Over 1 million tech questions and answers.

Netgear router: Can connect to Internet, but can't connect to http://192.168.0.1

Q: Netgear router: Can connect to Internet, but can't connect to http://192.168.0.1

Hi,

I just got my Netgear router WGR614 v6. I was able to initally access http://192.168.0.1 to finish setup. Setup was successful but then whenever I started my IE, intead of loading my homepage, it will only load the Netgear login page while displaying my default homepage's address. But it has no problem connection to any other website.

So I restarted my laptop and reset my modem and router. After that,
I can no longer connect to http://192.168.0.1. The IE only displays this Dell page: http://www.google.com/hws/dell-usuk-rel/afe?hl=en&channel=us&s=http://192.168.0.1/
stating "Sorry, we couldn't find http://192.168.0.1/. "

I'd like to know How can I connect to http://192.168.0.1/ again because as soon as I unplug the cable from my router to the laptop, I lose internet connection.

Please help. Thanks much in advance!

RELEVANCY SCORE 200
Preferred Solution: Netgear router: Can connect to Internet, but can't connect to http://192.168.0.1

I recommend downloading and running Reimage. It's a computer repair tool that has been proven to identify and fix many Windows problems with a high level of success.

I've used it in the past to identify and fix everything from blue screens (BSOD's), ActiveX errors, corrupt files and processes, dll/exe/sys errors, recover lost memory, Windows update problems, defragging, malware removal etc.

You can download it direct from this link http://downloadreimage.com/download.php. (This link will automatically start a download of Reimage that you can save to your computer.)

A: Netgear router: Can connect to Internet, but can't connect to http://192.168.0.1

Read other 13 answers
RELEVANCY SCORE 99.6

I have an old netgear router that my tech support is expired on. I hooked it up to my computer, but cannot connect to the internet. Do you have any suggestions on what I might need to do to make it work?
 

A:Can't connect to internet with Netgear Router

Read other 9 answers
RELEVANCY SCORE 98.8

dgn2000 netgear router will not connect to internet. I reset it but got rid of the red light in the internet but now there is no light. How can i get connected to the internet.


 

A:dgn2000 netgear router will not connect to internet

That's an ADSL modem/wireless router combination unit, right? Is this your initial attempt to set it up, or was it working previously?

By reset to you mean a simple restart or do you mean a reset to factory default settings?
 

Read other 1 answers
RELEVANCY SCORE 98.8

I have a WGR614 v6 Netgear router. The router was working fine then wouldn't connect to the internet. When it was working properly, only the number 4 was lit. Now numbers 1-4 are lit and it does not reset when I hold down the reset button. Please help!
 

A:Netgear router won't reset or connect to internet

If you hold the reset button for 15 seconds with power on and it doesn't recovery, I suspect it has simply died. I'm guessing you don't have devices connected to all four ports, right?
 

Read other 1 answers
RELEVANCY SCORE 98.8

I've just purchased a Netgear N150 usb wireless adapter to use with my DGN1000 wireless ADSL2+ modem router,
I can access the router's web-based interface wirelessly and wireless networks are visible from the Control Panels Manage Wireless Networks but I can't connect to the internet even though my wired connection works, I have no SP installed on my x64 bit OS.

My ISP's technical support couldn't help, the problem doesn't appear to be the signal strength or the wireless network mode which I have configured as 802.11g or 802.11b, do I need to tweak my routers wireless settings in some way or this is an OS issue?

A:Can connect wirelessly to Netgear router but not to the Internet

Are you saying you don't have SP2 installed? If not, you should install SP1 and then SP2 before trying to troubleshoot the problem you described.

Read other 3 answers
RELEVANCY SCORE 97.6

After months of paying $55 a month for Comcast cable, I've decided to give cheaper Qwest DSL a try. My cable setup is D-Link DCM-202 cable modem -> Vonage VT1005V voice terminal -> Netgear MR814v2 wireless router. With cable service my Vonage worked fine as did the wireless router/internet for my laptop.

I just replaced the cable service with Qwest DSL (with GT701 DSL modem). DSL works fine if I connect my laptop directly to the DSL modem. When I add the Vonage modem and the wireless router, I can't get to internet anymore (wireless). Vonage still works fine and I can access the wireless router from my laptop, but can't get to internet.

Any help would be appriciated.
 

A:Can't connect to internet using Qwest DSL/Netgear wireless router

Read other 9 answers
RELEVANCY SCORE 97.6

Not my week so far yet another problem. Been trying all day to connect to the internet with the above router. Happened accross a screen saying Firewall settings.
It says for the inbound services "BLOCK always" is this my problem?
I have tried to amend this to " ALLOW always" to which the outbound services are already set.
My next problem is it is asking for the inbound services to be adjusted so I have setthe service parameter to ALL, action ALLOW always but now is the problem it wants an address putting into the 4 boxes for the Send to LAN Server parameter
I have tried various setting but to no avail. Exactly where can I get this information from?

Sorry if it's not overly clear but I'm a heathen when it comes to this sort of thing.
Thanks

A:Netgear DG834v3 router fails to connect to the internet.

Goto back to factory settings and try to connect. Then modify one value at a time and test.... if you don't what you're doing

Read other 5 answers
RELEVANCY SCORE 97.6

I have a netgear router and i cant get it to connect to the internet through my comcast rca modem. i have tried the power cycle thing many times and the ipconfig/release / renew but nothing. i haven't tried the mac address thing but i need step by step instructions to do it because i am not very tech smart. Also i might not be turning my modem off all the way. the light still blinks but i am not sure how to turn it all the way off. Can anyone help?
 

A:Solved: My Netgear router wont connect to the internet.

