Over 1 million tech questions and answers.

BSOD Stop error 0x40000080

Q: BSOD Stop error 0x40000080

Working on a Dell inspiron 530 and keeps BSOD very random in nature but allways seems to occur with Mozilla Firefox on. the error code is Stop: 0x40000080
need help

Preferred Solution: BSOD Stop error 0x40000080

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: BSOD Stop error 0x40000080

Have you checked event viewer for any additional information or viewed the minidumps?How To Use the Event Viewer AppletHow to receive help diagnosing Blue Screens and Windows crashes

Read other 1 answers


A:BSOD Stop error 0x40000080(0x89CC1AD0,0x896E0DA0,0x80549COC,0x00000001)

STOP 80 errors...typically indicate hardware failure.Generic guidance is provided at http://www.aumha.org/a/stop.htm :0x00000080: NMI_HARDWARE_FAILUREThis general indication of a hardware failure is often quite difficult to pin down. Follow usual hardware troubleshooting protocols, in particular: Roll-back any recent hardware or driver changes; ensure that RAM sticks are matched and undamaged; check for viruses or hard drive damage; run ChkDsk to identify file system problems; ensure that all connections are sound inside the computer and all cards well-seated. In tough cases you may need to consult a professional shop for hardware diagnosis and repair.Let's try this.Download/install BlueScreenView, http://www.nirsoft.net/utils/blue_screen_view.html.Double-click BlueScreenView.exe file.When scanning is done, Edit/Select All...then File/Save Selected Items.Save the report as BSOD.txt.Open BSOD.txt in Notepad, copy all content and paste it into your next reply.Louis

Read other 1 answers

I get the blue screen randomly sometimes when i start sometimes whilst im on xp, this is the stop error:

0x40000080 (0x00000000,0x00000000,0x00000000,0x00000000)

has anyone any ideas what this is, ive posted elsewhere and some rekon its a driver and some rekon its my ram... can anyone be more specific ? I have the minidump file that windows created for analysis for those who are able to.


A:stop error 0x40000080 ....

Stop errors are very often memory problems. Download memtest86 or docmemory and do a complete memory check.

Read other 1 answers

Hi guys

I am Windows XP and I'm getting the Stop Error code 0x40000080

Ive attached the DMP files im getting....I'd really appreciate all the help


Read other answers

Hey guys,I recently bought a new configuration and installed Windows XP SP2,when I start downloading some file from internet the pc freezes and it comes up with this error 0x40000080 (0xff9bcb08,0xfca6d490,0xfac2c7c54,0x00000001).
It says also the problem is with some hard device driver or software,good but when it says the error is in this file: it's nothing,just blank.I've searched on microsoft website and internet but I couldn't find anything. At the bottom of the message says beginning dump of physical memory and then completed.
I checked everything,memory,driver updates but no joy.
Can anyone help!!!
the system is

AMD Sempron 2600+
Albatron KM 400 Pro integrated video and sound
80 Gb mainHDD and 40Gb second/slave
256 DDRAM PC 3200/400Mhz
Canon MP 360 printer/scanner and copy

A:Stop error 0x40000080 when downloading

go to www.majorgeeks.com and download a program called memtest86. click on the memory section on the left hand side which is where the program is located. then you can either put the program on a cd or floppy.

afterwards, reboot the computer and you will need to boot off the memtest86 which will begin the memory test immediately. you will also need to change the boot order in the bios to floppy or cdrom depending on if you put a program in a floppy or cd. let memtest86 test your memory for errors and see if you ram is faulty.

also have you installed the latest chipset drivers for your motherboard?

Read other 6 answers

I have Lenovo Thinkpad T61. I have recently installed new hard disk with windows xp professional sp 3. I have been getting BSOD with error code 40000080 quite often when I awake the machine from sleep mode.

The following are the error codes I retrieved from even viewer.

Error code 40000080, parameter1 8a47f8b8, parameter2 894731e8, parameter3 805512b8, parameter4 00000001.

Error code 40000080, parameter1 8a4ac130, parameter2 8941c508, parameter3 ba4e3e5c, parameter4 00000002.

Error code 40000080, parameter1 89a9c418, parameter2 8943e698, parameter3 805512b8, parameter4 00000002.

Error code 40000080, parameter1 8a4568b8, parameter2 8936b760, parameter3 805512b8, parameter4 00000005.

Error code 40000080, parameter1 89b16130, parameter2 8944da80, parameter3 ba4e3e5c, parameter4 00000001.

I have attached the minidump files here. Please help with this issue.

A:Stop Error Code 0x40000080

Hardware failure due to e1e5132.sys.

Intel(R) PRO/1000 Adapter NDIS 5.1 deserialized driver.

Read other 3 answers

Hi guys,
i am having severall BSOD in my Dell Laptop. Can you please help me identifying wath can be the reason for those crashes?

Thanks a lot.

Dell E6400
Windows XP SP3

A:Stop Error code 0x40000080

Your minidumps points at issues with your network drivers. Please uninstall your currently installed network drivers, remove any traces/left over files from these drivers with Driver Sweeper or Driver Cleaner Pro (both are free and easily available on internet).

Then go to Intel's site (as I believe intel drivers should fix your issue), and download appropriate drivers for your notebook (i.e. you'll have to know what is the chipset/intel NIC is on your notebook). I believe it has Intel 45 series Express Chipset, but just to confirm it you should use CPUZ.

