Over 1 million tech questions and answers.

HP Envy 15-k253ca Laptop HP Control Zone Scrolling option no...

Q: HP Envy 15-k253ca Laptop HP Control Zone Scrolling option no...

DavidPK- I am having an issue that' I've had since I got the laptop in fall of last year. and this is my 2nd post about it. The problem is, I like to use the scroll area on the control zone but cannot. There is no option for the "scrolling" settings when I go into Control Panel and the HP Control Zone. I could not find a solution originally so I decided to give Windows 10 a try. .and this did seem to fix the issue. Now I've recently went back to Windows 8.1 and of course this problem came back. I would like to know what I can do to fix the issue. Here's the things I've tried :* Fresh Restore of the Original OS that came with the Laptop* Uninstalled the Synaptics driver and HP Control Zone software and Reinstalled the latest version for Windows 8.1 64 bit - Like 3-4 times ThanksBen











Solved!
View Solution.

RELEVANCY SCORE 200
Preferred Solution: HP Envy 15-k253ca Laptop HP Control Zone Scrolling option no...

I recommend downloading and running DAP. It can help sort out any driver and firmware related issues on your system

It's worked out well for many of us in the past.

You can download it direct from this link http://downloaddap.org. (This link will open the download page of DAP so you can save a copy to your computer.)

A: HP Envy 15-k253ca Laptop HP Control Zone Scrolling option no...

Hi Ben, You may be able to get around this as follows. First, download the Synaptics driver on the link below and save it to your Downloads folder. Synaptics Driver Version 17.0.18.8 When done, open windows control panel, open Programs and Features, right click the current Synaptics driver and select Uninstall. When complete, restart the notebook. When windows has reloaded, open your Downloads folder and run the Synaptics installer - when this has completed, restart the notebook again. Let windows fully load for a few minutes before checking. Note: In the synaptics control panel, it the 'Edge Swipes' option is expressed, you'll probably need to de-select it. Regards, DP-K

Read other 7 answers
RELEVANCY SCORE 88

How do i disable the HP control zone (touch pad ) on my laptop. I keep touhing it when i type and i dont like it at ALL. i want it disabled. Please provide steps to disable.

A:how to disable control zone (touch pad) on my HP Envy laptop

Hi,Please go through this, it would help you: http://support.hp.com/in-en/document/c04648748#AbT7RegardsVisruth

Read other 1 answers
RELEVANCY SCORE 77.6

Downgraded from factory default Windows 8.1 to Windows 7. In BIOS, enabled Legacy Support, disabled Secure Boot option, then selected Internal CD/DVD Rom Drive as boot option. Anyone knows the make and part number of the wireless LAN controller? As I have tried "Realtek RTL8723BE/RTL8188EE 80211b/g/n Wireless LAN Driver" from HP, did not work.     

Read other answers
RELEVANCY SCORE 76.4

I have the envy m6-no15dx and have been suffering the same problems - solution that seemed to work for was to go into HP Control Zone Settings and Smart Sense - and click restrict to zone.  If you restrict pointing to the right 2/3rds of the touchpad it seems to get better.  I noticed that it was only the left third of the touchpad that was giving me problems.   That said, disabling the touchpad and using an external mouse seems to give worry free operation. --Mike

Read other answers
RELEVANCY SCORE 75.6

Hi, I'm having a strange issue with my control zone. One day I am able to click on the pad , but the next day I am not. I don't know why I'm no longer able to click it, and I do not like tapping it to right click for things. Is there a way I can return the clicking feature?

A:Problem with Control Zone HP Envy

Hi, Can you post back with the full Model No. and Product No. of your notebook - you can usually get this by holding down the fn key and pressing esc, otherwise see Here for a guide on locating this information. Regards, DP-K

Read other 3 answers
RELEVANCY SCORE 73.2

I bought this laptop 4 hours ago. Within 20 minutes of me setting it up, I began have alot of issues with the touchpad. I tried installing the newest drivers, troubleshooting, and all of the other stuff that has been reccomended to other people and Im still having this issues. I did abit of research, and it seems that almost everyone with a control zone touchpad is having alot of issues. Is there any way to fix it? And when will HP acknowledge the fact that this touchpad needs to be fixed, and do something about it?

