Over 1 million tech questions and answers.

HP Elite Thunderbolt 3 Dock Admin Settings

Q: HP Elite Thunderbolt 3 Dock Admin Settings

Hi All Could really do with some help on this. We are gonig to be using the HP Elite Thunderbolt 3 Docking Station with our laptops. The issue I am finding at present is that you have to authorise for use on each laptop. This requires Admin Rights, something that we are no going to give our End Users. According to the manual located at: http://h10032.www1.hp.com/ctg/Manual/c05141189, on page 5, "Note: You must be logged on as an administrator on the computer connected to the dock. To enable a non-administrator user to select OK, enter the non-administrator registry key. Contact your HP Technical Consultant for this key." Does anybody have any idea what the key is? Kind Regards

Read other answers
RELEVANCY SCORE 200
Preferred Solution: HP Elite Thunderbolt 3 Dock Admin Settings

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

RELEVANCY SCORE 96.8

Hi, I have just received the HP Elite Thunderbolt 3 65W USB-C Dock. I have plugged it in, and my Elite X2 1012 G1 charges, but that is all. None of the ports are working. Monitor is not recognised either. If I plug my phone in via the USB port, it will charge, but not recognise it as a storage device. I have searched everywhere, and cannot find drivers that will resolve this issue. I have:- Thunderbolt software installed, and running, but still to no avail.- Installed and run "Intel Thunderbolt Firmware Update Utility", but get an error that there is no controller driver. Please help. ps. The machine was reimaged with a corporate SOE. So I am not sure if I am missing drivers. 

A:HP Elite Thunderbolt 3 65W USB-C Dock not working on Elite X...

I finally received our Thunderbolt 3 docks this week.  Same issues as OP.  I was able to get it working by installing the Intel Thunderbolt Secure Connect under the Driver - Controller section of the drivers for the X2 1012 tablet.  Hopefully this helps someone else.  Direct link to the driver page below. http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=8741946&swItemId=ob_161921_1&swEnvOid=419...

Read other 6 answers
RELEVANCY SCORE 92.4

hello, we have a brand new spectre. first the device is amazing, i love it. but we have the following problem with the  HP Elite Thunderbold 3 65W Dock, if the Spectre is connected over Thunderbold Cable and on the Dock with Thunderbolt/Power combination cable connector, One 4.5mm power input every Device is working, Network is working, USB, both Display Ports are working, but the Spectre does not charge. i have installed the newest FIrmware Update  for the Thunderbold Dock Driver and i have updated BIOS, Intel Thunderbold Drivers on the Spectre. We have changed also the Thunderbolt 3 Dock with an new one, same problem.  one thing, on the front the light is off and i cannot turn on the spectre with the button.  any ideas, hints??? and yes i have connected the spectre over one of the 2 thunderbold ports, because the spectre has only 3 usb-c ports but 2 of them have thunderbold technology. i see also that the tb3 dock is recognized in windows at the thunderbold software.  kind regards, sebastian   

Read other answers
RELEVANCY SCORE 91.2

I have exactly this issue (exame same symptoms) with a G17.Happens even if there are no peripherals attached to the docket. Was on .09 of the BIOS, upgraded to latest, no change. Have updated all HP and Intel drivers and utilities. Also removed graphics drivers in safe mode and reinstalled clean, no change, and performed an sfc /scannow.Was working fine week before last, no idea what changed to cause this. 

Read other answers
RELEVANCY SCORE 91.2

I recently (yesterday, 16/08/16) started experiencing the dreaded Blue Screen of Death whenever my laptop is connected to my HP Elite Thunderbolt 3 Dock. The machine is a HP ZBook 15 G3. It has been connected to this dock for over a month without this issue. I'm not sure why the sudden issue as I don't recall any updates or new software prior to this happening. The dock is connected to 2x monitors via HDMI cables, and an ethernet cable. I connect a wireless mouse and keyboard to a USB3 port on the laptop. If the dock is connected to the laptop on startup, it reaches the login screen before BSOD. If I start without it connected, it will BSOD a few seconds after connecting the dock. It never gets to the point where the monitors display anything. It can boot with the dock connected in Safe Mode, as this seems to disable it from working. I have updated all drivers and the BIOS (including downloading the Softpaq Download Manager) but there has been no change. I've also updated the NVIDIA drivers to the latest version without change. What should I do next to solve the issue?