Read other 1 answers

Hi Guys,

I am new in this forum and wish that I would take benefits of those who are expert in field of troubleshooting.
Actually, recently I started to suffer from the blue screen of death. While I am working on my PC ( HP Compaq 6910p-Windows XP SP3) suddenly it gives me the blue screen on death along with below error:
STOP: 0x40000080(0x8A4F2130,0x89D1ACD8,0x805512BC,0x0000003)
For me, the only way to fix this error by restarting the device.
It happened with me twice in three days. So, I am looking for your help to fix this deadly error.

A:Error: Blue screen of death (STOP: 0x40000080)

Waiting for your help.

Read other 2 answers

I have been getting the blue screen of death on my Windows Professional XP SP 3 machine. It gives me stop code 0x40000080. Each time it has happened, I've been doing something different: opening email, surfing the web. I have not installed any new hardware recently. I have four minidump files:

Mindump 1

Microsoft ® Windows Debugger Version 6.12.0002.633 X86
Copyright © Microsoft Corporation. All rights reserved.
Loading Dump File [C:\WINDOWS\Minidump\Mini010912-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:

"nt" was not found in the image list.
Debugger will attempt to load "nt" at given base 00000000.

Please provide the full image name, including the extension (i.e. kernel32.dll)
for more reliable results.Base address and size overrides can be given as
.reload <image.ext>=<base>,<size>.
Unable to load image nt, Win32 error 0n2
Unable to add module at 00000000
Debugger can not determine kernel base address
Windows XP Kernel Version 2600 (Service Pack 3) MP (4 procs) Free x86 compatible
Product: WinNt
Machine Name:
Kernel base = 0x804d7000 PsLoadedModuleList = 0x8055d720
Debug session time: Mon Jan 9 07:52:07.828 2012 (UTC - 6:00)
System Uptime: 8 days 18:55:32.861

"nt" was not found in the image list.
Debugger will attempt to load "nt" at... Read more

A:BSOD Error 0x40000080

From what i see...that code seems to be related to network/connectivity problems.

I would try uninstalling the current ethernet/wireless drivers...then rebooting/reinstalling same.


Read other 5 answers

Hello guys! I have big problem with blue srceen and stop error 0x40000080... My system is:

CPU - AMD Athlon 64 X2 Dual Core 4,2+ Ghz
RAM - Corsair 2Gb 667Mhz
Video - ASUS GeForce 7900 GS 256Mb (PCI Experess x16)
DirectX - 9.0
OS - Windows XP SP2
I don't see reasons to this error, I can get it in random time... help me plz!

I have attach 4 last minidumps.

PS: Sorry for my bad english, just I couldn't find solutions on russians forums. Beforehand thank you!

View attachment 18800

View attachment 18801

View attachment 18802

View attachment 18803

A:BSOD error - 0x40000080

Bugcheck 40000080 is the NDIS Driver Bugcheck (network related). All the dumps crash with this bugcheck. See if you can update the drivers for your NIC (Nvidia). If not, then try uninstalling and reinstalling the drivers.

BugCheck 40000080, {89ce3130, 89cd5120, 898cd5a4, 1}
Probably caused by : NVENETFD.sys ( NVENETFD+535c )
Image path: NVENETFD.sys Image name: NVENETFD.sys Timestamp: Fri Jan 27 02:22:32 2006 (43D90558)

Read other 2 answers

I have read multiple postings about folks spend hours on the phone with Dell about Blue Screens of Death and Inspiron 530. I too bought a Dell Inspiron 530 - the First machine, after installing my lexmark printer 3400 driver not only gave me blue screens but memory issues with the windows desktop not painting correctly and icons missing! So I called Dell and they told me how reset the machine back to the factory settings...but I still encountered the Blue screen of Death even after that and then going to standby/hibernation and coming back - clicking to yahoo and checking mai! Boom Blue Screen every time! I called Dell and they replaced the machine with another Dell Inspiron desktop 1 week ago. I hooked up the new one and the same exact thing has happened - I restored the settings again and have already had the dreaded blue screen Stop error code 0x40000080 even with out now installing anything related to a printer!!! all while coming back from hibernation! So what I have read here is to get around this issue is to never let the machine got to standby or Hibernation is that correct?? or do I need driver updates! why in the world I would need new drivers when this is a brand new machine!!! HELP in CT!


A:Dell Blue Screen Stop Error Code 0x40000080 with Dell Inspiron 530

Go into your Device manager and see if there are any conflicts/issues noted by a yellow triangle with and exclamation mark in the center.

You are the second person here today with a DELL computer and 0x80 errors.

Read other 17 answers

I've been recieving these stop errors since yesterday and the only think i installed new was the windows live messenger the latest one- 14 and upgraded bbc iplayer.

It says the following file has caused this problem but doesn't list which file and just lists this stop error. I recieve it when i wake my machine up from standby and hibernate. Any ideas what the problem is?


If you weren't receiving any stop errors before the updates and you are receiving them now it is a good bet the issue lies with your updates/installs.

Read other 1 answers

ok so im getting the blue screen of death and i am all out of ideas. the stop code is.. STOP: 0X40000080 (0X866203D0, 0X8623D698, 0XF7A3B8E8, 0X00000001)
i've spent every waking hour of last 2 days trying to figure out what to do, i have reinstalled windows xp 3 times(through safe mode sense i get the blue screen in the middle of the windows loading screen otherwise). i have tried reinstalling my graphics card and mobo drivers, but when i try at some point in the installation it says im either missing the graphics card or some error i dont undstand for my mobo. i have opened up my comp and made sure everything is sucure (which it is). and i have spent hours googling the stop code but i can't find anyone with the same problem as me.
i starting getting the blue screen randomly when i opened up mozilla at one point the other day. i wasn't running alot on my comp, only mozilla.

i built this comp from scratch about a year and a half ago and it has been running wonderful sense.

i read something online about reseting bios or something but i don't understand what that is really, (im not too savy with the really technical stuff)
(this is the first time i've ever had to post on a board for help, ussually i can google my way around problems )
if someone could help me i would be incredibly greatful!