A:Control Zone touchpad not working properly Hp Envy m6 n010dx

Dear Customer,Welcome and Thank you for posting your query on HP Support ForumIt looks like you are facing difficulties with the Touchpad of your NotebookWe will surely assist you with thisSteps to drain the Static charge and loading default BIOS settings to resolve the issueStep 01. Turn OFF the NotebookStep 02. Un-plug the Power/AC Adapter and also remove the Battery tooStep 03. Press and Hold the Power Button of the Notebook for a full minuteStep 04. Now let's re-insert the battery back in and plug back the Power/AC AdapterStep 05. Start the Notebook and keep tapping F10 Key during the startup to access the BIOSStep 06. Once you get to the BIOS, Please press F5 Key to load setup defaults for the BIOSStep 07. Now let's press Esc/Escape Key. Save Changes and Exit - YesStep 08. Now please wait till the Unit loads the Windows Operating systemNow please re-install the touchpad drivers from HP Website in order to resolve the issueNote: After performing all the above shown steps if you still have the same issue that could be a hardware issue and I strongly recommend you to get the Notebook replaced as its brand new. You have a 30 days time from the bill/invoice date to get your unit replaced either from HP directly or from the point of purchase where you bought it from.Hope this helps, for any further queries reply to the post and feel free to join us again**Click the KUDOS star on left to say Thanks**Make it easier for other people to find solutions by marking a Reply 'Accept as... Read more

Read other 5 answers
RELEVANCY SCORE 63.2

Does the new Envy models offer a 32GB memory option with touch screen?

Read other answers
RELEVANCY SCORE 54.8

I have gone through all the steps to clean and protect my computer (Windows XP Dell) and thought I was really clever. Took me best part of a day. However, my partner can't now connect to the internet from his laptop, (also running Windows XP), and I am about to fall asleep trying to suss out how to find the IP address of the laptop to add to the trusted zone of Zone Alarms: which keeps flashing up messages that various addresses are trying to access my ports!! Help, before I lose all credibility. My computer is now trussed up like a turkey, and I am about to become single again. My computer is about to become disposable.Computer dunce (PS - read the tutorials about TCP and UDP. I thought TCP was good for cuts and bruises? )Moderator Edit: Moved topic to more appropriate forum. ~ Animal

A:Unable To Add Laptop To Trusted Zone In Zone Alarm

I'm in the same situation, and have learned a few things. Go to Start > Run >cmd. In the black box, type ipconfig. This will give you the ip address of the computer you're on, as well as the gateway ip address of the wireless router. I also have zonealarm firewall, so I added the ip address to the trusted zone. You may also want to check your wireless router's info because depending on the security you've set, it may ask you for a code (WEP or WPA). Let's start here and see what happens. Sounds like this will be one for many inputs...

Read other 2 answers
RELEVANCY SCORE 54.4

i have installed windows 7 home basic 64 bit.now the scroll option which will be done by two fingures is not work.i installed mouse drive from hp ofsficial website.still doesnt work.plz helphp probook 450 G2

Read other answers
RELEVANCY SCORE 54

Hello,

I recently bought a Lenovo Y700 running W10. I am trying to get it set up the way I like and cannot find an option to use one-finger scrolling with my touchpad (two-finger scrolling is an option and works just fine).

I am updated to driver 19.0.19.1, but for some reason when I go to Mouse Properties it lists the driver version as 19.0.17.26. I'm not sure if this is related. Here are some screen caps of the driver discrepancy as well as the UI for the mouse, which has no option for one-finger scrolling. How do I enable this?

Thanks for any advice you can give me!

Read other answers
RELEVANCY SCORE 53.6

Hello everyone,

My subscription to Zone Alarm Pro is about to expire, I'm unsure as to whether to renew it for anohter year. Would you recommend this or is there a better firewall out there, either free or subscription?

Thanks,

Martin
 

A:Best firewall option (Do I renew Zone Alarm Pro)?

Hi Martin,

Only Jetico scored higher than ZA Pro in the March 2006 test results from:
http://www.firewallleaktester.com

Click on the Tests link in the left-hand panel which takes you to an explanation of the scoreboard details, and at the bottom click on the View Results button to go to the scoreboard comparison of the different firewalls.