Read other 7 answers
RELEVANCY SCORE 97.6

Hello! Trying to get my Netgear N600 router to connect to the internet...nothing will get it to connect. Please help...I am able to follow step-by-steps to resolve this. Any ideas much appreciated...please let me know what info you need to start!
 

A:Solved: Netgear N600 router won't connect to internet

Read other 16 answers
RELEVANCY SCORE 97.6

Hello,

I have had this router for a few years and I have just moved it to the right place in the house, namely connected to the main phone socket... The desktop connected to the router via an ethernet cable is doing fine... Before I moved the router, my 2 wireless laptops were connecting fine as well... since I did this, they first showed limited connectivity, so I set the IP addresses up manually... they are now connecting to the network/router wirelessly, but I cannot connect to the internet; when I try to open Mozilla or Explorer, I get the message "server not found"... I tried everything, restarted the router, rebooted my laptops, but no luck... My operating system is Windows XP family on the desktop and Professional SP2 on the laptops ... any ideas would be welcome...
Thank you...
Solveig
 

A:Have a Netgear DG834G router and cannot connect wirelessly to internet...

so I set the IP addresses up manually... they are now connecting to the network/router wirelesslyClick to expand...

By "connecting" do you mean simply broadcasting on the same channel, or do you mean actually communicating with the router (confirmed by ping or accessing the configuration pages)?
 

Read other 1 answers
RELEVANCY SCORE 90.8

My browser is IE8. Window XP Home with SP2 (Sony VAIO Desktop PCV-RS420, Pentium-4, 2.8 Ghz, 512MB Ram). I am now unable to connect to the Internet. The network diagnostic for window XP kept saying to check firewall settings for HTTP(port 80), HTTPS(port 443), and FTP (port 21).  I don't know how to do that. I open the Window firewall settings on the Security Center page (Exception tab), it lists programs and services on the "Exception", ie, to not block incoming network connection from these programs or services, which include "Internet Explorer",on the list, which seems to be appropriate.  But my computer still will not connect to the Internet--very frustrating.  I  have done "System Restore" a few times to an earlier dates, thinking maybe the computer picked up some virus and the System restore function should temporarily resolve that issue.  But still no luck.   Finally, I tried connecting to a secured website with "HTTPS" in the address bar and the computer appeared to be successful to connect to these HTTPS sites, but it continued to refuse to connect to a regular website(i.e. with "HTTP" in its address bar).  Please help me resove these internet connection issues I would vey much appreciate.
 
 

A:Internet Explorer will not connect to HTTP, but will connect to HTTPS

<<My browser is IE8. Window XP Home with SP2...>>
 
May have nothing to do with your problem...but you really need to install SP3 and all critical updates since its issuance...that may take care of your problem, but even if it doesn't...your system will be less vulnerable.
 
Installing or reinstalling SP3... has been known to overcome various previous system problems.
 
Sounds to me like corruption affecting non-secure websites, so you may also want to reinstall IE8.
 
Louis
 

Read other 5 answers
RELEVANCY SCORE 86

I have a lenovo u160 running windows 7, a couple of days ago it seemed my computer was infected with something, giving a series of security warnings I had not seen before (not av security suite). It slowed the computer down for a few minutes.

After closing these messages, there seemed to be no problem, but then my computer was no longer connect to the internet. It connects to our router/wireless network, but not to the internet.

I tried resetting and unplugging the router and the modem, but still no luck. We have two other computers on the same network that are connecting to both the network and the internet.

I tried running rkill and malwarebytes twice and no malicious items were detected.

I restored the computer to an earlier point (2-3 days earlier)

On the toolbar in the bottom right of the taskbar, it shows a 5 white signal bars, with a "!" inside a yellow triangle.
If I click on the network button it states it is "connected" to the network. It describes the connection as "excellent" (4-5/5 bars).

Above the display of the available networks, it states

"currently connected to:
Unidentified network
No Internet access"

I am not computer savvy and have not run into this problem before. Thanks for your time and help.

A:possible infection, now can connect to router/wireless network, but does not connect to the internet

Hello,And welcome to BleepingComputer.com, before we can assist you with your question of: Am I infected? You will need to perform the following tasks and post the logs of each if you can.Malwarebytes Anti-MalwarePlease download Malwarebytes Anti-Malware and save it to your desktop.Download Link 1Download Link 2MBAM may "make changes to your registry" as part of its disinfection routine. If using other security programs that detect registry changes (ie Spybot's Teatimer), they may interfere or alert you. Temporarily disable such programs or permit them to allow the changes.Make sure you are connected to the Internet.Double-click on mbam-setup.exe to install the application.
For instructions with screenshots, please refer to the How to use Malwarebytes' Anti-Malware Guide.When the installation begins, follow the prompts and do not make any changes to default settings.When installation has finished, make sure you leave both of these checked:Update Malwarebytes' Anti-MalwareLaunch Malwarebytes' Anti-MalwareThen click Finish.MBAM will automatically start and you will be asked to update the program before performing a scan.If an update is found, the program will automatically update itself. Press the OK button to close that box and continue.If you encounter any problems while downloading the definition updates, manually download them from here and just double-click on mbam-rules.exe to install.On the Scanner tab:Make sure the "Perform Full Scan"... Read more

Read other 13 answers
RELEVANCY SCORE 86

Ok, let me start by saying that I am not that experienced with networking lingo so any responses should be as simple as possible. Pretend you are speaking to a 2nd grader.