A:BSOD upon connection to HP Elite Thunderbolt 3 Dock

I would personally try isolating the culprit, then go from there: 1) remove 1 monitor from the dock, then test2) remove ethernet from the dock, then test3) remove the last monitor and hook it directly to the laptop, so the dock is attached with nothing to it, then test4) I have my dock set to "Always Connect" in the thunderbolt software, not sure if that helps any.

Read other 2 answers
RELEVANCY SCORE 91.2

Unfortunately I still haven't resolved the issue with my laptop. It's rather frustrating because we have an identical laptop and hardware setup with one of my colleagues and his works fine. No combination of BIOS update software uninstall and reinstall has resolved this issue. It's a shame because I have been accustomed to using the docking station for my older Compaq based laptop / Workstation and I really do love the feature.

Read other answers
RELEVANCY SCORE 91.2

I am trying to find a replacement Thunderbolt cable for my docking station, I have had no luck even finding the part number for the docking station let alone a part number for the cable. Please help if you can.Thanks

Read other answers
RELEVANCY SCORE 90.4

Hi all, We bought about 10 HP X2 Elite 1012 G1 along with Thunderbolt Docking station. I setup the laptop then installed the drivers for Intel Management Engine and Thunderbolt dock. Updated the firmware for Intel chipset as well. Since we setup these laptops user complain about the dock not getting detected by laptop. No matter how many times they restart. I went through each laptop and observed the following issues: 1- When I open the Thunderbolt software, it shows multiple HP docks in the attached devices with cross sign (which means the device is disconnected). It seesm that the Thunderbolt software creates multiple entries of the same dock then fails to detect it 2- When the laptop goes to sleep mode, the dock gets disconnected and then it doesn't get detected at all, even after reboot.  So far the only fix is as below: (which worked 90% of the time) 1- Uninstall both Intel management Engine driver and Thunderbolt Secure connect driver2- Install both Intel management Engine driver and firmware + Thunderbolt Secure connect driver BUT, this can't be a proper fix because in a corporate environment we can't go through this every single time. It's a total waste of time/money for a corporate. On top of that, users get frustrated by this issue that is ahpenning constantly. HP PLEASE FIND A PROPER FIX. PLEASE ALLOCATE YOUR IT PROFESSIONALS AND DEVELOPERS TO DIG THROUGH THIS ISSUE. We bought more than $2m ... Read more

Read other answers
RELEVANCY SCORE 89.2

Hello I just bought a new HP Spectre X360 with a elite thunderbolt 3 65w dock. After installing all the drivers everything is working when i connect the laptop to the dock. But the only thing that i cannot get to work is the power button on the dock. It doesnt light up in any colour like it says in the manuel and when i press it, it does nothing. I went to search for thunderbolt options in the bios but it seems there are none there. I updated to the latest bios (f.11) btw. Hope someone can help me with a solution kind regards Jelle

Read other answers
RELEVANCY SCORE 84

Is there a way to have users be able to connect a the Thunderbolt 3 dock without admin privlages? I found this post in a different lenovo forumhttps://forums.lenovo.com/t5/ThinkPad-T400-T500-and-newer-T/Pre-Approve-Thunderbolt-3-Devices/td-p/4... but I am not sure where to get the thunderbolt 3 secure connect installer to try and attemp this. 

Read other answers
RELEVANCY SCORE 64.8

To back up Dell-Brian B's threads you can find all the available Dell documents for the Dell Dock and Dell Thunderbolt Dock here. 
TB

Read other answers
RELEVANCY SCORE 64

Hi @ all, i have a Elte x2 1012 Tablet and the Thunderbolt 3 Dock 65 W (P5Q54AA) and i want to install over PXE a new customized Windows OS. The BIOS and the Dock have the latest BIOS Version (Elite X2 - v1.14).But i cannot boot over PXE. The PXE Option is not visible in the BIOS under the UEFI Boot Order/Legacy Boot Order.The Network (PXE) Boot is marked.12 sec. push the Power Button - the same behavior. What to do? please help.