Jetico, by and large, is an advanced firewall with a steep learning curve. There is a solid group of users and some threads on Jetico at the Wilders Security Forums, in particular, the Other Firewalls subforum at: http://www.wilderssecurity.com
Jetico's new firewall, I believe it is version 2.0 is no longer free. You can get Jetico at: http://www.jetico.com

If you are not willing to learn, my advice would be to stay with ZA Pro.

-- Tom
 

Read other 1 answers
RELEVANCY SCORE 52.8

Hi, I just received my new HP Envy 14 today and I'm having some issues with it. In the instructions, it says that two finger scrolling and zoom is a feature on this laptop, but it isn't working a bit for me. Also, very often when i try to left click, nothing comes up. This happens a lot on the desktop when trying to right click multiple files selected. This is my first windows 7 pc. Is this some hidden feature that I'm unaware of? Thanks.

Read other answers
RELEVANCY SCORE 52.8

Hey all,

I have done several Win 8, Win 8.1 Preview, and Win 8 RTM clean installs recently and I always seem to end up with a Pacific Time Zone by default. Now, that tells me I am either missing that option on a consistent basis or MS didn't include it. Just curious to see if anyone else can confirm this as an issue or possibly confirm that I did, in fact, miss it.

Thanks,

my2cents

A:Option to Select Specific Time Zone During Installation?

I found these:





if you use a Microsoft Account to logon, and allow it to use your location, it will set it correctly automatically. Of course, Windows Server products have not been giving this option during setup since Server 2008 R2.





Eight things to do right away after you set up Windows 8 | Page 2 | ZDNet

Read other 4 answers
RELEVANCY SCORE 52.8

I have searched, but not found the answer.
I have my mouse/scroll set at 4 lines. If I want to scroll down a page-several lines- or even the whole page, after I tap the mouse/pad a few times the scrolling goes out of control!! It zooms either down/up, depending on which way I was going, so I pass up the line I want several times. It is very frustrating! How do I control this? I tried control panel/mouse/wheel, but after setting it to 4 lines it still goes wild! Help, please. TY

A:out of control scrolling...

What kind of mouse do you have?

But just to start go to

tools (top of ie page)

internet options

advanced

smooth scripting should be checked

x

Read other 6 answers
RELEVANCY SCORE 52

I need to know whether Microsoft Mouse & Keyboard Center - Windows 10 differs in any way to the 8.1 version. Specifically with regard to the settings for an Optical Mouse ... does it have a setting whereby I can turn off Vertical Wheel Scrolling ? [see image]

Thanks in advance.

A:Microsoft Mouse & Keyboard Center - ? vertical wheel scrolling option.

I don't know about your particular mouse, however Microsoft Mouse and Keyboard Centre shows that option for my Microsoft Comfort 6000 mouse. The version installed is 2.3.188.0 (64-bit), which I think is what automatically came through Windows Update when I clean installed Windows 10.

I also just installed 2.8.106.0 (64-bit) from their website and that's the same as the screenshot too.

Read other 1 answers
RELEVANCY SCORE 52

when i go into my control panel and i select any random spot on the screen and start dragging down, once i get to the bottom of the page, it keeps scrolling and the icons from control panel keep refreshing as my highlighted area keeps getting bigger

what do i do?
 

A:control panel scrolling

I don't really understand what you are describing. Are you not able to double click an icon to open it? Why are you dragging the mouse over them?

And, whatever this behavior is, is it affected by the View tab selection (list, icons,details, etc...)?
 

Read other 1 answers
RELEVANCY SCORE 52

Hi .First of all this is the first time I'm using this site to post this question. I'm having serious problem with my laptop.
Here is the spec:

OS Version: Microsoft® Windows Vista™ Home Premium , Service Pack 2, 32 bit
Processor: Intel(R) Core(TM)2 Duo CPU T5800 @ 2.00GHz, x64 Family 6 Model 15 Stepping 13
Processor Count: 2
RAM: 3034 Mb
Graphics Card: Mobile Intel(R) 4 Series Express Chipset Family, 1293 Mb
Hard Drives: C: Total - 295289 MB, Free - 241056 MB; D: Total - 9951 MB, Free - 1797 MB;
Motherboard: Compal, 3607, 99.82, CND8470174
Antivirus: Microsoft Security Essentials, Updated and Enabled

