Run type regedit click ok
For vista users Enter your UAC credentials to continue.
Open the HKEY_LOCAL_MACHINE branch.
Open the SYSTEM branch.
Open the CurrentControlSet branch.
Open the Services branch.
Open the LanmanServer branch.
Select the Parameters branch.
Select Edit, New, DWORD (32-bit) Value. Vista & Windows 7 adds a new value to the Parameters key (If you have the key just check for correct value).
Type AutoShareWks and press Enter. (You can leave this setting with its default value of 0.)
Restart Windows  to put the new setting into effect.
I hope this work out for you this time.Good Luck.Microsoft Certified:

MCP, MCSA, MCSA Security, MCSE, MCSE Security.

Read other 16 answers
RELEVANCY SCORE 50.4

I hope I am not duplicating something here. . . . I did look - Honest!

I ran into an interesting problem and found an easy fix.

First: I wanted to ENABLE AHCI because (supposedly) it improves HDD performance. (It also enables a host of other interesting features.)

I discovered the trick of setting the START paramater in the registry key:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\msahci
from "3" to "0" - and then making the switch in the BIOS.

I tried to switch back, and simply resetting this start value to "3" doesn't work.

The issue here is that there are actually TWO keys that control the IDE/AHCI interface choice:HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\msahci
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\pciide
When the system is in IDE interface mode, the respective start values are:msahci's START value is "3"
pciide's START value is "0"
When the system is in AHCI interface mode, the respective start values are:msahci's START value is "0"
pciide's START value is "3"
It is entirely possible that setting the START value to zero in the key representing the interface type you wish to use, may cause the corresponding key in the other interface type to automagically switch to "3". I do not know this, nor have I tested it.

What works for me is setting both START values to the values that correspond to the interface I wish to use.

It should be trivially... Read more

A:Enable and/or Disable AHCI

Hi jharris. Welcome.






Quote:
First: I wanted to ENABLE AHCI because (supposedly) it improves HDD performance. (It also enables a host of other interesting features.)


For me, the reasons to enable AHCI are Native Command Queuing and Hot Swapping, hot swapping being the most important to me.

As far as switching back and forth, I could imagine issues arising from that (including confusion as to what mode I was running in at a given time...).

But if I needed to do it as a utility to convert drives to vhd's, I would consider a dual boot, with the AHCI disabled boot just a simple OS with whatever utilities I needed to get the job done. Keeping it simple would mean a quick boot to desktop and a small partition.

James

Read other 3 answers
RELEVANCY SCORE 50.4

Hello, I've got a 9 multimonitor system, 3X Nvidia GPU + 3X Usb UGA-165

I have disable the 8 of them, but now Win10 doesn't appear to me any of the disable monitor in "Display Settings",
I have re-enable the 5 of them using the Nvidia Control panel but I can't re-enable the Usb monitors cause they don't have control panel and Nvidia control panel doesn't control them.

The problem is that Windows "Display Settings" have remove the disable monitor, so is there any trick or registry setting that can change that?
As you can see there are missing monitors 6
, 7 and 8.

Thank you

A:How to enable a disable monitor?

Nevermind, I found a way to open old display settings

Win+R
control.exe desk.cpl,Settings,@Settings

Read other 2 answers
RELEVANCY SCORE 50.4

Are there any advantages or disadvanteges in disabling iPV6? It comes enabled by default in Vista 64.

A:Enable/disable iPV6

Someone else ask this same question on another thread and I was just going to ask it as well so, no solutions here, just an attemp to bump up the thread and get an answer to it since I am having some connectivity and network printability issues myself

Read other 8 answers
RELEVANCY SCORE 50.4

Hello forum,

This is just a simple unanswered question: can anyone explain how to enable / disable a wan ping to make the pc more stealth against hackers and port scans?

merci,

florent.
 

A:enable/disable ping

Read other 7 answers
RELEVANCY SCORE 50.4

When i click on a link inside a web page, i get an error indicating that a pop up window cannot be opened.

Can some one tell me how can i enable.disable pop ups on windows explorer. Also is there a way to control this on per web site basis

thanx
 

Read other answers
RELEVANCY SCORE 50.4

Is there any way to enable/disable each USB port in motherboard in Hardware level.

Please Help
 

A:How to enable/disable each USB port

Many motherboards allow you to do this. Check the BIOS. Press DEL or F1 or Esc when you first turn on your PC. If it is not a name-brand (Dell, HP, etc) , its always DEL.

But USB ports are wired in pairs (usually), so you'll disable 1/2, 3/4, 5/6, 7/8
 

Read other 1 answers
RELEVANCY SCORE 50.4

Just recently I disabled my internal mic in favor of an external mic. I tried to disable it the normal way but every time I kept disabling it, it would re-enable. I went to the administrator section to disable the internal mic that way and it worked, but it worked a little too well. Now when I go into my sound menu, it says no audio devices are installed. I can't simply right click and show disabled devices to re-enable it. I know this trick and it's not helping me. No devices are showing up either way. Now that I've done this, my external mic is not even working. Usually I can figure these types of things out on my own but this one is a whole different story. Please help!