Read other answers
RELEVANCY SCORE 63.2

I've an Elite Thunderbolt 3 Dock connected to my ZBook, everithing is working except for the Ethernet network adapter.In device manager it appears under Other devices as "Ethernet Controller"  with a problem icon. Location: PCI bus 66, device 0, function 0The drivers for this device are not installed. (Code 28)There is no driver selected for the device information set or element. I've searched on hp support for a driver but I couldn't find any, there is only the "ASMedia eXtensible Host Controller (xHCI) Driver". Any solution?Which driver I can use?

Read other answers
RELEVANCY SCORE 62.4

HP ZBook Dock with Thunderbolt 3 usb device issues. USB Keyboard randomly sends a stream of a repeated character.  I will be typing and mid worrrrrrrrrrrrrrrrrrrrrrrrrrrrrrr d will get results like in the word above.  The inverse happens alot too, were it just drops a few characters i have typed. USB Mouse lag is horrible. Both devices will stop functioning, need to reboot the dock to recover them. Any one have any suggestions or which drivers are the most stable?

A:thunderbolt dock

#HPExpertDayYou will have to update BIOS/Firmware if any. Install the docking station drivers. Try using a different keyboard, if the issue stops then issue was with keyboard.http://support.hp.com/us-en/document/bph07165

Read other 5 answers
RELEVANCY SCORE 62

Hello all,I bought a Yoga X1 2018 and during the shop they suggest the Lenovo Thunderbolt 3 Dock. Since I thought that having to disconnect only one cable when bringin the laptop from the desk to the meeting room would have been useful, I bought it.With my disappointment I setup everything and I did some tests on the laptop just to discover that the performance of the laptop when powered through the docking station are 1/3 with respect to when it's powered by the 65W power supply and 1/2 of when the laptop is on battery... (234pt vs 640pt vs 563pt | dock/65W/battery)Now since the docking station has a 135W power supply, I really can't think that this is an issue with the supply from the docking. Also since the laptop is even faster on battery I really don't understand how it could be related to the power supply... anyway I've connected both the 65W power supply and the docking and the performance are back to normal.Is there anyone who can suggest me what's going on or how to report this to Lenovo?

A:Thunderbolt 3 dock & Yoga X1 3rd gen

Hello,i have the same setup (X1 Yoga 3rd Gen + Thunderbolt Dock)  and dont experience less or different performance.I have 2 monitors with display port and couple of USB devices connected to the Dock. Also using 2 external and the Yoga monitor at the same time was never a problem.What tests have you done to measure the performance?best regards,AT

Read other 2 answers
RELEVANCY SCORE 62

So I have a Precision 5510 laptop with Xeon processor, no 4K screen.  My question is about this thunderbolt dock TB16.  I have one HDMI out and was asked if I can make that work on 3 external monitors.  None are 4K.  Is that possible?  Can it function as extended desktop, not duplicated? And if so, is that 3 external plus laptop? Or is the laptop screen on of the 3? 

A:Thunderbolt Dock & 3 Monitors

Depends on resolution - see this article for more information:
www.dell.com/.../SLN301105

Read other 1 answers
RELEVANCY SCORE 62

I want to buy the Lenovo Yoga 920 (i7 with 16 GB) and I?m used to work with 3 external full HD Monitors. Since it has 2 Thunderbolt ports, it looks like the Thunderbolt 3 Dock may work with the 920. However, it is not listed on the compability list for the dock. Therefore: are the dock and the 920 working together?  

Read other answers
RELEVANCY SCORE 62

I have a new P51, 64 GB ram, SSD hard drive. Ihave a docking station at work and one at home. The one at home has a 6 TB Seagate BarraCuda pro USB3 drive attached. When I dock the laptop at home, the system will not boot. It gets to the bios boot sceen and stays there until I turn off or disconnect the USB drive. Once I do that, it continues to boot and if I turn the USB drive back on, it works fine. If the drive is my old 1 TB barracuda, it boots normally.  