The problem is that sometimes the whole page gone nuts. Whether I open web browser or usual file the whole page scroll down without I scrolling it. I've disconnect the mouse to determine the mouse is the problem but the page still scrolling down. Worst of all I cannot scroll it up.Whether i'm using arrow button on the keyboard it still scrolling down. Even I cannot click icon on my desktop because the scrolling option mess around. If I click any icon it will select the most bottom of the desktop. Then I reboot. While I reboot suddenly heard loud beeping sound about 20 beeping.I think it bios beeping.I dont know whether it software or hardware fault I really need help because I dont know what cause this problem????
 

A:pages scrolling down without any control

Can someone help me???
 

Read other 1 answers
RELEVANCY SCORE 50.8

when i open zone alarm and the hp printer toolnbox the display goes off the page as demonstrated in the attachments. I can open the zone alrm box to full screen but i cannot open the hp toolbox to full screen how can I fix this.
 

A:zone alarm control display messed up

Read other 16 answers
RELEVANCY SCORE 50.8

Hi. I recently bough an HP Envy m6-n012dx laptop. Not long after using it the Control Zone Trackpad began to be incredibly glitchy. Everytime i would move the mouse, it would jump randomly across the screen. The left side of the track pad that is supposed to allow you to switch between your open apps sometimes stops working then starts to work again then would stop working for no reason. Same with the right side that shows the start button, search button, settings button etc. To make things worse; sometimes the mouse would begin to move slowly across the screen without me even touching the track pad. I try downloading the most recent synaptics driver and afterwards the trackpad worked for a little while, then went haywire again. Not only is the trackpad messed up but sometimes my touch screen doesnt work. For instance, my touch screen currently isnt working as im typing this. What do i have to do to solve the problem, because i really like this laptop when everything is working fine 











Solved!
View Solution.

A:hp control zone trackpad incredibly glitchy

SUCCESS! After weeks of calling calling call centers in east Asia, and going as far as having a technician having me wipe my entire computer and reinstall the OS, HP is finally sending me a box and not charging me for expedited shipping and repair.After I get my machine back I'll let everyone know how it turned out, but if you still have a warranty keep calling tech support and evenly incest for them to take it in for repair. They keep trying to treat this as a software issue and it is not, it is a hardware issue.

Read other 10 answers
RELEVANCY SCORE 50.8

I just downloaded Crawler parental control, which I heard has a conflict with zone alarm firewall. Well, since I do not have zone alarm firewall, I figured it would be ok. Nope... apparently, I have some component of zonealarm on my computer that the parental control is detecting, and it is not allowing the parental control to fully install onto my system. I have looked in add/remove programs, done searches on the C drive for zone alarm, and looked in the hijackthis log, and I see nothing that says zone alarm. How on earth can I remove whatever trace of zone alarm there is on my computer so I can get Crawler Parental Control to work?Thanks!Edit: Moved topic from XP to the more appropriate forum. ~ Animal

A:Zone Alarm And Crawler Parental Control?

are you able to give us a screan shot of your fully populated control panel's add/remove programs

and your c drive if possible

have you ever HAD zone alarms ON the computer?

Read other 4 answers
RELEVANCY SCORE 48.8

I would like to replace my 4 cell Li-Ion battery with more cell (6 cell or 8 cell) battery, if possible.Can anyone tell me the detail of the battery, for example 65Wh or anything that can be helpful. Also, can you tell me where I can buy original battery of longer duration for my Hp envy 6 1002tx in the USA, please. If it is possible to order online. Thank You. 

Read other answers
RELEVANCY SCORE 48.4

I do not use the rotation feature on my HP Envy often, but went to rotate it today and their is no longer an auto rotation button in the notification tool bar.  I checked the settings toadd the button back, it was not an option, under display settings there is no option to auto-rotate.  Apparently an update took the feature off the computer. Any help on fixing this issue would be very welcome.

Read other answers
RELEVANCY SCORE 48.4

My laptop recently lost the option to connect to the Internet.  When hovering over the Internet connection icon on the right hand side of the tool bar it reads "not connected - no connections are available." When I click on the icon and go to view connection settings it only gives me an Ethernet option or adding a Von number. No wireless options except for Broadband Connection which reads when clicked on "This connection is not available because there is a problem with your modem or network adapter." Any help is appreciated.