A:Blue Screen Halp! Stop: 0x40000080

See if you can update the driver for your NIC. Bugcheck 40000080 is the NDIS driver bugcheck.

Read other 2 answers

I keep getting a BSOD with error 0x400000080 and the other numbers are different .
I have attached the minidumps.

I have an Acer Aspire 7730zg laptop.

A:BSOD 0x40000080... on XP SP3

You are missing some drivers. Did you recently re-install XP?
These are reflected in the minidumps:

Agere Systems modem driver
Atheros wireless driver
Blutooth driver

You may need to go to Acer Support and re-install these drivers

Read other 5 answers

I just recently formatted my laptop but I've been getting this crash message after installing drivers. I already tried to reinstall drivers from the CD, but still getting BSOD. I also attached the minidumps. Thanks in advance for your help.

0x40000080 (0x89B83820, 0x88F04A80, 0x89108F68, 0x00000001)

Read other answers

so i got the 0x40000080 (0x8660C710, 0x886a82508, 0xF7a4ef30, 0x00000001) error
i try\ed to reinstal windows xp twice already ,i got nowhere to go,and i cant finde minidump folder in windows,what should i do?
please help

A:BSOD 0x40000080 problem


Do the following to enable Minidump Files to be created:

1. Right click My Computer > click Properties > click Advance tab

2. The Advance Screen at the bottom right has Error Reporting. Click this on.

3. Click Enabled error reporting and also check both boxes underneath: Windows operating system and Programs.

4. Now click Choose Programs and click All Programs. Then click Okay and that screen will close. At the next screen click Okay and that will close.

5. You are back to the Advance screen. Find the Start up and Recovery which has underneath it System startup, system failure, and debugging information. Click the Settings box.

6. Another screen will open. You want the System failure section. Enable all three boxes.

7. Under these boxes is Write debugging information. Choose the option Small memory dump (64kb). Click OK and that screen will close.

8. Click OK one more time and you'll be finished. Now the ability for your system to write minidumps should be enabled.


How to find and post your Minidump Files:

My Computer > C Drive > Windows Folder > Minidump Folder > Minidump Files.

It is these files that we need (not the folder). Attach to your next post the five most recent dumps. Notice the Manage Attachments button at the bottom when you go to post the next time. You can Zip up to five files per Zip; if you only have one or two you don?t need to zip them, just attach as is. Please do us a favor ... Read more

Read other 1 answers

Hey guys,I'm getting this error stop with dump of physical memory.I'm looking a week now and can't find anything.Please someone to advise me
I've run all sorts of checks,what I need to know what does this stop error mean,because I found someone explaining it has something to do with Explorer and online printing???
stop error 0x40000080 and the 3rd and 4th lines are
Par 3 fa2c7c54
par4 00000001
I've posted in a couple of forums but no joy yet

A:stor error 0x40000080,HELP!!!

Read other 10 answers

As per Kimsland I have updated my profile with my system specs. I am attaching my minidumps and information in my event view (zipped of course). I had confirmed drivers and ran virus scan per instructions as well. I am tired of dealing with Dell (when I do finally get them) because they obviously have no clue as to the extent of their problem. I like my computer but may have to resort to return with help from American Express. Any assitance would be greatly appreciated. Dell has only had me peform a PC Restore, delete minidump files, removed and reinstalled security software and several other obviously procedures that waste time.
Thanks again for your help.

A:Blue Screen Error 0X40000080 on my Dell 530S

more minidump attachments

My previous post filled things up. Here are more minidumps

View attachment 29763

View attachment 29764

Read other 6 answers

Occasionally, the computer will freeze up and make the "dieing" clicking noise, with the hard drive working furiously. Usually, I preform a hard reset, but on two occasions, I let the computer run, and I recieved similar blue screens of death, with the hard drive access light solid.

The first:
...(usual info on what may have caused error, how to start safe mode, etc)
*** STOP: 0x0000007A(0xC03E11F0,0xC000000E,0xF847CC22,0x009A2860)
*** atapi.sys-Address F847CC22 base at F846D00, DateStamp 3db88971
Beginning dump of physical memory.

The second:
*** STOP: 0x0000007A(0xC03E17C4,0xC000000E,0xF85F1642,0x0B486860)
*** ftdisk.sys-Address F85F1642 base at F85E7000, DateStamp 3b7d8419
Beginning dump of physical memory.

On the next occasion, I was trying to replicate the error after a day of no trouble, and did so by entering standby mode, then starting the computer back up. Surprisingly, I got this after saving a file(which, btw, didn't save)

*** STOP: 0x00000077(0xC000000E,0xC000000E,0x00000000,0x009520000)
Beginning dump of physical memory.

After the error messsage, the computer auto-restarts, and runs really slowly, requiring a shut-down, wait a minute, start-up

According to microsoft, the second parameter in each of these is the status (http://www.microsoft.com/resources/d...d_stp_fvlq.asp), and 0xC000000E is STATUS_NO_SUCH_DEVICE. I have run mulitiple test... Read more

Read other answers

Hi guys,

I was using my computer today and for the first time ever (had computer for 10 months) I had a BSOD. Here is what I found. Anyone have any thoughts?