I have searched a many of pages but have not found a solution to my problem. I recently purchased and successfully installed a NetGear N600 dual band router (WNDR3400). My desktop has no connection issues. My iPod Touch has no issues connecting to the wireless network. However, my phone (HTC Aria), my work computer (Dell Latitude D630 Win XP) and my brand new HP Slate 500 (Win 7 Pro) cannot connect to the network. The network is discoverable by all the devices but the 3 cannot connect. I removed all security and still was not able to connect. I reinstalled the router and still not able to connect. I restarted the router and still not able to connect. The Dell did previously connect to unsecured networks in my neighborhood but does not seem to like my newly set-up network. I am most surprised that the Slate is unable to connect to the wireless network. I would think something brand new would like that would not have an issue. If I cannot get my wireless router working properly and my other computers able to connect to it, it makes them all pretty useless. I'd appreciate any help anyone may be able to provide me.

Thanks in advance for your time and help!!

-Andrea
 

A:Unable to Connect to NetGear Router

Read other 6 answers
RELEVANCY SCORE 86

We recently connected the Netgear WNR2000 to our modem. All wireless devices connect just fine, except for our Roku XD. It says there is an activation error. I've reset the box, unplugged, changed the channel via wireless settings. What's next??? I'm quite frustrated and would like to get this to work. The message I get is "activation issue. There was a problem connecting to the Roku server". Argh!! It was working fine with the other wireless modem/router (versalink 327W), but it kept going off (as in the signal would drop and we would have to turn it off/on to get it to work) and connected the netgear router to it today. So now the wireless signal is fine and all other devices connect, but the Roku won't work.
 

A:Roku won't connect to netgear router

Read other 7 answers
RELEVANCY SCORE 86

I'm posting from my phone because right now its my only access.

I have a Netgear Router model number WNR2000
I have a Gateway GM5260 model computer using windows xp.

I am currently trying to connect to my awesome neighbor's wifi connection that they so lovingly bestowed on me and my family the other day.

Herein lies my problem:
I cannot get their router and my own to connect. I'm a networking noob and could really use some assistance.
I've got a their wireless password, my router, and my ethernet cable connecting my router to my pc.
Do I need to pick up a wireless antenna to connect to my router as well?
Should I have my neighbor push the connectivity button on his router?
Dunno where to go from here.
Please help!
Thanks be in advance to anyone who understands wtf I'm going through and knows how to fix it
 

A:wifi connect using netgear router

I am currently trying to connect to my awesome neighbor's wifi connection that they so lovingly bestowed on me and my family the other day.Click to expand...

Actually they are breaking the ISP agreement in most countries.
The agreement will state that the broadband can only be used in one premises , this is so that people cannot provide neighbours with wifi ....

so as this is also against our rules - closing post

http://www.techguy.org/rules.html
WiFi "Piggybacking" / "Wardriving" - We do not support the act of using someone else's Internet without permission. Also, please note that almost every ISP prohibits sharing your Internet connection with another home, and we will not assist you in breaking their rules.Click to expand...
 

Read other 1 answers
RELEVANCY SCORE 86

I have trouble connecting to my NETGEAR router. For example on day it would connect and stay stable for a few hours then i cant connect to it for a few hours, then the next day i can get on it, any idea on how i can get it to connect to consistently?
 

A:Can't consistently connect to NETGEAR router

update the firmware on your modem, router, and wireless adaptor (if any) and
update the NIC driver.

Then monitor for reliability.

I have a wired netgear router and after updating, it has been 100% reliable for
more than a year.
 

Read other 1 answers
RELEVANCY SCORE 85.2

Hi there, I'm having a bit of an issue with one of my computers. It's fairly new, running on Windows Vista.

I am able to connect to a wireless router (Belkin), but I am not able to connect to the internet on this one particular computer. Another desktop computer on the network is able to access the internet. I just get the error "Internet Explorer cannot display the page" on the laptop whenever I attempt to open IE.
I've read through quite a few similar problems on other sites, but have yielded no solution. Any suggestions?
 

A:Able to connect to wireless router, but unable to connect to the internet.

Read other 7 answers
RELEVANCY SCORE 85.2

I have just rebuilt a laptop for a friend. I downloaded the latest drivers for the wireless connection from Acer website. They have installed correctly.

I can connect the laptop to the router by wireless and I can browse the local network and see the other PC's BUT the internet is shown as not connected. Windows 7 Home Premium 64Bit. Other wireless devices (iPad for instance connect to the internet fine).

I have re-booted the router.

Anyone got any ideas?
 

A:Solved: Unable to connect to internet but can connect to router.

Same with an ethernet connection?

Open a (black) Command Prompt window:
Hold the Windows logo key and press r; in the Run box type cmd and click on OK.

Type the following commands:

IPCONFIG /ALL

[Note that there is no space between the slash and ALL.]

ping 8.8.4.4

ping yahoo.com

Right click in the command window and choose Select All, then hit Enter.
Paste the results in a message here.

If necessary use a text file and removable media to copy the results to a computer with internet access.
 

Read other 3 answers
RELEVANCY SCORE 84.8

I have just set up a NETGEAR WPN824 wireless router and I am now having trouble connecting to it wirelessly. I am able to connect to it fine wired to my desktop, running xp, but when I try to connect on either my laptop, running OSX, my ipod touch, or even my desktop using a wireless adapter I am unable to connect. I have tried removing all security, and they still are unable to connect. I can see the network just fine on any of the devices, but when I try connecting it tries for a few seconds then just gives up. Any help would be most appreciated.
 

A:Solved: Not able to connect to NETGEAR router on any device

Read other 11 answers
RELEVANCY SCORE 84.8

Help me please! First of all, I'm not very good with computers and all of the terminology. I have Virgin Media connected and recently bought a Virgin Media Netgear Router - WGR614. I have tried and tried to connect this and configure the router to my laptop but it just won't work! I have used the Netgear website instructions and the Virgin Media Wireless set up CD but still no luck. It did come up on my list of available network connections at one stage but could not 'acquire the network address'. Now I can't even get it up on my available network list.