Read other answers
RELEVANCY SCORE 48.4

HP NOR MICROSOFT HAS BEEN ABLE TO GET THESE TWO BRAND NEW UNITS TO SPEAK OR RECOGNIZE EACH OTHER. H E L P? I' USING A COX HOTSPOT WITH NO PASSWORD REQUIRED. BOTH SAY CONNECTED TO WIRELESS BUT WON'T PRINT FROM MY NOTEBOOK.

Read other answers
RELEVANCY SCORE 48

Dear Team,
Can you please suggest me how to block control + U button on IE

Thanks in Advance
Bhaskar G R

Read other answers
RELEVANCY SCORE 48

I got a refurbished HP X360 Envy 15 u-493cl a week ago. It is working perfectly fine and all the drivers and bios is up to date in windows 10. However, the auto-rotation lock option in the panel and the display options is greyed and cannot be unlocked. Also the screen doesnt rotatte in tablet mode. And the option is never enabled, it remains greyed out and locked in whatver mode the laptop is.I am really upset over this and want to know what is the solution to it.

Read other answers
RELEVANCY SCORE 47.6

How can a remove or add options to the control panel? in Xp Sp3. Freeware maybe? thanks
 

A:Control Panel Option Removal

what options? You can use group policy to hide/show the control panel and/or allow/stop users fiddling with it.
 

Read other 2 answers
RELEVANCY SCORE 47.6

Hello,guys.I have a LAN (cable) internet connection.Two days ago my computer slowed down,but the only obvious error seemed to be the disability to control enable/disable property of the internet connection.Apparently,though the connection was enabled and I could access internet,it's icon showed disabled.The only time when the connection icon showed proper status was immediately after starting up the PC.Since I have Kaspersky Internet security,I ran the complete system scan.Kaspersky detected two trojans and removed them.The successive scan showed no infections.I ran Ewido anti-malware with the same result.Still,I can't control the internet connection enable/disable option.I'm wandering wether it has something to do with the previously detected trojans.I would appreciate some help with this.Thanks in advance.
 

A:Not able to control Enable/Disable LAN option

Read other 13 answers
RELEVANCY SCORE 47.6

Quick question, i am using a ATI radeon 700064mb pci and i was wondering what is the difference between, Display:

Plug and play = (name of card)

and

Default plug and play = (name of card)

What happens when i put it on default, more graphics, sound better, faster load times , what?

thanks.
 

A:Question about an option in my control panel

Hi U2K,
My guess is probably nothing. If the default means regarding a monitor that doesn't return a plug and play code to the os, it only allows the most common refresh rates at common resolutions.
If the card identifies the monitor properly, it should disable any resolutions or refresh rates that that specific mon can't or shouldn't run.

Just my .02
 

Read other 1 answers
RELEVANCY SCORE 47.6

I have XP Pro SP3 installed. I am trying to set recording options so my video screen capture program can also record volume. (no problem in recording video). When I click on the speaker icon in the systray it opens up four volume control options. But when I click on properties both recording and other are grayed out. I have updated all my drivers but still no luck in getting to the recording options.

Any ideas to get the recording options accessable would be greatly appreciated.
 

Read other answers
RELEVANCY SCORE 47.6

1. When trying to open existing or new graphic email attachments, the following error message appears: "This file does not have a program associated with it to perform this action. Create an association in the Folders Option control panel." Where do I find this?
2. Have not been able to download Adobe Flash Player. Each time I click "Download" nothing happens. Could the Norton security program be part of this problem?
 

A:Folders Option control panel

Right click on the attachment that won't open and 'save as', save to your desktop. Right click the file and go to 'open with' and choose which program you would like to open the files as a defualt. Make sure the 'Always use the selected appication for files of this type' checkbox is checked and open. Now when you open the attachment in outlook, it should load in the application you selected.
For Flash, go to www.adobe.com and search for standalone flash install. You should find the download page and be able to download a setup file to run locally which shouldn't be affected by norton or any other programs,
Hope this helps,
Stu.
 