FAULTING_MODULE: 81c00000 nt


WHEA_ERROR_RECORD: !errrec ffffffff849784e0

BUGCHECK_STR: 0x124_GenuineIntel


WARNING: Stack unwind information not available. Following frames may be wrong.
81ceef84 81fa6f1f 00000124 00000000 849b3578 nt+0xd8681
81ceefa0 81cced6a 849b3578 84ac2de8 00000001 hal+0x5f1f
81ceefc0 81fa6ede 84ac2de8 84ac2f00 81ceeff4 nt+0xced6a
81ceefd0 81fa6fff 00000003 84ac2de8 00000000 hal+0x5ede
81ceeff4 81fa389f 8014a000 00000000 00000000 hal+0x5fff
00000000 00000000 00000000 00000000 00000000 hal+0x289f



MODULE_NAME: hardware

IMAGE_NAME: hardware


Followup: MachineOwner

A:windows vista bsod STOP error (error posted)...any thoughts?


Originally Posted by ajcool123

Hi guys,

I was using my computer today and for the first time ever (had computer for 10 months) I had a BSOD. Here is what I found. Anyone have any thoughts?

FAULTING_MODULE: 81c00000 nt


WHEA_ERROR_RECORD: !errrec ffffffff849784e0

BUGCHECK_STR: 0x124_GenuineIntel


WARNING: Stack unwind information not available. Following frames may be wrong.
81ceef84 81fa6f1f 00000124 00000000 849b3578 nt+0xd8681
81ceefa0 81cced6a 849b3578 84ac2de8 00000001 hal+0x5f1f
81ceefc0 81fa6ede 84ac2de8 84ac2f00 81ceeff4 nt+0xced6a
81ceefd0 81fa6fff 00000003 84ac2de8 00000000 hal+0x5ede
81ceeff4 81fa389f 8014a000 00000000 00000000 hal+0x5fff
00000000 00000000 00000000 00000000 00000000 hal+0x289f



MODULE_NAME: hardware

IMAGE_NAME: hardware


Followup: MachineOwner

Hi. . .

A bugcheck of 0x00000124 = 0x124 indicates that a fatal hardware error has occurred. The reference to WHEA is Windows Hardware Error Architecture. There is an event log for WHEA, under Applications and Services\Microsoft\Windows\Kernel-WHEA. It usually contains entries stating that WHEA was successfully initialized, that x# error sources are active and the record format of WHEA. I have never seen any other entries in it b... Read more

Read other 2 answers

I'm not quite sure what the cause of this bsod is. It just happens randomly every other day or so at night.
Thanks for taking a look.

A:BSOD randomly, every other day or so. Error bsod stop: 0x0000007a

Free up the startup. Windows does not need any other program to auto start with it, but the auto start programs often conflicts and causes various problems including BSODs.
Click on the Start button
Type “msconfig (without quotes), click the resulting link. It will open the System Configuration window.
Select the “Startup” tab.
Deselect all items other than the antivirus.
Apply > OK
Accept then restart.
Update the USB3 driver from GIGABYTE - Motherboard - Socket 1155 - G1.Sniper M3 (rev. 1.0)

Make it sure that the SSD is having the latest firmware. Samsung SSD Downloads | Samsung SSD

Let us know the results. Also report us for any further BSODs after doing those.

By the way, disabling hibernate would be good for you.

BugCheck 7A, {20, ffffffffc000009d, fffffa8007ef5078, 0}

Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+4fb00 )

Followup: MachineOwner

BugCheck 9F, {3, fffffa8007a80c00, fffff80000ba0748, fffffa800b7654c0}

*** WARNING: Unable to verify timestamp for iusb3hub.sys
*** ERROR: Module load completed but symbols could not be loaded for iusb3hub.sys
Probably caused by : iusb3hub.sys

Followup: MachineOwner

Read other 1 answers


A few days ago I got a random BSOD with the 0x0..1E stop error. Now my computer will rarely boot and when it does it still randomly gets the same BSOD. I once got a 1D stop error but its mostly 1E that keeps happening. I run Windows 7 Professional 64-bit and this time I used a Windows DVD to start up my computer. One time and only one I got the error message (while booting the computer) "BOOTIMGR corrupt, system couldnt boot" or something like that. I restarted my computer after I saw that and it was gone. I've attached two ZIP files of two different .dmp files that were created today with about 15-20 minutes in between them. Is there something wrong with my bios? If not, what could it be?

Thank you for any support, greatly appreciated

A:Random BSOD stop error 0x0000001E, hardware error?

Also maybe worth noting that I had not updated drivers in a while, right after posting this I updated my monitor's drivers. The rest were up to date.

Read other 3 answers

I recently bought this computer that had windows 8 and so I installed window 10, it's an hp pavilion 15 p133d, and it was fine for like the first day and I've had it for 3 nowAfter I installed windows 10 it started crashing and going to the blue screen frequently I got a different error each time for example, a few I saw wereSystem_service_exception (dxgmms1.sys)0xc0000096System_thread_exception_not_handledPage_fault_in_nonpaged_areaWin32kbase.sysIrql_not_less_or_equalThis stuff happens on the blue screen and half the time I'm not even doing anything like twice it did this while I was on Skype and then another time while nothing was up and it was just sitting on the home screenSo I started looking up how to fix it and I went through, defraged and optimized it, then did a memory scan to see any faults and there was none, I did the updates to the card and driver and what not and all of that stuff is already updated, I even looked for anything nvidia related as its been said to have been a problem but that wasnt there either.Could it be an internal issue? Or how would I know if windows 10 was installed improperly or became corrupt for some reason?So I'm really hoping someone can help because I really like this laptop and I don't wanna have to get rid of it but I have legit no clue what's goingThanks

Read other answers

Hello all, first time poster, so I apologize if there is any mistakes in this posting.