I have reset the router many times, disconnected and connected everything. I'm thinking maybe I have to do something else on my pc to allow the wireless connection? I have used wifi before on this pc and have had no problems at all.

Virgin Media will not help at all since I already have an internet connection so I don't know what to do. Can anyone help me?
 

A:Can't connect my Netgear cable router to my laptop

Please supply the following info, exact make and models of the equipment please.

Name of your ISP (Internet Service Provider).
Make and exact model of the broadband modem.
Make and exact model and hardware version of the router (if a separate unit).
Make and exact model and hardware version of any other network equipment, like a repeater, a booster, hi-gain antenna, etc.
Model numbers can usually be obtained from the label on the device.
Connection type, wired or wireless.
If wireless, encryption used, (none, WEP, WPA, or WPA2)
Version and patch level of Windows on all affected machines, i.e. XP (Home or Pro), SP1-SP2-SP3, Vista (Home, Business, Ultimate), etc.
The Internet Browser in use, IE, Firefox, Opera, etc.


Please give an exact description of your problem symptoms, including the exact text of any error messages.


If you're using a wireless connection, have you tried a direct connection with a cable to see if that changes the symptoms?
For wireless issues, have you disabled all encryption on the router to see if you can connect that way?
Have you connected directly to the broadband modem to see if this is a router or modem/ISP issue?
If there are other computers on the same network, are they experiencing the same issue, or do they function normally?


On any affected computer, I'd also like to see this:

Hold the Windows key and press R, then type CMD (COMMAND for W98/WME) to open a command prompt:

Type the following commands on separate lines, fo... Read more

Read other 1 answers
RELEVANCY SCORE 84.8

I changed internet companies. I had comcast and went to verizon. I have a Westell modem model 6100G and a netgear wireless router model number WGR614 v5. I need help connecting the two. I can get the internet through just the modem..but not wen I hook it up with the router..help please Heidi
 

A:how to connect netgear router to verizon dsl modem

Hierhaps this link can help.

http://kb.netgear.com/app/answers/detail/a_id/1080
 

Read other 1 answers
RELEVANCY SCORE 84.8

Hello,My router keeps tripping out so that I cannot connect my or other computers on the network to my internet. So I have to disconnect the router to get internet. I think something his blocking the router to my computer - I keep reinstalling my firewall, powering down the modem and router and restarting the pc but nothing seems to work.
Can you help?
 

A:NETGEAR ROUTER MR814V2TW does not connect to network

Read other 11 answers
RELEVANCY SCORE 84.8

I've just bought a Samsung N145 netbook running Windows 7 Starter. I can't get it to connect to my Netgear router (WGR614). The wireless utility can see my network but when I try to connect to it I get an error message saying there's a problem with the access point but the help files don't actually help.

My Dell laptop can connect OK and the netbook connects via an ethernet cable. I've checked online and my router should be compatible with the notebook and I've also checked for updates to the router software.

I've also tried turning off the WEP encryption on the router and the netbooks firewall without success.

Can anyone suggest what I could try to get connected?

A:Can't connect Samsung netbook to Netgear router

Can you copy the exact error to this thread?

Have you tried resetting the modem and Router in order?

Read other 6 answers
RELEVANCY SCORE 84.8

Recently switched to DSL from Cable. Ironically, the problem was present even when I had cable, but now I must solve it once and for all.

I was able to get my DSL connection working (Westell 6100 modem) and imy desktop is wired to my router (Netgear WGT624 V3). However, for some reason, my laptop is unable to connect wirelessly. This was also happening when I had cable as well.

I know it is not the laptop, since I bring it to work and other places, and it connects fine. I checked to make sure my security settings match those of the network, and they do. I even tried resetting the router, taking off encryption, and none of those have worked. By the way, the name of my network is listed when I "View Available Networks". It's just that when I try to connect, it doesn't connect. I am using an Intel program to control the wireless adapter, instead of the Windows-based one. I even switched it off and tried the Windows default one, but that still doesn't work.

I really don't know what to do. Any suggestions? Your help would be greatly appreciated. Thank you!
 

A:Cannot connect laptop to router Netgear WGT624

Read other 16 answers
RELEVANCY SCORE 84.8

I recently switched internet service providers from AT&T to Time Warner and ever since I have been unable to connect to my Netgear router with my computer's wifi. However, I have successfully connected my TV wirelessly to said router. One other note, my computer's wifi seems to recognize that the netgear router is there but it just refuses to connect me to the internet. Please help me rectify the issue, much appreciated!
 

A:I can't connect to my Netgear router with my computers wifi?

Read other 9 answers
RELEVANCY SCORE 84.8

I use windows 7 home premium. I have updated all drivers and neccessary things to allow the wireless network adapter to recognise the router. However, when i input my WPA2 and do all the required things, i press connect and nothing happens!!!!

Please would someone help immediately!!

Many thanks!

A:Why doesn't my netgear W111v2 connect to my router?

Are you using the auto generated network password or did you make up your own password?