Read other 2 answers
RELEVANCY SCORE 47.6

I have been trying to get bluetooth to work on my computer but keep failing.

When I went here ...

http://support.microsoft.com/kb/883258

.. I noticed there should be a bluetooth option in control panel requiring it to be activated. I dont have this and I am running XP with SP2.

How can I get this onto my computer?

Thanks
Dz

A:No Bluetooth Option in Control Panel

Hello Dezzmo, Welcome to TSF!

Have a look at this article... A User's Guide - How to navigate the Windows XP Control Panel.
(Click the coloured link.); then, scroll down to around Figure 20: and I think you will find the answer, under Portable Media Devices.

Post Back with the results.

Kind Regards,

Read other 9 answers
RELEVANCY SCORE 47.2

I have an issue that multiple people seem to have but I could not find a solution in any of the stories. I bought a HP Envy Phoenix 860-039NB which operates great except for 1 thing; The fan is going wild from the start of the PC and runs max. speeds the entire time. (Which makes a lot of noise) One solution is updating the BIOS but when I run the Assistant it comes up with the wrong BIOS update (Different Family). So this will not work. When I enter the HP Diagnostics right at the start of the PC and close it, the fan is running normal speed (So no noise). The PC is brand new but the sound it makes is horrible, can anyone help?? BIOS Version: KA2 VA0.12Board: 2B36  

A:HP Envy Phoenix Fan out of Control

Hello I have seen this before. Your SSID is 2B36 but there is a BIOS update from HP here for SSID 2B4B. Version A0.38 Rev. A. Is HPSA giving you this update? What fan is making noise? The BIOS update does add fan control for graphics cards. You can open details to see. Then click on more details for more stuff. The previous versions of this update are: A0.27 Rev.A and A0.14 Rev. A. Are you using one of these now? Have you tried setting BIOS to defaults? This is okay unless you have made changes that would cause boot (Secure boot/Legacy boot mod for different graphics card) problems. You can stiil do but would have to make change again . Grzy 

Read other 1 answers
RELEVANCY SCORE 47.2

I just got rid of Win8 and installed Win7 Ult on my HP H1818 pc. I can open up the vision Engine Control Center, but have no options to scale my display.
The video card is an AMD 6450. I have tried the 13.8 and the non beta driver.
It was there in Win 8. I use this PC as a media center and it is hooked up to my Samsung led TV. The overscan is killing me, I cant see the egdes of the screen to max/min windows. ETC.

I have completely uninstalled all AMD graphic driver and Catalyst Control Center and reinstalled with the same results.
The computer is hooked up with HDMI to receiver to TV input. THis worked fine with Win8.

Help

A:No option for scaling with ATI catalyst control center

85 views and no one has any suggestions.??

Read other 3 answers
RELEVANCY SCORE 47.2

I had installed AMD ATI driver version 14.4., which worked just fine, but when I saw a new version of 14.9. I decided to install it, and the problems started.
When I wanted to install 14.9. there was no other option to install but just AMD Catalyst Install Manager.
I decided to install 14.4. version back, but this time in 14.4. version were no other options than AMD Catalyst Install Manager aswell.
I tried everything! I unistalled completly AMD drivers, completly unistalled Intel drivers, did several times everything, and because nothing worked, I reinstalled windows thinking this has to solve all problems.
But nothing was solved. I still have problems AMD ATI driver (no matter which version) shows me just AMD Catalyst Install Manager option to install.
Any advice?

Thanks.

A:No option to install Catalyst Control Center

Hi Welcome to Seven Forums ... What is the Model Number of your Laptop ? ....

Does your Laptop have Duel Graphics ? .... A lot of Hp Laptops come with Graphics and Chipset Driver rolled into one ...

It might be best to get your Driver from the Manufactures Website ....

Read other 2 answers
RELEVANCY SCORE 47.2

I would like to uninstall a number of programs which I think may be running on start up - the problem is there is no uninstall option when I click on the program in the control panel there is no uninstall option in the program group. Some programs have this option - some dont.

The programs include Yahoo Messenger, McAfee Anti Virus, Norton Internet Security and a few more.
 