I am having an issue where every time I try to login to my computer, I am getting a blue screen, and after about 4 seconds the computer restarts. Sadly, I can't read fast enough to get the jist of the problem.

The computer itself is one that I built at home, and I'll leave the specs at the bottom of this post.

I have not installed any new hardware at all in the last few months and I have disconnected/reconnected all hardware and tried rebooting to no avail.

I have managed to login using the safe mode, but since I can't connect to the internet in safe mode, I can't download the various BSOD steps that are listed on this site.

During the multiple attempts I've made to figure this out on my own, I've noticed that my system seems to slow down considerably while booting up.

I have tried using the system restore and gone back as far as 5 days ago but that failed to fix the problem, as well.

Any suggestions on what could cause this? Any help is very much appreciated! Thanks folks!

Computer specs:

OS: Windows Vista 64-bit (Full retail version)
CPU:AMD Phenom 9950 Quad Core
Video card: ATI Radeon 4850
Motherboard: MSI K9A2 Platinum

A:Stop Error/BSOD?

Hi -

Download this app and save it - http://jcgriff2.com/0x2/Windows_NT6_..._jcgriff2_.exe

Copy it to USB stick. Boot into SAFEMODE on other system, copy the EXE to Documents folder and run it.

Output = newly created folder in Documents Windows_NT6_BSOD_jcgriff2

Output folder --> USB --> system you're on now; zip it up and attach to post.

Regards. . .



Read other 9 answers

I am currently running Windows XP Home Edition. My son attempted to install Office 10 on it and during the install, it crashed and I have been unable to boot it since.

Initially, I was able to get to the Startup Repair screen, where I tried to do a System Restore. The restore ran for 28 hours before I finally shut the computer down and now, I get the BSOD with the following error message when I boot.

The stop error message I get is:
stop 0x0000c1f5

Can anyone help me? I have access to an external docking station so I can remove the hard drive if need be. I need the files off the PC for school and am desperate.

Thanks for any help of any kind.

A:BSOD, Stop Error, and more

That error seems to be Vista-related...and XP doesn't offer a "startup repair" while later versions of Windows do.


System manufacturer and model?


Read other 7 answers

I have a friend's laptop - Dell XPS M140 running XP Media Center.
If I start the machine normally, I get the following BSOD

Stop: 0x0000008E (0xC0000005, 0xF74B471D, (the next two differ each time)

Atapi.sys - address F743471D, base at F74AA000, datestop 4802539d

It does a quick memory dump...

If I start in safe mode, I don't get this error.

I have run and removed all viruses and Malware with avast, malwarebytes and advanced system care 4.

I'm at a loss here.

Thanks in advance, Ilene

A:BSOD with stop error

Read other 14 answers

Following is what happened yesterday afternoon or close to it. Hope that I have made it clear and apologies if not.

Booted up and after a few minutes cursor "froze" on screen and shortly after BSOD. Screen of text. "... If this is the first time etc..." Shut down.
Rebooted OK for about 20 mins then PC shut down and rebooted.
Shortly after BSOD. Error message on screen 0x0..0F4 (a..a, b..b, c..c, d..d) Unfortunately it went into reboot before I was able to get the rest of the digits.

On rebooting several times after that I experienced:
during boot up it would "freeze" on detection of IDE 3rd Master hard drive (which is my system drive. Note I am using SATA drives) and/or at 3rd Master it would comment "SMART Capable Command Failed" and/or if it got past that "Trouble/difficulty loading OS" (or something similar to those words).

Tried using Seatools, unfortunately it would not boot that far to allow me to test the drive (or it was taking so long to detect the drive that I gave up waiting anyway).

I have a master drive that I have for emergencies and for cloning etc. I unplugged the data cable from the problem drive and plugged it into this master drive but used a different power connector. And everything booted up OK and this is what I am using now. I have 2 other internal drives. Drives 2 and 3 I left untouched and they appear to be functional.

I rebooted after disconnecting drives 2 and 3 and reconnecting the problem ... Read more

Read other answers

There where a couple more but I forgot them off hand. Well the low down is that I have recently taken over this computer from a co-worker. I know that it has been BSODing sense at least july.

Basic specs are as follows:
Windows 7 64 bit
Intel Core2 Quad CPU Q6700 @ 2.66GHz 2.67GHz
6G of ram, 2x 2gb DC, 2x 1gb DC
522GB of 596GB hard drive
Original OS was Windows Vista 64-bit home premium SP1
I don't know when WIN7 was installed.
nVidia GeForce 8600 GT
Not sure about the MB, i know its a Gateway, DX4710-UB301A

I'm afraid I can't reinstall my OS seeing as I don't know where the disk is and there is information on this computer that cannot be lost.

The main program that I use is called SolidWorks 2010. This is a CAD program and I know it takes up a lot of memory. I have a laptop with lesser specs and it runs the program just fine.. its the same install as the one on this machine.

Laptop specs:
Windows 7 OEM 64-bit
4G ram
30G free of 250G hard drive
Dual Core 3GHz(I believe) processor

The blue screens happen when I'm working with solidworks mostly, but that's probably because I am on SolidWorks for the majority of this computer's operation.
It also happens when I'm doing other things like trying to change Max VM under advanced system settings.
The Infrared device I've just disabled to see if it'll help.