Read other answers
RELEVANCY SCORE 62

We recently started using Bitlocker with a PIN at startup. On all our laptops using the "old"-type dock, that you click your laptop into everything is working fine, the users put the laptops into the dock, turn it on, type in the Bitlocker PIN using the external monitor and keyboard, and then processed into Windows. Our problem is with everyone using the new Lenovo ThinkPad Thunderbolt 3 Dock. When the users connect the laptops to the dock using the cable and then power on from the dock, the laptop will power on (the LED in the ThinkPad logo lights up) but the monitors and keyboard connected to the dock is not working, and then after some time the laptop will power off again. We currently use a workaround where the users power on, type in the Bitlocker PIN and login to Windows before connecting the laptop to the dock, but this not a proper solution. We have Enabled both "Thunderbolt(TM) device" and "USB device" under "Support in Pre Boot Environment" in the "Thunderbolt 3"-menu in BIOS, but it still doesn't work. Have anyone else experienced this problem? Or does anyone know of a proper solution.

Read other answers
RELEVANCY SCORE 62

https://support.lenovo.com/us/en/solutions/acc100356 Hello I have the new X1 carbon laptop (5th gen).  I also have two 24 in thinkview external monitors with hdmi/display port inputs. If I buy the above adapter will I be able to run the two external monitors in extended mode so I have can have three different screens  total (laptop screen, monitor_1, monitor_2)?  

Read other answers
RELEVANCY SCORE 62

I have a new ZBook G3 17" with ThunderBolt 3 dock station.I have install my laptop with boot up finger&password protection.I have connect display, keyboard and mouse to this dock.Every time  I bootup, I have to open laptop to insert access data.This look like a stupid solution compare the old HP docking station that I have on my HP 8760W where dockingstation are working from first second and I can insert my access data (password) without opening lid.There are any solution to this problem ?I have also another problem. On the old PC was possible create a protected area of HD using a little part of it withHP ProtectTools. This SW is not possible to install on ZBook G3.I don't found any solution to create it. Only using Windows 10 (that I don't want to use) functionality.More we go on and worst SW/HW are delivery to user. AC

Read other answers
RELEVANCY SCORE 62

I have a Yoga 370 (Win10) and a Thunderbolt 3 dock & Thinkpad USB-C dock and i cannot get them to play nice. I am using the USB-C cord on both devices, it transmits video and power but not USB or Ethernet. I have downloaded drivers and firmware from Lenovo and still no luck, the computer does not see the dock BUT the video and power are there. I changed my BIOS settings per the firm ware update well and no luck. any help would be much appreciated!

Read other answers
RELEVANCY SCORE 62

Hi,I have a Thinkpad P50 and today my Dell Thunderbolt Dock arrived.Unfortunately, it doesn't work  (= it is not recognized in any way), although Dell specifically says that the dock also works with non-Dell Thunderbolt 3 machines. I have installed the Thunderbolt software from the P50's driver site and updated to BIOS 1.17.Lenovo released an "Intel Alpine Ridge Thunderbolt Firmware" for the P70. But there's no such firmware update on the P50's site, just the Intel Thunderbolt Software from November.The 1.17 UEFI/BIOS Update says it fixed a Thunderbolt issue, but apparently not mine Has anyone ever gotten some Thunderbolt 3 device working on the P50? I just hope this will be fixed soon, because the Thunderbolt dock seems to be the only convenient way to drive three 4K displays with the P50 (2 via Thunderbolt 3, 1 via miniDP).  

A:P50: Thunderbolt 3 dock not recognized

What's the model number of the dock?  Thanks!

Read other 9 answers
RELEVANCY SCORE 62

I just picked up the TB3 dock and all seems to be working, however it is not charging my laptop using the included Thunderbolt/Power combo cable. The power light shows on the dock, and connected devices work on laptop, but no power. Any ideas?