Read other 9 answers
RELEVANCY SCORE 84.8

I have recently purchased a new Compaq Laptop and can not connect to my wireless Netgear Router. The laptop can see the router when you go to Network connections but will not allow me to connect. I ahve configured the router and using WPA-PSK and have entered new passphrase. I have also ammended the settings on the network connection on the laptop to reflect the same. I still however cant connect - says "cannot connect to Network" Has anyone got any ideas what I am doing wrong am a novice with laptops and wireless connections. Thanks
 

A:Laptop cant connect to wireless Netgear Router

Read other 8 answers
RELEVANCY SCORE 84

Hello,
I have a broadband connection with Tiscali (UK) via a USB ADSL WAN adaptor modem. I have had over months now terrible problems with the connection dropping out. Sometimes it will stay up for a day, sometimes it's dropping every hour or so. Very annoying. What's more annoying is that it will not automatically reconnect. If you set it to redial automatically you get a no dial tone error message and you are forced to reboot to get the connection back up. If you leave it for more than an hour, then try to reconnect it usually will. This is not an automatically always on connection from the moment you turn your machine on, you have to manually open the connection. XP classes it as a dial up connection really with ADSL settings.

I've done everything Tiscali has suggested, all the obvious stuff (RJ11 cabling all the way to the modem instead of phone extension cable part of the way etc. etc.), but this is doing my head in now. Good and proper.

So, I've acquired a Netgear DG834G V2 router in the hope that I can get an always-on connection and if this doesn't solve the problem completely, at least if the connection drops out for whatever reason, when the connection comes back it will be resume automatically, so if I'm downloading or whatever it will just carry on.

But I've hit an immediate problem. I've already been using it as my network hub without any problems for a few weeks. But when I tried to go to http://192.168.0.1 as mentioned... Read more

A:Can't connect to Netgear DG834G router to configure for DHCP

eVILRigby said:

...
My machine's address is 192.168.0.1 but I even reset the TCP/IP stack to see if it would resolve the problem and it didn't.
...
Click to expand...

So does that mean you have the IP of the "machine" (your PC??) manually set to 192.16.8.0.1? You need to change that (on the PC) to either be any IP addr, other than 192.168.0.1, in the same subnet or set the PC to automatically get IP from the router.
The DG834G factory setting should be DHCP server by default.
 

Read other 1 answers
RELEVANCY SCORE 84

I have just recently had installed a sky satellite along with the sky+hd service. The sky+hd box is connected to a phone extension line via a filter. All other extensions have filters installed. I have a digital phone connected to the same extension as sky via a second filter. Both filters go into a splitter. Since this has been done I can no longer connect to AOL. I can sometimes connect to the internet via IE but cannot load any web pages apart from those with very few graphics - and loading is excruciatingly slow. If I disconnect the sky+hd box everything is fine. If I leave the sky+hd box connected, switched on but don't switch the Panasonic TV on everything is still fine. The TV is connected to the sky+hd box via an HDMI cable. I am on a BT line, more than 5 miles from the exchange, and according to BT my max available speed is 256k!! I have run broadband speed checker and it gives me download speeds of 464k and upload of 213k. My router is a netgear dg834g and I am running windows vista (SP1 I think).
Any ideas out there? Could it be a bandwidth problem?
thx

A:[SOLVED] aol broadband won't connect, netgear dg834 router, sky+ hd

I don't seem to have 'edit' option yet - maybe because I just joined forum yesterday - so will reply to my own post.
Solution - use TWO filters between extension socket and Sky+HD box. Found this solution on another forum and it works. Apparently using a better quality filter at the main BT socket also works ie. one of those which replaces the faceplate and filters all extensions.

Read other 1 answers
RELEVANCY SCORE 84

Hi there,

It's my first time on this forum so would be delighted if anyone could help me PLEASE! I have just bought a brand new Sony Vaio laptop VPCEH2. I have tried to connect wirelessly to my Netgear router (DG934G). The router and broadband is supplied by Sky. The laptop is running Windows 7. The router is sending a wireless sending fine to our desktop and two smartphones but the Vaio is unable to connect.

The Vaio finds the signal which is says is excellent but does not connect. Using an ethernet cable the internet connection is fine. I have been on the phone to Sky for nearly 2 hours across two nights and they have given up. We have tried setting up a new router password, disconnecting and reconnecting, establishing a connection in the Network and Sharing Cente using WPA security with no joy. I asked them if the router needed a firmware upgrade for Windows 7 and they were adamant that it did not - the firmware version is currently V2.02.44. I have checked the Windows 7 compatibility listings for Netgear routers but couldn't find the DG934G (or the DG834GT - which I believe is a newer version), listed.

The funny thing is that when Sky did help me to create a wireless connection in the sharing centre is did work for around 30 seconds where I was able to access around 5/6 webpages. The browser then stopped working and the connection was lost (with yellow warning triangle across the signal to bottom right of screen).

I see literally hundreds of people on the in... Read more

A:Sony Vaio can not connect wirelessly to Netgear router

Read other 13 answers
RELEVANCY SCORE 84

Our current Technicolor Modem/Router does not have the wifi range to reach my laptop at my apartment at the house's backyard I recently bought from CompUSA a NetGear NR2000 v3 router which has a repeater function. But so far the results have been less than stellar so the question is do this router only works as a repeater of the same model and brand of router or is it even possible for it to work with a modem/router combo unit such as the Technicolor?
 

A:Is it possible to connect as a repeater a Netgear 2000 v3 router to a DSL modem?

If it has a Repeater mode it should work regardless of the brand of the other WAP or wireless router (unless the manual says that it doesn't). But can be much tougher to get working. Do you have it positioned at a place where the laptop gets a strong signal?

Is your problem with getting the Netgear to connect/repeat? Or its signal strength is too low when you try to use the laptop at the desired location? Or ... ?
 

Read other 2 answers
RELEVANCY SCORE 84

I have SBC Yahoo DSl and am using the modem Speedstream 5100(not 5100b). I am currently having trouble successfully connecting my modem to the router and having connectivity to any computer on the network. I have read countless forums and guides about reconfiguring your modem or router to Bridge mode or something like that. All usually say something about connecting directly to your modem and typing "192.168.0.1" or .254.254. I've tried them all and none of them will ever connect to anything(nothing shows up).