Help would be appreciated.

A:BSOD: STOP ERROR's 1A, 1E, and 4E


upgrade it

best value


Read other 19 answers

last night a house power go out then on then out then on in a matter of 2 minutes computer was on at the time and plugged in to a surge protector. started pc later and got bsod with message stop: 0X0000008E ( 0XC0000005,0XBF80FD94,0XF87B77DC,0x00000000)
win32k.sys-address BF80FD94 base at BF800000 date stamp 4341dcff
I have tried last know good config and safe mode but only get bsod

It has xp home with out service pack 2
plenty of hard drive space

would much appreciate anyones help

A:bsod stop error

Maybe some windows files are corrupt, try running the check disk utility and the recovery console to check if that is the case

Read other 3 answers

Okay I have a weird delima and I could really use so info on how to ts the problem.okay firstly I only get the bsod well playing watch dogs and the witcher 2. I've updated my drivers.to the 344.11 nvidia driver. So I first thought it was the gpu cause it would bsod pretty often lately.bit since the new driver I've only had 3.they have stopped and now im getting a pop up and game shutdown saying kernel driver failed and was successfully reinstalled.so im puzzled.so I got blue screen view it says I have a stop code 10d the files associated with it are ntoskrnl.sys , wdf01000.sys ,and win32k.sys .so im no programmer so idk what im looking at besides a driver and a kernel conflicting. I can upload a dmp file if needed.I just don't have internet on my desktop so I will have to transfer the dmp to my phone then here. So if anyone could help me it would make my day and probably many others as well..

A:bsod stop error 10d

Click on the button below ....

It will download the DM log collector. Right click on the application and run as administrator. It will generate a .zip file on your desktop. Upload the .zip.
Screenshots and Files - Upload and Post in Seven Forums

Read other 1 answers

Hi there...

We have been having this problem for some time and i've tried to do some research however, most of it goes right over my head.

About 45% of the time when we boot up the system we get the Blue Screen of Death with this stop message.

STOP: 0x0000008E (0xC0000002, 0x8054A1A1, 0xEE1EA590, 0x00000000)

I've read everything from a Ram error to a problem with Norton...


A:BSOD Stop Error..

See if anything here will be of any help.

Read other 2 answers

STOP: 0x00000024 (0x00190203, 0x825827D0, 0xC0000102, 0x00000000)

A:What does this BSOD Stop error mean?

From auhma.org:

0x00000024: NTFS_FILE_SYSTEM
A problem occurred within NTFS.SYS, the driver file that allows the system to read and write to NTFS file system drives. There may be a physical problem with the disk, or an Interrupt Request Packet (IRP) may be corrupted. Other common causes include heavy hard drive fragmentation, heavy file I/O, problems with some types of drive-mirroring software, or some antivirus software. I suggest running ChkDsk or ScanDisk as a first step; then disable all file system filters such as virus scanners, firewall software, or backup utilities. Check the file properties of NTFS.SYS to ensure it matches the current OS or SP version. Update all disk, tape backup, CD-ROM, or removable device drivers to the most current versions.

Read other 1 answers

Hi everyone. I hope that someone may help me as i am at my wits end. My proble started two weeks ago when I tried to boot my Dell one morning. I got the Blue Sceen of Death, Stop Error: 0x0000007B. Afetr about a week fof tring to solve this error, both throught the computer guys at work and Microsoft support I had decided to just buy a new hardrive and start from scratch. i believed that I had a boot sector virus as I was unable to re-install XP. I bought a new SATA Seagate 80G drive. The drive is found on my BIOS. When I try to install the OS I can get to the wecome to xp professional setup. When I 'enter' to install XP now, I get the meassage "windows has found no hardrive on your system. Seagate suggested that I hit the F6 key on XP setup to have windows find the driver but setuo says that "setuo could not determine the type of one or more mass storage devices installed on your system...etc. then I went to Seagates website and downloaded the Seagate hardrive setup files to a floppy disk. When I boot from that floppy I now get the message:
" Cant load BDOS kernal file:A:\IBMDOS.Com"
System halted. Sorry this is so long but my intention was to try and avoid any of the obvious suggestions. Any help would be geatly appreciated!

A:BSOD Stop Error

If I'm understanding you correctly...

You don't want to boot from floppy you just need the Hard Drive drivers on floppy. During the XP install click F6 and then insert the floppy with the drivers so Windows can use them during setup.

Read other 1 answers


I have just installer a brand new PC and I get a BSOD once a day. The error logged by the event viewer is the following :

The computer has rebooted from a bugcheck. The bugcheck was: 0x100000d1 (0x00000000, 0x00000002, 0x00000000, 0x00000000). A dump was saved in: C:\WINDOWS\Minidump\Mini101105-01.dmp.

When the system reboots, I get a message from WinXP saying it has recovered from a fatal error.

I attach 2 minidumps from the crash. If someone could help me identify the culprit...

Thanks everybody,


A:BSOD - STOP error - please help

Hello and welcome to Techspot.

From only two minidumps, it`s hard to be 100% sure. If you have more minidumps(5, or 6), attach them here so that we can hopefully confirm the culprit.

Both of your minidumps crash at tm_cfw.sys. This is part of your Trend security software.

Try uninstalling, and reinstalling the software. Check for any updates, or patches.

If that doesn`t work, then try using a different security product.

AVG free, and the free Sygate firewall both come Highly recommended.

Please let us know the outcome.

Regards Howard :wave: :wave:

Read other 2 answers

I can't seem to finish a game of Civilization V because my computer gets a STOP 124 BSOD error as the game progresses.