Read other answers
RELEVANCY SCORE 62

For some reason, i can't turn on my new P51 using the power button on the Thunderbolt 3 dock.   I'm sure i've got something hooked up wrong, but thought i'd check here.   Is there a setting in Control Panel (power button) that i need to change?  In order to use my laptop / view from my external monitor, i have to open the lid to the laptop, power on and then i can use the external monitor.  thanks for any help. 

Read other answers
RELEVANCY SCORE 62

I connected my P1 to my existing Thunderbolt 3 dock and to my pleasant surprise, the system was in charging mode when the system was off. I thought that the unit could only charge through the slim power connector port, but it seems that it will also charge through the Thunderbolt 3 port when the system is not running.

Read other answers
RELEVANCY SCORE 62

Hi,
I've seen that the Thunderbolt TB15 Dock is not valaible anymore in Italy due to hw problems. Do you know if a new one is arriving?
Thanks

Read other answers
RELEVANCY SCORE 62

Hi allWell we all now about the fan issue which is much better since the last BIOS update.Nevertheless I have sometimes fluctuation fan noise, although there is no load. This is mainly when the notebook is at the thunderbolt docking station.I found out, that as soon as I connect my notebook to the docking station more or less all app-processes suddenly move over and start running on the GPU. The CPU has virtually no load.Why do all processes start to run on GPU when the notebook is connected to the dock? Is this an issue or is there a good reason for this behaviour?My Notebook and Windos has the latest drivers/bios and updates installed.Regards,Sebastian

Read other answers
RELEVANCY SCORE 62

Is the new ThinkPad Thunderbolt 3 Dock compatible with P50? Dock details page (https://pcsupport.lenovo.com/cz/en/solutions/acc100356) only list P51s, but not P50. But P50 claims support for Thunderbold 3. If yes,  can I connect Ethernet LAN over the dock? And what driver I need to install?    

Read other answers
RELEVANCY SCORE 62

As the only docking solution available and moving from a more traditional dock, its less than suitable.  HP needs to make a longer cable and the end that connects to the laptop should be at a right angle.  The cable is so stiff and thick it takes nearly 4" to make the turn.  HP makes it impossible to find this out how long the cable is with out purchasing and at that point your stuck with it.  Hardly a customer satisfaction issue they should want to propigate!

Read other answers
RELEVANCY SCORE 62

Love the concept of the thunderbolt 3 dock, can't fathom how it was designed though.  On my zBook 15 G3, the power and thunderbolt ports are on the right side of the laptop.  The dock has the cable port on the left rear side, completely crossing over all the ports when you put the dock on a desk with the back facing away from  you.  Then they ship a cable that is barely long enough to put the dock directly behind the laptop and connect it.   Where do I buy a longer cable HP, please!

Read other answers
RELEVANCY SCORE 61.2

 Hello all, I am a solutions architect trying to solve an issue which I have never heard of before. Though others users are having this same issue, my experience has been different then what they have seen. First,The following are the Security options for Thunderbolt devices as per user guide

No Security: Allow Thunderbolt devices to be connected automatically.
User Authorization: Allow Thunderbolt devices to be connected after user authorization.
Secure Connect: Allow Thunderbolt devices to be connected with a saved key that has been approved by the user.
Display Port and USB: Allow only DisplayPort-compatible devices and USB devices to be connected. Thunderbolt devices are not allowed to be connectedI don't think this is entirely true or at least does not apply properly each time. My scenario:T480, T580, or Yoga x1 3rd genImaging with a standalone MDT environmentDevices come pre-configured from Lenovo with Thunderbolt 3 Security Options set to "User Authentication" Installing all the drivers in the latest SCCM driver packs that Lenovo offers - though the x1 3rd gen driver pack was missing on the site this morning. On some devices, this security option seems to do absolutely nothing. MDT uses the local "Administrator" account to perform post-OS items. I'd say about 75% of the devices reach their destination and the user logs in for the first time as a user, not an admin, and the dock functions properly; monitors/mice/keyboard/etc. work. 25% of ... Read more