A:Can't re-enable internal mic after disable

Turns out I actually got it working. By typing "internal" in the start menu search box, there is an option to find and fix problems. Luckily, it recognized shutting off your internal mic as a problem and it fixed it.

Read other 2 answers
RELEVANCY SCORE 50.4

I'm an administrator and I would like to know how to disable the screensaver tab in Windows 2000. I want to set the screensaver and then make the option inaccessible to the users. Since I'm making an image, I would like to know how to enable it later, if so desired. Can anyone help?
 

A:disable/enable screensaver tab

start > run > gpedit.msc
 

Read other 2 answers
RELEVANCY SCORE 50.4

Hello, So my laptop has keyboard functionality to adjust brightness and etc with using F1...F12 keys. I actually like that. The problem is: when I play video games, I need to press those F1...F12 buttons quickly, but I need to press Fn key ALSO to use F1...F12 keys' normal functionality and it really annoys me. And YES, I KNOW THAT BIOS THING, but as I mentioned I like that functionality when not gaming so I don't want to restart everytime I exit/start my game. I have seen that some manufacturers' laptops have software support to disable/enable that feature temporarily without restarting and changing something in BIOS, but I haven't found anything like that on my HP LAPTOP, I AM REALLY TIRED OF THIS HP CRAP, MY LAPTOP HAS PROBLEMS IN EVERY STEP. if you can suggest something, thank you.

A:How to disable/enable Fn key when Gaming

Hi, Please try the following instructions:     http://support.hp.com/us-en/document/c02035108 Regards.

Read other 2 answers
RELEVANCY SCORE 50.4

Hi,

My IE has been really alow lately. I cleaned out my temp files, ran a couple spyware/malware programs but it still seems a little sluggish. Somebody had mentioned to me to disable plug-ins that you dont need, but I am not sure which ones are necessary/unnecessary. Any thoughts are much appreciated.

Thanks

A:How do I know what IE Plug-ins to enable/disable?

Well that is down to the individual.

Ask yourself what plugins do you use?

Could you post a screenshot of your plugins?

Read other 3 answers
RELEVANCY SCORE 50.4

Fellow W7 users,

This is a challenge for anybody who can help me ...nobody could figure it out yet !


In windows 7 , IE 11 I cannot-enable-or-disable-any add-ons via tools , there is a stopsign in front of it.

There are no malware or virusses
I am the administartor
I have re installed IE11 several times via tools advanced etc.
Security level in IE 11 is normal. Enhanced security is off.
I even installed Local policy Editor, and via gpedit.msc, did the following :
1, click Start menu

2, type gpedit.msc in search box, press Enter to open Local Group Policy Editor

3, expand User Configuration-->Administrative Templates-->Windows Components-->Internet Explorer

4, in right window, find out and double click Do not allow users to enable or disable add-ons

5, click Not Configured or Disabled

6, click OK to save settings



Allas, everyhting failed, and I still cannot change my add-ons, it is blocked. See image.
The image is dutch but it speaks for itself.

Who can help ?

Thanks

Erik

A:In windows 7 , IE 11 cannot-enable-or-disable-any add-ons

Hi and Welcome to the Forum
Has this just happened? If so try a system restore to a point behind when it happened, see here:
System Restore - Microsoft Windows
If not try running sfc /scannow see here:
http://support.microsoft.com/kb/929833

Read other 9 answers
RELEVANCY SCORE 50.4

I use my Win Vista laptop at home and the office.

I use wifi at home and wired lan at the office. My laptop does have any settings in the TCP/IP properties. Everything is at default.

Every time I I try to use it at the office I have to disable and reenable the Lan connection from Manage networks, otherwise I do not get Net connectivity (except local lan).

No problem at home.

Since everything is default it picks up my IP from DHCP and gets other settings same way.

Why do I have to Disable and Enable the Lan connection before it starts accessing the Net.
 

A:Enable /disable Lan connection

If you put the laptop to Sleep or Hibernation before disconnecting the cable that may the cause. Try disconnecting the cable first.

The adapter/computer may not be "signing off" the network properly. Make sure you have the latest ethernet driver.

If the laptop is not rebooted from one day to the next, and
the work router or server is reset while the laptop is away, and
the lease time is long enough for the computer to think it still deserves the "old" IP, then that is a problem. Ask the network administrator to shorten the lease time, or shut down when you transport the machine, or live with your work around.
 

Read other 2 answers
RELEVANCY SCORE 50.4

Personally I don?t agree with some of the ways that?s been listed for disabling TeaTimer. So I?m doing something about it. To Disable TeaTimer1. Right-Click you TeaTimer Icon in the System Tray. Choose ?Run SpyBot-S&D?.2. In SpyBot Search & Destroy click the Mode menu and choose Advanced.3. A dialog box will display on the screen read it then click Yes.4. In the bottom left of the SpyBot-S&D window is 3 Options. Click Tools.5. Now you will be displaying the Tools options. Click Resident.6.1. If there is a Check in: Resident ?TeaTimer? (Protection of over-all system settings) active. Uncheck it.To Re-Enable TeaTimer Follow Steps 1-5 above then do the following6.2. If there is not a Check in: Resident ?TeaTimer? (Protection of over-all system settings) active. Check it.Grinler/Mods: Please Place this where it can be of use. Fix it up as needed as well.I made all the Screenshots I haven?t contacted Patrick to see if its all right to use screenshots of his program. ?SpyBot?, ?SpyBot-S&D?, and ?SpyBot - Search & Destroy? are all Copyright of Patrick M. Kolla.