I have also read that it is difficult to connect a router to a Speedstream 5100. Please someone help me!!! this is so frustrating!!
 

A:HELP! 5100 speedstream will not connect with Netgear wnr200v3 router

would you do a full power cycle and connect your PC directly to the Speedstream 5100 and post an ipconfig /all
------------------------------------------------------------------------

How to power cycle

&#8220;power cycle&#8221; process to reboot or reset the modem/router

Switch off all the devices modem, router and computers also unplug their power cables.
Wait at least 30 seconds.
Plug the power cords back in, but don&#8217;t switch them on.
First turn on the modem and then wait for a few minutes for it to settle and all the lights to become stable.
Next switch on the router (if a seperate device ) and then wait for a few minutes for it to settle and all the lights to become stable.
Now turn on your computer, You should now be able to access the Internet.
------------------------------------------------------------------------

------------------------------------------------------------------------
ipconfig /all
If you cannot access the internet with this PC, then you will need to paste the results into something like notepad and then copy onto a machine that can access the internet and post results here

We would like to see the results from ipconfig /all post back the results in a reply here

Hold the Windows key and press R, then type CMD then press Enter to open a command prompt box (A new dialogue box - black with white font, will appear on screen ):

In the command prompt window that opens, type the following command:

Note that there is a... Read more

Read other 1 answers
RELEVANCY SCORE 84

Hi everyone!

I've come across a problem connecting my laptop to my Netgear R6300 router. It all started out of the blue, yesterday. For some reason my laptop refuses to connect to the router. It sees the SSID, but when you try to connect it will error out stating windows can not connect to.

I tried power cycling the modem, router, laptop. No dice there.
Tried resetting the router. Nope.
Tried using a restore point to go back to before I updated recent windows updates. Didnt work.
Tried uninstalling the wireless card through the device manager, rebooting, reinstalling. Didn't work.

I'm currently on my desktop, which is wired. No issues there. Also my tablet and cellphones connect to the router without any problems. It's only the laptop. This lead me to believe possibly a faulty wireless card inside (which would suck). So I setup my cellphone as a hotspot. Sure enough, the laptop connected just fine!

Something is getting in the way of the laptop and router not playing nice with each other.

Running Win 7 64bit
Norton Antivirus

Any other ideas?

A:Laptop suddenly will not connect to Netgear R6300 router

  
Quote: Originally Posted by foxhound81


Hi everyone!

I've come across a problem connecting my laptop to my Netgear R6300 router. It all started out of the blue, yesterday. For some reason my laptop refuses to connect to the router. It sees the SSID, but when you try to connect it will error out stating windows can not connect to.

I tried power cycling the modem, router, laptop. No dice there.
Tried resetting the router. Nope.
Tried using a restore point to go back to before I updated recent windows updates. Didnt work.
Tried uninstalling the wireless card through the device manager, rebooting, reinstalling. Didn't work.

I'm currently on my desktop, which is wired. No issues there. Also my tablet and cellphones connect to the router without any problems. It's only the laptop. This lead me to believe possibly a faulty wireless card inside (which would suck). So I setup my cellphone as a hotspot. Sure enough, the laptop connected just fine!

Something is getting in the way of the laptop and router not playing nice with each other.

Running Win 7 64bit
Norton Antivirus

Any other ideas?


It sounds like you covered most of the obvious problems here.

Did you try deleting the old wireless connection profile then create a new one with the current SSID, password etc. You can do this through the Network and Sharing Center, then left side go to "Manage Wireless Connections" Sometimes the profiles get corrupted and need to be redo... Read more

Read other 9 answers
RELEVANCY SCORE 83.6

I feel bad for starting a new thread on the subject, but I looked through a bunch of the other threads and I couldn't find a solution.

I am on a Dell Laptop (Latitude D600)
And I'm running Windows XP Ver 5.1 Service Pack 3
My ISP is Speedlink Cable
We are using an SMC modem/router SMC8014WN

My roommate can connect to wirelessly, and I can connect with a hard wire connection. I also can connect to the router (full speed), but I get limited or no connectivity to the internet.

I connect to the wireless via a 'NETGEAR WG111v2 54Mbps Wireless USB 2.0 Adapter' using the NETGEAR SMART WIZARD - Wireless Assistant WG111v2

When I run IPCONFIG /ALL the output is:

Windows IP Configuration
Host Name . . . . . . . . . . . . : GOAT2
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Mixed
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Broadcom 570x Gigabit Integrated Controller
Physical Address. . . . . . . . . : 00-0D-56-DC-55-46
Dhcp Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IP Address. . . . . . . . . . . . : 192.168.0.11
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.0.1
DHCP Server . . . . . . . .... Read more

A:Can connect to wireless router BUT cannot connect to internet :(

Try putting static IP addresses in to your wireless network connection.
By the looks of it it seems your wireless connection cannot get an IP address automatically via DHCP.

Let me know if this works or you need help doing this.

Read other 12 answers
RELEVANCY SCORE 83.2

I have looked at tons of forums where they have not been able to access http://192.168.0.1/. Most of them have been solved but following what they did hasn't worked for me. My mother was on http://192.168.0.1/ and she set up some sort of security on our router (which is Belkin by the way Belkin_N_Wireless_209CAD). Since she changed it we haven't been able to connect to the internet through our router. When we try to connect this is what shows up.