Read other answers
RELEVANCY SCORE 61.2

Issue 1I purchased the ZBook Studio G3 + 2 months wait on the Thunderbolt 3 Dock to primarily connect 2 4K Samsung monitors.  When connected via the display port one will display at 4k while the other will only display @ 2560X1440.  I had bought a a couple of CableMatters thunderbolt 3 X display port adapters while waiting on the dock.  If I plug one of the monitors in using the adapter and the other into the display port both will display 4K.Anybody else having this issue? Issue 2After the computer goes to sleep only one monitor will wake up.  The NVDIA control panel still shows both connected.  Only way to get the second monitor awake is to shutdown and reboot. Issue 3I have the displays configured to go blank after 1 hour.  Once this occurs and I enter my password all of my open programs are displayed on one screen rather than on both.  This would be normal if you have undocked and re-docked a laptop. Issue 4If the laptop is opened while docked. One display goes blank and one is duplicated with the laptop screen.  This is not typical docked behavior.  I moved from an  Elitebook 8540W with dock.  I'm really questioning my whether this was an upgrade.

Read other answers
RELEVANCY SCORE 61.2

I can't update my dock since it gives an error every time I try to update. I tried manual updates but BIOS files never show up, I think the problem lies with my service code not being in the system.
I tried entering the service tag and express service tag but it says it's not a valid product. If I provide the service tag and express service tag on this forum, would it be entered in the system so to speak? I also get critical updates and when I click update, an error occurs so my dock is not in sync with my XPS in terms of drivers. When I try to do manual updates, I'm only given 3 files and can't find bios files anywhere.

A:Service tag not in system for ThunderBolt Dock 16

My service tag is not in the system either but I can update my software.  The Firmware and drivers are not for the Dock but for your computer and can be downloaded from the TB16 support site.

Read other 3 answers
RELEVANCY SCORE 61.2

I've set up my Thunderbolt 3 dock. I notice in the status, it shows "94% available (plugged in, not charging)". It has been like this for the past two days. Does the battery have to reach a certain threshold, before charging? Or is this normal? My last dock, with the 8570W would always charge to 100%.

Read other answers
RELEVANCY SCORE 61.2

Since the last Thunderbolt firmware update the DP ports no longer work. No matter what settings you try, no signal is detected. The only way to use monitors now seems to be to use the front USB-C port and connect it to the first monitor and then use DP daisy chain from monitor 1 to monitor 2. We have 2 Thunderbolt docks with the Update installed and both have the issue. We have one with the stock firmware and it works flawless.  Anyone else having the same issue? Any idea how to fix?

Read other answers
RELEVANCY SCORE 61.2

Hey There We have bought 15 Studio G3s and docks to go with them We have ran into issues with about 40% of the docks. Not sure if its the docks or laptops causing the issues. One laptop tries 3 diffrent docks, USB and Ethernet wont work. Another laptop will randomly BSOD, if the dock is even touched it will BSOD as well. I've gone though all the posts about these issues from last summer but nothing really seems to help. Is there a newer fix that I am missing somewhere? Thanks Josh 

Read other answers
RELEVANCY SCORE 61.2

I have a thunderbolt 3 dock that is useless charging this yoga 370 up. Plugged into the dock it either loses charge or takes upto 6 hrs to reach full charge. Plugged directly into the yoga; charge time = 1hr. Any ideas how to fix this? Thanks













Solved!

Go to Solution.

A:Thunderbolt 3 dock doesn't charge

Firmware update appears to have fixed it, or pot luck. 