A:Disable/Enable TeaTimer

Sure you can put it where ever you want it Just hope People get a use out of it.

I sent Patrick an E-Mail asking i'm still waiting to hear back from him.
i really don't see a problem if you do give him the Credit but i'll let you know soon as i find out.

P.S. Sorry i didn't submit it like a tutorial.

Read other 6 answers
RELEVANCY SCORE 50.4

Dear All!
I want to enable and disable internet without using enable or disable network in lan network, I want program on and off? have any program?
thank with best regards
 

A:Enable and disable Internet

What? Is disabling the adaptor too hard? I'm sure there's something for this, but uh... really..?

Or do you want to disable Internet access and still have LAN access?
 

Read other 9 answers
RELEVANCY SCORE 50.4

Hi not sure about this? is it good idea to configure Regedit to Enable in the Local Group Policy Editor?
I checked it and it says it's not configured it's not enabled either?
Do i just leave it ALONE or configure it?

A:Regedit - Enable or Disable?

Hello Puzzeld,

I would recommend to leave it set as Not Configured. Setting it to Enabled in GPEDIT will disable access to the registry for all users.

Regedit - Enable or Disable


Hope this helps,
Shawn

Read other 7 answers
RELEVANCY SCORE 50.4

Hi,

noticed the other day when I was trying to minimize what I have on my C drive ssd that the pagefile took up around 11GB and I did a Google search but I don't feel that the answer I got from there enlighten-ed me at all, I'm still wondering what to do.

/BTA

A:Disable/Enable Pagefile?

You can easily change the size of the page file to something a lot smaller than 11 GB if you are concerned about space allotted to it.

Discussing whether or not to eliminate it entirely is useless. You can find opinions on either side, with each side positive that the other side is composed of morons. "I did X and haven't had any problems...........".

Would you spend much time trying to convince someone of anything about religion? If you would, then Google and experiment all you wish with the page file. Put it on some other drive, some other partition, make it any size you want, or do away with it entirely.

But don't expect to be "enlightened". Do what you want. If you don't like the results, do something else.

Read other 4 answers
RELEVANCY SCORE 50.4

How to disable/enable viewer. Need command prompt code (s).

A:Disable/ enable viewer

what do you mean by viewer?

do you mean the start bar and my computer viewer etc?

Read other 1 answers
RELEVANCY SCORE 50.4

Our organization recently invested in a large batch of 250 G4 notebooks. I'm wondering if there's a way to quickly enable/disable the touchpad, modify something in our group policy, or distribute a driver update or something to allow for this option. Due to the environment many of our staff are working in (frequently out in the community or even operating off of mobile hotspots in their parked vehicle), many users don't use a mouse, but would like the option to turn the touchpad off while typing to avoid misplacing the cursor. Naturally, they'll need the ability to easily turn the touchpad back on without the use of a mouse in this case. As a result, I don't see navigating to the mouse settings to disable the touchpad as being a viable option, as they wouldn't have the ability to turn it back on when they were done typing. I'm used to seeing a Fn + F key option to disable the touchpad, but this doesn't seem to be available on this model. Is there a solution that would result in functionality with that level of simplicity? If not, what other options are there?

Read other answers
RELEVANCY SCORE 50.4

Hey

Does anyone know the answer to this? I have created a workgroup, my desktop and a laptop, both using XP pro accessing using same netgear router... I have created an account on the laptop (the one i was to connect to) called luke and this has been added to the admin group.

Now I login onto my desktop as luke so i figured the laptop would let me access its admin$ share? i can access the laptops basic share folder (shareddocs)... but when i try to connect to the laptops admin$ a "connect to" screen which shows the username set to "guest" which is greyed out and cant be changed! I even added guest to the admin group and set a password to see what would happen but still no difference
 

Read other answers
RELEVANCY SCORE 50.4

Greetings all.

Here's what we're working with...

Windows XP Pro SP3 machines.
Workgroup environment connected to our company domain via Sonicwall VPN devices. Each workgroup computer has a WINS entry so we can resolve names to IP's.

I can ping the PC names, but when trying to access the administrative share, the PC is not found. I know i overlooked some mundane detail, and to be honest, i need a hand since my brain hurts.

Anyone?
 

Read other answers
RELEVANCY SCORE 50.4

I have tried to enable the $ shares on a windows 7 64 bit machine in a workgroup.
i have tried the regedit that is suggested on the internet and added the Qword without sucess. Has anyone sucessfully done it?

A:Can not enable Admin Shares in a Windows 7 workgroup

Exactly what regedit did you apply?

Read other 7 answers