(By the way, I'm only fourteen so I am QUITE confused by even the things I'm trying to do. But I'm the only one in this household who knows anything about computers)

I tried Start -> Run -> CMD and typing in ipconfig /all. I was looking at another forum where someone posted what they got back. My results looked nothing like that. I cannot even tell what my IP adress is through that sequence of events.

Right now I'm on here because I am manually connected to the router through a wire. That's the only way that I can connect. I'm not sure what to do. So if you can help me, well... Please do!

(This is what comes up when I type in ipconfig /all)
Microsoft Windows [Version 6.0.6001]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.

C:\Users\Annamarie>ipconfig /all

Windows IP Configuration
Host Name . . . . . . . . . . . . : Annamarie-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enable... Read more

A:Solved: Belkin Router/Cannot connect to http://192.168.0.1/

Welcome to TSG
First thing I would do is reset the router to it's default configuration.Usually holding the reset button down for at least 15-30 seconds.
This will reset all settings,including the userid/password.
 

Read other 3 answers
RELEVANCY SCORE 83.2

Hello

I recently got the newest NETGEAR router device, the NETGEAR Nighthawk X8 AC5300 Smart WiFi Router, and I am unable to connect to the 5GHz WiFi it provides on its Tri-band WiFi. I am currently only on its 2.4GHz WIFI, which I assume is lesser than the 5G. I am able to connect to the 5GHz on my smart phone, so I know it exists from the router. I am running a windows 8.1 currently on a desktop on an HP Envy 700-213 Desktop PC.

Edit: My computer supports 802.11b, 802.11g, and 802.11n radio types - which supports 5GHz WiFi
My adapter is a Ralink RT3290 802.11bgn Wi-Fi Adapter

Any ideas for why I am unable to connect to this WiFi?

A:Unable to connect to 5GHz Wifi on NETGEAR Tri-Band Router

The most likely explanation is that the wifi adapter in your HP Envy 700-213 doesn't support the 5Ghz band.

If you really want to connect at 5Ghz you will need to get a new wifi adapter for your computer.

Read other 7 answers
RELEVANCY SCORE 83.2

A few days ago my ISP connection dropped out for a few hours. After the modem/router restart I discovered that all wired devices and some wireless devices can connect but a few of the wireless devices are unable to connect and cannot ping the router. As soon as I plug them in with a wired connection they work. The router is a Netgear N900 with the latest firmware upgrade. Both he 2.4ghz and 5.0ghz connections are set to use wpa2 aes authentication. Even when the ping shows a general failure, the router logs show an access denied message for the Mac address that attempted the ping. When I switch to security none connections work fine. There is also a Sony Bravia tv on the network that was connecting fine before the restart but now will only connect when the network security is set to none. None of the router settings changed. None of the pc settings changed.

The network setup is pretty simple.

Adsl2 modem accesses the Internet successfully.
This then feeds into the wan connection of the netgear n900.
An old vista windows desktop is wired to the netgear and has connectivity
A brother laser printer is wired to the netgear and has connectivity
An asus laptop with an atheros wifi adapter and running windows 7 connects wirelessly to either the 2.4 or 5.0 band and has connectivity
An asus laptop with an atheros wifi adapter and running windows 7 attempts to connect wirelessly to the 2.4 band, doesn't pick up the 5.0 band and has no connectivity until security on the router i... Read more

A:Solved: Some laptops won't connect after netgear n900 router restart

Read other 6 answers
RELEVANCY SCORE 83.2

Hey, Does anyone know how I can connect a Virgin Media Router to a netgear router to let people connect wirelessly?

At the minute the netgear router cannot connect to the internet and the virgin media router is not wireless? Is there a way to merge them both and create some sort of link.

Thanks,
Fearghal

A:Connect Virgin media router to netgear to make wireless?

Hi FMJC001,

It's been a week since your post so you may have resolved your issue. But here is how I have set up:

From the internet to the virgin media modem then via ethernet cable to the wireless router. Then I have connected via ethernet cable to my PC from one
of the LAN ports. But I use my laptop wireless..

Hope this helps

Wizzkid

Read other 2 answers
RELEVANCY SCORE 83.2

Just abruptly, my internet connecton failed. I have been using the router for about 3 years.
When I go thru the set up process thru 192.168.0.1 and hit the test button, it indicates I am "connected to the server" but it wont go any further than that. No "negotiation" after that. Netgear says my password is wrong. That's not correct.
Earthlink seems to think it's a bad router. I've tried the factory reset and that didn't work
I am using Windows 98, but I have been still able to use the router for the last 3 years.
The modem is a 5360 Speedstream.
Can someone help me?
Thank You
 

A:Solved: netgear router mr814 does not connect to Speedstream modem

Read other 8 answers
RELEVANCY SCORE 82.4

I just bought a new laptop, and was going to set it up to my home wireless network(which already has 2 laptops connected through wireless and one desktop through a cable) but every time that I try to connect to the router it asks for additional log on information(Username, Password, Logon Domain) which are not configured for the router, and there are no passwords(that I'm aware of, since I never set them up) for the home network. I've gone into the router and set it to allow my new computers wireless card to access the router, but it continues to frustrate me.

Thanks in advance for any help.
 

Read other answers
RELEVANCY SCORE 82.4

Having problems connecting to NetGear and Belkin wireless routers, that require WEP password.
The wireless connection sees the router, full strength -5 bars, and asks for the password. After I give it twice, it just sits there and does not connnect.

Tried running update driver, but latest one on sony website is the one I have - from 2005

Running XP Home ed, Service pack 2, up to date.

I have not installed SP3 because of possible conflicts with the AMD cpu chipset, and last time I did it crashed the entire system.