Read other 1 answers
RELEVANCY SCORE 61.2

I recently purchased the X1 CRBON 5TH Gen (2017)...type 20HR plus a thunderbolt dock.I connected them together with a Dell 28" 4K (@30Hz) screen (p2815q) connected through DisplayPort from the dock, plus a Microsoft keyboard and Jabra 510 USB speakerphone.Using the Windows 10 stock image from Lenovo, plus Office 2016, Chrome, Visual Studio, Skype,  and various other apps (putty, RDP, SAP GUI, others) the video performance was atrociously bad. Alt-Tab, which I use heavily would take 3-4 seconds to respond, switching between applications, Windows would freeze and sometimes crash, I would often get blank or black windows in Chrome and Office. This was on the embedded Thinkpad screen as well as the external monitor.I ensured Windows Update was up to date, as well as Bios, Drivers etc through the Lenovo companion app. So...I dove into the BIOS and voila! There is a switch that lets me change the Video memory from 256 to 512 MB allocated!I went to change it, and it would not change until I changed the setting:BIOS > Config > Thunderbolt 3 > Security Level = from "User Authority" to "DisplayPort and USB"I switched that setting, and then set my video memory to 512 MB, rebooted and voila! Problem solved. I worked that way for a little while, took it into my office and plugged it back into my Thunderbolt 3 dock and while my video and LAN connections worked...my wireless keyboard (USB dongle), and Jabra 510 did not. Curious. I r... Read more

Read other answers
RELEVANCY SCORE 61.2

Hi, all. I have a problem thunderbolt is not charge notebook, but usb ports and displayport working.1. I connect the Laptop with the Thunderbolt connector on the backside of the Dock (beside the HDMI/DP connectors) and on the frontside, not working.2. I updated all drivers.3. I go into the BIOS and "disable the battery for technical service".But if I use an AC power adapter, it charges.Does anyone have a solution?

Read other answers
RELEVANCY SCORE 61.2

Just got purchased the x1 carbon 5th gen along with the Thunderbolt 3 dock.  However, the dock will not charge the laptop.  Every time I get the error message "The dock is not supplying enough power to your computer.  Please use the ac power adapter that came with the dock".  I am, in fact, using the ac adapter that came with the docking station.  I have updated the bios as well as all of the other recommended updates and still get the same error message.  Does anyone have a solution?

Read other answers
RELEVANCY SCORE 61.2

I have a thinkpad x1 yoga 1st signature edition. I don't have a usb-c port in my laptop. How can I connect the thunderbolt3 cable to my laptop?
I tried a usb to usb-c cable, and also an hdmi to usb-c adabtor, and my laptop can't recognize the dock either of those ways...
 
Moderator edit: Matched Subject to content.

A:Thunderbolt 3 Graphics Dock with x1 yoga 1st

I believe you need a thunderbolt 3 enabled device for it to work at all. 

Read other 2 answers
RELEVANCY SCORE 61.2

The thunderbolt dock was working.  I was gone for a week.  Came back and plugged laptop into dock.  No longer works.   The dock will charge the laptop, but none of the devices are recognized. Drivers are up to date.

Read other answers
RELEVANCY SCORE 61.2

With the issues of USB port enumeration apparently resolved, I've started rolling out zBook 15 G3s to our users.  I've discovered in doing so that the dock does not appear to support Wake-on-LAN.  Is there an option to enable this functionality or perhaps is this functionality on the roadmap to be added in a future firmare release? Thanks, Stan

Read other answers
RELEVANCY SCORE 61.2

I keep getting BSOD 'DRIVER_VERIFIER_DMA_VIOLATION' when my thunderbolt dock is connected. I have an X1 Extreme model 20MF-000DUS.  I have already installed the following: Thunderbolt Firmware Update Utility for Windows 10 (64-bit) - ThinkPad X1 ExtremeBuild_20180516-N2ETG09W01 Oct 2018Intel Thunderbolt software for Windows 10 (64-bit) - ThinkPad P1, X1 Extreme17.4.77.40015 Aug 2018I started with a Lenovo Thunderbolt 3 dock, but after all the issues despite updating it's Firmware and drivers with the most current:ThinkPad Thunderbolt 3 Driver for Windows 10, 7 (32-bit, 64-bit)V1001317 Sep 2018ThinkPad Thunderbolt 3 Firmware3.12.00320 Dec 2017And I was still having issues with things not being recognized as well as that BSOD so after reading how many people had issues with it despite upgrading firmware and drivers I decided to return it as it would not work properly and go with another dock which recevied stellar reviews as opposed to Lenovo TB3 dock which did not. Now I am using CalDigit TB3 dock and still getting the disconnection and BSOD so I am assuming its thunderbolt drivers, software, or a hardware issue? Anyone else having this problem? Any suggestions? Thank you!

Read other answers