A:There is no option to uninstall many programs in Control Panel

Read other 13 answers
RELEVANCY SCORE 47.2

I have XP Home SP3 generally running quite nicely but the other day I noticed when I opened Control panel that the Task Pane no longer gives the option of viewing it in either Classic view or category view.

I have it set for classic view as this is my preference. So there is no problem from my angle. It's just not possible to switch back to category view if I ever choose to in the future.

Kelly's Korner gives a tweak to set the view either way but this does not reinstate the option on the task pane.

Just in case someone is going to suggest it, No I can't do a system restore because it is turned off.

Any help with this would be appreciated.

Cheers

A:Control panel no longer gives a viewing option

Hello jackisback

This may be what you are looking for.

Open Control Panel > click tools > select Folder Options > under General tab select

"show common tasks in folders"

This should get the task pane back if you want it back in the future.

Hope this was helpful

Read other 4 answers
RELEVANCY SCORE 47.2

Hello All,

I have been trying to solve a Zone Alarm problem, but the fix seems to have turned into a Windows problem. I hope someone can help me.

I've used ZoneAlarm Security Suite for several years now, but during the past year I have been unable to install upgrades. Usually the process gets stuck during the uninstall of the old version. SO this time I tried to manually uninstall first. It seemed to work (via Add/Remove Programs) and then I tried installing the new version, but it got stuck while copying files over.

On the Zonealarm Forum I got some help from someone who gave me some instructions to follow to "completely" uninstall all zonealarm (zonelabs) files. Following these instructions (which I'll post below) appeared to have removed Zonealarm, but I still could not install the new version - it got stuck at the exact same point while copying files over.

So now I don't have the old version and can't install the new version.
Now to the Windows problem. (Thanks for your patience)

Everything else on my PC seems to be working fine. Email, internet, other programs...but then I went to use Photoshop Elements and it started up by showing me the user license and asking for acceptance (which it hasn't done since I installed it over a year ago). I accepted it and then got the following message:Your Adobe Photoshop Elements username, organization, or serial number is missing or invalid. The application can not continue and must close.So I figured this m... Read more

A:Missing Add/Remove option in Control Panel

Hello and welcome to TSF


Click Start, Run and type REGEDIT. This starts the Registry Editor. Navigate to:

HKEY_LOCAL_MACHINE\SOFTWARE \Microsoft\Windows \CurrentVersion\Uninstall\<Program Name>
( <Program Name> here is Adobe Photoshop Elements)
*
In the right-pane, do the following:

Double-click NoRemove (REG_DWORD) and set it to 0
Double-click NoModify (REG_DWORD) and set it to 0

If NoRemove is set to 1, the Remove button will be unavailable
If NoModify is set to 1, the Change button will be unavailable
info

This should help with Adobe Photoshop Elements.

Now, for ZA.

Try using the Windows Installer CleanUp Utility. As long as you installed the application using the Windows Installer, this utility will remove all the folders, files, registry keys, and entries from your system and allow you to start over with a clean slate.

Download the Windows Installer CleanUp Utility
Locate and run msicuu2.exe to install the Windows Installer CleanUp Utility.
Locate and launch the Windows Installer CleanUp Utility on the Start menu.
From the Windows Installer CleanUp Utility window, locate the application in the list and click the Remove button.
Once the application has been removed, click the Exit button to close the utility.

Read other 6 answers
RELEVANCY SCORE 47.2

Hi, A few days ago, I made a small purchase.
I bought 2x ZOTAC nVidia GTS 450's and a SLi Bridge connector.

I've read around that the SLi enable option should be available under the 3D section, with the PhysX configuration, but it's just simply NOT there.

Even GPU-Z says that SLi is disabled!

The video cards are installed, I disabled my onboard video from my Motherboard Bios.
But still, it does not let me SLi those bad boys to squeeze max performance out of my pc.

What should I do?


Code:
Video Card:
2x http://www.newegg.ca/Product/Product.aspx?Item=N82E16814500187&cm_re=ZOTAC_GTS_450-_-14-500-187-_-Product

Code:
SLi Bridge connector:
http://www.directcanada.com/products/?sku=10450BD3820&vpn=SLI-12CM&manufacture=ARCTIC%20COOLING

A:Dual GTS 450's in SLi. Option does NOT appear in nVidia Control Panel.