Things I notice about this error include my computer getting abnormally hot when the error occurs. Note that no other games such as League of Legends, any MMORPG's, or any of my owned steam games cause this issue.

Code looks as follows:

STOP: 0x00000124 (0x0000000000000000, 0xFFFFFA8002990028, 0x00000000B64A4000, 0x0000000000000135)

A:BSOD Civ 5 Error STOP 124

BugCheck 124, {0, fffffa80031f8028, b6472000, 1a000135}
So the first parameter which is null indicates the machine check exception which means the CPU has found the hardware error and has bugchecked, this is normally the case with 0x124s.
The second parameter is the address that contains the WHEA error record which should give us insight into the cause of the error.

3: kd> !errrec fffffa80031f8028
Common Platform Error Record @ fffffa80031f8028
Record Id : 01cf93c95694ec87
Severity : Fatal (1)
Length : 928
Creator : Microsoft
Notify Type : Machine Check Exception
Timestamp : 6/29/2014 20:39:44 (UTC)
Flags : 0x00000000

Section 0 : Processor Generic
Descriptor @ fffffa80031f80a8
Section @ fffffa80031f8180
Offset : 344
Length : 192
Flags : 0x00000001 Primary
Severity : Fatal

Proc. Type : x86/x64
Instr. Set : x64
Error Type : Cache error
Operation : Data Read
Flags : 0x00
Level : 1
CPU Version : 0x0000000000100f53
Processor ID : 0x0000000000000003

Section... Read more

Read other 7 answers

Wind XP SP3, Win Pro, I am getting stop error 0x0000007e (0xc0000005, 0xb85D7184, 0xba516D44, 0xba516A40) right after windows starts. I can still Safe boot. I have redone the image of all of the C: drive to a date prior to the start of the BSOD - still failed. I did a rebuild/reinstall - still failed. I now am back to my current config. still failing. I am not getting any dumps - I have rechecked the setup for the dumps and it appears correct. I get no yellow ! in device manager. PLEASE HELP with any suggestions.

A:Stop Error and BSOD

If you have reimaged the drive to a state when the issue did not occur -- and it still does -- you are probably looking at a hardware fault. From some of the error parameters I suspect a video card fault.

Generic coverage of the error type here >> http://aumha.org/a/stop.php#0x7e

Did this problem begin with the install of SP3? I didn't know it was out -- but see it was made publicly available a couple of days ago.

Are you sure you have the dump configuration set properly? Run sysdm.cpl and look at Advanced > Startup and Recovery.

SMALL minidump should be selected and %systemroot%\minidump the "save to" directory.

When dumps are not being created it is an indication that the fault is occuring very early in the boot process. Try removing all unnecessary cards and devices. If you have onboard video -- try enabling that instead of an installed card

Since almost all bugchecks can be caused by faulty ram, I would recommend you perform memory tests.

Beginners Guides: Diagnosing Bad Memory
Memtest86 - A Stand-alone Memory Diagnostic

Read other 2 answers

Judging from what little that I found Googling, I doubt that this question is going to do very well, but I shall try regardless.

The OS is crashing when viewing a flick in TVU Player. So far, this is the only time this occurs, I can watch a variety of other video apps without any problem (knock on wood). What I did find searching seemed to point to a general concensus that the root of the problem was the Nvidia driver, but those posts were over a year old, and I would hope that Nvidia would have gotten it straight by now.

The process mentioned in the BSODs is nvlddlkm.sys, which obviously is part of the nvidia drivers. I'm currently using the latest Nvidia driver, and it didn't sound like going back to an older driver was likely a solution.

Since this appears to only effect TVU Player, one might think that it is the culprit, but I have tried several different versions of it without an improvement. Bottom line is whether anyone has any relevant suggestions, other than just stabbing in the dark?

A:Stop Error 116 BSOD

Quote: Originally Posted by seekermeister

Judging from what little that I found Googling, I doubt that this question is going to do very well, but I shall try regardless.

The OS is crashing when viewing a flick in TVU Player. So far, this is the only time this occurs, I can watch a variety of other video apps without any problem (knock on wood). What I did find searching seemed to point to a general concensus that the root of the problem was the Nvidia driver, but those posts were over a year old, and I would hope that Nvidia would have gotten it straight by now.

The process mentioned in the BSODs is nvlddlkm.sys, which obviously is part of the nvidia drivers. I'm currently using the latest Nvidia driver, and it didn't sound like going back to an older driver was likely a solution.

Since this appears to only effect TVU Player, one might think that it is the culprit, but I have tried several different versions of it without an improvement. Bottom line is whether anyone has any relevant suggestions, other than just stabbing in the dark?

Can you go into c:\windows\minidump, zip the dump file, and upload it to us for debugging? We may find out some additional info

Read other 5 answers

I have a Dell Inspiron 8600 and occasionally I get a stop error with reference to "HSSHWICH.SYS" as the culprit.

Can anyone tell me what system file this relates to? I image there is a hardware conflict somewhere, but the laptop is only a month old. Dell has no information regarding this error.

Your help is much appreciated,



Can you give us more specific info about the error message.With vague info like you have given us,noone can help you.

Can you copy/paste or give us a screenshot of the error message ?

Read other 1 answers

I have been experiencing random spontaneous BSOD stop errors. The computer will go to BSOD from idle, not being used. Usually it is DRIVER_IRQL_NOT_LESS_OR_EQUAL
STOP 0X000000D1
The drivers most commonly idenified are usbport.sys and win32k.sys

I've run memtest over night without any reported errors.