Any help appreacated
 

A:Solved: sony vaio VGN FS470/w wireless will not connect to wep netgear router

Read other 16 answers
RELEVANCY SCORE 81.2

Hi All

Recently purchased an Amilo Li1718 running Vista Premium. On trying to connect wirelessly to my Netgear WGT624 v3 I can see all the details of my wireless network (signal strength etc.), if I drop the channel number from 13 to 11, and disable WEP, but cannot connect at all no matter what I try.

I have no problems connecting with a different (DELL) laptop running XP and a Belkin wireless adapter, and I can do the same (connect) with the Amilo. However, I'm at a loss to find a reason and resolution to the lack of connection using the Atheros WLAN AR5007EG device which comes with the Amilo - I don't think it's faulty as it "sees" the wireless network, and others, OK

I've updated the Amilo WLAN driver, tried a few registry tweaks etc. etc. etc. but have had no luck at all.

Can anyone offer any advice on how I might be able to get the Amilo to connect to the WGT624? I've posted on other forums (Amilo, Fujitsu-Siemens who make the Amilo) but no luck at all. And this lack of connection problem with Vista to a wireless network seems to be problematic from what I've seen on the web (anyone confirm?).

I can't provide anymore details about the Amilo setup as I'm at work, but could post back later if someone is kind enough to answer this query. Apologies if I've missed something obvious, but I've been trying to connect for 1 week and have had no luck at all.
 

A:Solved: Laptop running Vista premium cannot connect to Netgear router wirelessly

Read other 16 answers
RELEVANCY SCORE 81.2

Hi guys

Have often browsed this fount of knowledge without actually posting but now I am stumped and really need help...

I have recently moved house and had new broadband installed complete with new Netgear N300 router. Now I am unable to connect to the internet even though my desktop says it can see the wireless network (though it does say it is unidentified). The network connection diagram in Vista suggests the problem is between the internet and the router but I know this is not the case as I have successfully connected other devices via the wireless network. I know the router is N and the card is G but the router should still work with the older card, right?

I have tried to download the latest drivers from Belkin for a version 8 F5D7000 but for some reason they wont install (when I click on the install file it thinks for a second then does nothing). No idea why this is the case.

Could it be anything to do with the fact that the card, being older, is WEP and my router has no option for WEP, only WPA onwards? If so, would the latest driver from Belkin in effect 'upgrade' my card to allow it to carry same encryption as the router?

If I can't solve then I'll no doubt end up buying a new PCI card but I didn't want to have to bother right at this moment.

Any help would be fantastic!

Cheers

Matt
 

A:Cannot connect to wireless network using Belkin F5D7000 card and Netgear N300 router

Read other 11 answers
RELEVANCY SCORE 80.4

I have a D-Link DWL-G520 wireless network adapter for my desktop, and i recentally installed it along with the latest drivers.
the installation had no problems and i am now able to connect to my router and the signal strength is good.

the problem is, it won't allow me to access the internet in any way.
the dynamic IP can never acquire an ip adress.
the static IP says its connected, but it won't actually let me access the internet.

I've tried practically anything from changing my LAN proxy settings to reinstalling all the drivers and the adapter.
help anybody please?

here's my ipconfig /all
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.

C:\Documents and Settings\Justin>ipconfig /all

Windows IP Configuration

Host Name . . . . . . . . . . . . : ----------------
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Unknown
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

Ethernet adapter Wireless Network Connection:

Media State . . . . . . . . . . . : Media disconnected
Description . . . . . . . . . . . : Realtek RTL8187B Wireless 802.11b/g
54Mbps USB 2.0 Network Adapter
Physical Address. . . . . . . . . : 00-08-54-92-8E-FE

C:\Documents and Settings\Justin>ipconfig /all

Windows IP Configuration

Host Name . . . . . . . . . . . . : ---------------
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Unknown
IP Routing Enabled. . . . . . . . : No
WINS... Read more

A:Can Connect to the Router, but can't connect to the internet?

Read other 10 answers
RELEVANCY SCORE 80.4

1. Question: Help please, so i don't know what the problem is but i want to portforward my port and i've tryed hunders of gateways cmd ---> ipconfig i know that but it just says ''Page could not be found'' So do you have any suggestions how can i fix this? I'm using D-Link DWA-125 Wireless N 150 USB Adapter(rev.A2)
And i cannot connect my router it's TCW770. Please i hope someone understands and helps me. So when u help me can u do step by step ur typing so i can understand.

2. Question: If i reset my router TCW770, does it uninstall my D-Link DWA-125 Wireless N 150 USB Adapter(rev.A2)? Because i don't know how to install adapter again. Please answer someone


Sorry for my bad English

A:I cannot connect to my ROUTER but i can connect to internet.

Please someone i'm just 14 years old and i need help with this.

Read other 9 answers
RELEVANCY SCORE 80.4

I'm trying to connect to either of two routers I have. With either one I can connect to internet (obviously... I'm typing this). I can NOT connect to the router itself to update the firmware or change the settings. The URL to connect to each:
Netgear WGR614v6, http://192.168.1.1 or http://routerlogin
Belkin F7D1301, http://192.168.2.1 or http://router
Using any of the four connections, I get a "Connection Failed" message, Network is unreachable. I can't tell what's blocking access to it.
I'm using Mobi to filter internet content, but the IP shows allowed
I'm using Avast Antivirus for the firewall, but it's not showing anything being blocked there.
I've also tried disabling Windows Firewall with no luck.
Any suggestions on where to go next?

A:CAN connect to internet, CAN'T connect to router

Have you tried 192.168.0.1?

Run an ipconfig /all from cmd to find out you default gateway.

That's my default on my n/g upstairs.

You are plugged directly into a lan port?

Always do a factory reset

Read other 8 answers