For starters you cannot run SLI on an AMD chipset, you need a motherboard with a Nvidia chipset. Short of replacing your motherboard or running a single card, there isn't much you can do other than returning the cards and going with a single card or getting two AMD cards to run in Crossfire if you want dual cards.

Personally I would return them and go with a single card. For what you paid for those two (or at least the price on Newegg at the moment) you could have got a GTX 470 or HD 6950, either of which performs about the same (or a bit faster in some cases) as 2 GTS 450's in SLI.

Read other 1 answers
RELEVANCY SCORE 47.2

Dear Team,

I want to disable Date Time Option of Control Panel in Administrator User of Windows 7 on more than 100 Individual Computers which are located on different Places.

I can do with help of Group Policy on Single Computer but I want now Automated Process (Like Batch File etc.) which I can made and run on Multiple Computers to Enable and Disable Date Time Option of Control Panel

Please Support for same.

Regards,
Harvinder Singh

Read other answers
RELEVANCY SCORE 47.2

Hi
Ive just switched From win 2k to xp pro (no sp yet) so i hope this isn't just me being dumb

I'm trying to resolve some hardware issues by installing / reinstalling but when i go to the control panel all there is is "ADD HARDWARE"

unless I'm mistaken this panel should read add remove hardware? This is the same for all user accounts including the default administrator account which i have never used or altered.

Please could someone give me a clue as to how to restore this option, or let me know if I'm being dim and its supposed to be that way.
 

A:Solved: missing control panel option ???

Read other 6 answers
RELEVANCY SCORE 47.2

Recently I started getting the message "This file does not have a program associated with it for performing this action. Create an association in the Folder Option Control Panel" when trying to access several files such as Favorites, shortcuts, my databases, etc. and I don't know how to eliminate the error messages. Any help?
 

A:Solved: Folder Option Control Panel

What file or program are you having a problem with?

---------------------------------------------------------
 

Read other 2 answers
RELEVANCY SCORE 47.2

My Control Panel has for some unknown reason changed from showing the Icons and Titles in rows, left to right to a single column list. I cannot get it to view in the manner I prefer (left to right in rows). There used to be a clickable way to change it back and forth but nothing is allowing that change anymore.
Edit addition: I also notice that in Control Panel I no longer have a "Display" icon.
 

A:Solved: Control Panel view option

Read other 7 answers
RELEVANCY SCORE 47.2
A:Not able to open Add/Remove option in COntrol panel

hai....

os windows 2000 pro if u want to shutdown the system auomatically rastart the system but not shutdown. what kind of problem pls anyone idea please tell.

Read other 2 answers
RELEVANCY SCORE 47.2

Hi, I came across this issue while trying to solve another, the issue of the annoying on-screen caps lock indicator (solved using this method). Many of the solutions I found involved going to control panel-->Display and choosing "Advanced settings" or right click on desktop-->screen resolution-->advanced settings.  My computer does not have a "Display option" in the control panel:It also does not have an "Advanced settings" or similar option in the display settings in the settings menu/through right clicking on the desktop and selecting screen resolution. Why is it seemingly impossible for me to edit anything to do with the display beyond a very basic level? Thanks. 

Read other answers
RELEVANCY SCORE 46.8

The LED lights on the front of my HP Envy Phoenix 860 only change colors in Red and Green even if those colors are not any of the 4 colors I have chosen in the HP Phoenix Control software.  There are no settings or other menus in the Phoenix Control software.  Just the 4 different modes.  Trying each mode the colors never change to anything but Red and Green.  Turining it off and back on has makes no difference either.   Based upon the Programs and Features area the version of HP Phoenix Control software that came installed on my computer is 1.1.1. I know Christmas is coming up but only Red and Green all the time is gonna get old. Thanks for your help. Scott

A:HP Phoenix Control for LED Lights on Envy 860

Hello @Scott1515?, Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums, I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. I read your post about the LED lights, and wanted to assist you! To start, can you provide me with teh Product Number of the desktop?  Here is a link you can use that will help you find your Model and Product Number:How Do I Find My Model Number or Product Number? In the meantime, have you tried using the HP Support Assistant, to check for updated drivers?  Did you always have this issue, or did it just start to happen recently?  Looking forward to your reply. Have a great day!

Read other 9 answers