I've attached (I think) 3 minidumps. If anyone can shed some light on this I would be very thankful.

Win XP Pro SP2
ASUS a7N-e deluxe
512 MB Mushkin PC4000 daul channel
nvidia 6600

Latest drivers and updates including bios.

Thanks, monton

A:BSOD stop error

Your minidumps have not been attached.

Before you try to attach any more minidumps, go HERE and follow the instructions.

If that doesn`t help, then by all means attach your minidumps.

Regards Howard

Read other 6 answers

Alright, new BSOD error on a laptop of mine!

Error is the following:

"STOP: c000021a {Fatal System Error}
The Session Manager Initialization system process terminated unexpectedly with a status of 0xc000026c (0x00000000 0x00000000).
The system has been shut down."

Where to from here?

A:BSOD Stop Error

Hi -You do not mention if this is regular or just a one off BSOD - If you are posting from the problem PC it may be a simple problem.First, it would not hurt to run a chkdsk /r from Start > Run box , and see if this clears / finds any problems and take it ftom there.Also ensure that you are running a current version of your browser, and all M/soft updates are installed -As always, please post back if any of these ideas do not help, since others will have more ideas -Regards - EDIT - Also worth reading if you know a bit about computers -

Read other 60 answers


When I start my PC, on the Login Screen or sometimes just after login, when I reach the desktop, I get a BSOD with Stop Error message as follows :
YOur computer has been shut down to prevent damage...blah,blah, blah..
Stop : 0x0000000A (0x00000166, 0x00000002, 0x00000000, 0x804F5BC0)"

If I restart 2-3 times, it goes away & there is no problem. Also it does not happen each time I start the PC, but at random.
Can anybody help.

A:BSOD with STOP Error

Read other 8 answers

Stop 0x0000000A (0x00000000, 0x00000002, 0x00000001, 0x804DC11D)

First time this happened it was a couple days ago. I had Windows XP home edition service pack 3.

I couldn't figure out the problem and ended up reformatting my C: drive and all seemed well. Then alluva sudden the error started again.

It starts a minute after I log into my desktop, then after that I get to the windows boot screen and it errors to the BSOD.

I'm going to check to see if it's my wireless cards or my graphics card, which I hope it isn't. This is my third one within the last year... My computer is eating them... =(

Each time it's the same exact error, so I know it's coming from the same source. And I don't know how it'd be a virus as I have a virus scanner. All I can hope for is that it's something I can fix for a couple of months without constant reformatting or wiping my D: drive as there's some stuff on there I need and don't want to spend a whole day backing stuff up.

Any insight into this problem would be appreciated. And I can't log in to get a minidump. The stop error is all I have.

EDIT: i checked the PCI cards (my gfx and 2 wireless cards) by taking them out and the problem still persists. i've also checked the RAM sticks the last time this happened by removing one and trying it. the problem persisted. i'm thinking it may be motherboard or harddrive related... which i'm dreading.

------------... Read more

A:BSOD Stop error! Please Help!

Read other 6 answers

Tried installing USB combo 2.0 card, (adapter and front panel) in Dell 4100 Dimension PC with Windows XP. Bios dosen't support 2.0 Installed Roxio also. I think the 2.0 and Roxio didn't work together. Took out 2.0 combo card and set bios back to 1.1. USB worked fine after that. When re-boot for Roxio install, wouldn't reboot. Windows logo came up then blue sceren of death flashed so fast I couldn't read it. Then safe mode options came up. Rebooted in safe mode over and over, also safe mode with networking to uninstall Roxio with disk. Wouldn't uninstall, no internet. Finally wouldn't reboot in safe mode, froze on driver screen. Ran xp cd repair.Wouldn't finish install. Stop error 0x000000CE etc. Cdr4_XP.sys Driver Unloaded Without Cancelling Pending Operations came up and froze there. Cannot get back to Windows to finish uninstallation of driver. Manually turned off pc. Anyone ever had or heard of this before. Would like some tips. Also deleted Roxio from registry before final reboot. Please help. Still will not reboot in any options. Thank you for your input.

A:Stop Error, BSoD


To work around this issue, reinstall updated DirectX device drivers that are designed to work with Windows XP.

If the Windows XP CD-ROM does not include device drivers for your device, look for updated drivers on the Microsoft Windows Update Web site. If updated drivers are not yet available there, look on the device manufacturer's Web site, or contact the manufacturer by phone to ask about updated drivers.

Read other 2 answers

STOP: 0x0000001E (0xc0000005, 0x804B7AD7, 0x00000000, 0x00000004) KMODE_EXCEPTION_NOT_HANDLED
Address 804B7AD7 base at 80400000, Datestamp 45sec3c8f - ntoskrnl.exe

OS: Windows 2000 SP4

Several entries have been made re: this error. Is there a clear resolution?

A:BSOD - Stop 1E Error

Read other 6 answers

getting bsod Stop-0x0000007E (0xC0000005, 0x8737F48B, 0xF7A51C50, 0xF7A5194C)

A:Bsod stop error

You tell us nothing about your system's hardware, OS, security software, how old it is and when the BSODs started and whether or not they are random or if they only occur doing certain things.

Here is your error and as you can tell it can be due to many things:

A system thread generated an exception which the error handler did not catch. There are numerous individual causes for this problem, including hardware incompatibility, a faulty device driver or system service, or some software issues.

Read other 1 answers

Hi all,

I need some help here. Recently upgraded my PC with a new CPU. Keep getting crashes every 10 minutes. I'm thinking it might be CPU or PSU. Any help?

Read other answers